summaryrefslogtreecommitdiff
path: root/sound/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-27ALSA: aloop: Mark paused device as inactiveRobert Rosengren1-3/+9
Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by: Robert Rosengren <robert.rosengren@axis.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22ALSA: aloop: Fix access to not-yet-ready substream via cableTakashi Iwai1-1/+7
In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22ALSA: aloop: Sync stale timer before releaseTakashi Iwai1-1/+8
The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-30Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-15/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement presents: - A rather large rework of the hrtimer infrastructure which introduces softirq based hrtimers to replace the spread of hrtimer/tasklet combos which force the actual callback execution into softirq context. The approach is completely different from the initial implementation which you cursed at 10 years ago rightfully. The softirq based timers have their own queues and there is no nasty indirection and list reshuffling in the hard interrupt anymore. This comes with conversion of some of the hrtimer/tasklet users, the rest and the final removal of that horrible interface will come towards the end of the merge window or go through the relevant maintainer trees. Note: The top commit merged the last minute bugfix for the 10 years old CPU hotplug bug as I wanted to make sure that I fatfinger the merge conflict resolution myself. - The overhaul of the STM32 clocksource/clockevents driver - A new driver for the Spreadtrum SC9860 timer - A new driver dor the Actions Semi S700 timer - The usual set of fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) usb/gadget/NCM: Replace tasklet with softirq hrtimer ALSA/dummy: Replace tasklet with softirq hrtimer hrtimer: Implement SOFT/HARD clock base selection hrtimer: Implement support for softirq based hrtimers hrtimer: Prepare handling of hard and softirq based hrtimers hrtimer: Add clock bases and hrtimer mode for softirq context hrtimer: Use irqsave/irqrestore around __run_hrtimer() hrtimer: Factor out __hrtimer_next_event_base() hrtimer: Factor out __hrtimer_start_range_ns() hrtimer: Remove the 'base' parameter from hrtimer_reprogram() hrtimer: Make remote enqueue decision less restrictive hrtimer: Unify remote enqueue handling hrtimer: Unify hrtimer removal handling hrtimer: Make hrtimer_force_reprogramm() unconditionally available hrtimer: Make hrtimer_reprogramm() unconditional hrtimer: Make hrtimer_cpu_base.next_timer handling unconditional hrtimer: Make the remote enqueue check unconditional hrtimer: Use accesor functions instead of direct access hrtimer: Make the hrtimer_cpu_base::hres_active field unconditional, to simplify the code hrtimer: Make room in 'struct hrtimer_cpu_base' ...
2018-01-27Merge branch 'timers/urgent' into timers/coreThomas Gleixner1-48/+50
Pick up urgent bug fix and resolve the conflict. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-16ALSA/dummy: Replace tasklet with softirq hrtimerThomas Gleixner1-15/+12
The tasklet is used to defer the execution of snd_pcm_period_elapsed() to the softirq context. Using the HRTIMER_MODE_SOFT mode invokes the timer callback in softirq context as well which renders the tasklet useless. [o-takashi: avoid stall due to a call of hrtimer_cancel() on a callback of hrtimer] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: alsa-devel@alsa-project.org Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-35-anna-maria@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-09Merge branch 'for-linus' into for-nextTakashi Iwai1-48/+50
Back-merge to continue fixing the OSS emulation code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05ALSA: aloop: Fix racy hw constraints adjustmentTakashi Iwai1-30/+21
The aloop driver tries to update the hw constraints of the connected target on the cable of the opened PCM substream. This is done by adding the extra hw constraints rules referring to the substream runtime->hw fields, while the other substream may update the runtime hw of another side on the fly. This is, however, racy and may result in the inconsistent values when both PCM streams perform the prepare concurrently. One of the reason is that it overwrites the other's runtime->hw field; which is not only racy but also broken when it's called before the open of another side finishes. And, since the reference to runtime->hw isn't protected, the concurrent write may give the partial value update and become inconsistent. This patch is an attempt to fix and clean up: - The prepare doesn't change the runtime->hw of other side any longer, but only update the cable->hw that is referred commonly. - The extra rules refer to the loopback_pcm object instead of the runtime->hw. The actual hw is deduced from cable->hw. - The extra rules take the cable_lock to protect against the race. Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05ALSA: aloop: Fix inconsistent format due to incomplete ruleTakashi Iwai1-7/+6
The extra hw constraint rule for the formats the aloop driver introduced has a slight flaw, where it doesn't return a positive value when the mask got changed. It came from the fact that it's basically a copy&paste from snd_hw_constraint_mask64(). The original code is supposed to be a single-shot and it modifies the mask bits only once and never after, while what we need for aloop is the dynamic hw rule that limits the mask bits. This difference results in the inconsistent state, as the hw_refine doesn't apply the dependencies fully. The worse and surprisingly result is that it causes a crash in OSS emulation when multiple full-duplex reads/writes are performed concurrently (I leave why it triggers Oops to readers as a homework). For fixing this, replace a few open-codes with the standard snd_mask_*() macros. Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05ALSA: aloop: Release cable upon open error pathTakashi Iwai1-13/+25
The aloop runtime object and its assignment in the cable are left even when opening a substream fails. This doesn't mean any memory leak, but it still keeps the invalid pointer that may be referred by the another side of the cable spontaneously, which is a potential Oops cause. Clean up the cable assignment and the empty cable upon the error path properly. Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-29ALSA: drivers: make array 'names' const, reduces object code sizeColin Ian King1-1/+1
Don't populate array 'names' on the stack but instead make them static. Makes the object code smaller by 50 bytes: Before: text data bss dec hex filename 21237 9192 1120 31549 7b3d linux/sound/drivers/dummy.o After: text data bss dec hex filename 21095 9280 1120 31495 7b07 linux/sound/drivers/dummy.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai7-0/+7
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman7-0/+7
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24ALSA: drivers: Convert timers to use timer_setup()Kees Cook8-24/+19
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31ALSA: vx: Put missing KERN_CONT prefixTakashi Iwai1-2/+2
The vx driver has a debug printk code without proper KERN_ prefix. On recent kernels, KERN_CONT prefix is mandatory for continued output lines. Put it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31ALSA: opl3: Put missing KERN_CONT prefixTakashi Iwai1-2/+2
The opl3 driver has a debug printk code without proper KERN_ prefix. On recent kernels, KERN_CONT prefix is mandatory for continued output lines. Put it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-22ALSA: pcsp: Use common error handling code in snd_card_pcsp_probe()Markus Elfring1-16/+13
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-19ALSA: drivers: constify snd_pcm_ops structuresArvind Yadav2-4/+4
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/pcm.h> work with const snd_pcm_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: drivers: make snd_pcm_hardware constBhumika Goyal5-7/+7
Make these const as they are only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: drivers: mpu401: constify pnp_device_idArvind Yadav1-1/+1
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-13ALSA: mpu401: Adjust four checks for null pointersMarkus Elfring1-4/+4
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-13ALSA: mpu401: Use common error handling code in snd_mpu401_uart_new()Markus Elfring1-6/+9
Add a jump target so that a bit of exception handling can be better reused at the end of this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-13ALSA: mpu401: Delete an error message for a failed memory allocation in ↵Markus Elfring1-1/+0
snd_mpu401_uart_new() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-13ALSA: opl3: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+1
snd_opl3_new() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-06ALSA: opl4: Move inline before return typeJoe Perches1-1/+1
Make the code like the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-28ALSA: Fix forgotten dependency fix for tristate OSS sequencer kconfigTakashi Iwai1-1/+3
In the commit 3d774d5ef066 ("ALSA: seq: Allow the tristate build of OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a couple of places were forgotten, namely, opl3 and emux Makefile. These contain the line like snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o and this doesn't work any longer as expected because snd-opl3-synth can be built-in while CONFIG_SND_SEQUENCER_OSS=m. This patch fixes these places to build properly for the new kconfig dependency. In the end, we had to use ifneq() to satisfy the requirement. It's a bit ugly, but lesser evil. Fixes: 3d774d5ef066 ("ALSA: seq: Allow the tristate build of OSS emulation") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12ALSA: seq: Allow the modular sequencer registrationTakashi Iwai4-4/+6
Many drivers bind the sequencer stuff in off-load by another driver module, so that it's loaded only on demand. In the current code, this mechanism doesn't work when the driver is built-in while the sequencer is module. We check with IS_REACHABLE() and enable only when the sequencer is in the same level of build. However, this is basically a overshoot. The binder code (snd-seq-device) is an individual module from the sequencer core (snd-seq), and we just have to make the former a built-in while keeping the latter a module for allowing the scenario like the above. This patch achieves that by rewriting Kconfig slightly. Now, a driver that provides the manual sequencer device binding should select CONFIG_SND_SEQ_DEVICE in a way as select SND_SEQ_DEVICE if SND_SEQUENCER != n Note that the "!=n" is needed here to avoid the influence of the sequencer core is module while the driver is built-in. Also, since rawmidi.o may be linked with snd_seq_device.o when built-in, we have to shuffle the code to make the linker happy. (the kernel linker isn't smart enough yet to handle such a case.) That is, snd_seq_device.c is moved to sound/core from sound/core/seq, as well as Makefile. Last but not least, the patch replaces the code using IS_REACHABLE() with IS_ENABLED(), since now the condition meets always when enabled. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: seq: Reorganize kconfig and buildTakashi Iwai1-0/+13
This is a slightly intensive rewrite of Kconfig and Makefile about ALSA sequencer stuff. The first major change is that the kconfig items for the sequencer are moved to sound/core/seq/Kconfig. OK, that's easy. The substantial change is that, instead of hackish top-level module selection in Makefile, we define a Kconfig item for each sequencer module. The driver that requires such sequencer components select exclusively the kconfig items. This is more straightforward and standard way. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: seq: Allow the tristate build of OSS emulationTakashi Iwai2-3/+6
Currently OSS sequencer emulation is tied with ALSA sequencer core, both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y, the OSS sequencer emulation is also always built-in, even though the functionality can be built as an individual module. This patch changes the rule and allows users to build snd-seq-oss module while others are built-in. Essentially, it's just a few simple changes in Kconfig and Makefile. Some driver codes like opl3 need to convert from the simple ifdef to IS_ENABLED(). But that's all. You might wonder how about the dependency: right, it can be messy, but it still works. Since we rewrote the sequencer binding with the standard bus, the driver can be bound at any time on demand. So, the synthesizer driver module can be loaded individually from the OSS emulation core before/after it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: vx: vx_pcm: constify vx_pcm_playback_ops and vx_pcm_capture_ops.Arvind Yadav1-2/+2
File size before: text data bss dec hex filename 7126 240 0 7366 1cc6 sound/drivers/vx/vx_pcm.o File size After adding 'const': text data bss dec hex filename 7382 0 0 7382 1cd6 sound/drivers/vx/vx_pcm.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA : pcsp: pcsp_lib: constify snd_pcsp_playback_opsArvind Yadav1-1/+1
File size before: text data bss dec hex filename 2027 168 1 2196 894 sound/drivers/pcsp/pcsp_lib.o File size After: text data bss dec hex filename 2155 40 1 2196 894 sound/drivers/pcsp/pcsp_lib.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-02ALSA: dummy: Convert to new PCM copy opsTakashi Iwai1-6/+14
It's a dummy ops, so just replacing it. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-30ALSA: declare snd_kcontrol_new structures as constBhumika Goyal1-12/+12
Declare snd_kcontrol_new structures as const as they are only passed an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Cross compiled these files: sound/aoa/codecs/tas.c - powerpc sound/mips/{hal2.c/sgio2audio.c} - mips sound/ppc/{awacs.c/beep.c/tumbler.c} - powerpc sound/soc/sh/siu_dai.c - sh Could not find an architecture to compile sound/sh/aica.c. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-17ALSA: opl3: Kill unused set_fs()Takashi Iwai1-14/+0
snd_enter_user() and snd_leave_user() that call set_fs() are the dead code in opl3 driver. Let's rip them off. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-17ALSA: opl4: Use IS_REACHABLE()Takashi Iwai2-3/+3
Rewrite the complex ifdef condition with IS_REACHABLE(). The ifdef in opl4_local.h was without defined(MODLE) check, but this is likely the oversight. Use IS_REACHABLE() here as well. Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-11Merge tag 'hwparam-20170420' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-04-20Annotate hardware config module parameters in sound/drivers/David Howells3-6/+6
When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in sound/drivers/. Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Takashi Iwai <tiwai@suse.de> cc: Jaroslav Kysela <perex@perex.cz> cc: alsa-devel@alsa-project.org
2017-02-28ALSA: vx: remove 'out of memory' messageMihai Burduselu1-3/+1
Reported by checkpatch.pl Signed-off-by: Mihai Burduselu <michelcatalin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-12ALSA: drivers: Constify snd_rawmidi_opsTakashi Iwai5-10/+10
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi, we can constify the definitions. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-04ALSA: vx: Don't try to update capture stream before runningTakashi Iwai1-1/+1
The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-04ALSA: vx: Fix possible transfer overflowTakashi Iwai1-2/+4
The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-1/+1
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-11-12ALSA: opl3: don't opencode IS_REACHABLE()Fabian Frederick1-1/+1
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-24ALSA: dummy: Fix a use-after-free at closingTakashi Iwai1-0/+1
syzkaller fuzzer spotted a potential use-after-free case in snd-dummy driver when hrtimer is used as backend: > ================================================================== > BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr ffff88005e5b6f68 > Read of size 8 by task syz-executor/8984 > ============================================================================= > BUG kmalloc-192 (Not tainted): kasan: bad access detected > ----------------------------------------------------------------------------- > > Disabling lock debugging due to kernel taint > INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=18446705582212484632 > .... > [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464 > .... > INFO: Freed in 0xfffd8e09 age=18446705496313138713 cpu=2164287125 pid=-1 > [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481 > .... > Call Trace: > [<ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333 > [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111 > [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218 > [<ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427 > [<ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86 > [<ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903 > [< inline >] remove_hrtimer kernel/time/hrtimer.c:945 > [<ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046 > [<ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066 > [<ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417 > [<ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507 > [<ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106 > [<ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956 > [<ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974 > [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139 > [<ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784 > [<ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805 > [<ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976 > [<ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020 > [<ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693 > [<ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483 > ..... A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which is called certainly before other blocking ops. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-4/+5
Merge second patch-bomb from Andrew Morton: - a couple of hotfixes - the rest of MM - a new timer slack control in procfs - a couple of procfs fixes - a few misc things - some printk tweaks - lib/ updates, notably to radix-tree. - add my and Nick Piggin's old userspace radix-tree test harness to tools/testing/radix-tree/. Matthew said it was a godsend during the radix-tree work he did. - a few code-size improvements, switching to __always_inline where gcc screwed up. - partially implement character sets in sscanf * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) sscanf: implement basic character sets lib/bug.c: use common WARN helper param: convert some "on"/"off" users to strtobool lib: add "on"/"off" support to kstrtobool lib: update single-char callers of strtobool() lib: move strtobool() to kstrtobool() include/linux/unaligned: force inlining of byteswap operations include/uapi/linux/byteorder, swab: force inlining of some byteswap operations include/asm-generic/atomic-long.h: force inlining of some atomic_long operations usb: common: convert to use match_string() helper ide: hpt366: convert to use match_string() helper ata: hpt366: convert to use match_string() helper power: ab8500: convert to use match_string() helper power: charger_manager: convert to use match_string() helper drm/edid: convert to use match_string() helper pinctrl: convert to use match_string() helper device property: convert to use match_string() helper lib/string: introduce match_string() helper radix-tree tests: add test for radix_tree_iter_next radix-tree tests: add regression3 test ...
2016-03-18sound: query dynamic DEBUG_PAGEALLOC settingJoonsoo Kim1-4/+5
We can disable debug_pagealloc processing even if the code is compiled with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. [akpm@linux-foundation.org: export _debug_pagealloc_enabled to modules] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-02ALSA: portman2x4: fix NULL pointer dereferenceSudip Mukherjee1-5/+6
While registering pardev, the irq_func was also registered. As a result when we tried to probe for the card, an interrupt was generated and in the ISR we tried to dereference private_data. But private_data is still NULL as we have not yet done portman_create(). Lets probe for the device after card is created. Fixes: e6a1b7e88046 ("ALSA: portman2x4 - use new parport device model") Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-29ALSA: mts64: fix NULL pointer dereferenceSudip Mukherjee1-5/+6
While registering pardev, the irq_func was also registered. As a result when we tried to probe for the card, an interrupt was generated and in the ISR we tried to dereference private_data. But private_data is still NULL as we have not yet done snd_mts64_create(). Lets probe for the card after mts64 is created. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: 94a573500d48 ("ALSA: mts64: use new parport device model") Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-22ALSA: mts64: use new parport device modelSudip Mukherjee1-52/+43
Modify mts64 driver to use the new parallel port device model. The advantage of using the device model is that the driver gets binded to the hardware, we get the feature of hotplug, we can bind/unbind the driver at runtime. The changes are in the way the driver gets registered with the parallel port subsystem and the temporary device to probe mts64 card is removed and mts64_probe() is used in the probe callback. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-18ALSA: portman2x4 - use new parport device modelSudip Mukherjee1-51/+42
Modify portman driver to use the new parallel port device model. The advantage of using the device model is that the device gets binded to the hardware, we get the feature of hotplug, we can bind/unbind the driver at runtime. The changes are in the way the driver gets registered with the parallel port subsystem and the temporary device to probe portman card is removed and portman_probe() is used in the probe callback. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>