| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The snd_ctl_led_sysfs_add and snd_ctl_led_sysfs_remove should contain
the refcount operations in pair. However, snd_ctl_led_sysfs_remove fails
to decrease the refcount to zero, which causes device_release never to
be invoked. This leads to memory leak to some resources, like struct
device_private. In addition, we also free some other similar memory
leaks in snd_ctl_led_init/snd_ctl_led_exit.
Fix this by replacing device_del to device_unregister
in snd_ctl_led_sysfs_remove/snd_ctl_led_init/snd_ctl_led_exit.
Note that, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device will
call kobject_release and delay the release of kobject, which will cause
use-after-free when the memory backing the kobject is freed at once.
Reported-by: syzbot+08a7d8b51ea048a74ffb@syzkaller.appspotmail.com
Fixes: a135dfb5de15 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210602034136.2762497-1-mudongliangabcd@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c,
adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3
fix activates the mute key LED.
Signed-off-by: Carlos M <carlos.marr.pz@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210531202026.35427-1-carlos.marr.pz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Previously this fix was applied only to Bullseye variant laptops,
and should be applied to Cyborg and Warlock variants.
Fixes: 45b14fe200ba ("ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210531163754.136736-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent commit to drop the HDA-specific mute-LED control,
e65bf99718b5 ("ALSA: HDA - remove the custom implementation for the
audio LED trigger"), caused a regression on the mixer element read for
"Capture Switch" when it's built from bind controls. The function
create_bind_cap_vol_ctl() creates the snd_kcontrol_new object directly
via snd_hda_gen_add_kctl() instead of add_control(). Although the
commit above added a workaround for the SNDRV_CTL_ACCESS_READWRITE in
add_control() as default, this code path fell out from the radar. As
a result, now the driver gives -EPERM error because of the lack of the
proper access bit at reading "Capture Switch" element value.
Fix the regression by setting the access bit properly.
Fixes: e65bf99718b5 ("ALSA: HDA - remove the custom implementation for the audio LED trigger")
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1186634
Link: https://lore.kernel.org/r/20210531180633.27831-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add HD Audio PCI ID for Intel AlderLake-M. Add rules to
snd_intel_dsp_find_config() to choose SOF driver for ADL-M systems with
PCH-DMIC or Soundwire codecs, and legacy driver for the rest.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210528185123.48332-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP ZBook Studio 17.3 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-4-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP ZBook Fury 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-3-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP ZBook Studio 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-2-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs
ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the
fixup, the mute/micmute LEDs work good.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo ThinkStation P340 uses ALC623 codec (SSID 17aa:1048) and it produces
bug plock/pop noise over line out (green jack on the back) which can be
fixed by applying ALC269_FIXUP_NO_SHUTUP tot he machine.
Convert the existing entry for the same SSID to chain to apply this fixup
as well.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210524203726.2278-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.13
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
|
|
sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?
Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Lenovo Yoga 9i has bass speaker, but the bass speaker can't work,
that is because there is an i2s amplifier on that speaker, need to
run ideapad_s740_coef() to initialize the amplifier.
And also needs to apply ALC285_FIXUP_THINKPAD_HEADSET_JACK to rename
the speaker's mixer control name, otherwise the PA can't handle them.
BugLink: http://bugs.launchpad.net/bugs/1926165
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210522042645.14221-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On some ASUS and MSI machines, the audio codec is alc1220 and the
Headphone is connected to audio mixer 0xf and DAC 0x5, in theory
the Headphone volume is controlled by DAC 0x5 (Heapdhone Playback
Volume), but somehow it is controlled by DAC 0x2 (Front Playback
Volume), maybe this is a defect on the codec alc1220.
Because of this issue, the PA couldn't switch the headphone and
Lineout correctly, If we apply the quirk CLEVO_P950 to those machines,
the Lineout and Headphone will share the audio mixer 0xc and DAC 0x2,
and generate Headphone+LO mixer, then PA could handle them when
switching between them.
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1206
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210522034741.13415-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add separate init function to call the existing controls_create
function so a custom error can be displayed if initialisation fails.
Use info level instead of error for notifications.
Display the VID/PID so device_setup is targeted to the right device.
Display "enabled" message to easily confirm that the driver is loaded.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b5d140c65f640faf2427e085fbbc0297b32e5fce.1621584566.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use usb_rcvctrlpipe() not usb_sndctrlpipe() for USB control input in
the Scarlett Gen 2 mixer driver. This fixes the device hang during
initialisation when used with the ehci-pci host driver.
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/66a3d05dac325d5b53e4930578e143cef1f50dbe.1621584566.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe().
Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This driver spits out a warning for me at boot:
sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2
but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac8230c1 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point. This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.
This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race. Also this reduces slightly more lines, so it's a win-win
change.
Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
BE hw_params op was recently added for SSP type DAIs.
But sending the DAI_CONFIG IPC during hw_params
is not supported with older firmware. So add an ABI check
to avoid sending the IPC if the firmware ABI is older than
3.18.
Fixes: e12be9fbfb91 ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs')
Tested-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210518174121.151601-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kconfig produces a warning with SND_SOC_FSL_RPMSG=y and SND_IMX_SOC=m:
WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m] && RPMSG [=y]
Selected by [y]:
- SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && SND_IMX_SOC [=m]!=n
Add a dependency to prevent this configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210514213118.630427-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sampling transfer frequency
At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Cc: <stable@vger.kernel.org>
Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Avid M-Box 3 Pro
ALSA dice driver detects jumbo payload at high sampling transfer frequency
for below models:
* Avid M-Box 3 Pro
* M-Audio Profire 610
* M-Audio Profire 2626
Although many DICE-based devices have a quirk at high sampling transfer
frequency to multiplex double number of PCM frames into data block than
the number in IEC 61883-1/6, the above devices are just compliant to
IEC 61883-1/6.
This commit disables the mode of double_pcm_frames for the models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream. This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.
For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix "use as headset mic, without its own jack detect" problen.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The snd_firewire_lib:amdtp_packet tracepoints event includes index of
packet processed in a context handling. However in IR context, it is not
calculated as expected.
Cc: <stable@vger.kernel.org>
Fixes: 753e717986c2 ("ALSA: firewire-lib: use packet descriptor for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.
Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The check for size of isochronous packet payload just cares of the size of
IR context payload without the size of CIP header.
Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.
This commit fixes entries in Kconfig and comment in ALSA OXFW driver.
Cc: <stable@vger.kernel.org>
Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
This commit fixes hardcoded stream formats.
Cc: <stable@vger.kernel.org>
Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fixup a needlessly initialised variable and an unchecked return
value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 283160f1419d ("ASoC: cs35l32: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 8cb9b001635c ("ASoC: cs35l34: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 26495252fe0d ("ASoC: cs42l73: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which
uses regmap_bulk_read but might also show up in the cache sync
sometimes. Add the missing flags to the regmap_config.
Fixes: 4fc81bc88ad9 ("ASoC: cs53l30: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark, Guillaume
I'm so sorry to bother you again and again.
These are v2 of simple-card / audio-graph re-cleanup.
KernelCI had reported that below patches broke kontron-sl28-var3-ads2
sound card probing.
434392271afcff350fe "ASoC: simple-card: add simple_link_init()"
59c35c44a9cf89a83a9 "ASoC: simple-card: add simple_parse_node()"
Main issue I'm understanding is name create timing.
We want to create dailink->name via dlc->dai_name.
But in CPU case, this dai_name might be removed by asoc_simple_canonicalize_cpu()
if it CPU was single DAI.
Thus, we need to
A) get dlc->dai_name
B) create dailink->name via dlc->dai_name
C) call asoc_simple_canonicalize_cpu()
Above reverted patch did A->C->B.
My previous v1 patch did B->A->C.
I'm so sorry that I didn't deep test on v1.
I hope v2 patches has no issues on kontron-sl28-var3-ads2.
Link: https://lore.kernel.org/r/87cztzcq56.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h7k0i437.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/20210423175318.13990-1-broonie@kernel.org
Link: https://lore.kernel.org/r/3ca62063-41b4-c25b-a7bc-8a8160e7b684@collabora.com
Kuninori Morimoto (4):
ASoC: simple-card: add simple_parse_node()
ASoC: simple-card: add simple_link_init()
ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()
ASoC: audio-graph: tidyup graph_parse_node()
sound/soc/generic/audio-graph-card.c | 57 ++++-----
sound/soc/generic/simple-card.c | 168 +++++++++++++--------------
2 files changed, 112 insertions(+), 113 deletions(-)
--
2.25.1
|
|
cs42l42 does not support standard burst transfers so the use_single_read
and use_single_write flags must be set in the regmap config.
Because of this bug, the patch:
commit 0a0eb567e1d4 ("ASoC: cs42l42: Minor error paths fixups")
broke cs42l42 probe() because without the use_single_* flags it causes
regmap to issue a burst read.
However, the missing use_single_* could cause problems anyway because the
regmap cache can attempt burst transfers if these flags are not set.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph is using cpus->dai_name / codecs->dai_name for
dailink->name.
In graph_parse_node(), xxx->dai_name is got by
snd_soc_get_dai_name(), but it might be removed soon by
asoc_simple_canonicalize_cpu().
The order should be
*1) call snd_soc_get_dai_name()
2) create dailink name
*3) call asoc_simple_canonicalize_cpu()
* are implemented in graph_parse_node().
This patch remove 3) from graph_parse_node()
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 8859f809c7d5813 ("ASoC: audio-graph: add graph_parse_node()")
Fixes: e51237b8d305225 ("ASoC: audio-graph: add graph_link_init()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87cztyawzr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use local variable at local area only.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87eeeeax16.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog
mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically
apply these settings on Lenovo Miix 3-830 tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Original commit 434392271afcff350fe ("ASoC: simple-card: add
simple_link_init()") are rejected, and this is remake version of it.
This patch adds simple_link_init() and share dai_link setting code.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 25c4a9b614f101bb9f3 ("ASoC: simple-card: Fix breakage on kontron-sl28-var3-ads2")
Fixes: 434392271afcff350fe ("ASoC: simple-card: add simple_link_init()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87fsyuax1g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Original commit 59c35c44a9cf89a83a9 ("ASoC: simple-card: add
simple_parse_node()") was reverted, and this is remake version.
Parse dai/tdm/clk are common for both CPU/Codec node.
This patch creates simple_parse_node() for it and share the code.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 25c4a9b614f101bb9f3 ("ASoC: simple-card: Fix breakage on kontron-sl28-var3-ads2")
Fixes: 59c35c44a9cf89a83a9 ("ASoC: simple-card: add simple_parse_node()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87h7jaax2k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixup to enable all 4 speaker on HP Spectre x360 15-df0xxx and probably
on similar models.
0x14 pin config override is required to enable all speakers and
alc285-speaker2-to-dac1 fixup to enable volume adjustment.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=189331
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210511124651.4802-1-eliadevito@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recently introduced MIDI endpoint parser code has an access to the
field without the size validation, hence it might lead to
out-of-bounce access. Add the sanity checks for the descriptor
sizes.
Fixes: eb596e0fd13c ("ALSA: usb-audio: generate midi streaming substream names from jack names")
Link: https://lore.kernel.org/r/20210511090500.2637-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed. This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.
Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Correct the dai name for ak5552. The name should be "ak5552-aif".
Fixes: d8c5c82e4e5b ("ASoC: ak5558: Add support for ak5552")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1620470807-12056-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210508031512.53783-1-cuibixuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
