summaryrefslogtreecommitdiff
path: root/tools/build
AgeCommit message (Collapse)AuthorFilesLines
2019-08-12tools build: Add capability-related feature detectionIgor Lubashev3-0/+26
Add utilities to help checking capabilities of the running procss. Make perf link with libcap, if it is available. If no libcap-dev[el], assume no capabilities. Committer testing: $ make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: <SNIP> ... libbfd: [ on ] ... libcap: [ OFF ] ... libelf: [ on ] <SNIP> Makefile.config:833: No libcap found, disables capability support, please install libcap-devel/libcap-dev <SNIP> $ grep libcap /tmp/build/perf/FEATURE-DUMP feature-libcap=0 $ cat /tmp/build/perf/feature/test-libcap.make.output test-libcap.c:2:10: fatal error: sys/capability.h: No such file or directory 2 | #include <sys/capability.h> | ^~~~~~~~~~~~~~~~~~ compilation terminated. $ Now install libcap-devel and try again: $ make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h' diff -u tools/include/linux/bits.h include/linux/bits.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Auto-detecting system features: <SNIP> ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] <SNIP>> CC /tmp/build/perf/jvmti/libjvmti.o <SNIP>> $ grep libcap /tmp/build/perf/FEATURE-DUMP feature-libcap=1 $ cat /tmp/build/perf/feature/test-libcap.make.output $ ldd /tmp/build/perf/feature/test-libcap.make.bin ldd: /tmp/build/perf/feature/test-libcap.make.bin: No such file or directory $ ldd /tmp/build/perf/feature/test-libcap.bin linux-vdso.so.1 (0x00007ffc35bfe000) libcap.so.2 => /lib64/libcap.so.2 (0x00007ff9c62ff000) libc.so.6 => /lib64/libc.so.6 (0x00007ff9c6139000) /lib64/ld-linux-x86-64.so.2 (0x00007ff9c6326000) $ Signed-off-by: Igor Lubashev <ilubashe@akamai.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> [ split from a larger patch ] Link: http://lkml.kernel.org/r/8a1e76cf5c7c9796d0d4d240fbaa85305298aafa.1565188228.git.ilubashe@akamai.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-19tools build: Fix the zstd test in the test-all.c common case feature testArnaldo Carvalho de Melo1-1/+1
We were renanimg 'main' to 'main_zstd' but then using 'main_libzstd();' in the main() for test-all.c, causing this: $ cat /tmp/build/perf/feature/test-all.make.output test-all.c: In function ‘main’: test-all.c:236:2: error: implicit declaration of function ‘main_test_libzstd’; did you mean ‘main_test_zstd’? [-Werror=implicit-function-declaration] main_test_libzstd(); ^~~~~~~~~~~~~~~~~ main_test_zstd cc1: all warnings being treated as errors $ I.e. what was supposed to be the fast path feature test was _always_ failing, duh, fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Fixes: 3b1c5d965971 ("tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines") Link: https://lkml.kernel.org/n/tip-ma4abk0utroiw4mwpmvnjlru@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-18tools build: Add test to check if slang.h is in /usr/include/slang/Arnaldo Carvalho de Melo3-1/+12
A few odd old distros (rhel5, 6, yeah, lots of those out in use, in many cases we want to use upstream perf on it) have the slang header files in /usr/include/slang/, so add a test that will be performed only when test-all.c (the one with the most common sane settings) fails, either because we're in one of these odd distros with slang/slang.h or because something else failed (say libelf is not present). So for the common case nothing changes, no additional test is performed. Next step is to check in perf the result of these tests. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang") Link: https://lkml.kernel.org/n/tip-2sy7hbwkx68jr6n97qxgg0c6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-17perf tools: Don't hardcode host include path for libslangFlorian Fainelli1-1/+1
Hardcoding /usr/include/slang is fundamentally incompatible with cross compilation and will lead to the inability for a cross-compiled environment to properly detect whether slang is available or not. If /usr/include/slang is necessary that is a distribution specific knowledge that could be solved with either a standard pkg-config .pc file (which slang has) or simply overriding CFLAGS accordingly, but the default perf Makefile should be clean of all of that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: Stanislav Fomichev <sdf@google.com> Fixes: ef7b93a11904 ("perf report: Librarize the annotation code and use it in the newt browser") Link: http://lkml.kernel.org/r/20190614183949.5588-1-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-17tools build feature tests: Add missing SPDX headersArnaldo Carvalho de Melo3-0/+3
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-3h6fa866w6ao0wsbyqz9nrm8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-17tools build: Check if gettid() is available before providing helperArnaldo Carvalho de Melo4-0/+21
Laura reported that the perf build failed in fedora when we got a glibc that provides gettid(), which I reproduced using fedora rawhide with the glibc-devel-2.29.9000-26.fc31.x86_64 package. Add a feature check to avoid providing a gettid() helper in such systems. On a fedora rawhide system with this patch applied we now get: [root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=1 [root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output [root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin linux-vdso.so.1 (0x00007ffc6b1f6000) libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000) /lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000) [root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid U gettid@@GLIBC_2.30 [root@7a5f55352234 perf]# While on a fedora:29 system: [acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=0 [acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output test-gettid.c: In function ‘main’: test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration] return gettid(); ^~~~~~ getgid cc1: all warnings being treated as errors [acme@quaco perf]$ Reported-by: Laura Abbott <labbott@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD definesAlexey Budankov4-1/+24
Implement libzstd feature check, NO_LIBZSTD and LIBZSTD_DIR defines to override Zstd library sources or disable the feature from the command line: $ make -C tools/perf LIBZSTD_DIR=/path/to/zstd/sources/ clean all $ make -C tools/perf NO_LIBZSTD=1 clean all Auto detection feature status is reported just before compilation starts. If your system has some version of the zstd library preinstalled then the build system finds and uses it during the build. If you still prefer to compile with some other version of zstd library you have capability to refer the compilation to that version using LIBZSTD_DIR define. Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/9b4cd8b0-10a3-1f1e-8d6b-5922a7ca216b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-28perf cs-etm: Add missing case valueSolomon Tan1-2/+2
The following error was thrown when compiling `tools/perf` using OpenCSD v0.11.1. This patch fixes said error. CC util/intel-pt-decoder/intel-pt-log.o CC util/cs-etm-decoder/cs-etm-decoder.o util/cs-etm-decoder/cs-etm-decoder.c: In function ‘cs_etm_decoder__buffer_range’: util/cs-etm-decoder/cs-etm-decoder.c:370:2: error: enumeration value ‘OCSD_INSTR_WFI_WFE’ not handled in switch [-Werror=switch-enum] switch (elem->last_i_type) { ^~~~~~ CC util/intel-pt-decoder/intel-pt-decoder.o cc1: all warnings being treated as errors Because `OCSD_INSTR_WFI_WFE` case was added only in v0.11.0, the minimum required OpenCSD library version for this patch is no longer v0.10.0. Signed-off-by: Solomon Tan <solomonbobstoner@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190322052255.GA4809@w-OptiPlex-7050 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-20perf build: Check what binutils's 'disassembler()' signature to useSong Liu2-2/+9
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-14tools build feature sched_getcpu: Undef _GNU_SOURCE at the endArnaldo Carvalho de Melo1-0/+2
Since this feature test is included in test-all.c, the feature detection fast path compile/link phase, it can't leave any defines behind, as it can affect the tests included after it, so remove it. Reported-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lkml.kernel.org/n/tip-lg3kpd9tzypc797vb1f42u6k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-14tools build: Add test-reallocarray.c to test-all.c to fix the buildArnaldo Carvalho de Melo2-0/+7
When a test is in the FEATURE_TESTS_BASIC list in tools/build/Makefile.feature must be added to tools/build/feature/test-all.c, because the successfull compilation and linking of that test-all.bin file means that all the features listed in FEATURE_TESTS_BASIC are present in the system, so we don't have to go on feature by feature test building them. Since reallocarray() is expected to be present in modern systems, it has a place in FEATURE_TESTS_BASIC, so that we speed up the build process building just that file. For older systems, such as ubuntu:16.04 (build failure reported by Jin Yao) debian:8, and for the current flagship RHEL distro, RHEL7, the build will fail as test-all.bin (without test-reallocarray.c included) passes but reallocarray() isn't present, making the build fail with: CC /tmp/build/perf/libbpf.o MKDIR /tmp/build/perf/fs/ CC /tmp/build/perf/fs/tracing_path.o LD /tmp/build/perf/fd/libapi-in.o CC /tmp/build/perf/bpf.o libbpf.c: In function 'bpf_object__add_program': libbpf.c:367:10: error: implicit declaration of function 'reallocarray' [-Werror=implicit-function-declaration] progs = reallocarray(progs, nr_progs + 1, sizeof(progs[0])); ^ libbpf.c:367:2: error: nested extern declaration of 'reallocarray' [-Werror=nested-externs] progs = reallocarray(progs, nr_progs + 1, sizeof(progs[0])); ^ libbpf.c:367:8: error: assignment makes pointer from integer without a cast [-Werror=int-conversion] progs = reallocarray(progs, nr_progs + 1, sizeof(progs[0])); ^ libbpf.c: In function 'bpf_object__elf_collect': libbpf.c:887:10: error: assignment makes pointer from integer without a cast [-Werror=int-conversion] reloc = reallocarray(reloc, nr_reloc, ^ libbpf.c: In function 'bpf_program__reloc_text': libbpf.c:1394:12: error: assignment makes pointer from integer without a cast [-Werror=int-conversion] new_insn = reallocarray(prog->insns, new_cnt, sizeof(*insn)); ^ CC /tmp/build/perf/nlattr.o Even with: $ grep reallocarray /tmp/build/perf/FEATURE-DUMP feature-reallocarray=1 $ Which ubuntu:16.04.5 LTS doesn't have: perfbuilder@38a153a1bba8:/$ head -2 /etc/os-release NAME="Ubuntu" VERSION="16.04.5 LTS (Xenial Xerus)" perfbuilder@38a153a1bba8:/$ find /usr/include/ -name "*.h" | xargs grep -w reallocarray perfbuilder@38a153a1bba8:/$ Fix it by including it to test-all.c, which ends up forcing the individual tests to be triggered and for the build process to notice that indeed reallocarray() is not there: perfbuilder@38a153a1bba8:/$ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:178:0: test-reallocarray.c: In function 'main_test_reallocarray': test-reallocarray.c:7:11: error: implicit declaration of function 'reallocarray' [-Werror=implicit-function-declaration] return !!reallocarray(NULL, 1, 1); ^ cc1: all warnings being treated as errors perfbuilder@38a153a1bba8:/$ That is the only test that is failing on Ubuntu 16.03.5 LTS, so all tests are forced: perfbuilder@38a153a1bba8:/tmp/build/perf/feature$ ls -lSr *.make.output <SNIP successful tests> -rw-r--r--. 1 perfbuilder perfbuilder 0 Feb 14 15:00 test-dwarf.make.output -rw-r--r--. 1 perfbuilder perfbuilder 0 Feb 14 14:16 test-cplus-demangle.make.output -rw-r--r--. 1 perfbuilder perfbuilder 0 Feb 14 15:00 test-bpf.make.output -rw-r--r--. 1 perfbuilder perfbuilder 0 Feb 14 15:00 test-backtrace.make.output -rw-r--r--. 1 perfbuilder perfbuilder 104 Feb 14 15:00 test-bionic.make.output -rw-r--r--. 1 perfbuilder perfbuilder 107 Feb 14 15:00 test-libunwind-x86.make.output -rw-r--r--. 1 perfbuilder perfbuilder 115 Feb 14 15:00 test-libunwind-aarch64.make.output -rw-r--r--. 1 perfbuilder perfbuilder 122 Feb 14 15:00 test-libbabeltrace.make.output -rw-r--r--. 1 perfbuilder perfbuilder 254 Feb 14 15:00 test-reallocarray.make.output -rw-r--r--. 1 perfbuilder perfbuilder 312 Feb 14 15:00 test-all.make.output perfbuilder@38a153a1bba8:/tmp/build/perf/feature$ And that reallocarray() one shows: perfbuilder@38a153a1bba8:/tmp/build/perf/feature$ cat test-reallocarray.make.output test-reallocarray.c: In function 'main': test-reallocarray.c:7:11: error: implicit declaration of function 'reallocarray' [-Werror=implicit-function-declaration] return !!reallocarray(NULL, 1, 1); ^ cc1: all warnings being treated as errors perfbuilder@38a153a1bba8:/tmp/build/perf/feature$ Which now generates the expected result: perfbuilder@38a153a1bba8:~$ grep reallocarray /tmp/build/perf/FEATURE-DUMP feature-reallocarray=0 perfbuilder@38a153a1bba8:~$ The fallback mechanism kicks in and libbpf and perf are again buildable in systems without reallocarray(): $ cat tools/include/tools/libc_compat.h // SPDX-License-Identifier: (LGPL-2.0+ OR BSD-2-Clause) /* Copyright (C) 2018 Netronome Systems, Inc. */ #ifndef __TOOLS_LIBC_COMPAT_H #define __TOOLS_LIBC_COMPAT_H #include <stdlib.h> #include <linux/overflow.h> #ifdef COMPAT_NEED_REALLOCARRAY static inline void *reallocarray(void *ptr, size_t nmemb, size_t size) { size_t bytes; if (unlikely(check_mul_overflow(nmemb, size, &bytes))) return NULL; return realloc(ptr, bytes); } #endif #endif $ Reported-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray") Link: https://lkml.kernel.org/n/tip-aonqku8axii8rxki5g11w40b@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-14perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASICArnaldo Carvalho de Melo1-4/+4
As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-14perf coresight: Do not test for libopencsd by defaultArnaldo Carvalho de Melo2-6/+1
Since it is not yet that generally available, avoid testing for the presence of libcoresight in the fast path test-all.bin feature test. # dnf search opencsd No matches found. # dnf search OpenCSD No matches found. # cat /etc/fedora-release Fedora release 29 (Twenty Nine) # I.e. right now, in my system test-all.bin is failing all the time since Fedora29 doesn't have libopencsd available: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:174: test-libopencsd.c:2:10: fatal error: opencsd/c_api/opencsd_c_api.h: No such file or directory #include <opencsd/c_api/opencsd_c_api.h> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. See: 6ab2b762befd ("perf build: Disable libbabeltrace check by default") For the rationale, as soon as libopencsd becomes more generally packaged and available, we do the same thing we did with babeltrace, enabling it by default, as done in: 24787afbcd01 ("perf tools: Enable LIBBABELTRACE by default") For now, to explicitely ask for opencsd, make sure you have it installed and use: make -C tools/perf CORESIGHT=1 The feature test output will be there as an empty file: $ ls -la /tmp/build/perf/feature/test-libopencsd.make.output Because the binary used for the feature check was successfully built: $ ls -la /tmp/build/perf/feature/test-libopencsd.bin -rwxrwxr-x. 1 acme acme 18336 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.bin $ ldd /tmp/build/perf/feature/test-libopencsd.bin linux-vdso.so.1 (0x00007fffe18cc000) libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fb8e67f6000) libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fb8e676f000) libc.so.6 => /lib64/libc.so.6 (0x00007fb8e65a9000) libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fb8e6411000) libm.so.6 => /lib64/libm.so.6 (0x00007fb8e628d000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fb8e6272000) /lib64/ld-linux-x86-64.so.2 (0x00007fb8e6828000) $ And the resulting perf binary will be linked with it: -rw-rw-r--. 1 acme acme 0 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.make.output $ ldd ~/bin/perf | grep opencsd libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fd43097f000) libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fd4308f8000) $ To make sure this gets built before pushing things upstream I have a ubuntu:19.04-x-arm64 container that has: [root@quaco x-arm64]# grep CORESIGHT Dockerfile ENV EXTRA_MAKE_ARGS=CORESIGHT=1 [root@quaco x-arm64]# So that I always build with libopencsd before pushing things upstream. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: https://lkml.kernel.org/n/tip-20vyy39jw9jgrijesi30fgox@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-14tools feature: Undef _GNU_SOURCE at the end of feature testsArnaldo Carvalho de Melo3-0/+3
Since we get all the tests in a single .c file for a first test, tools/build/feature/test-all.c, if individual tests set that define and fail to undef it at its end, then it the test-all.c build will fail due to defining _GNU_SOURCE multiple times, getting us to the slow path, so undef it at the end in tests that define it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-w6s00jfo1xabgphzczadl59b@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-21perf build: Don't unconditionally link the libbfd feature test to -liberty ↵Stanislav Fomichev2-7/+7
and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17perf cs-etm: Support for ARM A32/T32 instruction sets in CoreSight traceRobert Walker1-0/+8
This patch adds support for generating instruction samples from trace of AArch32 programs using the A32 and T32 instruction sets. T32 has variable 2 or 4 byte instruction size, so the conversion between addresses and instruction counts requires extra information from the trace decoder, requiring version 0.10.0 of OpenCSD. A check for the OpenCSD library version has been added to the feature check for OpenCSD. Signed-off-by: Robert Walker <robert.walker@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543839526-30348-1-git-send-email-robert.walker@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17tools build feature: Check if libaio is availableAlexey Budankov4-3/+30
This will be used by 'perf record' to speed up reading the perf ring buffer. Committer testing: $ make -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] $ ls -la /tmp/build/perf/feature/test-libaio.* -rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin -rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d -rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output $ $ grep -i aio /tmp/build/perf/FEATURE-DUMP feature-libaio=1 $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-22perf jvmti: Separate jvmti cmlr checkJiri Olsa3-1/+15
The Compiled Method Load Record (cmlr) is JDK specific interface to access JVM stack info. This makes the jvmti agent code not compile under another jdk, which does not support that. Separating jvmti cmlr check into special feature check, and adding HAVE_JVMTI_CMLR macro to indicate that. Mark cmlr code in jvmti/libjvmti.c with HAVE_JVMTI_CMLR, so we can compile it on system without cmlr support. This change makes the jvmti compile with java-1.8.0-ibm package. It's without the line numbers support, but the rest works. Adding NO_JVMTI_CMLR compile variable for testing. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Gustavo Luiz Duarte <gduarte@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20181121154341.21521-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-22tools build feature: Check if eventfd() is availableArnaldo Carvalho de Melo4-0/+19
A new 'perf bench epoll' will use this, and to disable it for older systems, add a feature test for this API. This is just a simple program that if successfully compiled, means that the feature is present, at least at the library level, in a build that sets the output directory to /tmp/build/perf (using O=/tmp/build/perf), we end up with: $ ls -la /tmp/build/perf/feature/test-eventfd* -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin -rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d -rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output $ ldd /tmp/build/perf/feature/test-eventfd.bin linux-vdso.so.1 (0x00007fff3bf3f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000) /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000) $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP feature-dwarf=1 feature-dwarf_getlocations=1 feature-eventfd=1 feature-fortify-source=1 feature-sync-compare-and-swap=1 $ The main thing here is that in the end we'll have -DHAVE_EVENTFD in CFLAGS, and then the 'perf bench' entry needing that API can be selectively pruned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19tools build feature: Check if get_current_dir_name() is availableArnaldo Carvalho de Melo4-0/+20
As the namespace support code will use this, which is not available in some non _GNU_SOURCE libraries such as Android's bionic used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-0/+13
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-07-21Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller2-4/+4
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-17kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGSLaura Abbott1-1/+1
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-17kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-1/+1
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-14tools: include reallocarray feature test in FEATURE_TESTS_BASICJakub Kicinski1-0/+1
perf propagates its feature check results to libbpf. This means features for which perf probes must be a superset of libbpf's required features. perf depends on FEATURE_TESTS_BASIC for its list of features. commit 531b014e7a2f ("tools: bpf: make use of reallocarray") added reallocarray use to libbpf, make perf also perform the reallocarray feature check. Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-12tools: build: Use HOSTLDFLAGS with fixdepLaura Abbott1-1/+1
The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-12tools: build: Fixup host c flagsLaura Abbott1-1/+1
Commit 0c3b7e42616f ("tools build: Add support for host programs format") introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the variable is HOSTCFLAGS. Fix this up. Fixes: 0c3b7e42616f ("tools build: Add support for host programs format") Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-12tools build: fix # escaping in .cmd files for future MakePaul Menzel1-2/+2
In 2016 GNU Make made a backwards incompatible change to the way '#' characters were handled in Makefiles when used inside functions or macros: http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Due to this change, when attempting to run `make prepare' I get a spurious make syntax error: /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop. When inspecting `.fixdep.o.cmd' it includes two lines which use unescaped comment characters at the top: \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep) \# using basic dep data This is because `tools/build/Build.include' prints these '\#' characters: printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \ This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"). Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: stable@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-11tools: bpf: make use of reallocarrayJakub Kicinski2-0/+12
reallocarray() is a safer variant of realloc which checks for multiplication overflow in case of array allocation. Since it's not available in Glibc < 2.26 import kernel's overflow.h and add a static inline implementation when needed. Use feature detection to probe for existence of reallocarray. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-10Kbuild: fix # escaping in .cmd files for future MakeRasmus Villemoes1-2/+3
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-08perf build: Force llvm/clang test compile output to .make.outputJiri Olsa1-3/+6
So we can see the output of feature compile in following files: tools/build/feature/test-llvm.make.output tools/build/feature/test-llvm-version.make.output tools/build/feature/test-clang.make.output Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Add llvm/clang make targets to FILESJiri Olsa1-1/+4
So they can follow the OUTPUT variable setup as the rest of the features. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Add llvm/clang/cxx make tests into FEATURE_TESTS_EXTRAJiri Olsa1-1/+5
So we can see the status when we build perf, like: $ make LIBCLANGLLVM=1 VF=1 ... cxx: [ on ] ... llvm: [ on ] ... llvm-version: [ on ] ... clang: [ on ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+19
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-25perf tools: Integrating the CoreSight decoding libraryMathieu Poirier4-2/+21
The Open CoreSight Decoding Library (openCSD) is a free and open library to decode traces collected by the CoreSight hardware infrastructure. This patch adds the required mechanic to recognise the presence of the openCSD library on a system and set up miscellaneous flags to be used in the compilation of the trace decoding feature. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mike Leach <mike.leach@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: http://lkml.kernel.org/r/1516211539-5166-2-git-send-email-mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1516635644-24819-1-git-send-email-mathieu.poirier@linaro.org [ Merged missing test-libopencsd.c file, provided later by Mathieu ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools: bpftool: add -DPACKAGE when including bfd.hJiong Wang1-1/+1
bfd.h is requiring including of config.h except when PACKAGE or PACKAGE_VERSION are defined. /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif This check has been introduced since May-2012. It doesn't show up in bfd.h on some Linux distribution, probably because distributions have remove it when building the package. However, sometimes the user might just build libfd from source code then link bpftool against it. For this case, bfd.h will be original that we need to define PACKAGE or PACKAGE_VERSION. Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-30tools/bpftool: fix bpftool build with bintutils >= 2.9Roman Gushchin2-0/+19
Bpftool build is broken with binutils version 2.29 and later. The cause is commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature. Fix this by adding a new "feature" to the tools/build/features infrastructure and make it responsible for decision which disassembler() function signature to use. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05tools build feature: Check if pthread_barrier_t is availableArnaldo Carvalho de Melo4-0/+22
As 'perf bench futex wake-parallel" will use this, which is not available in older systems such as versions of the android NDK used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Yang <james.yang@arm.com Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-1i7iv54in4wj08lwo55b0pzv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman63-0/+63
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tools build tests: Don't hardcode gcc nameDavid Carrillo-Cisneros1-1/+1
Use $(CC) instead of harcoded gcc binary name. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Paul Turner <pjt@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20170827075442.108534-2-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-10Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar1-0/+2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-04bpf, s390: fix build for libbpf and selftest suiteDaniel Borkmann1-0/+2
The BPF feature test as well as libbpf is missing the __NR_bpf define for s390 and currently refuses to compile (selftest suite depends on libbpf as well). Similar issue was fixed some time ago via b0c47807d31d ("bpf: Add sparc support to tools and samples."), just do the same and add definitions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-30Merge branch 'perf/urgent' into perf/core, to pick up latest fixes and ↵Ingo Molnar1-7/+1
refresh the tree Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-19tools build: Add test for setns()Arnaldo Carvalho de Melo4-2/+19
And provide an alternative implementation to keep perf building on older distros as we're about to add initial support for namespaces. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-bqdwijunhjlvps1ardykhw1i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-06kbuild: simplify silent build (-s) detectionMasahiro Yamada1-7/+1
This allows to detect -s (--silent) option without checking GNU Make version. As commit e36aaea28972 ("kbuild: Fix silent builds with make-4") pointed out, GNU Make 4.x changed the way/order it presents the command line options into MAKEFLAGS. In Make 3.8x, 's' is always the first in a group of short options. The group may be prefixed with '-' in some cases. In Make 4.x, 's' is always the last in a group of short options. As commit e6ac89fabd03 ("kbuild: Correctly deal with make options which contain an 's'") addressed, we also need to deal with long options that contain 's', like --warn-undefined-variables. Test cases: [1] command line input: make --silent -> MAKEFLAGS for Make 3.8x: s -> MAKEFLAGS for Make 4.x : s [2] command line input: make -srR -> MAKEFLAGS for Make 3.8x: sRr -> MAKEFLAGS for Make 4.x : rRs [3] command line input: make -s -rR --warn-undefined-variables -> MAKEFLAGS for Make 3.8x: --warn-undefined-variables -sRr -> MAKEFLAGS for Make 4.x : rRs --warn-undefined-variables My idea to cater to all the cases more easily is to filter out long options (--%), then search 's' with $(findstring ...). This way will be more future-proof even if future versions of Make put 's' in the middle of the group. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+1
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ...
2017-05-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates/fixes from Ingo Molnar: "Mostly tooling updates, but also two kernel fixes: a call chain handling robustness fix and an x86 PMU driver event definition fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/callchain: Force USER_DS when invoking perf_callchain_user() tools build: Fixup sched_getcpu feature test perf tests kmod-path: Don't fail if compressed modules aren't supported perf annotate: Fix AArch64 comment char perf tools: Fix spelling mistakes perf/x86: Fix Broadwell-EP DRAM RAPL events perf config: Refactor a duplicated code for obtaining config file name perf symbols: Allow user probes on versioned symbols perf symbols: Accept symbols starting at address 0 tools lib string: Adopt prefixcmp() from perf and subcmd perf units: Move parse_tag_value() to units.[ch] perf ui gtk: Move gtk .so name to the only place where it is used perf tools: Move HAS_BOOL define to where perl headers are used perf memswap: Split the byteswap memory range wrappers from util.[ch] perf tools: Move event prototypes from util.h to event.h perf buildid: Move prototypes from util.h to build-id.h
2017-05-11bpf: Add strict alignment flag for BPF_PROG_LOAD.David S. Miller1-0/+1
Add a new field, "prog_flags", and an initial flag value BPF_F_STRICT_ALIGNMENT. When set, the verifier will enforce strict pointer alignment regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS. The verifier, in this mode, will also use a fixed value of "2" in place of NET_IP_ALIGN. This facilitates test cases that will exercise and validate this part of the verifier even when run on architectures where alignment doesn't matter. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-04tools build: Fixup sched_getcpu feature testArnaldo Carvalho de Melo1-0/+2
We have tools/build/feature/test-all.c to speed up feature testing, doing all tests at once, but then all tests in this file should normally pass. That is not the case with the sched-getcpu one, that wasn't passing when included from test-all.c because it needs to have _GNU_SOURCE defined before including sched.h, but _GNU_SOURCE is defined by a header included from another feature test included earlier in test-all.d, test-libpython.c, resulting in: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:121:0: test-sched_getcpu.c:1:0: error: "_GNU_SOURCE" redefined [-Werror] #define _GNU_SOURCE In file included from /usr/include/python2.7/pyconfig.h:6:0, from /usr/include/python2.7/Python.h:8, from test-libpython.c:1, from test-all.c:13: /usr/include/python2.7/pyconfig-64.h:1177:0: note: this is the location of the previous definition #define _GNU_SOURCE 1 cc1: all warnings being treated as errors Which would trigger testing the tests individually, when that _GNU_SOURCE redefinition would not take place, and the whole process would continue, just slower... Fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 120010cb1eea ("tools build: Add test for sched_getcpu()") Link: http://lkml.kernel.org/n/tip-3qp1it69xsc4w8gnuu1e9ayh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>