summaryrefslogtreecommitdiff
path: root/tools/iio
AgeCommit message (Collapse)AuthorFilesLines
2021-03-25iio: event_monitor: Enable events before monitoringLinus Walleij2-5/+65
After some painful sessions with a driver that register an enable/disable sysfs knob (gp2ap002) and manually going in and enabling the event before monitoring it: cd /sys/bus/iio/devices/iio\:device2/events # ls in_proximity_thresh_either_en # echo 1 > in_proximity_thresh_either_en I realized that it's better if the iio_event_monitor is smart enough to enable all events by itself and disable them after use, if passed the -a flag familiar from the iio_generic_buffer tool. Auto-enabling events depend on the hardware being able to handle all events at the same time which isn't necessarily the case, so a command line option is required for this. Cc: Bastien Nocera <hadess@hadess.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210319135301.542911-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11tools: iio: convert iio_generic_buffer to use new IIO buffer APIAlexandru Ardelean4-33/+107
This change makes use of the new IIO buffer API to read data from an IIO buffer. It doesn't read the /sys/bus/iio/devices/iio:deviceX/scan_elements dir anymore, it reads /sys/bus/iio/devices/iio:deviceX/bufferY, where all the scan_elements have been merged together with the old/classical buffer attributes. And it makes use of the new IIO_BUFFER_GET_FD_IOCTL ioctl to get an FD for the IIO buffer for which to read data from. It also does a quick sanity check to see that -EBUSY is returned if reading the chardev after the ioctl() has succeeded. This was tested with the following cases: 1. Tested buffer0 works with ioctl() 2. Tested that buffer0 can't be opened via /dev/iio:deviceX after ioctl() This check should be omitted under normal operation; it's being done here to check that the driver change is sane 3. Moved valid buffer0 to be buffer1, and tested that data comes from it Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-25-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11tools: iio: privatize globals and functions in iio_generic_buffer.c fileAlexandru Ardelean1-16/+15
Mostly a tidy-up. But also helps to understand the limits of scope of these functions and globals. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-24-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11tools: iio: make iioutils_get_type() private in iio_utilsAlexandru Ardelean2-8/+5
This is a bit of a tidy-up, but also helps with extending the iioutils_get_type() function a bit, as we don't need to use it outside of the iio_utils.c file. So, we'll need to update it only in one place. With this change, the 'unsigned' types are updated to 'unsigned int' in the iioutils_get_type() function definition. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-23-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-08-22iio: add IIO_MOD_O2 modifierMatt Ranostay1-0/+2
Add modifier IIO_MOD_O2 for O2 concentration reporting Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10tools: iio: Correctly add make dependency for iio_utilsLaura Abbott2-3/+8
iio tools fail to build correctly with make parallelization: $ make -s -j24 fixdep: error opening depfile: ./.iio_utils.o.d: No such file or directory make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:96: iio_utils.o] Error 2 make: *** [Makefile:43: iio_event_monitor-in.o] Error 2 make: *** Waiting for unfinished jobs.... This is because iio_utils.o is used across multiple targets. Fix this by making iio_utils.o a proper dependency. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-18tools: iio: add .gitignoreBartosz Golaszewski1-0/+4
The generated files must not be tracked by git. Add a local .gitignore. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-01Merge tag 'iio-for-5.3b' of ↵Greg Kroah-Hartman1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...
2019-06-27iio: iio-utils: Fix possible incorrect mask calculationBastien Nocera1-2/+2
On some machines, iio-sensor-proxy was returning all 0's for IIO sensor values. It turns out that the bits_used for this sensor is 32, which makes the mask calculation: *mask = (1 << 32) - 1; If the compiler interprets the 1 literals as 32-bit ints, it generates undefined behavior depending on compiler version and optimization level. On my system, it optimizes out the shift, so the mask value becomes *mask = (1) - 1; With a mask value of 0, iio-sensor-proxy will always return 0 for every axis. Avoid incorrect 0 values caused by compiler optimization. See original fix by Brett Dutro <brett.dutro@gmail.com> in iio-sensor-proxy: https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3 Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner5-21/+5
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11Merge 5.0-rc6 into staging-nextGreg Kroah-Hartman1-1/+1
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-12tools: iio: iio_generic_buffer: make num_loops signedMartin Kelly1-1/+1
Currently, num_loops is unsigned, but it's set by strtoll, which returns a (signed) long long int. This could lead to overflow, and it also makes the check "num_loops < 0" always be false, since num_loops is unsigned. Setting num_loops to -1 to loop forever is almost working because num_loops is getting set to a very high number, but it's technically still incorrect. Fix this issue by making num_loops signed. This also fixes an error found by Smatch. Signed-off-by: Martin Kelly <mkelly@xevo.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 55dda0abcf9d ("tools: iio: iio_generic_buffer: allow continuous looping") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16iio: Add modifiers for ethanol and H2 gasesAndreas Brauchli1-0/+4
Add ethanol and H2 gas modifiers: * IIO_MOD_ETHANOL * IIO_MOD_H2 Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16iio: add IIO_MASSCONCENTRATION channel typeTomasz Duszynski1-0/+10
Measuring particulate matter in ug / m3 (micro-grams per cubic meter) is de facto standard. Existing air quality sensors usually follow this convention and are capable of returning measurements using this unit. IIO currently does not offer suitable channel type for this type of measurements hence this patch adds this. In addition, extra modifiers are introduced used for distinguishing between fine pm1, pm2p5 and coarse pm4, pm10 particle measurements, i.e IIO_MOD_PM1, IIO_MOD_PM25 and IIO_MOD_PM4, IIO_MOD_PM10. pmX consists of particles with aerodynamic diameter less or equal to X micrometers. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-10-21tools iio: Override CFLAGS assignmentsJiri Olsa1-1/+1
So user could specify outside CFLAGS values. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-23iio: Add modifier for DUV lightMaxime Roussin-Bélanger1-0/+2
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-21iio: Add channel for PhaseMathieu Othacehe1-0/+2
Add new channel type support for phase. This channel may be used by Time-of-flight sensors to express the phase difference between emitted and received signals. Those sensor will then use the phase shift of return signals to approximate the distance to objects. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-10iio: Add channel for Position RelativeEugen Hristev1-0/+2
Add new channel type for relative position on a pad. These type of analog sensor offers the position of a pen on a touchpad, and is represented as a voltage, which can be converted to a position on X and Y axis on the pad. The channel will hand the relative position on the pad in both directions. The channel can then be consumed by a touchscreen driver or read as-is for a raw indication of the touchpen on a touchpad. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-20tools: iio: iio_generic_buffer: allow continuous loopingMartin Kelly1-5/+5
Sometimes it's useful to stream samples forever, such as when stress-testing a driver overnight to check for memory leaks or other issues. When the program receives a signal, it will gracefully cleanup, so it is still safe to terminate at any time. Add support for specifying a negative -c option, meaning that we should loop forever. To do so, we need to use a long long (instead of just long) for num_loops so that current code specifying num_loops greater than UNSIGNED_LONG_MAX doesn't break. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-20tools: iio: iio_generic_buffer: fix types to matchMartin Kelly1-1/+4
Several types are mismatched and causing implicit conversions. Fix them up so the types match. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-22tools: fix cross-compile var clobberingMartin Kelly1-2/+0
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-09iio: tools: add install sectionAndy Shevchenko1-1/+9
Allow user to call install target. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-09iio: tools: move to tools buildsystemAndy Shevchenko2-20/+51
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree. Switch iio target to be built by it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-05-07iio: tools: generic_buffer: increase trigger lengthEugen Hristev1-1/+1
Increased trigger length to 64 in order to cope with trigger names like fc030000.adc-dev0-external-rising Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27tools/iio: Use include/uapi with __EXPORTED_HEADERS__Sekhar Nori1-1/+1
Use the local uapi headers to keep in sync with "recently" added enum values like IIO_UVINDEX. Build tested using: $ make -C <kernelsrcdir> tools/iio $ make -C <kernelsrcdir>/tools iio $ make -C <kernelsrcdir>/tools/iio This follows a strategy similar to that used by tools/hv, tools/net and tools/leds among others. Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05iio: Add channel for GravitySong Hongyan1-0/+2
Add new channel types support for gravity sensor. Gravity sensor provides an application-level or physical collection that identifies a device that measures exclusively the force of Earth's gravity along any number of axes. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23tools: iio: iio_generic_buffer: drop unneeded parenthesesEva Rachel Retuya1-2/+2
Remove extra parentheses introduced in commit <73e176a tools: iio: iio_generic_buffer: add -A to force-enable all channels>. Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23tools: iio: iio_generic_buffer: rename and change type of force variableEva Rachel Retuya1-4/+5
Replace the type of 'force' flag from int to bool and at the same time rename it to 'force_autochannels' for better readability. Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23tools: iio: iio_generic_buffer: add -A to force-enable all channelsEva Rachel Retuya1-5/+12
If attribute/s is/are already enabled (by default or via scripts or manual interaction), issuing -a will fail to enable the channels thereby one has to manually disable the said attribute/s before proceeding with auto-enabling. Add a command-line option -A to force-activate all channels regardless of their current state. Suggested-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-22tools: iio: iio_generic_buffer: fix argument '?' optionMugunthan V N1-1/+1
When help ('?') option is passed to the command, the help text printed but not from '?' switch case of getopt_long() but as a invalid argument as below. Fix this by adding '?' to opt_String of getopt_long(). root@am437x-evm:~# ./iio_generic_buffer -? ./iio_generic_buffer: invalid option -- '?' Usage: generic_buffer [options]... Capture, convert and output data from IIO device buffer -a Auto-activate all available channels ... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-14Merge tag 'iio-for-4.9b' of ↵Greg Kroah-Hartman1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of iio new device support, features and cleanups for the 4.9 cycle. New device support * ad8801 dac - new driver supporting ad8801 and ad8803 DACs. * adc12138 - new driver supporting TI adc12130/adc12132 and adc12138 ADCs. * ltc2485 adc - new driver * mxc6255 - add support for the mxc6225 part name and fixup the ID check so it works. * vz89x VOC sensor - add support for the vz89te part which drops the voc_short channel and adds CRCs compared to other supported parts. New features * core - immutable triggers. These effectively grant exclusive control over a trigger. The typical usecase is a device representing an analog part (perhaps a MUX) that needs to control the sampling of a downstream ADC. - resource managed trigger registration and triggered_buffer_init. - iio_push_event now protected against case of the event interface registration not having yet occured. Only matters if an interrupt can occur during this window - might happen on shared interrupt lines. - helper to let a driver query if the trigger it is using is provided by itself (using the convention of both device and trigger having the same parent). * tools - iio-utils. Used channel modifier scaling in preference to generic scaling when both exist. * at91-adc - Add support for touchscreen switches closure time needed by some newer parts. * stx104 - support the ADC channels on this ADC/DAC board. As these are the primary feature of the board also move the driver to the iio/adc directory. * sx9500 - device tree bindings. Cleanups / Fixes * ad5755 - fix an off-by-one on devnr limit check (introduced earlier this cycle) * ad7266 - drop NULL check on devm_regulator_get_optional as it can't return NULL. * ak8974 - avoid an unused functional warning due to rework in PM core code. - remove .owner field setting as done by i2c_core. * ina2xx - clear out a left over debug field from chip global data. * hid-sensors - avoid an unused functional warning due to rework in PM core code. * maxim-thermocouple - fix non static symbol warnings. * ms5611 - fetch and enable regulators unconditionally when they aren't optional. * sca3000 - whitespace cleanup. * st_sensors - fetch and enable regulators unconditionally rather than having them supported as optional regulators (missunderstanding on my part amongst others a while back) - followup to previous patch fixes error checking on the regulators. - mark symbols static where possible. - use the 'is it my trigger' help function. This prevents the odd case of another device triggering from the st-sensors trigger whilst the st-sensors trigger is itself not using it but rather using say an hrtimer. * ti-ads1015 - add missing of_node_put. * vz89x - rework to all support of new devices. - prevent reading of a corrupted buffer. - fixup a return value of 0/1 in a bool returning function. Address updates - Vlad Dogaru email address change.
2016-09-12Merge 4.8-rc6 into staging-nextGreg Kroah-Hartman1-1/+1
We need the IIO changes in here for future patches to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman1-1/+1
We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-29tools:iio:iio_generic_buffer: fix trigger-less modeGregor Boirie1-1/+1
Passing the trigger-less mode option on the command line causes iio_generic_buffer to fail searching for an IIO trigger. Fix this by skipping trigger initialization if trigger-less mode is requested. Technically it actually fixes: 7c7e9dad70 where the bug was introduced but as the window to the patch below that changes the context was very small let's mark it with that. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Fixes: deb4d1fdcb5af ("iio: generic_buffer: Fix --trigger-num option") Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-29iio: iio-utils: use channel modifier scaling if it existsMatt Ranostay1-4/+7
Now there are channel modifiers with their own scaling those should be used when possible over the generic channel type scaling. Examples are of IIO_TEMP channel having a generic scaling value, and another having IIO_MOD_TEMP_AMBIENT modifier with another scaling value. Previously the first scaling value for a channel type would be applied to all channels of like type in iio_generic_buffer Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15tools: iio: lsiio: enumerate processed channelsMatt Ranostay1-1/+2
Enumerate the processed channels (e.g. *_input) as well the raw channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15tools: iio: iio_generic_buffer: initialize channel array pointerAlison Schofield1-1/+1
Uninitialized channel pointer causes segmentation fault when we call free(channel) during cleanup() with no channels initialized. This happens when you exit early for usage errors. Initialize the pointer to NULL when it is declared. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Tested-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-11iio: generic_buffer: Fix --trigger-num optionCrestez Dan Leonard1-2/+2
Initialize trig_num to -1 and handle trig_num=0 as a valid id. Fixes: 7c7e9dad (iio: iio_generic_buffer: Add --trigger-num option) Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: iio_generic_buffer: Add --trigger-num optionCrestez Dan Leonard1-5/+29
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: iio_generic_buffer: Add --device-num optionCrestez Dan Leonard1-18/+51
This makes it possible to distinguish between iio devices with the same name. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: iio_generic_buffer: Cleanup when receiving signalsCrestez Dan Leonard1-64/+108
This will clean (disable buffer/trigger/channels) when doing something like a CTRL-C. Otherwise restarting generic_buffer requires a manual echo 0 > buffer/enable This also cleanup up all the code freeing string buffers at the end of main. We initialize all pointers to NULL so that cleanup can all be done under a single error label. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29tools: iio: Rename generic_buffer to iio_generic_bufferDaniel Baluta2-5/+5
This makes it clear that generic_buffer is an IIO tool and also complies with filename conventions in tools/iio. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29tools: iio: Add ability to install/uninstallPeter Robinson1-0/+15
Add options to the Makefile for install/uninstall similar to other tools. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19iio: tools: generic_buffer: auto-enable channelsLinus Walleij2-4/+105
If no channels are enabled when we run generic_buffer on a device, add a command-line option to just enable all of them, run the sampling and disable them all again afterwards. This is extremely useful when I'm low-level testing my sensors with interrupts and triggers, sample session: root@Ux500:/ lsiio Device 000: lsm303dlh_accel Device 001: lis331dl_accel Device 002: l3g4200d Device 003: lsm303dlh_magn Device 004: lps001wp Trigger 000: lsm303dlh_accel-trigger Trigger 001: lis331dl_accel-trigger Trigger 002: l3g4200d-trigger root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d iio device number being used is 2 iio trigger number being used is 2 No channels are enabled, enabling all channels Enabling: in_anglvel_x_en Enabling: in_anglvel_y_en Enabling: in_anglvel_z_en Enabling: in_timestamp_en /sys/bus/iio/devices/iio:device2 l3g4200d-trigger -3.593664 -0.713133 4.870143 946684863662292480 3.225546 0.867357 -4.945878 946684863671875000 -0.676413 0.127296 0.106641 946684863681488037 -0.661113 0.110160 0.128826 946684863690673828 -0.664173 0.113067 0.123471 946684863700683593 -0.664938 0.109395 0.124848 946684863710144042 -0.664173 0.110619 0.130203 946684863719512939 -0.666162 0.111231 0.132651 946684863729125976 -0.668610 0.111690 0.130662 946684863738739013 -0.660501 0.110466 0.131733 946684863748565673 Disabling: in_anglvel_x_en Disabling: in_anglvel_y_en Disabling: in_anglvel_z_en Disabling: in_timestamp_en Pure awesomeness. If some channels have been enabled through scripts or manual interaction, nothing happens. Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03iio: Add channel for UV indexPeter Meerwald-Stadler1-0/+2
UV index indicating strength of sunburn-producing ultraviolet (UV) radiation Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03iio: Add modifier for UV lightPeter Meerwald-Stadler1-0/+2
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03iio: tools: make generic_buffer look for "-trigger"Linus Walleij1-1/+13
All the ST Sensors use the old "<foo>-trigger" rather than the standard "<foo>-devN" new standard suffix for triggers. Now much to do about it since it is ABI, but make the testing tools recognize it too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-20tools: iio: Update iio_event_monitor namesPeter Meerwald-Stadler1-0/+14
add recently added channel types and modifiers Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>