| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
|
|
Make sure execve() returns the expected errno values for non-regular
files.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: http://lkml.kernel.org/r/20200813231723.2725102-3-keescook@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Port sh to use the new SECCOMP_FILTER code.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
|
|
Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
|
|
Patch series "kmod/umh: a few fixes".
Tiezhu Yang had sent out a patch set with a slew of kmod selftest fixes,
and one patch which modified kmod to return 254 when a module was not
found. This opened up pandora's box about why that was being used for and
low and behold its because when UMH_WAIT_PROC is used we call a
kernel_wait4() call but have never unwrapped the error code. The commit
log for that fix details the rationale for the approach taken. I'd
appreciate some review on that, in particular nfs folks as it seems a case
was never really hit before.
This patch (of 5):
Use the variable NAME instead of "\000" directly in kmod_test_0001().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Sergey Kvachonok <ravenexp@gmail.com>
Cc: Tony Vroon <chainsaw@gentoo.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/r/20200610154923.27510-1-mcgrof@kernel.org
Link: http://lkml.kernel.org/r/20200610154923.27510-2-mcgrof@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a migrate_vma_*() self test for mmap(MAP_SHARED) to verify that
!vma_anonymous() ranges won't be migrated.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: "Bharata B Rao" <bharata@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200710194840.7602-3-rcampbell@nvidia.com
Link: http://lkml.kernel.org/r/20200709165711.26584-3-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a simple test to check the percpu memory accounting. The test creates
a cgroup tree with 1000 child cgroups and checks values of memory.current
and memory.stat::percpu.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200608230819.832349-6-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Have config-bisect save the good/bad configs at each step.
- Show log file location even on success
- Add PRE_TEST_DIE to kill test if the PRE_TEST fails
- Add a NOT operator for conditionals in config file
- Add the log output of the last test when emailing on failure.
- Other minor clean ups and small fixes.
* tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix spelling mistake "Cant" -> "Can't"
ktest.pl: Change the logic to control the size of the log file emailed
ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed
ktest.pl: Add the log of last test in email on failure
ktest.pl: Turn off buffering to the log file
ktest.pl: Just open up the log file once
ktest.pl: Add a NOT operator
ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails
ktest.pl: Always show log file location if defined even on success
ktest.pl: Have config-bisect save each config used in the bisect
|
|
There is a spelling mistake in an error message. Fix it.
Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the log file for a given test is larger than the max size given then use
set the seek from the end of the log file instead of from the start of the
test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-08-08
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 2 day(s) which contain
a total of 24 files changed, 216 insertions(+), 135 deletions(-).
The main changes are:
1) Fix UAPI for BPF map iterator before it gets frozen to allow for more
extensions/customization in future, from Yonghong Song.
2) Fix selftests build to undo verbose build output, from Andrii Nakryiko.
3) Fix inlining compilation error on bpf_do_trace_printk() due to variable
argument lists, from Stanislav Fomichev.
4) Fix an uninitialized pointer warning at btf__parse_raw() in libbpf,
from Daniel T. Lee.
5) Fix several compilation warnings in selftests with regards to ignoring
return value, from Jianlin Lv.
6) Fix interruptions by switching off timeout for BPF tests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During diag self-tests we introduce long wait in the mptcp test
program to give the script enough time to access the sockets
dump.
Such wait is introduced after shutting down one sockets end. Since
commit 43b54c6ee382 ("mptcp: Use full MPTCP-level disconnect state
machine") if both sides shutdown the socket is correctly transitioned
into CLOSED status.
As a side effect some sockets are not dumped via the diag interface,
because the socket state (CLOSED) does not match the default filter, and
this cause self-tests instability.
Address the issue moving the above mentioned wait before shutting
down the socket.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/68
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Tested-and-acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
the MPTCP selftests relies on the MPTCP diag interface which is
enabled by a specific kconfig knob: be sure to include it.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull sysfs module section fix from Kees Cook:
"Fix sysfs module section output overflow.
About a month after my kallsyms_show_value() refactoring landed, 0day
noticed that there was a path through the kernfs binattr read handlers
that did not have PAGE_SIZEd buffers, and the module "sections" read
handler made a bad assumption about this, resulting in it stomping on
memory when reached through small-sized splice() calls.
I've added a set of tests to find these kinds of regressions more
quickly in the future as well"
Sefltests-acked-by: Shuah Khan <skhan@linuxfoundation.org>
* tag 'kallsyms_show_value-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: splice: Check behavior of full and short splices
module: Correctly truncate sysfs sections output
|
|
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
|
|
Add a test suite for the mincore() syscall. It tests most of its use
cases as well as its interface.
Tests implemented:
- basic interface test
- behavior on anonymous mappings
- behavior on anonymous mappings with huge tlb pages
- file-backed mapping with a regular file
- file-backed mapping with a tmpfs file
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200728100450.4065-1-ricardo.canuelo@collabora.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add some tests to cover the kernel memory accounting functionality. These
are covering some issues (and changes) we had recently.
1) A test which allocates a lot of negative dentries, checks memcg slab
statistics, creates memory pressure by setting memory.max to some low
value and checks that some number of slabs was reclaimed.
2) A test which covers side effects of memcg destruction: it creates
and destroys a large number of sub-cgroups, each containing a
multi-threaded workload which allocates and releases some kernel
memory. Then it checks that the charge ans memory.stats do add up on
the parent level.
3) A test which reads /proc/kpagecgroup and implicitly checks that it
doesn't crash the system.
4) A test which spawns a large number of threads and checks that the
kernel stacks accounting works as expected.
5) A test which checks that living charged slab objects are not
preventing the memory cgroup from being released after being deleted by
a user.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-19-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pointer dereference
Haven't reproduced this issue. This PR is does a minor code cleanup.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Chris Down <chris@chrisdown.name>
Link: http://lkml.kernel.org/r/20200726013808.22242-1-gaurav1086@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200726120752.16768-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order to help catch regressions in splice vs read behavior in certain
special files, test a few with various different kinds of internal
kernel helpers.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
|
|
99aacebecb75 ("selftests: do not use .ONESHELL") removed .ONESHELL, which
changes how Makefile "silences" multi-command target recipes. selftests/bpf's
Makefile relied (a somewhat unknowingly) on .ONESHELL behavior of silencing
all commands within the recipe if the first command contains @ symbol.
Removing .ONESHELL exposed this hack.
This patch fixes the issue by explicitly silencing each command with $(Q).
Also explicitly define fallback rule for building *.o from *.c, instead of
relying on non-silent inherited rule. This was causing a non-silent output for
bench.o object file.
Fixes: 92f7440ecc93 ("selftests/bpf: More succinct Makefile output")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200807033058.848677-1-andriin@fb.com
|
|
Clang compiler version: 12.0.0
The following warning appears during the selftests/bpf compilation:
prog_tests/send_signal.c:51:3: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
51 | write(pipe_c2p[1], buf, 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
prog_tests/send_signal.c:54:3: warning: ignoring return value of ‘read’,
declared with attribute warn_unused_result [-Wunused-result]
54 | read(pipe_p2c[0], buf, 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
......
prog_tests/stacktrace_build_id_nmi.c:13:2: warning: ignoring return value
of ‘fscanf’,declared with attribute warn_unused_result [-Wunused-resul]
13 | fscanf(f, "%llu", &sample_freq);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test_tcpnotify_user.c:133:2: warning:ignoring return value of ‘system’,
declared with attribute warn_unused_result [-Wunused-result]
133 | system(test_script);
| ^~~~~~~~~~~~~~~~~~~
test_tcpnotify_user.c:138:2: warning:ignoring return value of ‘system’,
declared with attribute warn_unused_result [-Wunused-result]
138 | system(test_script);
| ^~~~~~~~~~~~~~~~~~~
test_tcpnotify_user.c:143:2: warning:ignoring return value of ‘system’,
declared with attribute warn_unused_result [-Wunused-result]
143 | system(test_script);
| ^~~~~~~~~~~~~~~~~~~
Add code that fix compilation warning about ignoring return value and
handles any errors; Check return value of library`s API make the code
more secure.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200806104224.95306-1-Jianlin.Lv@arm.com
|
|
Several bpf tests are interrupted by the default timeout of 45 seconds added
by commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test"). In my case it was test_progs, test_tunnel.sh,
test_lwt_ip_encap.sh and test_xdping.sh.
There's not much value in having a timeout for bpf tests, switch it off.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/7a9198ed10917f4ecab4a3dd74bcda1200791efd.1596739059.git.jbenc@redhat.com
|
|
Previous commit adjusted kernel uapi for map
element bpf iterator. This patch adjusted libbpf API
due to uapi change. bpftool and bpf_iter selftests
are also changed accordingly.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055058.1457623-1-yhs@fb.com
|
|
runqslower's Makefile is building/installing bpftool into
$(OUTPUT)/sbin/bpftool, which coincides with $(DEFAULT_BPFTOOL). In practice
this means that often when building selftests from scratch (after `make
clean`), selftests are racing with runqslower to simultaneously build bpftool
and one of the two processes fail due to file being busy. Prevent this race by
explicitly order-depending on $(BPFTOOL_DEFAULT).
Fixes: a2c9652f751e ("selftests: Refactor build to remove tools/lib/bpf from include path")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805004757.2960750-1-andriin@fb.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
"Improvements and cleanups of livepatching selftests"
* tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: adopt to newer sysctl error format
selftests/livepatch: Use "comm" instead of "diff" for dmesg
selftests/livepatch: add test delimiter to dmesg
selftests/livepatch: refine dmesg 'taints' in dmesg comparison
selftests/livepatch: Don't clear dmesg when running tests
selftests/livepatch: fix mem leaks in test-klp-shadow-vars
selftests/livepatch: more verification in test-klp-shadow-vars
selftests/livepatch: rework test-klp-shadow-vars
selftests/livepatch: simplify test-klp-callbacks busy target tests
|
|
Pull arch/csky updates from Guo Ren:
"New features:
- seccomp-filter
- err-injection
- top-down&random mmap-layout
- irq_work
- show_ipi
- context-tracking
Fixes & Optimizations:
- kprobe_on_ftrace
- optimize panic print"
* tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux:
csky: Add context tracking support
csky: Add arch_show_interrupts for IPI interrupts
csky: Add irq_work support
csky: Fixup warning by EXPORT_SYMBOL(kmap)
csky: Set CONFIG_NR_CPU 4 as default
csky: Use top-down mmap layout
csky: Optimize the trap processing flow
csky: Add support for function error injection
csky: Fixup kprobes handler couldn't change pc
csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE
csky: Add cpu feature register hint for smp
csky: Add SECCOMP_FILTER supported
csky: remove unusued thread_saved_pc and *_segments functions/macros
|
|
Pull Xtensa updates from Max Filippov:
- add syscall audit support
- add seccomp filter support
- clean up make rules under arch/xtensa/boot
- fix state management for exclusive access opcodes
- fix build with PMU enabled
* tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: add missing exclusive access state management
xtensa: fix xtensa_pmu_setup prototype
xtensa: add boot subdirectories build artifacts to 'targets'
xtensa: add uImage and xipImage to targets
xtensa: move vmlinux.bin[.gz] to boot subdirectory
xtensa: initialize_mmu.h: fix a duplicated word
selftests/seccomp: add xtensa support
xtensa: add seccomp support
xtensa: expose syscall through user_pt_regs
xtensa: add audit support
|
|
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
|
|
The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.
But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.
The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.
Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kci_test_encap() is actually composed by two different sub-tests,
kci_test_encap_vxlan() and kci_test_encap_fou()
Therefore we should check the test result of these two in
kci_test_encap() to let the script be aware of the pass / fail status.
Otherwise it will generate false-negative result like below:
$ sudo ./test.sh
PASS: policy routing
PASS: route get
PASS: preferred_lft addresses have expired
PASS: promote_secondaries complete
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
PASS: ip6gretap
PASS: erspan
PASS: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias 5b193daf-0a08-46d7-af2c-e7aadd422ded for test-dummy0
PASS: vrf
PASS: vxlan
FAIL: can't add fou port 7777, skipping test
PASS: macsec
PASS: bridge fdb get
PASS: neigh get
$ echo $?
0
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return value "ret" will be reset to 0 from the beginning of each
sub-test in rtnetlink.sh, therefore this test will always pass if the
last sub-test has passed:
$ sudo ./rtnetlink.sh
PASS: policy routing
PASS: route get
PASS: preferred_lft addresses have expired
PASS: promote_secondaries complete
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
PASS: ip6gretap
PASS: erspan
PASS: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias a39ee707-e36b-41d3-802f-63179ed4d580 for test-dummy0
PASS: vrf
PASS: vxlan
FAIL: can't add fou port 7777, skipping test
PASS: macsec
PASS: ipsec
3,7c3,7
< sa[0] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
< sa[0] key=0x31323334 35363738 39303132 33343536
< sa[1] rx ipaddr=0x00000000 00000000 00000000 c0a87b03
< sa[1] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
< sa[1] key=0x31323334 35363738 39303132 33343536
---
> sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
> sa[0] key=0x34333231 38373635 32313039 36353433
> sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
> sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
> sa[1] key=0x34333231 38373635 32313039 36353433
FAIL: ipsec_offload incorrect driver data
FAIL: ipsec_offload
PASS: bridge fdb get
PASS: neigh get
$ echo $?
0
Make "ret" become a local variable for all sub-tests.
Also, check the sub-test results in kci_test_rtnl() and return the
final result for this test.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates form Shuah Khan:
- TAP output reporting related fixes from Paolo Bonzini and Kees Cook.
These fixes make it skip reporting consistent with TAP format.
- Cleanup fixes to framework run_tests from Yauheni Kaliuta
* tag 'linux-kselftest-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
selftests/harness: Limit step counter reporting
selftests/seccomp: Check ENOSYS under tracing
selftests/seccomp: Refactor to use fixture variants
selftests/harness: Clean up kern-doc for fixtures
selftests: kmod: Add module address visibility test
Replace HTTP links with HTTPS ones: KMOD KERNEL MODULE LOADER - USERMODE HELPER
selftests: fix condition in run_tests
selftests: do not use .ONESHELL
selftests: pidfd: skip test if unshare fails with EPERM
selftests: pidfd: do not use ksft_exit_skip after ksft_set_plan
selftests/harness: Report skip reason
selftests/harness: Display signed values correctly
selftests/harness: Refactor XFAIL into SKIP
selftests/harness: Switch to TAP output
selftests: Add header documentation and helpers
selftests/binderfs: Fix harness API usage
selftests: Remove unneeded selftest API headers
selftests/clone3: Reorder reporting output
selftests: sync_test: do not use ksft_exit_skip after ksft_set_plan
selftests: sigaltstack: do not use ksft_exit_skip after ksft_set_plan
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Add a generic kunit_resource API extending it to support resources
that are passed in to kunit in addition kunit allocated resources. In
addition, KUnit resources are now refcounted to avoid passed in
resources being released while in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
* tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix improper treatment of file location
kunit: tool: fix broken default args in unit tests
kunit: capture stderr on all make subprocess calls
Documentation: kunit: Remove references to --defconfig
kunit: add support for named resources
kunit: generalize kunit_resource API beyond allocated resources
|
|
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fsgsbase from Thomas Gleixner:
"Support for FSGSBASE. Almost 5 years after the first RFC to support
it, this has been brought into a shape which is maintainable and
actually works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out
there ship rogue kernel modules enabling FSGSBASE behind the kernels
back which opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the
context switch path and enable user space to write GSBASE without
kernel interaction. This enablement requires careful handling of the
exception entries which go through the paranoid entry path as they
can no longer rely on the assumption that user GSBASE is positive (as
enforced via prctl() on non FSGSBASE enabled systemn).
All other entries (syscalls, interrupts and exceptions) can still just
utilize SWAPGS unconditionally when the entry comes from user space.
Converting these entries to use FSGSBASE has no benefit as SWAPGS is
only marginally slower than WRGSBASE and locating and retrieving the
kernel GSBASE value is not a free operation either. The real benefit
of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver"
* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/fsgsbase: Fix Xen PV support
x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
selftests/x86/fsgsbase: Add a missing memory constraint
selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
x86/entry/64: Introduce the FIND_PERCPU_BASE macro
x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
x86/process/64: Use FSBSBASE in switch_to() if available
x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
...
|
|
On distros using older glibc versions, the pkey tests encounter build
failures due to redefinition of the pkey syscall numbers.
For compatibility, commit 743f3544fffb added a wrapper for the
gettid() syscall and included syscall.h if the version of glibc used
is older than 2.30. This leads to different definitions of SYS_pkey_*
as the ones in the pkey test header set numeric constants where as the
ones from syscall.h reuse __NR_pkey_*. The compiler complains about
redefinitions since they are different.
This replaces SYS_pkey_* definitions with __NR_pkey_* such that the
definitions in both syscall.h and pkeys.h are alike. This way, if
syscall.h has to be included for compatibility reasons, builds will
still succeed.
Fixes: 743f3544fffb ("selftests/powerpc: Add wrapper for gettid")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Suggested-by: David Laight <david.laight@aculab.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4956d838bf59b0a71a2553c5ca81131ea8b49b9.1596561758.git.sandipan@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() implementation from Christian Brauner:
"This adds the close_range() syscall. It allows to efficiently close a
range of file descriptors up to all file descriptors of a calling
task.
This is coordinated with the FreeBSD folks which have copied our
version of this syscall and in the meantime have already merged it in
April 2019:
https://reviews.freebsd.org/D21627
https://svnweb.freebsd.org/base?view=revision&revision=359836
The syscall originally came up in a discussion around the new mount
API and making new file descriptor types cloexec by default. During
this discussion, Al suggested the close_range() syscall.
First, it helps to close all file descriptors of an exec()ing task.
This can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that
file descriptors are not cloexec by default. This is aggravated by the
fact that we can't just switch them over without massively regressing
userspace. For a whole class of programs having an in-kernel method of
closing all file descriptors is very helpful (e.g. demons, service
managers, programming language standard libraries, container managers
etc.).
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on
each file descriptor and other hacks. From looking at various
large(ish) userspace code bases this or similar patterns are very
common in service managers, container runtimes, and programming
language runtimes/standard libraries such as Python or Rust.
In addition, the syscall will also work for tasks that do not have
procfs mounted and on kernels that do not have procfs support compiled
in. In such situations the only way to make sure that all file
descriptors are closed is to call close() on each file descriptor up
to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.
Based on Linus' suggestion close_range() also comes with a new flag
CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
right before exec. This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part
of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
gets especially handy when we're closing all file descriptors above a
certain threshold.
Test-suite as always included"
* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLOSE_RANGE_UNSHARE tests
close_range: add CLOSE_RANGE_UNSHARE
tests: add close_range() tests
arch: wire-up close_range()
open: add close_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull checkpoint-restore updates from Christian Brauner:
"This enables unprivileged checkpoint/restore of processes.
Given that this work has been going on for quite some time the first
sentence in this summary is hopefully more exciting than the actual
final code changes required. Unprivileged checkpoint/restore has seen
a frequent increase in interest over the last two years and has thus
been one of the main topics for the combined containers &
checkpoint/restore microconference since at least 2018 (cf. [1]).
Here are just the three most frequent use-cases that were brought forward:
- The JVM developers are integrating checkpoint/restore into a Java
VM to significantly decrease the startup time.
- In high-performance computing environment a resource manager will
typically be distributing jobs where users are always running as
non-root. Long-running and "large" processes with significant
startup times are supposed to be checkpointed and restored with
CRIU.
- Container migration as a non-root user.
In all of these scenarios it is either desirable or required to run
without CAP_SYS_ADMIN. The userspace implementation of
checkpoint/restore CRIU already has the pull request for supporting
unprivileged checkpoint/restore up (cf. [2]).
To enable unprivileged checkpoint/restore a new dedicated capability
CAP_CHECKPOINT_RESTORE is introduced. This solution has last been
discussed in 2019 in a talk by Google at Linux Plumbers (cf. [1]
"Update on Task Migration at Google Using CRIU") with Adrian and
Nicolas providing the implementation now over the last months. In
essence, this allows the CRIU binary to be installed with the
CAP_CHECKPOINT_RESTORE vfs capability set thereby enabling
unprivileged users to restore processes.
To make this possible the following permissions are altered:
- Selecting a specific PID via clone3() set_tid relaxed from userns
CAP_SYS_ADMIN to CAP_CHECKPOINT_RESTORE.
- Selecting a specific PID via /proc/sys/kernel/ns_last_pid relaxed
from userns CAP_SYS_ADMIN to CAP_CHECKPOINT_RESTORE.
- Accessing /proc/pid/map_files relaxed from init userns
CAP_SYS_ADMIN to init userns CAP_CHECKPOINT_RESTORE.
- Changing /proc/self/exe from userns CAP_SYS_ADMIN to userns
CAP_CHECKPOINT_RESTORE.
Of these four changes the /proc/self/exe change deserves a few words
because the reasoning behind even restricting /proc/self/exe changes
in the first place is just full of historical quirks and tracking this
down was a questionable version of fun that I'd like to spare others.
In short, it is trivial to change /proc/self/exe as an unprivileged
user, i.e. without userns CAP_SYS_ADMIN right now. Either via ptrace()
or by simply intercepting the elf loader in userspace during exec.
Nicolas was nice enough to even provide a POC for the latter (cf. [3])
to illustrate this fact.
The original patchset which introduced PR_SET_MM_MAP had no
permissions around changing the exe link. They too argued that it is
trivial to spoof the exe link already which is true. The argument
brought up against this was that the Tomoyo LSM uses the exe link in
tomoyo_manager() to detect whether the calling process is a policy
manager. This caused changing the exe links to be guarded by userns
CAP_SYS_ADMIN.
All in all this rather seems like a "better guard it with something
rather than nothing" argument which imho doesn't qualify as a great
security policy. Again, because spoofing the exe link is possible for
the calling process so even if this were security relevant it was
broken back then and would be broken today. So technically, dropping
all permissions around changing the exe link would probably be
possible and would send a clearer message to any userspace that relies
on /proc/self/exe for security reasons that they should stop doing
this but for now we're only relaxing the exe link permissions from
userns CAP_SYS_ADMIN to userns CAP_CHECKPOINT_RESTORE.
There's a final uapi change in here. Changing the exe link used to
accidently return EINVAL when the caller lacked the necessary
permissions instead of the more correct EPERM. This pr contains a
commit fixing this. I assume that userspace won't notice or care and
if they do I will revert this commit. But since we are changing the
permissions anyway it seems like a good opportunity to try this fix.
With these changes merged unprivileged checkpoint/restore will be
possible and has already been tested by various users"
[1] LPC 2018
1. "Task Migration at Google Using CRIU"
https://www.youtube.com/watch?v=yI_1cuhoDgA&t=12095
2. "Securely Migrating Untrusted Workloads with CRIU"
https://www.youtube.com/watch?v=yI_1cuhoDgA&t=14400
LPC 2019
1. "CRIU and the PID dance"
https://www.youtube.com/watch?v=LN2CUgp8deo&list=PLVsQ_xZBEyN30ZA3Pc9MZMFzdjwyz26dO&index=9&t=2m48s
2. "Update on Task Migration at Google Using CRIU"
https://www.youtube.com/watch?v=LN2CUgp8deo&list=PLVsQ_xZBEyN30ZA3Pc9MZMFzdjwyz26dO&index=9&t=1h2m8s
[2] https://github.com/checkpoint-restore/criu/pull/1155
[3] https://github.com/nviennot/run_as_exe
* tag 'cap-checkpoint-restore-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add clone3() CAP_CHECKPOINT_RESTORE test
prctl: exe link permission error changed from -EINVAL to -EPERM
prctl: Allow local CAP_CHECKPOINT_RESTORE to change /proc/self/exe
proc: allow access in init userns for map_files with CAP_CHECKPOINT_RESTORE
pid_namespace: use checkpoint_restore_ns_capable() for ns_last_pid
pid: use checkpoint_restore_ns_capable() for set_tid
capabilities: Introduce CAP_CHECKPOINT_RESTORE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"This contains the changes to add the missing support for attaching to
time namespaces via pidfds.
Last cycle setns() was changed to support attaching to multiple
namespaces atomically. This requires all namespaces to have a point of
no return where they can't fail anymore.
Specifically, <namespace-type>_install() is allowed to perform
permission checks and install the namespace into the new struct nsset
that it has been given but it is not allowed to make visible changes
to the affected task. Once <namespace-type>_install() returns,
anything that the given namespace type additionally requires to be
setup needs to ideally be done in a function that can't fail or if it
fails the failure must be non-fatal.
For time namespaces the relevant functions that fell into this
category were timens_set_vvar_page() and vdso_join_timens(). The
latter could still fail although it didn't need to. This function is
only implemented for vdso_join_timens() in current mainline. As
discussed on-list (cf. [1]), in order to make setns() support time
namespaces when attaching to multiple namespaces at once properly we
changed vdso_join_timens() to always succeed. So vdso_join_timens()
replaces the mmap_write_lock_killable() with mmap_read_lock().
Please note that arm is about to grow vdso support for time namespaces
(possibly this merge window). We've synced on this change and arm64
also uses mmap_read_lock(), i.e. makes vdso_join_timens() a function
that can't fail. Once the changes here and the arm64 changes have
landed, vdso_join_timens() should be turned into a void function so
it's obvious to callers and implementers on other architectures that
the expectation is that it can't fail.
We didn't do this right away because it would've introduced
unnecessary merge conflicts between the two trees for no major gain.
As always, tests included"
[1]: https://lore.kernel.org/lkml/20200611110221.pgd3r5qkjrjmfqa2@wittgenstein
* tag 'threads-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLONE_NEWTIME setns tests
nsproxy: support CLONE_NEWTIME with setns()
timens: add timens_commit() helper
timens: make vdso_join_timens() always succeed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"There are a bunch of clean ups and selftest improvements along with
two major updates to the SECCOMP_RET_USER_NOTIF filter return:
EPOLLHUP support to more easily detect the death of a monitored
process, and being able to inject fds when intercepting syscalls that
expect an fd-opening side-effect (needed by both container folks and
Chrome). The latter continued the refactoring of __scm_install_fd()
started by Christoph, and in the process found and fixed a handful of
bugs in various callers.
- Improved selftest coverage, timeouts, and reporting
- Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)
- Refactor __scm_install_fd() into __receive_fd() and fix buggy
callers
- Introduce 'addfd' command for SECCOMP_RET_USER_NOTIF (Sargun
Dhillon)"
* tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD
seccomp: Introduce addfd ioctl to seccomp user notifier
fs: Expand __receive_fd() to accept existing fd
pidfd: Replace open-coded receive_fd()
fs: Add receive_fd() wrapper for __receive_fd()
fs: Move __scm_install_fd() to __receive_fd()
net/scm: Regularize compat handling of scm_detach_fds()
pidfd: Add missing sock updates for pidfd_getfd()
net/compat: Add missing sock updates for SCM_RIGHTS
selftests/seccomp: Check ENOSYS under tracing
selftests/seccomp: Refactor to use fixture variants
selftests/harness: Clean up kern-doc for fixtures
seccomp: Use -1 marker for end of mode 1 syscall list
seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID
selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall()
selftests/seccomp: Make kcmp() less required
seccomp: Use pr_fmt
selftests/seccomp: Improve calibration loop
selftests/seccomp: use 90s as timeout
selftests/seccomp: Expand benchmark to per-filter measurements
...
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Flush the cleanup xtables worker to make sure destructors
have completed, from Florian Westphal.
2) iifgroup is matching erroneously, also from Florian.
3) Add selftest for meta interface matching, from Florian Westphal.
4) Move nf_ct_offload_timeout() to header, from Roi Dayan.
5) Call nf_ct_offload_timeout() from flow_offload_add() to
make sure garbage collection does not evict offloaded flow,
from Roi Dayan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new tests check that IP and IPv6 packets exceeding the local PMTU
estimate, forwarded by an Open vSwitch instance from another node,
result in the correct route exceptions being created, and that
communication with end-to-end fragmentation, over GENEVE and VXLAN
Open vSwitch ports, is now possible as a result of PMTU discovery.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new tests check that IP and IPv6 packets exceeding the local PMTU
estimate, both locally generated and forwarded by a bridge from
another node, result in the correct route exceptions being created,
and that communication with end-to-end fragmentation over VXLAN and
GENEVE tunnels is now possible as a result of PMTU discovery.
Part of the existing setup functions aren't generic enough to simply
add a namespace and a bridge to the existing routing setup. This
rework is in progress and we can easily shrink this once more generic
topology functions are available.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
