From 0be160cf86f96dbc2d1cb74f9eef3581a2ad7971 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Thu, 23 Jul 2020 03:33:56 +0300 Subject: serial: 8250_dw: Pass the same rate to the clk round and set rate methods Indeed according to the clk API if clk_round_rate() has successfully accepted a rate, then in order setup the clock with value returned by the clk_round_rate() the clk_set_rate() method must be called with the original rate value. Suggested-by: Russell King Signed-off-by: Serge Semin Link: https://lore.kernel.org/r/20200723003357.26897-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 12866083731d..c1511f9244bb 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -275,15 +275,15 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old) { - unsigned int baud = tty_termios_baud_rate(termios); + unsigned long newrate = tty_termios_baud_rate(termios) * 16; struct dw8250_data *d = to_dw8250_data(p->private_data); long rate; int ret; clk_disable_unprepare(d->clk); - rate = clk_round_rate(d->clk, baud * 16); + rate = clk_round_rate(d->clk, newrate); if (rate > 0) { - ret = clk_set_rate(d->clk, rate); + ret = clk_set_rate(d->clk, newrate); if (!ret) p->uartclk = rate; } -- cgit v1.2.3