From 4ab88516b097ac8c23e00e7c3a26fbcd16feeefd Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Mon, 10 Dec 2018 11:14:29 +0100 Subject: arm64: dts: allwinner: a64: Fix the video engine compatible When introducing the video-codec node for the video engine, the compatible for the H5 was used instead of the compatible for the A64. Use the right compatible instead. Fixes: d60ce24740d2 ("arm64: dts: allwinner: a64: Add Video Engine node") Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 837a03dee875..2abb335145a6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -390,7 +390,7 @@ }; video-codec@1c0e000 { - compatible = "allwinner,sun50i-h5-video-engine"; + compatible = "allwinner,sun50i-a64-video-engine"; reg = <0x01c0e000 0x1000>; clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, <&ccu CLK_DRAM_VE>; -- cgit v1.2.3 From 8443e4843e1c2594bf5664e1d993a1be71d1befb Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 23 Dec 2018 20:24:13 +0200 Subject: ARM: OMAP: dts: N950/N9: fix onenand timings Commit a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT") started using DT specified timings for GPMC, and as a result the OneNAND stopped working on N950/N9 as we had wrong values in the DT. Fix by updating the values to bootloader timings that have been tested to be working on both Nokia N950 and N9. Fixes: a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT") Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n950-n9.dtsi | 42 ++++++++++++++++++++++++------------ 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 0d9b85317529..e142e6c70a59 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -370,6 +370,19 @@ compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + /* + * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported + * bootloader set values when booted with v4.19 using both N950 + * and N9 devices (OneNAND Manufacturer: Samsung): + * + * gpmc cs0 before gpmc_cs_program_settings: + * cs0 GPMC_CS_CONFIG1: 0xfd001202 + * cs0 GPMC_CS_CONFIG2: 0x00181800 + * cs0 GPMC_CS_CONFIG3: 0x00030300 + * cs0 GPMC_CS_CONFIG4: 0x18001804 + * cs0 GPMC_CS_CONFIG5: 0x03171d1d + * cs0 GPMC_CS_CONFIG6: 0x97080000 + */ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; @@ -379,26 +392,27 @@ gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <87>; - gpmc,cs-wr-off-ns = <87>; + gpmc,cs-rd-off-ns = <122>; + gpmc,cs-wr-off-ns = <122>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <10>; - gpmc,adv-wr-off-ns = <10>; - gpmc,oe-on-ns = <15>; - gpmc,oe-off-ns = <87>; + gpmc,adv-rd-off-ns = <15>; + gpmc,adv-wr-off-ns = <15>; + gpmc,oe-on-ns = <20>; + gpmc,oe-off-ns = <122>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <87>; - gpmc,rd-cycle-ns = <112>; - gpmc,wr-cycle-ns = <112>; - gpmc,access-ns = <81>; + gpmc,we-off-ns = <122>; + gpmc,rd-cycle-ns = <148>; + gpmc,wr-cycle-ns = <148>; + gpmc,access-ns = <117>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <5>; - gpmc,wr-data-mux-bus-ns = <30>; - gpmc,wr-access-ns = <81>; - gpmc,sync-clk-ps = <15000>; + gpmc,clk-activation-ns = <10>; + gpmc,wr-data-mux-bus-ns = <40>; + gpmc,wr-access-ns = <117>; + + gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */ /* * MTD partition table corresponding to Nokia's MeeGo 1.2 -- cgit v1.2.3 From ef4a55b9197a8f844ea0663138e902dcce3e2f36 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Jan 2019 09:52:43 -0800 Subject: ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags We're now getting the following error: genirq: Setting trigger mode 1 for irq 230 failed (regmap_irq_set_type+0x0/0x15c) cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524 Cc: Sebastian Reichel Reported-by: Pavel Machek Tested-by: Pavel Machek Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index ddc7a7bb33c0..f57acf8f66b9 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -105,7 +105,7 @@ interrupts-extended = < &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 - &cpcap 48 1 + &cpcap 48 0 >; interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld", -- cgit v1.2.3 From 2bb7babaae8780dd257abeb354c70cc176fd9dfa Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Jan 2019 13:42:40 -0800 Subject: ARM: dts: Remove unnecessary idle flags for omap5 uart3 Looks like I accidentally left some extra flags for uart3 to not idle it. This happened as I generated the data from a running system where these flags are set dynamically on boot by omap_hwmod_setup_earlycon_flags() if earlycon is enabled. We can just remove them. Fixes: 4c387984618f ("ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data") Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-l4.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 9c7e309d9c2c..0960348002ad 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1046,8 +1046,6 @@ , ; ti,syss-mask = <1>; - ti,no-reset-on-init; - ti,no-idle-on-init; /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>; clock-names = "fck"; -- cgit v1.2.3 From aa9ad54285c78e7f69b20b3734c0c79aa98af3c3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 8 Jan 2019 15:25:26 +0800 Subject: ARM: dts: sun6i: Add clock-output-names to osc24M clock The osc24M clock does not have a "clock-output-names" property, which means that the clock name is derived from the node name in Linux. The node name was changed in commit acfd5bbe2641 ("ARM: dts: sun6i: Change clock node names to avoid warnings"). This breaks Linux as the sunxi-ng clock driver implicitly depends on the external clock being named "osc24M". Add a "clock-output-names" property to restore the previous behavior. Fixes: acfd5bbe2641 ("ARM: dts: sun6i: Change clock node names to avoid warnings") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 353d90f99b40..13304b8c5139 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -216,6 +216,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-output-names = "osc24M"; }; osc32k: clk-32k { -- cgit v1.2.3 From cc4bddade114b696ab27c1a77cfc7040151306da Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 8 Jan 2019 20:18:40 +0100 Subject: ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2 Because "ethernet0" alias is missing, U-Boot doesn't generate board specific MAC address. Effect of this is random MAC address every boot and thus new IP address is assigned to the board. Fix this by adding alias. Fixes: 7389172fc3ed ("ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2") Signed-off-by: Jernej Skrabec [Maxime: Removed unneeded comment] Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 5d23667dc2d2..25540b7694d5 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -53,7 +53,7 @@ aliases { serial0 = &uart0; - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &sdiowifi; }; -- cgit v1.2.3 From b1360dcfdaa1d55952e5ec8dd9d99f88965d7ac9 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Wed, 9 Jan 2019 19:16:04 +0100 Subject: arm64: dts: allwinner: a64: Fix USB OTG regulator Currently, AXP803 driver assumes that reg_drivevbus is input which is wrong. Unfortunate consequence of that is that none of the USB ports work on the board, even USB HOST port, because USB PHY driver probing fails due to missing regulator. Fix that by adding "x-powers,drive-vbus-en" property to AXP803 node. Fixes: 14ff5d8f9151 ("arm64: dts: allwinner: a64: Orange Pi Win: Enable USB OTG socket") Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index b0c64f75792c..8974b5a1d3b1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -188,6 +188,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; -- cgit v1.2.3 From e35e26b26e955c53e61c154ba26b9bb15da6b858 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Fri, 7 Dec 2018 10:52:31 +0000 Subject: arm: dts: meson: Fix IRQ trigger type for macirq A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed. After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING. The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well. Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support") Signed-off-by: Carlo Caione Reviewed-by: Martin Blumenstingl Tested-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 2 +- arch/arm/boot/dts/meson8b-odroidc1.dts | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index e4645f612712..2ab74860d962 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -274,7 +274,7 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = ; + interrupts = ; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 58669abda259..a951a6632d0c 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -221,7 +221,6 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; - eee-broken-1000t; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; -- cgit v1.2.3 From 3fb348e030319f20ebbde082a449d4bf8a96f2fd Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 29 Dec 2018 13:57:09 +0100 Subject: ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on Odroid-C1. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: e03efbce6bebf5 ("ARM: dts: meson8b-odroidc1: add microSD support") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Tested-by: Anand Moon Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8b-odroidc1.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index a951a6632d0c..0f0a46ddf3ff 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -272,8 +272,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; -- cgit v1.2.3 From c8bfe65fb1fb7a43d766df1dfa379406112cba61 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 29 Dec 2018 13:57:10 +0100 Subject: ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8b-ec100.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 0872f6e3abf5..d50fc2f60fa3 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -205,8 +205,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; -- cgit v1.2.3 From 8615f5596335db0978cea593dcd0070dc5f8b116 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 29 Dec 2018 13:57:11 +0100 Subject: ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: 35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index f5853610b20b..6ac02beb5fa7 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -206,8 +206,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; -- cgit v1.2.3 From 00ccd4532c8a61e6c65ca62eb7b6da6a272c30f1 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 12 Jan 2019 09:02:51 +0800 Subject: ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 The dspi3 is used as slave controller on vf610-bk4, and the default '#address-cells = <1>;' setting in vfxxx.dtsi causes the following DTC warning. DTC arch/arm/boot/dts/vf610-bk4.dtb ../arch/arm/boot/dts/vfxxx.dtsi:550.24-563.6: Warning (spi_bus_bridge): /soc/aips-bus@40080000/spi@400ad000: incorrect #address-cells for SPI bus also defined at ../arch/arm/boot/dts/vf610-bk4.dts:107.8-119.3 arch/arm/boot/dts/vf610-bk4.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' For spi device used as slave controller, '#address-cells' should be 0. Let's overwrite the property in vf610-bk4.dts to fix the warning. Reported-by: Stephen Rothwell Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-bk4.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 689c8930dce3..b08d561d6748 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -110,11 +110,11 @@ bus-num = <3>; status = "okay"; spi-slave; + #address-cells = <0>; - slave@0 { + slave { compatible = "lwn,bk4"; spi-max-frequency = <30000000>; - reg = <0>; }; }; -- cgit v1.2.3 From 08b88e80a1f476970284235278bf27a273b94118 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 21 Dec 2018 18:12:03 +0000 Subject: ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property Most of the legacy "gpio-key,wakeup" and "enable-sdio-wakeup" boolean properties are already replaced with "wakeup-source". However few occurrences of old property has popped up again, probably from the remnants in downstream trees. Almost all of those were remove couple of years back. Replace the legacy properties with the unified "wakeup-source" property introduced in the commit 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") and commit 0dbcdc0622ea ("mmc: core: enable support for the standard "wakeup-source" property") Cc: Fabio Estevam Cc: Shawn Guo Cc: NXP Linux Team Signed-off-by: Sudeep Holla Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-pistachio.dts | 2 +- arch/arm/boot/dts/imx6sll-evk.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index 5edf858c8b86..a31b17eaf51c 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -103,7 +103,7 @@ power { label = "Power Button"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = ; }; }; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index d8163705363e..4a31a415f88e 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -309,7 +309,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <®_sd3_vmmc>; status = "okay"; }; -- cgit v1.2.3 From ba0f4560526ba19300c07ed5a3c1df7592815dc6 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sat, 29 Dec 2018 10:01:18 +0000 Subject: ARM: dts: imx6sx: correct backward compatible of gpt i.MX6SX has same GPT type as i.MX6DL, in GPT driver, it uses below TIMER_OF_DECLARE, so the backward compatible should be "fsl,imx6dl-gpt", correct it. TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt); Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 272ff6133ec1..d1375d3650fd 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -467,7 +467,7 @@ }; gpt: gpt@2098000 { - compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; + compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_GPT_BUS>, -- cgit v1.2.3 From f29200c8b1e267b109242677ae7f2146c7682d14 Mon Sep 17 00:00:00 2001 From: Loys Ollivier Date: Mon, 14 Jan 2019 15:44:21 +0100 Subject: arm64: dts: meson: Fix mmc cd-gpios polarity Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high". Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 3 +-- 14 files changed, 14 insertions(+), 28 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index e14e0ce7e89f..016641a41694 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -187,8 +187,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 8cd50b75171d..ade2ee09ae96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -305,8 +305,7 @@ max-frequency = <200000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddio_ao3v3>; vqmmc-supply = <&vddio_tf>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 4cf7f6e80c6a..25105ac96d55 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -238,8 +238,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 2e1cd5e3a246..1cc9dc68ef00 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -258,8 +258,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index ce862266b9aa..0be0f2a5d2fe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -196,8 +196,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 93a4acf2c46c..ad4d50bd9d77 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -154,8 +154,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index ec09bb5792b7..2d2db783c44c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -211,8 +211,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vcc_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index f1c410e2da2b..796baea7a0bf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -131,8 +131,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index db293440e4ca..255cede7b447 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -238,8 +238,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 6739697be1de..9cbdb85fb591 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -183,8 +183,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index a1b31013ab6e..bc811a2faf42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -137,8 +137,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 3c3a667a8df8..3f086ed7de05 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -356,8 +356,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index f7a1cffab4a8..8acfd40090d2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -147,8 +147,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 7212dc4531e4..7fa20a8ede17 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -170,8 +170,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; -- cgit v1.2.3 From c5b11ee9f1c22a8d6b5cab2099904f7adbe79a7f Mon Sep 17 00:00:00 2001 From: Guido Günther Date: Wed, 16 Jan 2019 09:41:22 +0100 Subject: dt-bindings: imx8mq: Number clocks consecutively MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a duplicate use of 232 and numbers the clocks without holes. Fixes: 1cf3817bf1f5 ("dt-bindings: Add binding for i.MX8MQ CCM") Signed-off-by: Guido Günther Reviewed-by: Lucas Stach Signed-off-by: Shawn Guo --- include/dt-bindings/clock/imx8mq-clock.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h index b53be41929be..04f7ac345984 100644 --- a/include/dt-bindings/clock/imx8mq-clock.h +++ b/include/dt-bindings/clock/imx8mq-clock.h @@ -350,7 +350,7 @@ #define IMX8MQ_CLK_VPU_G2_ROOT 241 /* SCCG PLL GATE */ -#define IMX8MQ_SYS1_PLL_OUT 232 +#define IMX8MQ_SYS1_PLL_OUT 242 #define IMX8MQ_SYS2_PLL_OUT 243 #define IMX8MQ_SYS3_PLL_OUT 244 #define IMX8MQ_DRAM_PLL_OUT 245 @@ -372,24 +372,24 @@ /* txesc clock */ #define IMX8MQ_CLK_DSI_IPG_DIV 256 -#define IMX8MQ_CLK_TMU_ROOT 265 +#define IMX8MQ_CLK_TMU_ROOT 257 /* Display root clocks */ -#define IMX8MQ_CLK_DISP_AXI_ROOT 266 -#define IMX8MQ_CLK_DISP_APB_ROOT 267 -#define IMX8MQ_CLK_DISP_RTRM_ROOT 268 +#define IMX8MQ_CLK_DISP_AXI_ROOT 258 +#define IMX8MQ_CLK_DISP_APB_ROOT 259 +#define IMX8MQ_CLK_DISP_RTRM_ROOT 260 -#define IMX8MQ_CLK_OCOTP_ROOT 269 +#define IMX8MQ_CLK_OCOTP_ROOT 261 -#define IMX8MQ_CLK_DRAM_ALT_ROOT 270 -#define IMX8MQ_CLK_DRAM_CORE 271 +#define IMX8MQ_CLK_DRAM_ALT_ROOT 262 +#define IMX8MQ_CLK_DRAM_CORE 263 -#define IMX8MQ_CLK_MU_ROOT 272 -#define IMX8MQ_VIDEO2_PLL_OUT 273 +#define IMX8MQ_CLK_MU_ROOT 264 +#define IMX8MQ_VIDEO2_PLL_OUT 265 -#define IMX8MQ_CLK_CLKO2 274 +#define IMX8MQ_CLK_CLKO2 266 -#define IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK 275 +#define IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK 267 -#define IMX8MQ_CLK_END 276 +#define IMX8MQ_CLK_END 268 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ -- cgit v1.2.3 From e3966a766865da7ced1dece663697861dd5cf103 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 11 Jan 2019 18:21:18 +0100 Subject: ARM: dts: da850: fix interrupt numbers for clocksource The timer interrupts specified in commit 3652e2741f42 ("ARM: dts: da850: Add clocks") are wrong but since the current timer code hard-codes them, the bug was never spotted. This patch must go into stable since, once we introduce a proper clocksource driver, devices with buggy device tree will stop booting. Fixes: 3652e2741f42 ("ARM: dts: da850: Add clocks") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 47aa53ba6b92..559659b399d0 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -476,7 +476,7 @@ clocksource: timer@20000 { compatible = "ti,da830-timer"; reg = <0x20000 0x1000>; - interrupts = <12>, <13>; + interrupts = <21>, <22>; interrupt-names = "tint12", "tint34"; clocks = <&pll0_auxclk>; }; -- cgit v1.2.3 From 2bb7b675248c3ad11ada0ce3d0f6d480ec8cc87b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jan 2019 14:39:13 +0100 Subject: arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 SCIF2 on RZ/G2M can be used with both DMAC1 and DMAC2. Fixes: 3a3933a4fa36430a ("arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 20745a8528c5..719ed9d9067d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1011,6 +1011,9 @@ <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; -- cgit v1.2.3 From 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jan 2019 14:39:15 +0100 Subject: arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2. Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index afedbf5728ec..0648d12778ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1262,6 +1262,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; -- cgit v1.2.3 From 05c8478abd485507c25aa565afab604af8d8fe46 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jan 2019 14:39:16 +0100 Subject: arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2. Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 6dc9b1fef830..4b3730f640ef 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1068,6 +1068,9 @@ <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; -- cgit v1.2.3 From 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Fri, 21 Dec 2018 16:41:42 +0200 Subject: soc: fsl: qbman: avoid race in clearing QMan interrupt By clearing all interrupt sources, not only those that already occurred, the existing code may acknowledge by mistake interrupts that occurred after the code checks for them. Signed-off-by: Madalin Bucur Signed-off-by: Roy Pledge Signed-off-by: Li Yang --- drivers/soc/fsl/qbman/qman.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c index 52c153cd795a..636f83f781f5 100644 --- a/drivers/soc/fsl/qbman/qman.c +++ b/drivers/soc/fsl/qbman/qman.c @@ -1143,18 +1143,19 @@ static void qm_mr_process_task(struct work_struct *work); static irqreturn_t portal_isr(int irq, void *ptr) { struct qman_portal *p = ptr; - - u32 clear = QM_DQAVAIL_MASK | p->irq_sources; u32 is = qm_in(&p->p, QM_REG_ISR) & p->irq_sources; + u32 clear = 0; if (unlikely(!is)) return IRQ_NONE; /* DQRR-handling if it's interrupt-driven */ - if (is & QM_PIRQ_DQRI) + if (is & QM_PIRQ_DQRI) { __poll_portal_fast(p, QMAN_POLL_LIMIT); + clear = QM_DQAVAIL_MASK | QM_PIRQ_DQRI; + } /* Handling of anything else that's interrupt-driven */ - clear |= __poll_portal_slow(p, is); + clear |= __poll_portal_slow(p, is) & QM_PIRQ_SLOW; qm_out(&p->p, QM_REG_ISR, clear); return IRQ_HANDLED; } -- cgit v1.2.3 From 6a6a797625b5fe855bf60c798561896e311d58ce Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 22 Jan 2019 15:25:45 +0000 Subject: ARM: dts: r8a7743: Convert to new LVDS DT bindings The internal LVDS encoder now has DT bindings separate from the DU. Port the device tree over to the new model. Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Signed-off-by: Biju Das Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7743.dtsi | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 3cc33f7ff7fe..3adc158a40bb 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1681,15 +1681,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7743"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x40000>; interrupts = , ; clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; status = "disabled"; ports { @@ -1704,6 +1701,33 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7743-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; -- cgit v1.2.3 From ba16adeb346387eb2d1ada69003588be96f098fa Mon Sep 17 00:00:00 2001 From: Peng Hao Date: Sat, 29 Dec 2018 13:10:06 +0800 Subject: ARM: pxa: ssp: unneeded to free devm_ allocated data devm_ allocated data will be automatically freed. The free of devm_ allocated data is invalid. Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions") Signed-off-by: Peng Hao [title's prefix changed] Signed-off-by: Robert Jarzmik --- arch/arm/plat-pxa/ssp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index ed36dcab80f1..f51919974183 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -190,8 +190,6 @@ static int pxa_ssp_remove(struct platform_device *pdev) if (ssp == NULL) return -ENODEV; - iounmap(ssp->mmio_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res)); @@ -201,7 +199,6 @@ static int pxa_ssp_remove(struct platform_device *pdev) list_del(&ssp->node); mutex_unlock(&ssp_lock); - kfree(ssp); return 0; } -- cgit v1.2.3 From 5b90df44fd9b415d8c5d11b92746212a63d3c47f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Jan 2019 20:01:56 +0100 Subject: ARM: dts: omap3-gta04: Fix graph_port warning We're currently getting a warning with make dtbs: arch/arm/boot/dts/omap3-gta04.dtsi:720.7-727.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c0 0/port: graph node unit address error, expected "0" Tested-by: H. Nikolaus Schaller Acked-by: Rob Herring Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-gta04.dtsi | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index e53d32691308..93b420934e8e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -714,11 +714,7 @@ vdda-supply = <&vdac>; - #address-cells = <1>; - #size-cells = <0>; - port { - reg = <0>; venc_out: endpoint { remote-endpoint = <&opa_in>; ti,channels = <1>; -- cgit v1.2.3 From ac9c908eecde3ed252cb1d67fc79b3c1346f76bc Mon Sep 17 00:00:00 2001 From: Arthur Demchenkov Date: Mon, 21 Jan 2019 06:21:09 +0300 Subject: ARM: dts: n900: fix mmc1 card detect gpio polarity Wrong polarity of card detect GPIO pin leads to the system not booting from external mmc, if the back cover of N900 is closed. When the cover is open the system boots fine. This wasn't noticed before, because of a bug, which was fixed by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO CD and WP). Kernels up to 4.19 ignored the card detect GPIO from DT. Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP") Signed-off-by: Arthur Demchenkov Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 182a53991c90..826920e6b878 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -814,7 +814,7 @@ /* For debugging, it is often good idea to remove this GPIO. It means you can remove back cover (to reboot by removing battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ + cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ }; /* most boards use vaux3, only some old versions use vmmc2 instead */ -- cgit v1.2.3 From 063c20e12f8bbbc10cabc2413606b140085beb62 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 22 Jan 2019 06:26:23 +0100 Subject: ARM: dts: am335x-shc.dts: fix wrong cd pin level cd pin on mmc1 is GPIO_ACTIVE_LOW not GPIO_ACTIVE_HIGH Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP") Signed-off-by: Heiko Schocher Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-shc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index d0fd68873689..5b250060f6dd 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -215,7 +215,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <0x4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; cd-inverted; max-frequency = <26000000>; vmmc-supply = <&vmmcsd_fixed>; -- cgit v1.2.3 From 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 10 Dec 2018 13:56:33 +0000 Subject: arm64: dts: add msm8996 compatible to gicv3 Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor. With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996. Without this patch Qualcomm DB820c board reboots on mainline. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 99b7495455a6..838e32cc14c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -404,7 +404,7 @@ }; intc: interrupt-controller@9bc0000 { - compatible = "arm,gic-v3"; + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; #redistributor-regions = <1>; -- cgit v1.2.3 From db4090920ba2d61a5827a23e441447926a02ffee Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 25 Jan 2019 20:10:15 +0000 Subject: ARM: iop32x/n2100: fix PCI IRQ mapping Booting 4.20 on a TheCUS N2100 results in a kernel oops while probing PCI, due to n2100_pci_map_irq() having been discarded during boot. Signed-off-by: Russell King Cc: stable@vger.kernel.org # 2.6.18+ Signed-off-by: Arnd Bergmann --- arch/arm/mach-iop32x/n2100.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 3b73813c6b04..23e8c93515d4 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -75,8 +75,7 @@ void __init n2100_map_io(void) /* * N2100 PCI. */ -static int __init -n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; -- cgit v1.2.3 From 46edb8d1322c1763dd04e179992f8e9996085047 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 22 Jan 2019 11:35:25 +0000 Subject: firmware: arm_scmi: provide the mandatory device release callback The device/driver model clearly mandates that bus driver that discover and allocate the device must set the release callback. This callback will be used to free the device after all references have gone away. scmi bus driver is missing the obvious callback which will result in the following warning if the device is unregistered: Device 'scmi_dev.1' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. WARNING at drivers/base/core.c:922 device_release+0x8c/0xa0 Hardware name: ARM LTD Juno Development Platform BIOS EDK II Jan 21 2019 Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : device_release+0x8c/0xa0 lr : device_release+0x8c/0xa0 Call trace: device_release+0x8c/0xa0 kobject_put+0x8c/0x208 device_unregister+0x30/0x78 scmi_device_destroy+0x28/0x50 scmi_probe+0x354/0x5b0 platform_drv_probe+0x58/0xa8 really_probe+0x2c4/0x3e8 driver_probe_device+0x12c/0x148 __device_attach_driver+0xac/0x150 bus_for_each_drv+0x78/0xd8 __device_attach+0xe0/0x168 device_initial_probe+0x24/0x30 bus_probe_device+0xa0/0xa8 deferred_probe_work_func+0x8c/0xe0 process_one_work+0x1f0/0x478 worker_thread+0x22c/0x450 kthread+0x134/0x138 ret_from_fork+0x10/0x1c ---[ end trace 420bdb7f6af50937 ]--- Fix the issue by providing scmi_device_release callback. We have everything required for device release already in scmi_device_destroy, so we just need to move freeing of the device to scmi_device_release. Fixes: 933c504424a2 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices") Signed-off-by: Sudeep Holla Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: Arnd Bergmann --- drivers/firmware/arm_scmi/bus.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c index 472c88ae1c0f..92f843eaf1e0 100644 --- a/drivers/firmware/arm_scmi/bus.c +++ b/drivers/firmware/arm_scmi/bus.c @@ -119,6 +119,11 @@ void scmi_driver_unregister(struct scmi_driver *driver) } EXPORT_SYMBOL_GPL(scmi_driver_unregister); +static void scmi_device_release(struct device *dev) +{ + kfree(to_scmi_dev(dev)); +} + struct scmi_device * scmi_device_create(struct device_node *np, struct device *parent, int protocol) { @@ -138,6 +143,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol) scmi_dev->dev.parent = parent; scmi_dev->dev.of_node = np; scmi_dev->dev.bus = &scmi_bus_type; + scmi_dev->dev.release = scmi_device_release; dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id); retval = device_register(&scmi_dev->dev); @@ -156,9 +162,8 @@ free_mem: void scmi_device_destroy(struct scmi_device *scmi_dev) { scmi_handle_put(scmi_dev->handle); - device_unregister(&scmi_dev->dev); ida_simple_remove(&scmi_bus_id, scmi_dev->id); - kfree(scmi_dev); + device_unregister(&scmi_dev->dev); } void scmi_set_handle(struct scmi_device *scmi_dev) -- cgit v1.2.3 From d0f9f16788e15d9eb40f68b047732d49658c5a3a Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Wed, 16 Jan 2019 16:49:58 +0100 Subject: ARM: tango: Improve ARCH_MULTIPLATFORM compatibility Calling platform-specific code unconditionally blows up when running an ARCH_MULTIPLATFORM kernel on a different platform. Don't do it. Reported-by: Paolo Pisati Signed-off-by: Marc Gonzalez Acked-by: Pavel Machek Cc: stable@vger.kernel.org # v4.8+ Fixes: a30eceb7a59d ("ARM: tango: add Suspend-to-RAM support") Signed-off-by: Arnd Bergmann --- arch/arm/mach-tango/pm.c | 6 ++---- arch/arm/mach-tango/pm.h | 7 +++++++ arch/arm/mach-tango/setup.c | 2 ++ 3 files changed, 11 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-tango/pm.h diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c index 028e50c6383f..a32c3b631484 100644 --- a/arch/arm/mach-tango/pm.c +++ b/arch/arm/mach-tango/pm.c @@ -3,6 +3,7 @@ #include #include #include "smc.h" +#include "pm.h" static int tango_pm_powerdown(unsigned long arg) { @@ -24,10 +25,7 @@ static const struct platform_suspend_ops tango_pm_ops = { .valid = suspend_valid_only_mem, }; -static int __init tango_pm_init(void) +void __init tango_pm_init(void) { suspend_set_ops(&tango_pm_ops); - return 0; } - -late_initcall(tango_pm_init); diff --git a/arch/arm/mach-tango/pm.h b/arch/arm/mach-tango/pm.h new file mode 100644 index 000000000000..35ea705a0ee2 --- /dev/null +++ b/arch/arm/mach-tango/pm.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifdef CONFIG_SUSPEND +void __init tango_pm_init(void); +#else +#define tango_pm_init NULL +#endif diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c index 677dd7b5efd9..824f90737b04 100644 --- a/arch/arm/mach-tango/setup.c +++ b/arch/arm/mach-tango/setup.c @@ -2,6 +2,7 @@ #include #include #include "smc.h" +#include "pm.h" static void tango_l2c_write(unsigned long val, unsigned int reg) { @@ -15,4 +16,5 @@ DT_MACHINE_START(TANGO_DT, "Sigma Tango DT") .dt_compat = tango_dt_compat, .l2c_aux_mask = ~0, .l2c_write_sec = tango_l2c_write, + .init_late = tango_pm_init, MACHINE_END -- cgit v1.2.3