From c81f195703270a330f04ae41b9890b13c101a63f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 1 May 2020 16:44:47 +0200 Subject: docs: networking: device drivers: convert intel/ipw2200.txt to ReST - add SPDX header; - adjust titles and chapters, adding proper markups; - comment out text-only TOC from html/pdf output; - use copyright symbol; - use :field: markup; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: David S. Miller --- Documentation/networking/device_drivers/index.rst | 1 + .../networking/device_drivers/intel/ipw2200.rst | 526 +++++++++++++++++++++ .../networking/device_drivers/intel/ipw2200.txt | 472 ------------------ 3 files changed, 527 insertions(+), 472 deletions(-) create mode 100644 Documentation/networking/device_drivers/intel/ipw2200.rst delete mode 100644 Documentation/networking/device_drivers/intel/ipw2200.txt (limited to 'Documentation/networking') diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index 54ed10f3d1a7..f9ce0089ec7d 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -40,6 +40,7 @@ Contents: freescale/dpaa freescale/gianfar intel/ipw2100 + intel/ipw2200 .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/intel/ipw2200.rst b/Documentation/networking/device_drivers/intel/ipw2200.rst new file mode 100644 index 000000000000..0cb42d2fd7e5 --- /dev/null +++ b/Documentation/networking/device_drivers/intel/ipw2200.rst @@ -0,0 +1,526 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +============================================== +Intel(R) PRO/Wireless 2915ABG Driver for Linux +============================================== + + +Support for: + +- Intel(R) PRO/Wireless 2200BG Network Connection +- Intel(R) PRO/Wireless 2915ABG Network Connection + +Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) +PRO/Wireless 2200BG Driver for Linux is a unified driver that works on +both hardware adapters listed above. In this document the Intel(R) +PRO/Wireless 2915ABG Driver for Linux will be used to reference the +unified driver. + +Copyright |copy| 2004-2006, Intel Corporation + +README.ipw2200 + +:Version: 1.1.2 +:Date: March 30, 2006 + + +.. Index + + 0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER + 1. Introduction + 1.1. Overview of features + 1.2. Module parameters + 1.3. Wireless Extension Private Methods + 1.4. Sysfs Helper Files + 1.5. Supported channels + 2. Ad-Hoc Networking + 3. Interacting with Wireless Tools + 3.1. iwconfig mode + 3.2. iwconfig sens + 4. About the Version Numbers + 5. Firmware installation + 6. Support + 7. License + + +0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER +================================================= + +Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! + +Intel wireless LAN adapters are engineered, manufactured, tested, and +quality checked to ensure that they meet all necessary local and +governmental regulatory agency requirements for the regions that they +are designated and/or marked to ship into. Since wireless LANs are +generally unlicensed devices that share spectrum with radars, +satellites, and other licensed and unlicensed devices, it is sometimes +necessary to dynamically detect, avoid, and limit usage to avoid +interference with these devices. In many instances Intel is required to +provide test data to prove regional and local compliance to regional and +governmental regulations before certification or approval to use the +product is granted. Intel's wireless LAN's EEPROM, firmware, and +software driver are designed to carefully control parameters that affect +radio operation and to ensure electromagnetic compliance (EMC). These +parameters include, without limitation, RF power, spectrum usage, +channel scanning, and human exposure. + +For these reasons Intel cannot permit any manipulation by third parties +of the software provided in binary format with the wireless WLAN +adapters (e.g., the EEPROM and firmware). Furthermore, if you use any +patches, utilities, or code with the Intel wireless LAN adapters that +have been manipulated by an unauthorized party (i.e., patches, +utilities, or code (including open source code modifications) which have +not been validated by Intel), (i) you will be solely responsible for +ensuring the regulatory compliance of the products, (ii) Intel will bear +no liability, under any theory of liability for any issues associated +with the modified products, including without limitation, claims under +the warranty and/or issues arising from regulatory non-compliance, and +(iii) Intel will not provide or be required to assist in providing +support to any third parties for such modified products. + +Note: Many regulatory agencies consider Wireless LAN adapters to be +modules, and accordingly, condition system-level regulatory approval +upon receipt and review of test data documenting that the antennas and +system configuration do not cause the EMC and radio operation to be +non-compliant. + +The drivers available for download from SourceForge are provided as a +part of a development project. Conformance to local regulatory +requirements is the responsibility of the individual developer. As +such, if you are interested in deploying or shipping a driver as part of +solution intended to be used for purposes other than development, please +obtain a tested driver from Intel Customer Support at: + +http://support.intel.com + + +1. Introduction +=============== + +The following sections attempt to provide a brief introduction to using +the Intel(R) PRO/Wireless 2915ABG Driver for Linux. + +This document is not meant to be a comprehensive manual on +understanding or using wireless technologies, but should be sufficient +to get you moving without wires on Linux. + +For information on building and installing the driver, see the INSTALL +file. + + +1.1. Overview of Features +------------------------- +The current release (1.1.2) supports the following features: + ++ BSS mode (Infrastructure, Managed) ++ IBSS mode (Ad-Hoc) ++ WEP (OPEN and SHARED KEY mode) ++ 802.1x EAP via wpa_supplicant and xsupplicant ++ Wireless Extension support ++ Full B and G rate support (2200 and 2915) ++ Full A rate support (2915 only) ++ Transmit power control ++ S state support (ACPI suspend/resume) + +The following features are currently enabled, but not officially +supported: + ++ WPA ++ long/short preamble support ++ Monitor mode (aka RFMon) + +The distinction between officially supported and enabled is a reflection +on the amount of validation and interoperability testing that has been +performed on a given feature. + + + +1.2. Command Line Parameters +---------------------------- + +Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless +2915ABG Driver for Linux allows configuration options to be provided +as module parameters. The most common way to specify a module parameter +is via the command line. + +The general form is:: + + % modprobe ipw2200 parameter=value + +Where the supported parameter are: + + associate + Set to 0 to disable the auto scan-and-associate functionality of the + driver. If disabled, the driver will not attempt to scan + for and associate to a network until it has been configured with + one or more properties for the target network, for example configuring + the network SSID. Default is 0 (do not auto-associate) + + Example: % modprobe ipw2200 associate=0 + + auto_create + Set to 0 to disable the auto creation of an Ad-Hoc network + matching the channel and network name parameters provided. + Default is 1. + + channel + channel number for association. The normal method for setting + the channel would be to use the standard wireless tools + (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes + to set this while debugging. Channel 0 means 'ANY' + + debug + If using a debug build, this is used to control the amount of debug + info is logged. See the 'dvals' and 'load' script for more info on + how to use this (the dvals and load scripts are provided as part + of the ipw2200 development snapshot releases available from the + SourceForge project at http://ipw2200.sf.net) + + led + Can be used to turn on experimental LED code. + 0 = Off, 1 = On. Default is 1. + + mode + Can be used to set the default mode of the adapter. + 0 = Managed, 1 = Ad-Hoc, 2 = Monitor + + +1.3. Wireless Extension Private Methods +--------------------------------------- + +As an interface designed to handle generic hardware, there are certain +capabilities not exposed through the normal Wireless Tool interface. As +such, a provision is provided for a driver to declare custom, or +private, methods. The Intel(R) PRO/Wireless 2915ABG Driver for Linux +defines several of these to configure various settings. + +The general form of using the private wireless methods is:: + + % iwpriv $IFNAME method parameters + +Where $IFNAME is the interface name the device is registered with +(typically eth1, customized via one of the various network interface +name managers, such as ifrename) + +The supported private methods are: + + get_mode + Can be used to report out which IEEE mode the driver is + configured to support. Example: + + % iwpriv eth1 get_mode + eth1 get_mode:802.11bg (6) + + set_mode + Can be used to configure which IEEE mode the driver will + support. + + Usage:: + + % iwpriv eth1 set_mode {mode} + + Where {mode} is a number in the range 1-7: + + == ===================== + 1 802.11a (2915 only) + 2 802.11b + 3 802.11ab (2915 only) + 4 802.11g + 5 802.11ag (2915 only) + 6 802.11bg + 7 802.11abg (2915 only) + == ===================== + + get_preamble + Can be used to report configuration of preamble length. + + set_preamble + Can be used to set the configuration of preamble length: + + Usage:: + + % iwpriv eth1 set_preamble {mode} + + Where {mode} is one of: + + == ======================================== + 1 Long preamble only + 0 Auto (long or short based on connection) + == ======================================== + + +1.4. Sysfs Helper Files +----------------------- + +The Linux kernel provides a pseudo file system that can be used to +access various components of the operating system. The Intel(R) +PRO/Wireless 2915ABG Driver for Linux exposes several configuration +parameters through this mechanism. + +An entry in the sysfs can support reading and/or writing. You can +typically query the contents of a sysfs entry through the use of cat, +and can set the contents via echo. For example:: + + % cat /sys/bus/pci/drivers/ipw2200/debug_level + +Will report the current debug level of the driver's logging subsystem +(only available if CONFIG_IPW2200_DEBUG was configured when the driver +was built). + +You can set the debug level via:: + + % echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level + +Where $VALUE would be a number in the case of this sysfs entry. The +input to sysfs files does not have to be a number. For example, the +firmware loader used by hotplug utilizes sysfs entries for transferring +the firmware image from user space into the driver. + +The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries +at two levels -- driver level, which apply to all instances of the driver +(in the event that there are more than one device installed) and device +level, which applies only to the single specific instance. + + +1.4.1 Driver Level Sysfs Helper Files +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For the driver level files, look in /sys/bus/pci/drivers/ipw2200/ + + debug_level + This controls the same global as the 'debug' module parameter + + + +1.4.2 Device Level Sysfs Helper Files +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For the device level files, look in:: + + /sys/bus/pci/drivers/ipw2200/{PCI-ID}/ + +For example::: + + /sys/bus/pci/drivers/ipw2200/0000:02:01.0 + +For the device level files, see /sys/bus/pci/drivers/ipw2200: + + rf_kill + read - + + == ========================================= + 0 RF kill not enabled (radio on) + 1 SW based RF kill active (radio off) + 2 HW based RF kill active (radio off) + 3 Both HW and SW RF kill active (radio off) + == ========================================= + + write - + + == ================================================== + 0 If SW based RF kill active, turn the radio back on + 1 If radio is on, activate SW based RF kill + == ================================================== + + .. note:: + + If you enable the SW based RF kill and then toggle the HW + based RF kill from ON -> OFF -> ON, the radio will NOT come back on + + ucode + read-only access to the ucode version number + + led + read - + + == ================= + 0 LED code disabled + 1 LED code enabled + == ================= + + write - + + == ================ + 0 Disable LED code + 1 Enable LED code + == ================ + + + .. note:: + + The LED code has been reported to hang some systems when + running ifconfig and is therefore disabled by default. + + +1.5. Supported channels +----------------------- + +Upon loading the Intel(R) PRO/Wireless 2915ABG Driver for Linux, a +message stating the detected geography code and the number of 802.11 +channels supported by the card will be displayed in the log. + +The geography code corresponds to a regulatory domain as shown in the +table below. + + +------+----------------------------+--------------------+ + | | | Supported channels | + | Code | Geography +----------+---------+ + | | | 802.11bg | 802.11a | + +======+============================+==========+=========+ + | --- | Restricted | 11 | 0 | + +------+----------------------------+----------+---------+ + | ZZF | Custom US/Canada | 11 | 8 | + +------+----------------------------+----------+---------+ + | ZZD | Rest of World | 13 | 0 | + +------+----------------------------+----------+---------+ + | ZZA | Custom USA & Europe & High | 11 | 13 | + +------+----------------------------+----------+---------+ + | ZZB | Custom NA & Europe | 11 | 13 | + +------+----------------------------+----------+---------+ + | ZZC | Custom Japan | 11 | 4 | + +------+----------------------------+----------+---------+ + | ZZM | Custom | 11 | 0 | + +------+----------------------------+----------+---------+ + | ZZE | Europe | 13 | 19 | + +------+----------------------------+----------+---------+ + | ZZJ | Custom Japan | 14 | 4 | + +------+----------------------------+----------+---------+ + | ZZR | Rest of World | 14 | 0 | + +------+----------------------------+----------+---------+ + | ZZH | High Band | 13 | 4 | + +------+----------------------------+----------+---------+ + | ZZG | Custom Europe | 13 | 4 | + +------+----------------------------+----------+---------+ + | ZZK | Europe | 13 | 24 | + +------+----------------------------+----------+---------+ + | ZZL | Europe | 11 | 13 | + +------+----------------------------+----------+---------+ + +2. Ad-Hoc Networking +===================== + +When using a device in an Ad-Hoc network, it is useful to understand the +sequence and requirements for the driver to be able to create, join, or +merge networks. + +The following attempts to provide enough information so that you can +have a consistent experience while using the driver as a member of an +Ad-Hoc network. + +2.1. Joining an Ad-Hoc Network +------------------------------ + +The easiest way to get onto an Ad-Hoc network is to join one that +already exists. + +2.2. Creating an Ad-Hoc Network +------------------------------- + +An Ad-Hoc networks is created using the syntax of the Wireless tool. + +For Example: +iwconfig eth1 mode ad-hoc essid testing channel 2 + +2.3. Merging Ad-Hoc Networks +---------------------------- + + +3. Interaction with Wireless Tools +================================== + +3.1 iwconfig mode +----------------- + +When configuring the mode of the adapter, all run-time configured parameters +are reset to the value used when the module was loaded. This includes +channels, rates, ESSID, etc. + +3.2 iwconfig sens +----------------- + +The 'iwconfig ethX sens XX' command will not set the signal sensitivity +threshold, as described in iwconfig documentation, but rather the number +of consecutive missed beacons that will trigger handover, i.e. roaming +to another access point. At the same time, it will set the disassociation +threshold to 3 times the given value. + + +4. About the Version Numbers +============================= + +Due to the nature of open source development projects, there are +frequently changes being incorporated that have not gone through +a complete validation process. These changes are incorporated into +development snapshot releases. + +Releases are numbered with a three level scheme: + + major.minor.development + +Any version where the 'development' portion is 0 (for example +1.0.0, 1.1.0, etc.) indicates a stable version that will be made +available for kernel inclusion. + +Any version where the 'development' portion is not a 0 (for +example 1.0.1, 1.1.5, etc.) indicates a development version that is +being made available for testing and cutting edge users. The stability +and functionality of the development releases are not know. We make +efforts to try and keep all snapshots reasonably stable, but due to the +frequency of their release, and the desire to get those releases +available as quickly as possible, unknown anomalies should be expected. + +The major version number will be incremented when significant changes +are made to the driver. Currently, there are no major changes planned. + +5. Firmware installation +======================== + +The driver requires a firmware image, download it and extract the +files under /lib/firmware (or wherever your hotplug's firmware.agent +will look for firmware files) + +The firmware can be downloaded from the following URL: + + http://ipw2200.sf.net/ + + +6. Support +========== + +For direct support of the 1.0.0 version, you can contact +http://supportmail.intel.com, or you can use the open source project +support. + +For general information and support, go to: + + http://ipw2200.sf.net/ + + +7. License +========== + + Copyright |copy| 2003 - 2006 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + + James P. Ketrenos + + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + diff --git a/Documentation/networking/device_drivers/intel/ipw2200.txt b/Documentation/networking/device_drivers/intel/ipw2200.txt deleted file mode 100644 index b7658bed4906..000000000000 --- a/Documentation/networking/device_drivers/intel/ipw2200.txt +++ /dev/null @@ -1,472 +0,0 @@ - -Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of: - -Intel(R) PRO/Wireless 2200BG Network Connection -Intel(R) PRO/Wireless 2915ABG Network Connection - -Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) -PRO/Wireless 2200BG Driver for Linux is a unified driver that works on -both hardware adapters listed above. In this document the Intel(R) -PRO/Wireless 2915ABG Driver for Linux will be used to reference the -unified driver. - -Copyright (C) 2004-2006, Intel Corporation - -README.ipw2200 - -Version: 1.1.2 -Date : March 30, 2006 - - -Index ------------------------------------------------ -0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER -1. Introduction -1.1. Overview of features -1.2. Module parameters -1.3. Wireless Extension Private Methods -1.4. Sysfs Helper Files -1.5. Supported channels -2. Ad-Hoc Networking -3. Interacting with Wireless Tools -3.1. iwconfig mode -3.2. iwconfig sens -4. About the Version Numbers -5. Firmware installation -6. Support -7. License - - -0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER ------------------------------------------------ - -Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! - -Intel wireless LAN adapters are engineered, manufactured, tested, and -quality checked to ensure that they meet all necessary local and -governmental regulatory agency requirements for the regions that they -are designated and/or marked to ship into. Since wireless LANs are -generally unlicensed devices that share spectrum with radars, -satellites, and other licensed and unlicensed devices, it is sometimes -necessary to dynamically detect, avoid, and limit usage to avoid -interference with these devices. In many instances Intel is required to -provide test data to prove regional and local compliance to regional and -governmental regulations before certification or approval to use the -product is granted. Intel's wireless LAN's EEPROM, firmware, and -software driver are designed to carefully control parameters that affect -radio operation and to ensure electromagnetic compliance (EMC). These -parameters include, without limitation, RF power, spectrum usage, -channel scanning, and human exposure. - -For these reasons Intel cannot permit any manipulation by third parties -of the software provided in binary format with the wireless WLAN -adapters (e.g., the EEPROM and firmware). Furthermore, if you use any -patches, utilities, or code with the Intel wireless LAN adapters that -have been manipulated by an unauthorized party (i.e., patches, -utilities, or code (including open source code modifications) which have -not been validated by Intel), (i) you will be solely responsible for -ensuring the regulatory compliance of the products, (ii) Intel will bear -no liability, under any theory of liability for any issues associated -with the modified products, including without limitation, claims under -the warranty and/or issues arising from regulatory non-compliance, and -(iii) Intel will not provide or be required to assist in providing -support to any third parties for such modified products. - -Note: Many regulatory agencies consider Wireless LAN adapters to be -modules, and accordingly, condition system-level regulatory approval -upon receipt and review of test data documenting that the antennas and -system configuration do not cause the EMC and radio operation to be -non-compliant. - -The drivers available for download from SourceForge are provided as a -part of a development project. Conformance to local regulatory -requirements is the responsibility of the individual developer. As -such, if you are interested in deploying or shipping a driver as part of -solution intended to be used for purposes other than development, please -obtain a tested driver from Intel Customer Support at: - -http://support.intel.com - - -1. Introduction ------------------------------------------------ -The following sections attempt to provide a brief introduction to using -the Intel(R) PRO/Wireless 2915ABG Driver for Linux. - -This document is not meant to be a comprehensive manual on -understanding or using wireless technologies, but should be sufficient -to get you moving without wires on Linux. - -For information on building and installing the driver, see the INSTALL -file. - - -1.1. Overview of Features ------------------------------------------------ -The current release (1.1.2) supports the following features: - -+ BSS mode (Infrastructure, Managed) -+ IBSS mode (Ad-Hoc) -+ WEP (OPEN and SHARED KEY mode) -+ 802.1x EAP via wpa_supplicant and xsupplicant -+ Wireless Extension support -+ Full B and G rate support (2200 and 2915) -+ Full A rate support (2915 only) -+ Transmit power control -+ S state support (ACPI suspend/resume) - -The following features are currently enabled, but not officially -supported: - -+ WPA -+ long/short preamble support -+ Monitor mode (aka RFMon) - -The distinction between officially supported and enabled is a reflection -on the amount of validation and interoperability testing that has been -performed on a given feature. - - - -1.2. Command Line Parameters ------------------------------------------------ - -Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless -2915ABG Driver for Linux allows configuration options to be provided -as module parameters. The most common way to specify a module parameter -is via the command line. - -The general form is: - -% modprobe ipw2200 parameter=value - -Where the supported parameter are: - - associate - Set to 0 to disable the auto scan-and-associate functionality of the - driver. If disabled, the driver will not attempt to scan - for and associate to a network until it has been configured with - one or more properties for the target network, for example configuring - the network SSID. Default is 0 (do not auto-associate) - - Example: % modprobe ipw2200 associate=0 - - auto_create - Set to 0 to disable the auto creation of an Ad-Hoc network - matching the channel and network name parameters provided. - Default is 1. - - channel - channel number for association. The normal method for setting - the channel would be to use the standard wireless tools - (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes - to set this while debugging. Channel 0 means 'ANY' - - debug - If using a debug build, this is used to control the amount of debug - info is logged. See the 'dvals' and 'load' script for more info on - how to use this (the dvals and load scripts are provided as part - of the ipw2200 development snapshot releases available from the - SourceForge project at http://ipw2200.sf.net) - - led - Can be used to turn on experimental LED code. - 0 = Off, 1 = On. Default is 1. - - mode - Can be used to set the default mode of the adapter. - 0 = Managed, 1 = Ad-Hoc, 2 = Monitor - - -1.3. Wireless Extension Private Methods ------------------------------------------------ - -As an interface designed to handle generic hardware, there are certain -capabilities not exposed through the normal Wireless Tool interface. As -such, a provision is provided for a driver to declare custom, or -private, methods. The Intel(R) PRO/Wireless 2915ABG Driver for Linux -defines several of these to configure various settings. - -The general form of using the private wireless methods is: - - % iwpriv $IFNAME method parameters - -Where $IFNAME is the interface name the device is registered with -(typically eth1, customized via one of the various network interface -name managers, such as ifrename) - -The supported private methods are: - - get_mode - Can be used to report out which IEEE mode the driver is - configured to support. Example: - - % iwpriv eth1 get_mode - eth1 get_mode:802.11bg (6) - - set_mode - Can be used to configure which IEEE mode the driver will - support. - - Usage: - % iwpriv eth1 set_mode {mode} - Where {mode} is a number in the range 1-7: - 1 802.11a (2915 only) - 2 802.11b - 3 802.11ab (2915 only) - 4 802.11g - 5 802.11ag (2915 only) - 6 802.11bg - 7 802.11abg (2915 only) - - get_preamble - Can be used to report configuration of preamble length. - - set_preamble - Can be used to set the configuration of preamble length: - - Usage: - % iwpriv eth1 set_preamble {mode} - Where {mode} is one of: - 1 Long preamble only - 0 Auto (long or short based on connection) - - -1.4. Sysfs Helper Files: ------------------------------------------------ - -The Linux kernel provides a pseudo file system that can be used to -access various components of the operating system. The Intel(R) -PRO/Wireless 2915ABG Driver for Linux exposes several configuration -parameters through this mechanism. - -An entry in the sysfs can support reading and/or writing. You can -typically query the contents of a sysfs entry through the use of cat, -and can set the contents via echo. For example: - -% cat /sys/bus/pci/drivers/ipw2200/debug_level - -Will report the current debug level of the driver's logging subsystem -(only available if CONFIG_IPW2200_DEBUG was configured when the driver -was built). - -You can set the debug level via: - -% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level - -Where $VALUE would be a number in the case of this sysfs entry. The -input to sysfs files does not have to be a number. For example, the -firmware loader used by hotplug utilizes sysfs entries for transferring -the firmware image from user space into the driver. - -The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries -at two levels -- driver level, which apply to all instances of the driver -(in the event that there are more than one device installed) and device -level, which applies only to the single specific instance. - - -1.4.1 Driver Level Sysfs Helper Files ------------------------------------------------ - -For the driver level files, look in /sys/bus/pci/drivers/ipw2200/ - - debug_level - - This controls the same global as the 'debug' module parameter - - - -1.4.2 Device Level Sysfs Helper Files ------------------------------------------------ - -For the device level files, look in - - /sys/bus/pci/drivers/ipw2200/{PCI-ID}/ - -For example: - /sys/bus/pci/drivers/ipw2200/0000:02:01.0 - -For the device level files, see /sys/bus/pci/drivers/ipw2200: - - rf_kill - read - - 0 = RF kill not enabled (radio on) - 1 = SW based RF kill active (radio off) - 2 = HW based RF kill active (radio off) - 3 = Both HW and SW RF kill active (radio off) - write - - 0 = If SW based RF kill active, turn the radio back on - 1 = If radio is on, activate SW based RF kill - - NOTE: If you enable the SW based RF kill and then toggle the HW - based RF kill from ON -> OFF -> ON, the radio will NOT come back on - - ucode - read-only access to the ucode version number - - led - read - - 0 = LED code disabled - 1 = LED code enabled - write - - 0 = Disable LED code - 1 = Enable LED code - - NOTE: The LED code has been reported to hang some systems when - running ifconfig and is therefore disabled by default. - - -1.5. Supported channels ------------------------------------------------ - -Upon loading the Intel(R) PRO/Wireless 2915ABG Driver for Linux, a -message stating the detected geography code and the number of 802.11 -channels supported by the card will be displayed in the log. - -The geography code corresponds to a regulatory domain as shown in the -table below. - - Supported channels -Code Geography 802.11bg 802.11a - ---- Restricted 11 0 -ZZF Custom US/Canada 11 8 -ZZD Rest of World 13 0 -ZZA Custom USA & Europe & High 11 13 -ZZB Custom NA & Europe 11 13 -ZZC Custom Japan 11 4 -ZZM Custom 11 0 -ZZE Europe 13 19 -ZZJ Custom Japan 14 4 -ZZR Rest of World 14 0 -ZZH High Band 13 4 -ZZG Custom Europe 13 4 -ZZK Europe 13 24 -ZZL Europe 11 13 - - -2. Ad-Hoc Networking ------------------------------------------------ - -When using a device in an Ad-Hoc network, it is useful to understand the -sequence and requirements for the driver to be able to create, join, or -merge networks. - -The following attempts to provide enough information so that you can -have a consistent experience while using the driver as a member of an -Ad-Hoc network. - -2.1. Joining an Ad-Hoc Network ------------------------------------------------ - -The easiest way to get onto an Ad-Hoc network is to join one that -already exists. - -2.2. Creating an Ad-Hoc Network ------------------------------------------------ - -An Ad-Hoc networks is created using the syntax of the Wireless tool. - -For Example: -iwconfig eth1 mode ad-hoc essid testing channel 2 - -2.3. Merging Ad-Hoc Networks ------------------------------------------------ - - -3. Interaction with Wireless Tools ------------------------------------------------ - -3.1 iwconfig mode ------------------------------------------------ - -When configuring the mode of the adapter, all run-time configured parameters -are reset to the value used when the module was loaded. This includes -channels, rates, ESSID, etc. - -3.2 iwconfig sens ------------------------------------------------ - -The 'iwconfig ethX sens XX' command will not set the signal sensitivity -threshold, as described in iwconfig documentation, but rather the number -of consecutive missed beacons that will trigger handover, i.e. roaming -to another access point. At the same time, it will set the disassociation -threshold to 3 times the given value. - - -4. About the Version Numbers ------------------------------------------------ - -Due to the nature of open source development projects, there are -frequently changes being incorporated that have not gone through -a complete validation process. These changes are incorporated into -development snapshot releases. - -Releases are numbered with a three level scheme: - - major.minor.development - -Any version where the 'development' portion is 0 (for example -1.0.0, 1.1.0, etc.) indicates a stable version that will be made -available for kernel inclusion. - -Any version where the 'development' portion is not a 0 (for -example 1.0.1, 1.1.5, etc.) indicates a development version that is -being made available for testing and cutting edge users. The stability -and functionality of the development releases are not know. We make -efforts to try and keep all snapshots reasonably stable, but due to the -frequency of their release, and the desire to get those releases -available as quickly as possible, unknown anomalies should be expected. - -The major version number will be incremented when significant changes -are made to the driver. Currently, there are no major changes planned. - -5. Firmware installation ----------------------------------------------- - -The driver requires a firmware image, download it and extract the -files under /lib/firmware (or wherever your hotplug's firmware.agent -will look for firmware files) - -The firmware can be downloaded from the following URL: - - http://ipw2200.sf.net/ - - -6. Support ------------------------------------------------ - -For direct support of the 1.0.0 version, you can contact -http://supportmail.intel.com, or you can use the open source project -support. - -For general information and support, go to: - - http://ipw2200.sf.net/ - - -7. License ------------------------------------------------ - - Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - - Contact Information: - James P. Ketrenos - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -- cgit v1.2.3