From 7820ee1c4757d888c2255b8eb7f74b8d1e5ac555 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 5 Mar 2021 19:37:35 +0100 Subject: Bluetooth: btbcm: Rewrite bindings in YAML and add reset This rewrites the Broadcom bluetooth bindings in YAML and adds a GPIO handle for the BT_RST_N line as used on some platforms. The Ingenic UART binding was using this binding in its example DTS fragment, however mistakenly using "vcc-supply" for what is called "vbat-supply". The proper DTS files and the code in the kernel all use "vbat-supply" so fix up the example in this patch so we ge a clean check. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Marcel Holtmann --- .../devicetree/bindings/net/broadcom-bluetooth.txt | 56 ---------- .../bindings/net/broadcom-bluetooth.yaml | 117 +++++++++++++++++++++ .../devicetree/bindings/serial/ingenic,uart.yaml | 2 +- 3 files changed, 118 insertions(+), 57 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/broadcom-bluetooth.txt create mode 100644 Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt deleted file mode 100644 index a7d57ba5f2ac..000000000000 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ /dev/null @@ -1,56 +0,0 @@ -Broadcom Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Broadcom devices. - -Serial attached Broadcom devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - - compatible: should contain one of the following: - * "brcm,bcm20702a1" - * "brcm,bcm4329-bt" - * "brcm,bcm4330-bt" - * "brcm,bcm43438-bt" - * "brcm,bcm4345c5" - * "brcm,bcm43540-bt" - * "brcm,bcm4335a0" - -Optional properties: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - shutdown-gpios: GPIO specifier, used to enable the BT module - - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. - deprecated, replaced by interrupts and - "host-wakeup" interrupt-names - - clocks: 1 or 2 clocks as defined in clock-names below, in that order - - clock-names: names for clock inputs, matching the clocks given - - "extclk": deprecated, replaced by "txco" - - "txco": external reference clock (not a standalone crystal) - - "lpo": external low power 32.768 kHz clock - - vbat-supply: phandle to regulator supply for VBAT - - vddio-supply: phandle to regulator supply for VDDIO - - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array - - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S - - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps - - pcm-frame-type: short, long - - pcm-sync-mode: slave, master - - pcm-clock-mode: slave, master - - interrupts: must be one, used to wakeup the host processor - - interrupt-names: must be "host-wakeup" - -Example: - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <921600>; - brcm,bt-pcm-int-params = [01 02 00 01 01]; - }; -}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml new file mode 100644 index 000000000000..bdd6ca617e23 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Bluetooth Chips + +maintainers: + - Linus Walleij + +description: + This binding describes Broadcom UART-attached bluetooth chips. + +properties: + compatible: + enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + - brcm,bcm43438-bt + - brcm,bcm4345c5 + - brcm,bcm43540-bt + - brcm,bcm4335a0 + + shutdown-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_REG_ON used to + power on the BT module + + reset-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_RST_N used to + reset the BT module. This should be marked as + GPIO_ACTIVE_LOW. + + device-wakeup-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_WAKE used to + wakeup the controller. This is using the BT_GPIO_0 + pin on the chip when in use. + + host-wakeup-gpios: + maxItems: 1 + deprecated: true + description: GPIO specifier for the line HOST_WAKE used + to wakeup the host processor. This is using he BT_GPIO_1 + pin on the chip when in use. This is deprecated and replaced + by interrupts and "host-wakeup" interrupt-names + + clocks: + maxItems: 2 + description: 1 or 2 clocks as defined in clock-names below, + in that order + + clock-names: + description: Names of the 1 to 2 supplied clocks + items: + - const: txco + - const: lpo + - const: extclk + + vbat-supply: + description: phandle to regulator supply for VBAT + + vddio-supply: + description: phandle to regulator supply for VDDIO + + brcm,bt-pcm-int-params: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 5 + maxItems: 5 + description: |- + configure PCM parameters via a 5-byte array: + sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S + pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + pcm-frame-type: short, long + pcm-sync-mode: slave, master + pcm-clock-mode: slave, master + + interrupts: + items: + - description: Handle to the line HOST_WAKE used to wake + up the host processor. This uses the BT_GPIO_1 pin on + the chip when in use. + + interrupt-names: + items: + - const: host-wakeup + + max-speed: true + current-speed: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + #include + + uart { + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <921600>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + shutdown-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index 559213899d73..7748d8c3bab8 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -91,7 +91,7 @@ examples: bluetooth { compatible = "brcm,bcm4330-bt"; reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; - vcc-supply = <&wlan0_power>; + vbat-supply = <&wlan0_power>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From 71793730ebfdbd1b15c6648a67e8d42b83eb131d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 18 Mar 2021 09:43:08 +0100 Subject: Bluetooth: btbcm: Add BCM4334 DT binding BCM4334 was missing from the binding. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Marcel Holtmann --- Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml index bdd6ca617e23..fbdc2083bec4 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -18,6 +18,7 @@ properties: - brcm,bcm20702a1 - brcm,bcm4329-bt - brcm,bcm4330-bt + - brcm,bcm4334-bt - brcm,bcm43438-bt - brcm,bcm4345c5 - brcm,bcm43540-bt -- cgit v1.2.3