From 571b7e69f7f775c531ffaf73ae476b1e46150f41 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 2 Jun 2017 12:29:51 -0700 Subject: MIPS: generic/yamon-dt: Pull YAMON DT shim code out of SEAD-3 board In preparation for supporting other YAMON-using boards (Malta) & sharing code to translate information from YAMON into device tree properties, pull the code doing so for the kernel command line, system memory & serial configuration out of the SEAD-3 board code. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16181/ Signed-off-by: Ralf Baechle --- arch/mips/generic/Kconfig | 8 ++ arch/mips/generic/Makefile | 1 + arch/mips/generic/board-sead3.c | 178 +------------------------------------ arch/mips/generic/yamon-dt.c | 190 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 203 insertions(+), 174 deletions(-) create mode 100644 arch/mips/generic/yamon-dt.c (limited to 'arch/mips/generic') diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index a606b3f9196c..446b7c68133d 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -9,9 +9,17 @@ config LEGACY_BOARDS kernel is booted without being provided with an FDT via the UHI boot protocol. +config YAMON_DT_SHIM + bool + help + Select this from your board if the board uses the YAMON bootloader + and you wish to include code which helps translate various + YAMON-provided environment variables into a device tree properties. + config LEGACY_BOARD_SEAD3 bool "Support MIPS SEAD-3 boards" select LEGACY_BOARDS + select YAMON_DT_SHIM help Enable this to include support for booting on MIPS SEAD-3 FPGA-based development boards, which boot using a legacy boot protocol. diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile index acb9b6d62b16..56b3ea565ed9 100644 --- a/arch/mips/generic/Makefile +++ b/arch/mips/generic/Makefile @@ -12,5 +12,6 @@ obj-y += init.o obj-y += irq.o obj-y += proc.o +obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o obj-$(CONFIG_KEXEC) += kexec.o diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c index f4ae0584a33b..63fdc98738ba 100644 --- a/arch/mips/generic/board-sead3.c +++ b/arch/mips/generic/board-sead3.c @@ -17,6 +17,7 @@ #include #include #include +#include #define SEAD_CONFIG CKSEG1ADDR(0x1b100110) #define SEAD_CONFIG_GIC_PRESENT BIT(1) @@ -33,98 +34,6 @@ static __init bool sead3_detect(void) return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3; } -static __init int append_cmdline(void *fdt) -{ - int err, chosen_off; - - /* find or add chosen node */ - chosen_off = fdt_path_offset(fdt, "/chosen"); - if (chosen_off == -FDT_ERR_NOTFOUND) - chosen_off = fdt_path_offset(fdt, "/chosen@0"); - if (chosen_off == -FDT_ERR_NOTFOUND) - chosen_off = fdt_add_subnode(fdt, 0, "chosen"); - if (chosen_off < 0) { - pr_err("Unable to find or add DT chosen node: %d\n", - chosen_off); - return chosen_off; - } - - err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline()); - if (err) { - pr_err("Unable to set bootargs property: %d\n", err); - return err; - } - - return 0; -} - -static __init int append_memory(void *fdt) -{ - unsigned long phys_memsize, memsize; - __be32 mem_array[2]; - int err, mem_off; - char *var; - - /* find memory size from the bootloader environment */ - var = fw_getenv("memsize"); - if (var) { - err = kstrtoul(var, 0, &phys_memsize); - if (err) { - pr_err("Failed to read memsize env variable '%s'\n", - var); - return -EINVAL; - } - } else { - pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n"); - phys_memsize = 32 << 20; - } - - /* default to using all available RAM */ - memsize = phys_memsize; - - /* allow the user to override the usable memory */ - var = strstr(arcs_cmdline, "memsize="); - if (var) - memsize = memparse(var + strlen("memsize="), NULL); - - /* if the user says there's more RAM than we thought, believe them */ - phys_memsize = max_t(unsigned long, phys_memsize, memsize); - - /* find or add a memory node */ - mem_off = fdt_path_offset(fdt, "/memory"); - if (mem_off == -FDT_ERR_NOTFOUND) - mem_off = fdt_add_subnode(fdt, 0, "memory"); - if (mem_off < 0) { - pr_err("Unable to find or add memory DT node: %d\n", mem_off); - return mem_off; - } - - err = fdt_setprop_string(fdt, mem_off, "device_type", "memory"); - if (err) { - pr_err("Unable to set memory node device_type: %d\n", err); - return err; - } - - mem_array[0] = 0; - mem_array[1] = cpu_to_be32(phys_memsize); - err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array)); - if (err) { - pr_err("Unable to set memory regs property: %d\n", err); - return err; - } - - mem_array[0] = 0; - mem_array[1] = cpu_to_be32(memsize); - err = fdt_setprop(fdt, mem_off, "linux,usable-memory", - mem_array, sizeof(mem_array)); - if (err) { - pr_err("Unable to set linux,usable-memory property: %d\n", err); - return err; - } - - return 0; -} - static __init int remove_gic(void *fdt) { const unsigned int cpu_ehci_int = 2; @@ -214,85 +123,6 @@ static __init int remove_gic(void *fdt) return 0; } -static __init int serial_config(void *fdt) -{ - const char *yamontty, *mode_var; - char mode_var_name[9], path[18], parity; - unsigned int uart, baud, stop_bits; - bool hw_flow; - int chosen_off, err; - - yamontty = fw_getenv("yamontty"); - if (!yamontty || !strcmp(yamontty, "tty0")) { - uart = 0; - } else if (!strcmp(yamontty, "tty1")) { - uart = 1; - } else { - pr_warn("yamontty environment variable '%s' invalid\n", - yamontty); - uart = 0; - } - - baud = stop_bits = 0; - parity = 0; - hw_flow = false; - - snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart); - mode_var = fw_getenv(mode_var_name); - if (mode_var) { - while (mode_var[0] >= '0' && mode_var[0] <= '9') { - baud *= 10; - baud += mode_var[0] - '0'; - mode_var++; - } - if (mode_var[0] == ',') - mode_var++; - if (mode_var[0]) - parity = mode_var[0]; - if (mode_var[0] == ',') - mode_var++; - if (mode_var[0]) - stop_bits = mode_var[0] - '0'; - if (mode_var[0] == ',') - mode_var++; - if (!strcmp(mode_var, "hw")) - hw_flow = true; - } - - if (!baud) - baud = 38400; - - if (parity != 'e' && parity != 'n' && parity != 'o') - parity = 'n'; - - if (stop_bits != 7 && stop_bits != 8) - stop_bits = 8; - - WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s", - uart, baud, parity, stop_bits, - hw_flow ? "r" : "") >= sizeof(path)); - - /* find or add chosen node */ - chosen_off = fdt_path_offset(fdt, "/chosen"); - if (chosen_off == -FDT_ERR_NOTFOUND) - chosen_off = fdt_path_offset(fdt, "/chosen@0"); - if (chosen_off == -FDT_ERR_NOTFOUND) - chosen_off = fdt_add_subnode(fdt, 0, "chosen"); - if (chosen_off < 0) { - pr_err("Unable to find or add DT chosen node: %d\n", - chosen_off); - return chosen_off; - } - - err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path); - if (err) { - pr_err("Unable to set stdout-path property: %d\n", err); - return err; - } - - return 0; -} - static __init const void *sead3_fixup_fdt(const void *fdt, const void *match_data) { @@ -311,11 +141,11 @@ static __init const void *sead3_fixup_fdt(const void *fdt, if (err) panic("Unable to open FDT: %d", err); - err = append_cmdline(fdt_buf); + err = yamon_dt_append_cmdline(fdt_buf); if (err) panic("Unable to patch FDT: %d", err); - err = append_memory(fdt_buf); + err = yamon_dt_append_memory(fdt_buf); if (err) panic("Unable to patch FDT: %d", err); @@ -323,7 +153,7 @@ static __init const void *sead3_fixup_fdt(const void *fdt, if (err) panic("Unable to patch FDT: %d", err); - err = serial_config(fdt_buf); + err = yamon_dt_serial_config(fdt_buf); if (err) panic("Unable to patch FDT: %d", err); diff --git a/arch/mips/generic/yamon-dt.c b/arch/mips/generic/yamon-dt.c new file mode 100644 index 000000000000..9a0c8da5a796 --- /dev/null +++ b/arch/mips/generic/yamon-dt.c @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2016 Imagination Technologies + * Author: Paul Burton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#define pr_fmt(fmt) "yamon-dt: " fmt + +#include +#include +#include +#include +#include + +#include + +__init int yamon_dt_append_cmdline(void *fdt) +{ + int err, chosen_off; + + /* find or add chosen node */ + chosen_off = fdt_path_offset(fdt, "/chosen"); + if (chosen_off == -FDT_ERR_NOTFOUND) + chosen_off = fdt_path_offset(fdt, "/chosen@0"); + if (chosen_off == -FDT_ERR_NOTFOUND) + chosen_off = fdt_add_subnode(fdt, 0, "chosen"); + if (chosen_off < 0) { + pr_err("Unable to find or add DT chosen node: %d\n", + chosen_off); + return chosen_off; + } + + err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline()); + if (err) { + pr_err("Unable to set bootargs property: %d\n", err); + return err; + } + + return 0; +} + +__init int yamon_dt_append_memory(void *fdt) +{ + unsigned long phys_memsize, memsize; + __be32 mem_array[2]; + int err, mem_off; + char *var; + + /* find memory size from the bootloader environment */ + var = fw_getenv("memsize"); + if (var) { + err = kstrtoul(var, 0, &phys_memsize); + if (err) { + pr_err("Failed to read memsize env variable '%s'\n", + var); + return -EINVAL; + } + } else { + pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n"); + phys_memsize = 32 << 20; + } + + /* default to using all available RAM */ + memsize = phys_memsize; + + /* allow the user to override the usable memory */ + var = strstr(arcs_cmdline, "memsize="); + if (var) + memsize = memparse(var + strlen("memsize="), NULL); + + /* if the user says there's more RAM than we thought, believe them */ + phys_memsize = max_t(unsigned long, phys_memsize, memsize); + + /* find or add a memory node */ + mem_off = fdt_path_offset(fdt, "/memory"); + if (mem_off == -FDT_ERR_NOTFOUND) + mem_off = fdt_add_subnode(fdt, 0, "memory"); + if (mem_off < 0) { + pr_err("Unable to find or add memory DT node: %d\n", mem_off); + return mem_off; + } + + err = fdt_setprop_string(fdt, mem_off, "device_type", "memory"); + if (err) { + pr_err("Unable to set memory node device_type: %d\n", err); + return err; + } + + mem_array[0] = 0; + mem_array[1] = cpu_to_be32(phys_memsize); + err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array)); + if (err) { + pr_err("Unable to set memory regs property: %d\n", err); + return err; + } + + mem_array[0] = 0; + mem_array[1] = cpu_to_be32(memsize); + err = fdt_setprop(fdt, mem_off, "linux,usable-memory", + mem_array, sizeof(mem_array)); + if (err) { + pr_err("Unable to set linux,usable-memory property: %d\n", err); + return err; + } + + return 0; +} + +__init int yamon_dt_serial_config(void *fdt) +{ + const char *yamontty, *mode_var; + char mode_var_name[9], path[18], parity; + unsigned int uart, baud, stop_bits; + bool hw_flow; + int chosen_off, err; + + yamontty = fw_getenv("yamontty"); + if (!yamontty || !strcmp(yamontty, "tty0")) { + uart = 0; + } else if (!strcmp(yamontty, "tty1")) { + uart = 1; + } else { + pr_warn("yamontty environment variable '%s' invalid\n", + yamontty); + uart = 0; + } + + baud = stop_bits = 0; + parity = 0; + hw_flow = false; + + snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart); + mode_var = fw_getenv(mode_var_name); + if (mode_var) { + while (mode_var[0] >= '0' && mode_var[0] <= '9') { + baud *= 10; + baud += mode_var[0] - '0'; + mode_var++; + } + if (mode_var[0] == ',') + mode_var++; + if (mode_var[0]) + parity = mode_var[0]; + if (mode_var[0] == ',') + mode_var++; + if (mode_var[0]) + stop_bits = mode_var[0] - '0'; + if (mode_var[0] == ',') + mode_var++; + if (!strcmp(mode_var, "hw")) + hw_flow = true; + } + + if (!baud) + baud = 38400; + + if (parity != 'e' && parity != 'n' && parity != 'o') + parity = 'n'; + + if (stop_bits != 7 && stop_bits != 8) + stop_bits = 8; + + WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s", + uart, baud, parity, stop_bits, + hw_flow ? "r" : "") >= sizeof(path)); + + /* find or add chosen node */ + chosen_off = fdt_path_offset(fdt, "/chosen"); + if (chosen_off == -FDT_ERR_NOTFOUND) + chosen_off = fdt_path_offset(fdt, "/chosen@0"); + if (chosen_off == -FDT_ERR_NOTFOUND) + chosen_off = fdt_add_subnode(fdt, 0, "chosen"); + if (chosen_off < 0) { + pr_err("Unable to find or add DT chosen node: %d\n", + chosen_off); + return chosen_off; + } + + err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path); + if (err) { + pr_err("Unable to set stdout-path property: %d\n", err); + return err; + } + + return 0; +} -- cgit v1.2.3