From 6bdf8f3efe867c5893e27431a555e41f54ed7f9a Mon Sep 17 00:00:00 2001 From: Ann T Ropea Date: Tue, 7 Apr 2020 01:55:21 +0200 Subject: hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section The addition of the support for reading the temperature of ATA drives as per commit 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") lists in the respective Kconfig section the name of the module to be optionally built as "satatemp". However, building the kernel modules with "CONFIG_SENSORS_DRIVETEMP=m", does not generate a file named "satatemp.ko". Instead, the rest of the original commit uses the term "drivetemp" and a file named "drivetemp.ko" ends up in the kernel's modules directory. This file has the right ingredients: $ strings /path/to/drivetemp.ko | grep ^description description=Hard drive temperature monitor and modprobing it produces the expected result: # drivetemp is not loaded $ sensors -u drivetemp-scsi-4-0 Specified sensor(s) not found! $ sudo modprobe drivetemp $ sensors -u drivetemp-scsi-4-0 drivetemp-scsi-4-0 Adapter: SCSI adapter temp1: temp1_input: 35.000 temp1_max: 60.000 temp1_min: 0.000 temp1_crit: 70.000 temp1_lcrit: -40.000 temp1_lowest: 20.000 temp1_highest: 36.000 Fix Kconfig by referring to the true name of the module. Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") Signed-off-by: Ann T Ropea Link: https://lore.kernel.org/r/20200406235521.185309-1-bedhanger@gmx.de Signed-off-by: Guenter Roeck --- drivers/hwmon/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 05a30832c6ba..4c62f900bf7e 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -412,7 +412,7 @@ config SENSORS_DRIVETEMP hard disk drives. This driver can also be built as a module. If so, the module - will be called satatemp. + will be called drivetemp. config SENSORS_DS620 tristate "Dallas Semiconductor DS620" -- cgit v1.2.3