From 7bfe49785b28931297d9e6e811f88732914f8ff3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:45 +0100 Subject: pcmcia: soc_common: request legacy detect GPIO with active low Request the legacy card detect signal with the active low property and remove our own negation of the detection value. This allows us to use the firmware-defined polarities rather than hard-coding it into the driver. Signed-off-by: Russell King --- drivers/pcmcia/soc_common.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/pcmcia') diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index e499c2b8d7df..4036454b2785 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -165,8 +165,14 @@ static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) for (i = 0; i < ARRAY_SIZE(skt->stat); i++) { if (gpio_is_valid(skt->stat[i].gpio)) { + unsigned long flags = GPIOF_IN; + + /* CD is active low by default */ + if (i == SOC_STAT_CD) + flags |= GPIOF_ACTIVE_LOW; + ret = devm_gpio_request_one(skt->socket.dev.parent, - skt->stat[i].gpio, GPIOF_IN, + skt->stat[i].gpio, flags, skt->stat[i].name); if (ret) { __soc_pcmcia_hw_shutdown(skt, i); @@ -233,11 +239,8 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt) state.bvd1 = 1; state.bvd2 = 1; - /* CD is active low by default */ if (skt->stat[SOC_STAT_CD].desc) - state.detect = !gpiod_get_raw_value(skt->stat[SOC_STAT_CD].desc); - - /* RDY and BVD are active high by default */ + state.detect = !!gpiod_get_value(skt->stat[SOC_STAT_CD].desc); if (skt->stat[SOC_STAT_RDY].desc) state.ready = !!gpiod_get_value(skt->stat[SOC_STAT_RDY].desc); if (skt->stat[SOC_STAT_BVD1].desc) -- cgit v1.2.3