From f7e2f374799ff87cc0734cb3efe1a168aae77d8e Mon Sep 17 00:00:00 2001 From: Valentin Caron Date: Tue, 4 Jan 2022 19:24:42 +0100 Subject: serial: stm32: move tx dma terminate DMA to shutdown [ Upstream commit 56a23f9319e86e1d62a109896e2c7e52c414e67d ] Terminate DMA transaction and clear CR3_DMAT when shutdown is requested, instead of when remove is requested. If DMA transfer is not stopped in shutdown ops, driver will fail to start a new DMA transfer after next startup ops. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray Signed-off-by: Valentin Caron Link: https://lore.kernel.org/r/20220104182445.4195-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/stm32-usart.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 8f032e77b954..3366914dad7a 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -691,6 +691,11 @@ static void stm32_usart_shutdown(struct uart_port *port) u32 val, isr; int ret; + if (stm32_port->tx_dma_busy) { + dmaengine_terminate_async(stm32_port->tx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + } + /* Disable modem control interrupts */ stm32_usart_disable_ms(port); @@ -1385,7 +1390,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); if (stm32_port->tx_ch) { - dmaengine_terminate_async(stm32_port->tx_ch); stm32_usart_of_dma_tx_remove(stm32_port, pdev); dma_release_channel(stm32_port->tx_ch); } -- cgit v1.2.3