From 9a3daf58f98bae1d40a3629a8e59c98589801a11 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 9 Mar 2018 17:32:20 +0100 Subject: cpufreq: remove blackfin driver The blackfin architecture is getting removed, so this driver is now obsolete. Acked-by: Viresh Kumar Acked-by: Rafael J. Wysocki Acked-by: Aaron Wu Signed-off-by: Arnd Bergmann --- drivers/cpufreq/Makefile | 1 - drivers/cpufreq/blackfin-cpufreq.c | 217 ------------------------------------- 2 files changed, 218 deletions(-) delete mode 100644 drivers/cpufreq/blackfin-cpufreq.c (limited to 'drivers') diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index c60c1e141d9d..43e42542aa19 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -100,7 +100,6 @@ obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o ################################################################################## # Other platform drivers -obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c deleted file mode 100644 index 12e97d8a9db0..000000000000 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * Blackfin core clock scaling - * - * Copyright 2008-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -/* this is the table of CCLK frequencies, in Hz */ -/* .driver_data is the entry in the auxiliary dpm_state_table[] */ -static struct cpufreq_frequency_table bfin_freq_table[] = { - { - .frequency = CPUFREQ_TABLE_END, - .driver_data = 0, - }, - { - .frequency = CPUFREQ_TABLE_END, - .driver_data = 1, - }, - { - .frequency = CPUFREQ_TABLE_END, - .driver_data = 2, - }, - { - .frequency = CPUFREQ_TABLE_END, - .driver_data = 0, - }, -}; - -static struct bfin_dpm_state { - unsigned int csel; /* system clock divider */ - unsigned int tscale; /* change the divider on the core timer interrupt */ -} dpm_state_table[3]; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) -/* - * normalized to maximum frequency offset for CYCLES, - * used in time-ts cycles clock source, but could be used - * somewhere also. - */ -unsigned long long __bfin_cycles_off; -unsigned int __bfin_cycles_mod; -#endif - -/**************************************************************************/ -static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) -{ - - unsigned long csel, min_cclk; - int index; - - /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ -#if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ - && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) - min_cclk = sclk * 2; -#else - min_cclk = sclk; -#endif - -#ifndef CONFIG_BF60x - csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); -#else - csel = bfin_read32(CGU0_DIV) & 0x1F; -#endif - - for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { - bfin_freq_table[index].frequency = cclk >> index; -#ifndef CONFIG_BF60x - dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ -#else - dpm_state_table[index].csel = csel; -#endif - dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; - - pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", - bfin_freq_table[index].frequency, - dpm_state_table[index].csel, - dpm_state_table[index].tscale); - } - return; -} - -static void bfin_adjust_core_timer(void *info) -{ - unsigned int tscale; - unsigned int index = *(unsigned int *)info; - - /* we have to adjust the core timer, because it is using cclk */ - tscale = dpm_state_table[index].tscale; - bfin_write_TSCALE(tscale); - return; -} - -static unsigned int bfin_getfreq_khz(unsigned int cpu) -{ - /* Both CoreA/B have the same core clock */ - return get_cclk() / 1000; -} - -#ifdef CONFIG_BF60x -static int cpu_set_cclk(int cpu, unsigned long new) -{ - struct clk *clk; - int ret; - - clk = clk_get(NULL, "CCLK"); - if (IS_ERR(clk)) - return -ENODEV; - - ret = clk_set_rate(clk, new); - clk_put(clk); - return ret; -} -#endif - -static int bfin_target(struct cpufreq_policy *policy, unsigned int index) -{ -#ifndef CONFIG_BF60x - unsigned int plldiv; -#endif - static unsigned long lpj_ref; - static unsigned int lpj_ref_freq; - unsigned int old_freq, new_freq; - int ret = 0; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles_t cycles; -#endif - - old_freq = bfin_getfreq_khz(0); - new_freq = bfin_freq_table[index].frequency; - -#ifndef CONFIG_BF60x - plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; - bfin_write_PLL_DIV(plldiv); -#else - ret = cpu_set_cclk(policy->cpu, new_freq * 1000); - if (ret != 0) { - WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); - return ret; - } -#endif - on_each_cpu(bfin_adjust_core_timer, &index, 1); -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles = get_cycles(); - SSYNC(); - cycles += 10; /* ~10 cycles we lose after get_cycles() */ - __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); - __bfin_cycles_mod = index; -#endif - if (!lpj_ref_freq) { - lpj_ref = loops_per_jiffy; - lpj_ref_freq = old_freq; - } - if (new_freq != old_freq) { - loops_per_jiffy = cpufreq_scale(lpj_ref, - lpj_ref_freq, new_freq); - } - - return ret; -} - -static int __bfin_cpu_init(struct cpufreq_policy *policy) -{ - - unsigned long cclk, sclk; - - cclk = get_cclk() / 1000; - sclk = get_sclk() / 1000; - - if (policy->cpu == CPUFREQ_CPU) - bfin_init_tables(cclk, sclk); - - policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - - return cpufreq_table_validate_and_show(policy, bfin_freq_table); -} - -static struct cpufreq_driver bfin_driver = { - .verify = cpufreq_generic_frequency_table_verify, - .target_index = bfin_target, - .get = bfin_getfreq_khz, - .init = __bfin_cpu_init, - .name = "bfin cpufreq", - .attr = cpufreq_generic_attr, -}; - -static int __init bfin_cpu_init(void) -{ - return cpufreq_register_driver(&bfin_driver); -} - -static void __exit bfin_cpu_exit(void) -{ - cpufreq_unregister_driver(&bfin_driver); -} - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("cpufreq driver for Blackfin"); -MODULE_LICENSE("GPL"); - -module_init(bfin_cpu_init); -module_exit(bfin_cpu_exit); -- cgit v1.2.3