diff options
author | Vijay Khemka <vijaykhemka@fb.com> | 2019-12-02 06:33:29 +0300 |
---|---|---|
committer | Brad Bishop <bradleyb@fuzziesquirrel.com> | 2019-12-05 14:56:03 +0300 |
commit | 42a32b7a72aedd15b5fb0a40639ae05c38233538 (patch) | |
tree | e5ecc3edf3fdfada9cc5b141d9d3b638dd4f45fd | |
parent | eede92c62107b4bf68e9f13e32d2ade7839e9ffc (diff) | |
download | openbmc-42a32b7a72aedd15b5fb0a40639ae05c38233538.tar.xz |
meta-facebook: Introducing meta-yosemitev2
Initial introduction of Facebook Yosemite V2 platform. The Yosemite
V2 is a multi-node server platforms that hosts four OCP server and
equipped with Aspeed 2500 BMC SoC.
Tested: Built Facebook Yosemite v2 image and loaded on the
target hardware. Ensured that BMC boots to console.
(From meta-facebook rev: 83e4ecf31aa9b818e8bc9ed4e237f3f9e6a6c2a9)
Change-Id: Iaa22e15371292321b636e1e1cf4bbec2d6fe1bff
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
10 files changed, 563 insertions, 0 deletions
diff --git a/meta-facebook/meta-yosemitev2/conf/bblayers.conf.sample b/meta-facebook/meta-yosemitev2/conf/bblayers.conf.sample new file mode 100644 index 000000000..4e094efb6 --- /dev/null +++ b/meta-facebook/meta-yosemitev2/conf/bblayers.conf.sample @@ -0,0 +1,35 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "8" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-poky \ + ##OEROOT##/meta-openembedded/meta-oe \ + ##OEROOT##/meta-openembedded/meta-networking \ + ##OEROOT##/meta-openembedded/meta-perl \ + ##OEROOT##/meta-openembedded/meta-python \ + ##OEROOT##/meta-openembedded/meta-webserver \ + ##OEROOT##/meta-phosphor \ + ##OEROOT##/meta-aspeed \ + ##OEROOT##/meta-openpower \ + ##OEROOT##/meta-facebook \ + ##OEROOT##/meta-facebook/meta-yosemitev2 \ + " +BBLAYERS_NON_REMOVABLE ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-poky \ + ##OEROOT##/meta-openembedded/meta-oe \ + ##OEROOT##/meta-openembedded/meta-networking \ + ##OEROOT##/meta-openembedded/meta-perl \ + ##OEROOT##/meta-openembedded/meta-python \ + ##OEROOT##/meta-openembedded/meta-webserver \ + ##OEROOT##/meta-phosphor \ + ##OEROOT##/meta-aspeed \ + ##OEROOT##/meta-openpower \ + ##OEROOT##/meta-facebook \ + ##OEROOT##/meta-facebook/meta-yosemitev2 \ + " diff --git a/meta-facebook/meta-yosemitev2/conf/conf-notes.txt b/meta-facebook/meta-yosemitev2/conf/conf-notes.txt new file mode 100644 index 000000000..9b3c01a55 --- /dev/null +++ b/meta-facebook/meta-yosemitev2/conf/conf-notes.txt @@ -0,0 +1,2 @@ +Common targets are: + obmc-phosphor-image diff --git a/meta-facebook/meta-yosemitev2/conf/layer.conf b/meta-facebook/meta-yosemitev2/conf/layer.conf new file mode 100644 index 000000000..4c4571a68 --- /dev/null +++ b/meta-facebook/meta-yosemitev2/conf/layer.conf @@ -0,0 +1,11 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH .= ":${LAYERDIR}" + +# We have recipes-* directories, add to BBFILES +BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ + ${LAYERDIR}/recipes-*/*/*.bbappend" + +BBFILE_COLLECTIONS += "yosemitev2-layer" +BBFILE_PATTERN_yosemitev2-layer := "^${LAYERDIR}/" + +LAYERSERIES_COMPAT_tiogapass-layer := "warrior zeus" diff --git a/meta-facebook/meta-yosemitev2/conf/local.conf.sample b/meta-facebook/meta-yosemitev2/conf/local.conf.sample new file mode 100644 index 000000000..cbbcb84ef --- /dev/null +++ b/meta-facebook/meta-yosemitev2/conf/local.conf.sample @@ -0,0 +1,223 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +MACHINE ??= "yosemitev2" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "openbmc-phosphor" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_rpm" + +# +# SDK/ADT target architecture +# +# This variable specifies the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +SANITY_TESTED_DISTROS_append ?= " *" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necessary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. This assumes there is a +# libsdl library available on your build system. +#PACKAGECONFIG_append_pn-qemu-native = " sdl" +#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Set the root password to '0penBmc' +INHERIT += "extrausers" + +EXTRA_USERS_PARAMS = " \ + usermod -p '\$1\$UGMqyqdG\$FZiylVFmRRfl9Z0Ue8G7e/' root; \ + " diff --git a/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf b/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf new file mode 100644 index 000000000..43e156fac --- /dev/null +++ b/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf @@ -0,0 +1,21 @@ +KMACHINE = "aspeed" +KERNEL_DEVICETREE = "${KMACHINE}-bmc-facebook-${MACHINE}.dtb" + +UBOOT_MACHINE = "ast_g5_ncsi_config" + +require conf/machine/include/ast2500.inc +require conf/machine/include/obmc-bsp-common.inc + +OBMC_MACHINE_FEATURES += "\ + obmc-phosphor-fan-mgmt \ + obmc-phosphor-chassis-mgmt \ + obmc-phosphor-flash-mgmt \ + obmc-host-ipmi \ + obmc-host-state-mgmt \ + obmc-chassis-state-mgmt \ + obmc-bmc-state-mgmt \ + " +PREFERRED_PROVIDER_virtual/obmc-host-ctl ?= "" +FLASH_SIZE = "32768" +VIRTUAL-RUNTIME_skeleton_workbook = "${MACHINE}-config" + diff --git a/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-board-aspeed-Add-Mux-for-yosemitev2.patch b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-board-aspeed-Add-Mux-for-yosemitev2.patch new file mode 100644 index 000000000..5634ce936 --- /dev/null +++ b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-board-aspeed-Add-Mux-for-yosemitev2.patch @@ -0,0 +1,259 @@ +From c2e01a4cc220b9a1c1a6bb52e5f58bcc8d2edc55 Mon Sep 17 00:00:00 2001 +From: manikandan-e <manikandan.hcl.ers.epl@gmail.com> +Date: Wed, 30 Oct 2019 19:43:51 +0530 +Subject: [PATCH 2/2] board-aspeed-Add-Mux-for-yosemitev2 + +Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@gmail.com> + +--- + arch/arm/mach-aspeed/platform_g5.S | 213 +++++++++++++++++++++++++++++++------ + 1 file changed, 183 insertions(+), 30 deletions(-) + +diff --git a/arch/arm/mach-aspeed/platform_g5.S b/arch/arm/mach-aspeed/platform_g5.S +index 2ac1ca4..c3ce077 100644 +--- a/arch/arm/mach-aspeed/platform_g5.S ++++ b/arch/arm/mach-aspeed/platform_g5.S +@@ -302,6 +302,156 @@ TIME_TABLE_DDR4_1600: + ldr r2, =0x00000800 + .endm + ++ .macro console_bmc ++ ldr r0, =0x1e780024 ++ldr r1, [r0] ++orr r1, r1, #0xF ++str r1, [r0] ++ ++ldr r0, =0x1e780020 ++ldr r1, [r0] ++and r1, r1, #0xFFFFFFF0 ++orr r1, r1, #0xC ++str r1, [r0] ++.endm ++ ++.macro console_sel ++ ++ // Disable SoL UARTs[1-4] ++ ldr r0, =0x1e6e2080 ++ ldr r1, [r0] ++ ldr r2, =0xBFBFFFFF ++ and r1, r1, r2 ++ str r1, [r0] ++ ++ ldr r0, =0x1e6e2084 ++ ldr r1, [r0] ++ and r1, r1, r2 ++ str r1, [r0] ++ // Enable GPIOE[0-3] Tolerant ++ ldr r0, =0x1e78003c ++ ldr r1, [r0] ++ orr r1, r1, #0xF ++ str r1, [r0] ++ ++ // Read debug card present ++ ldr r2, =0x1e780080 ++ ldr r0, [r2] ++ and r0, r0, #0x00000800 ++ ldr r1, =0x0800 ++ cmp r0, r1 ++ bne dbg_card_pres\@ ++ console_bmc ++ b case_end\@ ++ ++dbg_card_pres\@: ++ // Read key position ++ ldr r2, =0x1e7801e0 ++ ldr r0, [r2] ++ bic r1, r0, #0xFF0FFFFF ++ mov r0, r1, lsr #20 ++ //Test for position#1 ++ ldr r1, =0x00 ++ cmp r0, r1 ++ bne case_pos2\@ ++ console_bmc ++ b case_end\@ ++case_pos2\@: ++ //Test for position#2 ++ ldr r1, =0x01 ++ cmp r0, r1 ++ bne case_pos3\@ ++ console_bmc ++ b case_end\@ ++case_pos3\@: ++ //Test for position#3 ++ ldr r1, =0x02 ++ cmp r0, r1 ++ bne case_pos4\@ ++ console_bmc ++ b case_end\@ ++case_pos4\@: ++//Test for position#4 ++ ldr r1, =0x03 ++ cmp r0, r1 ++ bne case_pos5\@ ++ console_bmc ++ b case_end\@ ++case_pos5\@: ++ //Test for position#5 ++ ldr r1, =0x04 ++ cmp r0, r1 ++ bne case_pos6\@ ++ console_bmc ++ b case_end\@ ++case_pos6\@: ++ //Test for position#6 ++ ldr r1, =0x05 ++ cmp r0, r1 ++ bne case_pos7\@ ++ console_bmc ++ b case_end\@ ++case_pos7\@: ++ //Test for position#7 ++ ldr r1, =0x06 ++ cmp r0, r1 ++ bne case_pos8\@ ++ console_bmc ++ b case_end\@ ++case_pos8\@: ++ //Test for position#8 ++ ldr r1, =0x07 ++ cmp r0, r1 ++ bne case_pos9\@ ++ console_bmc ++ b case_end\@ ++case_pos9\@: ++ //Test for position#9 ++ ldr r1, =0x08 ++ cmp r0, r1 ++ bne case_pos10\@ ++ console_bmc ++ b case_end\@ ++case_pos10\@: ++ //Test for position#10 ++ ldr r1, =0x09 ++ cmp r0, r1 ++ bne case_end\@ ++ console_bmc ++ b case_end\@ ++case_end\@: ++.endm ++ ++ .macro uart_console_setup ++ console_sel ++ /* setup UART console */ ++ ldr r0, =0x1E78400C ++ mov r1, #0x83 ++ str r1, [r0] ++ ++ ldr r0, =0x1e6e202c ++ ldr r2, [r0] ++ mov r2, r2, lsr #12 ++ tst r2, #0x01 ++ ldr r0, =0x1E784000 ++ moveq r1, #0x0D @ Baudrate 115200 ++ movne r1, #0x01 @ Baudrate 115200, div13 ++ ++ str r1, [r0] ++ ++ ldr r0, =0x1E784004 ++ mov r1, #0x00 ++ str r1, [r0] ++ ++ ldr r0, =0x1E78400C ++ mov r1, #0x03 ++ str r1, [r0] ++ ++ ldr r0, =0x1E784008 ++ mov r1, #0x07 ++ str r1, [r0] ++ .endm ++ + .macro print_hex_char + and r1, r1, #0xF + cmp r1, #9 +@@ -324,6 +474,36 @@ init_dram: + /******************************************** + Initial Reset Procedure : Begin + *******************************************/ ++ /* save into SRAM */ ++ ldr r0, =0x1e720200 /* vbs.uboot_exec_address */ ++ str r4, [r0] ++ ++ uart_console_setup ++ ++ /* Debug - UART console message */ ++ ldr r0, =0x1E784000 ++ mov r1, #0x0D @ '\r' ++ str r1, [r0] ++ mov r1, #0x0A @ '\n' ++ str r1, [r0] ++ mov r1, #0x54 @ 'S' ++ str r1, [r0] ++ mov r1, #0x50 @ 'P' ++ str r1, [r0] ++ mov r1, #0x4C @ 'L' ++ str r1, [r0] ++ mov r1, #0x0D @ '\r' ++ str r1, [r0] ++ mov r1, #0x0A @ '\n' ++ str r1, [r0] ++ /* End Debug - UART console message */ ++ ++ ++ ++ ldr r0, =0x1E720204 ++ mov r1, #0x0 ++ str r1, [r0] ++ + /* Clear AHB bus lock condition */ + ldr r0, =0x1e600000 + ldr r1, =0xAEED1A03 +@@ -793,7 +973,9 @@ wait_ddr_reset: + clear_delay_timer + /* end delay 10ms */ + +-/* Debug - UART console message */ ++ uart_console_setup ++ ++ /* Debug - UART console message */ + #ifdef CONFIG_DRAM_UART_TO_UART1 + ldr r0, =0x1e78909c @ route UART5 to UART Port1, 2016.08.29 + ldr r1, =0x10000004 +@@ -806,35 +988,6 @@ wait_ddr_reset: + str r1, [r0] + #endif + +- ldr r0, =0x1e78400c +- mov r1, #0x83 +- str r1, [r0] +- +- ldr r0, =0x1e6e202c +- ldr r2, [r0] +- mov r2, r2, lsr #12 +- tst r2, #0x01 +- ldr r0, =0x1e784000 +- moveq r1, #0x0D @ Baudrate 115200 +- movne r1, #0x01 @ Baudrate 115200, div13 +-#ifdef CONFIG_DRAM_UART_38400 +- moveq r1, #0x27 @ Baudrate 38400 +- movne r1, #0x03 @ Baudrate 38400 , div13 +-#endif +- str r1, [r0] +- +- ldr r0, =0x1e784004 +- mov r1, #0x00 +- str r1, [r0] +- +- ldr r0, =0x1e78400c +- mov r1, #0x03 +- str r1, [r0] +- +- ldr r0, =0x1e784008 +- mov r1, #0x07 +- str r1, [r0] +- + ldr r0, =0x1e784000 + mov r1, #0x0D @ '\r' + str r1, [r0] +-- +2.7.4 + diff --git a/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend new file mode 100644 index 000000000..51d98a504 --- /dev/null +++ b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend @@ -0,0 +1,2 @@ +FILESEXTRAPATHS_prepend_yosemitev2 := "${THISDIR}/${PN}:" +SRC_URI_append_yosemitev2 = " file://0002-board-aspeed-Add-Mux-for-yosemitev2.patch" diff --git a/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed/yosemitev2.cfg b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed/yosemitev2.cfg new file mode 100644 index 000000000..7ea8dc31a --- /dev/null +++ b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed/yosemitev2.cfg @@ -0,0 +1,6 @@ +CONFIG_SENSORS_TMP421=y +CONFIG_SENSORS_MAX31785=y +CONFIG_RTC_DRV_RV8803=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y +CONFIG_NCSI_OEM_CMD_GET_MAC=y diff --git a/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed_%.bbappend new file mode 100644 index 000000000..9020b66fb --- /dev/null +++ b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed_%.bbappend @@ -0,0 +1,2 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/linux-aspeed:" +SRC_URI += "file://yosemitev2.cfg" diff --git a/meta-facebook/meta-yosemitev2/recipes.txt b/meta-facebook/meta-yosemitev2/recipes.txt new file mode 100644 index 000000000..73263d85d --- /dev/null +++ b/meta-facebook/meta-yosemitev2/recipes.txt @@ -0,0 +1,2 @@ +recipes-kernel - The kernel and generic applications/libraries with strong kernel dependencies +recipes-bsp - Aspeed BSP with uboot |