diff options
author | Joel Stanley <joel@jms.id.au> | 2018-08-28 21:09:10 +0300 |
---|---|---|
committer | Brad Bishop <bradleyb@fuzziesquirrel.com> | 2018-09-04 22:39:10 +0300 |
commit | f1ade61b5994799a4cffca0c124b2ed36e640cbf (patch) | |
tree | a3b8ffe2a1d14071fa9131433e9cbfada5260ebe /MAINTAINERS | |
parent | cb7651db75f7d9614e18de0260fc4c96e3a6cefa (diff) | |
download | openbmc-f1ade61b5994799a4cffca0c124b2ed36e640cbf.tar.xz |
linux: Move to 4.18 based tree
This rebases the OpenBMC kernel tree on a 4.18 base. There are 85
patches backported from 4.19-rc1, and the following 39 out of tree
patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
ARM: dts: aspeed: witherspoon: Update max31785 node
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (4):
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto
ARM: dts: aspeed: Add Power9 CFAM description
Brad Bishop (1):
ARM: configs: Remove atags from Aspeed G4 config
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (6):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
ARM: dts: aspeed: Add "spi-max-frequency" property
Edward A. James (2):
drivers/fsi: Add On-Chip Controller (OCC) driver
hwmon: Add On-Chip Controller (OCC) hwmon driver
Joel Stanley (15):
ARM: dts: aspeed-palmetto: Add LPC control node
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Enable VHUB on Romulus
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
ARM: config: aspeed: Add out of tree drivers
ARM: dts: Add OCC description to Power9 dtsi
(From meta-aspeed rev: 2f1187b1bff8d52ddd93f2c5b598eec7ddc9f4f6)
Change-Id: I4035abcdcfa9a083599e27661fed5351fc6532fd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Diffstat (limited to 'MAINTAINERS')
0 files changed, 0 insertions, 0 deletions