diff options
author | jmbills <jason.m.bills@intel.com> | 2022-01-18 21:55:05 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-01-18 21:55:05 +0300 |
commit | 7cf0c1cd0ce835d1833509b7b911e8a97380278b (patch) | |
tree | 0b45c3beaa9874facc4ed1a2395a31e42be0135d /meta-ampere/meta-jade/recipes-bsp | |
parent | 4dac5fcd49b5e2de1074f1363775ec0f19041072 (diff) | |
parent | 1fc0d70f658da30091bcd49f9bf29aecd6b99ba7 (diff) | |
download | openbmc-7cf0c1cd0ce835d1833509b7b911e8a97380278b.tar.xz |
Merge pull request #76 from Intel-BMC/update1-0.86
Update
Diffstat (limited to 'meta-ampere/meta-jade/recipes-bsp')
7 files changed, 0 insertions, 1048 deletions
diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0001-aspeed-scu-Switch-PWM-pin-to-GPIO-input-mode.patch b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0001-aspeed-scu-Switch-PWM-pin-to-GPIO-input-mode.patch deleted file mode 100644 index b714be4c6..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0001-aspeed-scu-Switch-PWM-pin-to-GPIO-input-mode.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 03dcf584823b8b7db7d437257dbb45bd4b7f95b4 Mon Sep 17 00:00:00 2001 -From: Chanh Nguyen <chnguyen@amperecomputing.com> -Date: Mon, 21 Dec 2020 07:01:14 +0000 -Subject: [PATCH] aspeed/scu : Switch PWM pin to GPIO input mode - -In hardware design, the PWM pins will be at a high level if they are -configured in GPIO Input mode. This commit configures all PWM function -pins to input GPIO mode. This will allow fans to run at full speed when BMC resets or in U-boot. - -Signed-off-by: Chanh Nguyen <chnguyen@amperecomputing.com> ---- - arch/arm/include/asm/arch-aspeed/ast_scu.h | 1 + - arch/arm/mach-aspeed/ast-scu.c | 12 ++++++++++++ - board/aspeed/ast-g5/ast-g5.c | 10 ++++++++++ - include/configs/ast-g5-phy.h | 3 +++ - 4 files changed, 26 insertions(+) - -diff --git a/arch/arm/include/asm/arch-aspeed/ast_scu.h b/arch/arm/include/asm/arch-aspeed/ast_scu.h -index dcbc6730d4..d2c010a0dc 100644 ---- a/arch/arm/include/asm/arch-aspeed/ast_scu.h -+++ b/arch/arm/include/asm/arch-aspeed/ast_scu.h -@@ -45,5 +45,6 @@ extern u32 ast_scu_get_vga_memsize(void); - extern void ast_scu_init_eth(u8 num); - extern void ast_scu_multi_func_eth(u8 num); - extern void ast_scu_multi_func_romcs(u8 num); -+extern void ast_scu_switch_pwm_to_gpio_mode(void); - - #endif -diff --git a/arch/arm/mach-aspeed/ast-scu.c b/arch/arm/mach-aspeed/ast-scu.c -index 12de9b8036..ef90ef3805 100644 ---- a/arch/arm/mach-aspeed/ast-scu.c -+++ b/arch/arm/mach-aspeed/ast-scu.c -@@ -443,6 +443,18 @@ void ast_scu_multi_func_eth(u8 num) - } - } - -+void ast_scu_switch_pwm_to_gpio_mode(void) -+{ -+ ast_scu_write(ast_scu_read(AST_SCU_FUN_PIN_CTRL3) & -+ ~SCU_FUN_PIN_VPIG2 & -+ ~SCU_FUN_PIN_VPIG3 & -+ ~SCU_FUN_PIN_VPIG4 & -+ ~SCU_FUN_PIN_VPIG5 & -+ ~SCU_FUN_PIN_VPIG6 & -+ ~SCU_FUN_PIN_VPIG7, -+ AST_SCU_FUN_PIN_CTRL3); -+} -+ - void ast_scu_multi_func_romcs(u8 num) - { - ast_scu_write(ast_scu_read(AST_SCU_FUN_PIN_CTRL3) | -diff --git a/board/aspeed/ast-g5/ast-g5.c b/board/aspeed/ast-g5/ast-g5.c -index e67a4bf8b2..fba22a728e 100644 ---- a/board/aspeed/ast-g5/ast-g5.c -+++ b/board/aspeed/ast-g5/ast-g5.c -@@ -24,6 +24,16 @@ int board_init(void) - return 0; - } - -+#ifdef CONFIG_BOARD_LATE_INIT -+int board_late_init(void) -+{ -+ /* Switch PWM to GPIO mode to make FAN run in max speed */ -+ ast_scu_switch_pwm_to_gpio_mode(); -+ -+ return 0; -+} -+#endif -+ - int dram_init(void) - { - u32 vga = ast_scu_get_vga_memsize(); -diff --git a/include/configs/ast-g5-phy.h b/include/configs/ast-g5-phy.h -index 62ddb841e5..5443a26cab 100644 ---- a/include/configs/ast-g5-phy.h -+++ b/include/configs/ast-g5-phy.h -@@ -30,4 +30,7 @@ - /* platform.S */ - #define CONFIG_DRAM_ECC_SIZE 0x10000000 - -+/* Call board_late_init */ -+#define CONFIG_BOARD_LATE_INIT 1 -+ - #endif /* __AST_G5_PHY_CONFIG_H */ --- -2.25.1 - diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0002-aspeed-Disable-internal-PD-resistors-for-GPIOs.patch b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0002-aspeed-Disable-internal-PD-resistors-for-GPIOs.patch deleted file mode 100644 index 249d4398f..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0002-aspeed-Disable-internal-PD-resistors-for-GPIOs.patch +++ /dev/null @@ -1,45 +0,0 @@ -From c6e0470d82417b79b23f218c6db1099eb6e160af Mon Sep 17 00:00:00 2001 -From: "Thang Q. Nguyen" <thang@os.amperecomputing.com> -Date: Wed, 23 Dec 2020 04:42:21 +0000 -Subject: [PATCH] aspeed: Disable internal PD resistors for GPIOs - -Configure SCU8C - Multi-function pin control 4 to disable internal pull -down resistors for GPIOJ, GPIOG/GPIOAB, GPIOD/GPIOY, GPIOC/GPIOS as -external resistors are already installed. - -Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> ---- - board/aspeed/ast-g5/ast-g5.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -diff --git a/board/aspeed/ast-g5/ast-g5.c b/board/aspeed/ast-g5/ast-g5.c -index fba22a728e..9bf6c905fe 100644 ---- a/board/aspeed/ast-g5/ast-g5.c -+++ b/board/aspeed/ast-g5/ast-g5.c -@@ -27,9 +27,23 @@ int board_init(void) - #ifdef CONFIG_BOARD_LATE_INIT - int board_late_init(void) - { -+ u32 val; -+ - /* Switch PWM to GPIO mode to make FAN run in max speed */ - ast_scu_switch_pwm_to_gpio_mode(); - -+ /* -+ * Disable internal pull down resistor for GPIOJ, -+ * GPIOG/GPIOAB, GPIOD/GPIOY, GPIOC/GPIOS as external pull up/down -+ * resistors are installed already. Unlock SCU regs before writing. -+ */ -+ writel(SCU_PROTECT_UNLOCK, AST_SCU_BASE); -+ val = readl(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL4) | 0x024C0000; -+ writel(val, AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL4); -+#ifdef CONFIG_AST_SCU_LOCK -+ writel(0xaa, AST_SCU_BASE); -+#endif -+ - return 0; - } - #endif --- -2.25.1 - diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0003-aspeed-support-passing-system-reset-status-to-kernel.patch b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0003-aspeed-support-passing-system-reset-status-to-kernel.patch deleted file mode 100644 index 0381b5d84..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0003-aspeed-support-passing-system-reset-status-to-kernel.patch +++ /dev/null @@ -1,180 +0,0 @@ -From af4353ab19aaf29dc68ff89a0d581102ca5be43c Mon Sep 17 00:00:00 2001 -From: "Thang Q. Nguyen" <thang@os.amperecomputing.com> -Date: Wed, 6 Jan 2021 06:33:36 +0000 -Subject: [PATCH] aspeed: support passing system reset status to kernel via - bootargs - -This is a backport of the patch file from -openbmc/meta-yadro/meta-nicole/recipes-bsp/u-boot/ -to add the Aspeed reset reason to bootargs so kernel applications -can query it. - -Test case: /proc/cmdline must contain: - - resetreason=power after cold bmc boot - - resetreason=watchdog after warm bmc reboot - -Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> -Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> ---- - arch/arm/include/asm/arch-aspeed/ast_scu.h | 2 +- - arch/arm/mach-aspeed/ast-scu.c | 6 +- - board/aspeed/ast-g5/ast-g5.c | 81 ++++++++++++++++++++++ - 3 files changed, 87 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/include/asm/arch-aspeed/ast_scu.h b/arch/arm/include/asm/arch-aspeed/ast_scu.h -index d2c010a0dc..f5c9126ec0 100644 ---- a/arch/arm/include/asm/arch-aspeed/ast_scu.h -+++ b/arch/arm/include/asm/arch-aspeed/ast_scu.h -@@ -29,7 +29,7 @@ - #define __AST_SCU_H - - extern void ast_scu_show_system_info (void); --extern void ast_scu_sys_rest_info(void); -+extern u32 ast_scu_sys_rest_info(void); - extern void ast_scu_security_info(void); - extern u32 ast_scu_revision_id(void); - extern u32 ast_scu_get_vga_memsize(void); -diff --git a/arch/arm/mach-aspeed/ast-scu.c b/arch/arm/mach-aspeed/ast-scu.c -index ef90ef3805..c7ab66415f 100644 ---- a/arch/arm/mach-aspeed/ast-scu.c -+++ b/arch/arm/mach-aspeed/ast-scu.c -@@ -494,22 +494,26 @@ void ast_scu_security_info(void) - } - } - --void ast_scu_sys_rest_info(void) -+u32 ast_scu_sys_rest_info(void) - { - u32 rest = ast_scu_read(AST_SCU_SYS_CTRL); - - if (rest & SCU_SYS_EXT_RESET_FLAG) { - printf("RST : External\n"); - ast_scu_write(SCU_SYS_EXT_RESET_FLAG, AST_SCU_SYS_CTRL); -+ rest = SCU_SYS_EXT_RESET_FLAG; - } else if (rest & SCU_SYS_WDT_RESET_FLAG) { - printf("RST : Watchdog\n"); - ast_scu_write(SCU_SYS_WDT_RESET_FLAG, AST_SCU_SYS_CTRL); -+ rest = SCU_SYS_WDT_RESET_FLAG; - } else if (rest & SCU_SYS_PWR_RESET_FLAG) { - printf("RST : Power On\n"); - ast_scu_write(SCU_SYS_PWR_RESET_FLAG, AST_SCU_SYS_CTRL); -+ rest = SCU_SYS_PWR_RESET_FLAG; - } else { - printf("RST : CLK en\n"); - } -+ return rest; - } - - u32 ast_scu_get_vga_memsize(void) -diff --git a/board/aspeed/ast-g5/ast-g5.c b/board/aspeed/ast-g5/ast-g5.c -index 9bf6c905fe..9e27bce0f5 100644 ---- a/board/aspeed/ast-g5/ast-g5.c -+++ b/board/aspeed/ast-g5/ast-g5.c -@@ -8,6 +8,8 @@ - */ - - #include <common.h> -+#include <stdlib.h> -+#include <asm/arch/regs-scu.h> - #include <netdev.h> - - #include <asm/arch/ast_scu.h> -@@ -25,9 +27,76 @@ int board_init(void) - } - - #ifdef CONFIG_BOARD_LATE_INIT -+static void update_bootargs_cmd(const char *key, const char *value) -+{ -+ int buf_len; -+ char *buf; -+ char *cmdline; -+ char *end = NULL; -+ -+ if (!key || (key[0] == '\0')) { -+ printf("%s: Empty key not allowed\n", __func__); -+ return; -+ } -+ -+ cmdline = getenv("bootargs"); -+ -+ /* Allocate space for maximum possible new command line */ -+ buf_len = (cmdline ? strlen(cmdline) : 0) -+ + 1 /* spacebar as delimiter */ -+ + strlen(key) -+ + (value ? 1 /* equal sign */ + strlen(value) : 0) -+ + 1 /* terminating null */; -+ -+ buf = calloc(buf_len, sizeof(char)); -+ if (!buf) { -+ printf("%s: out of memory\n", __func__); -+ return; -+ } -+ -+ if (cmdline) -+ { -+ char *start = strstr(cmdline, key); -+ -+ /* Check for full word match. Match should be start of cmdline -+ * or there should be space before match -+ **/ -+ if (start && ((start == cmdline) || (*(start - 1) == ' '))) { -+ strncat(buf, cmdline, (start - cmdline)); -+ -+ /* Find the end of the keyword[=value] pair, -+ * including a single training space character, if any. -+ * Skip the found substring, mark the tail of cmdline. -+ **/ -+ end = strchr(start, ' '); -+ if (end) { -+ end++; -+ } -+ } else { -+ strcat(buf, cmdline); -+ strcat(buf, " "); -+ } -+ } -+ -+ strcat(buf, key); -+ if (value) { -+ strcat(buf, "="); -+ strcat(buf, value); -+ } -+ -+ if (end) { -+ strcat(buf, " "); -+ strcat(buf, end); -+ } -+ -+ setenv("bootargs", buf); -+ free(buf); -+} -+ - int board_late_init(void) - { - u32 val; -+ u32 reset_reason = ast_scu_sys_rest_info(); - - /* Switch PWM to GPIO mode to make FAN run in max speed */ - ast_scu_switch_pwm_to_gpio_mode(); -@@ -44,6 +113,18 @@ int board_late_init(void) - writel(0xaa, AST_SCU_BASE); - #endif - -+ if (reset_reason & SCU_SYS_EXT_RESET_FLAG) { -+ update_bootargs_cmd("resetreason", "external"); -+ } else if (reset_reason & SCU_SYS_WDT_RESET_FLAG) { -+ update_bootargs_cmd("resetreason", "watchdog"); -+ } else if (reset_reason & SCU_SYS_PWR_RESET_FLAG) { -+ update_bootargs_cmd("resetreason", "power"); -+ } else { -+ char value[32]; -+ snprintf(value, sizeof(value) - 1, "0x%x", reset_reason); -+ update_bootargs_cmd("resetreason", value); -+ } -+ - return 0; - } - #endif --- -2.25.1 - diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0004-aspeed-add-gpio-support.patch b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0004-aspeed-add-gpio-support.patch deleted file mode 100644 index 2f8ff45bd..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0004-aspeed-add-gpio-support.patch +++ /dev/null @@ -1,518 +0,0 @@ -From 7372552ae247e4870fb6dc80df7610f86d736a57 Mon Sep 17 00:00:00 2001 -From: Chanh Nguyen <chanh@os.amperecomputing.com> -Date: Tue, 9 Mar 2021 11:04:56 +0700 -Subject: [PATCH] aspeed: add gpio support - -This is an initial support for the parallel GPIO pins directly connected -to the AHB on the Aspeed 2400/2500. - -This brings the functions and a shell command to manipulate the GPIO -state. The GPIO value reading and writing work in non interrupt mode -only. - -This is back ported from the patch file from -meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0003-aspeed-add-gpio-support.patch -to support GPIO configuration - -Signed-off-by: Alexander Filippov <a.filippov@yadro.com> -Signed-off-by: Thang Q. Nguyen <thangqn@amperecomputing.com> -Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> ---- - arch/arm/include/asm/arch-aspeed/gpio.h | 65 ++++ - drivers/gpio/Makefile | 2 + - drivers/gpio/aspeed_gpio.c | 386 ++++++++++++++++++++++++ - include/configs/ast-g5-phy.h | 1 + - 4 files changed, 454 insertions(+) - create mode 100644 arch/arm/include/asm/arch-aspeed/gpio.h - create mode 100644 drivers/gpio/aspeed_gpio.c - -diff --git a/arch/arm/include/asm/arch-aspeed/gpio.h b/arch/arm/include/asm/arch-aspeed/gpio.h -new file mode 100644 -index 0000000000..c63987e917 ---- /dev/null -+++ b/arch/arm/include/asm/arch-aspeed/gpio.h -@@ -0,0 +1,65 @@ -+/* -+ * SPDX-License-Identifier: GPL-2.0+ -+ * Copyright (C) 2020 YADRO. -+ */ -+#ifndef _ASPEED_GPIO_H -+#define _ASPEED_GPIO_H -+ -+#define ASPEED_GPIO_PORT_A 0 -+#define ASPEED_GPIO_PORT_B 1 -+#define ASPEED_GPIO_PORT_C 2 -+#define ASPEED_GPIO_PORT_D 3 -+#define ASPEED_GPIO_PORT_E 4 -+#define ASPEED_GPIO_PORT_F 5 -+#define ASPEED_GPIO_PORT_G 6 -+#define ASPEED_GPIO_PORT_H 7 -+#define ASPEED_GPIO_PORT_I 8 -+#define ASPEED_GPIO_PORT_J 9 -+#define ASPEED_GPIO_PORT_K 10 -+#define ASPEED_GPIO_PORT_L 11 -+#define ASPEED_GPIO_PORT_M 12 -+#define ASPEED_GPIO_PORT_N 13 -+#define ASPEED_GPIO_PORT_O 14 -+#define ASPEED_GPIO_PORT_P 15 -+#define ASPEED_GPIO_PORT_Q 16 -+#define ASPEED_GPIO_PORT_R 17 -+#define ASPEED_GPIO_PORT_S 18 -+#define ASPEED_GPIO_PORT_T 19 -+#define ASPEED_GPIO_PORT_U 20 -+#define ASPEED_GPIO_PORT_V 21 -+#define ASPEED_GPIO_PORT_W 22 -+#define ASPEED_GPIO_PORT_X 23 -+#define ASPEED_GPIO_PORT_Y 24 -+#define ASPEED_GPIO_PORT_Z 25 -+#define ASPEED_GPIO_PORT_AA 26 -+#define ASPEED_GPIO_PORT_AB 27 -+#define ASPEED_GPIO_PORT_AC 28 -+ -+#define ASPEED_GPIO_PORT_SHIFT 3 -+#define ASPEED_GPIO_PIN_MASK 0x7 -+#define ASPEED_GPIO(port, pin) \ -+ ((ASPEED_GPIO_PORT_##port << ASPEED_GPIO_PORT_SHIFT) | \ -+ (pin & ASPEED_GPIO_PIN_MASK)) -+ -+/* Direction values */ -+#define ASPEED_GPIO_INPUT 0 -+#define ASPEED_GPIO_OUTPUT 1 -+ -+/* Trigger values */ -+#define ASPEED_GPIO_FALLING_EDGE 0 -+#define ASPEED_GPIO_RISING_EDGE 1 -+#define ASPEED_GPIO_LOW_LEVEL 2 -+#define ASPEED_GPIO_HIGH_LEVEL 3 -+#define ASPEED_GPIO_DUAL_EDGE 4 -+ -+/* Debounce values */ -+#define ASPEED_GPIO_DEBOUNCE_NONE 0 -+#define ASPEED_GPIO_DEBOUNCE_1 1 -+#define ASPEED_GPIO_DEBOUNCE_2 2 -+#define ASPEED_GPIO_DEBOUNCE_3 3 -+ -+#define gpio_status() gpio_info() -+ -+extern void gpio_info(void); -+ -+#endif /* #ifndef _ASPEED_GPIO_H */ -diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile -index 792d19186a..5f043e07ce 100644 ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -14,6 +14,8 @@ obj-$(CONFIG_DM_GPIO) += gpio-uclass.o - obj-$(CONFIG_DM_PCA953X) += pca953x_gpio.o - obj-$(CONFIG_DM_74X164) += 74x164_gpio.o - -+obj-$(CONFIG_ARCH_AST2400) += aspeed_gpio.o -+obj-$(CONFIG_ARCH_AST2500) += aspeed_gpio.o - obj-$(CONFIG_AT91_GPIO) += at91_gpio.o - obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o - obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o -diff --git a/drivers/gpio/aspeed_gpio.c b/drivers/gpio/aspeed_gpio.c -new file mode 100644 -index 0000000000..dc07f5a520 ---- /dev/null -+++ b/drivers/gpio/aspeed_gpio.c -@@ -0,0 +1,386 @@ -+/* -+ * SPDX-License-Identifier: GPL-2.0+ -+ * Copyright (C) 2020 YADRO. -+ */ -+ -+#include <common.h> -+ -+#include <asm/arch/gpio.h> -+#include <asm/arch/platform.h> -+#include <asm/io.h> -+#include <linux/ctype.h> -+ -+typedef struct _ast_gpio_regs -+{ -+ uint32_t base; /* data and direction registers */ -+ uint32_t intcfg; /* interrupt config */ -+ uint32_t debounce; /* debounce config */ -+ uint32_t cmdsrc; /* command source config */ -+ uint32_t data; /* data read register */ -+} ast_gpio_regs_t; -+ -+static ast_gpio_regs_t ast_gpio_regs[] = { -+ /* A/B/C/D */ -+ {AST_GPIO_BASE + 0x0000, AST_GPIO_BASE + 0x0008, AST_GPIO_BASE + 0x0040, -+ AST_GPIO_BASE + 0x0060, AST_GPIO_BASE + 0x00C0}, -+ /* E/F/G/H */ -+ {AST_GPIO_BASE + 0x0020, AST_GPIO_BASE + 0x0028, AST_GPIO_BASE + 0x0048, -+ AST_GPIO_BASE + 0x0068, AST_GPIO_BASE + 0x00C4}, -+ /* I/J/K/L */ -+ {AST_GPIO_BASE + 0x0070, AST_GPIO_BASE + 0x0098, AST_GPIO_BASE + 0x00B0, -+ AST_GPIO_BASE + 0x0090, AST_GPIO_BASE + 0x00C8}, -+ /* M/N/O/P */ -+ {AST_GPIO_BASE + 0x0078, AST_GPIO_BASE + 0x00E8, AST_GPIO_BASE + 0x0100, -+ AST_GPIO_BASE + 0x00E0, AST_GPIO_BASE + 0x00CC}, -+ /* Q/R/S/T */ -+ {AST_GPIO_BASE + 0x0080, AST_GPIO_BASE + 0x0118, AST_GPIO_BASE + 0x0130, -+ AST_GPIO_BASE + 0x0110, AST_GPIO_BASE + 0x00D0}, -+ /* U/V/W/X */ -+ {AST_GPIO_BASE + 0x0088, AST_GPIO_BASE + 0x0148, AST_GPIO_BASE + 0x0160, -+ AST_GPIO_BASE + 0x0140, AST_GPIO_BASE + 0x00D4}, -+ /* Y/Z/AA/AB */ -+ {AST_GPIO_BASE + 0x01E0, AST_GPIO_BASE + 0x0178, AST_GPIO_BASE + 0x0190, -+ AST_GPIO_BASE + 0x0170, AST_GPIO_BASE + 0x00D8}, -+ /* AC */ -+ {AST_GPIO_BASE + 0x01E8, AST_GPIO_BASE + 0x01A8, AST_GPIO_BASE + 0x01C0, -+ AST_GPIO_BASE + 0x01A0, AST_GPIO_BASE + 0x00DC}, -+}; -+ -+#define AST_GPIO_PINS_PER_PORT 8 -+#define AST_GPIO_PORTS_PER_REGISTER 4 -+ -+#define AST_GPIO_PORT(gpio) (gpio >> ASPEED_GPIO_PORT_SHIFT) -+#define AST_GPIO_PIN(gpio) (gpio & ASPEED_GPIO_PIN_MASK) -+#define AST_GPIO_SHIFT(gpio) \ -+ ((AST_GPIO_PORT(gpio) % AST_GPIO_PORTS_PER_REGISTER) * \ -+ AST_GPIO_PINS_PER_PORT + \ -+ AST_GPIO_PIN(gpio)) -+ -+#define AST_GPIO_REG_INDEX(gpio) \ -+ (AST_GPIO_PORT(gpio) / AST_GPIO_PORTS_PER_REGISTER) -+ -+/** -+ * @return Pointer to corresponding item from ast_gpio_regs table. -+ */ -+#define AST_GPIO_REGS(gpio) \ -+ ((AST_GPIO_REG_INDEX(gpio) < ARRAY_SIZE(ast_gpio_regs)) \ -+ ? (ast_gpio_regs + AST_GPIO_REG_INDEX(gpio)) \ -+ : NULL) -+ -+/** -+ * @brief Set a corresponding bit in specified register. -+ * -+ * @param val - Required bit value -+ * @param base - Register address -+ * @param shift - Bit index. -+ */ -+#define AST_GPIO_WRITE(val, base, shift) \ -+ writel(((val) ? readl(base) | (1 << (shift)) \ -+ : readl(base) & ~(1 << (shift))), \ -+ base) -+ -+/** -+ * @brief Get value of corresponging bit from specified register. -+ * -+ * @param base - Register address -+ * @param shift - Bit index -+ * -+ * @return Bit value -+ */ -+#define AST_GPIO_READ(base, shift) ((readl(base) >> (shift)) & 1) -+ -+#define IS_VALID_GPIO(gpio) \ -+ ((gpio) >= ASPEED_GPIO(A, 0) && (gpio) <= ASPEED_GPIO(AC, 7)) -+ -+#define AST_GPIO_DIRECTION 0x04 -+#define AST_GPIO_INT_SENS0 0x04 -+#define AST_GPIO_INT_SENS1 0x08 -+#define AST_GPIO_INT_SENS2 0x0C -+#define AST_GPIO_INT_STATUS 0x10 -+#define AST_GPIO_DEBOUNCE0 0x00 -+#define AST_GPIO_DEBOUNCE1 0x04 -+#define AST_GPIO_CMD_SRC0 0x00 -+#define AST_GPIO_CMD_SRC1 0x04 -+ -+/** -+ * @brief Set a GPIO direction -+ * -+ * @param gpio GPIO line -+ * @param direction GPIO direction (0 for input or 1 for output) -+ * -+ * @return 0 if ok, -1 on error -+ */ -+static int ast_gpio_set_direction(unsigned gpio, unsigned direction) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (!regs) -+ { -+ printf("%s: Invalid GPIO!\n", __func__); -+ return -1; -+ } -+ -+ AST_GPIO_WRITE(direction, regs->base + AST_GPIO_DIRECTION, -+ AST_GPIO_SHIFT(gpio)); -+ return 0; -+} -+ -+/** -+ * The 6 following functions are generic u-boot gpio implementation. -+ * They are declared in `include/asm-generic/gpio.h` -+ */ -+ -+int gpio_request(unsigned gpio, const char *label) -+{ -+ return (IS_VALID_GPIO(gpio) ? 0 : -1); -+} -+ -+int gpio_free(unsigned gpio) -+{ -+ return (IS_VALID_GPIO(gpio) ? 0 : -1); -+} -+ -+int gpio_get_value(unsigned gpio) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (!regs) -+ { -+ printf("%s: Invalid GPIO!\n", __func__); -+ return -1; -+ } -+ -+ return AST_GPIO_READ(regs->base, AST_GPIO_SHIFT(gpio)); -+} -+ -+int gpio_set_value(unsigned gpio, int value) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (!regs) -+ { -+ printf("%s: Invalid GPIO!\n", __func__); -+ return -1; -+ } -+ -+ AST_GPIO_WRITE(value, regs->base, AST_GPIO_SHIFT(gpio)); -+ return 0; -+} -+ -+int gpio_direction_input(unsigned gpio) -+{ -+ return ast_gpio_set_direction(gpio, ASPEED_GPIO_INPUT); -+} -+ -+int gpio_direction_output(unsigned gpio, int value) -+{ -+ int rc = ast_gpio_set_direction(gpio, ASPEED_GPIO_OUTPUT); -+ return (rc == 0 ? gpio_set_value(gpio, value) : rc); -+} -+ -+/** -+ * @brief Convert a string to GPIO line. Used by `do_gpio()` from `cmd/gpio.c` -+ * -+ * @param str a GPIO name or line number -+ * -+ * @return GPIO line if ok, -1 on error -+ */ -+int name_to_gpio(const char *str) -+{ -+ int gpio = -1; -+ -+ if (str) -+ { -+ if (isalpha(*str)) -+ { -+ gpio = (toupper(*str) - 'A') << ASPEED_GPIO_PORT_SHIFT; -+ -+ if (toupper(*str) == 'A' && toupper(*(str + 1)) >= 'A' && -+ toupper(*(str + 1)) <= 'C') -+ { -+ str++; -+ gpio = (ASPEED_GPIO_PORT_AA + toupper(*str) - 'A') -+ << ASPEED_GPIO_PORT_SHIFT; -+ } -+ -+ str++; -+ if (*str >= '0' && *str <= '7' && !*(str + 1)) -+ { -+ gpio += *str - '0'; -+ } -+ else -+ { -+ gpio = -1; -+ } -+ } -+ else if (isdigit(*str)) -+ { -+ gpio = simple_strtoul(str, NULL, 0); -+ } -+ } -+ -+ return gpio; -+} -+ -+/** -+ * @return A GPIO direction in human readable format. -+ */ -+static const char *ast_gpio_direction(unsigned gpio) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (regs) -+ { -+ int direction = AST_GPIO_READ(regs->base + AST_GPIO_DIRECTION, -+ AST_GPIO_SHIFT(gpio)); -+ switch (direction) -+ { -+ case ASPEED_GPIO_INPUT: -+ return "input"; -+ case ASPEED_GPIO_OUTPUT: -+ return "output"; -+ default: -+ break; -+ } -+ } -+ return "error"; -+} -+ -+/** -+ * @return An interrupt trigger settings in human readable format. -+ */ -+static const char *ast_gpio_trigger(unsigned gpio) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (regs) -+ { -+ unsigned shift = AST_GPIO_SHIFT(gpio); -+ unsigned trigger = -+ (AST_GPIO_READ(regs->intcfg + AST_GPIO_INT_SENS0, shift) << 0) | -+ (AST_GPIO_READ(regs->intcfg + AST_GPIO_INT_SENS1, shift) << 1) | -+ (AST_GPIO_READ(regs->intcfg + AST_GPIO_INT_SENS2, shift) << 2); -+ -+ switch (trigger) -+ { -+ case ASPEED_GPIO_FALLING_EDGE: -+ return "fall"; -+ case ASPEED_GPIO_RISING_EDGE: -+ return "rise"; -+ case ASPEED_GPIO_LOW_LEVEL: -+ return "low "; -+ case ASPEED_GPIO_HIGH_LEVEL: -+ return "high"; -+ default: -+ return "both"; -+ } -+ } -+ return "error"; -+} -+ -+/** -+ * @return An interrupt status in human readable format. -+ */ -+static const char *ast_gpio_int_status(unsigned gpio) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (regs) -+ { -+ unsigned shift = AST_GPIO_SHIFT(gpio); -+ if (AST_GPIO_READ(regs->intcfg, shift)) -+ { -+ return AST_GPIO_READ(regs->intcfg + AST_GPIO_INT_STATUS, shift) -+ ? "pending" -+ : "cleaned"; -+ } -+ return "disabled"; -+ } -+ -+ return "error"; -+} -+ -+/** -+ * @return A debounce value in human readable format. -+ */ -+static const char *ast_gpio_debounce(unsigned gpio) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (regs) -+ { -+ unsigned shift = AST_GPIO_SHIFT(gpio); -+ unsigned debounce = -+ (AST_GPIO_READ(regs->debounce + AST_GPIO_DEBOUNCE0, shift) << 0) | -+ (AST_GPIO_READ(regs->debounce + AST_GPIO_DEBOUNCE1, shift) << 1); -+ switch (debounce) -+ { -+ case ASPEED_GPIO_DEBOUNCE_NONE: -+ return "none"; -+ case ASPEED_GPIO_DEBOUNCE_1: -+ return "timer1"; -+ case ASPEED_GPIO_DEBOUNCE_2: -+ return "timer2"; -+ case ASPEED_GPIO_DEBOUNCE_3: -+ return "timer3"; -+ default: -+ break; -+ } -+ } -+ -+ return "error"; -+} -+ -+/** -+ * @return A command source value in human readable format. -+ */ -+static const char *ast_gpio_command_source(unsigned gpio) -+{ -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (regs) -+ { -+ /* Used one bit per gpio port */ -+ unsigned shift = AST_GPIO_SHIFT(gpio) - AST_GPIO_PIN(gpio); -+ unsigned cmdsrc = -+ (AST_GPIO_READ(regs->cmdsrc + AST_GPIO_CMD_SRC0, shift) << 0) | -+ (AST_GPIO_READ(regs->cmdsrc + AST_GPIO_CMD_SRC1, shift) << 1); -+ -+ switch (cmdsrc) -+ { -+ /* The single place where these values are used is here. */ -+ case 0x0: -+ return "ARM"; -+ case 0x1: -+ return "LPC"; -+ case 0x2: -+ return "CoCPU"; -+ default: -+ return "Unknown"; -+ } -+ } -+ -+ return "error"; -+} -+ -+/** -+ * @brief Show all GPIO pins statuses. Used by `do_gpio()` in `cmd/gpio.c` -+ */ -+void gpio_info(void) -+{ -+ unsigned first = ASPEED_GPIO(A, 0); -+ unsigned last = ASPEED_GPIO(AC, 7); -+ for (unsigned gpio = first; gpio <= last; gpio++) -+ { -+ unsigned port = AST_GPIO_PORT(gpio); -+ unsigned pin = AST_GPIO_PIN(gpio); -+ unsigned shift = AST_GPIO_SHIFT(gpio); -+ ast_gpio_regs_t *regs = AST_GPIO_REGS(gpio); -+ if (!regs) -+ { -+ printf("gpio %u is invalid!\n", gpio); -+ continue; -+ } -+ -+ printf("gpio %c%c%c line %3d: %s, int: %s, %s, deb: %s, src: %s, " -+ "val: %d/%d\n", -+ (port >= ASPEED_GPIO_PORT_AA ? 'A' : ' '), -+ ('A' + port % ASPEED_GPIO_PORT_AA), ('0' + pin), gpio, -+ ast_gpio_direction(gpio), ast_gpio_trigger(gpio), -+ ast_gpio_int_status(gpio), ast_gpio_debounce(gpio), -+ ast_gpio_command_source(gpio), gpio_get_value(gpio), -+ AST_GPIO_READ(regs->data, shift)); -+ } -+} -diff --git a/include/configs/ast-g5-phy.h b/include/configs/ast-g5-phy.h -index 5443a26cab..ea7c66716a 100644 ---- a/include/configs/ast-g5-phy.h -+++ b/include/configs/ast-g5-phy.h -@@ -32,5 +32,6 @@ - - /* Call board_late_init */ - #define CONFIG_BOARD_LATE_INIT 1 -+#define CONFIG_CMD_GPIO 1 /* Enable gpio command in shell */ - - #endif /* __AST_G5_PHY_CONFIG_H */ --- -2.17.1 - diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0005-aspeed-Enable-SPI-master-mode.patch b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0005-aspeed-Enable-SPI-master-mode.patch deleted file mode 100644 index 0dd736fba..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0005-aspeed-Enable-SPI-master-mode.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 0bf84de2a9db749bd61064cd47b96ef457725f54 Mon Sep 17 00:00:00 2001 -From: Chanh Nguyen <chanh@os.amperecomputing.com> -Date: Wed, 10 Mar 2021 00:02:17 +0700 -Subject: [PATCH] aspeed: Enable SPI master mode - -Currently, some systems design the strap pin, -which was shared pin with another function. -That makes the board strapping does not reflect the intended use of the system. - -This patch will enable SPI master mode by default. - -Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> ---- - board/aspeed/ast-g5/ast-g5.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/board/aspeed/ast-g5/ast-g5.c b/board/aspeed/ast-g5/ast-g5.c -index 9e27bce0f5..ed83d65136 100644 ---- a/board/aspeed/ast-g5/ast-g5.c -+++ b/board/aspeed/ast-g5/ast-g5.c -@@ -125,6 +125,9 @@ int board_late_init(void) - update_bootargs_cmd("resetreason", value); - } - -+ /* enable SPI master */ -+ ast_scu_spi_master(1); -+ - return 0; - } - #endif --- -2.17.1 - diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0006-aspeed-support-Mt.Jade-platform-init.patch b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0006-aspeed-support-Mt.Jade-platform-init.patch deleted file mode 100644 index 02a478362..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0006-aspeed-support-Mt.Jade-platform-init.patch +++ /dev/null @@ -1,175 +0,0 @@ -From 2c9ab641f2a7ea146a468ec4301c416010badff7 Mon Sep 17 00:00:00 2001 -From: Chanh Nguyen <chanh@os.amperecomputing.com> -Date: Wed, 17 Mar 2021 14:11:18 +0700 -Subject: [PATCH] aspeed: support Mt.Jade platform init - -This commit adds platform init for Mt.Jade platform. - -Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> -Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> ---- - arch/arm/include/asm/arch-aspeed/ast_scu.h | 1 + - arch/arm/include/asm/arch-aspeed/regs-scu.h | 4 ++ - arch/arm/mach-aspeed/ast-scu.c | 18 +++++ - board/aspeed/ast-g5/ast-g5.c | 76 +++++++++++++++++++++ - include/configs/ast-g5-phy.h | 3 + - 5 files changed, 102 insertions(+) - -diff --git a/arch/arm/include/asm/arch-aspeed/ast_scu.h b/arch/arm/include/asm/arch-aspeed/ast_scu.h -index f5c9126ec0..e2d06ccc1f 100644 ---- a/arch/arm/include/asm/arch-aspeed/ast_scu.h -+++ b/arch/arm/include/asm/arch-aspeed/ast_scu.h -@@ -46,5 +46,6 @@ extern void ast_scu_init_eth(u8 num); - extern void ast_scu_multi_func_eth(u8 num); - extern void ast_scu_multi_func_romcs(u8 num); - extern void ast_scu_switch_pwm_to_gpio_mode(void); -+extern void ast_scu_switch_espi_to_gpio_mode(void); - - #endif -diff --git a/arch/arm/include/asm/arch-aspeed/regs-scu.h b/arch/arm/include/asm/arch-aspeed/regs-scu.h -index b714fa9234..704ad75b4e 100644 ---- a/arch/arm/include/asm/arch-aspeed/regs-scu.h -+++ b/arch/arm/include/asm/arch-aspeed/regs-scu.h -@@ -76,6 +76,7 @@ - #define AST_SCU_FUN_PIN_CTRL7 0xA0 /* Multi-function Pin Control#7*/ - #define AST_SCU_FUN_PIN_CTRL8 0xA4 /* Multi-function Pin Control#8*/ - #define AST_SCU_FUN_PIN_CTRL9 0xA8 /* Multi-function Pin Control#9*/ -+#define AST_SCU_FUN_PIN_CTRL10 0xAC /* Multi-function Pin Control#10*/ - #define AST_SCU_MAC_CLK_DELAY_100M 0xB8 /* MAC interface clock delay 100M setting*/ - #define AST_SCU_MAC_CLK_DELAY_10M 0xBC /* MAC interface clock delay 10M setting*/ - #define AST_SCU_PWR_SAVING_EN 0xC0 /* Power Saving Wakeup Enable*/ -@@ -921,6 +922,9 @@ - #define SCU_FUN_PIN_ROMA19 (0x1 << 1) - #define SCU_FUN_PIN_ROMA18 (0x1) - -+/* AST_SCU_FUN_PIN_CTRL10 0xAC - Multi-function Pin Control#10 */ -+#define SCU_FUN_PIN_ESPI(x) (0x1 << (x)) -+ - /* AST_SCU_PWR_SAVING_EN 0xC0 - Power Saving Wakeup Enable */ - /* AST_SCU_PWR_SAVING_CTRL 0xC4 - Power Saving Wakeup Control */ - /* AST_SCU_HW_STRAP2 0xD0 - Haardware strapping register set 2 */ -diff --git a/arch/arm/mach-aspeed/ast-scu.c b/arch/arm/mach-aspeed/ast-scu.c -index c7ab66415f..71c043d3e8 100644 ---- a/arch/arm/mach-aspeed/ast-scu.c -+++ b/arch/arm/mach-aspeed/ast-scu.c -@@ -554,3 +554,21 @@ void ast_scu_get_who_init_dram(void) - break; - } - } -+ -+void ast_scu_switch_espi_to_gpio_mode(void) -+{ -+ /* -+ * This Function to set the ESPI pin to GPIO mode -+ * This allow to setting AC5_READY -+ */ -+ ast_scu_write(ast_scu_read(AST_SCU_FUN_PIN_CTRL10) & -+ ~SCU_FUN_PIN_ESPI(0) & -+ ~SCU_FUN_PIN_ESPI(1) & -+ ~SCU_FUN_PIN_ESPI(2) & -+ ~SCU_FUN_PIN_ESPI(3) & -+ ~SCU_FUN_PIN_ESPI(4) & -+ ~SCU_FUN_PIN_ESPI(5) & -+ ~SCU_FUN_PIN_ESPI(6) & -+ ~SCU_FUN_PIN_ESPI(7), -+ AST_SCU_FUN_PIN_CTRL10); -+} -diff --git a/board/aspeed/ast-g5/ast-g5.c b/board/aspeed/ast-g5/ast-g5.c -index ed83d65136..edf7f050a8 100644 ---- a/board/aspeed/ast-g5/ast-g5.c -+++ b/board/aspeed/ast-g5/ast-g5.c -@@ -163,3 +163,79 @@ void hw_watchdog_reset(void) - writel(0x4755, AST_WDT2_BASE + 0x08); - } - #endif /* CONFIG_WATCHDOG */ -+ -+#ifdef CONFIG_BOARD_EARLY_INIT_F -+int board_gpio_init(void) -+{ -+ int pgood = 0; -+ -+ /* GPIO_BMC_PSU_PG */ -+ pgood = gpio_get_value(44); -+ /* GPIO_BMC_OCP_AUX_PWREN */ -+ gpio_direction_output(139, 1); -+ -+ if (pgood) -+ { -+ /* GPIO_BMC_SYS_ATX_PSON_L */ -+ gpio_direction_output(42, 0); -+ /* GPIO_BMC_OCP_MAIN_PWREN */ -+ gpio_direction_output(140, 1); -+ } -+ else -+ { -+ /* GPIO_BMC_SYS_ATX_PSON_L */ -+ gpio_direction_output(42, 1); -+ /* GPIO_BMC_OCP_MAIN_PWREN */ -+ gpio_direction_output(140, 0); -+ } -+ -+ /* GPIOH7 GPIO_BMC_I2C6_RESET_L */ -+ gpio_direction_output(63, 1); -+ -+ /* GPIOM4 S0_I2C9_ALERT_L */ -+ gpio_direction_input(100); -+ -+ /* GPIOM5 S1_I2C9_ALERT_L */ -+ gpio_direction_input(101); -+ -+ /* GPIOQ7 GPIO_BMC_VGA_FRONT_PRES_L */ -+ gpio_direction_input(135); -+ -+ /* GPIOR1 GPIO_BMC_JTAG_SRST_L */ -+ gpio_direction_output(137, 1); -+ -+ /* BMC_GPIOR2_EXT_HIGHTEMP_L */ -+ gpio_direction_output(138, 1); -+ -+ /* GPIOS0 GPIO_S0_VRHOT_L */ -+ gpio_direction_input(144); -+ -+ /* GPIOS1 GPIO_S1_VRHOT_L */ -+ gpio_direction_input(145); -+ -+ /* GPIOS5 GPIO_BMC_VR_PMBUS_SEL_L */ -+ gpio_direction_output(149, 1); -+ -+ /* GPIOY3 BMC_VGA_SEL */ -+ gpio_direction_output(195, 1); -+ -+ /* GPIOAC1 GPIO_BMC_PCA9554_INT_L */ -+ gpio_direction_input(225); -+ -+ /* GPIO_BMC_READY */ -+ gpio_direction_output(229, 1); -+ -+ /* Enable I2C4 device access */ -+ gpio_direction_output(194, 1); -+ -+ return 0; -+} -+ -+int board_early_init_f(void) -+{ -+ ast_scu_switch_espi_to_gpio_mode(); -+ board_gpio_init(); -+ -+ return 0; -+} -+#endif /* CONFIG_BOARD_EARLY_INIT_F */ -diff --git a/include/configs/ast-g5-phy.h b/include/configs/ast-g5-phy.h -index ea7c66716a..a5e389616b 100644 ---- a/include/configs/ast-g5-phy.h -+++ b/include/configs/ast-g5-phy.h -@@ -34,4 +34,7 @@ - #define CONFIG_BOARD_LATE_INIT 1 - #define CONFIG_CMD_GPIO 1 /* Enable gpio command in shell */ - -+/* Call board_early_init_f */ -+#define CONFIG_BOARD_EARLY_INIT_F 1 -+ - #endif /* __AST_G5_PHY_CONFIG_H */ --- -2.17.1 - diff --git a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend b/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend deleted file mode 100644 index bda3d9d71..000000000 --- a/meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend +++ /dev/null @@ -1,10 +0,0 @@ -FILESEXTRAPATHS:append:mtjade := "${THISDIR}/${PN}:" - -SRC_URI += " \ - file://0001-aspeed-scu-Switch-PWM-pin-to-GPIO-input-mode.patch \ - file://0002-aspeed-Disable-internal-PD-resistors-for-GPIOs.patch \ - file://0003-aspeed-support-passing-system-reset-status-to-kernel.patch \ - file://0004-aspeed-add-gpio-support.patch \ - file://0005-aspeed-Enable-SPI-master-mode.patch \ - file://0006-aspeed-support-Mt.Jade-platform-init.patch \ - " |