diff options
author | Joel Stanley <joel@jms.id.au> | 2019-05-07 06:03:00 +0300 |
---|---|---|
committer | Brad Bishop <bradleyb@fuzziesquirrel.com> | 2019-05-09 16:39:07 +0300 |
commit | 448d27c9d6e510a027a3d05b7da945de8fa6c897 (patch) | |
tree | 05c29a6f9c6d518c16e4f392c0c0e0d1c3c98f13 /meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb | |
parent | 4377e54fb97bc70e9db45ffa3a9709b130763528 (diff) | |
download | openbmc-448d27c9d6e510a027a3d05b7da945de8fa6c897.tar.xz |
linux-aspeed: Move to v5.1
Current list of out-of-tree patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Alexander Soldatov (1):
hwmon (occ): Add temp sensor value check
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Andrew Peng (1):
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
Benjamin Fair (1):
net: npcm: use bitmap functions on link mode params
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
Eddie James (10):
ARM: dts: witherspoon: Enable vhub
media: platform: Aspeed: Remove use of reset line
media: platform: Aspeed: Make reserved memory optional
media: dt-bindings: aspeed-video: Add missing memory-region property
clk: Aspeed: Setup video engine clocking
ARM: dts: aspeed-g5: Add video engine
ARM: dts: witherspoon: Enable video engine
ARM: dts: romulus: Enable video engine
hwmon (occ): Store error condition for rate-limited polls
hwmon (occ): Prevent sysfs error attribute from returning error
Edward A. James (1):
ARM: dts: Aspeed: Witherspoon: Update BMC partitioning
Jae Hyun Yoo (19):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
media: platform: aspeed: fix a kernel warning on clk control
media: platform: aspeed: refine clock control logic
media: platform: aspeed: change irq to threaded irq
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
Joel Stanley (20):
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
ARM: config: aspeed-g5: Add video engine driver
ARM: dts: npcm: Remove use of skeleton.dtsi
dt-bindings: gpu: Add ASPEED GFX bindings document
drm: Add ASPEED GFX driver
drm: aspeed: Clean up Kconfig options
dt-bindings: rtc: Add on-chip ASPEED RTC documentation
rtc: Add ASPEED RTC driver
ARM: config: aspeed: Add P2A and EDAC drivers
ARM: config: aspeed-g5: Remove unused gadget drivers
ARM: config: aspeed-g5: Add ISL68137 and IR38064
Lei YU (2):
ARM: dts: palmetto: Fix flash_memory region
hwmon (occ): Fix extended status bits
Maxim Sloyko (3):
hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller
Patrick Venture (7):
ARM: dts: aspeed: zaius: Fix intersil compatibles
dt-bindings: misc: aspeed-p2a-ctrl: add support
drivers/misc: Add Aspeed P2A control driver
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: quanta-q71: Enable p2a node
dt-bindings: Add ir38064 as a trivial device
dt-bindings: Add isl68137 as a trivial device
Robert Lippert (2):
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
Tomer Maimon (18):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: dts: npcm7xx: Add PECI description
ARM: config: npcm7xx: Enable PECI driver
Vijay Khemka (1):
misc: aspeed-lpc-ctrl: make parameter optional
krzysztof.adamski@nokia.com (1):
pmbus: support for custom sysfs attributes
(From meta-aspeed rev: a1594746d761ae3fd57c8e8419c8129e78b6634a)
Change-Id: I83486a54d00afb6162ab1a3c9ee3a082241f109b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Diffstat (limited to 'meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb')
-rw-r--r-- | meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb b/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb index 65d2c07fc..9ecd3b65a 100644 --- a/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb +++ b/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb @@ -1,6 +1,6 @@ -KBRANCH ?= "dev-5.0" -LINUX_VERSION ?= "5.0.13" +KBRANCH ?= "dev-5.1" +LINUX_VERSION ?= "5.1" -SRCREV="8540490ed654f0c799277f843758f533d1ad7a55" +SRCREV="f869c3d0aad419af31719d2eaf6b2e42a6d68109" require linux-aspeed.inc |