diff options
author | Matt Spinler <spinler@us.ibm.com> | 2021-09-29 00:08:04 +0300 |
---|---|---|
committer | Andrew Geissler <geissonator@yahoo.com> | 2021-09-30 17:45:25 +0300 |
commit | c184a0f08fbfbf94c84578a6390d5077f922413d (patch) | |
tree | 582a03e32b16497708d9d13cdbdaab19f7cc3e25 /meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/witherspoon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_water.conf | |
parent | 59574596499bcf503efbeb74e379d86c76fca90b (diff) | |
download | openbmc-c184a0f08fbfbf94c84578a6390d5077f922413d.tar.xz |
ibm: Drop hwmon support for water cooled wspoon
There is an upcoming systemd change that doesn't handle what was being
done, which was to delay starting phosphor-hwmon from udev until the
chassis cooling type was on D-Bus.
This commit removes this method and goes down to a single hwmon config
file that only supports the air cooled system, which has 2 more fan
rotors than the water cooled one does.
This change also applies to the similar systems witherspoon-tacoma and
swift.
Resolves openbmc/phosphor-hwmon/#19.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ic4ed46a5bf310fb1fef8704dcafc0376c441f8c4
Diffstat (limited to 'meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/witherspoon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_water.conf')
-rw-r--r-- | meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/witherspoon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_water.conf | 13 |
1 files changed, 0 insertions, 13 deletions
diff --git a/meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/witherspoon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_water.conf b/meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/witherspoon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_water.conf deleted file mode 100644 index c96bfa76b..000000000 --- a/meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/witherspoon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_water.conf +++ /dev/null @@ -1,13 +0,0 @@ -LABEL_fan1 = "fan0_0" - -LABEL_fan3 = "fan2_0" - -LABEL_fan4 = "fan3_0" - -LABEL_fan5 = "fan0_1" - -LABEL_fan7 = "fan2_1" - -LABEL_fan8 = "fan3_1" - -TARGET_MODE = "RPM" |