meta-quanta: meta-runbmc-nuvoton: rename meta-olympus-nuvoton

For avoid confusing this layer only with RUNBMC module
(https://www.opencompute.org/documents/ocp-runbmc-daughterboard-card-
design-specification-v1-4-1-pdf)

The meta-runbmc-nuvoton will rename meta-olympus-nuvoton.
That means the Quanta Olympus product with RUNBMC module which based on
Nuvoton SoC.

The layer configuration will binding Olympus product hardware design.

(From meta-quanta rev: f4a8e7ae48dc788fa7e52f024578c67f164c8620)

Change-Id: I6faa1bfbb3b8f033239fea3c41e8b8ed18fc492d
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

21 files changed, 1054 insertions, 0 deletions

diff --git a/meta-quanta/meta-olympus-nuvoton/conf/bblayers.conf.sample b/meta-quanta/meta-olympus-nuvoton/conf/bblayers.conf.sample
new file mode 100644
index 000000000..a4fbed41f
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/conf/bblayers.conf.sample
@@ -0,0 +1,27 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "8"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ##OEROOT##/meta \
+  ##OEROOT##/meta-openembedded/meta-oe \
+  ##OEROOT##/meta-openembedded/meta-networking \
+  ##OEROOT##/meta-openembedded/meta-python \
+  ##OEROOT##/meta-phosphor \
+  ##OEROOT##/meta-nuvoton \
+  ##OEROOT##/meta-quanta \
+  ##OEROOT##/meta-quanta/meta-olympus-nuvoton \
+  "
+BBLAYERS_NON_REMOVABLE ?= " \
+  ##OEROOT##/meta \
+  ##OEROOT##/meta-openembedded/meta-oe \
+  ##OEROOT##/meta-openembedded/meta-networking \
+  ##OEROOT##/meta-openembedded/meta-python \
+  ##OEROOT##/meta-phosphor \
+  ##OEROOT##/meta-nuvoton \
+  ##OEROOT##/meta-quanta \
+  ##OEROOT##/meta-quanta/meta-olympus-nuvoton \
+  "
diff --git a/meta-quanta/meta-olympus-nuvoton/conf/conf-notes.txt b/meta-quanta/meta-olympus-nuvoton/conf/conf-notes.txt
new file mode 100644
index 000000000..9b3c01a55
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/conf/conf-notes.txt
@@ -0,0 +1,2 @@
+Common targets are:
+     obmc-phosphor-image
diff --git a/meta-quanta/meta-olympus-nuvoton/conf/layer.conf b/meta-quanta/meta-olympus-nuvoton/conf/layer.conf
new file mode 100644
index 000000000..5d5fdb733
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/conf/layer.conf
@@ -0,0 +1,10 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+            ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "olympus-nuvoton-layer"
+BBFILE_PATTERN_olympus-nuvoton-layer := "^${LAYERDIR}/"
+LAYERSERIES_COMPAT_olympus-nuvoton-layer = "warrior zeus"
diff --git a/meta-quanta/meta-olympus-nuvoton/conf/local.conf.sample b/meta-quanta/meta-olympus-nuvoton/conf/local.conf.sample
new file mode 100644
index 000000000..76d1a9716
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/conf/local.conf.sample
@@ -0,0 +1,17 @@
+MACHINE ??= "olympus-nuvoton"
+DISTRO ?= "openbmc-phosphor"
+PACKAGE_CLASSES ?= "package_rpm"
+SANITY_TESTED_DISTROS_append ?= " *"
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+PATCHRESOLVE = "noop"
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+CONF_VERSION = "1"
diff --git a/meta-quanta/meta-olympus-nuvoton/conf/machine/olympus-nuvoton.conf b/meta-quanta/meta-olympus-nuvoton/conf/machine/olympus-nuvoton.conf
new file mode 100644
index 000000000..c8e8257ca
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/conf/machine/olympus-nuvoton.conf
@@ -0,0 +1,26 @@
+KMACHINE = "nuvoton"
+KERNEL_DEVICETREE = "${KMACHINE}-npcm750-runbmc-olympus.dtb"
+
+require conf/machine/include/npcm7xx.inc
+require conf/machine/include/obmc-bsp-common.inc
+
+FLASH_SIZE = "32768"
+FLASH_UBOOT_OFFSET = "0"
+FLASH_KERNEL_OFFSET = "2048"
+FLASH_ROFS_OFFSET = "8192"
+FLASH_RWFS_OFFSET = "29696"
+
+UBOOT_MACHINE = "PolegRunBMC_defconfig"
+
+IMAGE_FSTYPES += " cpio.${INITRAMFS_CTYPE}.u-boot"
+IMAGE_FSTYPES += " mtd-ubi-tar"
+
+OBMC_MACHINE_FEATURES += "\
+        obmc-phosphor-fan-mgmt \
+        obmc-phosphor-chassis-mgmt \
+        obmc-phosphor-flash-mgmt \
+        obmc-host-ipmi \
+        obmc-host-state-mgmt \
+        obmc-chassis-state-mgmt \
+        obmc-bmc-state-mgmt \
+        "
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_olympus.xml b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_olympus.xml
new file mode 100644
index 000000000..58723e60e
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_olympus.xml
@@ -0,0 +1,166 @@
+<!-- SPDX-License-Identifier: GPL-2.0
+#
+# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
+#
+# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
+#--------------------------------------------------------------------------->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Bin_Ecc_Map>
+	<!-- BMC mandatory fields -->
+	<ImageProperties>
+		<BinSize>0</BinSize>         <!-- If 0 the binary size will be calculated by the tool -->
+		<PadValue>0xFF</PadValue>	<!-- Byte value to pad the empty areas, default is 0 -->
+	</ImageProperties>
+
+	<BinField>
+		<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
+			     uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
+		<name>StartTag</name>         <!-- name of field -->
+		<config>
+			<offset>0</offset>            <!-- offset in the header -->
+			<size>0x8</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content>  <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
+		<name>DestAddr</name>         <!-- name of field -->
+		<config>
+			<offset>0x140</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0xFFFD5E00</content>     <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- BootBlock or u-boot Code size -->
+		<name>CodeSize</name>         <!-- name of field -->
+		<config>
+			<offset>0x144</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='FileSize'>Poleg_bootblock.bin</content>	<!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- The BootBlock or u-boot binary file -->
+		<name>Code</name>             <!-- name of field -->
+		<config>
+			<offset>0x200</offset>        <!-- offset in the header -->
+			<size format='FileSize'>Poleg_bootblock.bin</size>                 <!-- size in the header calculated by tool-->
+		</config>
+		<content format='FileContent'>Poleg_bootblock.bin</content>  <!-- content the user should fill -->
+	</BinField>
+
+	<!-- BMC optional fields -->
+	<BinField>
+		<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
+		<name>FIU0_DRD_CFG_Set</name>  <!-- name of field -->
+		<config>
+			<offset>0x108</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x030011BB</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
+		<name>FIU_Clk_Divider</name>  <!-- name of field -->
+		<config>
+			<offset>0x10C</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>4</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Version (Major.Minor) -->
+		<name>Version</name>          <!-- name of field -->
+		<config>
+			<offset>0x148</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x0201</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
+		<name>BOARD_VENDOR</name>          <!-- name of field -->
+		<config>
+			<offset>0x124</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>100</content>                              <!--Board_manufacturer: Nuvoton-->
+	</BinField>
+	<BinField>
+		<!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
+		<!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
+		<name>BOARD_TYPE</name>          <!-- name of field -->
+		<config>
+			<offset>0x120</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x0A</content>                                   <!--Board_type: SVB-->
+	</BinField>
+
+	<!-- the next two fields are available since version 10.7.0 -->
+	<BinField>
+		<!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
+		<name>MC_FREQ_IN_MHZ</name>          <!-- name of field -->
+		<config>
+			<offset>0x128</offset>        <!-- offset in the header -->
+			<size>0x2</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>800</content>
+	</BinField>
+	<BinField>
+		<!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
+		<name>CPU_FREQ_IN_MHZ</name>          <!-- name of field -->
+		<config>
+			<offset>0x12A</offset>        <!-- offset in the header -->
+			<size>0x2</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>800</content>
+	</BinField>
+
+	<BinField>
+		<!-- MC_CONFIG.
+			Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
+			Bit 1:  MC_CAPABILITY_IGNORE_ECC_DEVICE         (0x02) -->
+		<name>MC_CONFIG</name>          <!-- name of field -->
+		<config>
+			<offset>0x12C</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x01</content>
+	</BinField>
+
+	<BinField>
+		<!-- HOST_IF.
+			0xFF: LPC backward compatible
+			0x00: LPC.
+			0x01: eSPI
+			0x02: GPIOs TRIS.  -->
+		<name>HOST_IF</name>          <!-- name of field -->
+		<config>
+			<offset>0x12D</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x00</content>
+	</BinField>
+
+	<!-- reserved fields -->
+	<BinField>
+		<!-- reserved field for sample -->
+		<name>My_reserved</name>  <!-- name of field -->
+		<config>
+			<offset>0x110</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0xFF 0xFF 0xFF 0xFF</content>  <!-- content the user should fill -->
+	</BinField>
+
+</Bin_Ecc_Map>
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/UbootHeader_olympus.xml b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/UbootHeader_olympus.xml
new file mode 100644
index 000000000..1612a8368
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/UbootHeader_olympus.xml
@@ -0,0 +1,191 @@
+<!-- SPDX-License-Identifier: GPL-2.0
+#
+# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
+#
+# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
+#--------------------------------------------------------------------------->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Bin_Ecc_Map>
+	<!-- BMC mandatory fields -->
+	<ImageProperties>
+		<BinSize>0</BinSize>         <!-- If 0 the binary size will be calculated by the tool -->
+		<PadValue>0xFF</PadValue>	<!-- Byte value to pad the empty areas, default is 0 -->
+	</ImageProperties>
+
+	<BinField>
+		<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
+			     uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
+		<name>StartTag</name>         <!-- name of field -->
+		<config>
+			<offset>0</offset>            <!-- offset in the header -->
+			<size>0x8</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B</content>  <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Code destination address, 32-bit aligned: for u-boot should be 0x80005000 so code will run in 0x80005200 as linked for -->
+		<name>DestAddr</name>         <!-- name of field -->
+		<config>
+			<offset>0x140</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x8000</content>  <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- BootBlock or u-boot Code size -->
+		<name>CodeSize</name>         <!-- name of field -->
+		<config>
+			<offset>0x144</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='FileSize'>u-boot.bin</content>	<!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- The BootBlock or u-boot binary file -->
+		<name>Code</name>             <!-- name of field -->
+		<config>
+			<offset>0x200</offset>        <!-- offset in the header -->
+			<size format='FileSize'>u-boot.bin</size>                 <!-- size in the header calculated by tool-->
+		</config>
+		<content format='FileContent'>u-boot.bin</content>  <!-- content the user should fill -->
+	</BinField>
+
+	<!-- BMC optional fields -->
+	<BinField>
+		<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
+		<name>FIU0_DRD_CFG_Set</name>  <!-- name of field -->
+		<config>
+			<offset>0x108</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x030111BC</content>               <!-- content the user should fill 0x030032EB -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
+		<name>FIU0_Clk_Divider</name>  <!-- name of field -->
+		<config>
+			<offset>0x10C</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU0 CS1 is enabled -->
+		<name>fiu0_cs1_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x10D</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU0 CS2 is enabled -->
+		<name>fiu0_cs2_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x10E</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU0 CS3 is enabled -->
+		<name>fiu0_cs3_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x10F</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<!-- BMC optional fields -->
+	<BinField>
+		<!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
+		<name>FIU3_DRD_CFG_Set</name>  <!-- name of field -->
+		<config>
+			<offset>0x110</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x030011BB</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<!-- BMC optional fields -->
+	<BinField>
+		<!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
+		<name>FIU3_DWR_CFG_Set</name>  <!-- name of field -->
+		<config>
+			<offset>0x114</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines the clock divide ratio from AHB to FIU3 clock -->
+		<name>FIU3_Clk_Divider</name>  <!-- name of field -->
+		<config>
+			<offset>0x118</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU3 CS0 is enabled -->
+		<name>fiu3_cs0_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x119</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU3 CS1 is enabled -->
+		<name>fiu3_cs1_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x11A</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU3 CS2 is enabled -->
+		<name>fiu3_cs2_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x11B</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Defines if FIU3 CS3 is enabled -->
+		<name>fiu3_cs3_en</name>  <!-- name of field -->
+		<config>
+			<offset>0x11C</offset>        <!-- offset in the header -->
+			<size>0x1</size>              <!-- size in the header -->
+		</config>
+		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
+	</BinField>
+
+	<BinField>
+		<!-- Version (Major.Minor) -->
+		<name>Version</name>          <!-- name of field -->
+		<config>
+			<offset>0x148</offset>        <!-- offset in the header -->
+			<size>0x4</size>              <!-- size in the header -->
+		</config>
+		<content format='32bit'>0x0201</content>               <!-- content the user should fill -->
+	</BinField>
+
+</Bin_Ecc_Map>
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/npcm7xx-bingo-native_%.bbappend b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/npcm7xx-bingo-native_%.bbappend
new file mode 100644
index 000000000..4de20b2da
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/npcm7xx-bingo-native_%.bbappend
@@ -0,0 +1,12 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+SRC_URI_remove = "file://BootBlockAndHeader_EB.xml"
+SRC_URI_remove = "file://UbootHeader_EB.xml"
+SRC_URI_append += " file://BootBlockAndHeader_olympus.xml"
+SRC_URI_append += " file://UbootHeader_olympus.xml"
+
+
+do_install_append() {
+	install ${WORKDIR}/BootBlockAndHeader_olympus.xml ${D}${bindir}/BootBlockAndHeader_EB.xml
+	install ${WORKDIR}/UbootHeader_olympus.xml ${D}${bindir}/UbootHeader_EB.xml
+}
+
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
new file mode 100644
index 000000000..0c384273f
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
@@ -0,0 +1,24 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+/dev/mtd2		0x0000		0x40000		0x4000
+
+# MTD SPI-dataflash example
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+#/dev/mtd5		0x4200		0x4200
+#/dev/mtd6		0x4200		0x4200
+
+# NAND example
+#/dev/mtd0		0x4000		0x4000		0x20000			2
+
+# Block device example
+#/dev/mmcblk0		0xc0000		0x20000
+
+# VFAT example
+#/boot/uboot.env	0x0000          0x4000
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
new file mode 100644
index 000000000..91518decf
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
@@ -0,0 +1,7 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += "file://fw_env.config"
+
+do_install_append () {
+	install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+}
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-kernel/linux/linux-nuvoton/olympus-nuvoton.cfg b/meta-quanta/meta-olympus-nuvoton/recipes-kernel/linux/linux-nuvoton/olympus-nuvoton.cfg
new file mode 100644
index 000000000..d970410dd
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-kernel/linux/linux-nuvoton/olympus-nuvoton.cfg
@@ -0,0 +1,77 @@
+CONFIG_HWMON=y
+CONFIG_SENSORS_TMP100=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_FAN=y
+CONFIG_SENSORS_ADC128D818=y
+CONFIG_SENSORS_ADM1275=y
+CONFIG_SENSORS_TMP102=y
+CONFIG_SENSORS_TMP421=y
+
+CONFIG_PMBUS=y
+CONFIG_SENSORS_PMBUS=y
+CONFIG_SENSORS_INA2XX=y
+CONFIG_SENSORS_TPS53679=y
+
+CONFIG_IIO=y
+CONFIG_IIO_MUX=y
+CONFIG_NPCM_ADC=y
+CONFIG_SENSORS_IIO_HWMON=y
+
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+CONFIG_OVERLAY_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_JFFS2_FS=y
+
+CONFIG_SPI=y
+CONFIG_SPI_NPCM_FIU=y
+CONFIG_MTD_M25P80=y
+CONFIG_SPI_NPCM_PSPI=y
+
+CONFIG_NET_NCSI=y
+
+CONFIG_EEPROM_AT24=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_SLAVE_EEPROM=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_MUX_MMIO=y
+CONFIG_USB_U_ETHER=y
+CONFIG_USB_F_ECM=y
+CONFIG_USB_F_EEM=y
+CONFIG_USB_F_SUBSET=y
+CONFIG_USB_F_RNDIS=y
+CONFIG_USB_F_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_HID=y
+
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_NUVOTON=y
+CONFIG_NPCM750_VCD=y
+CONFIG_NPCM750_ECE=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+
+CONFIG_USB_GADGET_NPCM_USB2=y
+
+CONFIG_PECI=y
+CONFIG_PECI_NPCM=y
+CONFIG_MFD_INTEL_PECI_CLIENT=y
+CONFIG_SENSORS_PECI_CPUTEMP=y
+CONFIG_SENSORS_PECI_DIMMTEMP=y
+CONFIG_RESET_NPCM=y
+
+CONFIG_I2C_SLAVE_MQUEUE=y
+CONFIG_NUVOTON_JTAG=y
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-kernel/linux/linux-nuvoton_%.bbappend b/meta-quanta/meta-olympus-nuvoton/recipes-kernel/linux/linux-nuvoton_%.bbappend
new file mode 100644
index 000000000..0ebbb1aae
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-kernel/linux/linux-nuvoton_%.bbappend
@@ -0,0 +1,3 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/linux-nuvoton:"
+
+SRC_URI += "file://olympus-nuvoton.cfg"
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/console/files/obmc-console.conf b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/console/files/obmc-console.conf
new file mode 100644
index 000000000..f99eaff47
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/console/files/obmc-console.conf
@@ -0,0 +1 @@
+baud = 57600
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/console/obmc-console_%.bbappend b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/console/obmc-console_%.bbappend
new file mode 100644
index 000000000..5967ce1bb
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/console/obmc-console_%.bbappend
@@ -0,0 +1,12 @@
+SUMMARY = "Nuvoton OpenBMC console daemon"
+DESCRIPTION = "Nuvoton Daemon to handle UART console connections"
+HOMEPAGE = "http://github.com/openbmc/obmc-console"
+PR = "r1"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+OBMC_CONSOLE_HOST_TTY := "ttyS2"
+
+do_build_append() {
+        install -m 0644 ${THISDIR}/files/${PN}.conf ${WORKDIR}/${PN}.conf
+}
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/config-olympus-nuvoton.json b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/config-olympus-nuvoton.json
new file mode 100644
index 000000000..5a78db6ee
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/config-olympus-nuvoton.json
@@ -0,0 +1,400 @@
+{
+    "sensors" : [
+        {
+            "name": "fan1",
+            "type": "fan",
+            "readPath": "/xyz/openbmc_project/sensors/fan_tach/fan1",
+            "writePath": "/sys/devices/platform/ahb/ahb:apb/f0103000.pwm-fan-controller/hwmon/**/pwm1",
+            "min": 0,
+            "max": 255
+        },
+        {
+            "name": "Core_0_CPU0",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_0_CPU0",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_0_CPU1",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_0_CPU1",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_1_CPU0",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_1_CPU0",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_1_CPU1",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_1_CPU1",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_2_CPU0",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_2_CPU0",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_2_CPU1",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_2_CPU1",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_3_CPU0",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_3_CPU0",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_3_CPU1",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_3_CPU1",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_4_CPU0",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_4_CPU0",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_4_CPU1",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_4_CPU1",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_5_CPU0",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_5_CPU0",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        },
+        {
+            "name": "Core_5_CPU1",
+            "type": "temp",
+            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_5_CPU1",
+            "writePath": "",
+            "min": 0,
+            "max": 0,
+            "timeout": 0
+        }
+    ],
+    "zones" : [
+        {
+            "id": 0,
+            "minThermalOutput": 0.0,
+            "failsafePercent": 100.0,
+            "pids": [
+                {
+                    "name": "fan1",
+                    "type": "fan",
+                    "inputs": ["fan1"],
+                    "setpoint": 40.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": 0.0,
+                        "integralCoeff": 0.0,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 1.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 3.0,
+                        "outLim_max": 100.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0
+                    }
+                },
+                {
+                    "name": "Core_0_CPU0",
+                    "type": "temp",
+                    "inputs": ["Core_0_CPU0"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_0_CPU1",
+                    "type": "temp",
+                    "inputs": ["Core_0_CPU1"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_1_CPU0",
+                    "type": "temp",
+                    "inputs": ["Core_1_CPU0"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_1_CPU1",
+                    "type": "temp",
+                    "inputs": ["Core_1_CPU1"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_2_CPU0",
+                    "type": "temp",
+                    "inputs": ["Core_2_CPU0"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_2_CPU1",
+                    "type": "temp",
+                    "inputs": ["Core_2_CPU1"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_3_CPU0",
+                    "type": "temp",
+                    "inputs": ["Core_3_CPU0"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_3_CPU1",
+                    "type": "temp",
+                    "inputs": ["Core_3_CPU1"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_4_CPU0",
+                    "type": "temp",
+                    "inputs": ["Core_4_CPU0"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_4_CPU1",
+                    "type": "temp",
+                    "inputs": ["Core_4_CPU1"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_5_CPU0",
+                    "type": "temp",
+                    "inputs": ["Core_5_CPU0"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                },
+                {
+                    "name": "Core_5_CPU1",
+                    "type": "temp",
+                    "inputs": ["Core_5_CPU1"],
+                    "setpoint": 30.0,
+                    "pid": {
+                        "samplePeriod": 1.0,
+                        "proportionalCoeff": -20.0,
+                        "integralCoeff": -0.1,
+                        "feedFwdOffsetCoeff": 0.0,
+                        "feedFwdGainCoeff": 0.0,
+                        "integralLimit_min": 0.0,
+                        "integralLimit_max": 0.0,
+                        "outLim_min": 0.0,
+                        "outLim_max": 16000.0,
+                        "slewNeg": 0.0,
+                        "slewPos": 0.0,
+                        "positiveHysteresis": 1.0,
+                        "negativeHysteresis": 1.0
+                    }
+                }
+            ]
+        }
+    ]
+}
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh
new file mode 100644
index 000000000..9a0d8e2e7
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh
@@ -0,0 +1,3 @@
+#!bin/bash
+
+echo 255 > /sys/class/hwmon/*/pwm1
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-reboot-control.service b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-reboot-control.service
new file mode 100644
index 000000000..3ce2e01b0
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-reboot-control.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Set Fan to Full Speed as Rebooting
+DefaultDependencies=no
+After=shutdown.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/bin/fan-full-speed.sh
+
+[Install]
+WantedBy=shutdown.target
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/phosphor-pid-control.service b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/phosphor-pid-control.service
new file mode 100644
index 000000000..57ae69c56
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/phosphor-pid-control.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=OpenBMC Fan Control Daemon
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/swampd
+Restart=always
+RestartSec=5
+StartLimitInterval=0
+ExecStopPost=/usr/bin/fan-full-speed.sh
+
+[Install]
+WantedBy=basic.target
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control_%.bbappend b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control_%.bbappend
new file mode 100644
index 000000000..a61181dcb
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control_%.bbappend
@@ -0,0 +1,29 @@
+FILESEXTRAPATHS_prepend_olympus-nuvoton := "${THISDIR}/${PN}:"
+
+SRC_URI_append_olympus-nuvoton = " file://config-olympus-nuvoton.json"
+SRC_URI_append_olympus-nuvoton = " file://fan-full-speed.sh"
+SRC_URI_append_olympus-nuvoton = " file://phosphor-pid-control.service"
+SRC_URI_append_olympus-nuvoton = " file://fan-reboot-control.service"
+
+FILES_${PN}_append_olympus-nuvoton = " ${bindir}/fan-full-speed.sh"
+FILES_${PN}_append_olympus-nuvoton = " ${datadir}/swampd/config.json"
+
+RDEPENDS_${PN} += "bash"
+
+SYSTEMD_SERVICE_${PN}_append_olympus-nuvoton = " phosphor-pid-control.service"
+SYSTEMD_SERVICE_${PN}_append_olympus-nuvoton = " fan-reboot-control.service"
+
+do_install_append_olympus-nuvoton() {
+    install -d ${D}/${bindir}
+    install -m 0755 ${WORKDIR}/fan-full-speed.sh ${D}/${bindir}
+
+    install -d ${D}${datadir}/swampd
+    install -m 0644 -D ${WORKDIR}/config-olympus-nuvoton.json \
+        ${D}${datadir}/swampd/config.json
+
+    install -d ${D}${systemd_unitdir}/system/
+    install -m 0644 ${WORKDIR}/phosphor-pid-control.service \
+        ${D}${systemd_unitdir}/system
+    install -m 0644 ${WORKDIR}/fan-reboot-control.service \
+        ${D}${systemd_unitdir}/system
+}
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb/ipmb-olympus-channels.json b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb/ipmb-olympus-channels.json
new file mode 100644
index 000000000..45100bd1d
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb/ipmb-olympus-channels.json
@@ -0,0 +1,11 @@
+{
+  "channels": [
+    {
+      "type": "me",
+      "master-path": "/dev/i2c-5",
+      "slave-path": "/sys/bus/i2c/devices/5-1010/slave-mqueue",
+      "bmc-addr": 32,
+      "remote-addr": 44
+    }
+  ]
+}
diff --git a/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend
new file mode 100644
index 000000000..6feb2be84
--- /dev/null
+++ b/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend
@@ -0,0 +1,11 @@
+FILESEXTRAPATHS_prepend_olympus-nuvoton := "${THISDIR}/${PN}:"
+
+SRC_URI_append_olympus-nuvoton = " file://ipmb-olympus-channels.json"
+FILES_${PN}_append_olympus-nuvoton = " ${datadir}/ipmbbridge/ipmb-channels.json"
+
+do_install_append_olympus-nuvoton() {
+    install -d ${D}${datadir}/ipmbbridge
+    install -m 0644 -D ${WORKDIR}/ipmb-olympus-channels.json \
+        ${D}${datadir}/ipmbbridge/ipmb-channels.json
+}
+