meta-quanta: meta-runbmc-nuvoton: rename meta-olympus-nuvoton

For avoid confusing this layer only with RUNBMC module
(https://www.opencompute.org/documents/ocp-runbmc-daughterboard-card-
design-specification-v1-4-1-pdf)

The meta-runbmc-nuvoton will rename meta-olympus-nuvoton.
That means the Quanta Olympus product with RUNBMC module which based on
Nuvoton SoC.

The layer configuration will binding Olympus product hardware design.

(From meta-quanta rev: f4a8e7ae48dc788fa7e52f024578c67f164c8620)

Change-Id: I6faa1bfbb3b8f033239fea3c41e8b8ed18fc492d
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

21 files changed, 0 insertions, 1054 deletions

diff --git a/meta-quanta/meta-runbmc-nuvoton/conf/bblayers.conf.sample b/meta-quanta/meta-runbmc-nuvoton/conf/bblayers.conf.sample
deleted file mode 100644
index 1e6f3b030..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,27 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "8"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-openembedded/meta-oe \
-  ##OEROOT##/meta-openembedded/meta-networking \
-  ##OEROOT##/meta-openembedded/meta-python \
-  ##OEROOT##/meta-phosphor \
-  ##OEROOT##/meta-nuvoton \
-  ##OEROOT##/meta-quanta \
-  ##OEROOT##/meta-quanta/meta-runbmc-nuvoton \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-openembedded/meta-oe \
-  ##OEROOT##/meta-openembedded/meta-networking \
-  ##OEROOT##/meta-openembedded/meta-python \
-  ##OEROOT##/meta-phosphor \
-  ##OEROOT##/meta-nuvoton \
-  ##OEROOT##/meta-quanta \
-  ##OEROOT##/meta-quanta/meta-runbmc-nuvoton \
-  "
diff --git a/meta-quanta/meta-runbmc-nuvoton/conf/conf-notes.txt b/meta-quanta/meta-runbmc-nuvoton/conf/conf-notes.txt
deleted file mode 100644
index 9b3c01a55..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/conf/conf-notes.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Common targets are:
-     obmc-phosphor-image
diff --git a/meta-quanta/meta-runbmc-nuvoton/conf/layer.conf b/meta-quanta/meta-runbmc-nuvoton/conf/layer.conf
deleted file mode 100644
index ccb683fe8..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/conf/layer.conf
+++ /dev/null
@@ -1,10 +0,0 @@
-# We have a conf and classes directory, add to BBPATH
-BBPATH .= ":${LAYERDIR}"
-
-# We have recipes-* directories, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
-            ${LAYERDIR}/recipes-*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "runbmc-nuvoton-layer"
-BBFILE_PATTERN_runbmc-nuvoton-layer := "^${LAYERDIR}/"
-LAYERSERIES_COMPAT_runbmc-nuvoton-layer = "warrior zeus"
diff --git a/meta-quanta/meta-runbmc-nuvoton/conf/local.conf.sample b/meta-quanta/meta-runbmc-nuvoton/conf/local.conf.sample
deleted file mode 100644
index 37ae2b3a8..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/conf/local.conf.sample
+++ /dev/null
@@ -1,17 +0,0 @@
-MACHINE ??= "runbmc-nuvoton"
-DISTRO ?= "openbmc-phosphor"
-PACKAGE_CLASSES ?= "package_rpm"
-SANITY_TESTED_DISTROS_append ?= " *"
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-PATCHRESOLVE = "noop"
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    STOPTASKS,/tmp,100M,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K \
-    ABORT,/tmp,10M,1K"
-CONF_VERSION = "1"
diff --git a/meta-quanta/meta-runbmc-nuvoton/conf/machine/runbmc-nuvoton.conf b/meta-quanta/meta-runbmc-nuvoton/conf/machine/runbmc-nuvoton.conf
deleted file mode 100644
index c8e8257ca..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/conf/machine/runbmc-nuvoton.conf
+++ /dev/null
@@ -1,26 +0,0 @@
-KMACHINE = "nuvoton"
-KERNEL_DEVICETREE = "${KMACHINE}-npcm750-runbmc-olympus.dtb"
-
-require conf/machine/include/npcm7xx.inc
-require conf/machine/include/obmc-bsp-common.inc
-
-FLASH_SIZE = "32768"
-FLASH_UBOOT_OFFSET = "0"
-FLASH_KERNEL_OFFSET = "2048"
-FLASH_ROFS_OFFSET = "8192"
-FLASH_RWFS_OFFSET = "29696"
-
-UBOOT_MACHINE = "PolegRunBMC_defconfig"
-
-IMAGE_FSTYPES += " cpio.${INITRAMFS_CTYPE}.u-boot"
-IMAGE_FSTYPES += " mtd-ubi-tar"
-
-OBMC_MACHINE_FEATURES += "\
-        obmc-phosphor-fan-mgmt \
-        obmc-phosphor-chassis-mgmt \
-        obmc-phosphor-flash-mgmt \
-        obmc-host-ipmi \
-        obmc-host-state-mgmt \
-        obmc-chassis-state-mgmt \
-        obmc-bmc-state-mgmt \
-        "
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_RunBMC.xml b/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_RunBMC.xml
deleted file mode 100644
index 58723e60e..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_RunBMC.xml
+++ /dev/null
@@ -1,166 +0,0 @@
-<!-- SPDX-License-Identifier: GPL-2.0
-#
-# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
-#
-# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
-#--------------------------------------------------------------------------->
-
-<?xml version="1.0" encoding="UTF-8"?>
-
-<Bin_Ecc_Map>
-	<!-- BMC mandatory fields -->
-	<ImageProperties>
-		<BinSize>0</BinSize>         <!-- If 0 the binary size will be calculated by the tool -->
-		<PadValue>0xFF</PadValue>	<!-- Byte value to pad the empty areas, default is 0 -->
-	</ImageProperties>
-
-	<BinField>
-		<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
-			     uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
-		<name>StartTag</name>         <!-- name of field -->
-		<config>
-			<offset>0</offset>            <!-- offset in the header -->
-			<size>0x8</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content>  <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
-		<name>DestAddr</name>         <!-- name of field -->
-		<config>
-			<offset>0x140</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0xFFFD5E00</content>     <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- BootBlock or u-boot Code size -->
-		<name>CodeSize</name>         <!-- name of field -->
-		<config>
-			<offset>0x144</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='FileSize'>Poleg_bootblock.bin</content>	<!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- The BootBlock or u-boot binary file -->
-		<name>Code</name>             <!-- name of field -->
-		<config>
-			<offset>0x200</offset>        <!-- offset in the header -->
-			<size format='FileSize'>Poleg_bootblock.bin</size>                 <!-- size in the header calculated by tool-->
-		</config>
-		<content format='FileContent'>Poleg_bootblock.bin</content>  <!-- content the user should fill -->
-	</BinField>
-
-	<!-- BMC optional fields -->
-	<BinField>
-		<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
-		<name>FIU0_DRD_CFG_Set</name>  <!-- name of field -->
-		<config>
-			<offset>0x108</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x030011BB</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
-		<name>FIU_Clk_Divider</name>  <!-- name of field -->
-		<config>
-			<offset>0x10C</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>4</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Version (Major.Minor) -->
-		<name>Version</name>          <!-- name of field -->
-		<config>
-			<offset>0x148</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x0201</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
-		<name>BOARD_VENDOR</name>          <!-- name of field -->
-		<config>
-			<offset>0x124</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>100</content>                              <!--Board_manufacturer: Nuvoton-->
-	</BinField>
-	<BinField>
-		<!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
-		<!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
-		<name>BOARD_TYPE</name>          <!-- name of field -->
-		<config>
-			<offset>0x120</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x0A</content>                                   <!--Board_type: SVB-->
-	</BinField>
-
-	<!-- the next two fields are available since version 10.7.0 -->
-	<BinField>
-		<!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
-		<name>MC_FREQ_IN_MHZ</name>          <!-- name of field -->
-		<config>
-			<offset>0x128</offset>        <!-- offset in the header -->
-			<size>0x2</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>800</content>
-	</BinField>
-	<BinField>
-		<!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
-		<name>CPU_FREQ_IN_MHZ</name>          <!-- name of field -->
-		<config>
-			<offset>0x12A</offset>        <!-- offset in the header -->
-			<size>0x2</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>800</content>
-	</BinField>
-
-	<BinField>
-		<!-- MC_CONFIG.
-			Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
-			Bit 1:  MC_CAPABILITY_IGNORE_ECC_DEVICE         (0x02) -->
-		<name>MC_CONFIG</name>          <!-- name of field -->
-		<config>
-			<offset>0x12C</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x01</content>
-	</BinField>
-
-	<BinField>
-		<!-- HOST_IF.
-			0xFF: LPC backward compatible
-			0x00: LPC.
-			0x01: eSPI
-			0x02: GPIOs TRIS.  -->
-		<name>HOST_IF</name>          <!-- name of field -->
-		<config>
-			<offset>0x12D</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x00</content>
-	</BinField>
-
-	<!-- reserved fields -->
-	<BinField>
-		<!-- reserved field for sample -->
-		<name>My_reserved</name>  <!-- name of field -->
-		<config>
-			<offset>0x110</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0xFF 0xFF 0xFF 0xFF</content>  <!-- content the user should fill -->
-	</BinField>
-
-</Bin_Ecc_Map>
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/files/UbootHeader_RunBMC.xml b/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/files/UbootHeader_RunBMC.xml
deleted file mode 100644
index 1612a8368..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/files/UbootHeader_RunBMC.xml
+++ /dev/null
@@ -1,191 +0,0 @@
-<!-- SPDX-License-Identifier: GPL-2.0
-#
-# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
-#
-# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
-#--------------------------------------------------------------------------->
-
-<?xml version="1.0" encoding="UTF-8"?>
-
-<Bin_Ecc_Map>
-	<!-- BMC mandatory fields -->
-	<ImageProperties>
-		<BinSize>0</BinSize>         <!-- If 0 the binary size will be calculated by the tool -->
-		<PadValue>0xFF</PadValue>	<!-- Byte value to pad the empty areas, default is 0 -->
-	</ImageProperties>
-
-	<BinField>
-		<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
-			     uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
-		<name>StartTag</name>         <!-- name of field -->
-		<config>
-			<offset>0</offset>            <!-- offset in the header -->
-			<size>0x8</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B</content>  <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Code destination address, 32-bit aligned: for u-boot should be 0x80005000 so code will run in 0x80005200 as linked for -->
-		<name>DestAddr</name>         <!-- name of field -->
-		<config>
-			<offset>0x140</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x8000</content>  <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- BootBlock or u-boot Code size -->
-		<name>CodeSize</name>         <!-- name of field -->
-		<config>
-			<offset>0x144</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='FileSize'>u-boot.bin</content>	<!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- The BootBlock or u-boot binary file -->
-		<name>Code</name>             <!-- name of field -->
-		<config>
-			<offset>0x200</offset>        <!-- offset in the header -->
-			<size format='FileSize'>u-boot.bin</size>                 <!-- size in the header calculated by tool-->
-		</config>
-		<content format='FileContent'>u-boot.bin</content>  <!-- content the user should fill -->
-	</BinField>
-
-	<!-- BMC optional fields -->
-	<BinField>
-		<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
-		<name>FIU0_DRD_CFG_Set</name>  <!-- name of field -->
-		<config>
-			<offset>0x108</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x030111BC</content>               <!-- content the user should fill 0x030032EB -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
-		<name>FIU0_Clk_Divider</name>  <!-- name of field -->
-		<config>
-			<offset>0x10C</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU0 CS1 is enabled -->
-		<name>fiu0_cs1_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x10D</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU0 CS2 is enabled -->
-		<name>fiu0_cs2_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x10E</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU0 CS3 is enabled -->
-		<name>fiu0_cs3_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x10F</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<!-- BMC optional fields -->
-	<BinField>
-		<!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
-		<name>FIU3_DRD_CFG_Set</name>  <!-- name of field -->
-		<config>
-			<offset>0x110</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x030011BB</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<!-- BMC optional fields -->
-	<BinField>
-		<!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
-		<name>FIU3_DWR_CFG_Set</name>  <!-- name of field -->
-		<config>
-			<offset>0x114</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines the clock divide ratio from AHB to FIU3 clock -->
-		<name>FIU3_Clk_Divider</name>  <!-- name of field -->
-		<config>
-			<offset>0x118</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU3 CS0 is enabled -->
-		<name>fiu3_cs0_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x119</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU3 CS1 is enabled -->
-		<name>fiu3_cs1_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x11A</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU3 CS2 is enabled -->
-		<name>fiu3_cs2_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x11B</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Defines if FIU3 CS3 is enabled -->
-		<name>fiu3_cs3_en</name>  <!-- name of field -->
-		<config>
-			<offset>0x11C</offset>        <!-- offset in the header -->
-			<size>0x1</size>              <!-- size in the header -->
-		</config>
-		<content format='bytes'>0x0</content>               <!-- content the user should fill -->
-	</BinField>
-
-	<BinField>
-		<!-- Version (Major.Minor) -->
-		<name>Version</name>          <!-- name of field -->
-		<config>
-			<offset>0x148</offset>        <!-- offset in the header -->
-			<size>0x4</size>              <!-- size in the header -->
-		</config>
-		<content format='32bit'>0x0201</content>               <!-- content the user should fill -->
-	</BinField>
-
-</Bin_Ecc_Map>
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/npcm7xx-bingo-native_%.bbappend b/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/npcm7xx-bingo-native_%.bbappend
deleted file mode 100644
index 664fcb01d..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/images/npcm7xx-bingo-native_%.bbappend
+++ /dev/null
@@ -1,12 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-SRC_URI_remove = "file://BootBlockAndHeader_EB.xml"
-SRC_URI_remove = "file://UbootHeader_EB.xml"
-SRC_URI += " file://BootBlockAndHeader_RunBMC.xml"
-SRC_URI += " file://UbootHeader_RunBMC.xml"
-
-
-do_install_append() {
-	install ${WORKDIR}/BootBlockAndHeader_RunBMC.xml ${D}${bindir}/BootBlockAndHeader_EB.xml
-	install ${WORKDIR}/UbootHeader_RunBMC.xml ${D}${bindir}/UbootHeader_EB.xml
-}
-
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config b/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
deleted file mode 100644
index 0c384273f..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
+++ /dev/null
@@ -1,24 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
-# Futhermore, if the Flash sector size is ommitted, this value is assumed to
-# be the same as the Environment size, which is valid for NOR and SPI-dataflash
-
-# NOR example
-# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
-/dev/mtd2		0x0000		0x40000		0x4000
-
-# MTD SPI-dataflash example
-# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
-#/dev/mtd5		0x4200		0x4200
-#/dev/mtd6		0x4200		0x4200
-
-# NAND example
-#/dev/mtd0		0x4000		0x4000		0x20000			2
-
-# Block device example
-#/dev/mmcblk0		0xc0000		0x20000
-
-# VFAT example
-#/boot/uboot.env	0x0000          0x4000
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend b/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
deleted file mode 100644
index 91518decf..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
+++ /dev/null
@@ -1,7 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-SRC_URI += "file://fw_env.config"
-
-do_install_append () {
-	install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
-}
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-kernel/linux/linux-nuvoton/runbmc-nuvoton.cfg b/meta-quanta/meta-runbmc-nuvoton/recipes-kernel/linux/linux-nuvoton/runbmc-nuvoton.cfg
deleted file mode 100644
index d970410dd..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-kernel/linux/linux-nuvoton/runbmc-nuvoton.cfg
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_HWMON=y
-CONFIG_SENSORS_TMP100=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SENSORS_FAN=y
-CONFIG_SENSORS_ADC128D818=y
-CONFIG_SENSORS_ADM1275=y
-CONFIG_SENSORS_TMP102=y
-CONFIG_SENSORS_TMP421=y
-
-CONFIG_PMBUS=y
-CONFIG_SENSORS_PMBUS=y
-CONFIG_SENSORS_INA2XX=y
-CONFIG_SENSORS_TPS53679=y
-
-CONFIG_IIO=y
-CONFIG_IIO_MUX=y
-CONFIG_NPCM_ADC=y
-CONFIG_SENSORS_IIO_HWMON=y
-
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-CONFIG_OVERLAY_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_JFFS2_FS=y
-
-CONFIG_SPI=y
-CONFIG_SPI_NPCM_FIU=y
-CONFIG_MTD_M25P80=y
-CONFIG_SPI_NPCM_PSPI=y
-
-CONFIG_NET_NCSI=y
-
-CONFIG_EEPROM_AT24=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_SLAVE_EEPROM=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_MUX_MMIO=y
-CONFIG_USB_U_ETHER=y
-CONFIG_USB_F_ECM=y
-CONFIG_USB_F_EEM=y
-CONFIG_USB_F_SUBSET=y
-CONFIG_USB_F_RNDIS=y
-CONFIG_USB_F_MASS_STORAGE=y
-CONFIG_USB_CONFIGFS=y
-CONFIG_USB_CONFIGFS_ECM=y
-CONFIG_USB_CONFIGFS_ECM_SUBSET=y
-CONFIG_USB_CONFIGFS_RNDIS=y
-CONFIG_USB_CONFIGFS_EEM=y
-CONFIG_USB_CONFIGFS_MASS_STORAGE=y
-CONFIG_USB_CONFIGFS_F_HID=y
-
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_NUVOTON=y
-CONFIG_NPCM750_VCD=y
-CONFIG_NPCM750_ECE=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-
-CONFIG_USB_GADGET_NPCM_USB2=y
-
-CONFIG_PECI=y
-CONFIG_PECI_NPCM=y
-CONFIG_MFD_INTEL_PECI_CLIENT=y
-CONFIG_SENSORS_PECI_CPUTEMP=y
-CONFIG_SENSORS_PECI_DIMMTEMP=y
-CONFIG_RESET_NPCM=y
-
-CONFIG_I2C_SLAVE_MQUEUE=y
-CONFIG_NUVOTON_JTAG=y
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-kernel/linux/linux-nuvoton_%.bbappend b/meta-quanta/meta-runbmc-nuvoton/recipes-kernel/linux/linux-nuvoton_%.bbappend
deleted file mode 100644
index de375ce24..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-kernel/linux/linux-nuvoton_%.bbappend
+++ /dev/null
@@ -1,3 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/linux-nuvoton:"
-
-SRC_URI += "file://runbmc-nuvoton.cfg"
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/console/files/obmc-console.conf b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/console/files/obmc-console.conf
deleted file mode 100644
index f99eaff47..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/console/files/obmc-console.conf
+++ /dev/null
@@ -1 +0,0 @@
-baud = 57600
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/console/obmc-console_%.bbappend b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/console/obmc-console_%.bbappend
deleted file mode 100644
index 5967ce1bb..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/console/obmc-console_%.bbappend
+++ /dev/null
@@ -1,12 +0,0 @@
-SUMMARY = "Nuvoton OpenBMC console daemon"
-DESCRIPTION = "Nuvoton Daemon to handle UART console connections"
-HOMEPAGE = "http://github.com/openbmc/obmc-console"
-PR = "r1"
-
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-
-OBMC_CONSOLE_HOST_TTY := "ttyS2"
-
-do_build_append() {
-        install -m 0644 ${THISDIR}/files/${PN}.conf ${WORKDIR}/${PN}.conf
-}
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/config-runbmc-nuvoton.json b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/config-runbmc-nuvoton.json
deleted file mode 100644
index 5a78db6ee..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/config-runbmc-nuvoton.json
+++ /dev/null
@@ -1,400 +0,0 @@
-{
-    "sensors" : [
-        {
-            "name": "fan1",
-            "type": "fan",
-            "readPath": "/xyz/openbmc_project/sensors/fan_tach/fan1",
-            "writePath": "/sys/devices/platform/ahb/ahb:apb/f0103000.pwm-fan-controller/hwmon/**/pwm1",
-            "min": 0,
-            "max": 255
-        },
-        {
-            "name": "Core_0_CPU0",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_0_CPU0",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_0_CPU1",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_0_CPU1",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_1_CPU0",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_1_CPU0",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_1_CPU1",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_1_CPU1",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_2_CPU0",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_2_CPU0",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_2_CPU1",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_2_CPU1",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_3_CPU0",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_3_CPU0",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_3_CPU1",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_3_CPU1",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_4_CPU0",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_4_CPU0",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_4_CPU1",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_4_CPU1",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_5_CPU0",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_5_CPU0",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        },
-        {
-            "name": "Core_5_CPU1",
-            "type": "temp",
-            "readPath": "/xyz/openbmc_project/sensors/temperature/Core_5_CPU1",
-            "writePath": "",
-            "min": 0,
-            "max": 0,
-            "timeout": 0
-        }
-    ],
-    "zones" : [
-        {
-            "id": 0,
-            "minThermalOutput": 0.0,
-            "failsafePercent": 100.0,
-            "pids": [
-                {
-                    "name": "fan1",
-                    "type": "fan",
-                    "inputs": ["fan1"],
-                    "setpoint": 40.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": 0.0,
-                        "integralCoeff": 0.0,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 1.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 3.0,
-                        "outLim_max": 100.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0
-                    }
-                },
-                {
-                    "name": "Core_0_CPU0",
-                    "type": "temp",
-                    "inputs": ["Core_0_CPU0"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_0_CPU1",
-                    "type": "temp",
-                    "inputs": ["Core_0_CPU1"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_1_CPU0",
-                    "type": "temp",
-                    "inputs": ["Core_1_CPU0"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_1_CPU1",
-                    "type": "temp",
-                    "inputs": ["Core_1_CPU1"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_2_CPU0",
-                    "type": "temp",
-                    "inputs": ["Core_2_CPU0"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_2_CPU1",
-                    "type": "temp",
-                    "inputs": ["Core_2_CPU1"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_3_CPU0",
-                    "type": "temp",
-                    "inputs": ["Core_3_CPU0"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_3_CPU1",
-                    "type": "temp",
-                    "inputs": ["Core_3_CPU1"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_4_CPU0",
-                    "type": "temp",
-                    "inputs": ["Core_4_CPU0"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_4_CPU1",
-                    "type": "temp",
-                    "inputs": ["Core_4_CPU1"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_5_CPU0",
-                    "type": "temp",
-                    "inputs": ["Core_5_CPU0"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                },
-                {
-                    "name": "Core_5_CPU1",
-                    "type": "temp",
-                    "inputs": ["Core_5_CPU1"],
-                    "setpoint": 30.0,
-                    "pid": {
-                        "samplePeriod": 1.0,
-                        "proportionalCoeff": -20.0,
-                        "integralCoeff": -0.1,
-                        "feedFwdOffsetCoeff": 0.0,
-                        "feedFwdGainCoeff": 0.0,
-                        "integralLimit_min": 0.0,
-                        "integralLimit_max": 0.0,
-                        "outLim_min": 0.0,
-                        "outLim_max": 16000.0,
-                        "slewNeg": 0.0,
-                        "slewPos": 0.0,
-                        "positiveHysteresis": 1.0,
-                        "negativeHysteresis": 1.0
-                    }
-                }
-            ]
-        }
-    ]
-}
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh
deleted file mode 100644
index 9a0d8e2e7..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!bin/bash
-
-echo 255 > /sys/class/hwmon/*/pwm1
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-reboot-control.service b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-reboot-control.service
deleted file mode 100644
index 3ce2e01b0..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-reboot-control.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Set Fan to Full Speed as Rebooting
-DefaultDependencies=no
-After=shutdown.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=true
-ExecStart=/usr/bin/fan-full-speed.sh
-
-[Install]
-WantedBy=shutdown.target
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/phosphor-pid-control.service b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/phosphor-pid-control.service
deleted file mode 100644
index 57ae69c56..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control/phosphor-pid-control.service
+++ /dev/null
@@ -1,13 +0,0 @@
-[Unit]
-Description=OpenBMC Fan Control Daemon
-
-[Service]
-Type=simple
-ExecStart=/usr/bin/swampd
-Restart=always
-RestartSec=5
-StartLimitInterval=0
-ExecStopPost=/usr/bin/fan-full-speed.sh
-
-[Install]
-WantedBy=basic.target
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control_%.bbappend b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control_%.bbappend
deleted file mode 100644
index 5d7e0f977..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/fans/phosphor-pid-control_%.bbappend
+++ /dev/null
@@ -1,29 +0,0 @@
-FILESEXTRAPATHS_prepend_runbmc-nuvoton := "${THISDIR}/${PN}:"
-
-SRC_URI_append_runbmc-nuvoton = " file://config-runbmc-nuvoton.json"
-SRC_URI_append_runbmc-nuvoton = " file://fan-full-speed.sh"
-SRC_URI_append_runbmc-nuvoton = " file://phosphor-pid-control.service"
-SRC_URI_append_runbmc-nuvoton = " file://fan-reboot-control.service"
-
-FILES_${PN}_append_runbmc-nuvoton = " ${bindir}/fan-full-speed.sh"
-FILES_${PN}_append_runbmc-nuvoton = " ${datadir}/swampd/config.json"
-
-RDEPENDS_${PN} += "bash"
-
-SYSTEMD_SERVICE_${PN}_append_runbmc-nuvoton = " phosphor-pid-control.service"
-SYSTEMD_SERVICE_${PN}_append_runbmc-nuvoton = " fan-reboot-control.service"
-
-do_install_append_runbmc-nuvoton() {
-    install -d ${D}/${bindir}
-    install -m 0755 ${WORKDIR}/fan-full-speed.sh ${D}/${bindir}
-
-    install -d ${D}${datadir}/swampd
-    install -m 0644 -D ${WORKDIR}/config-runbmc-nuvoton.json \
-        ${D}${datadir}/swampd/config.json
-
-    install -d ${D}${systemd_unitdir}/system/
-    install -m 0644 ${WORKDIR}/phosphor-pid-control.service \
-        ${D}${systemd_unitdir}/system
-    install -m 0644 ${WORKDIR}/fan-reboot-control.service \
-        ${D}${systemd_unitdir}/system
-}
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb/ipmb-runbmc-channels.json b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb/ipmb-runbmc-channels.json
deleted file mode 100644
index 45100bd1d..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb/ipmb-runbmc-channels.json
+++ /dev/null
@@ -1,11 +0,0 @@
-{
-  "channels": [
-    {
-      "type": "me",
-      "master-path": "/dev/i2c-5",
-      "slave-path": "/sys/bus/i2c/devices/5-1010/slave-mqueue",
-      "bmc-addr": 32,
-      "remote-addr": 44
-    }
-  ]
-}
diff --git a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend b/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend
deleted file mode 100644
index ef0838e10..000000000
--- a/meta-quanta/meta-runbmc-nuvoton/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend
+++ /dev/null
@@ -1,11 +0,0 @@
-FILESEXTRAPATHS_prepend_runbmc-nuvoton := "${THISDIR}/${PN}:"
-
-SRC_URI_append_runbmc-nuvoton = " file://ipmb-runbmc-channels.json"
-FILES_${PN}_append_runbmc-nuvoton = " ${datadir}/ipmbbridge/ipmb-channels.json"
-
-do_install_append_runbmc-nuvoton() {
-    install -d ${D}${datadir}/ipmbbridge
-    install -m 0644 -D ${WORKDIR}/ipmb-runbmc-channels.json \
-        ${D}${datadir}/ipmbbridge/ipmb-channels.json
-}
-