diff options
author | Andrew Geissler <geissonator@yahoo.com> | 2020-09-18 21:33:52 +0300 |
---|---|---|
committer | Andrew Geissler <geissonator@yahoo.com> | 2020-09-18 21:33:55 +0300 |
commit | 19b4e6c6daefcbe72afe57874d2e48c43c418321 (patch) | |
tree | c28547b423cc216d1e511aa900c607a8b326a369 /meta-raspberrypi/docs/extra-build-config.md | |
parent | 214089240f2991c47237e9381f0078594998e744 (diff) | |
download | openbmc-19b4e6c6daefcbe72afe57874d2e48c43c418321.tar.xz |
meta-raspberrypi: subtree update:cc6074c660..0e9c32c816
Andrzej Bednarski (1):
docs: Correct minor spelling issues
Khem Raj (6):
linux-raspberrypi: Update to 5.4.59
raspberrypi-firmware: Upgrade to 20200819
xserver-xorg: Depend on userland when vc4graphics is disabled
libsdl2: Add userland dependency when not using vc4graphics
linux-raspberrypi_5.4.bb: Build ashmem and binder drivers
README: Mention Yoe distro in supported distro list
Luis Alfredo da Silva (1):
Revert "mesa: querying dma_buf modifiers for specific formats"
Martin Jansa (5):
linux-raspberrypi-5.4: backport a fix for perf build with -fno-common from gcc-10
rpi-gpio: add -fcommon temporarily
linux-raspberrypi-5.4: revert 1 commit from upstream to fix lttng-modules build
raspberrypi-{firmware,tools}: set downloadfilename
Revert "linux-raspberrypi-5.4: revert 1 commit from upstream to fix lttng-modules build"
Pierre-Jean Texier (2):
raspberrypi-firmware: update to current HEAD
linux-raspberrypi: bump to Linux version 5.4.64
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I5acc97c6612dd01922b1577537e555220f3b77e6
Diffstat (limited to 'meta-raspberrypi/docs/extra-build-config.md')
-rw-r--r-- | meta-raspberrypi/docs/extra-build-config.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/meta-raspberrypi/docs/extra-build-config.md b/meta-raspberrypi/docs/extra-build-config.md index b8813222c..84601848e 100644 --- a/meta-raspberrypi/docs/extra-build-config.md +++ b/meta-raspberrypi/docs/extra-build-config.md @@ -1,6 +1,6 @@ # Optional build configuration -There are a set of ways in which a user can influence different paramenters of +There are a set of ways in which a user can influence different parameters of the build. We list here the ones that are closely related to this BSP or specific to it. For the rest please check: <http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html> @@ -37,7 +37,7 @@ By default, each machine uses `vc4` for graphics. This will in turn sets mesa as ## Add purchased license codecs -To add you own licenses use variables `KEY_DECODE_MPG2` and `KEY_DECODE_WVC1` in +To add your own licenses use variables `KEY_DECODE_MPG2` and `KEY_DECODE_WVC1` in local.conf. Example: KEY_DECODE_MPG2 = "12345678" @@ -77,7 +77,7 @@ To remove (or adjust) this delay set these variables in local.conf: ## Set overclocking options The Raspberry Pi can be overclocked. As of now overclocking up to the "Turbo -Mode" is officially supported by the raspbery and does not void warranty. Check +Mode" is officially supported by the Raspberry Pi and does not void warranty. Check the config.txt for a detailed description of options and modes. The following variables are supported in local.conf: `ARM_FREQ`, `GPU_FREQ`, `CORE_FREQ`, `SDRAM_FREQ` and `OVER_VOLTAGE`. @@ -249,7 +249,7 @@ Screen LCD, HDMI interface (<http://www.waveshare.com/7inch-HDMI-LCD-C.htm>) Rev RaspberryPi 0, 1, 2 and CM will have UART console enabled by default. RaspberryPi 0 WiFi and 3 does not have the UART enabled by default because this -needs a fixed core frequency and enable_uart wil set it to the minimum. Certain +needs a fixed core frequency and enable_uart will set it to the minimum. Certain operations - 60fps h264 decode, high quality deinterlace - which aren't performed on the ARM may be affected, and we wouldn't want to do that to users who don't want to use the serial port. Users who want serial console support on |