diff options
author | jmbills <jason.m.bills@intel.com> | 2021-08-03 01:45:08 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-08-03 01:45:08 +0300 |
commit | 10ad77d5bc86709d8ff7f95e7040e39f1c153903 (patch) | |
tree | 307cedb87f4c0a329740c55ac364ed489d1d8fc2 /poky/documentation/ref-manual/variables.rst | |
parent | c6b1c6ba7a01b7987d65d61c262c44c320193108 (diff) | |
parent | 67327ddc580cb9a85219a534844832a1682780d4 (diff) | |
download | openbmc-10ad77d5bc86709d8ff7f95e7040e39f1c153903.tar.xz |
Update
Diffstat (limited to 'poky/documentation/ref-manual/variables.rst')
-rw-r--r-- | poky/documentation/ref-manual/variables.rst | 2174 |
1 files changed, 989 insertions, 1185 deletions
diff --git a/poky/documentation/ref-manual/variables.rst b/poky/documentation/ref-manual/variables.rst index 74ac12bf9..71c2e11d9 100644 --- a/poky/documentation/ref-manual/variables.rst +++ b/poky/documentation/ref-manual/variables.rst @@ -24,8 +24,7 @@ system and gives an overview of their function and contents. ABI extensions are set in the machine include files. For example, the ``meta/conf/machine/include/arm/arch-arm.inc`` file sets the - following extension: - :: + following extension:: ABIEXTENSION = "eabi" @@ -37,8 +36,7 @@ system and gives an overview of their function and contents. requirement on the existence of the package. Like all package-controlling variables, you must always use them in - conjunction with a package name override, as in: - :: + conjunction with a package name override, as in:: ALLOW_EMPTY_${PN} = "1" ALLOW_EMPTY_${PN}-dev = "1" @@ -51,11 +49,9 @@ system and gives an overview of their function and contents. alternatives system to create a different binary naming scheme so the commands can co-exist. - To use the variable, list out the package's commands that also exist - as part of another package. For example, if the ``busybox`` package - has four commands that also exist as part of another package, you - identify them as follows: - :: + To use the variable, list out the package's commands that are also + provided by another package. For example, if the ``busybox`` package + has four such commands, you identify them as follows:: ALTERNATIVE_busybox = "sh sed test bracket" @@ -67,9 +63,8 @@ system and gives an overview of their function and contents. Used by the alternatives system to map duplicated commands to actual locations. For example, if the ``bracket`` command provided by the ``busybox`` package is duplicated through another package, you must - use the ``ALTERNATIVE_LINK_NAME`` variable to specify the actual - location: - :: + use the :term:`ALTERNATIVE_LINK_NAME` variable to specify the actual + location:: ALTERNATIVE_LINK_NAME[bracket] = "/usr/bin/[" @@ -78,7 +73,7 @@ system and gives an overview of their function and contents. .. note:: - If ``ALTERNATIVE_LINK_NAME`` is not defined, it defaults to ``${bindir}/name``. + If :term:`ALTERNATIVE_LINK_NAME` is not defined, it defaults to ``${bindir}/name``. For more information on the alternatives system, see the ":ref:`update-alternatives.bbclass <ref-classes-update-alternatives>`" @@ -90,8 +85,7 @@ system and gives an overview of their function and contents. default regardless of the command name or package, a default for specific duplicated commands regardless of the package, or a default for specific commands tied to particular packages. Here are the - available syntax forms: - :: + available syntax forms:: ALTERNATIVE_PRIORITY = "priority" ALTERNATIVE_PRIORITY[name] = "priority" @@ -107,8 +101,7 @@ system and gives an overview of their function and contents. default location for all duplicated commands regardless of the command name or package, a default for specific duplicated commands regardless of the package, or a default for specific commands tied to - particular packages. Here are the available syntax forms: - :: + particular packages. Here are the available syntax forms:: ALTERNATIVE_TARGET = "target" ALTERNATIVE_TARGET[name] = "target" @@ -116,11 +109,11 @@ system and gives an overview of their function and contents. .. note:: - If ``ALTERNATIVE_TARGET`` is not defined, it inherits the value + If :term:`ALTERNATIVE_TARGET` is not defined, it inherits the value from the :term:`ALTERNATIVE_LINK_NAME` variable. - If ``ALTERNATIVE_LINK_NAME`` and ``ALTERNATIVE_TARGET`` are the - same, the target for ``ALTERNATIVE_TARGET`` has "``.{BPN}``" + If :term:`ALTERNATIVE_LINK_NAME` and :term:`ALTERNATIVE_TARGET` are the + same, the target for :term:`ALTERNATIVE_TARGET` has "``.{BPN}``" appended to it. Finally, if the file referenced has not been renamed, the @@ -138,8 +131,8 @@ system and gives an overview of their function and contents. class, this variable identifies a list of distribution features where at least one must be enabled in the current configuration in order for the OpenEmbedded build system to build the recipe. In other words, - if none of the features listed in ``ANY_OF_DISTRO_FEATURES`` - appear in ``DISTRO_FEATURES`` within the current configuration, then + if none of the features listed in :term:`ANY_OF_DISTRO_FEATURES` + appear in :term:`DISTRO_FEATURES` within the current configuration, then the recipe will be skipped, and if the build system attempts to build the recipe then an error will be triggered. @@ -159,8 +152,7 @@ system and gives an overview of their function and contents. determines the type of information used to create a released archive. You can use this variable to create archives of patched source, original source, configured source, and so forth by employing the - following variable flags (varflags): - :: + following variable flags (varflags):: ARCHIVER_MODE[src] = "original" # Uses original (unpacked) source files. ARCHIVER_MODE[src] = "patched" # Uses patched source files. This is the default. @@ -182,7 +174,7 @@ system and gives an overview of their function and contents. attempt to build. Instead, BitBake assumes these recipes have already been built. - In OpenEmbedded-Core, ``ASSUME_PROVIDED`` mostly specifies native + In OpenEmbedded-Core, :term:`ASSUME_PROVIDED` mostly specifies native tools that should not be built. An example is ``git-native``, which when specified, allows for the Git binary from the host to be used rather than building ``git-native``. @@ -193,14 +185,12 @@ system and gives an overview of their function and contents. system. Separate multiple entries using spaces. As an example, use the following form to add an ``shlib`` provider of - shlibname in packagename with the optional version: - :: + shlibname in packagename with the optional version:: shlibname:packagename[_version] Here is an example that adds a shared library named ``libEGL.so.1`` - as being provided by the ``libegl-implementation`` package: - :: + as being provided by the ``libegl-implementation`` package:: ASSUME_SHLIBS = "libEGL.so.1:libegl-implementation" @@ -210,7 +200,7 @@ system and gives an overview of their function and contents. :term:`AUTO_LIBNAME_PKGS` When the :ref:`debian <ref-classes-debian>` class is inherited, - which is the default behavior, ``AUTO_LIBNAME_PKGS`` specifies which + which is the default behavior, :term:`AUTO_LIBNAME_PKGS` specifies which packages should be checked for libraries and renamed according to Debian library package naming. @@ -223,9 +213,8 @@ system and gives an overview of their function and contents. :ref:`syslinux <ref-classes-syslinux>` class checks this variable. :term:`AUTOREV` - When ``SRCREV`` is set to the value of this variable, it specifies to - use the latest source revision in the repository. Here is an example: - :: + When :term:`SRCREV` is set to the value of this variable, it specifies to + use the latest source revision in the repository. Here is an example:: SRCREV = "${AUTOREV}" @@ -235,7 +224,7 @@ system and gives an overview of their function and contents. have a kernel recipe that inherits the :ref:`kernel <ref-classes-kernel>` class and you use the previous statement. In this example, ``${SRCPV}`` does not automatically get - into ``PV``. Consequently, you need to change ``PV`` in your recipe + into :term:`PV`. Consequently, you need to change :term:`PV` in your recipe so that it does contain ``${SRCPV}``. For more information see the @@ -249,8 +238,8 @@ system and gives an overview of their function and contents. .. note:: - It is assumed that all changes to ``COMMON_LICENSE_DIR`` and - ``LICENSE_PATH`` have been done before ``AVAILABLE_LICENSES`` + It is assumed that all changes to :term:`COMMON_LICENSE_DIR` and + :term:`LICENSE_PATH` have been done before :term:`AVAILABLE_LICENSES` is defined (in :ref:`ref-classes-license`). :term:`AVAILTUNES` @@ -286,12 +275,11 @@ system and gives an overview of their function and contents. The directory within the :term:`Build Directory` in which the OpenEmbedded build system places generated objects during a recipe's build process. By default, this directory is the same as the - :term:`S` directory, which is defined as: - :: + :term:`S` directory, which is defined as:: S = "${WORKDIR}/${BP}" - You can separate the (``S``) directory and the directory pointed to + You can separate the (:term:`S`) directory and the directory pointed to by the ``B`` variable. Most Autotools-based recipes support separating these directories. The build system defaults to using separate directories for ``gcc`` and some kernel recipes. @@ -301,15 +289,13 @@ system and gives an overview of their function and contents. packages are packages installed only through the :term:`RRECOMMENDS` variable. You can prevent any of these "recommended" packages from being installed by listing them - with the ``BAD_RECOMMENDATIONS`` variable: - :: + with the :term:`BAD_RECOMMENDATIONS` variable:: BAD_RECOMMENDATIONS = "package_name package_name package_name ..." You can set this variable globally in your ``local.conf`` file or you can attach it to a specific image recipe by using the recipe name - override: - :: + override:: BAD_RECOMMENDATIONS_pn-target_image = "package_name" @@ -319,8 +305,8 @@ system and gives an overview of their function and contents. variable), the OpenEmbedded build system ignores your request and will install the packages to avoid dependency errors. - Support for this variable exists only when using the IPK and RPM - packaging backend. Support does not exist for DEB. + This variable is supported only when using the IPK and RPM + packaging backends. DEB is not supported. See the :term:`NO_RECOMMENDATIONS` and the :term:`PACKAGE_EXCLUDE` variables for related @@ -328,12 +314,12 @@ system and gives an overview of their function and contents. :term:`BASE_LIB` The library directory name for the CPU or Application Binary - Interface (ABI) tune. The ``BASE_LIB`` applies only in the Multilib + Interface (ABI) tune. The :term:`BASE_LIB` applies only in the Multilib context. See the ":ref:`dev-manual/common-tasks:combining multiple versions of library files into one image`" section in the Yocto Project Development Tasks Manual for information on Multilib. - The ``BASE_LIB`` variable is defined in the machine include files in + The :term:`BASE_LIB` variable is defined in the machine include files in the :term:`Source Directory`. If Multilib is not being used, the value defaults to "lib". @@ -346,11 +332,11 @@ system and gives an overview of their function and contents. to use to obtain the required source code. Following are considerations surrounding this variable: - - This host list is only used if ``BB_NO_NETWORK`` is either not set + - This host list is only used if :term:`BB_NO_NETWORK` is either not set or set to "0". - - Limited support for wildcard matching against the beginning of - host names exists. For example, the following setting matches + - There is limited support for wildcard matching against the beginning of + host names. For example, the following setting matches ``git.gnu.org``, ``ftp.gnu.org``, and ``foo.git.gnu.org``. :: @@ -371,14 +357,14 @@ system and gives an overview of their function and contents. - Attempts to access networks not in the host list cause a failure. - Using ``BB_ALLOWED_NETWORKS`` in conjunction with + Using :term:`BB_ALLOWED_NETWORKS` in conjunction with :term:`PREMIRRORS` is very useful. Adding the host - you want to use to ``PREMIRRORS`` results in the source code being + you want to use to :term:`PREMIRRORS` results in the source code being fetched from an allowed location and avoids raising an error when a host that is not allowed is in a :term:`SRC_URI` statement. This is because the fetcher does not attempt to use the - host listed in ``SRC_URI`` after a successful fetch from the - ``PREMIRRORS`` occurs. + host listed in :term:`SRC_URI` after a successful fetch from the + :term:`PREMIRRORS` occurs. :term:`BB_DANGLINGAPPENDS_WARNONLY` Defines how BitBake handles situations where an append file @@ -394,8 +380,7 @@ system and gives an overview of their function and contents. You can change the default behavior by setting this variable to "1", "yes", or "true" in your ``local.conf`` file, which is located in the - :term:`Build Directory`: Here is an example: - :: + :term:`Build Directory`: Here is an example:: BB_DANGLINGAPPENDS_WARNONLY = "1" @@ -404,7 +389,7 @@ system and gives an overview of their function and contents. you to control the build based on these parameters. Disk space monitoring is disabled by default. To enable monitoring, - add the ``BB_DISKMON_DIRS`` variable to your ``conf/local.conf`` file + add the :term:`BB_DISKMON_DIRS` variable to your ``conf/local.conf`` file found in the :term:`Build Directory`. Use the following form: @@ -444,8 +429,7 @@ system and gives an overview of their function and contents. not specify G, M, or K, Kbytes is assumed by default. Do not use GB, MB, or KB. - Here are some examples: - :: + Here are some examples:: BB_DISKMON_DIRS = "ABORT,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K" BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G" @@ -460,7 +444,7 @@ system and gives an overview of their function and contents. variable, the build system also issue a warning when the disk space in the ``${SSTATE_DIR}`` directory drops below 1 Gbyte or the number of free inodes drops below 100 Kbytes. Subsequent warnings are issued - during intervals as defined by the ``BB_DISKMON_WARNINTERVAL`` + during intervals as defined by the :term:`BB_DISKMON_WARNINTERVAL` variable. The second example stops the build after all currently executing @@ -477,16 +461,15 @@ system and gives an overview of their function and contents. intervals, define the variable in your ``conf/local.conf`` file in the :term:`Build Directory`. - If you are going to use the ``BB_DISKMON_WARNINTERVAL`` variable, you + If you are going to use the :term:`BB_DISKMON_WARNINTERVAL` variable, you must also use the :term:`BB_DISKMON_DIRS` variable and define its action as "WARN". During the build, subsequent warnings are issued each time disk space or number of free inodes further reduces by the respective interval. - If you do not provide a ``BB_DISKMON_WARNINTERVAL`` variable and you - do use ``BB_DISKMON_DIRS`` with the "WARN" action, the disk - monitoring interval defaults to the following: - :: + If you do not provide a :term:`BB_DISKMON_WARNINTERVAL` variable and you + do use :term:`BB_DISKMON_DIRS` with the "WARN" action, the disk + monitoring interval defaults to the following:: BB_DISKMON_WARNINTERVAL = "50M,5K" @@ -509,8 +492,7 @@ system and gives an overview of their function and contents. G, M, or K for Gbytes, Mbytes, or Kbytes, respectively. You cannot use GB, MB, or KB. - Here is an example: - :: + Here is an example:: BB_DISKMON_DIRS = "WARN,${SSTATE_DIR},1G,100K" BB_DISKMON_WARNINTERVAL = "50M,5K" @@ -539,7 +521,7 @@ system and gives an overview of their function and contents. ``local.conf`` file in the :term:`Build Directory`. Once you have the tarballs containing your source files, you can - clean up your ``DL_DIR`` directory by deleting any Git or other + clean up your :term:`DL_DIR` directory by deleting any Git or other source control work directories. :term:`BB_NUMBER_THREADS` @@ -547,13 +529,13 @@ system and gives an overview of their function and contents. time. The OpenEmbedded build system automatically configures this variable to be equal to the number of cores on the build system. For example, a system with a dual core processor that also uses - hyper-threading causes the ``BB_NUMBER_THREADS`` variable to default + hyper-threading causes the :term:`BB_NUMBER_THREADS` variable to default to "4". For single socket systems (i.e. one CPU), you should not have to override this variable to gain optimal parallelism during builds. However, if you have very large systems that employ multiple physical - CPUs, you might want to make sure the ``BB_NUMBER_THREADS`` variable + CPUs, you might want to make sure the :term:`BB_NUMBER_THREADS` variable is not set higher than "20". For more information on speeding up builds, see the @@ -562,12 +544,11 @@ system and gives an overview of their function and contents. :term:`BB_SERVER_TIMEOUT` Specifies the time (in seconds) after which to unload the BitBake - server due to inactivity. Set ``BB_SERVER_TIMEOUT`` to determine how + server due to inactivity. Set :term:`BB_SERVER_TIMEOUT` to determine how long the BitBake server stays resident between invocations. For example, the following statement in your ``local.conf`` file - instructs the server to be unloaded after 20 seconds of inactivity: - :: + instructs the server to be unloaded after 20 seconds of inactivity:: BB_SERVER_TIMEOUT = "20" @@ -576,30 +557,29 @@ system and gives an overview of their function and contents. :term:`BBCLASSEXTEND` Allows you to extend a recipe so that it builds variants of the - software. Common variants for recipes exist such as "natives" like + software. There are common variants for recipes as "natives" like ``quilt-native``, which is a copy of Quilt built to run on the build system; "crosses" such as ``gcc-cross``, which is a compiler built to run on the build machine but produces binaries that run on the target :term:`MACHINE`; "nativesdk", which targets the SDK - machine instead of ``MACHINE``; and "mulitlibs" in the form + machine instead of :term:`MACHINE`; and "mulitlibs" in the form "``multilib:``\ multilib_name". To build a different variant of the recipe with a minimal amount of - code, it usually is as simple as adding the following to your recipe: - :: + code, it usually is as simple as adding the following to your recipe:: BBCLASSEXTEND =+ "native nativesdk" BBCLASSEXTEND =+ "multilib:multilib_name" .. note:: - Internally, the ``BBCLASSEXTEND`` mechanism generates recipe + Internally, the :term:`BBCLASSEXTEND` mechanism generates recipe variants by rewriting variable values and applying overrides such as ``_class-native``. For example, to generate a native version of a recipe, a :term:`DEPENDS` on "foo" is rewritten to a ``DEPENDS`` on "foo-native". - Even when using ``BBCLASSEXTEND``, the recipe is only parsed once. + Even when using :term:`BBCLASSEXTEND`, the recipe is only parsed once. Parsing once adds some limitations. For example, it is not possible to include a different file depending on the variant, since ``include`` statements are processed when the recipe is @@ -625,14 +605,14 @@ system and gives an overview of their function and contents. - effectively letting you control the precedence for the multiple layers. The precedence established through this variable stands regardless of a recipe's version (:term:`PV` variable). For - example, a layer that has a recipe with a higher ``PV`` value but for - which the ``BBFILE_PRIORITY`` is set to have a lower precedence still + example, a layer that has a recipe with a higher :term:`PV` value but for + which the :term:`BBFILE_PRIORITY` is set to have a lower precedence still has a lower precedence. - A larger value for the ``BBFILE_PRIORITY`` variable results in a + A larger value for the :term:`BBFILE_PRIORITY` variable results in a higher precedence. For example, the value 6 has a higher precedence - than the value 5. If not specified, the ``BBFILE_PRIORITY`` variable - is set based on layer dependencies (see the ``LAYERDEPENDS`` variable + than the value 5. If not specified, the :term:`BBFILE_PRIORITY` variable + is set based on layer dependencies (see the :term:`LAYERDEPENDS` variable for more information. The default priority, if unspecified for a layer with no dependencies, is the lowest defined priority + 1 (or 1 if no priorities are defined). @@ -655,15 +635,14 @@ system and gives an overview of their function and contents. Activates content when identified layers are present. You identify the layers by the collections that the layers define. - Use the ``BBFILES_DYNAMIC`` variable to avoid ``.bbappend`` files + Use the :term:`BBFILES_DYNAMIC` variable to avoid ``.bbappend`` files whose corresponding ``.bb`` file is in a layer that attempts to modify other layers through ``.bbappend`` but does not want to introduce a hard dependency on those other layers. - Use the following form for ``BBFILES_DYNAMIC``: + Use the following form for :term:`BBFILES_DYNAMIC`: collection_name:filename_pattern The following example identifies two - collection names and two filename patterns: - :: + collection names and two filename patterns:: BBFILES_DYNAMIC += " \ clang-layer:${LAYERDIR}/bbappends/meta-clang/*/*/*.bbappend \ @@ -685,14 +664,13 @@ system and gives an overview of their function and contents. :term:`BBINCLUDELOGS_LINES` If :term:`BBINCLUDELOGS` is set, specifies the maximum number of lines from the task log file to print when - reporting a failed task. If you do not set ``BBINCLUDELOGS_LINES``, + reporting a failed task. If you do not set :term:`BBINCLUDELOGS_LINES`, the entire log is printed. :term:`BBLAYERS` Lists the layers to enable during the build. This variable is defined in the ``bblayers.conf`` configuration file in the :term:`Build Directory`. - Here is an example: - :: + Here is an example:: BBLAYERS = " \ /home/scottrif/poky/meta \ @@ -707,7 +685,7 @@ system and gives an overview of their function and contents. :term:`BBMASK` Prevents BitBake from processing recipes and recipe append files. - You can use the ``BBMASK`` variable to "hide" these ``.bb`` and + You can use the :term:`BBMASK` variable to "hide" these ``.bb`` and ``.bbappend`` files. BitBake ignores any recipe or recipe append files that match any of the expressions. It is as if BitBake does not see them at all. Consequently, matching files are not parsed or @@ -721,14 +699,13 @@ system and gives an overview of their function and contents. The following example uses a complete regular expression to tell BitBake to ignore all recipe and recipe append files in the - ``meta-ti/recipes-misc/`` directory: - :: + ``meta-ti/recipes-misc/`` directory:: BBMASK = "meta-ti/recipes-misc/" If you want to mask out multiple directories or recipes, you can specify multiple regular expression fragments. This next example - masks out multiple directories and individual recipes: :: + masks out multiple directories and individual recipes:: BBMASK += "/meta-ti/recipes-misc/ meta-ti/recipes-ti/packagegroup/" BBMASK += "/meta-oe/recipes-support/" @@ -746,8 +723,7 @@ system and gives an overview of their function and contents. building targets with multiple configurations. Use this variable in your ``conf/local.conf`` configuration file. Specify a multiconfigname for each configuration file you are using. For - example, the following line specifies three configuration files: - :: + example, the following line specifies three configuration files:: BBMULTICONFIG = "configA configB configC" @@ -756,7 +732,7 @@ system and gives an overview of their function and contents. ``conf/multiconfig`` directory (e.g. build_directory\ ``/conf/multiconfig/configA.conf``). - For information on how to use ``BBMULTICONFIG`` in an environment + For information on how to use :term:`BBMULTICONFIG` in an environment that supports building targets with multiple configurations, see the ":ref:`dev-manual/common-tasks:building images for multiple targets using multiple configurations`" section in the Yocto Project Development Tasks Manual. @@ -768,10 +744,9 @@ system and gives an overview of their function and contents. .. note:: If you run BitBake from a directory outside of the - :term:`Build Directory`, you must be sure to set ``BBPATH`` + :term:`Build Directory`, you must be sure to set :term:`BBPATH` to point to the Build Directory. Set the variable as you would any - environment variable and then run BitBake: - :: + environment variable and then run BitBake:: $ BBPATH = "build_directory" $ export BBPATH @@ -779,18 +754,17 @@ system and gives an overview of their function and contents. :term:`BBSERVER` - If defined in the BitBake environment, ``BBSERVER`` points to the + If defined in the BitBake environment, :term:`BBSERVER` points to the BitBake remote server. Use the following format to export the variable to the BitBake - environment: - :: + environment:: export BBSERVER=localhost:$port - By default, ``BBSERVER`` also appears in + By default, :term:`BBSERVER` also appears in :term:`bitbake:BB_HASHBASE_WHITELIST`. - Consequently, ``BBSERVER`` is excluded from checksum and dependency + Consequently, :term:`BBSERVER` is excluded from checksum and dependency data. :term:`BINCONFIG` @@ -803,8 +777,7 @@ system and gives an overview of their function and contents. replaced. To add multiple scripts, separate them by spaces. Here is an example - from the ``libpng`` recipe: - :: + from the ``libpng`` recipe:: BINCONFIG = "${bindir}/libpng-config ${bindir}/libpng16-config" @@ -818,7 +791,7 @@ system and gives an overview of their function and contents. .. note:: - The ``BINCONFIG_GLOB`` variable uses + The :term:`BINCONFIG_GLOB` variable uses `shell globbing <https://tldp.org/LDP/abs/html/globbingref.html>`__, which is recognition and expansion of wildcards during pattern matching. Shell globbing is very similar to @@ -833,9 +806,8 @@ system and gives an overview of their function and contents. :term:`BP` The base recipe name and version but without any special recipe name - suffix (i.e. ``-native``, ``lib64-``, and so forth). ``BP`` is - comprised of the following: - :: + suffix (i.e. ``-native``, ``lib64-``, and so forth). :term:`BP` is + comprised of the following:: ${BPN}-${PV} @@ -856,23 +828,23 @@ system and gives an overview of their function and contents. :term:`BUILD_ARCH` Specifies the architecture of the build host (e.g. ``i686``). The - OpenEmbedded build system sets the value of ``BUILD_ARCH`` from the + OpenEmbedded build system sets the value of :term:`BUILD_ARCH` from the machine name reported by the ``uname`` command. :term:`BUILD_AS_ARCH` Specifies the architecture-specific assembler flags for the build - host. By default, the value of ``BUILD_AS_ARCH`` is empty. + host. By default, the value of :term:`BUILD_AS_ARCH` is empty. :term:`BUILD_CC_ARCH` Specifies the architecture-specific C compiler flags for the build - host. By default, the value of ``BUILD_CC_ARCH`` is empty. + host. By default, the value of :term:`BUILD_CC_ARCH` is empty. :term:`BUILD_CCLD` Specifies the linker command to be used for the build host when the C - compiler is being used as the linker. By default, ``BUILD_CCLD`` + compiler is being used as the linker. By default, :term:`BUILD_CCLD` points to GCC and passes as arguments the value of :term:`BUILD_CC_ARCH`, assuming - ``BUILD_CC_ARCH`` is set. + :term:`BUILD_CC_ARCH` is set. :term:`BUILD_CFLAGS` Specifies the flags to pass to the C compiler when building for the @@ -894,19 +866,19 @@ system and gives an overview of their function and contents. :term:`BUILD_FC` Specifies the Fortran compiler command for the build host. By - default, ``BUILD_FC`` points to Gfortran and passes as arguments the + default, :term:`BUILD_FC` points to Gfortran and passes as arguments the value of :term:`BUILD_CC_ARCH`, assuming - ``BUILD_CC_ARCH`` is set. + :term:`BUILD_CC_ARCH` is set. :term:`BUILD_LD` Specifies the linker command for the build host. By default, - ``BUILD_LD`` points to the GNU linker (ld) and passes as arguments + :term:`BUILD_LD` points to the GNU linker (ld) and passes as arguments the value of :term:`BUILD_LD_ARCH`, assuming - ``BUILD_LD_ARCH`` is set. + :term:`BUILD_LD_ARCH` is set. :term:`BUILD_LD_ARCH` Specifies architecture-specific linker flags for the build host. By - default, the value of ``BUILD_LD_ARCH`` is empty. + default, the value of :term:`BUILD_LD_ARCH` is empty. :term:`BUILD_LDFLAGS` Specifies the flags to pass to the linker when building for the build @@ -931,13 +903,13 @@ system and gives an overview of their function and contents. :term:`BUILD_PREFIX` The toolchain binary prefix used for native recipes. The OpenEmbedded - build system uses the ``BUILD_PREFIX`` value to set the + build system uses the :term:`BUILD_PREFIX` value to set the :term:`TARGET_PREFIX` when building for ``native`` recipes. :term:`BUILD_STRIP` Specifies the command to be used to strip debugging symbols from - binaries produced for the build host. By default, ``BUILD_STRIP`` + binaries produced for the build host. By default, :term:`BUILD_STRIP` points to ``${``\ :term:`BUILD_PREFIX`\ ``}strip``. @@ -950,7 +922,7 @@ system and gives an overview of their function and contents. on :term:`BUILD_ARCH`, :term:`BUILD_VENDOR`, and :term:`BUILD_OS`. You do not need to set the - ``BUILD_SYS`` variable yourself. + :term:`BUILD_SYS` variable yourself. :term:`BUILD_VENDOR` Specifies the vendor name to use when building for the build host. @@ -961,7 +933,7 @@ system and gives an overview of their function and contents. You can define this directory indirectly through the :ref:`structure-core-script` script by passing in a Build Directory path when you run the script. If you run the script and do - not provide a Build Directory path, the ``BUILDDIR`` defaults to + not provide a Build Directory path, the :term:`BUILDDIR` defaults to ``build`` in the current directory. :term:`BUILDHISTORY_COMMIT` @@ -975,25 +947,23 @@ system and gives an overview of their function and contents. you should set this value to "1". By default, the ``buildhistory`` class does not commit the build - history output in a local Git repository: - :: + history output in a local Git repository:: BUILDHISTORY_COMMIT ?= "0" :term:`BUILDHISTORY_COMMIT_AUTHOR` When inheriting the :ref:`buildhistory <ref-classes-buildhistory>` class, this variable specifies the author to use for each Git commit. - In order for the ``BUILDHISTORY_COMMIT_AUTHOR`` variable to work, the + In order for the :term:`BUILDHISTORY_COMMIT_AUTHOR` variable to work, the :term:`BUILDHISTORY_COMMIT` variable must be set to "1". Git requires that the value you provide for the - ``BUILDHISTORY_COMMIT_AUTHOR`` variable takes the form of "name + :term:`BUILDHISTORY_COMMIT_AUTHOR` variable takes the form of "name email@host". Providing an email address or host that is not valid does not produce an error. - By default, the ``buildhistory`` class sets the variable as follows: - :: + By default, the ``buildhistory`` class sets the variable as follows:: BUILDHISTORY_COMMIT_AUTHOR ?= "buildhistory <buildhistory@${DISTRO}>" @@ -1003,8 +973,7 @@ system and gives an overview of their function and contents. information is kept. For more information on how the variable works, see the ``buildhistory.class``. - By default, the ``buildhistory`` class sets the directory as follows: - :: + By default, the ``buildhistory`` class sets the directory as follows:: BUILDHISTORY_DIR ?= "${TOPDIR}/buildhistory" @@ -1032,8 +1001,7 @@ system and gives an overview of their function and contents. each file staged (i.e. the output of the task). By default, the ``buildhistory`` class enables the following - features: - :: + features:: BUILDHISTORY_FEATURES ?= "image package sdk" @@ -1049,8 +1017,7 @@ system and gives an overview of their function and contents. Consequently, you can include files that might not always be present. By default, the ``buildhistory`` class provides paths to the - following files: - :: + following files:: BUILDHISTORY_IMAGE_FILES ?= "/etc/passwd /etc/group" @@ -1058,7 +1025,7 @@ system and gives an overview of their function and contents. When inheriting the :ref:`buildhistory <ref-classes-buildhistory>` class, this variable optionally specifies a remote repository to which build history pushes Git changes. In order for - ``BUILDHISTORY_PUSH_REPO`` to work, + :term:`BUILDHISTORY_PUSH_REPO` to work, :term:`BUILDHISTORY_COMMIT` must be set to "1". @@ -1067,8 +1034,7 @@ system and gives an overview of their function and contents. that you have set up manually using ``git remote`` within the local repository. - By default, the ``buildhistory`` class sets the variable as follows: - :: + By default, the ``buildhistory`` class sets the variable as follows:: BUILDHISTORY_PUSH_REPO ?= "" @@ -1100,7 +1066,7 @@ system and gives an overview of their function and contents. Points to the location of the directory that holds build statistics when you use and enable the :ref:`buildstats <ref-classes-buildstats>` class. The - ``BUILDSTATS_BASE`` directory defaults to + :term:`BUILDSTATS_BASE` directory defaults to ``${``\ :term:`TMPDIR`\ ``}/buildstats/``. :term:`BUSYBOX_SPLIT_SUID` @@ -1109,7 +1075,7 @@ system and gives an overview of their function and contents. ``setuid root``, and one for the remaining features (i.e. those that do not require ``setuid root``). - The ``BUSYBOX_SPLIT_SUID`` variable defaults to "1", which results in + The :term:`BUSYBOX_SPLIT_SUID` variable defaults to "1", which results in splitting the output executable file. Set the variable to "0" to get a single output executable file. @@ -1126,7 +1092,7 @@ system and gives an overview of their function and contents. exported to an environment variable and thus made visible to the software being built during the compilation step. - Default initialization for ``CFLAGS`` varies depending on what is + Default initialization for :term:`CFLAGS` varies depending on what is being built: - :term:`TARGET_CFLAGS` when building for the @@ -1152,8 +1118,7 @@ system and gives an overview of their function and contents. ``bitbake.conf`` file. As an example, the following override allows you to install extra - files, but only when building for the target: - :: + files, but only when building for the target:: do_install_append_class-target() { install my-extra-file ${D}${sysconfdir} @@ -1161,18 +1126,17 @@ system and gives an overview of their function and contents. Here is an example where ``FOO`` is set to "native" when building for the build host, and to "other" when not - building for the build host: - :: + building for the build host:: FOO_class-native = "native" FOO = "other" - The underlying mechanism behind ``CLASSOVERRIDE`` is simply + The underlying mechanism behind :term:`CLASSOVERRIDE` is simply that it is included in the default value of :term:`OVERRIDES`. :term:`CLEANBROKEN` - If set to "1" within a recipe, ``CLEANBROKEN`` specifies that the + If set to "1" within a recipe, :term:`CLEANBROKEN` specifies that the ``make clean`` command does not work for the software being built. Consequently, the OpenEmbedded build system will not try to run ``make clean`` during the :ref:`ref-tasks-configure` @@ -1221,7 +1185,7 @@ system and gives an overview of their function and contents. .. note:: - The ``COMPLEMENTARY_GLOB`` variable uses Unix filename pattern matching + The :term:`COMPLEMENTARY_GLOB` variable uses Unix filename pattern matching (`fnmatch <https://docs.python.org/3/library/fnmatch.html#module-fnmatch>`__), which is similar to the Unix style pathname pattern expansion (`glob <https://docs.python.org/3/library/glob.html>`__). @@ -1229,14 +1193,13 @@ system and gives an overview of their function and contents. The resulting list of complementary packages is associated with an item that can be added to :term:`IMAGE_FEATURES`. An example usage of - this is the "dev-pkgs" item that when added to ``IMAGE_FEATURES`` + this is the "dev-pkgs" item that when added to :term:`IMAGE_FEATURES` will install -dev packages (containing headers and other development files) for every package in the image. To add a new feature item pointing to a wildcard, use a variable flag to specify the feature item name and use the value to specify the - wildcard. Here is an example: - :: + wildcard. Here is an example:: COMPLEMENTARY_GLOB[dev-pkgs] = '*-dev' @@ -1252,7 +1215,7 @@ system and gives an overview of their function and contents. :term:`CONF_VERSION` Tracks the version of the local configuration file (i.e. - ``local.conf``). The value for ``CONF_VERSION`` increments each time + ``local.conf``). The value for :term:`CONF_VERSION` increments each time ``build/conf/`` compatibility changes. :term:`CONFFILES` @@ -1262,29 +1225,28 @@ system and gives an overview of their function and contents. files you have changed after the original installation and that you now want to remain unchanged are overwritten. In other words, editable files might exist in the package that you do not want reset - as part of the package update process. You can use the ``CONFFILES`` + as part of the package update process. You can use the :term:`CONFFILES` variable to list the files in the package that you wish to prevent the PMS from overwriting during this update process. - To use the ``CONFFILES`` variable, provide a package name override + To use the :term:`CONFFILES` variable, provide a package name override that identifies the resulting package. Then, provide a - space-separated list of files. Here is an example: - :: + space-separated list of files. Here is an example:: CONFFILES_${PN} += "${sysconfdir}/file1 \ ${sysconfdir}/file2 ${sysconfdir}/file3" - A relationship exists between the ``CONFFILES`` and ``FILES`` - variables. The files listed within ``CONFFILES`` must be a subset of - the files listed within ``FILES``. Because the configuration files - you provide with ``CONFFILES`` are simply being identified so that + There is a relationship between the :term:`CONFFILES` and :term:`FILES` + variables. The files listed within :term:`CONFFILES` must be a subset of + the files listed within :term:`FILES`. Because the configuration files + you provide with :term:`CONFFILES` are simply being identified so that the PMS will not overwrite them, it makes sense that the files must - already be included as part of the package through the ``FILES`` + already be included as part of the package through the :term:`FILES` variable. .. note:: - When specifying paths as part of the ``CONFFILES`` variable, it is + When specifying paths as part of the :term:`CONFFILES` variable, it is good practice to use appropriate path variables. For example, ``${sysconfdir}`` rather than ``/etc`` or ``${bindir}`` rather than ``/usr/bin``. You can find a list of these variables at @@ -1297,7 +1259,7 @@ system and gives an overview of their function and contents. variable as an environment variable. By default, the variable is set to null (""). - The ``CONFIG_INITRAMFS_SOURCE`` can be either a single cpio archive + The :term:`CONFIG_INITRAMFS_SOURCE` can be either a single cpio archive with a ``.cpio`` suffix or a space-separated list of directories and files for building the initramfs image. A cpio archive should contain a filesystem archive to be used as an initramfs image. Directories @@ -1325,8 +1287,8 @@ system and gives an overview of their function and contents. :ref:`features_check <ref-classes-features_check>` class, this variable identifies distribution features that would be in conflict should the recipe be built. In other words, if the - ``CONFLICT_DISTRO_FEATURES`` variable lists a feature that also - appears in ``DISTRO_FEATURES`` within the current configuration, then + :term:`CONFLICT_DISTRO_FEATURES` variable lists a feature that also + appears in :term:`DISTRO_FEATURES` within the current configuration, then the recipe will be skipped, and if the build system attempts to build the recipe then an error will be triggered. @@ -1335,16 +1297,16 @@ system and gives an overview of their function and contents. archived by the :ref:`archiver <ref-classes-archiver>` class. In other words, if a license in a recipe's :term:`LICENSE` value is in the value of - ``COPYLEFT_LICENSE_EXCLUDE``, then its source is not archived by the + :term:`COPYLEFT_LICENSE_EXCLUDE`, then its source is not archived by the class. .. note:: - The ``COPYLEFT_LICENSE_EXCLUDE`` variable takes precedence over the + The :term:`COPYLEFT_LICENSE_EXCLUDE` variable takes precedence over the :term:`COPYLEFT_LICENSE_INCLUDE` variable. The default value, which is "CLOSED Proprietary", for - ``COPYLEFT_LICENSE_EXCLUDE`` is set by the + :term:`COPYLEFT_LICENSE_EXCLUDE` is set by the :ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which is inherited by the ``archiver`` class. @@ -1352,7 +1314,7 @@ system and gives an overview of their function and contents. A space-separated list of licenses to include in the source archived by the :ref:`archiver <ref-classes-archiver>` class. In other words, if a license in a recipe's :term:`LICENSE` - value is in the value of ``COPYLEFT_LICENSE_INCLUDE``, then its + value is in the value of :term:`COPYLEFT_LICENSE_INCLUDE`, then its source is archived by the class. The default value is set by the @@ -1363,28 +1325,28 @@ system and gives an overview of their function and contents. :term:`COPYLEFT_PN_EXCLUDE` A list of recipes to exclude in the source archived by the :ref:`archiver <ref-classes-archiver>` class. The - ``COPYLEFT_PN_EXCLUDE`` variable overrides the license inclusion and + :term:`COPYLEFT_PN_EXCLUDE` variable overrides the license inclusion and exclusion caused through the :term:`COPYLEFT_LICENSE_INCLUDE` and :term:`COPYLEFT_LICENSE_EXCLUDE` variables, respectively. The default value, which is "" indicating to not explicitly exclude - any recipes by name, for ``COPYLEFT_PN_EXCLUDE`` is set by the + any recipes by name, for :term:`COPYLEFT_PN_EXCLUDE` is set by the :ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which is inherited by the ``archiver`` class. :term:`COPYLEFT_PN_INCLUDE` A list of recipes to include in the source archived by the :ref:`archiver <ref-classes-archiver>` class. The - ``COPYLEFT_PN_INCLUDE`` variable overrides the license inclusion and + :term:`COPYLEFT_PN_INCLUDE` variable overrides the license inclusion and exclusion caused through the :term:`COPYLEFT_LICENSE_INCLUDE` and :term:`COPYLEFT_LICENSE_EXCLUDE` variables, respectively. The default value, which is "" indicating to not explicitly include - any recipes by name, for ``COPYLEFT_PN_INCLUDE`` is set by the + any recipes by name, for :term:`COPYLEFT_PN_INCLUDE` is set by the :ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which is inherited by the ``archiver`` class. @@ -1394,7 +1356,7 @@ system and gives an overview of their function and contents. Recipe types are ``target``, ``native``, ``nativesdk``, ``cross``, ``crosssdk``, and ``cross-canadian``. - The default value, which is "target*", for ``COPYLEFT_RECIPE_TYPES`` + The default value, which is "target*", for :term:`COPYLEFT_RECIPE_TYPES` is set by the :ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which is inherited by the ``archiver`` class. @@ -1408,7 +1370,7 @@ system and gives an overview of their function and contents. .. note:: - The ``COPY_LIC_DIRS`` does not offer a path for adding licenses for + The :term:`COPY_LIC_DIRS` does not offer a path for adding licenses for newly installed packages to an image, which might be most suitable for read-only filesystems that cannot be upgraded. See the :term:`LICENSE_CREATE_PACKAGE` variable for additional information. @@ -1424,7 +1386,7 @@ system and gives an overview of their function and contents. .. note:: - The ``COPY_LIC_MANIFEST`` does not offer a path for adding licenses for + The :term:`COPY_LIC_MANIFEST` does not offer a path for adding licenses for newly installed packages to an image, which might be most suitable for read-only filesystems that cannot be upgraded. See the :term:`LICENSE_CREATE_PACKAGE` variable for additional information. @@ -1444,24 +1406,24 @@ system and gives an overview of their function and contents. Specifies the parent directory of the OpenEmbedded-Core Metadata layer (i.e. ``meta``). - It is an important distinction that ``COREBASE`` points to the parent + It is an important distinction that :term:`COREBASE` points to the parent of this layer and not the layer itself. Consider an example where you have cloned the Poky Git repository and retained the ``poky`` name - for your local copy of the repository. In this case, ``COREBASE`` + for your local copy of the repository. In this case, :term:`COREBASE` points to the ``poky`` folder because it is the parent directory of the ``poky/meta`` layer. :term:`COREBASE_FILES` Lists files from the :term:`COREBASE` directory that should be copied other than the layers listed in the - ``bblayers.conf`` file. The ``COREBASE_FILES`` variable exists for - the purpose of copying metadata from the OpenEmbedded build system + ``bblayers.conf`` file. The :term:`COREBASE_FILES` variable allows + to copy metadata from the OpenEmbedded build system into the extensible SDK. - Explicitly listing files in ``COREBASE`` is needed because it + Explicitly listing files in :term:`COREBASE` is needed because it typically contains build directories and other files that should not normally be copied into the extensible SDK. Consequently, the value - of ``COREBASE_FILES`` is used in order to only copy the files that + of :term:`COREBASE_FILES` is used in order to only copy the files that are actually needed. :term:`CPP` @@ -1473,7 +1435,7 @@ system and gives an overview of their function and contents. variable and thus made visible to the software being built during the compilation step. - Default initialization for ``CPPFLAGS`` varies depending on what is + Default initialization for :term:`CPPFLAGS` varies depending on what is being built: - :term:`TARGET_CPPFLAGS` when building for @@ -1487,12 +1449,12 @@ system and gives an overview of their function and contents. :term:`CROSS_COMPILE` The toolchain binary prefix for the target tools. The - ``CROSS_COMPILE`` variable is the same as the + :term:`CROSS_COMPILE` variable is the same as the :term:`TARGET_PREFIX` variable. .. note:: - The OpenEmbedded build system sets the ``CROSS_COMPILE`` + The OpenEmbedded build system sets the :term:`CROSS_COMPILE` variable only in certain contexts (e.g. when building for kernel and kernel module recipes). @@ -1508,7 +1470,7 @@ system and gives an overview of their function and contents. exported to an environment variable and thus made visible to the software being built during the compilation step. - Default initialization for ``CXXFLAGS`` varies depending on what is + Default initialization for :term:`CXXFLAGS` varies depending on what is being built: - :term:`TARGET_CXXFLAGS` when building for @@ -1524,8 +1486,7 @@ system and gives an overview of their function and contents. The destination directory. The location in the :term:`Build Directory` where components are installed by the :ref:`ref-tasks-install` task. This location defaults - to: - :: + to:: ${WORKDIR}/image @@ -1544,37 +1505,29 @@ system and gives an overview of their function and contents. :term:`DEBIAN_NOAUTONAME` When the :ref:`debian <ref-classes-debian>` class is inherited, - which is the default behavior, ``DEBIAN_NOAUTONAME`` specifies a + which is the default behavior, :term:`DEBIAN_NOAUTONAME` specifies a particular package should not be renamed according to Debian library package naming. You must use the package name as an override when you - set this variable. Here is an example from the ``fontconfig`` recipe: - :: + set this variable. Here is an example from the ``fontconfig`` recipe:: DEBIAN_NOAUTONAME_fontconfig-utils = "1" :term:`DEBIANNAME` When the :ref:`debian <ref-classes-debian>` class is inherited, - which is the default behavior, ``DEBIANNAME`` allows you to override + which is the default behavior, :term:`DEBIANNAME` allows you to override the library name for an individual package. Overriding the library name in these cases is rare. You must use the package name as an override when you set this variable. Here is an example from the - ``dbus`` recipe: - :: + ``dbus`` recipe:: DEBIANNAME_${PN} = "dbus-1" - :term:`DEBUGINFOD_URLS` - Points to the URL of the "debuginfod" server. Such that for every - debugging information lookup, the debuginfod client will query the - server and return the requested information. You set this variable - in your ``local.conf`` file. - :term:`DEBUG_BUILD` Specifies to build packages with debugging information. This - influences the value of the ``SELECTED_OPTIMIZATION`` variable. + influences the value of the :term:`SELECTED_OPTIMIZATION` variable. :term:`DEBUG_OPTIMIZATION` - The options to pass in ``TARGET_CFLAGS`` and ``CFLAGS`` when + The options to pass in :term:`TARGET_CFLAGS` and :term:`CFLAGS` when compiling a system for debugging. This variable defaults to "-O -fno-omit-frame-pointer ${DEBUG_FLAGS} -pipe". @@ -1584,19 +1537,19 @@ system and gives an overview of their function and contents. The most common usage of this is variable is to set it to "-1" within a recipe for a development version of a piece of software. Using the variable in this way causes the stable version of the recipe to build - by default in the absence of ``PREFERRED_VERSION`` being used to + by default in the absence of :term:`PREFERRED_VERSION` being used to build the development version. .. note:: - The bias provided by ``DEFAULT_PREFERENCE`` is weak and is overridden + The bias provided by :term:`DEFAULT_PREFERENCE` is weak and is overridden by :term:`BBFILE_PRIORITY` if that variable is different between two layers that contain different versions of the same recipe. :term:`DEFAULTTUNE` The default CPU and Application Binary Interface (ABI) tunings (i.e. the "tune") used by the OpenEmbedded build system. The - ``DEFAULTTUNE`` helps define + :term:`DEFAULTTUNE` helps define :term:`TUNE_FEATURES`. The default tune is either implicitly or explicitly set by the @@ -1610,8 +1563,7 @@ system and gives an overview of their function and contents. needed by the recipe at build time. As an example, consider a recipe ``foo`` that contains the following - assignment: - :: + assignment:: DEPENDS = "bar" @@ -1622,21 +1574,20 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-configure` task for ``foo`` runs. This mechanism is implemented by having ``do_configure`` depend on the :ref:`ref-tasks-populate_sysroot` task of - each recipe listed in ``DEPENDS``, through a + each recipe listed in :term:`DEPENDS`, through a ``[``\ :ref:`deptask <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`\ ``]`` declaration in the :ref:`base <ref-classes-base>` class. .. note:: - It seldom is necessary to reference, for example, ``STAGING_DIR_HOST`` + It seldom is necessary to reference, for example, :term:`STAGING_DIR_HOST` explicitly. The standard classes and build-related variables are configured to automatically use the appropriate staging sysroots. - As another example, ``DEPENDS`` can also be used to add utilities + As another example, :term:`DEPENDS` can also be used to add utilities that run on the build machine during the build. For example, a recipe that makes use of a code generator built by the recipe ``codegen`` - might have the following: - :: + might have the following:: DEPENDS = "codegen-native" @@ -1646,15 +1597,15 @@ system and gives an overview of their function and contents. .. note:: - - ``DEPENDS`` is a list of recipe names. Or, to be more precise, + - :term:`DEPENDS` is a list of recipe names. Or, to be more precise, it is a list of :term:`PROVIDES` names, which usually match recipe names. Putting a package name such as - "foo-dev" in ``DEPENDS`` does not make sense. Use "foo" + "foo-dev" in :term:`DEPENDS` does not make sense. Use "foo" instead, as this will put files from all the packages that make up ``foo``, which includes those from ``foo-dev``, into the sysroot. - - One recipe having another recipe in ``DEPENDS`` does not by + - One recipe having another recipe in :term:`DEPENDS` does not by itself add any runtime dependencies between the packages produced by the two recipes. However, as explained in the ":ref:`overview-manual/concepts:automatically added runtime dependencies`" @@ -1662,12 +1613,12 @@ system and gives an overview of their function and contents. runtime dependencies will often be added automatically, meaning ``DEPENDS`` alone is sufficient for most recipes. - - Counterintuitively, ``DEPENDS`` is often necessary even for + - Counterintuitively, :term:`DEPENDS` is often necessary even for recipes that install precompiled components. For example, if ``libfoo`` is a precompiled library that links against ``libbar``, then linking against ``libfoo`` requires both ``libfoo`` and ``libbar`` to be available in the sysroot. - Without a ``DEPENDS`` from the recipe that installs ``libfoo`` + Without a :term:`DEPENDS` from the recipe that installs ``libfoo`` to the recipe that installs ``libbar``, other recipes might fail to link against ``libfoo``. @@ -1702,13 +1653,12 @@ system and gives an overview of their function and contents. The BitBake configuration file initially defines the ``DEPLOY_DIR_DEB`` variable as a sub-folder of - :term:`DEPLOY_DIR`: - :: + :term:`DEPLOY_DIR`:: DEPLOY_DIR_DEB = "${DEPLOY_DIR}/deb" The :ref:`package_deb <ref-classes-package_deb>` class uses the - ``DEPLOY_DIR_DEB`` variable to make sure the + :term:`DEPLOY_DIR_DEB` variable to make sure the :ref:`ref-tasks-package_write_deb` task writes Debian packages into the appropriate folder. For more information on how packaging works, see the @@ -1723,6 +1673,13 @@ system and gives an overview of their function and contents. resides within the :term:`Build Directory` as ``${DEPLOY_DIR}/images/${MACHINE}/``. + It must not be used directly in recipes when deploying files. Instead, + it's only useful when a recipe needs to "read" a file already deployed + by a dependency. So, it should be filled with the contents of + :term:`DEPLOYDIR` by the :ref:`deploy <ref-classes-deploy>` class or + with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image + <ref-classes-image>` class. + For more information on the structure of the Build Directory, see ":ref:`ref-manual/structure:the build directory - \`\`build/\`\``" section. For more detail on the contents of the ``deploy`` directory, see the @@ -1738,13 +1695,12 @@ system and gives an overview of their function and contents. "package_ipk". The BitBake configuration file initially defines this variable as a - sub-folder of :term:`DEPLOY_DIR`: - :: + sub-folder of :term:`DEPLOY_DIR`:: DEPLOY_DIR_IPK = "${DEPLOY_DIR}/ipk" The :ref:`package_ipk <ref-classes-package_ipk>` class uses the - ``DEPLOY_DIR_IPK`` variable to make sure the + :term:`DEPLOY_DIR_IPK` variable to make sure the :ref:`ref-tasks-package_write_ipk` task writes IPK packages into the appropriate folder. For more information on how packaging works, see the @@ -1759,13 +1715,12 @@ system and gives an overview of their function and contents. "package_rpm". The BitBake configuration file initially defines this variable as a - sub-folder of :term:`DEPLOY_DIR`: - :: + sub-folder of :term:`DEPLOY_DIR`:: DEPLOY_DIR_RPM = "${DEPLOY_DIR}/rpm" The :ref:`package_rpm <ref-classes-package_rpm>` class uses the - ``DEPLOY_DIR_RPM`` variable to make sure the + :term:`DEPLOY_DIR_RPM` variable to make sure the :ref:`ref-tasks-package_write_rpm` task writes RPM packages into the appropriate folder. For more information on how packaging works, see the @@ -1780,13 +1735,12 @@ system and gives an overview of their function and contents. "package_tar". The BitBake configuration file initially defines this variable as a - sub-folder of :term:`DEPLOY_DIR`: - :: + sub-folder of :term:`DEPLOY_DIR`:: DEPLOY_DIR_TAR = "${DEPLOY_DIR}/tar" The :ref:`package_tar <ref-classes-package_tar>` class uses the - ``DEPLOY_DIR_TAR`` variable to make sure the + :term:`DEPLOY_DIR_TAR` variable to make sure the :ref:`ref-tasks-package_write_tar` task writes TAR packages into the appropriate folder. For more information on how packaging works, see the @@ -1795,20 +1749,19 @@ system and gives an overview of their function and contents. :term:`DEPLOYDIR` When inheriting the :ref:`deploy <ref-classes-deploy>` class, the - ``DEPLOYDIR`` points to a temporary work area for deployed files that - is set in the ``deploy`` class as follows: - :: + :term:`DEPLOYDIR` points to a temporary work area for deployed files that + is set in the ``deploy`` class as follows:: DEPLOYDIR = "${WORKDIR}/deploy-${PN}" Recipes inheriting the ``deploy`` class should copy files to be - deployed into ``DEPLOYDIR``, and the class will take care of copying + deployed into :term:`DEPLOYDIR`, and the class will take care of copying them into :term:`DEPLOY_DIR_IMAGE` afterwards. :term:`DESCRIPTION` The package description used by package managers. If not set, - ``DESCRIPTION`` takes the value of the :term:`SUMMARY` + :term:`DESCRIPTION` takes the value of the :term:`SUMMARY` variable. :term:`DISTRO` @@ -1816,27 +1769,26 @@ system and gives an overview of their function and contents. of the distribution, see the :term:`DISTRO_NAME` variable. - The ``DISTRO`` variable corresponds to a distribution configuration + The :term:`DISTRO` variable corresponds to a distribution configuration file whose root name is the same as the variable's argument and whose filename extension is ``.conf``. For example, the distribution configuration file for the Poky distribution is named ``poky.conf`` and resides in the ``meta-poky/conf/distro`` directory of the :term:`Source Directory`. - Within that ``poky.conf`` file, the ``DISTRO`` variable is set as - follows: - :: + Within that ``poky.conf`` file, the :term:`DISTRO` variable is set as + follows:: DISTRO = "poky" Distribution configuration files are located in a ``conf/distro`` directory within the :term:`Metadata` that contains the - distribution configuration. The value for ``DISTRO`` must not contain + distribution configuration. The value for :term:`DISTRO` must not contain spaces, and is typically all lower-case. .. note:: - If the ``DISTRO`` variable is blank, a set of default configurations + If the :term:`DISTRO` variable is blank, a set of default configurations are used, which are specified within ``meta/conf/distro/defaultsetup.conf`` also in the Source Directory. @@ -1863,11 +1815,11 @@ system and gives an overview of their function and contents. configuration file. In most cases, the presence or absence of a feature in - ``DISTRO_FEATURES`` is translated to the appropriate option supplied + :term:`DISTRO_FEATURES` is translated to the appropriate option supplied to the configure script during the :ref:`ref-tasks-configure` task for recipes that optionally support the feature. For example, specifying "x11" in - ``DISTRO_FEATURES``, causes every piece of software built for the + :term:`DISTRO_FEATURES`, causes every piece of software built for the target that can optionally support X11 to have its X11 support enabled. @@ -1876,8 +1828,8 @@ system and gives an overview of their function and contents. provide with this variable, see the ":ref:`ref-features-distro`" section. :term:`DISTRO_FEATURES_BACKFILL` - Features to be added to ``DISTRO_FEATURES`` if not also present in - ``DISTRO_FEATURES_BACKFILL_CONSIDERED``. + Features to be added to :term:`DISTRO_FEATURES` if not also present in + :term:`DISTRO_FEATURES_BACKFILL_CONSIDERED`. This variable is set in the ``meta/conf/bitbake.conf`` file. It is not intended to be user-configurable. It is best to just reference @@ -1886,8 +1838,8 @@ system and gives an overview of their function and contents. for more information. :term:`DISTRO_FEATURES_BACKFILL_CONSIDERED` - Features from ``DISTRO_FEATURES_BACKFILL`` that should not be - backfilled (i.e. added to ``DISTRO_FEATURES``) during the build. See + Features from :term:`DISTRO_FEATURES_BACKFILL` that should not be + backfilled (i.e. added to :term:`DISTRO_FEATURES`) during the build. See the ":ref:`ref-features-backfill`" section for more information. :term:`DISTRO_FEATURES_DEFAULT` @@ -1899,15 +1851,14 @@ system and gives an overview of their function and contents. able to reuse the default :term:`DISTRO_FEATURES` options without the need to write out the full set. Here is an example that uses - ``DISTRO_FEATURES_DEFAULT`` from a custom distro configuration file: - :: + :term:`DISTRO_FEATURES_DEFAULT` from a custom distro configuration file:: DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} myfeature" :term:`DISTRO_FEATURES_FILTER_NATIVE` Specifies a list of features that if present in the target :term:`DISTRO_FEATURES` value should be - included in ``DISTRO_FEATURES`` when building native recipes. This + included in :term:`DISTRO_FEATURES` when building native recipes. This variable is used in addition to the features filtered using the :term:`DISTRO_FEATURES_NATIVE` variable. @@ -1915,7 +1866,7 @@ system and gives an overview of their function and contents. :term:`DISTRO_FEATURES_FILTER_NATIVESDK` Specifies a list of features that if present in the target :term:`DISTRO_FEATURES` value should be - included in ``DISTRO_FEATURES`` when building nativesdk recipes. This + included in :term:`DISTRO_FEATURES` when building nativesdk recipes. This variable is used in addition to the features filtered using the :term:`DISTRO_FEATURES_NATIVESDK` variable. @@ -1940,16 +1891,15 @@ system and gives an overview of their function and contents. The long name of the distribution. For information on the short name of the distribution, see the :term:`DISTRO` variable. - The ``DISTRO_NAME`` variable corresponds to a distribution + The :term:`DISTRO_NAME` variable corresponds to a distribution configuration file whose root name is the same as the variable's argument and whose filename extension is ``.conf``. For example, the distribution configuration file for the Poky distribution is named ``poky.conf`` and resides in the ``meta-poky/conf/distro`` directory of the :term:`Source Directory`. - Within that ``poky.conf`` file, the ``DISTRO_NAME`` variable is set - as follows: - :: + Within that ``poky.conf`` file, the :term:`DISTRO_NAME` variable is set + as follows:: DISTRO_NAME = "Poky (Yocto Project Reference Distro)" @@ -1959,7 +1909,7 @@ system and gives an overview of their function and contents. .. note:: - If the ``DISTRO_NAME`` variable is blank, a set of default + If the :term:`DISTRO_NAME` variable is blank, a set of default configurations are used, which are specified within ``meta/conf/distro/defaultsetup.conf`` also in the Source Directory. @@ -1971,10 +1921,10 @@ system and gives an overview of their function and contents. distribution. By default, this list includes the value of :term:`DISTRO`. - You can extend ``DISTROOVERRIDES`` to add extra overrides that should + You can extend :term:`DISTROOVERRIDES` to add extra overrides that should apply to the distribution. - The underlying mechanism behind ``DISTROOVERRIDES`` is simply that it + The underlying mechanism behind :term:`DISTROOVERRIDES` is simply that it is included in the default value of :term:`OVERRIDES`. @@ -1993,13 +1943,13 @@ system and gives an overview of their function and contents. :term:`DL_DIR` The central download directory used by the build process to store - downloads. By default, ``DL_DIR`` gets files suitable for mirroring + downloads. By default, :term:`DL_DIR` gets files suitable for mirroring for everything except Git repositories. If you want tarballs of Git repositories, use the :term:`BB_GENERATE_MIRROR_TARBALLS` variable. - You can set this directory by defining the ``DL_DIR`` variable in the + You can set this directory by defining the :term:`DL_DIR` variable in the ``conf/local.conf`` file. This directory is self-maintaining and you should not have to touch it. By default, the directory is ``downloads`` in the :term:`Build Directory`. @@ -2013,7 +1963,7 @@ system and gives an overview of their function and contents. During a first build, the system downloads many different source code tarballs from various upstream projects. Downloading can take a while, particularly if your network connection is slow. Tarballs are - all stored in the directory defined by ``DL_DIR`` and the build + all stored in the directory defined by :term:`DL_DIR` and the build system looks there first to find source tarballs. .. note:: @@ -2042,7 +1992,7 @@ system and gives an overview of their function and contents. :term:`EFI_PROVIDER` When building bootable images (i.e. where ``hddimg``, ``iso``, or ``wic.vmdk`` is in :term:`IMAGE_FSTYPES`), the - ``EFI_PROVIDER`` variable specifies the EFI bootloader to use. The + :term:`EFI_PROVIDER` variable specifies the EFI bootloader to use. The default is "grub-efi", but "systemd-boot" can be used instead. See the :ref:`systemd-boot <ref-classes-systemd-boot>` and @@ -2063,10 +2013,9 @@ system and gives an overview of their function and contents. database. By default, the value of this variable is ``${``\ :term:`LOG_DIR`\ ``}/error-report``. - You can set ``ERR_REPORT_DIR`` to the path you want the error + You can set :term:`ERR_REPORT_DIR` to the path you want the error reporting tool to store the debug files as follows in your - ``local.conf`` file: - :: + ``local.conf`` file:: ERR_REPORT_DIR = "path" @@ -2089,13 +2038,12 @@ system and gives an overview of their function and contents. libraries resolver might implicitly define some dependencies between packages. - The ``EXCLUDE_FROM_SHLIBS`` variable is similar to the + The :term:`EXCLUDE_FROM_SHLIBS` variable is similar to the :term:`PRIVATE_LIBS` variable, which excludes a package's particular libraries only and not the whole package. - Use the ``EXCLUDE_FROM_SHLIBS`` variable by setting it to "1" for a - particular package: - :: + Use the :term:`EXCLUDE_FROM_SHLIBS` variable by setting it to "1" for a + particular package:: EXCLUDE_FROM_SHLIBS = "1" @@ -2110,18 +2058,18 @@ system and gives an overview of their function and contents. .. note:: - Recipes added to ``EXCLUDE_FROM_WORLD`` may still be built during a + Recipes added to :term:`EXCLUDE_FROM_WORLD` may still be built during a world build in order to satisfy dependencies of other recipes. Adding - a recipe to ``EXCLUDE_FROM_WORLD`` only ensures that the recipe is not + a recipe to :term:`EXCLUDE_FROM_WORLD` only ensures that the recipe is not explicitly added to the list of build targets in a world build. :term:`EXTENDPE` Used with file and pathnames to create a prefix for a recipe's - version based on the recipe's :term:`PE` value. If ``PE`` - is set and greater than zero for a recipe, ``EXTENDPE`` becomes that - value (e.g if ``PE`` is equal to "1" then ``EXTENDPE`` becomes "1"). - If a recipe's ``PE`` is not set (the default) or is equal to zero, - ``EXTENDPE`` becomes "". + version based on the recipe's :term:`PE` value. If :term:`PE` + is set and greater than zero for a recipe, :term:`EXTENDPE` becomes that + value (e.g if :term:`PE` is equal to "1" then :term:`EXTENDPE` becomes "1"). + If a recipe's :term:`PE` is not set (the default) or is equal to zero, + :term:`EXTENDPE` becomes "". See the :term:`STAMP` variable for an example. @@ -2129,8 +2077,7 @@ system and gives an overview of their function and contents. The full package version specification as it appears on the final packages produced by a recipe. The variable's value is normally used to fix a runtime dependency to the exact same version of another - package in the same recipe: - :: + package in the same recipe:: RDEPENDS_${PN}-additional-module = "${PN} (= ${EXTENDPKGV})" @@ -2138,11 +2085,11 @@ system and gives an overview of their function and contents. manager to upgrade these types of packages in lock-step. :term:`EXTERNAL_KERNEL_TOOLS` - When set, the ``EXTERNAL_KERNEL_TOOLS`` variable indicates that these + When set, the :term:`EXTERNAL_KERNEL_TOOLS` variable indicates that these tools are not in the source tree. When kernel tools are available in the tree, they are preferred over - any externally installed tools. Setting the ``EXTERNAL_KERNEL_TOOLS`` + any externally installed tools. Setting the :term:`EXTERNAL_KERNEL_TOOLS` variable tells the OpenEmbedded build system to prefer the installed external tools. See the :ref:`kernel-yocto <ref-classes-kernel-yocto>` class in @@ -2177,7 +2124,7 @@ system and gives an overview of their function and contents. :term:`EXTRA_AUTORECONF` For recipes inheriting the :ref:`autotools <ref-classes-autotools>` - class, you can use ``EXTRA_AUTORECONF`` to specify extra options to + class, you can use :term:`EXTRA_AUTORECONF` to specify extra options to pass to the ``autoreconf`` command that is executed during the :ref:`ref-tasks-configure` task. @@ -2230,8 +2177,7 @@ system and gives an overview of their function and contents. Specifies additional options for the image creation command that has been specified in :term:`IMAGE_CMD`. When setting this variable, use an override for the associated image type. Here is - an example: - :: + an example:: EXTRA_IMAGECMD_ext3 ?= "-i 4096" @@ -2240,7 +2186,7 @@ system and gives an overview of their function and contents. installing into the root filesystem. Sometimes a recipe is required to build the final image but is not - needed in the root filesystem. You can use the ``EXTRA_IMAGEDEPENDS`` + needed in the root filesystem. You can use the :term:`EXTRA_IMAGEDEPENDS` variable to list these recipes and thus specify the dependencies. A typical example is a required bootloader in a machine configuration. @@ -2255,8 +2201,7 @@ system and gives an overview of their function and contents. added to the beginning of the environment variable ``PATH``. As an example, the following prepends "${STAGING_BINDIR_NATIVE}/foo:${STAGING_BINDIR_NATIVE}/bar:" to - ``PATH``: - :: + ``PATH``:: EXTRANATIVEPATH = "foo bar" @@ -2272,12 +2217,12 @@ system and gives an overview of their function and contents. :term:`EXTRA_OEMAKE` Additional GNU ``make`` options. - Because the ``EXTRA_OEMAKE`` defaults to "", you need to set the + Because the :term:`EXTRA_OEMAKE` defaults to "", you need to set the variable to specify any required GNU options. :term:`PARALLEL_MAKE` and :term:`PARALLEL_MAKEINST` also make use of - ``EXTRA_OEMAKE`` to pass the required flags. + :term:`EXTRA_OEMAKE` to pass the required flags. :term:`EXTRA_OESCONS` When inheriting the :ref:`scons <ref-classes-scons>` class, this @@ -2293,9 +2238,8 @@ system and gives an overview of their function and contents. group configurations to a specific recipe. The set list of commands you can configure using the - ``EXTRA_USERS_PARAMS`` is shown in the ``extrausers`` class. These - commands map to the normal Unix commands of the same names: - :: + :term:`EXTRA_USERS_PARAMS` is shown in the ``extrausers`` class. These + commands map to the normal Unix commands of the same names:: # EXTRA_USERS_PARAMS = "\ # useradd -p '' tester; \ @@ -2320,20 +2264,19 @@ system and gives an overview of their function and contents. :term:`FEATURE_PACKAGES` Defines one or more packages to include in an image when a specific item is included in :term:`IMAGE_FEATURES`. - When setting the value, ``FEATURE_PACKAGES`` should have the name of - the feature item as an override. Here is an example: - :: + When setting the value, :term:`FEATURE_PACKAGES` should have the name of + the feature item as an override. Here is an example:: FEATURE_PACKAGES_widget = "package1 package2" - In this example, if "widget" were added to ``IMAGE_FEATURES``, + In this example, if "widget" were added to :term:`IMAGE_FEATURES`, package1 and package2 would be included in the image. .. note:: - Packages installed by features defined through ``FEATURE_PACKAGES`` + Packages installed by features defined through :term:`FEATURE_PACKAGES` are often package groups. While similarly named, you should not - confuse the ``FEATURE_PACKAGES`` variable with package groups, which + confuse the :term:`FEATURE_PACKAGES` variable with package groups, which are discussed elsewhere in the documentation. :term:`FEED_DEPLOYDIR_BASE_URI` @@ -2342,8 +2285,7 @@ system and gives an overview of their function and contents. OPKG to support runtime package management of IPK packages. You set this variable in your ``local.conf`` file. - Consider the following example: - :: + Consider the following example:: FEED_DEPLOYDIR_BASE_URI = "http://192.168.7.1/BOARD-dir" @@ -2359,11 +2301,10 @@ system and gives an overview of their function and contents. :term:`PACKAGES` variable lists the packages generated by a recipe. - To use the ``FILES`` variable, provide a package name override that + To use the :term:`FILES` variable, provide a package name override that identifies the resulting package. Then, provide a space-separated list of files or paths that identify the files you want included as - part of the resulting package. Here is an example: - :: + part of the resulting package. Here is an example:: FILES_${PN} += "${bindir}/mydir1 ${bindir}/mydir2/myfile" @@ -2375,7 +2316,7 @@ system and gives an overview of their function and contents. syntax. For details on the syntax, see the documentation by following the previous link. - - When specifying paths as part of the ``FILES`` variable, it is + - When specifying paths as part of the :term:`FILES` variable, it is good practice to use appropriate path variables. For example, use ``${sysconfdir}`` rather than ``/etc``, or ``${bindir}`` rather than ``/usr/bin``. You can find a list of these @@ -2384,7 +2325,7 @@ system and gives an overview of their function and contents. find the default values of the various ``FILES_*`` variables in this file. - If some of the files you provide with the ``FILES`` variable are + If some of the files you provide with the :term:`FILES` variable are editable and you know they should not be overwritten during the package update process by the Package Management System (PMS), you can identify these files so that the PMS will not overwrite them. See @@ -2394,12 +2335,11 @@ system and gives an overview of their function and contents. :term:`FILES_SOLIBSDEV` Defines the file specification to match :term:`SOLIBSDEV`. In other words, - ``FILES_SOLIBSDEV`` defines the full path name of the development + :term:`FILES_SOLIBSDEV` defines the full path name of the development symbolic link (symlink) for shared libraries on the target platform. The following statement from the ``bitbake.conf`` shows how it is - set: - :: + set:: FILES_SOLIBSDEV ?= "${base_libdir}/lib*${SOLIBSDEV} ${libdir}/lib*${SOLIBSDEV}" @@ -2408,13 +2348,12 @@ system and gives an overview of their function and contents. looking for files and patches as it processes recipes and append files. The default directories BitBake uses when it processes recipes are initially defined by the :term:`FILESPATH` - variable. You can extend ``FILESPATH`` variable by using - ``FILESEXTRAPATHS``. + variable. You can extend :term:`FILESPATH` variable by using + :term:`FILESEXTRAPATHS`. Best practices dictate that you accomplish this by using - ``FILESEXTRAPATHS`` from within a ``.bbappend`` file and that you - prepend paths as follows: - :: + :term:`FILESEXTRAPATHS` from within a ``.bbappend`` file and that you + prepend paths as follows:: FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" @@ -2424,7 +2363,7 @@ system and gives an overview of their function and contents. .. note:: - When extending ``FILESEXTRAPATHS``, be sure to use the immediate + When extending :term:`FILESEXTRAPATHS`, be sure to use the immediate expansion (``:=``) operator. Immediate expansion makes sure that BitBake evaluates :term:`THISDIR` at the time the directive is encountered rather than at some later time when @@ -2436,24 +2375,21 @@ system and gives an overview of their function and contents. are directing BitBake to extend the path by prepending directories to the search path. - Here is another common use: - :: + Here is another common use:: FILESEXTRAPATHS_prepend := "${THISDIR}/files:" In this example, the build system extends the - ``FILESPATH`` variable to include a directory named ``files`` that is + :term:`FILESPATH` variable to include a directory named ``files`` that is in the same directory as the corresponding append file. - This next example specifically adds three paths: - :: + This next example specifically adds three paths:: FILESEXTRAPATHS_prepend := "path_1:path_2:path_3:" A final example shows how you can extend the search path and include a :term:`MACHINE`-specific override, which is useful - in a BSP layer: - :: + in a BSP layer:: FILESEXTRAPATHS_prepend_intel-x86-common := "${THISDIR}/${PN}:" @@ -2467,7 +2403,7 @@ system and gives an overview of their function and contents. .. note:: For a layer that supports a single BSP, the override could just be - the value of ``MACHINE``. + the value of :term:`MACHINE`. By prepending paths in ``.bbappend`` files, you allow multiple append files that reside in different layers but are used for the same @@ -2476,7 +2412,7 @@ system and gives an overview of their function and contents. :term:`FILESOVERRIDES` A subset of :term:`OVERRIDES` used by the OpenEmbedded build system for creating - :term:`FILESPATH`. The ``FILESOVERRIDES`` variable + :term:`FILESPATH`. The :term:`FILESOVERRIDES` variable uses overrides to automatically extend the :term:`FILESPATH` variable. For an example of how that works, see the :term:`FILESPATH` variable @@ -2485,14 +2421,13 @@ system and gives an overview of their function and contents. ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:conditional syntax (overrides)`" section of the BitBake User Manual. - By default, the ``FILESOVERRIDES`` variable is defined as: - :: + By default, the :term:`FILESOVERRIDES` variable is defined as:: FILESOVERRIDES = "${TRANSLATED_TARGET_ARCH}:${MACHINEOVERRIDES}:${DISTROOVERRIDES}" .. note:: - Do not hand-edit the ``FILESOVERRIDES`` variable. The values match up + Do not hand-edit the :term:`FILESOVERRIDES` variable. The values match up with expected overrides and are used in an expected manner by the build system. @@ -2501,49 +2436,47 @@ system and gives an overview of their function and contents. when searching for patches and files. During the build process, BitBake searches each directory in - ``FILESPATH`` in the specified order when looking for files and + :term:`FILESPATH` in the specified order when looking for files and patches specified by each ``file://`` URI in a recipe's :term:`SRC_URI` statements. - The default value for the ``FILESPATH`` variable is defined in the + The default value for the :term:`FILESPATH` variable is defined in the ``base.bbclass`` class found in ``meta/classes`` in the - :term:`Source Directory`: - :: + :term:`Source Directory`:: FILESPATH = "${@base_set_filespath(["${FILE_DIRNAME}/${BP}", \ "${FILE_DIRNAME}/${BPN}", "${FILE_DIRNAME}/files"], d)}" The - ``FILESPATH`` variable is automatically extended using the overrides + :term:`FILESPATH` variable is automatically extended using the overrides from the :term:`FILESOVERRIDES` variable. .. note:: - - Do not hand-edit the ``FILESPATH`` variable. If you want the + - Do not hand-edit the :term:`FILESPATH` variable. If you want the build system to look in directories other than the defaults, - extend the ``FILESPATH`` variable by using the + extend the :term:`FILESPATH` variable by using the :term:`FILESEXTRAPATHS` variable. - - Be aware that the default ``FILESPATH`` directories do not map + - Be aware that the default :term:`FILESPATH` directories do not map to directories in custom layers where append files (``.bbappend``) are used. If you want the build system to find patches or files that reside with your append files, you need - to extend the ``FILESPATH`` variable by using the - ``FILESEXTRAPATHS`` variable. + to extend the :term:`FILESPATH` variable by using the + :term:`FILESEXTRAPATHS` variable. You can take advantage of this searching behavior in useful ways. For - example, consider a case where the following directory structure - exists for general and machine-specific configurations: - :: + example, consider a case where there is the following directory structure + for general and machine-specific configurations:: files/defconfig files/MACHINEA/defconfig files/MACHINEB/defconfig - Also in the example, the ``SRC_URI`` statement contains + Also in the example, the :term:`SRC_URI` statement contains "file://defconfig". Given this scenario, you can set :term:`MACHINE` to "MACHINEA" and cause the build - system to use files from ``files/MACHINEA``. Set ``MACHINE`` to + system to use files from ``files/MACHINEA``. Set :term:`MACHINE` to "MACHINEB" and the build system uses files from ``files/MACHINEB``. Finally, for any machine other than "MACHINEA" and "MACHINEB", the build system uses files from ``files/defconfig``. @@ -2568,7 +2501,7 @@ system and gives an overview of their function and contents. permissions setting table, you should place it in your layer or the distro's layer. - You define the ``FILESYSTEM_PERMS_TABLES`` variable in the + You define the :term:`FILESYSTEM_PERMS_TABLES` variable in the ``conf/local.conf`` file, which is found in the :term:`Build Directory`, to point to your custom ``fs-perms.txt``. You can specify more than a single file permissions @@ -2587,7 +2520,7 @@ system and gives an overview of their function and contents. :term:`FIT_GENERATE_KEYS` Decides whether to generate the keys for signing fitImage if they - don't already exist. The keys are created in ``UBOOT_SIGN_KEYDIR``. + don't already exist. The keys are created in :term:`UBOOT_SIGN_KEYDIR`. The default value is 0. :term:`FIT_HASH_ALG` @@ -2652,7 +2585,7 @@ system and gives an overview of their function and contents. Set the variable to "1" to force the removal of these packages. :term:`FULL_OPTIMIZATION` - The options to pass in ``TARGET_CFLAGS`` and ``CFLAGS`` when + The options to pass in :term:`TARGET_CFLAGS` and :term:`CFLAGS` when compiling an optimized system. This variable defaults to "-O2 -pipe ${DEBUG_FLAGS}". @@ -2662,16 +2595,14 @@ system and gives an overview of their function and contents. Programming (ROP) attacks much more difficult to execute. By default the ``security_flags.inc`` file enables PIE by setting the - variable as follows: - :: + variable as follows:: GCCPIE ?= "--enable-default-pie" :term:`GCCVERSION` Specifies the default version of the GNU C Compiler (GCC) used for - compilation. By default, ``GCCVERSION`` is set to "8.x" in the - ``meta/conf/distro/include/tcmode-default.inc`` include file: - :: + compilation. By default, :term:`GCCVERSION` is set to "8.x" in the + ``meta/conf/distro/include/tcmode-default.inc`` include file:: GCCVERSION ?= "8.%" @@ -2694,7 +2625,7 @@ system and gives an overview of their function and contents. If you specifically remove the locale ``en_US.UTF-8``, you must set :term:`IMAGE_LINGUAS` appropriately. - You can set ``GLIBC_GENERATE_LOCALES`` in your ``local.conf`` file. + You can set :term:`GLIBC_GENERATE_LOCALES` in your ``local.conf`` file. By default, all locales are generated. :: @@ -2706,8 +2637,7 @@ system and gives an overview of their function and contents. passed to the ``groupadd`` command if you wish to add a group to the system when the package is installed. - Here is an example from the ``dbus`` recipe: - :: + Here is an example from the ``dbus`` recipe:: GROUPADD_PARAM_${PN} = "-r netdev" @@ -2737,7 +2667,7 @@ system and gives an overview of their function and contents. configuration. Use a semi-colon character (``;``) to separate multiple options. - The ``GRUB_OPTS`` variable is optional. See the + The :term:`GRUB_OPTS` variable is optional. See the :ref:`grub-efi <ref-classes-grub-efi>` class for more information on how this variable is used. @@ -2745,7 +2675,7 @@ system and gives an overview of their function and contents. Specifies the timeout before executing the default ``LABEL`` in the GNU GRand Unified Bootloader (GRUB). - The ``GRUB_TIMEOUT`` variable is optional. See the + The :term:`GRUB_TIMEOUT` variable is optional. See the :ref:`grub-efi <ref-classes-grub-efi>` class for more information on how this variable is used. @@ -2779,7 +2709,7 @@ system and gives an overview of their function and contents. Specifies architecture-specific compiler flags that are passed to the C compiler. - Default initialization for ``HOST_CC_ARCH`` varies depending on what + Default initialization for :term:`HOST_CC_ARCH` varies depending on what is being built: - :term:`TARGET_CC_ARCH` when building for the @@ -2799,7 +2729,7 @@ system and gives an overview of their function and contents. "linux-musleabi" values possible. :term:`HOST_PREFIX` - Specifies the prefix for the cross-compile toolchain. ``HOST_PREFIX`` + Specifies the prefix for the cross-compile toolchain. :term:`HOST_PREFIX` is normally the same as :term:`TARGET_PREFIX`. :term:`HOST_SYS` @@ -2828,7 +2758,7 @@ system and gives an overview of their function and contents. A space-separated list (filter) of tools on the build host that should be allowed to be called from within build tasks. Using this filter helps reduce the possibility of host contamination. If a tool - specified in the value of ``HOSTTOOLS`` is not found on the build + specified in the value of :term:`HOSTTOOLS` is not found on the build host, the OpenEmbedded build system produces an error and the build is not started. @@ -2841,11 +2771,11 @@ system and gives an overview of their function and contents. filter helps reduce the possibility of host contamination. Unlike :term:`HOSTTOOLS`, the OpenEmbedded build system does not produce an error if a tool specified in the value of - ``HOSTTOOLS_NONFATAL`` is not found on the build host. Thus, you can - use ``HOSTTOOLS_NONFATAL`` to filter optional host tools. + :term:`HOSTTOOLS_NONFATAL` is not found on the build host. Thus, you can + use :term:`HOSTTOOLS_NONFATAL` to filter optional host tools. :term:`HOST_VENDOR` - Specifies the name of the vendor. ``HOST_VENDOR`` is normally the + Specifies the name of the vendor. :term:`HOST_VENDOR` is normally the same as :term:`TARGET_VENDOR`. :term:`ICECC_DISABLED` @@ -2855,13 +2785,11 @@ system and gives an overview of their function and contents. section. Setting this variable to "1" in your ``local.conf`` disables the - function: - :: + function:: ICECC_DISABLED ??= "1" - To enable the function, set the variable as follows: - :: + To enable the function, set the variable as follows:: ICECC_DISABLED = "" @@ -2892,12 +2820,12 @@ system and gives an overview of their function and contents. network lag, available memory, and existing machine loads can all affect build time. Consequently, unlike the :term:`PARALLEL_MAKE` variable, there is no - rule-of-thumb for setting ``ICECC_PARALLEL_MAKE`` to achieve optimal + rule-of-thumb for setting :term:`ICECC_PARALLEL_MAKE` to achieve optimal performance. - If you do not set ``ICECC_PARALLEL_MAKE``, the build system does not + If you do not set :term:`ICECC_PARALLEL_MAKE`, the build system does not use it (i.e. the system does not detect and assign the number of - cores as is done with ``PARALLEL_MAKE``). + cores as is done with :term:`PARALLEL_MAKE`). :term:`ICECC_PATH` The location of the ``icecc`` binary. You can set this variable in @@ -2946,8 +2874,7 @@ system and gives an overview of their function and contents. installed name, separate it from the original name with a semi-colon (;). Source files need to be located in :term:`DEPLOY_DIR_IMAGE`. Here are two - examples: - :: + examples:: IMAGE_EFI_BOOT_FILES = "${KERNEL_IMAGETYPE};bz2" IMAGE_EFI_BOOT_FILES = "${KERNEL_IMAGETYPE} microcode.cpio" @@ -2956,8 +2883,7 @@ system and gives an overview of their function and contents. this case, the destination file must have the same name as the base name of the source file path. To install files into a directory within the target location, pass its name after a semi-colon (;). - Here are two examples: - :: + Here are two examples:: IMAGE_EFI_BOOT_FILES = "boot/loader/*" IMAGE_EFI_BOOT_FILES = "boot/loader/*;boot/" @@ -2982,8 +2908,7 @@ system and gives an overview of their function and contents. installed name, separate it from the original name with a semi-colon (;). Source files need to be located in :term:`DEPLOY_DIR_IMAGE`. Here are two - examples: - :: + examples:: IMAGE_BOOT_FILES = "u-boot.img uImage;kernel" IMAGE_BOOT_FILES = "u-boot.${UBOOT_SUFFIX} ${KERNEL_IMAGETYPE}" @@ -2992,8 +2917,7 @@ system and gives an overview of their function and contents. this case, the destination file must have the same name as the base name of the source file path. To install files into a directory within the target location, pass its name after a semi-colon (;). - Here are two examples: - :: + Here are two examples:: IMAGE_BOOT_FILES = "bcm2835-bootfiles/*" IMAGE_BOOT_FILES = "bcm2835-bootfiles/*;boot/" @@ -3014,7 +2938,7 @@ system and gives an overview of their function and contents. this variable to specify the list of classes that register the different types of images the OpenEmbedded build system creates. - The default value for ``IMAGE_CLASSES`` is ``image_types``. You can + The default value for :term:`IMAGE_CLASSES` is ``image_types``. You can set this variable in your ``local.conf`` or in a distribution configuration file. @@ -3026,11 +2950,10 @@ system and gives an overview of their function and contents. type, which corresponds to the value set in :term:`IMAGE_FSTYPES`, (e.g. ``ext3``, ``btrfs``, and so forth). When setting this variable, you should use - an override for the associated type. Here is an example: - :: + an override for the associated type. Here is an example:: - IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} \ - --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \ + IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \ + --output=${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.jffs2 \ ${EXTRA_IMAGECMD}" You typically do not need to set this variable unless you are adding @@ -3042,7 +2965,7 @@ system and gives an overview of their function and contents. Specifies one or more files that contain custom device tables that are passed to the ``makedevs`` command as part of creating an image. These files list basic device nodes that should be created under - ``/dev`` within the image. If ``IMAGE_DEVICE_TABLES`` is not set, + ``/dev`` within the image. If :term:`IMAGE_DEVICE_TABLES` is not set, ``files/device_table-minimal.txt`` is used, which is located by :term:`BBPATH`. For details on how you should write device table files, see ``meta/files/device_table-minimal.txt`` as an @@ -3070,9 +2993,8 @@ system and gives an overview of their function and contents. :term:`IMAGE_FSTYPES` Specifies the formats the OpenEmbedded build system uses during the build when creating the root filesystem. For example, setting - ``IMAGE_FSTYPES`` as follows causes the build system to create root - filesystems using two formats: ``.ext3`` and ``.tar.bz2``: - :: + :term:`IMAGE_FSTYPES` as follows causes the build system to create root + filesystems using two formats: ``.ext3`` and ``.tar.bz2``:: IMAGE_FSTYPES = "ext3 tar.bz2" @@ -3082,29 +3004,28 @@ system and gives an overview of their function and contents. .. note:: - If an image recipe uses the "inherit image" line and you are - setting ``IMAGE_FSTYPES`` inside the recipe, you must set + setting :term:`IMAGE_FSTYPES` inside the recipe, you must set ``IMAGE_FSTYPES`` prior to using the "inherit image" line. - Due to the way the OpenEmbedded build system processes this variable, you cannot update its contents by using ``_append`` or ``_prepend``. You must use the ``+=`` operator to add one or - more options to the ``IMAGE_FSTYPES`` variable. + more options to the :term:`IMAGE_FSTYPES` variable. :term:`IMAGE_INSTALL` Used by recipes to specify the packages to install into an image through the :ref:`image <ref-classes-image>` class. Use the - ``IMAGE_INSTALL`` variable with care to avoid ordering issues. + :term:`IMAGE_INSTALL` variable with care to avoid ordering issues. - Image recipes set ``IMAGE_INSTALL`` to specify the packages to + Image recipes set :term:`IMAGE_INSTALL` to specify the packages to install into an image through ``image.bbclass``. Additionally, - "helper" classes such as the - :ref:`core-image <ref-classes-core-image>` class exist that can - take lists used with ``IMAGE_FEATURES`` and turn them into - auto-generated entries in ``IMAGE_INSTALL`` in addition to its + there are "helper" classes such as the + :ref:`core-image <ref-classes-core-image>` class which can + take lists used with :term:`IMAGE_FEATURES` and turn them into + auto-generated entries in :term:`IMAGE_INSTALL` in addition to its default contents. - When you use this variable, it is best to use it as follows: - :: + When you use this variable, it is best to use it as follows:: IMAGE_INSTALL_append = " package-name" @@ -3116,24 +3037,24 @@ system and gives an overview of their function and contents. - When working with a :ref:`core-image-minimal-initramfs <ref-manual/images:images>` - image, do not use the ``IMAGE_INSTALL`` variable to specify + image, do not use the :term:`IMAGE_INSTALL` variable to specify packages for installation. Instead, use the :term:`PACKAGE_INSTALL` variable, which allows the initial RAM filesystem (initramfs) recipe to use a - fixed set of packages and not be affected by ``IMAGE_INSTALL``. + fixed set of packages and not be affected by :term:`IMAGE_INSTALL`. For information on creating an initramfs, see the ":ref:`dev-manual/common-tasks:building an initial ram filesystem (initramfs) image`" section in the Yocto Project Development Tasks Manual. - - Using ``IMAGE_INSTALL`` with the + - Using :term:`IMAGE_INSTALL` with the :ref:`+= <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:appending (+=) and prepending (=+) with spaces>` BitBake operator within the ``/conf/local.conf`` file or from within an image recipe is not recommended. Use of this operator in these ways can cause ordering issues. Since - ``core-image.bbclass`` sets ``IMAGE_INSTALL`` to a default + ``core-image.bbclass`` sets :term:`IMAGE_INSTALL` to a default value using the :ref:`?= <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:setting a default value (?=)>` - operator, using a ``+=`` operation against ``IMAGE_INSTALL`` + operator, using a ``+=`` operation against :term:`IMAGE_INSTALL` results in unexpected behavior when used within ``conf/local.conf``. Furthermore, the same operation from within an image recipe may or may not succeed depending on the @@ -3144,11 +3065,10 @@ system and gives an overview of their function and contents. Specifies the list of locales to install into the image during the root filesystem construction process. The OpenEmbedded build system automatically splits locale files, which are used for localization, - into separate packages. Setting the ``IMAGE_LINGUAS`` variable + into separate packages. Setting the :term:`IMAGE_LINGUAS` variable ensures that any locale packages that correspond to packages already selected for installation into the image are also installed. Here is - an example: - :: + an example:: IMAGE_LINGUAS = "pt-br de-de" @@ -3167,8 +3087,7 @@ system and gives an overview of their function and contents. The name of the output image symlink (which does not include the version part as :term:`IMAGE_NAME` does). The default value is derived using the :term:`IMAGE_BASENAME` and :term:`MACHINE` - variables: - :: + variables:: IMAGE_LINK_NAME ?= "${IMAGE_BASENAME}-${MACHINE}" @@ -3176,19 +3095,17 @@ system and gives an overview of their function and contents. :term:`IMAGE_MANIFEST` The manifest file for the image. This file lists all the installed packages that make up the image. The file contains package - information on a line-per-package basis as follows: - :: + information on a line-per-package basis as follows:: packagename packagearch version - The :ref:`image <ref-classes-image>` class defines the manifest - file as follows: - :: + The :ref:`rootfs-postcommands <ref-classes-rootfs*>` class defines the manifest + file as follows:: - IMAGE_MANIFEST ="${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.manifest" + IMAGE_MANIFEST ="${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.manifest" The location is - derived using the :term:`DEPLOY_DIR_IMAGE` + derived using the :term:`IMGDEPLOYDIR` and :term:`IMAGE_NAME` variables. You can find information on how the image is created in the ":ref:`overview-manual/concepts:image generation`" section in the Yocto Project Overview and Concepts Manual. @@ -3197,8 +3114,7 @@ system and gives an overview of their function and contents. The name of the output image files minus the extension. This variable is derived using the :term:`IMAGE_BASENAME`, :term:`MACHINE`, and :term:`IMAGE_VERSION_SUFFIX` - variables: - :: + variables:: IMAGE_NAME ?= "${IMAGE_BASENAME}-${MACHINE}${IMAGE_VERSION_SUFFIX}" @@ -3213,7 +3129,7 @@ system and gives an overview of their function and contents. Defines a multiplier that the build system applies to the initial image size for cases when the multiplier times the returned disk usage value for the image is greater than the sum of - ``IMAGE_ROOTFS_SIZE`` and ``IMAGE_ROOTFS_EXTRA_SPACE``. The result of + :term:`IMAGE_ROOTFS_SIZE` and :term:`IMAGE_ROOTFS_EXTRA_SPACE`. The result of the multiplier applied to the initial image size creates free disk space in the image as overhead. By default, the build process uses a multiplier of 1.3 for this variable. This default value results in @@ -3222,20 +3138,19 @@ system and gives an overview of their function and contents. post install scripts and the package management system uses disk space inside this overhead area. Consequently, the multiplier does not produce an image with all the theoretical free disk space. See - ``IMAGE_ROOTFS_SIZE`` for information on how the build system + :term:`IMAGE_ROOTFS_SIZE` for information on how the build system determines the overall image size. The default 30% free disk space typically gives the image enough room to boot and allows for basic post installs while still leaving a small amount of free disk space. If 30% free space is inadequate, you can increase the default value. For example, the following setting - gives you 50% free space added to the image: - :: + gives you 50% free space added to the image:: IMAGE_OVERHEAD_FACTOR = "1.5" Alternatively, you can ensure a specific amount of free disk space is - added to the image by using the ``IMAGE_ROOTFS_EXTRA_SPACE`` + added to the image by using the :term:`IMAGE_ROOTFS_EXTRA_SPACE` variable. :term:`IMAGE_PKGTYPE` @@ -3252,10 +3167,10 @@ system and gives an overview of their function and contents. recommended that you do not use it. The :ref:`populate_sdk_* <ref-classes-populate-sdk-*>` and - :ref:`image <ref-classes-image>` classes use the ``IMAGE_PKGTYPE`` + :ref:`image <ref-classes-image>` classes use the :term:`IMAGE_PKGTYPE` for packaging up images and SDKs. - You should not set the ``IMAGE_PKGTYPE`` manually. Rather, the + You should not set the :term:`IMAGE_PKGTYPE` manually. Rather, the variable is set indirectly through the appropriate :ref:`package_* <ref-classes-package>` class using the :term:`PACKAGE_CLASSES` variable. The @@ -3271,8 +3186,7 @@ system and gives an overview of their function and contents. :term:`IMAGE_POSTPROCESS_COMMAND` Specifies a list of functions to call once the OpenEmbedded build system creates the final image output files. You can specify - functions separated by semicolons: - :: + functions separated by semicolons:: IMAGE_POSTPROCESS_COMMAND += "function; ... " @@ -3285,8 +3199,7 @@ system and gives an overview of their function and contents. :term:`IMAGE_PREPROCESS_COMMAND` Specifies a list of functions to call before the OpenEmbedded build system creates the final image output files. You can specify - functions separated by semicolons: - :: + functions separated by semicolons:: IMAGE_PREPROCESS_COMMAND += "function; ... " @@ -3312,19 +3225,17 @@ system and gives an overview of their function and contents. Defines additional free disk space created in the image in Kbytes. By default, this variable is set to "0". This free disk space is added to the image after the build system determines the image size as - described in ``IMAGE_ROOTFS_SIZE``. + described in :term:`IMAGE_ROOTFS_SIZE`. This variable is particularly useful when you want to ensure that a specific amount of free disk space is available on a device after an image is installed and running. For example, to be sure 5 Gbytes of - free disk space is available, set the variable as follows: - :: + free disk space is available, set the variable as follows:: IMAGE_ROOTFS_EXTRA_SPACE = "5242880" For example, the Yocto Project Build Appliance specifically requests - 40 Gbytes of extra space with the line: - :: + 40 Gbytes of extra space with the line:: IMAGE_ROOTFS_EXTRA_SPACE = "41943040" @@ -3335,8 +3246,7 @@ system and gives an overview of their function and contents. the generated image, a requested size for the image, and requested additional free disk space to be added to the image. Programatically, the build system determines the final size of the generated image as - follows: - :: + follows:: if (image-du * overhead) < rootfs-size: internal-rootfs-size = rootfs-size + xspace @@ -3355,8 +3265,7 @@ system and gives an overview of their function and contents. :term:`IMAGE_TYPEDEP` Specifies a dependency from one image type on another. Here is an - example from the :ref:`image-live <ref-classes-image-live>` class: - :: + example from the :ref:`image-live <ref-classes-image-live>` class:: IMAGE_TYPEDEP_live = "ext3" @@ -3377,6 +3286,9 @@ system and gives an overview of their function and contents. - cpio.lzma - cpio.xz - cramfs + - erofs + - erofs-lz4 + - erofs-lz4hc - ext2 - ext2.bz2 - ext2.gz @@ -3419,6 +3331,18 @@ system and gives an overview of their function and contents. desired, and this suffix would then be used consistently across the build artifacts. + :term:`IMGDEPLOYDIR` + When inheriting the :ref:`image <ref-classes-image>` class directly or + through the :ref:`core-image <ref-classes-core-image>` class, the + ``IMGDEPLOYDIR`` points to a temporary work area for deployed files + that is set in the ``image`` class as follows:: + + IMGDEPLOYDIR = "${WORKDIR}/deploy-${PN}-image-complete" + + Recipes inheriting the ``image`` class should copy files to be + deployed into ``IMGDEPLOYDIR``, and the class will take care of + copying them into :term:`DEPLOY_DIR_IMAGE` afterwards. + :term:`INC_PR` Helps define the recipe revision for recipes that share a common ``include`` file. You can think of this variable as part of the @@ -3434,17 +3358,16 @@ system and gives an overview of their function and contents. common functionality are upgraded to a new revision. A more efficient way of dealing with this situation is to set the - ``INC_PR`` variable inside the ``include`` files that the recipes - share and then expand the ``INC_PR`` variable within the recipes to + :term:`INC_PR` variable inside the ``include`` files that the recipes + share and then expand the :term:`INC_PR` variable within the recipes to help define the recipe revision. The following provides an example that shows how to use the - ``INC_PR`` variable given a common ``include`` file that defines the + :term:`INC_PR` variable given a common ``include`` file that defines the variable. Once the variable is defined in the ``include`` file, you - can use the variable to set the ``PR`` values in each recipe. You - will notice that when you set a recipe's ``PR`` you can provide more - granular revisioning by appending values to the ``INC_PR`` variable: - :: + can use the variable to set the :term:`PR` values in each recipe. You + will notice that when you set a recipe's :term:`PR` you can provide more + granular revisioning by appending values to the :term:`INC_PR` variable:: recipes-graphics/xorg-font/xorg-font-common.inc:INC_PR = "r2" recipes-graphics/xorg-font/encodings_1.0.4.bb:PR = "${INC_PR}.1" @@ -3455,7 +3378,7 @@ system and gives an overview of their function and contents. first line of the example establishes the baseline revision to be used for all recipes that use the ``include`` file. The remaining lines in the example are from individual recipes and show how the - ``PR`` value is set. + :term:`PR` value is set. :term:`INCOMPATIBLE_LICENSE` Specifies a space-separated list of license names (as they would @@ -3467,8 +3390,7 @@ system and gives an overview of their function and contents. .. note:: This functionality is only regularly tested using the following - setting: - :: + setting:: INCOMPATIBLE_LICENSE = "GPL-3.0 LGPL-3.0 AGPL-3.0" @@ -3482,13 +3404,12 @@ system and gives an overview of their function and contents. It is possible to define a list of licenses that are allowed to be used instead of the licenses that are excluded. To do this, define a variable ``COMPATIBLE_LICENSES`` with the names of the licenses - that are allowed. Then define ``INCOMPATIBLE_LICENSE`` as: - :: + that are allowed. Then define :term:`INCOMPATIBLE_LICENSE` as:: INCOMPATIBLE_LICENSE = "${@' '.join(sorted(set(d.getVar('AVAILABLE_LICENSES').split()) - set(d.getVar('COMPATIBLE_LICENSES').split())))}" - This will result in ``INCOMPATIBLE_LICENSE`` containing the names of + This will result in :term:`INCOMPATIBLE_LICENSE` containing the names of all licenses from :term:`AVAILABLE_LICENSES` except the ones specified in ``COMPATIBLE_LICENSES``, thus only allowing the latter licenses to be used. @@ -3497,9 +3418,9 @@ system and gives an overview of their function and contents. Causes the named class or classes to be inherited globally. Anonymous functions in the class or classes are not executed for the base configuration and in each individual recipe. The OpenEmbedded build - system ignores changes to ``INHERIT`` in individual recipes. + system ignores changes to :term:`INHERIT` in individual recipes. - For more information on ``INHERIT``, see the + For more information on :term:`INHERIT`, see the :ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:\`\`inherit\`\` configuration directive`" section in the Bitbake User Manual. @@ -3508,8 +3429,7 @@ system and gives an overview of their function and contents. unlikely that you want to edit this variable. The default value of the variable is set as follows in the - ``meta/conf/distro/defaultsetup.conf`` file: - :: + ``meta/conf/distro/defaultsetup.conf`` file:: INHERIT_DISTRO ?= "debian devshell sstate license" @@ -3532,9 +3452,8 @@ system and gives an overview of their function and contents. variable. To prevent the build system from splitting out debug information - during packaging, set the ``INHIBIT_PACKAGE_DEBUG_SPLIT`` variable as - follows: - :: + during packaging, set the :term:`INHIBIT_PACKAGE_DEBUG_SPLIT` variable as + follows:: INHIBIT_PACKAGE_DEBUG_SPLIT = "1" @@ -3545,7 +3464,7 @@ system and gives an overview of their function and contents. By default, the OpenEmbedded build system strips binaries and puts the debugging symbols into ``${``\ :term:`PN`\ ``}-dbg``. - Consequently, you should not set ``INHIBIT_PACKAGE_STRIP`` when you + Consequently, you should not set :term:`INHIBIT_PACKAGE_STRIP` when you plan to debug in general. :term:`INHIBIT_SYSROOT_STRIP` @@ -3554,7 +3473,7 @@ system and gives an overview of their function and contents. By default, the OpenEmbedded build system strips binaries in the resulting sysroot. When you specifically set the - ``INHIBIT_SYSROOT_STRIP`` variable to "1" in your recipe, you inhibit + :term:`INHIBIT_SYSROOT_STRIP` variable to "1" in your recipe, you inhibit this stripping. If you want to use this variable, include the @@ -3564,11 +3483,11 @@ system and gives an overview of their function and contents. .. note:: - Use of the ``INHIBIT_SYSROOT_STRIP`` variable occurs in rare and + Use of the :term:`INHIBIT_SYSROOT_STRIP` variable occurs in rare and special circumstances. For example, suppose you are building bare-metal firmware by using an external GCC toolchain. Furthermore, - even if the toolchain's binaries are strippable, other files exist - that are needed for the build that are not strippable. + even if the toolchain's binaries are strippable, there are other files + needed for the build that are not strippable. :term:`INITRAMFS_FSTYPES` Defines the format for the output image of an initial RAM filesystem @@ -3586,7 +3505,7 @@ system and gives an overview of their function and contents. :term:`INITRAMFS_IMAGE` Specifies the :term:`PROVIDES` name of an image recipe that is used to build an initial RAM filesystem (initramfs) - image. In other words, the ``INITRAMFS_IMAGE`` variable causes an + image. In other words, the :term:`INITRAMFS_IMAGE` variable causes an additional recipe to be built as a dependency to whatever root filesystem recipe you might be using (e.g. ``core-image-sato``). The initramfs image recipe you provide should set @@ -3602,16 +3521,16 @@ system and gives an overview of their function and contents. See the ``meta/recipes-core/images/core-image-minimal-initramfs.bb`` recipe in the :term:`Source Directory` for an example initramfs recipe. To select this sample recipe as - the one built to provide the initramfs image, set ``INITRAMFS_IMAGE`` + the one built to provide the initramfs image, set :term:`INITRAMFS_IMAGE` to "core-image-minimal-initramfs". You can also find more information by referencing the ``meta-poky/conf/local.conf.sample.extended`` configuration file in the Source Directory, the :ref:`image <ref-classes-image>` class, and the :ref:`kernel <ref-classes-kernel>` class to see how to use - the ``INITRAMFS_IMAGE`` variable. + the :term:`INITRAMFS_IMAGE` variable. - If ``INITRAMFS_IMAGE`` is empty, which is the default, then no + If :term:`INITRAMFS_IMAGE` is empty, which is the default, then no initramfs image is built. For more information, you can also see the @@ -3646,21 +3565,19 @@ system and gives an overview of their function and contents. Setting the variable to "1" in a configuration file causes the OpenEmbedded build system to generate a kernel image with the - initramfs specified in ``INITRAMFS_IMAGE`` bundled within: - :: + initramfs specified in :term:`INITRAMFS_IMAGE` bundled within:: INITRAMFS_IMAGE_BUNDLE = "1" By default, the :ref:`kernel <ref-classes-kernel>` class sets this variable to a - null string as follows: - :: + null string as follows:: INITRAMFS_IMAGE_BUNDLE ?= "" .. note:: - You must set the ``INITRAMFS_IMAGE_BUNDLE`` variable in a + You must set the :term:`INITRAMFS_IMAGE_BUNDLE` variable in a configuration file. You cannot set the variable in a recipe file. See the @@ -3672,15 +3589,13 @@ system and gives an overview of their function and contents. :term:`INITRAMFS_LINK_NAME` The link name of the initial RAM filesystem image. This variable is set in the ``meta/classes/kernel-artifact-names.bbclass`` file as - follows: - :: + follows:: INITRAMFS_LINK_NAME ?= "initramfs-${KERNEL_ARTIFACT_LINK_NAME}" The value of the ``KERNEL_ARTIFACT_LINK_NAME`` variable, which is set in the same - file, has the following value: - :: + file, has the following value:: KERNEL_ARTIFACT_LINK_NAME ?= "${MACHINE}" @@ -3690,14 +3605,12 @@ system and gives an overview of their function and contents. :term:`INITRAMFS_NAME` The base name of the initial RAM filesystem image. This variable is set in the ``meta/classes/kernel-artifact-names.bbclass`` file as - follows: - :: + follows:: INITRAMFS_NAME ?= "initramfs-${KERNEL_ARTIFACT_NAME}" The value of the :term:`KERNEL_ARTIFACT_NAME` - variable, which is set in the same file, has the following value: - :: + variable, which is set in the same file, has the following value:: KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" @@ -3705,13 +3618,13 @@ system and gives an overview of their function and contents. Indicates list of filesystem images to concatenate and use as an initial RAM disk (``initrd``). - The ``INITRD`` variable is an optional variable used with the + The :term:`INITRD` variable is an optional variable used with the :ref:`image-live <ref-classes-image-live>` class. :term:`INITRD_IMAGE` When building a "live" bootable image (i.e. when :term:`IMAGE_FSTYPES` contains "live"), - ``INITRD_IMAGE`` specifies the image recipe that should be built to + :term:`INITRD_IMAGE` specifies the image recipe that should be built to provide the initial RAM disk image. The default value is "core-image-minimal-initramfs". @@ -3735,8 +3648,7 @@ system and gives an overview of their function and contents. variable. :term:`INITSCRIPT_PARAMS` - Specifies the options to pass to ``update-rc.d``. Here is an example: - :: + Specifies the options to pass to ``update-rc.d``. Here is an example:: INITSCRIPT_PARAMS = "start 99 5 2 . stop 20 0 1 6 ." @@ -3746,7 +3658,7 @@ system and gives an overview of their function and contents. The variable's default value is "defaults", which is set in the :ref:`update-rc.d <ref-classes-update-rc.d>` class. - The value in ``INITSCRIPT_PARAMS`` is passed through to the + The value in :term:`INITSCRIPT_PARAMS` is passed through to the ``update-rc.d`` command. For more information on valid parameters, please see the ``update-rc.d`` manual page at https://manpages.debian.org/buster/init-system-helpers/update-rc.d.8.en.html @@ -3756,8 +3668,7 @@ system and gives an overview of their function and contents. recipe. For example, to skip the check for symbolic link ``.so`` files in the main package of a recipe, add the following to the recipe. The package name override must be used, which in this example - is ``${PN}``: - :: + is ``${PN}``:: INSANE_SKIP_${PN} += "dev-so" @@ -3766,7 +3677,7 @@ system and gives an overview of their function and contents. :term:`INSTALL_TIMEZONE_FILE` By default, the ``tzdata`` recipe packages an ``/etc/timezone`` file. - Set the ``INSTALL_TIMEZONE_FILE`` variable to "0" at the + Set the :term:`INSTALL_TIMEZONE_FILE` variable to "0" at the configuration level to disable this behavior. :term:`IPK_FEED_URIS` @@ -3798,9 +3709,8 @@ system and gives an overview of their function and contents. Values for this variable are set in the kernel's recipe file and the kernel's append file. For example, if you are using the ``linux-yocto_4.12`` kernel, the kernel recipe file is the - ``meta/recipes-kernel/linux/linux-yocto_4.12.bb`` file. ``KBRANCH`` - is set as follows in that kernel recipe file: - :: + ``meta/recipes-kernel/linux/linux-yocto_4.12.bb`` file. :term:`KBRANCH` + is set as follows in that kernel recipe file:: KBRANCH ?= "standard/base" @@ -3812,15 +3722,14 @@ system and gives an overview of their function and contents. Beaglebone, EdgeRouter, and generic versions of both 32 and 64-bit IA machines (``meta-yocto-bsp``) is named ``meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.12.bbappend``. - Here are the related statements from that append file: - :: + Here are the related statements from that append file:: KBRANCH_genericx86 = "standard/base" KBRANCH_genericx86-64 = "standard/base" KBRANCH_edgerouter = "standard/edgerouter" KBRANCH_beaglebone = "standard/beaglebone" - The ``KBRANCH`` statements + The :term:`KBRANCH` statements identify the kernel branch to use when building for each supported BSP. @@ -3834,32 +3743,67 @@ system and gives an overview of their function and contents. would place patch files and configuration fragment files (i.e. "out-of-tree"). However, if you want to use a ``defconfig`` file that is part of the kernel tree (i.e. "in-tree"), you can use the - ``KBUILD_DEFCONFIG`` variable and append the + :term:`KBUILD_DEFCONFIG` variable and append the :term:`KMACHINE` variable to point to the ``defconfig`` file. To use the variable, set it in the append file for your kernel recipe - using the following form: - :: + using the following form:: KBUILD_DEFCONFIG_KMACHINE ?= defconfig_file - Here is an example from a "raspberrypi2" ``KMACHINE`` build that uses - a ``defconfig`` file named "bcm2709_defconfig": - :: + Here is an example from a "raspberrypi2" :term:`KMACHINE` build that uses + a ``defconfig`` file named "bcm2709_defconfig":: KBUILD_DEFCONFIG_raspberrypi2 = "bcm2709_defconfig" - As an alternative, you can use the following within your append file: - :: + As an alternative, you can use the following within your append file:: KBUILD_DEFCONFIG_pn-linux-yocto ?= defconfig_file For more - information on how to use the ``KBUILD_DEFCONFIG`` variable, see the + information on how to use the :term:`KBUILD_DEFCONFIG` variable, see the ":ref:`kernel-dev/common:using an "in-tree" \`\`defconfig\`\` file`" section in the Yocto Project Linux Kernel Development Manual. + :term:`KCONFIG_MODE` + When used with the :ref:`kernel-yocto <ref-classes-kernel-yocto>` + class, specifies the kernel configuration values to use for options + not specified in the provided ``defconfig`` file. Valid options are:: + + KCONFIG_MODE = "alldefconfig" + KCONFIG_MODE = "allnoconfig" + + In ``alldefconfig`` mode the options not explicitly specified will be + assigned their Kconfig default value. In ``allnoconfig`` mode the + options not explicitly specified will be disabled in the kernel + config. + + In case :term:`KCONFIG_MODE` is not set the behaviour will depend on where + the ``defconfig`` file is coming from. An "in-tree" ``defconfig`` file + will be handled in ``alldefconfig`` mode, a ``defconfig`` file placed + in ``${WORKDIR}`` through a meta-layer will be handled in + ``allnoconfig`` mode. + + An "in-tree" ``defconfig`` file can be selected via the + :term:`KBUILD_DEFCONFIG` variable. :term:`KCONFIG_MODE` does not need to + be explicitly set. + + A ``defconfig`` file compatible with ``allnoconfig`` mode can be + generated by copying the ``.config`` file from a working Linux kernel + build, renaming it to ``defconfig`` and placing it into the Linux + kernel ``${WORKDIR}`` through your meta-layer. :term:`KCONFIG_MODE` does + not need to be explicitly set. + + A ``defconfig`` file compatible with ``alldefconfig`` mode can be + generated using the + :ref:`ref-tasks-savedefconfig` + task and placed into the Linux kernel ``${WORKDIR}`` through your + meta-layer. Explicitely set :term:`KCONFIG_MODE`:: + + KCONFIG_MODE = "alldefconfig" + + :term:`KERNEL_ALT_IMAGETYPE` Specifies an alternate kernel image type for creation in addition to the kernel image type specified using the @@ -3867,13 +3811,12 @@ system and gives an overview of their function and contents. :term:`KERNEL_ARTIFACT_NAME` Specifies the name of all of the build artifacts. You can change the - name of the artifacts by changing the ``KERNEL_ARTIFACT_NAME`` + name of the artifacts by changing the :term:`KERNEL_ARTIFACT_NAME` variable. - The value of ``KERNEL_ARTIFACT_NAME``, which is set in the + The value of :term:`KERNEL_ARTIFACT_NAME`, which is set in the ``meta/classes/kernel-artifact-names.bbclass`` file, has the - following default value: - :: + following default value:: KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" @@ -3895,7 +3838,7 @@ system and gives an overview of their function and contents. .. note:: - Legacy support exists for specifying the full path to the device + There is legacy support for specifying the full path to the device tree. However, providing just the ``.dtb`` file is preferred. In order to use this variable, the @@ -3905,15 +3848,13 @@ system and gives an overview of their function and contents. :term:`KERNEL_DTB_LINK_NAME` The link name of the kernel device tree binary (DTB). This variable is set in the ``meta/classes/kernel-artifact-names.bbclass`` file as - follows: - :: + follows:: KERNEL_DTB_LINK_NAME ?= "${KERNEL_ARTIFACT_LINK_NAME}" The value of the ``KERNEL_ARTIFACT_LINK_NAME`` variable, which is set in - the same file, has the following value: - :: + the same file, has the following value:: KERNEL_ARTIFACT_LINK_NAME ?= "${MACHINE}" @@ -3923,14 +3864,12 @@ system and gives an overview of their function and contents. :term:`KERNEL_DTB_NAME` The base name of the kernel device tree binary (DTB). This variable is set in the ``meta/classes/kernel-artifact-names.bbclass`` file as - follows: - :: + follows:: KERNEL_DTB_NAME ?= "${KERNEL_ARTIFACT_NAME}" The value of the :term:`KERNEL_ARTIFACT_NAME` - variable, which is set in the same file, has the following value: - :: + variable, which is set in the same file, has the following value:: KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" @@ -3952,21 +3891,20 @@ system and gives an overview of their function and contents. system, the default Board Support Packages (BSPs) :term:`Metadata` is provided through the :term:`KMACHINE` and :term:`KBRANCH` - variables. You can use the ``KERNEL_FEATURES`` variable from within + variables. You can use the :term:`KERNEL_FEATURES` variable from within the kernel recipe or kernel append file to further add metadata for all BSPs or specific BSPs. The metadata you add through this variable includes config fragments and features descriptions, which usually includes patches as well as - config fragments. You typically override the ``KERNEL_FEATURES`` + config fragments. You typically override the :term:`KERNEL_FEATURES` variable for a specific machine. In this way, you can provide validated, but optional, sets of kernel configurations and features. For example, the following example from the ``linux-yocto-rt_4.12`` kernel recipe adds "netfilter" and "taskstats" features to all BSPs as well as "virtio" configurations to all QEMU machines. The last two - statements add specific configurations to targeted machine types: - :: + statements add specific configurations to targeted machine types:: KERNEL_EXTRA_FEATURES ?= "features/netfilter/netfilter.scc features/taskstats/taskstats.scc" KERNEL_FEATURES_append = "${KERNEL_EXTRA_FEATURES}" @@ -3977,15 +3915,13 @@ system and gives an overview of their function and contents. :term:`KERNEL_FIT_LINK_NAME` The link name of the kernel flattened image tree (FIT) image. This variable is set in the ``meta/classes/kernel-artifact-names.bbclass`` - file as follows: - :: + file as follows:: KERNEL_FIT_LINK_NAME ?= "${KERNEL_ARTIFACT_LINK_NAME}" The value of the ``KERNEL_ARTIFACT_LINK_NAME`` variable, which is set in the same - file, has the following value: - :: + file, has the following value:: KERNEL_ARTIFACT_LINK_NAME ?= "${MACHINE}" @@ -3995,28 +3931,24 @@ system and gives an overview of their function and contents. :term:`KERNEL_FIT_NAME` The base name of the kernel flattened image tree (FIT) image. This variable is set in the ``meta/classes/kernel-artifact-names.bbclass`` - file as follows: - :: + file as follows:: KERNEL_FIT_NAME ?= "${KERNEL_ARTIFACT_NAME}" The value of the :term:`KERNEL_ARTIFACT_NAME` - variable, which is set in the same file, has the following value: - :: + variable, which is set in the same file, has the following value:: KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" :term:`KERNEL_IMAGE_LINK_NAME` The link name for the kernel image. This variable is set in the - ``meta/classes/kernel-artifact-names.bbclass`` file as follows: - :: + ``meta/classes/kernel-artifact-names.bbclass`` file as follows:: KERNEL_IMAGE_LINK_NAME ?= "${KERNEL_ARTIFACT_LINK_NAME}" The value of the ``KERNEL_ARTIFACT_LINK_NAME`` variable, which is set in the same - file, has the following value: - :: + file, has the following value:: KERNEL_ARTIFACT_LINK_NAME ?= "${MACHINE}" @@ -4025,12 +3957,12 @@ system and gives an overview of their function and contents. :term:`KERNEL_IMAGE_MAXSIZE` Specifies the maximum size of the kernel image file in kilobytes. If - ``KERNEL_IMAGE_MAXSIZE`` is set, the size of the kernel image file is + :term:`KERNEL_IMAGE_MAXSIZE` is set, the size of the kernel image file is checked against the set value during the :ref:`ref-tasks-sizecheck` task. The task fails if the kernel image file is larger than the setting. - ``KERNEL_IMAGE_MAXSIZE`` is useful for target devices that have a + :term:`KERNEL_IMAGE_MAXSIZE` is useful for target devices that have a limited amount of space in which the kernel image must be stored. By default, this variable is not set, which means the size of the @@ -4038,15 +3970,13 @@ system and gives an overview of their function and contents. :term:`KERNEL_IMAGE_NAME` The base name of the kernel image. This variable is set in the - ``meta/classes/kernel-artifact-names.bbclass`` file as follows: - :: + ``meta/classes/kernel-artifact-names.bbclass`` file as follows:: KERNEL_IMAGE_NAME ?= "${KERNEL_ARTIFACT_NAME}" The value of the :term:`KERNEL_ARTIFACT_NAME` variable, - which is set in the same file, has the following value: - :: + which is set in the same file, has the following value:: KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" @@ -4057,7 +3987,7 @@ system and gives an overview of their function and contents. build. If you want to build an alternate kernel image type in addition to that - specified by ``KERNEL_IMAGETYPE``, use the :term:`KERNEL_ALT_IMAGETYPE` + specified by :term:`KERNEL_IMAGETYPE`, use the :term:`KERNEL_ALT_IMAGETYPE` variable. :term:`KERNEL_MODULE_AUTOLOAD` @@ -4068,23 +3998,21 @@ system and gives an overview of their function and contents. This variable replaces the deprecated :term:`module_autoload` variable. - You can use the ``KERNEL_MODULE_AUTOLOAD`` variable anywhere that it + You can use the :term:`KERNEL_MODULE_AUTOLOAD` variable anywhere that it can be recognized by the kernel recipe or by an out-of-tree kernel module recipe (e.g. a machine configuration file, a distribution configuration file, an append file for the recipe, or the recipe itself). - Specify it as follows: - :: + Specify it as follows:: KERNEL_MODULE_AUTOLOAD += "module_name1 module_name2 module_name3" - Including ``KERNEL_MODULE_AUTOLOAD`` causes the OpenEmbedded build + Including :term:`KERNEL_MODULE_AUTOLOAD` causes the OpenEmbedded build system to populate the ``/etc/modules-load.d/modname.conf`` file with the list of modules to be auto-loaded on boot. The modules appear one-per-line in the file. Here is an example of the most common use - case: - :: + case:: KERNEL_MODULE_AUTOLOAD += "module_name" @@ -4109,7 +4037,7 @@ system and gives an overview of their function and contents. To help maximize compatibility with out-of-tree drivers used to build modules, the OpenEmbedded build system also recognizes and uses the :term:`KERNEL_SRC` variable, which is identical to - the ``KERNEL_PATH`` variable. Both variables are common variables + the :term:`KERNEL_PATH` variable. Both variables are common variables used by external Makefiles to point to the kernel source directory. :term:`KERNEL_SRC` @@ -4123,7 +4051,7 @@ system and gives an overview of their function and contents. To help maximize compatibility with out-of-tree drivers used to build modules, the OpenEmbedded build system also recognizes and uses the :term:`KERNEL_PATH` variable, which is identical - to the ``KERNEL_SRC`` variable. Both variables are common variables + to the :term:`KERNEL_SRC` variable. Both variables are common variables used by external Makefiles to point to the kernel source directory. :term:`KERNEL_VERSION` @@ -4135,10 +4063,10 @@ system and gives an overview of their function and contents. :term:`KERNELDEPMODDEPEND` Specifies whether the data referenced through - :term:`PKGDATA_DIR` is needed or not. The - ``KERNELDEPMODDEPEND`` does not control whether or not that data + :term:`PKGDATA_DIR` is needed or not. + :term:`KERNELDEPMODDEPEND` does not control whether or not that data exists, but simply whether or not it is used. If you do not need to - use the data, set the ``KERNELDEPMODDEPEND`` variable in your + use the data, set the :term:`KERNELDEPMODDEPEND` variable in your ``initramfs`` recipe. Setting the variable there when the data is not needed avoids a potential dependency loop. @@ -4146,8 +4074,7 @@ system and gives an overview of their function and contents. Provides a short description of a configuration fragment. You use this variable in the ``.scc`` file that describes a configuration fragment file. Here is the variable used in a file named ``smp.scc`` - to describe SMP being enabled: - :: + to describe SMP being enabled:: define KFEATURE_DESCRIPTION "Enable SMP" @@ -4158,13 +4085,12 @@ system and gives an overview of their function and contents. OpenEmbedded build system understands as ``core2-32-intel-common`` goes by a different name in the Linux Yocto kernel. The kernel understands that machine as ``intel-core2-32``. For cases like these, - the ``KMACHINE`` variable maps the kernel machine name to the + the :term:`KMACHINE` variable maps the kernel machine name to the OpenEmbedded build system machine name. These mappings between different names occur in the Yocto Linux Kernel's ``meta`` branch. As an example take a look in the - ``common/recipes-kernel/linux/linux-yocto_3.19.bbappend`` file: - :: + ``common/recipes-kernel/linux/linux-yocto_3.19.bbappend`` file:: LINUX_VERSION_core2-32-intel-common = "3.19.0" COMPATIBLE_MACHINE_core2-32-intel-common = "${MACHINE}" @@ -4174,7 +4100,7 @@ system and gives an overview of their function and contents. KBRANCH_core2-32-intel-common = "standard/base" KERNEL_FEATURES_append_core2-32-intel-common = "${KERNEL_FEATURES_INTEL_COMMON}" - The ``KMACHINE`` statement says + The :term:`KMACHINE` statement says that the kernel understands the machine name as "intel-core2-32". However, the OpenEmbedded build system understands the machine as "core2-32-intel-common". @@ -4187,7 +4113,7 @@ system and gives an overview of their function and contents. Yocto Project Linux Kernel Development Manual for more information on kernel types. - You define the ``KTYPE`` variable in the + You define the :term:`KTYPE` variable in the :ref:`kernel-dev/advanced:bsp descriptions`. The value you use must match the value used for the :term:`LINUX_KERNEL_TYPE` value used by the @@ -4202,8 +4128,7 @@ system and gives an overview of their function and contents. :term:`LAYERDEPENDS` Lists the layers, separated by spaces, on which this recipe depends. Optionally, you can specify a specific layer version for a dependency - by adding it to the end of the layer name. Here is an example: - :: + by adding it to the end of the layer name. Here is an example:: LAYERDEPENDS_mylayer = "anotherlayer (=3)" @@ -4228,8 +4153,7 @@ system and gives an overview of their function and contents. Optionally, you can specify a specific layer version for a recommendation by adding the version to the end of the layer name. - Here is an example: - :: + Here is an example:: LAYERRECOMMENDS_mylayer = "anotherlayer (=3)" @@ -4242,7 +4166,7 @@ system and gives an overview of their function and contents. :term:`LAYERSERIES_COMPAT` Lists the versions of the :term:`OpenEmbedded-Core (OE-Core)` for which - a layer is compatible. Using the ``LAYERSERIES_COMPAT`` variable + a layer is compatible. Using the :term:`LAYERSERIES_COMPAT` variable allows the layer maintainer to indicate which combinations of the layer and OE-Core can be expected to work. The variable gives the system a way to detect when a layer has not been tested with new @@ -4253,14 +4177,13 @@ system and gives an overview of their function and contents. For the list, use the Yocto Project :yocto_wiki:`Release Name </Releases>` (e.g. &DISTRO_NAME_NO_CAP;). To specify multiple OE-Core versions for the - layer, use a space-separated list: - :: + layer, use a space-separated list:: LAYERSERIES_COMPAT_layer_root_name = "&DISTRO_NAME_NO_CAP; &DISTRO_NAME_NO_CAP_MINUS_ONE;" .. note:: - Setting ``LAYERSERIES_COMPAT`` is required by the Yocto Project + Setting :term:`LAYERSERIES_COMPAT` is required by the Yocto Project Compatible version 2 standard. The OpenEmbedded build system produces a warning if the variable is not set for any given layer. @@ -4284,7 +4207,7 @@ system and gives an overview of their function and contents. to an environment variable and thus made visible to the software being built during the compilation step. - Default initialization for ``LDFLAGS`` varies depending on what is + Default initialization for :term:`LDFLAGS` varies depending on what is being built: - :term:`TARGET_LDFLAGS` when building for the @@ -4325,8 +4248,8 @@ system and gives an overview of their function and contents. - Separate license names using \| (pipe) when there is a choice between licenses. - - Separate license names using & (ampersand) when multiple licenses - exist that cover different parts of the source. + - Separate license names using & (ampersand) when there are + multiple licenses for different parts of the source. - You can use spaces between license names. @@ -4335,8 +4258,7 @@ system and gives an overview of their function and contents. :term:`SPDXLICENSEMAP` flag names defined in ``meta/conf/licenses.conf``. - Here are some examples: - :: + Here are some examples:: LICENSE = "LGPLv2.1 | GPLv3" LICENSE = "MPL-1 & LGPLv2.1" @@ -4353,15 +4275,14 @@ system and gives an overview of their function and contents. situations where components of the output have different licenses. For example, a piece of software whose code is licensed under GPLv2 but has accompanying documentation licensed under the GNU Free - Documentation License 1.2 could be specified as follows: - :: + Documentation License 1.2 could be specified as follows:: LICENSE = "GFDL-1.2 & GPLv2" LICENSE_${PN} = "GPLv2" LICENSE_${PN}-doc = "GFDL-1.2" :term:`LICENSE_CREATE_PACKAGE` - Setting ``LICENSE_CREATE_PACKAGE`` to "1" causes the OpenEmbedded + Setting :term:`LICENSE_CREATE_PACKAGE` to "1" causes the OpenEmbedded build system to create an extra package (i.e. ``${``\ :term:`PN`\ ``}-lic``) for each recipe and to add those packages to the @@ -4406,11 +4327,10 @@ system and gives an overview of their function and contents. :term:`LICENSE_PATH` Path to additional licenses used during the build. By default, the - OpenEmbedded build system uses ``COMMON_LICENSE_DIR`` to define the + OpenEmbedded build system uses :term:`COMMON_LICENSE_DIR` to define the directory that holds common license text used during the build. The - ``LICENSE_PATH`` variable allows you to extend that location to other - areas that have additional licenses: - :: + :term:`LICENSE_PATH` variable allows you to extend that location to other + areas that have additional licenses:: LICENSE_PATH += "path-to-additional-common-licenses" @@ -4422,9 +4342,9 @@ system and gives an overview of their function and contents. Yocto Project Linux Kernel Development Manual for more information on kernel types. - If you do not specify a ``LINUX_KERNEL_TYPE``, it defaults to + If you do not specify a :term:`LINUX_KERNEL_TYPE`, it defaults to "standard". Together with :term:`KMACHINE`, the - ``LINUX_KERNEL_TYPE`` variable defines the search arguments used by + :term:`LINUX_KERNEL_TYPE` variable defines the search arguments used by the kernel tools to find the appropriate description within the kernel :term:`Metadata` with which to build out the sources and configuration. @@ -4434,14 +4354,12 @@ system and gives an overview of their function and contents. being built using the OpenEmbedded build system is based. You define this variable in the kernel recipe. For example, the ``linux-yocto-3.4.bb`` kernel recipe found in - ``meta/recipes-kernel/linux`` defines the variables as follows: - :: + ``meta/recipes-kernel/linux`` defines the variables as follows:: LINUX_VERSION ?= "3.4.24" - The ``LINUX_VERSION`` variable is used to define :term:`PV` - for the recipe: - :: + The :term:`LINUX_VERSION` variable is used to define :term:`PV` + for the recipe:: PV = "${LINUX_VERSION}+git${SRCPV}" @@ -4449,16 +4367,14 @@ system and gives an overview of their function and contents. A string extension compiled into the version string of the Linux kernel built with the OpenEmbedded build system. You define this variable in the kernel recipe. For example, the linux-yocto kernel - recipes all define the variable as follows: - :: + recipes all define the variable as follows:: LINUX_VERSION_EXTENSION ?= "-yocto-${LINUX_KERNEL_TYPE}" Defining this variable essentially sets the Linux kernel configuration item ``CONFIG_LOCALVERSION``, which is visible through the ``uname`` command. Here is an example that shows the extension - assuming it was set as previously shown: - :: + assuming it was set as previously shown:: $ uname -r 3.7.0-rc8-custom @@ -4472,24 +4388,22 @@ system and gives an overview of their function and contents. :term:`MACHINE` Specifies the target device for which the image is built. You define - ``MACHINE`` in the ``local.conf`` file found in the - :term:`Build Directory`. By default, ``MACHINE`` is set to + :term:`MACHINE` in the ``local.conf`` file found in the + :term:`Build Directory`. By default, :term:`MACHINE` is set to "qemux86", which is an x86-based architecture machine to be emulated - using QEMU: - :: + using QEMU:: MACHINE ?= "qemux86" The variable corresponds to a machine configuration file of the same name, through which machine-specific configurations are set. Thus, - when ``MACHINE`` is set to "qemux86" there exists the corresponding - ``qemux86.conf`` machine configuration file, which can be found in + when :term:`MACHINE` is set to "qemux86", the corresponding + ``qemux86.conf`` machine configuration file can be found in the :term:`Source Directory` in ``meta/conf/machine``. The list of machines supported by the Yocto Project as shipped - include the following: - :: + include the following:: MACHINE ?= "qemuarm" MACHINE ?= "qemuarm64" @@ -4509,13 +4423,13 @@ system and gives an overview of their function and contents. .. note:: Adding additional Board Support Package (BSP) layers to your - configuration adds new possible settings for ``MACHINE``. + configuration adds new possible settings for :term:`MACHINE`. :term:`MACHINE_ARCH` Specifies the name of the machine-specific architecture. This variable is set automatically from :term:`MACHINE` or :term:`TUNE_PKGARCH`. You should not hand-edit - the ``MACHINE_ARCH`` variable. + the :term:`MACHINE_ARCH` variable. :term:`MACHINE_ESSENTIAL_EXTRA_RDEPENDS` A list of required machine-specific packages to install as part of @@ -4527,7 +4441,7 @@ system and gives an overview of their function and contents. image. This variable is similar to the - ``MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS`` variable with the exception + :term:`MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS` variable with the exception that the image being built has a build dependency on the variable's list of packages. In other words, the image will not build if a file in this list is not found. @@ -4535,8 +4449,7 @@ system and gives an overview of their function and contents. As an example, suppose the machine for which you are building requires ``example-init`` to be run during boot to initialize the hardware. In this case, you would use the following in the machine's - ``.conf`` configuration file: - :: + ``.conf`` configuration file:: MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "example-init" @@ -4549,7 +4462,7 @@ system and gives an overview of their function and contents. on ``packagegroup-core-boot``, including the ``core-image-minimal`` image. - This variable is similar to the ``MACHINE_ESSENTIAL_EXTRA_RDEPENDS`` + This variable is similar to the :term:`MACHINE_ESSENTIAL_EXTRA_RDEPENDS` variable with the exception that the image being built does not have a build dependency on the variable's list of packages. In other words, the image will still build if a package in this list is not @@ -4567,8 +4480,7 @@ system and gives an overview of their function and contents. "recommends" relationship so that in the latter case, the build will not fail due to the missing package. To accomplish this, assuming the package for the module was called ``kernel-module-ab123``, you would - use the following in the machine's ``.conf`` configuration file: - :: + use the following in the machine's ``.conf`` configuration file:: MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-module-ab123" @@ -4592,7 +4504,7 @@ system and gives an overview of their function and contents. which does not include the ``core-image-minimal`` or ``core-image-full-cmdline`` images. - The variable is similar to the ``MACHINE_EXTRA_RRECOMMENDS`` variable + The variable is similar to the :term:`MACHINE_EXTRA_RRECOMMENDS` variable with the exception that the image being built has a build dependency on the variable's list of packages. In other words, the image will not build if a file in this list is not found. @@ -4604,8 +4516,7 @@ system and gives an overview of their function and contents. exist, so it is acceptable for the build process to depend upon finding the package. In this case, assuming the package for the firmware was called ``wifidriver-firmware``, you would use the - following in the ``.conf`` file for the machine: - :: + following in the ``.conf`` file for the machine:: MACHINE_EXTRA_RDEPENDS += "wifidriver-firmware" @@ -4618,7 +4529,7 @@ system and gives an overview of their function and contents. which does not include the ``core-image-minimal`` or ``core-image-full-cmdline`` images. - This variable is similar to the ``MACHINE_EXTRA_RDEPENDS`` variable + This variable is similar to the :term:`MACHINE_EXTRA_RDEPENDS` variable with the exception that the image being built does not have a build dependency on the variable's list of packages. In other words, the image will build if a file in this list is not found. @@ -4631,8 +4542,7 @@ system and gives an overview of their function and contents. the build to succeed instead of failing as a result of the package not being found. To accomplish this, assuming the package for the module was called ``kernel-module-examplewifi``, you would use the - following in the ``.conf`` file for the machine: - :: + following in the ``.conf`` file for the machine:: MACHINE_EXTRA_RRECOMMENDS += "kernel-module-examplewifi" @@ -4648,8 +4558,8 @@ system and gives an overview of their function and contents. shipped, see the ":ref:`ref-features-machine`" section. :term:`MACHINE_FEATURES_BACKFILL` - Features to be added to ``MACHINE_FEATURES`` if not also present in - ``MACHINE_FEATURES_BACKFILL_CONSIDERED``. + Features to be added to :term:`MACHINE_FEATURES` if not also present in + :term:`MACHINE_FEATURES_BACKFILL_CONSIDERED`. This variable is set in the ``meta/conf/bitbake.conf`` file. It is not intended to be user-configurable. It is best to just reference @@ -4658,8 +4568,8 @@ system and gives an overview of their function and contents. section for more information. :term:`MACHINE_FEATURES_BACKFILL_CONSIDERED` - Features from ``MACHINE_FEATURES_BACKFILL`` that should not be - backfilled (i.e. added to ``MACHINE_FEATURES``) during the build. See + Features from :term:`MACHINE_FEATURES_BACKFILL` that should not be + backfilled (i.e. added to :term:`MACHINE_FEATURES`) during the build. See the ":ref:`ref-features-backfill`" section for more information. :term:`MACHINEOVERRIDES` @@ -4667,27 +4577,25 @@ system and gives an overview of their function and contents. machine. By default, this list includes the value of :term:`MACHINE`. - You can extend ``MACHINEOVERRIDES`` to add extra overrides that + You can extend :term:`MACHINEOVERRIDES` to add extra overrides that should apply to a machine. For example, all machines emulated in QEMU (e.g. ``qemuarm``, ``qemux86``, and so forth) include a file named ``meta/conf/machine/include/qemu.inc`` that prepends the following - override to ``MACHINEOVERRIDES``: - :: + override to :term:`MACHINEOVERRIDES`:: MACHINEOVERRIDES =. "qemuall:" This override allows variables to be overridden for all machines emulated in QEMU, like in the following example from the ``connman-conf`` - recipe: - :: + recipe:: SRC_URI_append_qemuall = " file://wired.config \ file://wired-setup \ " The underlying mechanism behind - ``MACHINEOVERRIDES`` is simply that it is included in the default + :term:`MACHINEOVERRIDES` is simply that it is included in the default value of :term:`OVERRIDES`. :term:`MAINTAINER` @@ -4707,10 +4615,10 @@ system and gives an overview of their function and contents. first tries the local download directory. If that location fails, the build system tries locations defined by :term:`PREMIRRORS`, the upstream source, and then - locations specified by ``MIRRORS`` in that order. + locations specified by :term:`MIRRORS` in that order. Assuming your distribution (:term:`DISTRO`) is "poky", - the default value for ``MIRRORS`` is defined in the + the default value for :term:`MIRRORS` is defined in the ``conf/distro/poky.conf`` file in the ``meta-poky`` Git repository. :term:`MLPREFIX` @@ -4718,49 +4626,45 @@ system and gives an overview of their function and contents. special version of a recipe or package (i.e. a Multilib version). The variable is used in places where the prefix needs to be added to or removed from a the name (e.g. the :term:`BPN` variable). - ``MLPREFIX`` gets set when a prefix has been added to ``PN``. + :term:`MLPREFIX` gets set when a prefix has been added to :term:`PN`. .. note:: - The "ML" in ``MLPREFIX`` stands for "MultiLib". This representation is + The "ML" in :term:`MLPREFIX` stands for "MultiLib". This representation is historical and comes from a time when ``nativesdk`` was a suffix rather than a prefix on the recipe name. When ``nativesdk`` was turned - into a prefix, it made sense to set ``MLPREFIX`` for it as well. + into a prefix, it made sense to set :term:`MLPREFIX` for it as well. - To help understand when ``MLPREFIX`` might be needed, consider when + To help understand when :term:`MLPREFIX` might be needed, consider when :term:`BBCLASSEXTEND` is used to provide a ``nativesdk`` version of a recipe in addition to the target version. If that recipe declares build-time dependencies on tasks in other recipes by using :term:`DEPENDS`, then a dependency on "foo" will automatically get rewritten to a dependency on "nativesdk-foo". However, dependencies like the following will not - get rewritten automatically: - :: + get rewritten automatically:: do_foo[depends] += "recipe:do_foo" If you want such a dependency to also get transformed, you can do the - following: - :: + following:: do_foo[depends] += "${MLPREFIX}recipe:do_foo" - module_autoload - This variable has been replaced by the ``KERNEL_MODULE_AUTOLOAD`` + :term:`module_autoload` + This variable has been replaced by the :term:`KERNEL_MODULE_AUTOLOAD` variable. You should replace all occurrences of ``module_autoload`` - with additions to ``KERNEL_MODULE_AUTOLOAD``, for example: - :: + with additions to :term:`KERNEL_MODULE_AUTOLOAD`, for example:: module_autoload_rfcomm = "rfcomm" - should now be replaced with: - :: + should now be replaced with:: KERNEL_MODULE_AUTOLOAD += "rfcomm" See the :term:`KERNEL_MODULE_AUTOLOAD` variable for more information. - module_conf + :term:`module_conf` Specifies `modprobe.d <https://linux.die.net/man/5/modprobe.d>`_ syntax lines for inclusion in the ``/etc/modprobe.d/modname.conf`` file. @@ -4773,8 +4677,7 @@ system and gives an overview of their function and contents. :term:`KERNEL_MODULE_AUTOLOAD` variable. - Here is the general syntax: - :: + Here is the general syntax:: module_conf_module_name = "modprobe.d-syntax" @@ -4786,8 +4689,7 @@ system and gives an overview of their function and contents. Including ``module_conf`` causes the OpenEmbedded build system to populate the ``/etc/modprobe.d/modname.conf`` file with ``modprobe.d`` syntax lines. Here is an example that adds the options - ``arg1`` and ``arg2`` to a module named ``mymodule``: - :: + ``arg1`` and ``arg2`` to a module named ``mymodule``:: module_conf_mymodule = "options mymodule arg1=val1 arg2=val2" @@ -4801,15 +4703,13 @@ system and gives an overview of their function and contents. :term:`MODULE_TARBALL_LINK_NAME` The link name of the kernel module tarball. This variable is set in - the ``meta/classes/kernel-artifact-names.bbclass`` file as follows: - :: + the ``meta/classes/kernel-artifact-names.bbclass`` file as follows:: MODULE_TARBALL_LINK_NAME ?= "${KERNEL_ARTIFACT_LINK_NAME}" The value of the ``KERNEL_ARTIFACT_LINK_NAME`` variable, which is set in the - same file, has the following value: - :: + same file, has the following value:: KERNEL_ARTIFACT_LINK_NAME ?= "${MACHINE}" @@ -4817,14 +4717,12 @@ system and gives an overview of their function and contents. :term:`MODULE_TARBALL_NAME` The base name of the kernel module tarball. This variable is set in - the ``meta/classes/kernel-artifact-names.bbclass`` file as follows: - :: + the ``meta/classes/kernel-artifact-names.bbclass`` file as follows:: MODULE_TARBALL_NAME ?= "${KERNEL_ARTIFACT_NAME}" The value of the :term:`KERNEL_ARTIFACT_NAME` variable, - which is set in the same file, has the following value: - :: + which is set in the same file, has the following value:: KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" @@ -4834,14 +4732,13 @@ system and gives an overview of their function and contents. target systems to be put into different subdirectories of the same output directory. - The default value of this variable is: - :: + The default value of this variable is:: ${PACKAGE_ARCH}${TARGET_VENDOR}-${TARGET_OS} Some classes (e.g. :ref:`cross-canadian <ref-classes-cross-canadian>`) modify the - ``MULTIMACH_TARGET_SYS`` value. + :term:`MULTIMACH_TARGET_SYS` value. See the :term:`STAMP` variable for an example. See the :term:`STAGING_DIR_TARGET` variable for more information. @@ -4866,23 +4763,21 @@ system and gives an overview of their function and contents. :term:`NO_GENERIC_LICENSE` Avoids QA errors when you use a non-common, non-CLOSED license in a - recipe. Packages exist, such as the linux-firmware package, with many + recipe. There are packages, such as the linux-firmware package, with many licenses that are not in any way common. Also, new licenses are added occasionally to avoid introducing a lot of common license files, which are only applicable to a specific package. - ``NO_GENERIC_LICENSE`` is used to allow copying a license that does + :term:`NO_GENERIC_LICENSE` is used to allow copying a license that does not exist in common licenses. - The following example shows how to add ``NO_GENERIC_LICENSE`` to a - recipe: - :: + The following example shows how to add :term:`NO_GENERIC_LICENSE` to a + recipe:: NO_GENERIC_LICENSE[license_name] = "license_file_in_fetched_source" - The following is an example that + Here is an example that uses the ``LICENSE.Abilis.txt`` file as the license from the fetched - source: - :: + source:: NO_GENERIC_LICENSE[Firmware-Abilis] = "LICENSE.Abilis.txt" @@ -4890,13 +4785,13 @@ system and gives an overview of their function and contents. Prevents installation of all "recommended-only" packages. Recommended-only packages are packages installed only through the :term:`RRECOMMENDS` variable). Setting the - ``NO_RECOMMENDATIONS`` variable to "1" turns this feature on: :: + :term:`NO_RECOMMENDATIONS` variable to "1" turns this feature on:: NO_RECOMMENDATIONS = "1" You can set this variable globally in your ``local.conf`` file or you can attach it to a specific image recipe by using the recipe name - override: :: + override:: NO_RECOMMENDATIONS_pn-target_image = "1" @@ -4912,8 +4807,8 @@ system and gives an overview of their function and contents. functionality, such as kernel modules. It is up to you to add packages with the :term:`IMAGE_INSTALL` variable. - Support for this variable exists only when using the IPK and RPM - packaging backend. Support does not exist for DEB. + This variable is only supported when using the IPK and RPM + packaging backends. DEB is not supported. See the :term:`BAD_RECOMMENDATIONS` and the :term:`PACKAGE_EXCLUDE` variables for @@ -4922,15 +4817,21 @@ system and gives an overview of their function and contents. :term:`NOAUTOPACKAGEDEBUG` Disables auto package from splitting ``.debug`` files. If a recipe requires ``FILES_${PN}-dbg`` to be set manually, the - ``NOAUTOPACKAGEDEBUG`` can be defined allowing you to define the - content of the debug package. For example: - :: + :term:`NOAUTOPACKAGEDEBUG` can be defined allowing you to define the + content of the debug package. For example:: NOAUTOPACKAGEDEBUG = "1" FILES_${PN}-dev = "${includedir}/${QT_DIR_NAME}/Qt/*" FILES_${PN}-dbg = "/usr/src/debug/" FILES_${QT_BASE_NAME}-demos-doc = "${docdir}/${QT_DIR_NAME}/qch/qt.qch" + :term:`NON_MULTILIB_RECIPES` + A list of recipes that should not be built for multilib. OE-Core's + ``multilib.conf`` file defines a reasonable starting point for this + list with:: + + NON_MULTILIB_RECIPES = "grub grub-efi make-mod-scripts ovmf u-boot" + :term:`OBJCOPY` The minimal command and arguments to run ``objcopy``. @@ -4966,7 +4867,7 @@ system and gives an overview of their function and contents. value is "oe-init-build-env". If you use a custom script to set up your build environment, set the - ``OE_INIT_ENV_SCRIPT`` variable to its name. + :term:`OE_INIT_ENV_SCRIPT` variable to its name. :term:`OE_TERMINAL` Controls how the OpenEmbedded build system spawns interactive @@ -4989,7 +4890,7 @@ system and gives an overview of their function and contents. The directory from which the top-level build environment setup script is sourced. The Yocto Project provides a top-level build environment setup script: :ref:`structure-core-script`. When you run this - script, the ``OEROOT`` variable resolves to the directory that + script, the :term:`OEROOT` variable resolves to the directory that contains the script. For additional information on how this variable is used, see the @@ -5009,15 +4910,14 @@ system and gives an overview of their function and contents. A colon-separated list of overrides that currently apply. Overrides are a BitBake mechanism that allows variables to be selectively overridden at the end of parsing. The set of overrides in - ``OVERRIDES`` represents the "state" during building, which includes + :term:`OVERRIDES` represents the "state" during building, which includes the current recipe being built, the machine for which it is being built, and so forth. As an example, if the string "an-override" appears as an element in - the colon-separated list in ``OVERRIDES``, then the following + the colon-separated list in :term:`OVERRIDES`, then the following assignment will override ``FOO`` with the value "overridden" at the - end of parsing: - :: + end of parsing:: FOO_an-override = "overridden" @@ -5026,27 +4926,25 @@ system and gives an overview of their function and contents. section in the BitBake User Manual for more information on the overrides mechanism. - The default value of ``OVERRIDES`` includes the values of the + The default value of :term:`OVERRIDES` includes the values of the :term:`CLASSOVERRIDE`, :term:`MACHINEOVERRIDES`, and :term:`DISTROOVERRIDES` variables. Another important override included by default is ``pn-${PN}``. This override allows variables to be set for a single recipe within configuration - (``.conf``) files. Here is an example: - :: + (``.conf``) files. Here is an example:: FOO_pn-myrecipe = "myrecipe-specific value" .. note:: - An easy way to see what overrides apply is to search for ``OVERRIDES`` + An easy way to see what overrides apply is to search for :term:`OVERRIDES` in the output of the ``bitbake -e`` command. See the ":ref:`dev-manual/common-tasks:viewing variable values`" section in the Yocto Project Development Tasks Manual for more information. :term:`P` - The recipe name and version. ``P`` is comprised of the following: - :: + The recipe name and version. :term:`P` is comprised of the following:: ${PN}-${PV} @@ -5081,9 +4979,8 @@ system and gives an overview of their function and contents. However, if your recipe's output packages are built specific to the target machine rather than generally for the architecture of the - machine, you should set ``PACKAGE_ARCH`` to the value of - :term:`MACHINE_ARCH` in the recipe as follows: - :: + machine, you should set :term:`PACKAGE_ARCH` to the value of + :term:`MACHINE_ARCH` in the recipe as follows:: PACKAGE_ARCH = "${MACHINE_ARCH}" @@ -5091,11 +4988,11 @@ system and gives an overview of their function and contents. Specifies a list of architectures compatible with the target machine. This variable is set automatically and should not normally be hand-edited. Entries are separated using spaces and listed in order - of priority. The default value for ``PACKAGE_ARCHS`` is "all any + of priority. The default value for :term:`PACKAGE_ARCHS` is "all any noarch ${PACKAGE_EXTRA_ARCHS} ${MACHINE_ARCH}". :term:`PACKAGE_BEFORE_PN` - Enables easily adding packages to ``PACKAGES`` before ``${PN}`` so + Enables easily adding packages to :term:`PACKAGES` before ``${PN}`` so that those added packages can pick up files that would normally be included in the default package. @@ -5119,8 +5016,7 @@ system and gives an overview of their function and contents. The build system uses only the first argument in the list as the package manager when creating your image or SDK. However, packages will be created using any additional packaging classes you specify. - For example, if you use the following in your ``local.conf`` file: - :: + For example, if you use the following in your ``local.conf`` file:: PACKAGE_CLASSES ?= "package_ipk" @@ -5136,7 +5032,7 @@ system and gives an overview of their function and contents. creating ``*-dbg`` packages to be used with the GNU Project Debugger (GDB). - With the ``PACKAGE_DEBUG_SPLIT_STYLE`` variable, you can control + With the :term:`PACKAGE_DEBUG_SPLIT_STYLE` variable, you can control where debug information, which can include or exclude source files, is stored: @@ -5173,20 +5069,18 @@ system and gives an overview of their function and contents. are using :term:`IMAGE_FEATURES` to install ``dev-pkgs``, you might not want to install all packages from a particular multilib. If you find yourself in this situation, you can - use the ``PACKAGE_EXCLUDE_COMPLEMENTARY`` variable to specify regular + use the :term:`PACKAGE_EXCLUDE_COMPLEMENTARY` variable to specify regular expressions to match the packages you want to exclude. :term:`PACKAGE_EXCLUDE` Lists packages that should not be installed into an image. For - example: - :: + example:: PACKAGE_EXCLUDE = "package_name package_name package_name ..." You can set this variable globally in your ``local.conf`` file or you can attach it to a specific image recipe by using the recipe name - override: - :: + override:: PACKAGE_EXCLUDE_pn-target_image = "package_name" @@ -5198,8 +5092,8 @@ system and gives an overview of their function and contents. an iterative development process to remove specific components from a system. - Support for this variable exists only when using the IPK and RPM - packaging backend. Support does not exist for DEB. + This variable is supported only when using the IPK and RPM + packaging backends. DEB is not supported. See the :term:`NO_RECOMMENDATIONS` and the :term:`BAD_RECOMMENDATIONS` variables for @@ -5213,7 +5107,7 @@ system and gives an overview of their function and contents. :term:`PACKAGE_FEED_ARCHS` Optionally specifies the package architectures used as part of the package feed URIs during the build. When used, the - ``PACKAGE_FEED_ARCHS`` variable is appended to the final package feed + :term:`PACKAGE_FEED_ARCHS` variable is appended to the final package feed URI, which is constructed using the :term:`PACKAGE_FEED_URIS` and :term:`PACKAGE_FEED_BASE_PATHS` @@ -5221,17 +5115,16 @@ system and gives an overview of their function and contents. .. note:: - You can use the ``PACKAGE_FEED_ARCHS`` + You can use the :term:`PACKAGE_FEED_ARCHS` variable to whitelist specific package architectures. If you do not need to whitelist specific architectures, which is a common case, you can omit this variable. Omitting the variable results in all available architectures for the current machine being included into remote package feeds. - Consider the following example where the ``PACKAGE_FEED_URIS``, - ``PACKAGE_FEED_BASE_PATHS``, and ``PACKAGE_FEED_ARCHS`` variables are - defined in your ``local.conf`` file: - :: + Consider the following example where the :term:`PACKAGE_FEED_URIS`, + :term:`PACKAGE_FEED_BASE_PATHS`, and :term:`PACKAGE_FEED_ARCHS` variables are + defined in your ``local.conf`` file:: PACKAGE_FEED_URIS = "https://example.com/packagerepos/release \ https://example.com/packagerepos/updates" @@ -5253,15 +5146,14 @@ system and gives an overview of their function and contents. :term:`PACKAGE_FEED_BASE_PATHS` Specifies the base path used when constructing package feed URIs. The - ``PACKAGE_FEED_BASE_PATHS`` variable makes up the middle portion of a + :term:`PACKAGE_FEED_BASE_PATHS` variable makes up the middle portion of a package feed URI used by the OpenEmbedded build system. The base path lies between the :term:`PACKAGE_FEED_URIS` and :term:`PACKAGE_FEED_ARCHS` variables. - Consider the following example where the ``PACKAGE_FEED_URIS``, - ``PACKAGE_FEED_BASE_PATHS``, and ``PACKAGE_FEED_ARCHS`` variables are - defined in your ``local.conf`` file: - :: + Consider the following example where the :term:`PACKAGE_FEED_URIS`, + :term:`PACKAGE_FEED_BASE_PATHS`, and :term:`PACKAGE_FEED_ARCHS` variables are + defined in your ``local.conf`` file:: PACKAGE_FEED_URIS = "https://example.com/packagerepos/release \ https://example.com/packagerepos/updates" @@ -5284,14 +5176,13 @@ system and gives an overview of their function and contents. :term:`PACKAGE_FEED_URIS` Specifies the front portion of the package feed URI used by the OpenEmbedded build system. Each final package feed URI is comprised - of ``PACKAGE_FEED_URIS``, + of :term:`PACKAGE_FEED_URIS`, :term:`PACKAGE_FEED_BASE_PATHS`, and :term:`PACKAGE_FEED_ARCHS` variables. - Consider the following example where the ``PACKAGE_FEED_URIS``, - ``PACKAGE_FEED_BASE_PATHS``, and ``PACKAGE_FEED_ARCHS`` variables are - defined in your ``local.conf`` file: - :: + Consider the following example where the :term:`PACKAGE_FEED_URIS`, + :term:`PACKAGE_FEED_BASE_PATHS`, and :term:`PACKAGE_FEED_ARCHS` variables are + defined in your ``local.conf`` file:: PACKAGE_FEED_URIS = "https://example.com/packagerepos/release \ https://example.com/packagerepos/updates" @@ -5316,7 +5207,7 @@ system and gives an overview of their function and contents. installation into the image. Because the package manager controls actual installation of all - packages, the list of packages passed using ``PACKAGE_INSTALL`` is + packages, the list of packages passed using :term:`PACKAGE_INSTALL` is not the final list of packages that are actually installed. This variable is internal to the image construction code. Consequently, in general, you should use the @@ -5324,7 +5215,7 @@ system and gives an overview of their function and contents. packages for installation. The exception to this is when working with the :ref:`core-image-minimal-initramfs <ref-manual/images:images>` image. When working with an initial RAM filesystem (initramfs) image, - use the ``PACKAGE_INSTALL`` variable. For information on creating an + use the :term:`PACKAGE_INSTALL` variable. For information on creating an initramfs, see the ":ref:`dev-manual/common-tasks:building an initial ram filesystem (initramfs) image`" section in the Yocto Project Development Tasks Manual. @@ -5345,7 +5236,7 @@ system and gives an overview of their function and contents. post-installation or pre-installation script can execute at rootfs creation time rather than on the target but depends on a native tool in order to execute, you need to list the tools in - ``PACKAGE_WRITE_DEPS``. + :term:`PACKAGE_WRITE_DEPS`. For information on running post-installation scripts, see the ":ref:`dev-manual/common-tasks:post-installation scripts`" @@ -5353,11 +5244,10 @@ system and gives an overview of their function and contents. :term:`PACKAGECONFIG` This variable provides a means of enabling or disabling features of a - recipe on a per-recipe basis. ``PACKAGECONFIG`` blocks are defined in + recipe on a per-recipe basis. :term:`PACKAGECONFIG` blocks are defined in recipes when you specify features and then arguments that define feature behaviors. Here is the basic block structure (broken over - multiple lines for readability): - :: + multiple lines for readability):: PACKAGECONFIG ??= "f1 f2 f3 ..." PACKAGECONFIG[f1] = "\ @@ -5382,8 +5272,8 @@ system and gives an overview of their function and contents. :term:`PACKAGECONFIG_CONFARGS`) if the feature is enabled. - 2. Extra arguments that should be added to ``EXTRA_OECONF`` or - ``PACKAGECONFIG_CONFARGS`` if the feature is disabled. + 2. Extra arguments that should be added to :term:`EXTRA_OECONF` or + :term:`PACKAGECONFIG_CONFARGS` if the feature is disabled. 3. Additional build dependencies (:term:`DEPENDS`) that should be added if the feature is enabled. @@ -5395,10 +5285,10 @@ system and gives an overview of their function and contents. (:term:`RRECOMMENDS`) that should be added if the feature is enabled. - 6. Any conflicting (that is, mutually exclusive) ``PACKAGECONFIG`` + 6. Any conflicting (that is, mutually exclusive) :term:`PACKAGECONFIG` settings for this feature. - Consider the following ``PACKAGECONFIG`` block taken from the + Consider the following :term:`PACKAGECONFIG` block taken from the ``librsvg`` recipe. In this example the feature is ``gtk``, which has three arguments that determine the feature's behavior. :: @@ -5408,41 +5298,37 @@ system and gives an overview of their function and contents. The ``--with-gtk3`` and ``gtk+3`` arguments apply only if the feature is enabled. In this case, ``--with-gtk3`` is added to the configure - script argument list and ``gtk+3`` is added to ``DEPENDS``. On the + script argument list and ``gtk+3`` is added to :term:`DEPENDS`. On the other hand, if the feature is disabled say through a ``.bbappend`` file in another layer, then the second argument ``--without-gtk3`` is added to the configure script instead. - The basic ``PACKAGECONFIG`` structure previously described holds true + The basic :term:`PACKAGECONFIG` structure previously described holds true regardless of whether you are creating a block or changing a block. When creating a block, use the structure inside your recipe. - If you want to change an existing ``PACKAGECONFIG`` block, you can do + If you want to change an existing :term:`PACKAGECONFIG` block, you can do so one of two ways: - *Append file:* Create an append file named recipename\ ``.bbappend`` in your layer and override the value of - ``PACKAGECONFIG``. You can either completely override the - variable: - :: + :term:`PACKAGECONFIG`. You can either completely override the + variable:: PACKAGECONFIG = "f4 f5" - Or, you can just append the variable: - :: + Or, you can just append the variable:: PACKAGECONFIG_append = " f4" - *Configuration file:* This method is identical to changing the block through an append file except you edit your ``local.conf`` or ``mydistro.conf`` file. As with append files previously - described, you can either completely override the variable: - :: + described, you can either completely override the variable:: PACKAGECONFIG_pn-recipename = "f4 f5" - Or, you can just amend the variable: - :: + Or, you can just amend the variable:: PACKAGECONFIG_append_pn-recipename = " f4" @@ -5451,32 +5337,31 @@ system and gives an overview of their function and contents. :term:`PACKAGECONFIG` setting. Classes such as :ref:`autotools <ref-classes-autotools>` and - :ref:`cmake <ref-classes-cmake>` use ``PACKAGECONFIG_CONFARGS`` to - pass ``PACKAGECONFIG`` options to ``configure`` and ``cmake``, - respectively. If you are using ``PACKAGECONFIG`` but not a class that + :ref:`cmake <ref-classes-cmake>` use :term:`PACKAGECONFIG_CONFARGS` to + pass :term:`PACKAGECONFIG` options to ``configure`` and ``cmake``, + respectively. If you are using :term:`PACKAGECONFIG` but not a class that handles the ``do_configure`` task, then you need to use - ``PACKAGECONFIG_CONFARGS`` appropriately. + :term:`PACKAGECONFIG_CONFARGS` appropriately. :term:`PACKAGEGROUP_DISABLE_COMPLEMENTARY` For recipes inheriting the :ref:`packagegroup <ref-classes-packagegroup>` class, setting - ``PACKAGEGROUP_DISABLE_COMPLEMENTARY`` to "1" specifies that the + :term:`PACKAGEGROUP_DISABLE_COMPLEMENTARY` to "1" specifies that the normal complementary packages (i.e. ``-dev``, ``-dbg``, and so forth) should not be automatically created by the ``packagegroup`` recipe, which is the default behavior. :term:`PACKAGES` The list of packages the recipe creates. The default value is the - following: - :: + following:: ${PN}-dbg ${PN}-staticdev ${PN}-dev ${PN}-doc ${PN}-locale ${PACKAGE_BEFORE_PN} ${PN} During packaging, the :ref:`ref-tasks-package` task - goes through ``PACKAGES`` and uses the :term:`FILES` + goes through :term:`PACKAGES` and uses the :term:`FILES` variable corresponding to each package to assign files to the - package. If a file matches the ``FILES`` variable for more than one - package in ``PACKAGES``, it will be assigned to the earliest + package. If a file matches the :term:`FILES` variable for more than one + package in :term:`PACKAGES`, it will be assigned to the earliest (leftmost) package. Packages in the variable's list that are empty (i.e. where none of @@ -5488,10 +5373,10 @@ system and gives an overview of their function and contents. :term:`PACKAGES_DYNAMIC` A promise that your recipe satisfies runtime dependencies for optional modules that are found in other recipes. - ``PACKAGES_DYNAMIC`` does not actually satisfy the dependencies, it + :term:`PACKAGES_DYNAMIC` does not actually satisfy the dependencies, it only states that they should be satisfied. For example, if a hard, runtime dependency (:term:`RDEPENDS`) of another - package is satisfied at build time through the ``PACKAGES_DYNAMIC`` + package is satisfied at build time through the :term:`PACKAGES_DYNAMIC` variable, but a package with the module name is never actually produced, then the other package will be broken. Thus, if you attempt to include that package in an image, you will get a dependency @@ -5501,9 +5386,9 @@ system and gives an overview of their function and contents. Typically, if there is a chance that such a situation can occur and the package that is not created is valid without the dependency being satisfied, then you should use :term:`RRECOMMENDS` - (a soft runtime dependency) instead of ``RDEPENDS``. + (a soft runtime dependency) instead of :term:`RDEPENDS`. - For an example of how to use the ``PACKAGES_DYNAMIC`` variable when + For an example of how to use the :term:`PACKAGES_DYNAMIC` variable when you are splitting packages, see the ":ref:`dev-manual/common-tasks:handling optional module packaging`" section in the Yocto Project Development Tasks Manual. @@ -5527,7 +5412,7 @@ system and gives an overview of their function and contents. .. note:: - In order for ``PARALLEL_MAKE`` to be effective, ``make`` must be + In order for :term:`PARALLEL_MAKE` to be effective, ``make`` must be called with ``${``\ :term:`EXTRA_OEMAKE`\ ``}``. An easy way to ensure this is to use the ``oe_runmake`` function. @@ -5538,7 +5423,7 @@ system and gives an overview of their function and contents. If the software being built experiences dependency issues during the ``do_compile`` task that result in race conditions, you can clear - the ``PARALLEL_MAKE`` variable within the recipe as a workaround. For + the :term:`PARALLEL_MAKE` variable within the recipe as a workaround. For information on addressing race conditions, see the ":ref:`dev-manual/common-tasks:debugging parallel make races`" section in the Yocto Project Development Tasks Manual. @@ -5546,7 +5431,7 @@ system and gives an overview of their function and contents. For single socket systems (i.e. one CPU), you should not have to override this variable to gain optimal parallelism during builds. However, if you have very large systems that employ multiple physical - CPUs, you might want to make sure the ``PARALLEL_MAKE`` variable is + CPUs, you might want to make sure the :term:`PARALLEL_MAKE` variable is not set higher than "-j 20". For more information on speeding up builds, see the @@ -5561,14 +5446,14 @@ system and gives an overview of their function and contents. .. note:: - In order for ``PARALLEL_MAKEINST`` to be effective, ``make`` must + In order for :term:`PARALLEL_MAKEINST` to be effective, ``make`` must be called with ``${``\ :term:`EXTRA_OEMAKE`\ ``}``. An easy way to ensure this is to use the ``oe_runmake`` function. If the software being built experiences dependency issues during the ``do_install`` task that result in race conditions, you can - clear the ``PARALLEL_MAKEINST`` variable within the recipe as a + clear the :term:`PARALLEL_MAKEINST` variable within the recipe as a workaround. For information on addressing race conditions, see the ":ref:`dev-manual/common-tasks:debugging parallel make races`" section in the Yocto Project Development Tasks Manual. @@ -5594,8 +5479,7 @@ system and gives an overview of their function and contents. patched, it uses "patch". If you wish to use an alternative patching tool, set the variable in - the recipe using one of the following: - :: + the recipe using one of the following:: PATCHTOOL = "patch" PATCHTOOL = "quilt" @@ -5606,7 +5490,7 @@ system and gives an overview of their function and contents. variable is used to make upgrades possible when the versioning scheme changes in some backwards incompatible way. - ``PE`` is the default value of the :term:`PKGE` variable. + :term:`PE` is the default value of the :term:`PKGE` variable. :term:`PF` Specifies the recipe or package name and includes all version and @@ -5628,7 +5512,7 @@ system and gives an overview of their function and contents. .. note:: - When using the ``PKG`` variable, you must use a package name override. + When using the :term:`PKG` variable, you must use a package name override. For example, when the :ref:`debian <ref-classes-debian>` class renames the output package, it does so by setting @@ -5641,8 +5525,7 @@ system and gives an overview of their function and contents. :term:`PKGD` Points to the destination directory for files to be packaged before they are split into individual packages. This directory defaults to - the following: - :: + the following:: ${WORKDIR}/package @@ -5654,8 +5537,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-packagedata` task packages data for each recipe and installs it into this temporary, shared area. This directory defaults to the following, which you should not - change: - :: + change:: ${STAGING_DIR_HOST}/pkgdata @@ -5670,8 +5552,7 @@ system and gives an overview of their function and contents. :term:`PKGDEST` Points to the parent directory for files to be packaged after they have been split into individual packages. This directory defaults to - the following: - :: + the following:: ${WORKDIR}/packages-split @@ -5682,46 +5563,45 @@ system and gives an overview of their function and contents. :term:`PKGDESTWORK` Points to a temporary work area where the :ref:`ref-tasks-package` task saves package metadata. - The ``PKGDESTWORK`` location defaults to the following: - :: + The :term:`PKGDESTWORK` location defaults to the following:: ${WORKDIR}/pkgdata Do not change this default. The :ref:`ref-tasks-packagedata` task copies the - package metadata from ``PKGDESTWORK`` to + package metadata from :term:`PKGDESTWORK` to :term:`PKGDATA_DIR` to make it available globally. :term:`PKGE` - The epoch of the package(s) built by the recipe. By default, ``PKGE`` + The epoch of the package(s) built by the recipe. By default, :term:`PKGE` is set to :term:`PE`. :term:`PKGR` The revision of the package(s) built by the recipe. By default, - ``PKGR`` is set to :term:`PR`. + :term:`PKGR` is set to :term:`PR`. :term:`PKGV` The version of the package(s) built by the recipe. By default, - ``PKGV`` is set to :term:`PV`. + :term:`PKGV` is set to :term:`PV`. :term:`PN` This variable can have two separate functions depending on the context: a recipe name or a resulting package name. - ``PN`` refers to a recipe name in the context of a file used by the + :term:`PN` refers to a recipe name in the context of a file used by the OpenEmbedded build system as input to create a package. The name is normally extracted from the recipe file name. For example, if the - recipe is named ``expat_2.0.1.bb``, then the default value of ``PN`` + recipe is named ``expat_2.0.1.bb``, then the default value of :term:`PN` will be "expat". The variable refers to a package name in the context of a file created or produced by the OpenEmbedded build system. - If applicable, the ``PN`` variable also contains any special suffix + If applicable, the :term:`PN` variable also contains any special suffix or prefix. For example, using ``bash`` to build packages for the native machine, ``PN`` is ``bash-native``. Using ``bash`` to build - packages for the target and for Multilib, ``PN`` would be ``bash`` + packages for the target and for Multilib, :term:`PN` would be ``bash`` and ``lib64-bash``, respectively. :term:`PNBLACKLIST` @@ -5730,18 +5610,16 @@ system and gives an overview of their function and contents. :ref:`blacklist <ref-classes-blacklist>` class, which is inherited globally. - To prevent a recipe from being built, use the ``PNBLACKLIST`` + To prevent a recipe from being built, use the :term:`PNBLACKLIST` variable in your ``local.conf`` file. Here is an example that - prevents ``myrecipe`` from being built: - :: + prevents ``myrecipe`` from being built:: PNBLACKLIST[myrecipe] = "Not supported by our organization." :term:`POPULATE_SDK_POST_HOST_COMMAND` Specifies a list of functions to call once the OpenEmbedded build system has created the host part of the SDK. You can specify - functions separated by semicolons: - :: + functions separated by semicolons:: POPULATE_SDK_POST_HOST_COMMAND += "function; ... " @@ -5753,8 +5631,7 @@ system and gives an overview of their function and contents. :term:`POPULATE_SDK_POST_TARGET_COMMAND` Specifies a list of functions to call once the OpenEmbedded build system has created the target part of the SDK. You can specify - functions separated by semicolons: - :: + functions separated by semicolons:: POPULATE_SDK_POST_TARGET_COMMAND += "function; ... " @@ -5767,30 +5644,30 @@ system and gives an overview of their function and contents. The revision of the recipe. The default value for this variable is "r0". Subsequent revisions of the recipe conventionally have the values "r1", "r2", and so forth. When :term:`PV` increases, - ``PR`` is conventionally reset to "r0". + :term:`PR` is conventionally reset to "r0". .. note:: - The OpenEmbedded build system does not need the aid of ``PR`` + The OpenEmbedded build system does not need the aid of :term:`PR` to know when to rebuild a recipe. The build system uses the task :ref:`input checksums <overview-manual/concepts:checksums (signatures)>` along with the :ref:`stamp <structure-build-tmp-stamps>` and :ref:`overview-manual/concepts:shared state cache` mechanisms. - The ``PR`` variable primarily becomes significant when a package + The :term:`PR` variable primarily becomes significant when a package manager dynamically installs packages on an already built image. In - this case, ``PR``, which is the default value of + this case, :term:`PR`, which is the default value of :term:`PKGR`, helps the package manager distinguish which package is the most recent one in cases where many packages have the - same ``PV`` (i.e. ``PKGV``). A component having many packages with - the same ``PV`` usually means that the packages all install the same - upstream version, but with later (``PR``) version packages including + same :term:`PV` (i.e. :term:`PKGV`). A component having many packages with + the same :term:`PV` usually means that the packages all install the same + upstream version, but with later (:term:`PR`) version packages including packaging fixes. .. note:: - ``PR`` does not need to be increased for changes that do not change the + :term:`PR` does not need to be increased for changes that do not change the package contents or metadata. Because manually managing ``PR`` can be cumbersome and error-prone, @@ -5804,17 +5681,15 @@ system and gives an overview of their function and contents. preferred provider). You should always suffix this variable with the name of the provided item. And, you should define the variable using the preferred recipe's name (:term:`PN`). Here is a common - example: - :: + example:: PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" In the previous example, multiple recipes are providing "virtual/kernel". - The ``PREFERRED_PROVIDER`` variable is set with the name (``PN``) of + The :term:`PREFERRED_PROVIDER` variable is set with the name (:term:`PN`) of the recipe you prefer to provide "virtual/kernel". - Following are more examples: - :: + Following are more examples:: PREFERRED_PROVIDER_virtual/xserver = "xserver-xf86" PREFERRED_PROVIDER_virtual/libgl ?= "mesa" @@ -5825,9 +5700,9 @@ system and gives an overview of their function and contents. .. note:: - If you use a ``virtual/\*`` item with ``PREFERRED_PROVIDER``, then any + If you use a ``virtual/\*`` item with :term:`PREFERRED_PROVIDER`, then any recipe that :term:`PROVIDES` that item but is not selected (defined) - by ``PREFERRED_PROVIDER`` is prevented from building, which is usually + by :term:`PREFERRED_PROVIDER` is prevented from building, which is usually desirable since this mechanism is designed to select between mutually exclusive alternative providers. @@ -5838,12 +5713,11 @@ system and gives an overview of their function and contents. the first example below), and you should specify the :term:`PV` accordingly (`3.4.0` in the example). - The ``PREFERRED_VERSION`` variable supports limited wildcard use + The :term:`PREFERRED_VERSION` variable supports limited wildcard use through the "``%``" character. You can use the character to match any number of characters, which can be useful when specifying versions that contain long revision numbers that potentially change. Here are - two examples: - :: + two examples:: PREFERRED_VERSION_python = "3.4.0" PREFERRED_VERSION_linux-yocto = "5.0%" @@ -5857,42 +5731,37 @@ system and gives an overview of their function and contents. The specified version is matched against :term:`PV`, which does not necessarily match the version part of the recipe's filename. For example, consider two recipes ``foo_1.2.bb`` and ``foo_git.bb`` - where ``foo_git.bb`` contains the following assignment: - :: + where ``foo_git.bb`` contains the following assignment:: PV = "1.1+git${SRCPV}" In this case, the correct way to select - ``foo_git.bb`` is by using an assignment such as the following: - :: + ``foo_git.bb`` is by using an assignment such as the following:: PREFERRED_VERSION_foo = "1.1+git%" Compare that previous example - against the following incorrect example, which does not work: - :: + against the following incorrect example, which does not work:: PREFERRED_VERSION_foo = "git" - Sometimes the ``PREFERRED_VERSION`` variable can be set by + Sometimes the :term:`PREFERRED_VERSION` variable can be set by configuration files in a way that is hard to change. You can use :term:`OVERRIDES` to set a machine-specific - override. Here is an example: - :: + override. Here is an example:: PREFERRED_VERSION_linux-yocto_qemux86 = "5.0%" Although not recommended, worst case, you can also use the "forcevariable" override, which is the strongest override possible. - Here is an example: - :: + Here is an example:: PREFERRED_VERSION_linux-yocto_forcevariable = "5.0%" .. note:: The ``\_forcevariable`` override is not handled specially. This override - only works because the default value of ``OVERRIDES`` includes "forcevariable". + only works because the default value of :term:`OVERRIDES` includes "forcevariable". If a recipe with the specified version is not available, a warning message will be shown. See :term:`REQUIRED_VERSION` if you want this @@ -5902,19 +5771,18 @@ system and gives an overview of their function and contents. Specifies additional paths from which the OpenEmbedded build system gets source code. When the build system searches for source code, it first tries the local download directory. If that location fails, the - build system tries locations defined by ``PREMIRRORS``, the upstream + build system tries locations defined by :term:`PREMIRRORS`, the upstream source, and then locations specified by :term:`MIRRORS` in that order. Assuming your distribution (:term:`DISTRO`) is "poky", - the default value for ``PREMIRRORS`` is defined in the + the default value for :term:`PREMIRRORS` is defined in the ``conf/distro/poky.conf`` file in the ``meta-poky`` Git repository. Typically, you could add a specific server for the build system to attempt before any others by adding something like the following to the ``local.conf`` configuration file in the - :term:`Build Directory`: - :: + :term:`Build Directory`:: PREMIRRORS_prepend = "\ git://.*/.* http://www.yoctoproject.org/sources/ \n \ @@ -5931,12 +5799,12 @@ system and gives an overview of their function and contents. :term:`PRIORITY` Indicates the importance of a package. - ``PRIORITY`` is considered to be part of the distribution policy + :term:`PRIORITY` is considered to be part of the distribution policy because the importance of any given recipe depends on the purpose for - which the distribution is being produced. Thus, ``PRIORITY`` is not + which the distribution is being produced. Thus, :term:`PRIORITY` is not normally set within recipes. - You can set ``PRIORITY`` to "required", "standard", "extra", and + You can set :term:`PRIORITY` to "required", "standard", "extra", and "optional", which is the default. :term:`PRIVATE_LIBS` @@ -5950,8 +5818,7 @@ system and gives an overview of their function and contents. standard version of the library. Libraries specified in this variable should be specified by their - file name. For example, from the Firefox recipe in meta-browser: - :: + file name. For example, from the Firefox recipe in meta-browser:: PRIVATE_LIBS = "libmozjs.so \ libxpcom.so \ @@ -5967,20 +5834,19 @@ system and gives an overview of their function and contents. :term:`PROVIDES` A list of aliases by which a particular recipe can be known. By - default, a recipe's own ``PN`` is implicitly already in its - ``PROVIDES`` list and therefore does not need to mention that it - provides itself. If a recipe uses ``PROVIDES``, the additional + default, a recipe's own :term:`PN` is implicitly already in its + :term:`PROVIDES` list and therefore does not need to mention that it + provides itself. If a recipe uses :term:`PROVIDES`, the additional aliases are synonyms for the recipe and can be useful for satisfying dependencies of other recipes during the build as specified by - ``DEPENDS``. + :term:`DEPENDS`. - Consider the following example ``PROVIDES`` statement from the recipe - file ``eudev_3.2.9.bb``: - :: + Consider the following example :term:`PROVIDES` statement from the recipe + file ``eudev_3.2.9.bb``:: PROVIDES += "udev" - The ``PROVIDES`` statement + The :term:`PROVIDES` statement results in the "eudev" recipe also being available as simply "udev". .. note:: @@ -5990,12 +5856,12 @@ system and gives an overview of their function and contents. strictly necessary it is recommended to avoid confusion. In addition to providing recipes under alternate names, the - ``PROVIDES`` mechanism is also used to implement virtual targets. A + :term:`PROVIDES` mechanism is also used to implement virtual targets. A virtual target is a name that corresponds to some particular functionality (e.g. a Linux kernel). Recipes that provide the - functionality in question list the virtual target in ``PROVIDES``. + functionality in question list the virtual target in :term:`PROVIDES`. Recipes that depend on the functionality in question can include the - virtual target in ``DEPENDS`` to leave the choice of provider open. + virtual target in :term:`DEPENDS` to leave the choice of provider open. Conventionally, virtual targets have names on the form "virtual/function" (e.g. "virtual/kernel"). The slash is simply part @@ -6013,8 +5879,7 @@ system and gives an overview of their function and contents. the component that manages the ``/dev`` directory. Setting the "preferred provider" for runtime dependencies is as - simple as using the following assignment in a configuration file: - :: + simple as using the following assignment in a configuration file:: VIRTUAL-RUNTIME_dev_manager = "udev" @@ -6024,15 +5889,14 @@ system and gives an overview of their function and contents. The ``conf/local.conf.sample.extended`` configuration file in the :term:`Source Directory` shows how the - ``PRSERV_HOST`` variable is set: - :: + :term:`PRSERV_HOST` variable is set:: PRSERV_HOST = "localhost:0" You must set the variable if you want to automatically start a local :ref:`PR service <dev-manual/common-tasks:working with a pr service>`. You can - set ``PRSERV_HOST`` to other values to use a remote PR service. + set :term:`PRSERV_HOST` to other values to use a remote PR service. :term:`PSEUDO_IGNORE_PATHS` @@ -6054,12 +5918,12 @@ system and gives an overview of their function and contents. :term:`PV` The version of the recipe. The version is normally extracted from the recipe filename. For example, if the recipe is named - ``expat_2.0.1.bb``, then the default value of ``PV`` will be "2.0.1". - ``PV`` is generally not overridden within a recipe unless it is + ``expat_2.0.1.bb``, then the default value of :term:`PV` will be "2.0.1". + :term:`PV` is generally not overridden within a recipe unless it is building an unstable (i.e. development) version from a source code repository (e.g. Git or Subversion). - ``PV`` is the default value of the :term:`PKGV` variable. + :term:`PV` is the default value of the :term:`PKGV` variable. :term:`PYTHON_ABI` When used by recipes that inherit the @@ -6081,18 +5945,17 @@ system and gives an overview of their function and contents. When used by recipes that inherit the `distutils3 <ref-classes-distutils3>`, :ref:`setuptools3 <ref-classes-setuptools3>` classes, specifies the - major Python version being built. For Python 3.x, ``PYTHON_PN`` would + major Python version being built. For Python 3.x, :term:`PYTHON_PN` would be "python3". You do not have to set this variable as the OpenEmbedded build system automatically sets it for you. The variable allows recipes to use common infrastructure such as the - following: - :: + following:: DEPENDS += "${PYTHON_PN}-native" In the previous example, - the version of the dependency is ``PYTHON_PN``. + the version of the dependency is :term:`PYTHON_PN`. :term:`RANLIB` The minimal command and arguments to run ``ranlib``. @@ -6102,8 +5965,7 @@ system and gives an overview of their function and contents. will not be installed if conflicting packages are not first removed. Like all package-controlling variables, you must always use them in - conjunction with a package name override. Here is an example: - :: + conjunction with a package name override. Here is an example:: RCONFLICTS_${PN} = "another_conflicting_package_name" @@ -6111,8 +5973,7 @@ system and gives an overview of their function and contents. specifying versioned dependencies. Although the syntax varies depending on the packaging format, BitBake hides these differences from you. Here is the general syntax to specify versions with the - ``RCONFLICTS`` variable: - :: + :term:`RCONFLICTS` variable:: RCONFLICTS_${PN} = "package (operator version)" @@ -6125,8 +5986,7 @@ system and gives an overview of their function and contents. - >= For example, the following sets up a dependency on version 1.2 or - greater of the package ``foo``: - :: + greater of the package ``foo``:: RCONFLICTS_${PN} = "foo (>= 1.2)" @@ -6135,19 +5995,18 @@ system and gives an overview of their function and contents. packages that must be installed in order for the package to function correctly. As an example, the following assignment declares that the package ``foo`` needs the packages ``bar`` and ``baz`` to be - installed: - :: + installed:: RDEPENDS_foo = "bar baz" The most common types of package runtime dependencies are automatically detected and added. Therefore, - most recipes do not need to set ``RDEPENDS``. For more information, + most recipes do not need to set :term:`RDEPENDS`. For more information, see the ":ref:`overview-manual/concepts:automatically added runtime dependencies`" section in the Yocto Project Overview and Concepts Manual. - The practical effect of the above ``RDEPENDS`` assignment is that + The practical effect of the above :term:`RDEPENDS` assignment is that ``bar`` and ``baz`` will be declared as dependencies inside the package ``foo`` when it is written out by one of the :ref:`do_package_write_\* <ref-tasks-package_write_deb>` tasks. @@ -6158,27 +6017,26 @@ system and gives an overview of their function and contents. also install the packages on which it depends. To ensure that the packages ``bar`` and ``baz`` get built, the - previous ``RDEPENDS`` assignment also causes a task dependency to be + previous :term:`RDEPENDS` assignment also causes a task dependency to be added. This dependency is from the recipe's :ref:`ref-tasks-build` (not to be confused with :ref:`ref-tasks-compile`) task to the ``do_package_write_*`` task of the recipes that build ``bar`` and ``baz``. - The names of the packages you list within ``RDEPENDS`` must be the + The names of the packages you list within :term:`RDEPENDS` must be the names of other packages - they cannot be recipe names. Although package names and recipe names usually match, the important point - here is that you are providing package names within the ``RDEPENDS`` + here is that you are providing package names within the :term:`RDEPENDS` variable. For an example of the default list of packages created from a recipe, see the :term:`PACKAGES` variable. - Because the ``RDEPENDS`` variable applies to packages being built, + Because the :term:`RDEPENDS` variable applies to packages being built, you should always use the variable in a form with an attached package name (remember that a single recipe can build multiple packages). For example, suppose you are building a development package that depends on the ``perl`` package. In this case, you would use the following - ``RDEPENDS`` statement: - :: + :term:`RDEPENDS` statement:: RDEPENDS_${PN}-dev += "perl" @@ -6195,20 +6053,19 @@ system and gives an overview of their function and contents. ``${PN}`` when modifying ``RDEPENDS_${PN}-dev``. Use the "+=" operator rather than the "=" operator. - The package names you use with ``RDEPENDS`` must appear as they would - in the ``PACKAGES`` variable. The :term:`PKG` variable + The package names you use with :term:`RDEPENDS` must appear as they would + in the :term:`PACKAGES` variable. The :term:`PKG` variable allows a different name to be used for the final package (e.g. the :ref:`debian <ref-classes-debian>` class uses this to rename packages), but this final package name cannot be used with - ``RDEPENDS``, which makes sense as ``RDEPENDS`` is meant to be + :term:`RDEPENDS`, which makes sense as :term:`RDEPENDS` is meant to be independent of the package format used. BitBake, which the OpenEmbedded build system uses, supports specifying versioned dependencies. Although the syntax varies depending on the packaging format, BitBake hides these differences from you. Here is the general syntax to specify versions with the - ``RDEPENDS`` variable: - :: + :term:`RDEPENDS` variable:: RDEPENDS_${PN} = "package (operator version)" @@ -6224,12 +6081,11 @@ system and gives an overview of their function and contents. .. note:: - You can use ``EXTENDPKGV`` to provide a full package version + You can use :term:`EXTENDPKGV` to provide a full package version specification. For example, the following sets up a dependency on version 1.2 or - greater of the package ``foo``: - :: + greater of the package ``foo``:: RDEPENDS_${PN} = "foo (>= 1.2)" @@ -6246,8 +6102,8 @@ system and gives an overview of their function and contents. class, this variable identifies distribution features that must exist in the current configuration in order for the OpenEmbedded build system to build the recipe. In other words, if the - ``REQUIRED_DISTRO_FEATURES`` variable lists a feature that does not - appear in ``DISTRO_FEATURES`` within the current configuration, then + :term:`REQUIRED_DISTRO_FEATURES` variable lists a feature that does not + appear in :term:`DISTRO_FEATURES` within the current configuration, then the recipe will be skipped, and if the build system attempts to build the recipe then an error will be triggered. @@ -6270,8 +6126,7 @@ system and gives an overview of their function and contents. :term:`ROOT_HOME` Defines the root home directory. By default, this directory is set as - follows in the BitBake configuration file: - :: + follows in the BitBake configuration file:: ROOT_HOME ??= "/home/root" @@ -6284,8 +6139,7 @@ system and gives an overview of their function and contents. You can override the default by setting the variable in any layer or in the ``local.conf`` file. Because the default is set using a "weak" assignment (i.e. "??="), you can use either of the following forms to - define your override: - :: + define your override:: ROOT_HOME = "/root" ROOT_HOME ?= "/root" @@ -6297,14 +6151,13 @@ system and gives an overview of their function and contents. :term:`ROOTFS` Indicates a filesystem image to include as the root filesystem. - The ``ROOTFS`` variable is an optional variable used with the + The :term:`ROOTFS` variable is an optional variable used with the :ref:`image-live <ref-classes-image-live>` class. :term:`ROOTFS_POSTINSTALL_COMMAND` Specifies a list of functions to call after the OpenEmbedded build system has installed packages. You can specify functions separated by - semicolons: - :: + semicolons:: ROOTFS_POSTINSTALL_COMMAND += "function; ... " @@ -6317,8 +6170,7 @@ system and gives an overview of their function and contents. :term:`ROOTFS_POSTPROCESS_COMMAND` Specifies a list of functions to call once the OpenEmbedded build system has created the root filesystem. You can specify functions - separated by semicolons: - :: + separated by semicolons:: ROOTFS_POSTPROCESS_COMMAND += "function; ... " @@ -6333,8 +6185,7 @@ system and gives an overview of their function and contents. system has removed unnecessary packages. When runtime package management is disabled in the image, several packages are removed including ``base-passwd``, ``shadow``, and ``update-alternatives``. - You can specify functions separated by semicolons: - :: + You can specify functions separated by semicolons:: ROOTFS_POSTUNINSTALL_COMMAND += "function; ... " @@ -6347,8 +6198,7 @@ system and gives an overview of their function and contents. :term:`ROOTFS_PREPROCESS_COMMAND` Specifies a list of functions to call before the OpenEmbedded build system has created the root filesystem. You can specify functions - separated by semicolons: - :: + separated by semicolons:: ROOTFS_PREPROCESS_COMMAND += "function; ... " @@ -6362,16 +6212,15 @@ system and gives an overview of their function and contents. A list of package name aliases that a package also provides. These aliases are useful for satisfying runtime dependencies of other packages both during the build and on the target (as specified by - ``RDEPENDS``). + :term:`RDEPENDS`). .. note:: - A package's own name is implicitly already in its ``RPROVIDES`` list. + A package's own name is implicitly already in its :term:`RPROVIDES` list. As with all package-controlling variables, you must always use the variable in conjunction with a package name override. Here is an - example: - :: + example:: RPROVIDES_${PN} = "widget-abi-2" @@ -6380,44 +6229,42 @@ system and gives an overview of their function and contents. built. The package being built does not depend on this list of packages in order to successfully build, but rather uses them for extended usability. To specify runtime dependencies for packages, see - the ``RDEPENDS`` variable. + the :term:`RDEPENDS` variable. - The package manager will automatically install the ``RRECOMMENDS`` + The package manager will automatically install the :term:`RRECOMMENDS` list of packages when installing the built package. However, you can prevent listed packages from being installed by using the :term:`BAD_RECOMMENDATIONS`, :term:`NO_RECOMMENDATIONS`, and :term:`PACKAGE_EXCLUDE` variables. - Packages specified in ``RRECOMMENDS`` need not actually be produced. - However, a recipe must exist that provides each package, either + Packages specified in :term:`RRECOMMENDS` need not actually be produced. + However, there must be a recipe providing each package, either through the :term:`PACKAGES` or :term:`PACKAGES_DYNAMIC` variables or the :term:`RPROVIDES` variable, or an error will occur during the build. If such a recipe does exist and the package is not produced, the build continues without error. - Because the ``RRECOMMENDS`` variable applies to packages being built, + Because the :term:`RRECOMMENDS` variable applies to packages being built, you should always attach an override to the variable to specify the particular package whose usability is being extended. For example, suppose you are building a development package that is extended to support wireless functionality. In this case, you would use the - following: - :: + following:: RRECOMMENDS_${PN}-dev += "wireless_package_name" In the example, the package name (``${PN}-dev``) must appear as it would in - the ``PACKAGES`` namespace before any renaming of the output package + the :term:`PACKAGES` namespace before any renaming of the output package by classes such as ``debian.bbclass``. BitBake, which the OpenEmbedded build system uses, supports specifying versioned recommends. Although the syntax varies depending on the packaging format, BitBake hides these differences from you. Here is the general syntax to specify versions with the - ``RRECOMMENDS`` variable: - :: + :term:`RRECOMMENDS` variable:: RRECOMMENDS_${PN} = "package (operator version)" @@ -6430,8 +6277,7 @@ system and gives an overview of their function and contents. - >= For example, the following sets up a recommend on version 1.2 or - greater of the package ``foo``: - :: + greater of the package ``foo``:: RRECOMMENDS_${PN} = "foo (>= 1.2)" @@ -6440,11 +6286,10 @@ system and gives an overview of their function and contents. this variable to determine which package should be installed to replace other package(s) during an upgrade. In order to also have the other package(s) removed at the same time, you must add the name of - the other package to the ``RCONFLICTS`` variable. + the other package to the :term:`RCONFLICTS` variable. As with all package-controlling variables, you must use this variable - in conjunction with a package name override. Here is an example: - :: + in conjunction with a package name override. Here is an example:: RREPLACES_${PN} = "other_package_being_replaced" @@ -6452,8 +6297,7 @@ system and gives an overview of their function and contents. specifying versioned replacements. Although the syntax varies depending on the packaging format, BitBake hides these differences from you. Here is the general syntax to specify versions with the - ``RREPLACES`` variable: - :: + :term:`RREPLACES` variable:: RREPLACES_${PN} = "package (operator version)" @@ -6466,8 +6310,7 @@ system and gives an overview of their function and contents. - >= For example, the following sets up a replacement using version 1.2 - or greater of the package ``foo``: - :: + or greater of the package ``foo``:: RREPLACES_${PN} = "foo (>= 1.2)" @@ -6478,8 +6321,7 @@ system and gives an overview of their function and contents. As with all package-controlling variables, you must always use this variable in conjunction with a package name override. Here is an - example: - :: + example:: RSUGGESTS_${PN} = "useful_package another_package" @@ -6491,14 +6333,13 @@ system and gives an overview of their function and contents. version. If the source tarball extracts the code to a directory named anything other than ``${BPN}-${PV}``, or if the source code is fetched from an SCM such as Git or Subversion, then you must set - ``S`` in the recipe so that the OpenEmbedded build system knows where + :term:`S` in the recipe so that the OpenEmbedded build system knows where to find the unpacked source. As an example, assume a :term:`Source Directory` top-level folder named ``poky`` and a default Build Directory at ``poky/build``. In this case, the work directory the build system - uses to keep the unpacked recipe for ``db`` is the following: - :: + uses to keep the unpacked recipe for ``db`` is the following:: poky/build/tmp/work/qemux86-poky-linux/db/5.1.19-r3/db-5.1.19 @@ -6507,9 +6348,8 @@ system and gives an overview of their function and contents. This next example assumes a Git repository. By default, Git repositories are cloned to ``${WORKDIR}/git`` during :ref:`ref-tasks-fetch`. Since this path is different - from the default value of ``S``, you must set it specifically so the - source can be located: - :: + from the default value of :term:`S`, you must set it specifically so the + source can be located:: SRC_URI = "git://path/to/repo.git" S = "${WORKDIR}/git" @@ -6525,7 +6365,7 @@ system and gives an overview of their function and contents. been tested against. Identifiers consist of the host distributor ID followed by the release, as reported by the ``lsb_release`` tool or as read from ``/etc/lsb-release``. Separate the list items with - explicit newline characters (``\n``). If ``SANITY_TESTED_DISTROS`` is + explicit newline characters (``\n``). If :term:`SANITY_TESTED_DISTROS` is not empty and the current value of :term:`NATIVELSBSTRING` does not appear in the list, then the build system reports a warning that indicates the @@ -6536,7 +6376,7 @@ system and gives an overview of their function and contents. set this variable. Instead, use :term:`SDKMACHINE`. :term:`SDK_CUSTOM_TEMPLATECONF` - When building the extensible SDK, if ``SDK_CUSTOM_TEMPLATECONF`` is set to + When building the extensible SDK, if :term:`SDK_CUSTOM_TEMPLATECONF` is set to "1" and a ``conf/templateconf.conf`` file exists in the build directory (:term:`TOPDIR`) then this will be copied into the SDK. @@ -6544,8 +6384,7 @@ system and gives an overview of their function and contents. The directory set up and used by the :ref:`populate_sdk_base <ref-classes-populate-sdk>` class to which the SDK is deployed. The ``populate_sdk_base`` class defines - ``SDK_DEPLOY`` as follows: - :: + :term:`SDK_DEPLOY` as follows:: SDK_DEPLOY = "${TMPDIR}/deploy/sdk" @@ -6553,15 +6392,14 @@ system and gives an overview of their function and contents. The parent directory used by the OpenEmbedded build system when creating SDK output. The :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` class defines - the variable as follows: - :: + the variable as follows:: SDK_DIR = "${WORKDIR}/sdk" .. note:: - The ``SDK_DIR`` directory is a temporary directory as it is part of - ``WORKDIR``. The final output directory is :term:`SDK_DEPLOY`. + The :term:`SDK_DIR` directory is a temporary directory as it is part of + :term:`WORKDIR`. The final output directory is :term:`SDK_DEPLOY`. :term:`SDK_EXT_TYPE` Controls whether or not shared state artifacts are copied into the @@ -6579,14 +6417,12 @@ system and gives an overview of their function and contents. The manifest file for the host part of the SDK. This file lists all the installed packages that make up the host part of the SDK. The file contains package information on a line-per-package basis as - follows: - :: + follows:: packagename packagearch version The :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` class - defines the manifest file as follows: - :: + defines the manifest file as follows:: SDK_HOST_MANIFEST = "${SDK_DEPLOY}/${TOOLCHAIN_OUTPUTNAME}.host.manifest" @@ -6602,7 +6438,7 @@ system and gives an overview of their function and contents. .. note:: - Enabling the ``SDK_INCLUDE_PKGDATA`` + Enabling the :term:`SDK_INCLUDE_PKGDATA` variable significantly increases build time because all of world needs to be built. Enabling the variable also slightly increases the size of the extensible SDK. @@ -6616,16 +6452,15 @@ system and gives an overview of their function and contents. IDE or from other tools and you do not want to perform additional steps to install the toolchain. - The ``SDK_INCLUDE_TOOLCHAIN`` variable defaults to "0" if - ``SDK_EXT_TYPE`` is set to "minimal", and defaults to "1" if - ``SDK_EXT_TYPE`` is set to "full". + The :term:`SDK_INCLUDE_TOOLCHAIN` variable defaults to "0" if + :term:`SDK_EXT_TYPE` is set to "minimal", and defaults to "1" if + :term:`SDK_EXT_TYPE` is set to "full". :term:`SDK_INHERIT_BLACKLIST` A list of classes to remove from the :term:`INHERIT` value globally within the extensible SDK configuration. The :ref:`populate-sdk-ext <ref-classes-populate-sdk-*>` class sets the - default value: - :: + default value:: SDK_INHERIT_BLACKLIST ?= "buildhistory icecc" @@ -6645,7 +6480,7 @@ system and gives an overview of their function and contents. build system is running and thus would be potentially problematic within the extensible SDK. - By default, ``SDK_LOCAL_CONF_BLACKLIST`` is set in the + By default, :term:`SDK_LOCAL_CONF_BLACKLIST` is set in the :ref:`populate-sdk-ext <ref-classes-populate-sdk-*>` class and excludes the following variables: @@ -6688,8 +6523,7 @@ system and gives an overview of their function and contents. :term:`DISTRO`, :term:`TCLIBC`, :term:`SDK_ARCH`, :term:`IMAGE_BASENAME`, and - :term:`TUNE_PKGARCH` variables: - :: + :term:`TUNE_PKGARCH` variables:: SDK_NAME = "${DISTRO}-${TCLIBC}-${SDK_ARCH}-${IMAGE_BASENAME}-${TUNE_PKGARCH}" @@ -6700,8 +6534,7 @@ system and gives an overview of their function and contents. :term:`SDK_OUTPUT` The location used by the OpenEmbedded build system when creating SDK output. The :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` - class defines the variable as follows: - :: + class defines the variable as follows:: SDK_DIR = "${WORKDIR}/sdk" SDK_OUTPUT = "${SDK_DIR}/image" @@ -6709,7 +6542,7 @@ system and gives an overview of their function and contents. .. note:: - The ``SDK_OUTPUT`` directory is a temporary directory as it is part of + The :term:`SDK_OUTPUT` directory is a temporary directory as it is part of :term:`WORKDIR` by way of :term:`SDK_DIR`. The final output directory is :term:`SDK_DEPLOY`. @@ -6717,7 +6550,7 @@ system and gives an overview of their function and contents. Specifies a list of architectures compatible with the SDK machine. This variable is set automatically and should not normally be hand-edited. Entries are separated using spaces and listed in order - of priority. The default value for ``SDK_PACKAGE_ARCHS`` is "all any + of priority. The default value for :term:`SDK_PACKAGE_ARCHS` is "all any noarch ${SDK_ARCH}-${SDKPKGSUFFIX}". :term:`SDK_POSTPROCESS_COMMAND` @@ -6732,7 +6565,7 @@ system and gives an overview of their function and contents. :term:`SDK_PREFIX` The toolchain binary prefix used for ``nativesdk`` recipes. The - OpenEmbedded build system uses the ``SDK_PREFIX`` value to set the + OpenEmbedded build system uses the :term:`SDK_PREFIX` value to set the :term:`TARGET_PREFIX` when building ``nativesdk`` recipes. The default value is "${SDK_SYS}-". @@ -6746,9 +6579,9 @@ system and gives an overview of their function and contents. - do_deploy Despite the default value of "" for the - ``SDK_RECRDEP_TASKS`` variable, the above four tasks are always added + :term:`SDK_RECRDEP_TASKS` variable, the above four tasks are always added to the SDK. To specify tasks beyond these four, you need to use the - ``SDK_RECRDEP_TASKS`` variable (e.g. you are defining additional + :term:`SDK_RECRDEP_TASKS` variable (e.g. you are defining additional tasks that are needed in order to build :term:`SDK_TARGETS`). @@ -6759,21 +6592,19 @@ system and gives an overview of their function and contents. The OpenEmbedded build system automatically sets this variable based on :term:`SDK_ARCH`, :term:`SDK_VENDOR`, and - :term:`SDK_OS`. You do not need to set the ``SDK_SYS`` + :term:`SDK_OS`. You do not need to set the :term:`SDK_SYS` variable yourself. :term:`SDK_TARGET_MANIFEST` The manifest file for the target part of the SDK. This file lists all the installed packages that make up the target part of the SDK. The file contains package information on a line-per-package basis as - follows: - :: + follows:: packagename packagearch version The :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` class - defines the manifest file as follows: - :: + defines the manifest file as follows:: SDK_TARGET_MANIFEST = "${SDK_DEPLOY}/${TOOLCHAIN_OUTPUTNAME}.target.manifest" @@ -6785,7 +6616,7 @@ system and gives an overview of their function and contents. standard or extensible SDK installation. The default value is "${PN}" (i.e. the image from which the SDK is built). - The ``SDK_TARGETS`` variable is an internal variable and typically + The :term:`SDK_TARGETS` variable is an internal variable and typically would not be changed. :term:`SDK_TITLE` @@ -6793,13 +6624,12 @@ system and gives an overview of their function and contents. this title is based on the :term:`DISTRO_NAME` or :term:`DISTRO` variable and is set in the :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` class as - follows: - :: + follows:: SDK_TITLE ??= "${@d.getVar('DISTRO_NAME') or d.getVar('DISTRO')} SDK" For the default distribution "poky", - ``SDK_TITLE`` is set to "Poky (Yocto Project Reference Distro)". + :term:`SDK_TITLE` is set to "Poky (Yocto Project Reference Distro)". For information on how to change this default title, see the ":ref:`sdk-manual/appendix-customizing:changing the extensible sdk installer title`" @@ -6817,8 +6647,7 @@ system and gives an overview of their function and contents. :term:`SDK_VERSION` Specifies the version of the SDK. The Poky distribution configuration file (``/meta-poky/conf/distro/poky.conf``) sets the default - ``SDK_VERSION`` as follows: - :: + :term:`SDK_VERSION` as follows:: SDK_VERSION = "${@d.getVar('DISTRO_VERSION').replace('snapshot-${METADATA_REVISION}', 'snapshot')}" @@ -6831,13 +6660,12 @@ system and gives an overview of their function and contents. default, this directory is based on the :term:`DISTRO` variable and is set in the :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` class as - follows: - :: + follows:: SDKEXTPATH ??= "~/${@d.getVar('DISTRO')}_sdk" For the - default distribution "poky", the ``SDKEXTPATH`` is set to "poky_sdk". + default distribution "poky", the :term:`SDKEXTPATH` is set to "poky_sdk". For information on how to change this default directory, see the ":ref:`sdk-manual/appendix-customizing:changing the default sdk installation directory`" @@ -6845,16 +6673,15 @@ system and gives an overview of their function and contents. Extensible Software Development Kit (eSDK) manual. :term:`SDKIMAGE_FEATURES` - Equivalent to ``IMAGE_FEATURES``. However, this variable applies to - the SDK generated from an image using the following command: - :: + Equivalent to :term:`IMAGE_FEATURES`. However, this variable applies to + the SDK generated from an image using the following command:: $ bitbake -c populate_sdk imagename :term:`SDKMACHINE` The machine for which the SDK is built. In other words, the SDK is built such that it runs on the target you specify with the - ``SDKMACHINE`` value. The value points to a corresponding ``.conf`` + :term:`SDKMACHINE` value. The value points to a corresponding ``.conf`` file under ``conf/machine-sdk/``. You can use "i686" and "x86_64" as possible values for this variable. @@ -6866,7 +6693,7 @@ system and gives an overview of their function and contents. .. note:: - You cannot set the ``SDKMACHINE`` + You cannot set the :term:`SDKMACHINE` variable in your distribution configuration file. If you do, the configuration will not take affect. @@ -6891,30 +6718,28 @@ system and gives an overview of their function and contents. building for the target. The flags are passed through the default value of the :term:`TARGET_CFLAGS` variable. - The ``SELECTED_OPTIMIZATION`` variable takes the value of - ``FULL_OPTIMIZATION`` unless ``DEBUG_BUILD`` = "1". If that is the - case, the value of ``DEBUG_OPTIMIZATION`` is used. + The :term:`SELECTED_OPTIMIZATION` variable takes the value of + :term:`FULL_OPTIMIZATION` unless :term:`DEBUG_BUILD` = "1", in which + case the value of :term:`DEBUG_OPTIMIZATION` is used. :term:`SERIAL_CONSOLE` Defines a serial console (TTY) to enable using `getty <https://en.wikipedia.org/wiki/Getty_(Unix)>`__. Provide a value that specifies the baud rate followed by the TTY device name - separated by a space. You cannot specify more than one TTY device: - :: + separated by a space. You cannot specify more than one TTY device:: SERIAL_CONSOLE = "115200 ttyS0" .. note:: - The ``SERIAL_CONSOLE`` variable is deprecated. Please use the + The :term:`SERIAL_CONSOLE` variable is deprecated. Please use the :term:`SERIAL_CONSOLES` variable. :term:`SERIAL_CONSOLES` Defines a serial console (TTY) to enable using `getty <https://en.wikipedia.org/wiki/Getty_(Unix)>`__. Provide a value that specifies the baud rate followed by the TTY device name - separated by a semicolon. Use spaces to separate multiple devices: - :: + separated by a semicolon. Use spaces to separate multiple devices:: SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS1" @@ -6924,17 +6749,21 @@ system and gives an overview of their function and contents. ``/proc/console`` before enabling them using getty. This variable allows aliasing in the format: <device>:<alias>. If a device was listed as "sclp_line0" in ``/dev/`` and "ttyS0" was listed in - ``/proc/console``, you would do the following: :: + ``/proc/console``, you would do the following:: SERIAL_CONSOLES_CHECK = "slcp_line0:ttyS0" This variable is currently only supported with SysVinit (i.e. not - with systemd). + with systemd). Note that :term:`SERIAL_CONSOLES_CHECK` also requires + ``/etc/inittab`` to be writable when used with SysVinit. This makes it + incompatible with customizations such as the following:: + + EXTRA_IMAGE_FEATURES += "read-only-rootfs" :term:`SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS` A list of recipe dependencies that should not be used to determine signatures of tasks from one recipe when they depend on tasks from - another recipe. For example: :: + another recipe. For example:: SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS += "intone->mplayer2" @@ -6942,7 +6771,7 @@ system and gives an overview of their function and contents. You can use the special token ``"*"`` on the left-hand side of the dependency to match all recipes except the one on the right-hand - side. Here is an example: :: + side. Here is an example:: SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS += "*->quilt-native" @@ -7021,7 +6850,7 @@ system and gives an overview of their function and contents. :term:`SOURCE_MIRROR_FETCH` When you are fetching files to create a mirror of sources (i.e. - creating a source mirror), setting ``SOURCE_MIRROR_FETCH`` to "1" in + creating a source mirror), setting :term:`SOURCE_MIRROR_FETCH` to "1" in your ``local.conf`` configuration file ensures the source for all recipes are fetched regardless of whether or not a recipe is compatible with the configuration. A recipe is considered @@ -7033,7 +6862,7 @@ system and gives an overview of their function and contents. .. note:: - Do not set the ``SOURCE_MIRROR_FETCH`` + Do not set the :term:`SOURCE_MIRROR_FETCH` variable unless you are creating a source mirror. In other words, do not set the variable during a normal build. @@ -7044,19 +6873,18 @@ system and gives an overview of their function and contents. To use this variable, you must globally inherit the :ref:`own-mirrors <ref-classes-own-mirrors>` class and then provide - the URL to your mirrors. Here is the general syntax: - :: + the URL to your mirrors. Here is the general syntax:: INHERIT += "own-mirrors" SOURCE_MIRROR_URL = "http://example.com/my_source_mirror" .. note:: - You can specify only a single URL in ``SOURCE_MIRROR_URL``. + You can specify only a single URL in :term:`SOURCE_MIRROR_URL`. :term:`SPDXLICENSEMAP` Maps commonly used license names to their SPDX counterparts found in - ``meta/files/common-licenses/``. For the default ``SPDXLICENSEMAP`` + ``meta/files/common-licenses/``. For the default :term:`SPDXLICENSEMAP` mappings, see the ``meta/conf/licenses.conf`` file. For additional information, see the :term:`LICENSE` @@ -7076,8 +6904,7 @@ system and gives an overview of their function and contents. U-Boot recipe. The SPL file type is set to "null" by default in the ``u-boot.inc`` - file as follows: - :: + file as follows:: # Some versions of u-boot build an SPL (Second Program Loader) image that # should be packaged along with the u-boot binary as well as placed in the @@ -7088,7 +6915,7 @@ system and gives an overview of their function and contents. SPL_IMAGE ?= "${SPL_BINARYNAME}-${MACHINE}-${PV}-${PR}" SPL_SYMLINK ?= "${SPL_BINARYNAME}-${MACHINE}" - The ``SPL_BINARY`` variable helps form + The :term:`SPL_BINARY` variable helps form various ``SPL_*`` variables used by the OpenEmbedded build system. See the BeagleBone machine configuration example in the @@ -7101,7 +6928,7 @@ system and gives an overview of their function and contents. OpenEmbedded build system which bits to pull in for the build and how to pull them in. For example, if the recipe or append file only needs to fetch a tarball from the Internet, the recipe or append file uses - a single ``SRC_URI`` entry. On the other hand, if the recipe or + a single :term:`SRC_URI` entry. On the other hand, if the recipe or append file needs to fetch a tarball, apply two patches, and include a custom file, the recipe or append file would include four instances of the variable. @@ -7180,8 +7007,8 @@ system and gives an overview of their function and contents. - ``az://`` - Fetches files from an Azure Storage account. - Standard and recipe-specific options for ``SRC_URI`` exist. Here are - standard options: + There are standard and recipe-specific options for :term:`SRC_URI`. Here are + standard ones: - ``apply`` - Whether to apply the patch or not. The default action is to apply the patch. @@ -7199,19 +7026,19 @@ system and gives an overview of their function and contents. :term:`SRCDATE` is equal to or greater than ``mindate``. - - ``maxdate`` - Apply the patch only if ``SRCDATE`` is not later + - ``maxdate`` - Apply the patch only if :term:`SRCDATE` is not later than ``maxdate``. - - ``minrev`` - Apply the patch only if ``SRCREV`` is equal to or + - ``minrev`` - Apply the patch only if :term:`SRCREV` is equal to or greater than ``minrev``. - - ``maxrev`` - Apply the patch only if ``SRCREV`` is not later + - ``maxrev`` - Apply the patch only if :term:`SRCREV` is not later than ``maxrev``. - - ``rev`` - Apply the patch only if ``SRCREV`` is equal to + - ``rev`` - Apply the patch only if :term:`SRCREV` is equal to ``rev``. - - ``notrev`` - Apply the patch only if ``SRCREV`` is not equal to + - ``notrev`` - Apply the patch only if :term:`SRCREV` is not equal to ``rev``. Here are some additional options worth mentioning: @@ -7224,20 +7051,19 @@ system and gives an overview of their function and contents. the Git fetcher is used. - ``subdir`` - Places the file (or extracts its contents) into the - specified subdirectory of ``WORKDIR`` when the local (``file://``) + specified subdirectory of :term:`WORKDIR` when the local (``file://``) fetcher is used. - ``localdir`` - Places the file (or extracts its contents) into - the specified subdirectory of ``WORKDIR`` when the CVS fetcher is + the specified subdirectory of :term:`WORKDIR` when the CVS fetcher is used. - ``subpath`` - Limits the checkout to a specific subpath of the tree when using the Git fetcher is used. - ``name`` - Specifies a name to be used for association with - ``SRC_URI`` checksums or :term:`SRCREV` when you have more than one - file or git repository specified in ``SRC_URI``. For example: - :: + :term:`SRC_URI` checksums or :term:`SRCREV` when you have more than one + file or git repository specified in :term:`SRC_URI`. For example:: SRC_URI = "git://example.com/foo.git;name=first \ git://example.com/bar.git;name=second \ @@ -7254,7 +7080,7 @@ system and gives an overview of their function and contents. :term:`SRC_URI_OVERRIDES_PACKAGE_ARCH` By default, the OpenEmbedded build system automatically detects whether ``SRC_URI`` contains files that are machine-specific. If so, - the build system automatically changes ``PACKAGE_ARCH``. Setting this + the build system automatically changes :term:`PACKAGE_ARCH`. Setting this variable to "0" disables this behavior. :term:`SRCDATE` @@ -7266,18 +7092,16 @@ system and gives an overview of their function and contents. Returns the version string of the current package. This string is used to help define the value of :term:`PV`. - The ``SRCPV`` variable is defined in the ``meta/conf/bitbake.conf`` + The :term:`SRCPV` variable is defined in the ``meta/conf/bitbake.conf`` configuration file in the :term:`Source Directory` as - follows: - :: + follows:: SRCPV = "${@bb.fetch2.get_srcrev(d)}" - Recipes that need to define ``PV`` do so with the help of the - ``SRCPV``. For example, the ``ofono`` recipe (``ofono_git.bb``) + Recipes that need to define :term:`PV` do so with the help of the + :term:`SRCPV`. For example, the ``ofono`` recipe (``ofono_git.bb``) located in ``meta/recipes-connectivity`` in the Source Directory - defines ``PV`` as follows: - :: + defines :term:`PV` as follows:: PV = "0.12-git${SRCPV}" @@ -7286,26 +7110,50 @@ system and gives an overview of their function and contents. variable applies to Subversion, Git, Mercurial, and Bazaar only. Note that if you want to build a fixed revision and you want to avoid performing a query on the remote repository every time BitBake parses - your recipe, you should specify a ``SRCREV`` that is a full revision + your recipe, you should specify a :term:`SRCREV` that is a full revision identifier and not just a tag. .. note:: For information on limitations when inheriting the latest revision - of software using ``SRCREV``, see the :term:`AUTOREV` variable + of software using :term:`SRCREV`, see the :term:`AUTOREV` variable description and the ":ref:`dev-manual/common-tasks:automatically incrementing a package version number`" section, which is in the Yocto Project Development Tasks Manual. + :term:`SRCTREECOVEREDTASKS` + A list of tasks that are typically not relevant (and therefore skipped) + when building using the :ref:`externalsrc <ref-classes-externalsrc>` + class. The default value as set in that class file is the set of tasks + that are rarely needed when using external source:: + + SRCTREECOVEREDTASKS ?= "do_patch do_unpack do_fetch" + + The notable exception is when processing external kernel source as + defined in the :ref:`kernel-yocto <ref-classes-kernel-yocto>` + class file (formatted for aesthetics):: + + SRCTREECOVEREDTASKS += "\ + do_validate_branches \ + do_kernel_configcheck \ + do_kernel_checkout \ + do_fetch \ + do_unpack \ + do_patch \ + " + + See the associated :term:`EXTERNALSRC` and :term:`EXTERNALSRC_BUILD` + variables for more information. + :term:`SSTATE_DIR` The directory for the shared state cache. :term:`SSTATE_MIRROR_ALLOW_NETWORK` If set to "1", allows fetches from mirrors that are specified in :term:`SSTATE_MIRRORS` to work even when - fetching from the network is disabled by setting ``BB_NO_NETWORK`` to - "1". Using the ``SSTATE_MIRROR_ALLOW_NETWORK`` variable is useful if - you have set ``SSTATE_MIRRORS`` to point to an internal server for + fetching from the network is disabled by setting :term:`BB_NO_NETWORK` to + "1". Using the :term:`SSTATE_MIRROR_ALLOW_NETWORK` variable is useful if + you have set :term:`SSTATE_MIRRORS` to point to an internal server for your shared state cache, but you want to disable any other fetching from the network. @@ -7323,13 +7171,12 @@ system and gives an overview of their function and contents. When pointing to sstate build artifacts on another machine that uses a different GCC version for native builds, you must configure - ``SSTATE_MIRRORS`` with a regular expression that maps local search + :term:`SSTATE_MIRRORS` with a regular expression that maps local search paths to server paths. The paths need to take into account :term:`NATIVELSBSTRING` set by the :ref:`uninative <ref-classes-uninative>` class. For example, the following maps the local search path ``universal-4.9`` to the - server-provided path server_url_sstate_path: - :: + server-provided path server_url_sstate_path:: SSTATE_MIRRORS ?= "file://universal-4.9/(.*) http://server_url_sstate_path/universal-4.8/\1 \n" @@ -7353,8 +7200,8 @@ system and gives an overview of their function and contents. (sstate) object during the first stage of preparing the sysroots. That object is scanned for hardcoded paths for original installation locations. The list of files that are scanned for paths is controlled - by the ``SSTATE_SCAN_FILES`` variable. Typically, recipes add files - they want to be scanned to the value of ``SSTATE_SCAN_FILES`` rather + by the :term:`SSTATE_SCAN_FILES` variable. Typically, recipes add files + they want to be scanned to the value of :term:`SSTATE_SCAN_FILES` rather than the variable being comprehensively set. The :ref:`sstate <ref-classes-sstate>` class specifies the default list of files. @@ -7416,7 +7263,7 @@ system and gives an overview of their function and contents. .. note:: - Recipes should never write files directly under the ``STAGING_DIR`` + Recipes should never write files directly under the :term:`STAGING_DIR` directory because the OpenEmbedded build system manages the directory automatically. Instead, files should be installed to ``${``\ :term:`D`\ ``}`` within your recipe's :ref:`ref-tasks-install` @@ -7431,7 +7278,7 @@ system and gives an overview of their function and contents. files. Exceptions include ``-native`` recipes, where the ``do_populate_sysroot`` task instead uses :term:`STAGING_DIR_NATIVE`. Depending on - the type of recipe and the build target, ``STAGING_DIR_HOST`` can + the type of recipe and the build target, :term:`STAGING_DIR_HOST` can have the following values: - For recipes building for the target machine, the value is @@ -7449,7 +7296,7 @@ system and gives an overview of their function and contents. standard build environment variables such as :term:`CPPFLAGS` and :term:`CFLAGS` are set up so that both host paths - and ``STAGING_DIR_NATIVE`` are searched for libraries and + and :term:`STAGING_DIR_NATIVE` are searched for libraries and headers using, for example, GCC's ``-isystem`` option. Thus, the emphasis is that the ``STAGING_DIR*`` variables @@ -7457,7 +7304,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-configure`, :ref:`ref-tasks-compile`, and :ref:`ref-tasks-install`. Having the real system - root correspond to ``STAGING_DIR_HOST`` makes conceptual sense + root correspond to :term:`STAGING_DIR_HOST` makes conceptual sense for ``-native`` recipes, as they make use of host headers and libraries. @@ -7468,7 +7315,7 @@ system and gives an overview of their function and contents. :term:`STAGING_DIR_TARGET` Specifies the path to the sysroot used for the system for which the component generates code. For components that do not generate code, - which is the majority, ``STAGING_DIR_TARGET`` is set to match + which is the majority, :term:`STAGING_DIR_TARGET` is set to match :term:`STAGING_DIR_HOST`. Some recipes build binaries that can run on the target system but @@ -7477,8 +7324,8 @@ system and gives an overview of their function and contents. primary system is referred to as the "HOST" and the secondary, or different, system is referred to as the "TARGET". Thus, the binaries run on the "HOST" system and generate binaries for the "TARGET" - system. The ``STAGING_DIR_HOST`` variable points to the sysroot used - for the "HOST" system, while ``STAGING_DIR_TARGET`` points to the + system. The :term:`STAGING_DIR_HOST` variable points to the sysroot used + for the "HOST" system, while :term:`STAGING_DIR_TARGET` points to the sysroot used for the "TARGET" system. :term:`STAGING_ETCDIR_NATIVE` @@ -7503,7 +7350,7 @@ system and gives an overview of their function and contents. Points to the directory containing the kernel build artifacts. Recipes building software that needs to access kernel build artifacts (e.g. ``systemtap-uprobes``) can look in the directory specified with - the ``STAGING_KERNEL_BUILDDIR`` variable to find these artifacts + the :term:`STAGING_KERNEL_BUILDDIR` variable to find these artifacts after the kernel has been built. :term:`STAGING_KERNEL_DIR` @@ -7523,9 +7370,8 @@ system and gives an overview of their function and contents. Specifies the base path used to create recipe stamp files. The path to an actual stamp file is constructed by evaluating this string and then appending additional information. Currently, the default - assignment for ``STAMP`` as set in the ``meta/conf/bitbake.conf`` - file is: - :: + assignment for :term:`STAMP` as set in the ``meta/conf/bitbake.conf`` + file is:: STAMP = "${STAMPS_DIR}/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}" @@ -7551,8 +7397,8 @@ system and gives an overview of their function and contents. :term:`SUMMARY` The short (72 characters or less) summary of the binary package for packaging systems such as ``opkg``, ``rpm``, or ``dpkg``. By default, - ``SUMMARY`` is used to define the - :term:`DESCRIPTION` variable if ``DESCRIPTION`` is + :term:`SUMMARY` is used to define the + :term:`DESCRIPTION` variable if :term:`DESCRIPTION` is not set in the recipe. :term:`SVNDIR` @@ -7562,8 +7408,7 @@ system and gives an overview of their function and contents. :term:`SYSLINUX_DEFAULT_CONSOLE` Specifies the kernel boot default console. If you want to use a console other than the default, set this variable in your recipe as - follows where "X" is the console number you want to use: - :: + follows where "X" is the console number you want to use:: SYSLINUX_DEFAULT_CONSOLE = "console=ttyX" @@ -7582,8 +7427,7 @@ system and gives an overview of their function and contents. Specifies the alternate serial port or turns it off. To turn off serial, set this variable to an empty string in your recipe. The variable's default value is set in the - :ref:`syslinux <ref-classes-syslinux>` class as follows: - :: + :ref:`syslinux <ref-classes-syslinux>` class as follows:: SYSLINUX_SERIAL ?= "0 115200" @@ -7592,8 +7436,7 @@ system and gives an overview of their function and contents. :term:`SYSLINUX_SERIAL_TTY` Specifies the alternate console=tty... kernel boot argument. The variable's default value is set in the - :ref:`syslinux <ref-classes-syslinux>` class as follows: - :: + :ref:`syslinux <ref-classes-syslinux>` class as follows:: SYSLINUX_SERIAL_TTY ?= "console=ttyS0,115200" @@ -7616,8 +7459,7 @@ system and gives an overview of their function and contents. :term:`SYSROOT_DIRS` Directories that are staged into the sysroot by the :ref:`ref-tasks-populate_sysroot` task. By - default, the following directories are staged: - :: + default, the following directories are staged:: SYSROOT_DIRS = " \ ${includedir} \ @@ -7632,8 +7474,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-populate_sysroot` task. You can use this variable to exclude certain subdirectories of directories listed in :term:`SYSROOT_DIRS` from - staging. By default, the following directories are not staged: - :: + staging. By default, the following directories are not staged:: SYSROOT_DIRS_BLACKLIST = " \ ${mandir} \ @@ -7650,8 +7491,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-populate_sysroot` task for ``-native`` recipes, in addition to those specified in :term:`SYSROOT_DIRS`. By default, the following - extra directories are staged: - :: + extra directories are staged:: SYSROOT_DIRS_NATIVE = " \ ${bindir} \ @@ -7680,8 +7520,7 @@ system and gives an overview of their function and contents. :term:`SYSTEMD_SERVICE` should start automatically or not. By default, the service is enabled to automatically start at boot time. The default setting is in the - :ref:`systemd <ref-classes-systemd>` class as follows: - :: + :ref:`systemd <ref-classes-systemd>` class as follows:: SYSTEMD_AUTO_ENABLE ??= "enable" @@ -7689,11 +7528,10 @@ system and gives an overview of their function and contents. :term:`SYSTEMD_BOOT_CFG` When :term:`EFI_PROVIDER` is set to - "systemd-boot", the ``SYSTEMD_BOOT_CFG`` variable specifies the + "systemd-boot", the :term:`SYSTEMD_BOOT_CFG` variable specifies the configuration file that should be used. By default, the :ref:`systemd-boot <ref-classes-systemd-boot>` class sets the - ``SYSTEMD_BOOT_CFG`` as follows: - :: + :term:`SYSTEMD_BOOT_CFG` as follows:: SYSTEMD_BOOT_CFG ?= "${:term:`S`}/loader.conf" @@ -7702,12 +7540,11 @@ system and gives an overview of their function and contents. :term:`SYSTEMD_BOOT_ENTRIES` When :term:`EFI_PROVIDER` is set to - "systemd-boot", the ``SYSTEMD_BOOT_ENTRIES`` variable specifies a + "systemd-boot", the :term:`SYSTEMD_BOOT_ENTRIES` variable specifies a list of entry files (``*.conf``) to install that contain one boot entry per file. By default, the :ref:`systemd-boot <ref-classes-systemd-boot>` class sets the - ``SYSTEMD_BOOT_ENTRIES`` as follows: - :: + :term:`SYSTEMD_BOOT_ENTRIES` as follows:: SYSTEMD_BOOT_ENTRIES ?= "" @@ -7716,11 +7553,10 @@ system and gives an overview of their function and contents. :term:`SYSTEMD_BOOT_TIMEOUT` When :term:`EFI_PROVIDER` is set to - "systemd-boot", the ``SYSTEMD_BOOT_TIMEOUT`` variable specifies the + "systemd-boot", the :term:`SYSTEMD_BOOT_TIMEOUT` variable specifies the boot menu timeout in seconds. By default, the :ref:`systemd-boot <ref-classes-systemd-boot>` class sets the - ``SYSTEMD_BOOT_TIMEOUT`` as follows: - :: + :term:`SYSTEMD_BOOT_TIMEOUT` as follows:: SYSTEMD_BOOT_TIMEOUT ?= "10" @@ -7730,15 +7566,14 @@ system and gives an overview of their function and contents. :term:`SYSTEMD_PACKAGES` When inheriting the :ref:`systemd <ref-classes-systemd>` class, this variable locates the systemd unit files when they are not found - in the main recipe's package. By default, the ``SYSTEMD_PACKAGES`` + in the main recipe's package. By default, the :term:`SYSTEMD_PACKAGES` variable is set such that the systemd unit files are assumed to - reside in the recipes main package: - :: + reside in the recipes main package:: SYSTEMD_PACKAGES ?= "${PN}" If these unit files are not in this recipe's main package, you need - to use ``SYSTEMD_PACKAGES`` to list the package or packages in which + to use :term:`SYSTEMD_PACKAGES` to list the package or packages in which the build system can find the systemd unit files. :term:`SYSTEMD_SERVICE` @@ -7747,8 +7582,7 @@ system and gives an overview of their function and contents. When you specify this file in your recipe, use a package name override to indicate the package to which the value applies. Here is - an example from the connman recipe: - :: + an example from the connman recipe:: SYSTEMD_SERVICE_${PN} = "connman.service" @@ -7760,14 +7594,13 @@ system and gives an overview of their function and contents. (allowing login), assuming :term:`USE_VT` is not set to "0". - The default value for ``SYSVINIT_ENABLED_GETTYS`` is "1" (i.e. only + The default value for :term:`SYSVINIT_ENABLED_GETTYS` is "1" (i.e. only run a getty on the first virtual terminal). :term:`T` This variable points to a directory were BitBake places temporary files, which consist mostly of task logs and scripts, when building a - particular recipe. The variable is typically set as follows: - :: + particular recipe. The variable is typically set as follows:: T = "${WORKDIR}/temp" @@ -7775,7 +7608,7 @@ system and gives an overview of their function and contents. BitBake unpacks and builds the recipe. The default ``bitbake.conf`` file sets this variable. - The ``T`` variable is not to be confused with the + The :term:`T` variable is not to be confused with the :term:`TMPDIR` variable, which points to the root of the directory tree where BitBake places the output of an entire build. @@ -7799,29 +7632,28 @@ system and gives an overview of their function and contents. :term:`TARGET_AS_ARCH` Specifies architecture-specific assembler flags for the target - system. ``TARGET_AS_ARCH`` is initialized from + system. :term:`TARGET_AS_ARCH` is initialized from :term:`TUNE_ASARGS` by default in the BitBake - configuration file (``meta/conf/bitbake.conf``): - :: + configuration file (``meta/conf/bitbake.conf``):: TARGET_AS_ARCH = "${TUNE_ASARGS}" :term:`TARGET_CC_ARCH` Specifies architecture-specific C compiler flags for the target - system. ``TARGET_CC_ARCH`` is initialized from + system. :term:`TARGET_CC_ARCH` is initialized from :term:`TUNE_CCARGS` by default. .. note:: It is a common workaround to append :term:`LDFLAGS` to - ``TARGET_CC_ARCH`` in recipes that build software for the target that - would not otherwise respect the exported ``LDFLAGS`` variable. + :term:`TARGET_CC_ARCH` in recipes that build software for the target that + would not otherwise respect the exported :term:`LDFLAGS` variable. :term:`TARGET_CC_KERNEL_ARCH` This is a specific kernel compiler flag for a CPU or Application Binary Interface (ABI) tune. The flag is used rarely and only for cases where a userspace :term:`TUNE_CCARGS` is not - compatible with the kernel compilation. The ``TARGET_CC_KERNEL_ARCH`` + compatible with the kernel compilation. The :term:`TARGET_CC_KERNEL_ARCH` variable allows the kernel (and associated modules) to use a different configuration. See the ``meta/conf/machine/include/arm/feature-arm-thumb.inc`` file in the @@ -7833,8 +7665,8 @@ system and gives an overview of their function and contents. :term:`CFLAGS` is set to the value of this variable by default. - Additionally, the SDK's environment setup script sets the ``CFLAGS`` - variable in the environment to the ``TARGET_CFLAGS`` value so that + Additionally, the SDK's environment setup script sets the :term:`CFLAGS` + variable in the environment to the :term:`TARGET_CFLAGS` value so that executables built using the SDK also have the flags applied. :term:`TARGET_CPPFLAGS` @@ -7844,7 +7676,7 @@ system and gives an overview of their function and contents. value of this variable by default. Additionally, the SDK's environment setup script sets the - ``CPPFLAGS`` variable in the environment to the ``TARGET_CPPFLAGS`` + :term:`CPPFLAGS` variable in the environment to the :term:`TARGET_CPPFLAGS` value so that executables built using the SDK also have the flags applied. @@ -7855,7 +7687,7 @@ system and gives an overview of their function and contents. by default. Additionally, the SDK's environment setup script sets the - ``CXXFLAGS`` variable in the environment to the ``TARGET_CXXFLAGS`` + :term:`CXXFLAGS` variable in the environment to the :term:`TARGET_CXXFLAGS` value so that executables built using the SDK also have the flags applied. @@ -7867,10 +7699,9 @@ system and gives an overview of their function and contents. :term:`TARGET_LD_ARCH` Specifies architecture-specific linker flags for the target system. - ``TARGET_LD_ARCH`` is initialized from + :term:`TARGET_LD_ARCH` is initialized from :term:`TUNE_LDARGS` by default in the BitBake - configuration file (``meta/conf/bitbake.conf``): - :: + configuration file (``meta/conf/bitbake.conf``):: TARGET_LD_ARCH = "${TUNE_LDARGS}" @@ -7882,14 +7713,14 @@ system and gives an overview of their function and contents. Additionally, the SDK's environment setup script sets the :term:`LDFLAGS` variable in the environment to the - ``TARGET_LDFLAGS`` value so that executables built using the SDK also + :term:`TARGET_LDFLAGS` value so that executables built using the SDK also have the flags applied. :term:`TARGET_OS` Specifies the target's operating system. The variable can be set to "linux" for glibc-based systems (GNU C Library) and to "linux-musl" - for musl libc. For ARM/EABI targets, "linux-gnueabi" and - "linux-musleabi" possible values exist. + for musl libc. For ARM/EABI targets, the possible values are + "linux-gnueabi" and "linux-musleabi". :term:`TARGET_PREFIX` Specifies the prefix used for the toolchain binary target tools. @@ -7904,7 +7735,7 @@ system and gives an overview of their function and contents. value of ``BUILD_PREFIX``. - For native SDK recipes (``nativesdk``), the build system sets the - variable to the value of ``SDK_PREFIX``. + variable to the value of :term:`SDK_PREFIX`. :term:`TARGET_SYS` Specifies the system, including the architecture and the operating @@ -7918,7 +7749,7 @@ system and gives an overview of their function and contents. .. note:: - You do not need to set the ``TARGET_SYS`` variable yourself. + You do not need to set the :term:`TARGET_SYS` variable yourself. Consider these two examples: @@ -7949,11 +7780,11 @@ system and gives an overview of their function and contents. In the ``defaultsetup.conf`` file, the default value of ``TCLIBCAPPEND`` is "-${TCLIBC}". However, distros such as poky, which normally only support one ``libc`` variant, set - ``TCLIBCAPPEND`` to "" in their distro configuration file resulting + :term:`TCLIBCAPPEND` to "" in their distro configuration file resulting in no suffix being applied. :term:`TCMODE` - Specifies the toolchain selector. ``TCMODE`` controls the + Specifies the toolchain selector. :term:`TCMODE` controls the characteristics of the generated packages and images by telling the OpenEmbedded build system which toolchain profile to use. By default, the OpenEmbedded build system builds its own internal toolchain. The @@ -7962,7 +7793,7 @@ system and gives an overview of their function and contents. .. note:: - If ``TCMODE`` is set to a value other than "default", then it is your + If :term:`TCMODE` is set to a value other than "default", then it is your responsibility to ensure that the toolchain is compatible with the default toolchain. Using older or newer versions of these components might cause build problems. See the Release Notes for @@ -7972,7 +7803,7 @@ system and gives an overview of their function and contents. page on the Yocto Project website and click on the "RELEASE INFORMATION" link for the appropriate release. - The ``TCMODE`` variable is similar to :term:`TCLIBC`, + The :term:`TCMODE` variable is similar to :term:`TCLIBC`, which controls the variant of the GNU standard C library (``libc``) used during the build process: ``glibc`` or ``musl``. @@ -7998,7 +7829,7 @@ system and gives an overview of their function and contents. the :term:`TEST_EXPORT_ONLY` variable is set to "1". - The ``TEST_EXPORT_DIR`` variable defaults to + The :term:`TEST_EXPORT_DIR` variable defaults to ``"${TMPDIR}/testimage/${PN}"``. :term:`TEST_EXPORT_ONLY` @@ -8008,7 +7839,7 @@ system and gives an overview of their function and contents. :term:`TEST_LOG_DIR` Holds the SSH log and the boot log for QEMU machines. The - ``TEST_LOG_DIR`` variable defaults to ``"${WORKDIR}/testimage"``. + :term:`TEST_LOG_DIR` variable defaults to ``"${WORKDIR}/testimage"``. .. note:: @@ -8028,7 +7859,7 @@ system and gives an overview of their function and contents. For automated hardware testing, specifies additional arguments to pass through to the command specified in :term:`TEST_POWERCONTROL_CMD`. Setting - ``TEST_POWERCONTROL_EXTRA_ARGS`` is optional. You can use it if you + :term:`TEST_POWERCONTROL_EXTRA_ARGS` is optional. You can use it if you wish, for example, to separate the machine-specific and non-machine-specific parts of the arguments. @@ -8051,8 +7882,7 @@ system and gives an overview of their function and contents. program does. For example, to use the Picocom terminal program on serial device - ``/dev/ttyUSB0`` at 115200bps, you would set the variable as follows: - :: + ``/dev/ttyUSB0`` at 115200bps, you would set the variable as follows:: TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200" @@ -8060,7 +7890,7 @@ system and gives an overview of their function and contents. For automated hardware testing, specifies additional arguments to pass through to the command specified in :term:`TEST_SERIALCONTROL_CMD`. Setting - ``TEST_SERIALCONTROL_EXTRA_ARGS`` is optional. You can use it if you + :term:`TEST_SERIALCONTROL_EXTRA_ARGS` is optional. You can use it if you wish, for example, to separate the machine-specific and non-machine-specific parts of the command. @@ -8072,7 +7902,7 @@ system and gives an overview of their function and contents. .. note:: - The ``TEST_SERVER_IP`` variable is only used for a small number of + The :term:`TEST_SERVER_IP` variable is only used for a small number of tests such as the "dnf" test suite, which needs to download packages from ``WORKDIR/oe-rootfs-repo``. @@ -8089,9 +7919,8 @@ system and gives an overview of their function and contents. QEMU. Tests include ``ping``, ``ssh``, ``df`` among others. You can add - your own tests to the list of tests by appending ``TEST_SUITES`` as - follows: - :: + your own tests to the list of tests by appending :term:`TEST_SUITES` as + follows:: TEST_SUITES_append = " mytest" @@ -8110,8 +7939,7 @@ system and gives an overview of their function and contents. another test must appear later in the list than the test on which they depend. For example, if you append the list of tests with two tests (``test_A`` and ``test_B``) where ``test_B`` is dependent on - ``test_A``, then you must order the tests as follows: - :: + ``test_A``, then you must order the tests as follows:: TEST_SUITES = "test_A test_B" @@ -8121,8 +7949,7 @@ system and gives an overview of their function and contents. :term:`TEST_TARGET` Specifies the target controller to use when running tests against a - test image. The default controller to use is "qemu": - :: + test image. The default controller to use is "qemu":: TEST_TARGET = "qemu" @@ -8131,7 +7958,7 @@ system and gives an overview of their function and contents. the controllers by adding a module in the layer's ``/lib/oeqa/controllers`` directory and by inheriting the ``BaseTarget`` class, which is an abstract class that cannot be used - as a value of ``TEST_TARGET``. + as a value of :term:`TEST_TARGET`. You can provide the following arguments with ``TEST_TARGET``: @@ -8156,13 +7983,12 @@ system and gives an overview of their function and contents. section in the Yocto Project Development Tasks Manual. :term:`TEST_TARGET_IP` - The IP address of your hardware under test. The ``TEST_TARGET_IP`` + The IP address of your hardware under test. The :term:`TEST_TARGET_IP` variable has no effect when :term:`TEST_TARGET` is set to "qemu". When you specify the IP address, you can also include a port. Here is - an example: - :: + an example:: TEST_TARGET_IP = "192.168.1.4:2201" @@ -8174,7 +8000,7 @@ system and gives an overview of their function and contents. :term:`TESTIMAGE_AUTO` Automatically runs the series of automated tests for images when an - image is successfully built. Setting ``TESTIMAGE_AUTO`` to "1" causes + image is successfully built. Setting :term:`TESTIMAGE_AUTO` to "1" causes any image that successfully builds to automatically boot under QEMU. Using the variable also adds in dependencies so that any SDK for which testing is requested is automatically built first. @@ -8206,24 +8032,23 @@ system and gives an overview of their function and contents. :term:`TMPDIR` This variable is the base directory the OpenEmbedded build system uses for all build output and intermediate files (other than the - shared state cache). By default, the ``TMPDIR`` variable points to + shared state cache). By default, the :term:`TMPDIR` variable points to ``tmp`` within the :term:`Build Directory`. If you want to establish this directory in a location other than the default, you can uncomment and edit the following statement in the - ``conf/local.conf`` file in the :term:`Source Directory`: - :: + ``conf/local.conf`` file in the :term:`Source Directory`:: #TMPDIR = "${TOPDIR}/tmp" - An example use for this scenario is to set ``TMPDIR`` to a local disk, + An example use for this scenario is to set :term:`TMPDIR` to a local disk, which does not use NFS, while having the Build Directory use NFS. - The filesystem used by ``TMPDIR`` must have standard filesystem + The filesystem used by :term:`TMPDIR` must have standard filesystem semantics (i.e. mixed-case files are unique, POSIX file locking, and persistent inodes). Due to various issues with NFS and bugs in some implementations, NFS does not meet this minimum requirement. - Consequently, ``TMPDIR`` cannot be on NFS. + Consequently, :term:`TMPDIR` cannot be on NFS. :term:`TOOLCHAIN_HOST_TASK` This variable lists packages the OpenEmbedded build system uses when @@ -8231,8 +8056,7 @@ system and gives an overview of their function and contents. packages specified by this variable are part of the toolchain set that runs on the :term:`SDKMACHINE`, and each package should usually have the prefix ``nativesdk-``. For example, - consider the following command when building an SDK: - :: + consider the following command when building an SDK:: $ bitbake -c populate_sdk imagename @@ -8253,8 +8077,7 @@ system and gives an overview of their function and contents. :term:`TOOLCHAIN_OUTPUTNAME` This variable defines the name used for the toolchain output. The :ref:`populate_sdk_base <ref-classes-populate-sdk-*>` class sets - the ``TOOLCHAIN_OUTPUTNAME`` variable as follows: - :: + the :term:`TOOLCHAIN_OUTPUTNAME` variable as follows:: TOOLCHAIN_OUTPUTNAME ?= "${SDK_NAME}-toolchain-${SDK_VERSION}" @@ -8290,7 +8113,7 @@ system and gives an overview of their function and contents. variable is used where the architecture is needed in a value where underscores are not allowed, for example within package filenames. In this case, dash characters replace any underscore characters used in - ``TARGET_ARCH``. + :term:`TARGET_ARCH`. Do not edit this variable. @@ -8299,19 +8122,18 @@ system and gives an overview of their function and contents. ``arm``, ``armeb``, ``mips``, ``mips64``, and so forth). BitBake uses this value to setup configuration. - ``TUNE_ARCH`` definitions are specific to a given architecture. The + :term:`TUNE_ARCH` definitions are specific to a given architecture. The definitions can be a single static definition, or can be dynamically adjusted. You can see details for a given CPU family by looking at the architecture's ``README`` file. For example, the ``meta/conf/machine/include/mips/README`` file in the :term:`Source Directory` provides information for - ``TUNE_ARCH`` specific to the ``mips`` architecture. + :term:`TUNE_ARCH` specific to the ``mips`` architecture. - ``TUNE_ARCH`` is tied closely to + :term:`TUNE_ARCH` is tied closely to :term:`TARGET_ARCH`, which defines the target machine's architecture. The BitBake configuration file - (``meta/conf/bitbake.conf``) sets ``TARGET_ARCH`` as follows: - :: + (``meta/conf/bitbake.conf``) sets :term:`TARGET_ARCH` as follows:: TARGET_ARCH = "${TUNE_ARCH}" @@ -8329,12 +8151,11 @@ system and gives an overview of their function and contents. :term:`TUNE_ASARGS` Specifies architecture-specific assembler flags for the target system. The set of flags is based on the selected tune features. - ``TUNE_ASARGS`` is set using the tune include files, which are + :term:`TUNE_ASARGS` is set using the tune include files, which are typically under ``meta/conf/machine/include/`` and are influenced through :term:`TUNE_FEATURES`. For example, the ``meta/conf/machine/include/x86/arch-x86.inc`` file defines the flags - for the x86 architecture as follows: - :: + for the x86 architecture as follows:: TUNE_ASARGS += "${@bb.utils.contains("TUNE_FEATURES", "mx32", "-x32", "", d)}" @@ -8347,7 +8168,7 @@ system and gives an overview of their function and contents. :term:`TUNE_CCARGS` Specifies architecture-specific C compiler flags for the target system. The set of flags is based on the selected tune features. - ``TUNE_CCARGS`` is set using the tune include files, which are + :term:`TUNE_CCARGS` is set using the tune include files, which are typically under ``meta/conf/machine/include/`` and are influenced through :term:`TUNE_FEATURES`. @@ -8367,8 +8188,7 @@ system and gives an overview of their function and contents. are not conflicting and that they are supported. The BitBake configuration file (``meta/conf/bitbake.conf``) defines - ``TUNE_FEATURES`` as follows: - :: + :term:`TUNE_FEATURES` as follows:: TUNE_FEATURES ??= "${TUNE_FEATURES_tune-${DEFAULTTUNE}}" @@ -8377,12 +8197,11 @@ system and gives an overview of their function and contents. :term:`TUNE_LDARGS` Specifies architecture-specific linker flags for the target system. The set of flags is based on the selected tune features. - ``TUNE_LDARGS`` is set using the tune include files, which are + :term:`TUNE_LDARGS` is set using the tune include files, which are typically under ``meta/conf/machine/include/`` and are influenced through :term:`TUNE_FEATURES`. For example, the ``meta/conf/machine/include/x86/arch-x86.inc`` file defines the flags - for the x86 architecture as follows: - :: + for the x86 architecture as follows:: TUNE_LDARGS += "${@bb.utils.contains("TUNE_FEATURES", "mx32", "-m elf32_x86_64", "", d)}" @@ -8395,27 +8214,25 @@ system and gives an overview of their function and contents. :term:`TUNE_PKGARCH` The package architecture understood by the packaging system to define the architecture, ABI, and tuning of output packages. The specific - tune is defined using the "_tune" override as follows: - :: + tune is defined using the "_tune" override as follows:: TUNE_PKGARCH_tune-tune = "tune" These tune-specific package architectures are defined in the machine include files. Here is an example of the "core2-32" tuning as used in - the ``meta/conf/machine/include/tune-core2.inc`` file: - :: + the ``meta/conf/machine/include/tune-core2.inc`` file:: TUNE_PKGARCH_tune-core2-32 = "core2-32" :term:`TUNEABI` An underlying Application Binary Interface (ABI) used by a particular tuning in a given toolchain layer. Providers that use prebuilt - libraries can use the ``TUNEABI``, + libraries can use the :term:`TUNEABI`, :term:`TUNEABI_OVERRIDE`, and :term:`TUNEABI_WHITELIST` variables to check compatibility of tunings against their selection of libraries. - If ``TUNEABI`` is undefined, then every tuning is allowed. See the + If :term:`TUNEABI` is undefined, then every tuning is allowed. See the :ref:`sanity <ref-classes-sanity>` class to see how the variable is used. @@ -8423,7 +8240,7 @@ system and gives an overview of their function and contents. If set, the OpenEmbedded system ignores the :term:`TUNEABI_WHITELIST` variable. Providers that use prebuilt libraries can use the - ``TUNEABI_OVERRIDE``, ``TUNEABI_WHITELIST``, and + :term:`TUNEABI_OVERRIDE`, :term:`TUNEABI_WHITELIST`, and :term:`TUNEABI` variables to check compatibility of a tuning against their selection of libraries. @@ -8432,9 +8249,9 @@ system and gives an overview of their function and contents. :term:`TUNEABI_WHITELIST` A whitelist of permissible :term:`TUNEABI` values. If - ``TUNEABI_WHITELIST`` is not set, all tunes are allowed. Providers - that use prebuilt libraries can use the ``TUNEABI_WHITELIST``, - :term:`TUNEABI_OVERRIDE`, and ``TUNEABI`` + :term:`TUNEABI_WHITELIST` is not set, all tunes are allowed. Providers + that use prebuilt libraries can use the :term:`TUNEABI_WHITELIST`, + :term:`TUNEABI_OVERRIDE`, and :term:`TUNEABI` variables to check compatibility of a tuning against their selection of libraries. @@ -8449,8 +8266,7 @@ system and gives an overview of their function and contents. the :term:`Source Directory`. Here is an example from the ``meta/conf/machine/include/mips/arch-mips.inc`` include file that lists the "o32" and "n64" features as conflicting with the "n32" - feature: - :: + feature:: TUNECONFLICTS[n32] = "o32 n64" @@ -8459,8 +8275,7 @@ system and gives an overview of their function and contents. feature. The specified feature is stored as a flag. Valid features are specified in the machine include files (e.g. ``meta/conf/machine/include/arm/arch-arm.inc``). Here is an example - from that file: - :: + from that file:: TUNEVALID[bigendian] = "Enable big-endian mode." @@ -8481,43 +8296,42 @@ system and gives an overview of their function and contents. UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config" In this example, "sd" is selected as the configuration of the possible four for the - ``UBOOT_MACHINE``. The "sd" configuration defines - "mx6qsabreauto_config" as the value for ``UBOOT_MACHINE``, while the + :term:`UBOOT_MACHINE`. The "sd" configuration defines + "mx6qsabreauto_config" as the value for :term:`UBOOT_MACHINE`, while the "sdcard" specifies the ``IMAGE_FSTYPES`` to use for the U-Boot image. - For more information on how the ``UBOOT_CONFIG`` is handled, see the + For more information on how the :term:`UBOOT_CONFIG` is handled, see the :ref:`uboot-config <ref-classes-uboot-config>` class. :term:`UBOOT_DTB_LOADADDRESS` Specifies the load address for the dtb image used by U-Boot. During FIT - image creation, the ``UBOOT_DTB_LOADADDRESS`` variable is used in + image creation, the :term:`UBOOT_DTB_LOADADDRESS` variable is used in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to specify the load address to be used in creating the dtb sections of Image Tree Source for the FIT image. :term:`UBOOT_DTBO_LOADADDRESS` Specifies the load address for the dtbo image used by U-Boot. During FIT - image creation, the ``UBOOT_DTBO_LOADADDRESS`` variable is used in + image creation, the :term:`UBOOT_DTBO_LOADADDRESS` variable is used in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to specify the load address to be used in creating the dtbo sections of Image Tree Source for the FIT image. :term:`UBOOT_ENTRYPOINT` Specifies the entry point for the U-Boot image. During U-Boot image - creation, the ``UBOOT_ENTRYPOINT`` variable is passed as a + creation, the :term:`UBOOT_ENTRYPOINT` variable is passed as a command-line parameter to the ``uboot-mkimage`` utility. :term:`UBOOT_LOADADDRESS` Specifies the load address for the U-Boot image. During U-Boot image - creation, the ``UBOOT_LOADADDRESS`` variable is passed as a + creation, the :term:`UBOOT_LOADADDRESS` variable is passed as a command-line parameter to the ``uboot-mkimage`` utility. :term:`UBOOT_LOCALVERSION` Appends a string to the name of the local version of the U-Boot image. For example, assuming the version of the U-Boot image built was "2013.10", the full version string reported by U-Boot would be - "2013.10-yocto" given the following statement: - :: + "2013.10-yocto" given the following statement:: UBOOT_LOCALVERSION = "-yocto" @@ -8561,7 +8375,7 @@ system and gives an overview of their function and contents. :term:`UBOOT_RD_ENTRYPOINT` Specifies the entrypoint for the RAM disk image. During FIT image creation, the - ``UBOOT_RD_ENTRYPOINT`` variable is used + :term:`UBOOT_RD_ENTRYPOINT` variable is used in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to specify the entrypoint to be used in creating the Image Tree Source for the FIT image. @@ -8569,7 +8383,7 @@ system and gives an overview of their function and contents. :term:`UBOOT_RD_LOADADDRESS` Specifies the load address for the RAM disk image. During FIT image creation, the - ``UBOOT_RD_LOADADDRESS`` variable is used + :term:`UBOOT_RD_LOADADDRESS` variable is used in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to specify the load address to be used in creating the Image Tree Source for the FIT image. @@ -8607,20 +8421,19 @@ system and gives an overview of their function and contents. configure options are simply not passed to the configure script (e.g. should be removed from :term:`EXTRA_OECONF` or :term:`PACKAGECONFIG_CONFARGS`). - However, common options, for example, exist that are passed to all - configure scripts at a class level that might not be valid for some - configure scripts. It follows that no benefit exists in seeing a - warning about these options. For these cases, the options are added - to ``UNKNOWN_CONFIGURE_WHITELIST``. + However, there are common options that are passed to all + configure scripts at a class level, but might not be valid for some + configure scripts. Therefore warnings about these options are useless. + For these cases, the options are added to :term:`UNKNOWN_CONFIGURE_WHITELIST`. The configure arguments check that uses - ``UNKNOWN_CONFIGURE_WHITELIST`` is part of the + :term:`UNKNOWN_CONFIGURE_WHITELIST` is part of the :ref:`insane <ref-classes-insane>` class and is only enabled if the recipe inherits the :ref:`autotools <ref-classes-autotools>` class. :term:`UPDATERCPN` For recipes inheriting the - :ref:`update-rc.d <ref-classes-update-rc.d>` class, ``UPDATERCPN`` + :ref:`update-rc.d <ref-classes-update-rc.d>` class, :term:`UPDATERCPN` specifies the package that contains the initscript that is enabled. The default value is "${PN}". Given that almost all recipes that @@ -8634,7 +8447,7 @@ system and gives an overview of their function and contents. OpenEmbedded build system determines the latest upstream version by picking the latest tag from the list of all repository tags. - You can use the ``UPSTREAM_CHECK_GITTAGREGEX`` variable to provide a + You can use the :term:`UPSTREAM_CHECK_GITTAGREGEX` variable to provide a regular expression to filter only the relevant tags should the default filter not work correctly. :: @@ -8642,7 +8455,7 @@ system and gives an overview of their function and contents. UPSTREAM_CHECK_GITTAGREGEX = "git_tag_regex" :term:`UPSTREAM_CHECK_REGEX` - Use the ``UPSTREAM_CHECK_REGEX`` variable to specify a different + Use the :term:`UPSTREAM_CHECK_REGEX` variable to specify a different regular expression instead of the default one when the package checking system is parsing the page found using :term:`UPSTREAM_CHECK_URI`. @@ -8656,7 +8469,7 @@ system and gives an overview of their function and contents. the source code is provided from tarballs, the latest version is determined by fetching the directory listing where the tarball is and attempting to find a later tarball. When this approach does not work, - you can use ``UPSTREAM_CHECK_URI`` to provide a different URI that + you can use :term:`UPSTREAM_CHECK_URI` to provide a different URI that contains the link to the latest tarball. :: @@ -8664,8 +8477,8 @@ system and gives an overview of their function and contents. :term:`USE_DEVFS` Determines if ``devtmpfs`` is used for ``/dev`` population. The - default value used for ``USE_DEVFS`` is "1" when no value is - specifically set. Typically, you would set ``USE_DEVFS`` to "0" for a + default value used for :term:`USE_DEVFS` is "1" when no value is + specifically set. Typically, you would set :term:`USE_DEVFS` to "0" for a statically populated ``/dev`` directory. See the ":ref:`dev-manual/common-tasks:selecting a device manager`" section in @@ -8680,8 +8493,8 @@ system and gives an overview of their function and contents. virtual terminals in order to enable logging in through those terminals. - The default value used for ``USE_VT`` is "1" when no default value is - specifically set. Typically, you would set ``USE_VT`` to "0" in the + The default value used for :term:`USE_VT` is "1" when no default value is + specifically set. Typically, you would set :term:`USE_VT` to "0" in the machine configuration file for machines that do not have a graphical display attached and therefore do not need virtual terminal functionality. @@ -8691,8 +8504,7 @@ system and gives an overview of their function and contents. OpenEmbedded build system to enable extra features (e.g. ``buildstats``, ``image-mklibs``, and so forth). - The default list is set in your ``local.conf`` file: - :: + The default list is set in your ``local.conf`` file:: USER_CLASSES ?= "buildstats image-mklibs image-prelink" @@ -8709,11 +8521,10 @@ system and gives an overview of their function and contents. The default behavior for the build system is to dynamically apply ``uid`` and ``gid`` values. Consequently, the - ``USERADD_ERROR_DYNAMIC`` variable is by default not set. If you plan + :term:`USERADD_ERROR_DYNAMIC` variable is by default not set. If you plan on using statically assigned ``gid`` and ``uid`` values, you should - set the ``USERADD_ERROR_DYNAMIC`` variable in your ``local.conf`` - file as follows: - :: + set the :term:`USERADD_ERROR_DYNAMIC` variable in your ``local.conf`` + file as follows:: USERADD_ERROR_DYNAMIC = "error" @@ -8727,7 +8538,7 @@ system and gives an overview of their function and contents. .. note:: There is a difference in behavior between setting - ``USERADD_ERROR_DYNAMIC`` to ``error`` and setting it to ``warn``. + :term:`USERADD_ERROR_DYNAMIC` to ``error`` and setting it to ``warn``. When it is set to ``warn``, the build system will report a warning for every undefined ``uid`` and ``gid`` in any recipe. But when it is set to ``error``, it will only report errors for recipes that are actually @@ -8743,8 +8554,7 @@ system and gives an overview of their function and contents. When applying static group identification (``gid``) values, the OpenEmbedded build system looks in :term:`BBPATH` for a ``files/group`` file and then applies those ``uid`` values. Set the - variable as follows in your ``local.conf`` file: - :: + variable as follows in your ``local.conf`` file:: USERADD_GID_TABLES = "files/group" @@ -8761,14 +8571,13 @@ system and gives an overview of their function and contents. You must set this variable if the recipe inherits the class. For example, the following enables adding a user for the main package in - a recipe: - :: + a recipe:: USERADD_PACKAGES = "${PN}" .. note:: - It follows that if you are going to use the ``USERADD_PACKAGES`` + It follows that if you are going to use the :term:`USERADD_PACKAGES` variable, you need to set one or more of the :term:`USERADD_PARAM`, :term:`GROUPADD_PARAM`, or :term:`GROUPMEMS_PARAM` variables. @@ -8778,8 +8587,7 @@ system and gives an overview of their function and contents. the ``useradd`` command if you add a user to the system when the package is installed. - Here is an example from the ``dbus`` recipe: - :: + Here is an example from the ``dbus`` recipe:: USERADD_PARAM_${PN} = "--system --home ${localstatedir}/lib/dbus \ --no-create-home --shell /bin/false \ @@ -8797,8 +8605,7 @@ system and gives an overview of their function and contents. When applying static user identification (``uid``) values, the OpenEmbedded build system looks in :term:`BBPATH` for a ``files/passwd`` file and then applies those ``uid`` values. Set the - variable as follows in your ``local.conf`` file: - :: + variable as follows in your ``local.conf`` file:: USERADD_UID_TABLES = "files/passwd" @@ -8833,7 +8640,7 @@ system and gives an overview of their function and contents. Specifies the persistence of the target's ``/var/log`` directory, which is used to house postinstall target log files. - By default, ``VOLATILE_LOG_DIR`` is set to "yes", which means the + By default, :term:`VOLATILE_LOG_DIR` is set to "yes", which means the file is not persistent. You can override this setting by setting the variable to "no" to make the log directory persistent. @@ -8855,22 +8662,21 @@ system and gives an overview of their function and contents. :term:`WKS_FILE_DEPENDS` When placed in the recipe that builds your image, this variable lists - build-time dependencies. The ``WKS_FILE_DEPENDS`` variable is only + build-time dependencies. The :term:`WKS_FILE_DEPENDS` variable is only applicable when Wic images are active (i.e. when :term:`IMAGE_FSTYPES` contains entries related to Wic). If your recipe does not create Wic images, the variable has no effect. - The ``WKS_FILE_DEPENDS`` variable is similar to the + The :term:`WKS_FILE_DEPENDS` variable is similar to the :term:`DEPENDS` variable. When you use the variable in your recipe that builds the Wic image, dependencies you list in the - ``WKS_FILE_DEPENDS`` variable are added to the ``DEPENDS`` variable. + :term:`WKS_FILE_DEPENDS` variable are added to the :term:`DEPENDS` variable. - With the ``WKS_FILE_DEPENDS`` variable, you have the possibility to + With the :term:`WKS_FILE_DEPENDS` variable, you have the possibility to specify a list of additional dependencies (e.g. native tools, bootloaders, and so forth), that are required to build Wic images. - Following is an example: - :: + Following is an example:: WKS_FILE_DEPENDS = "some-native-tool" @@ -8884,8 +8690,7 @@ system and gives an overview of their function and contents. :term:`TMPDIR` directory structure and is specific to the recipe being built and the system for which it is being built. - The ``WORKDIR`` directory is defined as follows: - :: + The :term:`WORKDIR` directory is defined as follows:: ${TMPDIR}/work/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR} @@ -8904,8 +8709,7 @@ system and gives an overview of their function and contents. ``qemux86-poky-linux`` machine target system. Furthermore, suppose your recipe is named ``foo_1.3.0-r0.bb``. In this case, the work directory the build system uses to build the package would be as - follows: - :: + follows:: poky/build/tmp/work/qemux86-poky-linux/foo/1.3.0-r0 @@ -8916,6 +8720,6 @@ system and gives an overview of their function and contents. indirectly, includes "x11-base" in :term:`IMAGE_FEATURES`. - The default value of ``XSERVER``, if not specified in the machine + The default value of :term:`XSERVER`, if not specified in the machine configuration, is "xserver-xorg xf86-video-fbdev xf86-input-evdev". |