diff options
author | Jason M. Bills <jason.m.bills@linux.intel.com> | 2020-12-08 00:38:17 +0300 |
---|---|---|
committer | Jason M. Bills <jason.m.bills@linux.intel.com> | 2020-12-08 00:38:17 +0300 |
commit | 8d6ae7f2a817751fad151168fa10ce28ee0869d8 (patch) | |
tree | 281032f7ec07c41589aa094bd165cc2a98f2d3a7 /poky/documentation/sdk-manual/sdk-appendix-customizing.rst | |
parent | c16fb8893b19075db4bcf3b5bf33c1db8c3ca2bd (diff) | |
parent | 5da3c2284560a7e08ffafd03c5b5ba44a3242228 (diff) | |
download | openbmc-8d6ae7f2a817751fad151168fa10ce28ee0869d8.tar.xz |
Merge tag '0.26' of ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into update
Diffstat (limited to 'poky/documentation/sdk-manual/sdk-appendix-customizing.rst')
-rw-r--r-- | poky/documentation/sdk-manual/sdk-appendix-customizing.rst | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/poky/documentation/sdk-manual/sdk-appendix-customizing.rst b/poky/documentation/sdk-manual/sdk-appendix-customizing.rst new file mode 100644 index 000000000..7743e3c00 --- /dev/null +++ b/poky/documentation/sdk-manual/sdk-appendix-customizing.rst @@ -0,0 +1,377 @@ +.. SPDX-License-Identifier: CC-BY-2.0-UK + +****************************** +Customizing the Extensible SDK +****************************** + +This appendix describes customizations you can apply to the extensible +SDK. + +Configuring the Extensible SDK +============================== + +The extensible SDK primarily consists of a pre-configured copy of the +OpenEmbedded build system from which it was produced. Thus, the SDK's +configuration is derived using that build system and the filters shown +in the following list. When these filters are present, the OpenEmbedded +build system applies them against ``local.conf`` and ``auto.conf``: + +- Variables whose values start with "/" are excluded since the + assumption is that those values are paths that are likely to be + specific to the :term:`Build Host`. + +- Variables listed in + :term:`SDK_LOCAL_CONF_BLACKLIST` + are excluded. These variables are not allowed through from the + OpenEmbedded build system configuration into the extensible SDK + configuration. Typically, these variables are specific to the machine + on which the build system is running and could be problematic as part + of the extensible SDK configuration. + + For a list of the variables excluded by default, see the + :term:`SDK_LOCAL_CONF_BLACKLIST` + in the glossary of the Yocto Project Reference Manual. + +- Variables listed in + :term:`SDK_LOCAL_CONF_WHITELIST` + are included. Including a variable in the value of + ``SDK_LOCAL_CONF_WHITELIST`` overrides either of the previous two + filters. The default value is blank. + +- Classes inherited globally with + :term:`INHERIT` that are listed in + :term:`SDK_INHERIT_BLACKLIST` + are disabled. Using ``SDK_INHERIT_BLACKLIST`` to disable these + classes is the typical method to disable classes that are problematic + or unnecessary in the SDK context. The default value blacklists the + :ref:`buildhistory <ref-classes-buildhistory>` + and :ref:`icecc <ref-classes-icecc>` classes. + +Additionally, the contents of ``conf/sdk-extra.conf``, when present, are +appended to the end of ``conf/local.conf`` within the produced SDK, +without any filtering. The ``sdk-extra.conf`` file is particularly +useful if you want to set a variable value just for the SDK and not the +OpenEmbedded build system used to create the SDK. + +Adjusting the Extensible SDK to Suit Your Build Host's Setup +============================================================ + +In most cases, the extensible SDK defaults should work with your :term:`Build +Host`'s setup. +However, some cases exist for which you might consider making +adjustments: + +- If your SDK configuration inherits additional classes using the + :term:`INHERIT` variable and you + do not need or want those classes enabled in the SDK, you can + blacklist them by adding them to the + :term:`SDK_INHERIT_BLACKLIST` + variable as described in the fourth bullet of the previous section. + + .. note:: + + The default value of + SDK_INHERIT_BLACKLIST + is set using the "?=" operator. Consequently, you will need to + either define the entire list by using the "=" operator, or you + will need to append a value using either "_append" or the "+=" + operator. You can learn more about these operators in the " + Basic Syntax + " section of the BitBake User Manual. + + . + +- If you have classes or recipes that add additional tasks to the + standard build flow (i.e. the tasks execute as the recipe builds as + opposed to being called explicitly), then you need to do one of the + following: + + - After ensuring the tasks are :ref:`shared + state <overview-manual/overview-manual-concepts:shared state cache>` tasks (i.e. the + output of the task is saved to and can be restored from the shared + state cache) or ensuring the tasks are able to be produced quickly + from a task that is a shared state task, add the task name to the + value of + :term:`SDK_RECRDEP_TASKS`. + + - Disable the tasks if they are added by a class and you do not need + the functionality the class provides in the extensible SDK. To + disable the tasks, add the class to the ``SDK_INHERIT_BLACKLIST`` + variable as described in the previous section. + +- Generally, you want to have a shared state mirror set up so users of + the SDK can add additional items to the SDK after installation + without needing to build the items from source. See the "`Providing + Additional Installable Extensible SDK + Content <#sdk-providing-additional-installable-extensible-sdk-content>`__" + section for information. + +- If you want users of the SDK to be able to easily update the SDK, you + need to set the + :term:`SDK_UPDATE_URL` + variable. For more information, see the "`Providing Updates to the + Extensible SDK After + Installation <#sdk-providing-updates-to-the-extensible-sdk-after-installation>`__" + section. + +- If you have adjusted the list of files and directories that appear in + :term:`COREBASE` (other than + layers that are enabled through ``bblayers.conf``), then you must + list these files in + :term:`COREBASE_FILES` so + that the files are copied into the SDK. + +- If your OpenEmbedded build system setup uses a different environment + setup script other than + :ref:`structure-core-script`, then you must + set + :term:`OE_INIT_ENV_SCRIPT` + to point to the environment setup script you use. + + .. note:: + + You must also reflect this change in the value used for the + COREBASE_FILES + variable as previously described. + +Changing the Extensible SDK Installer Title +=========================================== + +You can change the displayed title for the SDK installer by setting the +:term:`SDK_TITLE` variable and then +rebuilding the the SDK installer. For information on how to build an SDK +installer, see the "`Building an SDK +Installer <#sdk-building-an-sdk-installer>`__" section. + +By default, this title is derived from +:term:`DISTRO_NAME` when it is +set. If the ``DISTRO_NAME`` variable is not set, the title is derived +from the :term:`DISTRO` variable. + +The +:ref:`populate_sdk_base <ref-classes-populate-sdk-*>` +class defines the default value of the ``SDK_TITLE`` variable as +follows: +:: + + SDK_TITLE ??= "${@d.getVar('DISTRO_NAME') or d.getVar('DISTRO')} SDK" + +While several ways exist to change this variable, an efficient method is +to set the variable in your distribution's configuration file. Doing so +creates an SDK installer title that applies across your distribution. As +an example, assume you have your own layer for your distribution named +"meta-mydistro" and you are using the same type of file hierarchy as +does the default "poky" distribution. If so, you could update the +``SDK_TITLE`` variable in the +``~/meta-mydistro/conf/distro/mydistro.conf`` file using the following +form: +:: + + SDK_TITLE = "your_title" + +Providing Updates to the Extensible SDK After Installation +========================================================== + +When you make changes to your configuration or to the metadata and if +you want those changes to be reflected in installed SDKs, you need to +perform additional steps. These steps make it possible for anyone using +the installed SDKs to update the installed SDKs by using the +``devtool sdk-update`` command: + +1. Create a directory that can be shared over HTTP or HTTPS. You can do + this by setting up a web server such as an `Apache HTTP + Server <https://en.wikipedia.org/wiki/Apache_HTTP_Server>`__ or + `Nginx <https://en.wikipedia.org/wiki/Nginx>`__ server in the cloud + to host the directory. This directory must contain the published SDK. + +2. Set the + :term:`SDK_UPDATE_URL` + variable to point to the corresponding HTTP or HTTPS URL. Setting + this variable causes any SDK built to default to that URL and thus, + the user does not have to pass the URL to the ``devtool sdk-update`` + command as described in the "`Applying Updates to an Installed + Extensible + SDK <#sdk-applying-updates-to-an-installed-extensible-sdk>`__" + section. + +3. Build the extensible SDK normally (i.e., use the + ``bitbake -c populate_sdk_ext`` imagename command). + +4. Publish the SDK using the following command: + :: + + $ oe-publish-sdk some_path/sdk-installer.sh path_to_shared_http_directory + + You must + repeat this step each time you rebuild the SDK with changes that you + want to make available through the update mechanism. + +Completing the above steps allows users of the existing installed SDKs +to simply run ``devtool sdk-update`` to retrieve and apply the latest +updates. See the "`Applying Updates to an Installed Extensible +SDK <#sdk-applying-updates-to-an-installed-extensible-sdk>`__" section +for further information. + +Changing the Default SDK Installation Directory +=============================================== + +When you build the installer for the Extensible SDK, the default +installation directory for the SDK is based on the +:term:`DISTRO` and +:term:`SDKEXTPATH` variables from +within the +:ref:`populate_sdk_base <ref-classes-populate-sdk-*>` +class as follows: +:: + + SDKEXTPATH ??= "~/${@d.getVar('DISTRO')}_sdk" + +You can +change this default installation directory by specifically setting the +``SDKEXTPATH`` variable. + +While a number of ways exist through which you can set this variable, +the method that makes the most sense is to set the variable in your +distribution's configuration file. Doing so creates an SDK installer +default directory that applies across your distribution. As an example, +assume you have your own layer for your distribution named +"meta-mydistro" and you are using the same type of file hierarchy as +does the default "poky" distribution. If so, you could update the +``SDKEXTPATH`` variable in the +``~/meta-mydistro/conf/distro/mydistro.conf`` file using the following +form: +:: + + SDKEXTPATH = "some_path_for_your_installed_sdk" + +After building your installer, running it prompts the user for +acceptance of the some_path_for_your_installed_sdk directory as the +default location to install the Extensible SDK. + +Providing Additional Installable Extensible SDK Content +======================================================= + +If you want the users of an extensible SDK you build to be able to add +items to the SDK without requiring the users to build the items from +source, you need to do a number of things: + +1. Ensure the additional items you want the user to be able to install + are already built: + + - Build the items explicitly. You could use one or more "meta" + recipes that depend on lists of other recipes. + + - Build the "world" target and set + ``EXCLUDE_FROM_WORLD_pn-``\ recipename for the recipes you do not + want built. See the + :term:`EXCLUDE_FROM_WORLD` + variable for additional information. + +2. Expose the ``sstate-cache`` directory produced by the build. + Typically, you expose this directory by making it available through + an `Apache HTTP + Server <https://en.wikipedia.org/wiki/Apache_HTTP_Server>`__ or + `Nginx <https://en.wikipedia.org/wiki/Nginx>`__ server. + +3. Set the appropriate configuration so that the produced SDK knows how + to find the configuration. The variable you need to set is + :term:`SSTATE_MIRRORS`: + :: + + SSTATE_MIRRORS = "file://.* http://example.com/some_path/sstate-cache/PATH" + + You can set the + ``SSTATE_MIRRORS`` variable in two different places: + + - If the mirror value you are setting is appropriate to be set for + both the OpenEmbedded build system that is actually building the + SDK and the SDK itself (i.e. the mirror is accessible in both + places or it will fail quickly on the OpenEmbedded build system + side, and its contents will not interfere with the build), then + you can set the variable in your ``local.conf`` or custom distro + configuration file. You can then "whitelist" the variable through + to the SDK by adding the following: + :: + + SDK_LOCAL_CONF_WHITELIST = "SSTATE_MIRRORS" + + - Alternatively, if you just want to set the ``SSTATE_MIRRORS`` + variable's value for the SDK alone, create a + ``conf/sdk-extra.conf`` file either in your + :term:`Build Directory` or within any + layer and put your ``SSTATE_MIRRORS`` setting within that file. + + .. note:: + + This second option is the safest option should you have any + doubts as to which method to use when setting + SSTATE_MIRRORS + . + +Minimizing the Size of the Extensible SDK Installer Download +============================================================ + +By default, the extensible SDK bundles the shared state artifacts for +everything needed to reconstruct the image for which the SDK was built. +This bundling can lead to an SDK installer file that is a Gigabyte or +more in size. If the size of this file causes a problem, you can build +an SDK that has just enough in it to install and provide access to the +``devtool command`` by setting the following in your configuration: +:: + + SDK_EXT_TYPE = "minimal" + +Setting +:term:`SDK_EXT_TYPE` to +"minimal" produces an SDK installer that is around 35 Mbytes in size, +which downloads and installs quickly. You need to realize, though, that +the minimal installer does not install any libraries or tools out of the +box. These libraries and tools must be installed either "on the fly" or +through actions you perform using ``devtool`` or explicitly with the +``devtool sdk-install`` command. + +In most cases, when building a minimal SDK you need to also enable +bringing in the information on a wider range of packages produced by the +system. Requiring this wider range of information is particularly true +so that ``devtool add`` is able to effectively map dependencies it +discovers in a source tree to the appropriate recipes. Additionally, the +information enables the ``devtool search`` command to return useful +results. + +To facilitate this wider range of information, you would need to set the +following: +:: + + SDK_INCLUDE_PKGDATA = "1" + +See the :term:`SDK_INCLUDE_PKGDATA` variable for additional information. + +Setting the ``SDK_INCLUDE_PKGDATA`` variable as shown causes the "world" +target to be built so that information for all of the recipes included +within it are available. Having these recipes available increases build +time significantly and increases the size of the SDK installer by 30-80 +Mbytes depending on how many recipes are included in your configuration. + +You can use ``EXCLUDE_FROM_WORLD_pn-``\ recipename for recipes you want +to exclude. However, it is assumed that you would need to be building +the "world" target if you want to provide additional items to the SDK. +Consequently, building for "world" should not represent undue overhead +in most cases. + +.. note:: + + If you set + SDK_EXT_TYPE + to "minimal", then providing a shared state mirror is mandatory so + that items can be installed as needed. See the " + Providing Additional Installable Extensible SDK Content + " section for more information. + +You can explicitly control whether or not to include the toolchain when +you build an SDK by setting the +:term:`SDK_INCLUDE_TOOLCHAIN` +variable to "1". In particular, it is useful to include the toolchain +when you have set ``SDK_EXT_TYPE`` to "minimal", which by default, +excludes the toolchain. Also, it is helpful if you are building a small +SDK for use with an IDE or some other tool where you do not want to take +extra steps to install a toolchain. |