diff options
author | Patrick Williams <patrick@stwcx.xyz> | 2015-09-15 22:41:29 +0300 |
---|---|---|
committer | Patrick Williams <patrick@stwcx.xyz> | 2015-09-15 22:41:29 +0300 |
commit | 21f9b84b4b729fbd7acbd465e7a3f726e4d20f91 (patch) | |
tree | eb2d091d427ca0813b445509d59cc8e27e8ad25f /yocto-poky/documentation/ref-manual/migration.xml | |
parent | 101cef31e2bf54c678501155cd2106251acbd076 (diff) | |
parent | c124f4f2e04dca16a428a76c89677328bc7bf908 (diff) | |
download | openbmc-21f9b84b4b729fbd7acbd465e7a3f726e4d20f91.tar.xz |
Merge commit 'c124f4f2e04dca16a428a76c89677328bc7bf908' as 'yocto-poky'
Diffstat (limited to 'yocto-poky/documentation/ref-manual/migration.xml')
-rw-r--r-- | yocto-poky/documentation/ref-manual/migration.xml | 2319 |
1 files changed, 2319 insertions, 0 deletions
diff --git a/yocto-poky/documentation/ref-manual/migration.xml b/yocto-poky/documentation/ref-manual/migration.xml new file mode 100644 index 000000000..dc75eb827 --- /dev/null +++ b/yocto-poky/documentation/ref-manual/migration.xml @@ -0,0 +1,2319 @@ +<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" +[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] > + +<chapter id='migration'> +<title>Migrating to a Newer Yocto Project Release</title> + + <para> + This chapter provides information you can use to migrate work to a + newer Yocto Project release. You can find the same information in the + release notes for a given release. + </para> + +<section id='general-migration-considerations'> + <title>General Migration Considerations</title> + + <para> + Some considerations are not tied to a specific Yocto Project + release. + This section presents information you should consider when + migrating to any new Yocto Project release. + <itemizedlist> + <listitem><para><emphasis>Dealing with Customized Recipes</emphasis>: + Issues could arise if you take older recipes that contain + customizations and simply copy them forward expecting them + to work after you migrate to new Yocto Project metadata. + For example, suppose you have a recipe in your layer that is + a customized version of a core recipe copied from the earlier + release, rather than through the use of an append file. + When you migrate to a newer version of Yocto Project, the + metadata (e.g. perhaps an include file used by the recipe) + could have changed in a way that would break the build. + Say, for example, a function is removed from an include file + and the customized recipe tries to call that function. + </para> + + <para>You could "forward-port" all your customizations in your + recipe so that everything works for the new release. + However, this is not the optimal solution as you would have + to repeat this process with each new release if changes + occur that give rise to problems.</para> + + <para>The better solution (where practical) is to use append + files (<filename>*.bbappend</filename>) to capture any + customizations you want to make to a recipe. + Doing so, isolates your changes from the main recipe making + them much more manageable. + However, sometimes it is not practical to use an append + file. + A good example of this is when introducing a newer or older + version of a recipe in another layer.</para> + </listitem> + <listitem><para><emphasis>Updating Append Files</emphasis>: + Since append files generally only contain your customizations, + they often do not need to be adjusted for new releases. + However, if the <filename>.bbappend</filename> file is + specific to a particular version of the recipe (i.e. its + name does not use the % wildcard) and the version of the + recipe to which it is appending has changed, then you will + at a minimum need to rename the append file to match the + name of the recipe file. + A mismatch between an append file and its corresponding + recipe file (<filename>.bb</filename>) will + trigger an error during parsing.</para> + <para>Depending on the type of customization the append file + applies, other incompatibilities might occur when you + upgrade. + For example, if your append file applies a patch and the + recipe to which it is appending is updated to a newer + version, the patch might no longer apply. + If this is the case and assuming the patch is still needed, + you must modify the patch file so that it does apply. + </para></listitem> + </itemizedlist> + </para> +</section> + +<section id='moving-to-the-yocto-project-1.3-release'> + <title>Moving to the Yocto Project 1.3 Release</title> + + <para> + This section provides migration information for moving to the + Yocto Project 1.3 Release from the prior release. + </para> + + <section id='1.3-local-configuration'> + <title>Local Configuration</title> + + <para> + Differences include changes for + <link linkend='var-SSTATE_MIRRORS'><filename>SSTATE_MIRRORS</filename></link> + and <filename>bblayers.conf</filename>. + </para> + + <section id='migration-1.3-sstate-mirrors'> + <title>SSTATE_MIRRORS</title> + + <para> + The shared state cache (sstate-cache), as pointed to by + <link linkend='var-SSTATE_DIR'><filename>SSTATE_DIR</filename></link>, by default + now has two-character subdirectories to prevent issues arising + from too many files in the same directory. + Also, native sstate-cache packages will go into a subdirectory named using + the distro ID string. + If you copy the newly structured sstate-cache to a mirror location + (either local or remote) and then point to it in + <link linkend='var-SSTATE_MIRRORS'><filename>SSTATE_MIRRORS</filename></link>, + you need to append "PATH" to the end of the mirror URL so that + the path used by BitBake before the mirror substitution is + appended to the path used to access the mirror. + Here is an example: + <literallayout class='monospaced'> + SSTATE_MIRRORS = "file://.* http://<replaceable>someserver</replaceable>.tld/share/sstate/PATH" + </literallayout> + </para> + </section> + + <section id='migration-1.3-bblayers-conf'> + <title>bblayers.conf</title> + + <para> + The <filename>meta-yocto</filename> layer consists of two parts + that correspond to the Poky reference distribution and the + reference hardware Board Support Packages (BSPs), respectively: + <filename>meta-yocto</filename> and + <filename>meta-yocto-bsp</filename>. + When running BitBake or Hob for the first time after upgrading, + your <filename>conf/bblayers.conf</filename> file will be + updated to handle this change and you will be asked to + re-run or restart for the changes to take effect. + </para> + </section> + </section> + + <section id='1.3-recipes'> + <title>Recipes</title> + + <para> + Differences include changes for the following: + <itemizedlist> + <listitem><para>Python function whitespace</para></listitem> + <listitem><para><filename>proto=</filename> in <filename>SRC_URI</filename></para></listitem> + <listitem><para><filename>nativesdk</filename></para></listitem> + <listitem><para>Task recipes</para></listitem> + <listitem><para><filename>IMAGE_FEATURES</filename></para></listitem> + <listitem><para>Removed recipes</para></listitem> + </itemizedlist> + </para> + + <section id='migration-1.3-python-function-whitespace'> + <title>Python Function Whitespace</title> + + <para> + All Python functions must now use four spaces for indentation. + Previously, an inconsistent mix of spaces and tabs existed, + which made extending these functions using + <filename>_append</filename> or <filename>_prepend</filename> + complicated given that Python treats whitespace as + syntactically significant. + If you are defining or extending any Python functions (e.g. + <filename>populate_packages</filename>, <filename>do_unpack</filename>, + <filename>do_patch</filename> and so forth) in custom recipes + or classes, you need to ensure you are using consistent + four-space indentation. + </para> + </section> + + <section id='migration-1.3-proto=-in-src-uri'> + <title>proto= in SRC_URI</title> + + <para> + Any use of <filename>proto=</filename> in + <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link> + needs to be changed to <filename>protocol=</filename>. + In particular, this applies to the following URIs: + <itemizedlist> + <listitem><para><filename>svn://</filename></para></listitem> + <listitem><para><filename>bzr://</filename></para></listitem> + <listitem><para><filename>hg://</filename></para></listitem> + <listitem><para><filename>osc://</filename></para></listitem> + </itemizedlist> + Other URIs were already using <filename>protocol=</filename>. + This change improves consistency. + </para> + </section> + + <section id='migration-1.3-nativesdk'> + <title>nativesdk</title> + + <para> + The suffix <filename>nativesdk</filename> is now implemented + as a prefix, which simplifies a lot of the packaging code for + <filename>nativesdk</filename> recipes. + All custom <filename>nativesdk</filename> recipes and any + references need to be updated to use + <filename>nativesdk-*</filename> instead of + <filename>*-nativesdk</filename>. + </para> + </section> + + <section id='migration-1.3-task-recipes'> + <title>Task Recipes</title> + + <para> + "Task" recipes are now known as "Package groups" and have + been renamed from <filename>task-*.bb</filename> to + <filename>packagegroup-*.bb</filename>. + Existing references to the previous <filename>task-*</filename> + names should work in most cases as there is an automatic + upgrade path for most packages. + However, you should update references in your own recipes and + configurations as they could be removed in future releases. + You should also rename any custom <filename>task-*</filename> + recipes to <filename>packagegroup-*</filename>, and change + them to inherit <filename>packagegroup</filename> instead of + <filename>task</filename>, as well as taking the opportunity + to remove anything now handled by + <filename>packagegroup.bbclass</filename>, such as providing + <filename>-dev</filename> and <filename>-dbg</filename> + packages, setting + <link linkend='var-LIC_FILES_CHKSUM'><filename>LIC_FILES_CHKSUM</filename></link>, + and so forth. + See the + "<link linkend='ref-classes-packagegroup'><filename>packagegroup.bbclass</filename></link>" + section for further details. + </para> + </section> + + <section id='migration-1.3-image-features'> + <title>IMAGE_FEATURES</title> + + <para> + Image recipes that previously included "apps-console-core" + in <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link> + should now include "splash" instead to enable the boot-up + splash screen. + Retaining "apps-console-core" will still include the splash + screen but generates a warning. + The "apps-x11-core" and "apps-x11-games" + <filename>IMAGE_FEATURES</filename> features have been removed. + </para> + </section> + + <section id='migration-1.3-removed-recipes'> + <title>Removed Recipes</title> + + <para> + The following recipes have been removed. + For most of them, it is unlikely that you would have any + references to them in your own + <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>. + However, you should check your metadata against this list to be sure: + <itemizedlist> + <listitem><para><emphasis><filename>libx11-trim</filename></emphasis>: + Replaced by <filename>libx11</filename>, which has a negligible + size difference with modern Xorg.</para></listitem> + <listitem><para><emphasis><filename>xserver-xorg-lite</filename></emphasis>: + Use <filename>xserver-xorg</filename>, which has a negligible + size difference when DRI and GLX modules are not installed.</para></listitem> + <listitem><para><emphasis><filename>xserver-kdrive</filename></emphasis>: + Effectively unmaintained for many years.</para></listitem> + <listitem><para><emphasis><filename>mesa-xlib</filename></emphasis>: + No longer serves any purpose.</para></listitem> + <listitem><para><emphasis><filename>galago</filename></emphasis>: + Replaced by telepathy.</para></listitem> + <listitem><para><emphasis><filename>gail</filename></emphasis>: + Functionality was integrated into GTK+ 2.13.</para></listitem> + <listitem><para><emphasis><filename>eggdbus</filename></emphasis>: + No longer needed.</para></listitem> + <listitem><para><emphasis><filename>gcc-*-intermediate</filename></emphasis>: + The build has been restructured to avoid the need for + this step.</para></listitem> + <listitem><para><emphasis><filename>libgsmd</filename></emphasis>: + Unmaintained for many years. + Functionality now provided by + <filename>ofono</filename> instead.</para></listitem> + <listitem><para><emphasis>contacts, dates, tasks, eds-tools</emphasis>: + Largely unmaintained PIM application suite. + It has been moved to <filename>meta-gnome</filename> + in <filename>meta-openembedded</filename>.</para></listitem> + </itemizedlist> + In addition to the previously listed changes, the + <filename>meta-demoapps</filename> directory has also been removed + because the recipes in it were not being maintained and many + had become obsolete or broken. + Additionally, these recipes were not parsed in the default configuration. + Many of these recipes are already provided in an updated and + maintained form within the OpenEmbedded community layers such as + <filename>meta-oe</filename> and <filename>meta-gnome</filename>. + For the remainder, you can now find them in the + <filename>meta-extras</filename> repository, which is in the + Yocto Project + <ulink url='&YOCTO_DOCS_DEV_URL;#source-repositories'>Source Repositories</ulink>. + </para> + </section> + </section> + + <section id='1.3-linux-kernel-naming'> + <title>Linux Kernel Naming</title> + + <para> + The naming scheme for kernel output binaries has been changed to + now include + <link linkend='var-PE'><filename>PE</filename></link> as part of the + filename: + <literallayout class='monospaced'> + KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PE}-${PV}-${PR}-${MACHINE}-${DATETIME}" + </literallayout> + </para> + + <para> + Because the <filename>PE</filename> variable is not set by default, + these binary files could result with names that include two dash + characters. + Here is an example: + <literallayout class='monospaced'> + bzImage--3.10.9+git0+cd502a8814_7144bcc4b8-r0-qemux86-64-20130830085431.bin + </literallayout> + </para> + </section> +</section> + +<section id='moving-to-the-yocto-project-1.4-release'> + <title>Moving to the Yocto Project 1.4 Release</title> + + <para> + This section provides migration information for moving to the + Yocto Project 1.4 Release from the prior release. + </para> + + <section id='migration-1.4-bitbake'> + <title>BitBake</title> + + <para> + Differences include the following: + <itemizedlist> + <listitem><para><emphasis>Comment Continuation:</emphasis> + If a comment ends with a line continuation (\) character, + then the next line must also be a comment. + Any instance where this is not the case, now triggers + a warning. + You must either remove the continuation character, or be + sure the next line is a comment. + </para></listitem> + <listitem><para><emphasis>Package Name Overrides:</emphasis> + The runtime package specific variables + <link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link>, + <link linkend='var-RRECOMMENDS'><filename>RRECOMMENDS</filename></link>, + <link linkend='var-RSUGGESTS'><filename>RSUGGESTS</filename></link>, + <link linkend='var-RPROVIDES'><filename>RPROVIDES</filename></link>, + <link linkend='var-RCONFLICTS'><filename>RCONFLICTS</filename></link>, + <link linkend='var-RREPLACES'><filename>RREPLACES</filename></link>, + <link linkend='var-FILES'><filename>FILES</filename></link>, + <link linkend='var-ALLOW_EMPTY'><filename>ALLOW_EMPTY</filename></link>, + and the pre, post, install, and uninstall script functions + <filename>pkg_preinst</filename>, + <filename>pkg_postinst</filename>, + <filename>pkg_prerm</filename>, and + <filename>pkg_postrm</filename> should always have a + package name override. + For example, use <filename>RDEPENDS_${PN}</filename> for + the main package instead of <filename>RDEPENDS</filename>. + BitBake uses more strict checks when it parses recipes. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.4-build-behavior'> + <title>Build Behavior</title> + + <para> + Differences include the following: + <itemizedlist> + <listitem><para><emphasis>Shared State Code:</emphasis> + The shared state code has been optimized to avoid running + unnecessary tasks. + For example, the following no longer populates the target + sysroot since that is not necessary: + <literallayout class='monospaced'> + $ bitbake -c rootfs <replaceable>some-image</replaceable> + </literallayout> + Instead, the system just needs to extract the output + package contents, re-create the packages, and construct + the root filesystem. + This change is unlikely to cause any problems unless + you have missing declared dependencies. + </para></listitem> + <listitem><para><emphasis>Scanning Directory Names:</emphasis> + When scanning for files in + <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>, + the build system now uses + <link linkend='var-FILESOVERRIDES'><filename>FILESOVERRIDES</filename></link> + instead of <link linkend='var-OVERRIDES'><filename>OVERRIDES</filename></link> + for the directory names. + In general, the values previously in + <filename>OVERRIDES</filename> are now in + <filename>FILESOVERRIDES</filename> as well. + However, if you relied upon an additional value + you previously added to <filename>OVERRIDES</filename>, + you might now need to add it to + <filename>FILESOVERRIDES</filename> unless you are already + adding it through the + <link linkend='var-MACHINEOVERRIDES'><filename>MACHINEOVERRIDES</filename></link> + or <link linkend='var-DISTROOVERRIDES'><filename>DISTROOVERRIDES</filename></link> + variables, as appropriate. + For more related changes, see the + "<link linkend='migration-1.4-variables'>Variables</link>" + section. + </para></listitem> + </itemizedlist> + </para> + </section> + + + <section id='migration-1.4-proxies-and-fetching-source'> + <title>Proxies and Fetching Source</title> + + <para> + A new <filename>oe-git-proxy</filename> script has been added to + replace previous methods of handling proxies and fetching source + from Git. + See the <filename>meta-yocto/conf/site.conf.sample</filename> file + for information on how to use this script. + </para> + </section> + + <section id='migration-1.4-custom-interfaces-file-netbase-change'> + <title>Custom Interfaces File (netbase change)</title> + + <para> + If you have created your own custom + <filename>etc/network/interfaces</filename> file by creating + an append file for the <filename>netbase</filename> recipe, + you now need to create an append file for the + <filename>init-ifupdown</filename> recipe instead, which you can + find in the + <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink> + at <filename>meta/recipes-core/init-ifupdown</filename>. + For information on how to use append files, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#using-bbappend-files'>Using .bbappend Files</ulink>" + in the Yocto Project Development Manual. + </para> + </section> + + <section id='migration-1.4-remote-debugging'> + <title>Remote Debugging</title> + + <para> + Support for remote debugging with the Eclipse IDE is now + separated into an image feature + (<filename>eclipse-debug</filename>) that corresponds to the + <filename>packagegroup-core-eclipse-debug</filename> package group. + Previously, the debugging feature was included through the + <filename>tools-debug</filename> image feature, which corresponds + to the <filename>packagegroup-core-tools-debug</filename> + package group. + </para> + </section> + + <section id='migration-1.4-variables'> + <title>Variables</title> + + <para> + The following variables have changed: + <itemizedlist> + <listitem><para><emphasis><filename>SANITY_TESTED_DISTROS</filename>:</emphasis> + This variable now uses a distribution ID, which is composed + of the host distributor ID followed by the release. + Previously, + <link linkend='var-SANITY_TESTED_DISTROS'><filename>SANITY_TESTED_DISTROS</filename></link> + was composed of the description field. + For example, "Ubuntu 12.10" becomes "Ubuntu-12.10". + You do not need to worry about this change if you are not + specifically setting this variable, or if you are + specifically setting it to "". + </para></listitem> + <listitem><para><emphasis><filename>SRC_URI</filename>:</emphasis> + The <filename>${</filename><link linkend='var-PN'><filename>PN</filename></link><filename>}</filename>, + <filename>${</filename><link linkend='var-PF'><filename>PF</filename></link><filename>}</filename>, + <filename>${</filename><link linkend='var-P'><filename>P</filename></link><filename>}</filename>, + and <filename>FILE_DIRNAME</filename> directories have been + dropped from the default value of the + <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link> + variable, which is used as the search path for finding files + referred to in + <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>. + If you have a recipe that relied upon these directories, + which would be unusual, then you will need to add the + appropriate paths within the recipe or, alternatively, + rearrange the files. + The most common locations are still covered by + <filename>${BP}</filename>, <filename>${BPN}</filename>, + and "files", which all remain in the default value of + <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-target-package-management-with-rpm'> + <title>Target Package Management with RPM</title> + + <para> + If runtime package management is enabled and the RPM backend + is selected, Smart is now installed for package download, dependency + resolution, and upgrades instead of Zypper. + For more information on how to use Smart, run the following command + on the target: + <literallayout class='monospaced'> + smart --help + </literallayout> + </para> + </section> + + <section id='migration-1.4-recipes-moved'> + <title>Recipes Moved</title> + + <para> + The following recipes were moved from their previous locations + because they are no longer used by anything in + the OpenEmbedded-Core: + <itemizedlist> + <listitem><para><emphasis><filename>clutter-box2d</filename>:</emphasis> + Now resides in the <filename>meta-oe</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>evolution-data-server</filename>:</emphasis> + Now resides in the <filename>meta-gnome</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>gthumb</filename>:</emphasis> + Now resides in the <filename>meta-gnome</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>gtkhtml2</filename>:</emphasis> + Now resides in the <filename>meta-oe</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>gupnp</filename>:</emphasis> + Now resides in the <filename>meta-multimedia</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>gypsy</filename>:</emphasis> + Now resides in the <filename>meta-oe</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>libcanberra</filename>:</emphasis> + Now resides in the <filename>meta-gnome</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>libgdata</filename>:</emphasis> + Now resides in the <filename>meta-gnome</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>libmusicbrainz</filename>:</emphasis> + Now resides in the <filename>meta-multimedia</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>metacity</filename>:</emphasis> + Now resides in the <filename>meta-gnome</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>polkit</filename>:</emphasis> + Now resides in the <filename>meta-oe</filename> layer. + </para></listitem> + <listitem><para><emphasis><filename>zeroconf</filename>:</emphasis> + Now resides in the <filename>meta-networking</filename> layer. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.4-removals-and-renames'> + <title>Removals and Renames</title> + + <para> + The following list shows what has been removed or renamed: + <itemizedlist> + <listitem><para><emphasis><filename>evieext</filename>:</emphasis> + Removed because it has been removed from + <filename>xserver</filename> since 2008. + </para></listitem> + <listitem><para><emphasis>Gtk+ DirectFB:</emphasis> + Removed support because upstream Gtk+ no longer supports it + as of version 2.18. + </para></listitem> + <listitem><para><emphasis><filename>libxfontcache / xfontcacheproto</filename>:</emphasis> + Removed because they were removed from the Xorg server in 2008. + </para></listitem> + <listitem><para><emphasis><filename>libxp / libxprintapputil / libxprintutil / printproto</filename>:</emphasis> + Removed because the XPrint server was removed from + Xorg in 2008. + </para></listitem> + <listitem><para><emphasis><filename>libxtrap / xtrapproto</filename>:</emphasis> + Removed because their functionality was broken upstream. + </para></listitem> + <listitem><para><emphasis>linux-yocto 3.0 kernel:</emphasis> + Removed with linux-yocto 3.8 kernel being added. + The linux-yocto 3.2 and linux-yocto 3.4 kernels remain + as part of the release. + </para></listitem> + <listitem><para><emphasis><filename>lsbsetup</filename>:</emphasis> + Removed with functionality now provided by + <filename>lsbtest</filename>. + </para></listitem> + <listitem><para><emphasis><filename>matchbox-stroke</filename>:</emphasis> + Removed because it was never more than a proof-of-concept. + </para></listitem> + <listitem><para><emphasis><filename>matchbox-wm-2 / matchbox-theme-sato-2</filename>:</emphasis> + Removed because they are not maintained. + However, <filename>matchbox-wm</filename> and + <filename>matchbox-theme-sato</filename> are still + provided. + </para></listitem> + <listitem><para><emphasis><filename>mesa-dri</filename>:</emphasis> + Renamed to <filename>mesa</filename>. + </para></listitem> + <listitem><para><emphasis><filename>mesa-xlib</filename>:</emphasis> + Removed because it was no longer useful. + </para></listitem> + <listitem><para><emphasis><filename>mutter</filename>:</emphasis> + Removed because nothing ever uses it and the recipe is + very old. + </para></listitem> + <listitem><para><emphasis><filename>orinoco-conf</filename>:</emphasis> + Removed because it has become obsolete. + </para></listitem> + <listitem><para><emphasis><filename>update-modules</filename>:</emphasis> + Removed because it is no longer used. + The kernel module <filename>postinstall</filename> and + <filename>postrm</filename> scripts can now do the same + task without the use of this script. + </para></listitem> + <listitem><para><emphasis><filename>web</filename>:</emphasis> + Removed because it is not maintained. Superseded by + <filename>web-webkit</filename>. + </para></listitem> + <listitem><para><emphasis><filename>xf86bigfontproto</filename>:</emphasis> + Removed because upstream it has been disabled by default + since 2007. + Nothing uses <filename>xf86bigfontproto</filename>. + </para></listitem> + <listitem><para><emphasis><filename>xf86rushproto</filename>:</emphasis> + Removed because its dependency in + <filename>xserver</filename> was spurious and it was + removed in 2005. + </para></listitem> + <listitem><para><emphasis><filename>zypper / libzypp / sat-solver</filename>:</emphasis> + Removed and been functionally replaced with Smart + (<filename>python-smartpm</filename>) when RPM packaging + is used and package management is enabled on the target. + </para></listitem> + </itemizedlist> + </para> + </section> +</section> + +<section id='moving-to-the-yocto-project-1.5-release'> + <title>Moving to the Yocto Project 1.5 Release</title> + + <para> + This section provides migration information for moving to the + Yocto Project 1.5 Release from the prior release. + </para> + + <section id='migration-1.5-host-dependency-changes'> + <title>Host Dependency Changes</title> + + <para> + The OpenEmbedded build system now has some additional requirements + on the host system: + <itemizedlist> + <listitem><para>Python 2.7.3+</para></listitem> + <listitem><para>Tar 1.24+</para></listitem> + <listitem><para>Git 1.7.8+</para></listitem> + <listitem><para>Patched version of Make if you are using + 3.82. + Most distributions that provide Make 3.82 use the patched + version.</para></listitem> + </itemizedlist> + If the Linux distribution you are using on your build host + does not provide packages for these, you can install and use + the Buildtools tarball, which provides an SDK-like environment + containing them. + </para> + + <para> + For more information on this requirement, see the + "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>" + section. + </para> + </section> + + <section id='migration-1.5-atom-pc-bsp'> + <title><filename>atom-pc</filename> Board Support Package (BSP)</title> + + <para> + The <filename>atom-pc</filename> hardware reference BSP has been + replaced by a <filename>genericx86</filename> BSP. + This BSP is not necessarily guaranteed to work on all x86 + hardware, but it will run on a wider range of systems than the + <filename>atom-pc</filename> did. + <note> + Additionally, a <filename>genericx86-64</filename> BSP has + been added for 64-bit Atom systems. + </note> + </para> + </section> + + <section id='migration-1.5-bitbake'> + <title>BitBake</title> + + <para> + The following changes have been made that relate to BitBake: + <itemizedlist> + <listitem><para> + BitBake now supports a <filename>_remove</filename> + operator. + The addition of this operator means you will have to + rename any items in recipe space (functions, variables) + whose names currently contain + <filename>_remove_</filename> or end with + <filename>_remove</filename> to avoid unexpected behavior. + </para></listitem> + <listitem><para> + BitBake's global method pool has been removed. + This method is not particularly useful and led to clashes + between recipes containing functions that had the + same name.</para></listitem> + <listitem><para> + The "none" server backend has been removed. + The "process" server backend has been serving well as the + default for a long time now.</para></listitem> + <listitem><para> + The <filename>bitbake-runtask</filename> script has been + removed.</para></listitem> + <listitem><para> + <filename>${</filename><link linkend='var-P'><filename>P</filename></link><filename>}</filename> + and + <filename>${</filename><link linkend='var-PF'><filename>PF</filename></link><filename>}</filename> + are no longer added to + <link linkend='var-PROVIDES'><filename>PROVIDES</filename></link> + by default in <filename>bitbake.conf</filename>. + These version-specific <filename>PROVIDES</filename> + items were seldom used. + Attempting to use them could result in two versions being + built simultaneously rather than just one version due to + the way BitBake resolves dependencies.</para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.5-qa-warnings'> + <title>QA Warnings</title> + + <para> + The following changes have been made to the package QA checks: + <itemizedlist> + <listitem><para> + If you have customized + <link linkend='var-ERROR_QA'><filename>ERROR_QA</filename></link> + or <link linkend='var-WARN_QA'><filename>WARN_QA</filename></link> + values in your configuration, check that they contain all of + the issues that you wish to be reported. + Previous Yocto Project versions contained a bug that meant + that any item not mentioned in <filename>ERROR_QA</filename> + or <filename>WARN_QA</filename> would be treated as a + warning. + Consequently, several important items were not already in + the default value of <filename>WARN_QA</filename>. + All of the possible QA checks are now documented in the + "<link linkend='ref-classes-insane'><filename>insane.bbclass</filename></link>" + section.</para></listitem> + <listitem><para> + An additional QA check has been added to check if + <filename>/usr/share/info/dir</filename> is being installed. + Your recipe should delete this file within + <link linkend='ref-tasks-install'><filename>do_install</filename></link> + if "make install" is installing it. + </para></listitem> + <listitem><para> + If you are using the buildhistory class, the check for the + package version going backwards is now controlled using a + standard QA check. + Thus, if you have customized your + <filename>ERROR_QA</filename> or + <filename>WARN_QA</filename> values and still wish to have + this check performed, you should add + "version-going-backwards" to your value for one or the + other variables depending on how you wish it to be handled. + See the documented QA checks in the + "<link linkend='ref-classes-insane'><filename>insane.bbclass</filename></link>" + section. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.5-directory-layout-changes'> + <title>Directory Layout Changes</title> + + <para> + The following directory changes exist: + <itemizedlist> + <listitem><para> + Output SDK installer files are now named to include the + image name and tuning architecture through the + <link linkend='var-SDK_NAME'><filename>SDK_NAME</filename></link> + variable.</para></listitem> + <listitem><para> + Images and related files are now installed into a directory + that is specific to the machine, instead of a parent + directory containing output files for multiple machines. + The + <link linkend='var-DEPLOY_DIR_IMAGE'><filename>DEPLOY_DIR_IMAGE</filename></link> + variable continues to point to the directory containing + images for the current + <link linkend='var-MACHINE'><filename>MACHINE</filename></link> + and should be used anywhere there is a need to refer to + this directory. + The <filename>runqemu</filename> script now uses this + variable to find images and kernel binaries and will use + BitBake to determine the directory. + Alternatively, you can set the + <filename>DEPLOY_DIR_IMAGE</filename> variable in the + external environment.</para></listitem> + <listitem><para> + When buildhistory is enabled, its output is now written + under the + <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink> + rather than + <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>. + Doing so makes it easier to delete + <filename>TMPDIR</filename> and preserve the build history. + Additionally, data for produced SDKs is now split by + <link linkend='var-IMAGE_NAME'><filename>IMAGE_NAME</filename></link>. + </para></listitem> + <listitem><para> + The <filename>pkgdata</filename> directory produced as + part of the packaging process has been collapsed into a + single machine-specific directory. + This directory is located under + <filename>sysroots</filename> and uses a machine-specific + name (i.e. + <filename>tmp/sysroots/<replaceable>machine</replaceable>/pkgdata</filename>). + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.5-shortened-git-srcrev-values'> + <title>Shortened Git <filename>SRCREV</filename> Values</title> + + <para> + BitBake will now shorten revisions from Git repositories from the + normal 40 characters down to 10 characters within + <link linkend='var-SRCPV'><filename>SRCPV</filename></link> + for improved usability in path and file names. + This change should be safe within contexts where these revisions + are used because the chances of spatially close collisions + is very low. + Distant collisions are not a major issue in the way + the values are used. + </para> + </section> + + <section id='migration-1.5-image-features'> + <title><filename>IMAGE_FEATURES</filename></title> + + <para> + The following changes have been made that relate to + <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>: + <itemizedlist> + <listitem><para> + The value of + <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link> + is now validated to ensure invalid feature items are not + added. + Some users mistakenly add package names to this variable + instead of using + <link linkend='var-IMAGE_INSTALL'><filename>IMAGE_INSTALL</filename></link> + in order to have the package added to the image, which does + not work. + This change is intended to catch those kinds of situations. + Valid <filename>IMAGE_FEATURES</filename> are drawn from + <link linkend='var-PACKAGE_GROUP'><filename>PACKAGE_GROUP</filename></link> + definitions, + <link linkend='var-COMPLEMENTARY_GLOB'><filename>COMPLEMENTARY_GLOB</filename></link> + and a new "validitems" varflag on + <filename>IMAGE_FEATURES</filename>. + The "validitems" varflag change allows additional features + to be added if they are not provided using the previous + two mechanisms. + </para></listitem> + <listitem><para> + The previously deprecated "apps-console-core" + <filename>IMAGE_FEATURES</filename> item is no longer + supported. + Add "splash" to <filename>IMAGE_FEATURES</filename> if you + wish to have the splash screen enabled, since this is + all that apps-console-core was doing.</para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.5-run'> + <title><filename>/run</filename></title> + + <para> + The <filename>/run</filename> directory from the Filesystem + Hierarchy Standard 3.0 has been introduced. + You can find some of the implications for this change + <ulink url='http://cgit.openembedded.org/openembedded-core/commit/?id=0e326280a15b0f2c4ef2ef4ec441f63f55b75873'>here</ulink>. + The change also means that recipes that install files to + <filename>/var/run</filename> must be changed. + You can find a guide on how to make these changes + <ulink url='http://permalink.gmane.org/gmane.comp.handhelds.openembedded/58530'>here</ulink>. + </para> + </section> + + <section id='migration-1.5-removal-of-package-manager-database-within-image-recipes'> + <title>Removal of Package Manager Database Within Image Recipes</title> + + <para> + The image <filename>core-image-minimal</filename> no longer adds + <filename>remove_packaging_data_files</filename> to + <link linkend='var-ROOTFS_POSTPROCESS_COMMAND'><filename>ROOTFS_POSTPROCESS_COMMAND</filename></link>. + This addition is now handled automatically when "package-management" + is not in + <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>. + If you have custom image recipes that make this addition, + you should remove the lines, as they are not needed and might + interfere with correct operation of postinstall scripts. + </para> + </section> + + <section id='migration-1.5-images-now-rebuild-only-on-changes-instead-of-every-time'> + <title>Images Now Rebuild Only on Changes Instead of Every Time</title> + + <para> + The + <link linkend='ref-tasks-rootfs'><filename>do_rootfs</filename></link> + and other related image + construction tasks are no longer marked as "nostamp". + Consequently, they will only be re-executed when their inputs have + changed. + Previous versions of the OpenEmbedded build system always rebuilt + the image when requested rather when necessary. + </para> + </section> + + <section id='migration-1.5-task-recipes'> + <title>Task Recipes</title> + + <para> + The previously deprecated <filename>task.bbclass</filename> has + now been dropped. + For recipes that previously inherited from this class, you should + rename them from <filename>task-*</filename> to + <filename>packagegroup-*</filename> and inherit packagegroup + instead. + </para> + + <para> + For more information, see the + "<link linkend='ref-classes-packagegroup'><filename>packagegroup.bbclass</filename></link>" + section. + </para> + </section> + + <section id='migration-1.5-busybox'> + <title>BusyBox</title> + + <para> + By default, we now split BusyBox into two binaries: + one that is suid root for those components that need it, and + another for the rest of the components. + Splitting BusyBox allows for optimization that eliminates the + <filename>tinylogin</filename> recipe as recommended by upstream. + You can disable this split by setting + <link linkend='var-BUSYBOX_SPLIT_SUID'><filename>BUSYBOX_SPLIT_SUID</filename></link> + to "0". + </para> + </section> + + <section id='migration-1.5-automated-image-testing'> + <title>Automated Image Testing</title> + + <para> + A new automated image testing framework has been added + through the + <link linkend='ref-classes-testimage'><filename>testimage*.bbclass</filename></link> + class. + This framework replaces the older + <filename>imagetest-qemu</filename> framework. + </para> + + <para> + You can learn more about performing automated image tests in the + "<ulink url='&YOCTO_DOCS_DEV_URL;#performing-automated-runtime-testing'>Performing Automated Runtime Testing</ulink>" + section. + </para> + </section> + + <section id='migration-1.5-build-history'> + <title>Build History</title> + + <para> + Following are changes to Build History: + <itemizedlist> + <listitem><para> + Installed package sizes: + <filename>installed-package-sizes.txt</filename> for an + image now records the size of the files installed by each + package instead of the size of each compressed package + archive file.</para></listitem> + <listitem><para> + The dependency graphs (<filename>depends*.dot</filename>) + now use the actual package names instead of replacing + dashes, dots and plus signs with underscores. + </para></listitem> + <listitem><para> + The <filename>buildhistory-diff</filename> and + <filename>buildhistory-collect-srcrevs</filename> + utilities have improved command-line handling. + Use the <filename>--help</filename> option for + each utility for more information on the new syntax. + </para></listitem> + </itemizedlist> + For more information on Build History, see the + "<link linkend='maintaining-build-output-quality'>Maintaining Build Output Quality</link>" + section. + </para> + </section> + + <section id='migration-1.5-udev'> + <title><filename>udev</filename></title> + + <para> + Following are changes to <filename>udev</filename>: + <itemizedlist> + <listitem><para> + <filename>udev</filename> no longer brings in + <filename>udev-extraconf</filename> automatically + through + <link linkend='var-RRECOMMENDS'><filename>RRECOMMENDS</filename></link>, + since this was originally intended to be optional. + If you need the extra rules, then add + <filename>udev-extraconf</filename> to your image. + </para></listitem> + <listitem><para> + <filename>udev</filename> no longer brings in + <filename>pciutils-ids</filename> or + <filename>usbutils-ids</filename> through + <filename>RRECOMMENDS</filename>. + These are not needed by <filename>udev</filename> itself + and removing them saves around 350KB. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.5-removed-renamed-recipes'> + <title>Removed and Renamed Recipes</title> + + <itemizedlist> + <listitem><para> + The <filename>linux-yocto</filename> 3.2 kernel has been + removed.</para></listitem> + <listitem><para> + <filename>libtool-nativesdk</filename> has been renamed to + <filename>nativesdk-libtool</filename>.</para></listitem> + <listitem><para> + <filename>tinylogin</filename> has been removed. + It has been replaced by a suid portion of Busybox. + See the + "<link linkend='migration-1.5-busybox'>BusyBox</link>" section + for more information.</para></listitem> + <listitem><para> + <filename>external-python-tarball</filename> has been renamed + to <filename>buildtools-tarball</filename>. + </para></listitem> + <listitem><para> + <filename>web-webkit</filename> has been removed. + It has been functionally replaced by + <filename>midori</filename>.</para></listitem> + <listitem><para> + <filename>imake</filename> has been removed. + It is no longer needed by any other recipe. + </para></listitem> + <listitem><para> + <filename>transfig-native</filename> has been removed. + It is no longer needed by any other recipe. + </para></listitem> + <listitem><para> + <filename>anjuta-remote-run</filename> has been removed. + Anjuta IDE integration has not been officially supported for + several releases.</para></listitem> + </itemizedlist> + </section> + + <section id='migration-1.5-other-changes'> + <title>Other Changes</title> + + <para> + Following is a list of short entries describing other changes: + <itemizedlist> + <listitem><para> + <filename>run-postinsts</filename>: Make this generic. + </para></listitem> + <listitem><para> + <filename>base-files</filename>: Remove the unnecessary + <filename>media/</filename><replaceable>xxx</replaceable> directories. + </para></listitem> + <listitem><para> + <filename>alsa-state</filename>: Provide an empty + <filename>asound.conf</filename> by default. + </para></listitem> + <listitem><para> + <filename>classes/image</filename>: Ensure + <link linkend='var-BAD_RECOMMENDATIONS'><filename>BAD_RECOMMENDATIONS</filename></link> + supports pre-renamed package names.</para></listitem> + <listitem><para> + <filename>classes/rootfs_rpm</filename>: Implement + <link linkend='var-BAD_RECOMMENDATIONS'><filename>BAD_RECOMMENDATIONS</filename></link> + for RPM.</para></listitem> + <listitem><para> + <filename>systemd</filename>: Remove + <filename>systemd_unitdir</filename> if + <filename>systemd</filename> is not in + <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link>. + </para></listitem> + <listitem><para> + <filename>systemd</filename>: Remove + <filename>init.d</filename> dir if + <filename>systemd</filename> unit file is present and + <filename>sysvinit</filename> is not a distro feature. + </para></listitem> + <listitem><para> + <filename>libpam</filename>: Deny all services for the + <filename>OTHER</filename> entries. + </para></listitem> + <listitem><para> + <filename>image.bbclass</filename>: Move + <filename>runtime_mapping_rename</filename> to avoid + conflict with <filename>multilib</filename>. + See + <ulink url='https://bugzilla.yoctoproject.org/show_bug.cgi?id=4993'><filename>YOCTO #4993</filename></ulink> + in Bugzilla for more information. + </para></listitem> + <listitem><para> + <filename>linux-dtb</filename>: Use kernel build system + to generate the <filename>dtb</filename> files. + </para></listitem> + <listitem><para> + <filename>kern-tools</filename>: Switch from guilt to + new <filename>kgit-s2q</filename> tool. + </para></listitem> + </itemizedlist> + </para> + </section> +</section> + +<section id='moving-to-the-yocto-project-1.6-release'> + <title>Moving to the Yocto Project 1.6 Release</title> + + <para> + This section provides migration information for moving to the + Yocto Project 1.6 Release from the prior release. + </para> + + + <section id='migration-1.6-archiver-class'> + <title><filename>archiver</filename> Class</title> + + <para> + The + <link linkend='ref-classes-archiver'><filename>archiver</filename></link> + class has been rewritten and its configuration has been simplified. + For more details on the source archiver, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#maintaining-open-source-license-compliance-during-your-products-lifecycle'>Maintaining Open Source License Compliance During Your Product's Lifecycle</ulink>" + section in the Yocto Project Development Manual. + </para> + </section> + + <section id='migration-1.6-packaging-changes'> + <title>Packaging Changes</title> + + <para> + The following packaging changes have been made: + <itemizedlist> + <listitem><para> + The <filename>binutils</filename> recipe no longer produces + a <filename>binutils-symlinks</filename> package. + <filename>update-alternatives</filename> is now used to + handle the preferred <filename>binutils</filename> + variant on the target instead. + </para></listitem> + <listitem><para> + The tc (traffic control) utilities have been split out of + the main <filename>iproute2</filename> package and put + into the <filename>iproute2-tc</filename> package. + </para></listitem> + <listitem><para> + The <filename>gtk-engines</filename> schemas have been + moved to a dedicated + <filename>gtk-engines-schemas</filename> package. + </para></listitem> + <listitem><para> + The <filename>armv7a</filename> with thumb package + architecture suffix has changed. + The suffix for these packages with the thumb + optimization enabled is "t2" as it should be. + Use of this suffix was not the case in the 1.5 release. + Architecture names will change within package feeds as a + result. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.6-bitbake'> + <title>BitBake</title> + + <para> + The following changes have been made to + <ulink url='&YOCTO_DOCS_DEV_URL;#bitbake-term'>BitBake</ulink>. + </para> + + <section id='migration-1.6-matching-branch-requirement-for-git-fetching'> + <title>Matching Branch Requirement for Git Fetching</title> + + <para> + When fetching source from a Git repository using + <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>, + BitBake will now validate the + <link linkend='var-SRCREV'><filename>SRCREV</filename></link> + value against the branch. + You can specify the branch using the following form: + <literallayout class='monospaced'> + SRC_URI = "git://server.name/repository;branch=<replaceable>branchname</replaceable>" + </literallayout> + If you do not specify a branch, BitBake looks + in the default "master" branch. + </para> + + <para> + Alternatively, if you need to bypass this check (e.g. + if you are fetching a revision corresponding to a tag that + is not on any branch), you can add ";nobranch=1" to + the end of the URL within <filename>SRC_URI</filename>. + </para> + </section> + + <section id='migration-1.6-bitbake-deps'> + <title>Python Definition substitutions</title> + + <para> + BitBake had some previously deprecated Python definitions + within its <filename>bb</filename> module removed. + You should use their sub-module counterparts instead: + <itemizedlist> + <listitem><para><filename>bb.MalformedUrl</filename>: + Use <filename>bb.fetch.MalformedUrl</filename>. + </para></listitem> + <listitem><para><filename>bb.fetch.encodeurl</filename>: + Use <filename>bb.fetch.encodeurl</filename>. + </para></listitem> + <listitem><para><filename>bb.decodeurl</filename>: + Use <filename>bb.fetch.decodeurl</filename> + </para></listitem> + <listitem><para><filename>bb.mkdirhier</filename>: + Use <filename>bb.utils.mkdirhier</filename>. + </para></listitem> + <listitem><para><filename>bb.movefile</filename>: + Use <filename>bb.utils.movefile</filename>. + </para></listitem> + <listitem><para><filename>bb.copyfile</filename>: + Use <filename>bb.utils.copyfile</filename>. + </para></listitem> + <listitem><para><filename>bb.which</filename>: + Use <filename>bb.utils.which</filename>. + </para></listitem> + <listitem><para><filename>bb.vercmp_string</filename>: + Use <filename>bb.utils.vercmp_string</filename>. + </para></listitem> + <listitem><para><filename>bb.vercmp</filename>: + Use <filename>bb.utils.vercmp</filename>. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.6-bitbake-fetcher'> + <title>SVK Fetcher</title> + + <para> + The SVK fetcher has been removed from BitBake. + </para> + </section> + + <section id='migration-1.6-bitbake-console-output'> + <title>Console Output Error Redirection</title> + + <para> + The BitBake console UI will now output errors to + <filename>stderr</filename> instead of + <filename>stdout</filename>. + Consequently, if you are piping or redirecting the output of + <filename>bitbake</filename> to somewhere else, and you wish + to retain the errors, you will need to add + <filename>2>&1</filename> (or something similar) to the + end of your <filename>bitbake</filename> command line. + </para> + </section> + + <section id='migration-1.6-task-taskname-overrides'> + <title><filename>task-</filename><replaceable>taskname</replaceable> Overrides</title> + + <para> + <filename>task-</filename><replaceable>taskname</replaceable> overrides have been + adjusted so that tasks whose names contain underscores have the + underscores replaced by hyphens for the override so that they + now function properly. + For example, the task override for + <link linkend='ref-tasks-populate_sdk'><filename>do_populate_sdk</filename></link> + is <filename>task-populate-sdk</filename>. + </para> + </section> + </section> + + <section id='migration-1.6-variable-changes'> + <title>Changes to Variables</title> + + <para> + The following variables have changed. + For information on the OpenEmbedded build system variables, see the + "<link linkend='ref-variables-glos'>Variables Glossary</link>" Chapter. + </para> + + <section id='migration-1.6-variable-changes-TMPDIR'> + <title><filename>TMPDIR</filename></title> + + <para> + <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link> + can no longer be on an NFS mount. + NFS does not offer full POSIX locking and inode consistency + and can cause unexpected issues if used to store + <filename>TMPDIR</filename>. + </para> + + <para> + The check for this occurs on startup. + If <filename>TMPDIR</filename> is detected on an NFS mount, + an error occurs. + </para> + </section> + + <section id='migration-1.6-variable-changes-PRINC'> + <title><filename>PRINC</filename></title> + + <para> + The <filename>PRINC</filename> + variable has been deprecated and triggers a warning if + detected during a build. + For + <link linkend='var-PR'><filename>PR</filename></link> + increments on changes, use the PR service instead. + You can find out more about this service in the + "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-a-pr-service'>Working With a PR Service</ulink>" + section in the Yocto Project Development Manual. + </para> + </section> + + <section id='migration-1.6-variable-changes-IMAGE_TYPES'> + <title><filename>IMAGE_TYPES</filename></title> + + <para> + The "sum.jffs2" option for + <link linkend='var-IMAGE_TYPES'><filename>IMAGE_TYPES</filename></link> + has been replaced by the "jffs2.sum" option, which fits the + processing order. + </para> + </section> + + <section id='migration-1.6-variable-changes-COPY_LIC_MANIFEST'> + <title><filename>COPY_LIC_MANIFEST</filename></title> + + <para> + The + <link linkend='var-COPY_LIC_MANIFEST'><filename>COPY_LIC_MANIFEST</filename></link> + variable must + now be set to "1" rather than any value in order to enable + it. + </para> + </section> + + <section id='migration-1.6-variable-changes-COPY_LIC_DIRS'> + <title><filename>COPY_LIC_DIRS</filename></title> + + <para> + The + <link linkend='var-COPY_LIC_DIRS'><filename>COPY_LIC_DIRS</filename></link> + variable must + now be set to "1" rather than any value in order to enable + it. + </para> + </section> + + <section id='migration-1.6-variable-changes-PACKAGE_GROUP'> + <title><filename>PACKAGE_GROUP</filename></title> + + <para> + The + <link linkend='var-PACKAGE_GROUP'><filename>PACKAGE_GROUP</filename></link> + variable has been renamed to + <link linkend='var-FEATURE_PACKAGES'><filename>FEATURE_PACKAGES</filename></link> + to more accurately reflect its purpose. + You can still use <filename>PACKAGE_GROUP</filename> but + the OpenEmbedded build system produces a warning message when + it encounters the variable. + </para> + </section> + + <section id='migration-1.6-variable-changes-variable-entry-behavior'> + <title>Preprocess and Post Process Command Variable Behavior</title> + + <para> + The following variables now expect a semicolon separated + list of functions to call and not arbitrary shell commands: + <literallayout class='monospaced'> + <link linkend='var-ROOTFS_PREPROCESS_COMMAND'>ROOTFS_PREPROCESS_COMMAND</link> + <link linkend='var-ROOTFS_POSTPROCESS_COMMAND'>ROOTFS_POSTPROCESS_COMMAND</link> + <link linkend='var-SDK_POSTPROCESS_COMMAND'>SDK_POSTPROCESS_COMMAND</link> + <link linkend='var-POPULATE_SDK_POST_TARGET_COMMAND'>POPULATE_SDK_POST_TARGET_COMMAND</link> + <link linkend='var-POPULATE_SDK_POST_HOST_COMMAND'>POPULATE_SDK_POST_HOST_COMMAND</link> + <link linkend='var-IMAGE_POSTPROCESS_COMMAND'>IMAGE_POSTPROCESS_COMMAND</link> + <link linkend='var-IMAGE_PREPROCESS_COMMAND'>IMAGE_PREPROCESS_COMMAND</link> + <link linkend='var-ROOTFS_POSTUNINSTALL_COMMAND'>ROOTFS_POSTUNINSTALL_COMMAND</link> + <link linkend='var-ROOTFS_POSTINSTALL_COMMAND'>ROOTFS_POSTINSTALL_COMMAND</link> + </literallayout> + For migration purposes, you can simply wrap shell commands in + a shell function and then call the function. + Here is an example: + <literallayout class='monospaced'> + my_postprocess_function() { + echo "hello" > ${IMAGE_ROOTFS}/hello.txt + } + ROOTFS_POSTPROCESS_COMMAND += "my_postprocess_function; " + </literallayout> + </para> + </section> + </section> + + <section id='migration-1.6-directory-layout-changes'> + <title>Directory Layout Changes</title> + + <para> + The <filename>meta-hob</filename> layer has been removed from + the top-level of the + <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>. + The contents of this layer are no longer needed by the Hob + user interface for building images and toolchains. + </para> + </section> + + <section id='migration-1.6-package-test-ptest'> + <title>Package Test (ptest)</title> + + <para> + Package Tests (ptest) are built but not installed by default. + For information on using Package Tests, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#testing-packages-with-ptest'>Setting up and running package test (ptest)</ulink>" + section in the Yocto Project Development Manual. + For information on the <filename>ptest</filename> class, see the + "<link linkend='ref-classes-ptest'><filename>ptest.bbclass</filename></link>" + section. + </para> + </section> + + <section id='migration-1.6-build-changes'> + <title>Build Changes</title> + + <para> + Separate build and source directories have been enabled + by default for selected recipes where it is known to work + (a whitelist) and for all recipes that inherit the + <link linkend='ref-classes-cmake'><filename>cmake</filename></link> + class. + In future releases the + <link linkend='ref-classes-autotools'><filename>autotools</filename></link> + class will enable a separate build directory by default as + well. + Recipes building Autotools-based + software that fails to build with a separate build directory + should be changed to inherit from the + <link linkend='ref-classes-autotools-brokensep'><filename>autotools-brokensep</filename></link> + class instead of the <filename>autotools</filename> class. + </para> + </section> + + <section id='migration-1.6-building-qemu-native'> + <title><filename>qemu-native</filename></title> + + <para> + <filename>qemu-native</filename> now builds without + SDL-based graphical output support by default. + The following additional lines are needed in your + <filename>local.conf</filename> to enable it: + <literallayout class='monospaced'> + PACKAGECONFIG_pn-qemu-native = "sdl" + ASSUME_PROVIDED += "libsdl-native" + </literallayout> + <note> + The default <filename>local.conf</filename> + contains these statements. + Consequently, if you are building a headless system and using + a default <filename>local.conf</filename> file, you will need + comment these two lines out. + </note> + </para> + </section> + + <section id='migration-1.6-core-image-basic'> + <title><filename>core-image-basic</filename></title> + + <para> + <filename>core-image-basic</filename> has been renamed to + <filename>core-image-full-cmdline</filename>. + </para> + + <para> + In addition to <filename>core-image-basic</filename> being renamed, + <filename>packagegroup-core-basic</filename> has been renamed to + <filename>packagegroup-core-full-cmdline</filename> to match. + </para> + </section> + + <section id='migration-1.6-licensing'> + <title>Licensing</title> + + <para> + The top-level <filename>LICENSE</filename> file has been changed + to better describe the license of the various components of + OE-Core. + However, the licensing itself remains unchanged. + </para> + + <para> + Normally, this change would not cause any side-effects. + However, some recipes point to this file within + <link linkend='var-LIC_FILES_CHKSUM'><filename>LIC_FILES_CHKSUM</filename></link> + (as <filename>${COREBASE}/LICENSE</filename>) and thus the + accompanying checksum must be changed from + 3f40d7994397109285ec7b81fdeb3b58 to + 4d92cd373abda3937c2bc47fbc49d690. + A better alternative is to have + <filename>LIC_FILES_CHKSUM</filename> point to a file + describing the license that is distributed with the source + that the recipe is building, if possible, rather than pointing + to <filename>${COREBASE}/LICENSE</filename>. + </para> + </section> + + <section id='migration-1.6-cflags-options'> + <title><filename>CFLAGS</filename> Options</title> + + <para> + The "-fpermissive" option has been removed from the default + <link linkend='var-CFLAGS'><filename>CFLAGS</filename></link> + value. + You need to take action on individual recipes that fail when + building with this option. + You need to either patch the recipes to fix the issues reported by + the compiler, or you need to add "-fpermissive" to + <filename>CFLAGS</filename> in the recipes. + </para> + </section> + + <section id='migration-1.6-custom-images'> + <title>Custom Image Output Types</title> + + <para> + Custom image output types, as selected using + <link linkend='var-IMAGE_FSTYPES'><filename>IMAGE_FSTYPES</filename></link>, + must declare their dependencies on other image types (if any) using + a new + <link linkend='var-IMAGE_TYPEDEP'><filename>IMAGE_TYPEDEP</filename></link> + variable. + </para> + </section> + + <section id='migration-1.6-do-package-write-task'> + <title>Tasks</title> + + <para> + The <filename>do_package_write</filename> task has been removed. + The task is no longer needed. + </para> + </section> + + <section id='migration-1.6-update-alternatives-provider'> + <title><filename>update-alternative</filename> Provider</title> + + <para> + The default <filename>update-alternatives</filename> provider has + been changed from <filename>opkg</filename> to + <filename>opkg-utils</filename>. + This change resolves some troublesome circular dependencies. + The runtime package has also been renamed from + <filename>update-alternatives-cworth</filename> + to <filename>update-alternatives-opkg</filename>. + </para> + </section> + + <section id='migration-1.6-virtclass-overrides'> + <title><filename>virtclass</filename> Overrides</title> + + <para> + The <filename>virtclass</filename> overrides are now deprecated. + Use the equivalent class overrides instead (e.g. + <filename>virtclass-native</filename> becomes + <filename>class-native</filename>.) + </para> + </section> + + <section id='migration-1.6-removed-renamed-recipes'> + <title>Removed and Renamed Recipes</title> + + <para> + The following recipes have been removed: + <itemizedlist> + <listitem><para><filename>packagegroup-toolset-native</filename> - + This recipe is largely unused. + </para></listitem> + <listitem><para><filename>linux-yocto-3.8</filename> - + Support for the Linux yocto 3.8 kernel has been dropped. + Support for the 3.10 and 3.14 kernels have been added + with the <filename>linux-yocto-3.10</filename> and + <filename>linux-yocto-3.14</filename> recipes. + </para></listitem> + <listitem><para><filename>ocf-linux</filename> - + This recipe has been functionally replaced using + <filename>cryptodev-linux</filename>. + </para></listitem> + <listitem><para><filename>genext2fs</filename> - + <filename>genext2fs</filename> is no longer used by the + build system and is unmaintained upstream. + </para></listitem> + <listitem><para><filename>js</filename> - + This provided an ancient version of Mozilla's javascript + engine that is no longer needed. + </para></listitem> + <listitem><para><filename>zaurusd</filename> - + The recipe has been moved to the + <filename>meta-handheld</filename> layer. + </para></listitem> + <listitem><para><filename>eglibc 2.17</filename> - + Replaced by the <filename>eglibc 2.19</filename> + recipe. + </para></listitem> + <listitem><para><filename>gcc 4.7.2</filename> - + Replaced by the now stable + <filename>gcc 4.8.2</filename>. + </para></listitem> + <listitem><para><filename>external-sourcery-toolchain</filename> - + this recipe is now maintained in the + <filename>meta-sourcery</filename> layer. + </para></listitem> + <listitem><para><filename>linux-libc-headers-yocto 3.4+git</filename> - + Now using version 3.10 of the + <filename>linux-libc-headers</filename> by default. + </para></listitem> + <listitem><para><filename>meta-toolchain-gmae</filename> - + This recipe is obsolete. + </para></listitem> + <listitem><para><filename>packagegroup-core-sdk-gmae</filename> - + This recipe is obsolete. + </para></listitem> + <listitem><para><filename>packagegroup-core-standalone-gmae-sdk-target</filename> - + This recipe is obsolete. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.6-removed-classes'> + <title>Removed Classes</title> + + <para> + The following classes have become obsolete and have been removed: + <itemizedlist> + <listitem><para><filename>module_strip</filename> + </para></listitem> + <listitem><para><filename>pkg_metainfo</filename> + </para></listitem> + <listitem><para><filename>pkg_distribute</filename> + </para></listitem> + <listitem><para><filename>image-empty</filename> + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.6-reference-bsps'> + <title>Reference Board Support Packages (BSPs)</title> + + <para> + The following reference BSPs changes occurred: + <itemizedlist> + <listitem><para>The BeagleBoard + (<filename>beagleboard</filename>) ARM reference hardware + has been replaced by the BeagleBone + (<filename>beaglebone</filename>) hardware. + </para></listitem> + <listitem><para>The RouterStation Pro + (<filename>routerstationpro</filename>) MIPS reference + hardware has been replaced by the EdgeRouter Lite + (<filename>edgerouter</filename>) hardware. + </para></listitem> + </itemizedlist> + The previous reference BSPs for the + <filename>beagleboard</filename> and + <filename>routerstationpro</filename> machines are still available + in a new <filename>meta-yocto-bsp-old</filename> layer in the + <ulink url='&YOCTO_GIT_URL;'>Source Repositories</ulink> + at + <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto-bsp-old/'>http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto-bsp-old/</ulink>. + </para> + </section> +</section> + +<section id='moving-to-the-yocto-project-1.7-release'> + <title>Moving to the Yocto Project 1.7 Release</title> + + <para> + This section provides migration information for moving to the + Yocto Project 1.7 Release from the prior release. + </para> + + <section id='migration-1.7-changes-to-setting-qemu-packageconfig-options'> + <title>Changes to Setting QEMU <filename>PACKAGECONFIG</filename> Options in <filename>local.conf</filename></title> + + <para> + The QEMU recipe now uses a number of + <link linkend='var-PACKAGECONFIG'><filename>PACKAGECONFIG</filename></link> + options to enable various optional features. + The method used to set defaults for these options means that + existing + <filename>local.conf</filename> files will need to be be + modified to append to <filename>PACKAGECONFIG</filename> for + <filename>qemu-native</filename> and + <filename>nativesdk-qemu</filename> instead of setting it. + In other words, to enable graphical output for QEMU, you should + now have these lines in <filename>local.conf</filename>: + <literallayout class='monospaced'> + PACKAGECONFIG_append_pn-qemu-native = " sdl" + PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" + </literallayout> + </para> + </section> + + <section id='migration-1.7-minimum-git-version'> + <title>Minimum Git version</title> + + <para> + The minimum + <ulink url='&YOCTO_DOCS_DEV_URL;#git'>Git</ulink> version required + on the build host is now 1.7.8 because the + <filename>--list</filename> option is now required by + BitBake's Git fetcher. + As always, if your host distribution does not provide a version of + Git that meets this requirement, you can use the + <filename>buildtools-tarball</filename> that does. + See the + "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>" + section for more information. + </para> + </section> + + <section id='migration-1.7-autotools-class-changes'> + <title>Autotools Class Changes</title> + + <para> + The following + <link linkend='ref-classes-autotools'><filename>autotools</filename></link> + class changes occurred: + <itemizedlist> + <listitem><para><emphasis> + A separate build directory is now used by default:</emphasis> + The <filename>autotools</filename> class has been changed + to use a directory for building + (<link linkend='var-B'><filename>B</filename></link>), + which is separate from the source directory + (<link linkend='var-S'><filename>S</filename></link>). + This is commonly referred to as + <filename>B != S</filename>, or an out-of-tree build.</para> + <para>If the software being built is already capable of + building in a directory separate from the source, you + do not need to do anything. + However, if the software is not capable of being built + in this manner, you will + need to either patch the software so that it can build + separately, or you will need to change the recipe to + inherit the + <link linkend='ref-classes-autotools-brokensep'><filename>autotools-brokensep</filename></link> + class instead of the <filename>autotools</filename> class. + </para></listitem> + <listitem><para><emphasis> + The <filename>--foreign</filename> option is + no longer passed to <filename>automake</filename> when + running <filename>autoconf</filename>:</emphasis> + This option tells <filename>automake</filename> that a + particular software package does not follow the GNU + standards and therefore should not be expected + to distribute certain files such as + <filename>ChangeLog</filename>, + <filename>AUTHORS</filename>, and so forth. + Because the majority of upstream software packages already + tell <filename>automake</filename> to enable foreign mode + themselves, the option is mostly superfluous. + However, some recipes will need patches for this change. + You can easily make the change by patching + <filename>configure.ac</filename> so that it passes + "foreign" to <filename>AM_INIT_AUTOMAKE()</filename>. + See + <ulink url='http://cgit.openembedded.org/openembedded-core/commit/?id=01943188f85ce6411717fb5bf702d609f55813f2'>this commit</ulink> + for an example showing how to make the patch. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.7-binary-configuration-scripts-disabled'> + <title>Binary Configuration Scripts Disabled</title> + + <para> + Some of the core recipes that package binary configuration scripts + now disable the scripts due to the + scripts previously requiring error-prone path substitution. + Software that links against these libraries using these scripts + should use the much more robust <filename>pkg-config</filename> + instead. + The list of recipes changed in this version (and their + configuration scripts) is as follows: + <literallayout class='monospaced'> + directfb (directfb-config) + freetype (freetype-config) + gpgme (gpgme-config) + libassuan (libassuan-config) + libcroco (croco-6.0-config) + libgcrypt (libgcrypt-config) + libgpg-error (gpg-error-config) + libksba (ksba-config) + libpcap (pcap-config) + libpcre (pcre-config) + libpng (libpng-config, libpng16-config) + libsdl (sdl-config) + libusb-compat (libusb-config) + libxml2 (xml2-config) + libxslt (xslt-config) + ncurses (ncurses-config) + neon (neon-config) + npth (npth-config) + pth (pth-config) + taglib (taglib-config) + </literallayout> + Additionally, support for <filename>pkg-config</filename> has been + added to some recipes in the previous list in the rare cases + where the upstream software package does not already provide + it. + </para> + </section> + + <section id='migration-1.7-glibc-replaces-eglibc'> + <title><filename>eglibc 2.19</filename> Replaced with <filename>glibc 2.20</filename></title> + + <para> + Because <filename>eglibc</filename> and + <filename>glibc</filename> were already fairly close, this + replacement should not require any significant changes to other + software that links to <filename>eglibc</filename>. + However, there were a number of minor changes in + <filename>glibc 2.20</filename> upstream that could require + patching some software (e.g. the removal of the + <filename>_BSD_SOURCE</filename> feature test macro). + </para> + + <para> + <filename>glibc 2.20</filename> requires version 2.6.32 or greater + of the Linux kernel. + Thus, older kernels will no longer be usable in conjunction with it. + </para> + + <para> + For full details on the changes in <filename>glibc 2.20</filename>, + see the upstream release notes + <ulink url='https://sourceware.org/ml/libc-alpha/2014-09/msg00088.html'>here</ulink>. + </para> + </section> + + <section id='migration-1.7-kernel-module-autoloading'> + <title>Kernel Module Autoloading</title> + + <para> + The + <link linkend='var-module_autoload'><filename>module_autoload_*</filename></link> + variable is now deprecated and a new + <link linkend='var-KERNEL_MODULE_AUTOLOAD'><filename>KERNEL_MODULE_AUTOLOAD</filename></link> + variable should be used instead. + Also, + <link linkend='var-module_conf'><filename>module_conf_*</filename></link> + must now be used in conjunction with a new + <link linkend='var-KERNEL_MODULE_PROBECONF'><filename>KERNEL_MODULE_PROBECONF</filename></link> + variable. + The new variables no longer require you to specify the module name + as part of the variable name. + This change not only simplifies usage but also allows the values + of these variables to be appropriately incorporated into task + signatures and thus trigger the appropriate tasks to re-execute + when changed. + You should replace any references to + <filename>module_autoload_*</filename> with + <filename>KERNEL_MODULE_AUTOLOAD</filename>, and add any modules + for which <filename>module_conf_*</filename> is specified to + <filename>KERNEL_MODULE_PROBECONF</filename>. + </para> + + <para> + For more information, see the + <link linkend='var-KERNEL_MODULE_AUTOLOAD'><filename>KERNEL_MODULE_AUTOLOAD</filename></link> + and + <link linkend='var-KERNEL_MODULE_PROBECONF'><filename>KERNEL_MODULE_PROBECONF</filename></link> + variables. + </para> + </section> + + <section id='migration-1.7-qa-check-changes'> + <title>QA Check Changes</title> + + <para> + The following changes have occurred to the QA check process: + <itemizedlist> + <listitem><para> + Additional QA checks <filename>file-rdeps</filename> + and <filename>build-deps</filename> have been added in + order to verify that file dependencies are satisfied + (e.g. package contains a script requiring + <filename>/bin/bash</filename>) and build-time dependencies + are declared, respectively. + For more information, please see the + "<link linkend='ref-qa-checks'>QA Error and Warning Messages</link>" + chapter. + </para></listitem> + <listitem><para> + Package QA checks are now performed during a new + <link linkend='ref-tasks-package_qa'><filename>do_package_qa</filename></link> + task rather than being part of the + <link linkend='ref-tasks-package'><filename>do_package</filename></link> + task. + This allows more parallel execution. + This change is unlikely to be an issue except for highly + customized recipes that disable packaging tasks themselves + by marking them as <filename>noexec</filename>. + For those packages, you will need to disable the + <filename>do_package_qa</filename> task as well. + </para></listitem> + <listitem><para> + Files being overwritten during the + <link linkend='ref-tasks-populate_sysroot'><filename>do_populate_sysroot</filename></link> + task now trigger an error instead of a warning. + Recipes should not be overwriting files written to the + sysroot by other recipes. + If you have these types of recipes, you need to alter them + so that they do not overwrite these files.</para> + <para>You might now receive this error after changes in + configuration or metadata resulting in orphaned files + being left in the sysroot. + If you do receive this error, the way to resolve the issue + is to delete your + <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link> + or to move it out of the way and then re-start the build. + Anything that has been fully built up to that point and + does not need rebuilding will be restored from the shared + state cache and the rest of the build will be able to + proceed as normal. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.7-removed-recipes'> + <title>Removed Recipes</title> + + <para> + The following recipes have been removed: + <itemizedlist> + <listitem><para> + <filename>x-load</filename>: + This recipe has been superseded by + U-boot SPL for all Cortex-based TI SoCs. + For legacy boards, the <filename>meta-ti</filename> + layer, which contains a maintained recipe, should be used + instead. + </para></listitem> + <listitem><para> + <filename>ubootchart</filename>: + This recipe is obsolete. + A <filename>bootchart2</filename> recipe has been added + to functionally replace it. + </para></listitem> + <listitem><para> + <filename>linux-yocto 3.4</filename>: + Support for the linux-yocto 3.4 kernel has been dropped. + Support for the 3.10 and 3.14 kernels remains, while + support for version 3.17 has been added. + </para></listitem> + <listitem><para> + <filename>eglibc</filename> has been removed in favor of + <filename>glibc</filename>. + See the + "<link linkend='migration-1.7-glibc-replaces-eglibc'><filename>eglibc 2.19</filename> Replaced with <filename>glibc 2.20</filename></link>" + section for more information. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.7-miscellaneous-changes'> + <title>Miscellaneous Changes</title> + + <para> + The following miscellaneous change occurred: + <itemizedlist> + <listitem><para> + The build history feature now writes + <filename>build-id.txt</filename> instead of + <filename>build-id</filename>. + Additionally, <filename>build-id.txt</filename> + now contains the full build header as printed by + BitBake upon starting the build. + You should manually remove old "build-id" files from your + existing build history repositories to avoid confusion. + For information on the build history feature, see the + "<link linkend='maintaining-build-output-quality'>Maintaining Build Output Quality</link>" + section. + </para></listitem> + </itemizedlist> + </para> + </section> +</section> + +<section id='moving-to-the-yocto-project-1.8-release'> + <title>Moving to the Yocto Project 1.8 Release</title> + + <para> + This section provides migration information for moving to the + Yocto Project 1.8 Release from the prior release. + </para> + + <section id='migration-1.8-removed-recipes'> + <title>Removed Recipes</title> + + <para> + The following recipes have been removed: + <itemizedlist> + <listitem><para><filename>owl-video</filename>: + Functionality replaced by <filename>gst-player</filename>. + </para></listitem> + <listitem><para><filename>gaku</filename>: + Functionality replaced by <filename>gst-player</filename>. + </para></listitem> + <listitem><para><filename>gnome-desktop</filename>: + This recipe is now available in + <filename>meta-gnome</filename> and is no longer needed. + </para></listitem> + <listitem><para><filename>gsettings-desktop-schemas</filename>: + This recipe is now available in + <filename>meta-gnome</filename> and is no longer needed. + </para></listitem> + <listitem><para><filename>python-argparse</filename>: + The <filename>argparse</filename> module is already + provided in the default Python distribution in a + package named <filename>python-argparse</filename>. + Consequently, the separate + <filename>python-argparse</filename> recipe is no + longer needed. + </para></listitem> + <listitem><para><filename>telepathy-python, libtelepathy, telepathy-glib, telepathy-idle, telepathy-mission-control</filename>: + All these recipes have moved to + <filename>meta-oe</filename> and are consequently no + longer needed by any recipes in OpenEmbedded-Core. + </para></listitem> + <listitem><para><filename>linux-yocto_3.10</filename> and <filename>linux-yocto_3.17</filename>: + Support for the linux-yocto 3.10 and 3.17 kernels has been + dropped. + Support for the 3.14 kernel remains, while support for + 3.19 kernel has been added. + </para></listitem> + <listitem><para><filename>poky-feed-config-opkg</filename>: + This recipe has become obsolete and is no longer needed. + Use <filename>distro-feed-config</filename> from + <filename>meta-oe</filename> instead. + </para></listitem> + <listitem><para><filename>libav 0.8.x</filename>: + <filename>libav 9.x</filename> is now used. + </para></listitem> + <listitem><para><filename>sed-native</filename>: + No longer needed. + A working version of <filename>sed</filename> is expected + to be provided by the host distribution. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.8-bluez'> + <title>BlueZ 4.x / 5.x Selection</title> + + <para> + Proper built-in support for selecting BlueZ 5.x in preference + to the default of 4.x now exists. + To use BlueZ 5.x, simply add "bluez5" to your + <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link> + value. + If you had previously added append files + (<filename>*.bbappend</filename>) to make this selection, you can + now remove them. + </para> + + <para> + Additionally, a + <link linkend='ref-classes-bluetooth'><filename>bluetooth</filename></link> + class has been added to make selection of the appropriate bluetooth + support within a recipe a little easier. + If you wish to make use of this class in a recipe, add something + such as the following: + <literallayout class='monospaced'> + inherit bluetooth + PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', '${BLUEZ}', '', d)} + PACKAGECONFIG[bluez4] = "--enable-bluetooth,--disable-bluetooth,bluez4" + PACKAGECONFIG[bluez5] = "--enable-bluez5,--disable-bluez5,bluez5" + </literallayout> + </para> + </section> + + <section id='migration-1.8-kernel-build-changes'> + <title>Kernel Build Changes</title> + + <para> + The kernel build process was changed to place the source + in a common shared work area and to place build artifacts + separately in the source code tree. + In theory, migration paths have been provided for most common + usages in kernel recipes but this might not work in all cases. + In particular, users need to ensure that + <filename>${S}</filename> (source files) and + <filename>${B}</filename> (build artifacts) are used + correctly in functions such as + <link linkend='ref-tasks-configure'><filename>do_configure</filename></link> + and + <link linkend='ref-tasks-install'><filename>do_install</filename></link>. + For kernel recipes that do not inherit from + <filename>kernel-yocto</filename> or include + <filename>linux-yocto.inc</filename>, you might wish to + refer to the <filename>linux.inc</filename> file in the + <filename>meta-oe</filename> layer for the kinds of changes you + need to make. + For reference, here is the + <ulink url='http://cgit.openembedded.org/meta-openembedded/commit/meta-oe/recipes-kernel/linux/linux.inc?id=fc7132ede27ac67669448d3d2845ce7d46c6a1ee'>commit</ulink> + where the <filename>linux.inc</filename> file in + <filename>meta-oe</filename> was updated. + </para> + + <para> + Recipes that rely on the kernel source code and do not inherit + the module classes might need to add explicit dependencies on + the <filename>do_shared_workdir</filename> kernel task, for example: + <literallayout class='monospaced'> + do_configure[depends] += "virtual/kernel:do_shared_workdir" + </literallayout> + </para> + </section> + + <section id='migration-1.8-ssl'> + <title>SSL 3.0 is Now Disabled in OpenSSL</title> + + <para> + SSL 3.0 is now disabled when building OpenSSL. + Disabling SSL 3.0 avoids any lingering instances of the POODLE + vulnerability. + If you feel you must re-enable SSL 3.0, then you can add an + append file (<filename>*.bbappend</filename>) for the + <filename>openssl</filename> recipe to remove "-no-ssl3" + from + <link linkend='var-EXTRA_OECONF'><filename>EXTRA_OECONF</filename></link>. + </para> + </section> + + <section id='migration-1.8-default-sysroot-poisoning'> + <title>Default Sysroot Poisoning</title> + + <para> + <filename>gcc's</filename> default sysroot and include directories + are now "poisoned". + In other words, the sysroot and include directories are being + redirected to a non-existent location in order to catch when + host directories are being used due to the correct options not + being passed. + This poisoning applies both to the cross-compiler used within the + build and to the cross-compiler produced in the SDK. + </para> + + <para> + If this change causes something in the build to fail, it almost + certainly means the various compiler flags and commands are not + being passed correctly to the underlying piece of software. + In such cases, you need to take corrective steps. + </para> + </section> + + <section id='migration-1.8-rebuild-improvements'> + <title>Rebuild Improvements</title> + + <para> + Changes have been made to the + <link linkend='ref-classes-base'><filename>base</filename></link>, + <link linkend='ref-classes-autotools'><filename>autotools</filename></link>, + and + <link linkend='ref-classes-cmake'><filename>cmake</filename></link> + classes to clean out generated files when the + <link linkend='ref-tasks-configure'><filename>do_configure</filename></link> + task needs to be re-executed. + </para> + + <para> + One of the improvements is to attempt to run "make clean" during + the <filename>do_configure</filename> task if a + <filename>Makefile</filename> exists. + Some software packages do not provide a working clean target + within their make files. + If you have such recipes, you need to set + <link linkend='var-CLEANBROKEN'><filename>CLEANBROKEN</filename></link> + to "1" within the recipe, for example: + <literallayout class='monospaced'> + CLEANBROKEN = "1" + </literallayout> + </para> + </section> + + <section id='migration-1.8-qa-check-and-validation-changes'> + <title>QA Check and Validation Changes</title> + + <para> + The following QA Check and Validation Changes have occurred: + <itemizedlist> + <listitem><para> + Usage of <filename>PRINC</filename> + previously triggered a warning. + It now triggers an error. + You should remove any remaining usage of + <filename>PRINC</filename> in any recipe or append file. + </para></listitem> + <listitem><para> + An additional QA check has been added to detect usage of + <filename>${D}</filename> in + <link linkend='var-FILES'><filename>FILES</filename></link> + values where + <link linkend='var-D'><filename>D</filename></link> values + should not be used at all. + The same check ensures that <filename>$D</filename> is used + in + <filename>pkg_preinst/pkg_postinst/pkg_prerm/pkg_postrm</filename> + functions instead of <filename>${D}</filename>. + </para></listitem> + <listitem><para> + <link linkend='var-S'><filename>S</filename></link> now + needs to be set to a valid value within a recipe. + If <filename>S</filename> is not set in the recipe, the + directory is not automatically created. + If <filename>S</filename> does not point to a directory + that exists at the time the + <link linkend='ref-tasks-unpack'><filename>do_unpack</filename></link> + task finishes, a warning will be shown. + </para></listitem> + <listitem><para> + <link linkend='var-LICENSE'><filename>LICENSE</filename></link> + is now validated for correct formatting of multiple + licenses. + If the format is invalid (e.g. multiple licenses are + specified with no operators to specify how the multiple + licenses interact), then a warning will be shown. + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='migration-1.8-miscellaneous-changes'> + <title>Miscellaneous Changes</title> + + <para> + The following miscellaneous changes have occurred: + <itemizedlist> + <listitem><para> + The <filename>send-error-report</filename> script now + expects a "-s" option to be specified before the server + address. + This assumes a server address is being specified. + </para></listitem> + <listitem><para> + The <filename>oe-pkgdata-util</filename> script now + expects a "-p" option to be specified before the + <filename>pkgdata</filename> directory, which is now + optional. + If the <filename>pkgdata</filename> directory is not + specified, the script will run BitBake to query + <link linkend='var-PKGDATA_DIR'><filename>PKGDATA_DIR</filename></link> + from the build environment. + </para></listitem> + </itemizedlist> + </para> + </section> +</section> + +</chapter> +<!-- +vim: expandtab tw=80 ts=4 +--> |