diff options
-rw-r--r-- | meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml | 41 |
1 files changed, 34 insertions, 7 deletions
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml b/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml index d31b30445..63303d7c0 100644 --- a/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml +++ b/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml @@ -28,9 +28,19 @@ zone_configuration: - value: CUSTOM description: > Custom thermal control mode for handling the use of - optical cables located behind the GPU exhaust that - could produce overtemp warnings without this mode - enabled. + PCI cards located behind the GPU exhaust that + could overtemp where the default mode is not + sufficient enough. + - value: HEAVY_IO + description: > + Heavy IO thermal control mode for handling the use + of PCI cards that produce heavy IO utilization and + could overtemp. + - value: MAX_BASE_FAN_FLOOR + description: > + Maximum base fan floor mode is for handling the + use of any hardware that requires the highest + amount of cooling even when the system may be idle. - name: Current type: string persist: true @@ -63,11 +73,28 @@ zone_configuration: - value: DEFAULT description: > Default thermal control mode + - value: CUSTOM + description: > + Custom thermal control mode for handling the use of + PCI cards located behind the GPU exhaust that + could overtemp where the default mode is not + sufficient enough. + - value: HEAVY_IO + description: > + Heavy IO thermal control mode for handling the use + of PCI cards that produce heavy IO utilization and + could overtemp. + - value: MAX_BASE_FAN_FLOOR + description: > + Maximum base fan floor mode is for handling the + use of any hardware that requires the highest + amount of cooling even when the system may be idle. - name: Current type: string persist: true values: - - value: DEFAULT - description: > - Set current thermal control mode to the - default. No other modes are supported. + - value: DEFAULT + description: > + Set current thermal control mode to the + default which will be replaced on startup if + another selected mode was persisted. |