diff options
Diffstat (limited to 'import-layers/meta-virtualization/docs/openvswitch.txt')
-rw-r--r-- | import-layers/meta-virtualization/docs/openvswitch.txt | 96 |
1 files changed, 0 insertions, 96 deletions
diff --git a/import-layers/meta-virtualization/docs/openvswitch.txt b/import-layers/meta-virtualization/docs/openvswitch.txt deleted file mode 100644 index 4410d27e4..000000000 --- a/import-layers/meta-virtualization/docs/openvswitch.txt +++ /dev/null @@ -1,96 +0,0 @@ -Simple setup for connecting openvswitch to qemu/kvm -=================================================== -This example brings up openvswitch using a private network. - -Preliminary notes -================= -1. Make sure to build kernel support for openvswitch as a module. The -openvswitch init scripts expect to load a module and upon success -continue to setup the switch. If openvswitch is compiled -statically, the init scripts not load the ovs-vswitchd daemon -and none of the configured bridges will show up in the interfaces -table (ifconfig). You can get around this limiation by running the -following by hand: - # ovs-vswitchd --pidfile --detach - -2. Verify that ovs-vswitchd is running before proceeding: - # /etc/init.d/openvswitch-switch status - ovsdb-server is running with pid 1867 - ovs-vswitchd is running with pid 1877 - -3. A kernel and rootfs is required for qemu bring up. - -Qemu Setup -========== -The host requires a /etc/qemu-ifup script to setup the bridging and tap -devices. Qemu will invoke this qemu-ifup script at startup. Here is -an example script: -$ cat /etc/qemu-fup - #!/bin/sh - # the tap is dynamically assigned and passed into this script - # as a parameter - TAP=$1 - - # Note: if booting over NFS, once the $ETH0 device is added to the bridge, - # your host will be unusable. In that case, setup networking - # init scripts appropriately and change the following to work - # with it. - ETH0="eth1" - NETMASK=255.255.255.0 - IP=192.168.1.1 - GATEWAY= - SWITCH=ovsbr0 - if [ -n "$TAP" ];then - ifconfig $TAP up - ifconfig $SWITCH down &>/dev/null - ovs-vsctl del-br $SWITCH - ovs-vsctl add-br $SWITCH - ifconfig $ETH0 0.0.0.0 - ifconfig $SWITCH $IP up netmask $NETMASK - #-- external access not required for this test. - #route add default gw $GATEWAY - ovs-vsctl add-port $SWITCH $ETH0 - ovs-vsctl add-port $SWITCH $TAP - exit 0 - else - echo "$0: No tap device" - exit 1 - fi - -Start Qemu -========== -This example will bring up qemu with a tap network interface. -Note: this command must be run as root due to the networking setup. - - $ qemu-system-x86_64 -nographic -k en-us -m 1024 \ - -net nic,macaddr=1a:46:0b:ca:bc:7a,model=virtio \ - -net tap -enable-kvm\ - -kernel /opt/dpdk-guest-kernel \ - -append 'root=/dev/vda ro console=ttyS0' \ - -drive file=/opt/intel-xeon-core-ovp-kvm-preempt-rt-dist.ext3,cache=none,if=virtio - -Once the guest OS is up and running, configure the quest network interface: - $ ifconfig eth0 192.168.1.10 - -Ping the bridge: - $ ping 192.168.1.1 - -From the host, view the bridged network: -$ ovs-vsctl show -c1212b96-ef49-4a8e-b598-09b05b854dd0 - Bridge "ovsbr0" - Port "tap0" - Interface "tap0" - Port "eth1" - Interface "eth1" - Port "ovsbr0" - Interface "ovsbr0" - type: internal - -At this point, openvswitch is up and running. If you want external -network access, you need to set a GATEWAY in the qemu-ifup script and -make sure the external device is part of the bridge. - -Note: -Proper setup will require a /etc/qemu-ifdown script to tear down the -bridge and interfaces. (not provided here). |