diff options
Diffstat (limited to 'import-layers/yocto-poky/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch')
-rw-r--r-- | import-layers/yocto-poky/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch | 422 |
1 files changed, 0 insertions, 422 deletions
diff --git a/import-layers/yocto-poky/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch b/import-layers/yocto-poky/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch deleted file mode 100644 index 2013933b6..000000000 --- a/import-layers/yocto-poky/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch +++ /dev/null @@ -1,422 +0,0 @@ -From d88af5aa0312ea18aac791d66661da79b7bcd032 Mon Sep 17 00:00:00 2001 -From: "Maxin B. John" <maxin.john@intel.com> -Date: Wed, 21 Dec 2016 15:32:07 +0200 -Subject: [PATCH] inet[6].defn: fix inverted checks for loopback - -Compared to the hurd link.defn for loopback, we see these -are inverted, meaning that you would only be able to configure -a loopback device that was _not_ named "lo" (unlikely to exist). - -The result was that we'd update /run/network/ifstate for "lo" -but never actually do anything for up/down, as shown below: - -root@localhost:~# ifconfig -s -Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg -eth0 1500 0 7736329 0 2016 0 5289422 0 0 0 BMRU -lo 65536 0 18 0 0 0 18 0 0 0 LRU -root@localhost:~# ifdown lo -root@localhost:~# echo $? -0 -root@localhost:~# ifconfig -s -Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg -eth0 1500 0 7736406 0 2016 0 5289455 0 0 0 BMRU -lo 65536 0 18 0 0 0 18 0 0 0 LRU -root@localhost:~# ifconfig lo down -root@localhost:~# ifconfig -s -Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg -eth0 1500 0 7736474 0 2016 0 5289481 0 0 0 BMRU -root@localhost:~# - -Also reverted the commit: -commit 80b878497663dae08f70b4d3cffe127b57a3cfc -which uses absolute paths to binaries called by ifup/ifdown. - -Upstream-Status: Inappropriate [OE specific] - -Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> -Signed-off-by: Maxin B. John <maxin.john@intel.com> ---- - inet.defn | 148 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 74 insertions(+), 74 deletions(-) - -diff --git a/inet.defn b/inet.defn -index 75e6744..b5f5da2 100644 ---- a/inet.defn -+++ b/inet.defn -@@ -6,10 +6,10 @@ method loopback - This method may be used to define the IPv4 loopback interface. - - up -- /bin/ip link set dev %iface% up if (!iface_is_lo()) -+ ip link set dev %iface% up if (iface_is_lo()) - - down -- /bin/ip link set dev %iface% down if (!iface_is_lo()) -+ ip link set dev %iface% down if (iface_is_lo()) - - method static - description -@@ -36,17 +36,17 @@ method static - broadcast compute_v4_broadcast - - up -- /bin/ip addr add %address%[[/%netmask%]] [[broadcast %broadcast%]] \ -+ ip addr add %address%[[/%netmask%]] [[broadcast %broadcast%]] \ - [[peer %pointopoint%]] [[scope %scope%]] dev %iface% label %iface% -- /bin/ip link set dev %iface% [[mtu %mtu%]] [[address %hwaddress%]] up -+ ip link set dev %iface% [[mtu %mtu%]] [[address %hwaddress%]] up - -- [[ /bin/ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]] -+ [[ ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]] - - down -- [[ /bin/ip route del default via %gateway% [[metric %metric%]] dev %iface% 2>&1 1>/dev/null || true ]] -- /bin/ip addr del %address%[[/%netmask%]] [[broadcast %broadcast%]] \ -+ [[ ip route del default via %gateway% [[metric %metric%]] dev %iface% 2>&1 1>/dev/null || true ]] -+ ip addr del %address%[[/%netmask%]] [[broadcast %broadcast%]] \ - [[peer %pointopoint%]] [[scope %scope%]] dev %iface% label %iface% -- /bin/ip link set dev %iface% down \ -+ ip link set dev %iface% down \ - if (iface_is_link()) - - method manual -@@ -63,12 +63,12 @@ method manual - hwaddress cleanup_hwaddress - - up -- [[/bin/ip link set dev %iface% mtu %mtu%]] -- [[/bin/ip link set dev %iface% address %hwaddress%]] -- /bin/ip link set dev %iface% up 2>/dev/null || true -+ [[ip link set dev %iface% mtu %mtu%]] -+ [[ip link set dev %iface% address %hwaddress%]] -+ ip link set dev %iface% up 2>/dev/null || true - - down -- /bin/ip link set dev %iface% down 2>/dev/null || true \ -+ ip link set dev %iface% down 2>/dev/null || true \ - if (iface_is_link() && !do_all) - - method dhcp -@@ -93,33 +93,33 @@ method dhcp - hwaddress cleanup_hwaddress - - up -- [[/bin/ip link set dev %iface% address %hwaddress%]] -- /sbin/dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ -+ [[ip link set dev %iface% address %hwaddress%]] -+ dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ - [[-e IF_METRIC=%metric%]] \ - if (execable("/sbin/dhclient")) -- /sbin/pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \ -+ pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \ - elsif (execable("/sbin/pump")) -- /sbin/udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-x hostname:%hostname%]] \ -+ udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-x hostname:%hostname%]] \ - elsif (execable("/sbin/udhcpc")) -- /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \ -+ dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \ - [[-l %leasetime%]] [[-m %metric%]] %iface% \ - elsif (execable("/sbin/dhcpcd")) - echo 'No DHCP client software found!' >/dev/stderr; false \ - elsif (1) - - down -- /sbin/dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ -+ dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ - if (execable("/sbin/dhclient")) -- /sbin/pump -i %iface% -r \ -+ pump -i %iface% -r \ - elsif (execable("/sbin/pump")) -- if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(/bin/cat /run/udhcpc.%iface%.pid); kill -TERM $(/bin/cat /run/udhcpc.%iface%.pid); fi \ -+ if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(cat /run/udhcpc.%iface%.pid); kill -TERM $(cat /run/udhcpc.%iface%.pid); fi \ - elsif (execable("/sbin/udhcpc")) -- /sbin/dhcpcd -k %iface% \ -+ dhcpcd -k %iface% \ - elsif (execable("/sbin/dhcpcd")) - echo 'No DHCP client software found!' >/dev/stderr; false \ - elsif (1) - -- /bin/ip link set dev %iface% down \ -+ ip link set dev %iface% down \ - if (iface_is_link()) - - method bootp -@@ -134,11 +134,11 @@ method bootp - whatever it really is. - - up -- /sbin/bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \ -+ bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \ - [[--hwaddr %hwaddr%]] --returniffail --serverbcast - - down -- /bin/ip link set dev %iface% down \ -+ ip link set dev %iface% down \ - if (iface_is_link()) - - method tunnel -@@ -158,13 +158,13 @@ method tunnel - ttl time -- TTL setting - mtu size -- MTU size - up -- /bin/ip tunnel add %iface% mode %mode% remote %endpoint% [[local %local%]] \ -+ ip tunnel add %iface% mode %mode% remote %endpoint% [[local %local%]] \ - [[ttl %ttl%]] -- /bin/ip link set %iface% up [[mtu %mtu%]] -- /bin/ip addr add %address%/%netmask% dev %iface% [[peer %dstaddr%]] -- [[ /bin/ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]] -+ ip link set %iface% up [[mtu %mtu%]] -+ ip addr add %address%/%netmask% dev %iface% [[peer %dstaddr%]] -+ [[ ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]] - down -- /bin/ip tunnel del %iface% -+ ip tunnel del %iface% - - method ppp - description -@@ -175,9 +175,9 @@ method ppp - unit number -- Use /number/ as the ppp unit number. - options string -- Pass /string/ as additional options to pon. - up -- /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]] -+ pon [[%provider%]] [[unit %unit%]] [[%options%]] - down -- /usr/bin/poff [[%provider%]] -+ poff [[%provider%]] - - method wvdial - description -@@ -186,10 +186,10 @@ method wvdial - options - provider name -- Use /name/ as the provider (from /etc/wvdial.conf). - up -- /sbin/start-stop-daemon --start -x /usr/bin/wvdial \ -+ start-stop-daemon --start -x /usr/bin/wvdial \ - -p /run/wvdial.%iface%.pid -b -m -- [[ %provider% ]] - down -- /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \ -+ start-stop-daemon --stop -x /usr/bin/wvdial \ - -p /run/wvdial.%iface%.pid -s 2 - - -@@ -200,9 +200,9 @@ method ipv4ll - known as APIPA or IPAC, and often colloquially referred to - as "Zeroconf address". - up -- /usr/sbin/avahi-autoipd -D %iface% -+ avahi-autoipd -D %iface% - down -- /usr/sbin/avahi-autoipd --kill %iface% -+ avahi-autoipd --kill %iface% - - architecture kfreebsd - -@@ -211,12 +211,12 @@ method loopback - This method may be used to define the IPv4 loopback interface. - - up -- /sbin/ifconfig %iface% 127.0.0.1 up \ -- if (!iface_is_lo()) -+ ifconfig %iface% 127.0.0.1 up \ -+ if (iface_is_lo()) - - down -- /sbin/ifconfig %iface% down \ -- if (!iface_is_lo()) -+ ifconfig %iface% down \ -+ if (iface_is_lo()) - - method static - description -@@ -238,15 +238,15 @@ method static - hwaddress cleanup_hwaddress - - up -- [[ /sbin/ifconfig %iface% link %hwaddress%]] -- /sbin/ifconfig %iface% %address% [[netmask %netmask%]] [[broadcast %broadcast%]] \ -+ [[ ifconfig %iface% link %hwaddress%]] -+ ifconfig %iface% %address% [[netmask %netmask%]] [[broadcast %broadcast%]] \ - [[pointopoint %pointopoint%]] [[media %media%]] [[mtu %mtu%]] \ - up -- [[ /sbin/route add default %gateway% ]] -+ [[ route add default %gateway% ]] - - down -- [[ /sbin/route del default %gateway% 2>&1 1>/dev/null || true ]] -- /sbin/ifconfig %iface% down -+ [[ route del default %gateway% 2>&1 1>/dev/null || true ]] -+ ifconfig %iface% down - - method manual - description -@@ -279,30 +279,30 @@ method dhcp - hwaddress cleanup_hwaddress - - up -- [[/sbin/ifconfig %iface% link %hwaddress%]] -- /sbin/dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ -+ [[ifconfig %iface% link %hwaddress%]] -+ dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ - [[-e IF_METRIC=%metric%]] \ - if (execable("/sbin/dhclient")) -- /sbin/udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H %hostname%]] \ -+ udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H %hostname%]] \ - [[-c %client%]] \ - elsif (execable("/sbin/udhcpc")) -- /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \ -+ dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \ - [[-l %leasetime%]] %iface% \ - elsif (execable("/sbin/dhcpcd")) - echo 'No DHCP client software found!' >/dev/stderr; false \ - elsif (1) - - down -- /sbin/dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ -+ dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \ - if (execable("/sbin/dhclient")) -- if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(/bin/cat /run/udhcpc.%iface%.pid); kill -TERM $(/bin/cat /run/udhcpc.%iface%.pid); fi \ -+ if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(cat /run/udhcpc.%iface%.pid); kill -TERM $(cat /run/udhcpc.%iface%.pid); fi \ - elsif (execable("/sbin/udhcpc")) -- /sbin/dhcpcd -k %iface% \ -+ dhcpcd -k %iface% \ - elsif (execable("/sbin/dhcpcd")) - echo 'No DHCP client software found!' >/dev/stderr; false \ - elsif (1) - -- /sbin/ifconfig %iface% down -+ ifconfig %iface% down - - method bootp - description -@@ -316,11 +316,11 @@ method bootp - whatever it really is. - - up -- /sbin/bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \ -+ bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \ - [[--hwaddr %hwaddr%]] --returniffail --serverbcast - - down -- /sbin/ifconfig %iface% down -+ ifconfig %iface% down - - method ppp - description -@@ -331,9 +331,9 @@ method ppp - unit number -- Use /number/ as the ppp unit number. - options string -- Pass /string/ as additional options to pon. - up -- /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]] -+ pon [[%provider%]] [[unit %unit%]] [[%options%]] - down -- /usr/bin/poff [[%provider%]] -+ poff [[%provider%]] - - method wvdial - description -@@ -342,10 +342,10 @@ method wvdial - options - provider name -- Use /name/ as the provider (from /etc/wvdial.conf). - up -- /sbin/start-stop-daemon --start -x /usr/bin/wvdial \ -+ start-stop-daemon --start -x /usr/bin/wvdial \ - -p /run/wvdial.%iface%.pid -b -m -- [[ %provider% ]] - down -- /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \ -+ start-stop-daemon --stop -x /usr/bin/wvdial \ - -p /run/wvdial.%iface%.pid -s 2 - - -@@ -356,9 +356,9 @@ method ipv4ll - known as APIPA or IPAC, and often colloquially referred to - as "Zeroconf address". - up -- /usr/sbin/avahi-autoipd -D %iface% -+ avahi-autoipd -D %iface% - down -- /usr/sbin/avahi-autoipd --kill %iface% -+ avahi-autoipd --kill %iface% - architecture hurd - - method loopback -@@ -367,11 +367,11 @@ method loopback - - up - inetutils-ifconfig --interface %iface% --address 127.0.0.1 --up \ -- if (!iface_is_lo()) -+ if (iface_is_lo()) - - down - inetutils-ifconfig --interface %iface% --down \ -- if (!iface_is_lo()) -+ if (iface_is_lo()) - - method static - description -@@ -432,23 +432,23 @@ method dhcp - - up - [[Warning: Option hwaddress: %hwaddress% not yet supported]] -- /sbin/dhclient -v -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \ -+ dhclient -v -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \ - if (execable("/sbin/dhclient")) -- /sbin/udhcpc -n -p /run/udhcpc.%iface///.%.pid -i %iface% [[-H %hostname%]] \ -+ udhcpc -n -p /run/udhcpc.%iface///.%.pid -i %iface% [[-H %hostname%]] \ - [[-c %client%]] \ - elsif (execable("/sbin/udhcpc")) -- /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \ -+ dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \ - [[-l %leasetime%]] %iface% \ - elsif (execable("/sbin/dhcpcd")) - echo 'No DHCP client software found!' >/dev/stderr; false \ - elsif (1) - - down -- /sbin/dhclient -v -r -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \ -+ dhclient -v -r -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \ - if (execable("/sbin/dhclient")) -- if test -f /run/udhcpc.%iface///.%.pid; then kill -USR2 $(/bin/cat /run/udhcpc.%iface///.%.pid); kill -TERM $(/bin/cat /run/udhcpc.%iface///.%.pid); fi \ -+ if test -f /run/udhcpc.%iface///.%.pid; then kill -USR2 $(cat /run/udhcpc.%iface///.%.pid); kill -TERM $(cat /run/udhcpc.%iface///.%.pid); fi \ - elsif (execable("/sbin/udhcpc")) -- /sbin/dhcpcd -k %iface% \ -+ dhcpcd -k %iface% \ - elsif (execable("/sbin/dhcpcd")) - echo 'No DHCP client software found!' >/dev/stderr; false \ - elsif (1) -@@ -482,9 +482,9 @@ method ppp - unit number -- Use /number/ as the ppp unit number. - options string -- Pass /string/ as additional options to pon. - up -- /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]] -+ pon [[%provider%]] [[unit %unit%]] [[%options%]] - down -- /usr/bin/poff [[%provider%]] -+ poff [[%provider%]] - - method wvdial - description -@@ -493,10 +493,10 @@ method wvdial - options - provider name -- Use /name/ as the provider (from /etc/wvdial.conf). - up -- /sbin/start-stop-daemon --start -x /usr/bin/wvdial \ -+ start-stop-daemon --start -x /usr/bin/wvdial \ - -p /run/wvdial.%iface///.%.pid -b -m -- [[ %provider% ]] - down -- /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \ -+ start-stop-daemon --stop -x /usr/bin/wvdial \ - -p /run/wvdial.%iface///.%.pid -s 2 - - -@@ -507,6 +507,6 @@ method ipv4ll - known as APIPA or IPAC, and often colloquially referred to - as "Zeroconf address". - up -- /usr/sbin/avahi-autoipd -D %iface% -+ avahi-autoipd -D %iface% - down -- /usr/sbin/avahi-autoipd --kill %iface% -+ avahi-autoipd --kill %iface% --- -2.4.0 - |