diff options
Diffstat (limited to 'import-layers/yocto-poky/meta/recipes-core')
32 files changed, 13473 insertions, 52 deletions
diff --git a/import-layers/yocto-poky/meta/recipes-core/base-files/base-files/profile b/import-layers/yocto-poky/meta/recipes-core/base-files/base-files/profile index 7367fd1e2..c616616ce 100644 --- a/import-layers/yocto-poky/meta/recipes-core/base-files/base-files/profile +++ b/import-layers/yocto-poky/meta/recipes-core/base-files/base-files/profile @@ -26,7 +26,7 @@ if [ -x /usr/bin/resize ] && termpath="`tty`"; then # Make sure we are on a serial console (i.e. the device used starts with /dev/tty), # otherwise we confuse e.g. the eclipse launcher which tries do use ssh case "$termpath" in - /dev/tty*) resize >/dev/null + /dev/tty[A-z]*) resize >/dev/null esac fi diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox-1.24.1/ifupdown-pass-interface-device-name-for-ipv6-route-c.patch b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox-1.24.1/ifupdown-pass-interface-device-name-for-ipv6-route-c.patch new file mode 100644 index 000000000..5715378af --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox-1.24.1/ifupdown-pass-interface-device-name-for-ipv6-route-c.patch @@ -0,0 +1,52 @@ +From 06fcf98f6ca40dc6b823d7d6231a240a1794ef2d Mon Sep 17 00:00:00 2001 +From: Haiqing Bai <Haiqing.Bai@windriver.com> +Date: Tue, 28 Feb 2017 10:40:37 +0800 +Subject: [PATCH] ifupdown: pass interface device name for ipv6 route commands +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 028524317d8d0011ed38e86e507a06738a5b5a97 from upstream + +IPv6 routes need the device argument for link-local routes, or they +cannot be used at all. E.g. "gateway fe80::def" seems to be used in +some places, but kernel refuses to insert the route unless device +name is explicitly specified in the route addition. + +Signed-off-by: Timo Teräs <timo.teras@iki.fi> +Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> + +Upstream-Status: Backport +Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com> +--- + networking/ifupdown.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +diff --git a/networking/ifupdown.c b/networking/ifupdown.c +index 17bc4e9..a00f68d 100644 +--- a/networking/ifupdown.c ++++ b/networking/ifupdown.c +@@ -394,8 +394,8 @@ static int FAST_FUNC static_up6(struct interface_defn_t *ifd, execfn *exec) + # if ENABLE_FEATURE_IFUPDOWN_IP + result = execute("ip addr add %address%/%netmask% dev %iface%[[ label %label%]]", ifd, exec); + result += execute("ip link set[[ mtu %mtu%]][[ addr %hwaddress%]] %iface% up", ifd, exec); +- /* Was: "[[ ip ....%gateway% ]]". Removed extra spaces w/o checking */ +- result += execute("[[ip route add ::/0 via %gateway%]][[ metric %metric%]]", ifd, exec); ++ /* Reportedly, IPv6 needs "dev %iface%", but IPv4 does not: */ ++ result += execute("[[ip route add ::/0 via %gateway% dev %iface%]][[ metric %metric%]]", ifd, exec); + # else + result = execute("ifconfig %iface%[[ media %media%]][[ hw %hwaddress%]][[ mtu %mtu%]] up", ifd, exec); + result += execute("ifconfig %iface% add %address%/%netmask%", ifd, exec); +@@ -421,7 +421,8 @@ static int FAST_FUNC v4tunnel_up(struct interface_defn_t *ifd, execfn *exec) + "%endpoint%[[ local %local%]][[ ttl %ttl%]]", ifd, exec); + result += execute("ip link set %iface% up", ifd, exec); + result += execute("ip addr add %address%/%netmask% dev %iface%", ifd, exec); +- result += execute("[[ip route add ::/0 via %gateway%]]", ifd, exec); ++ /* Reportedly, IPv6 needs "dev %iface%", but IPv4 does not: */ ++ result += execute("[[ip route add ::/0 via %gateway% dev %iface%]]", ifd, exec); + return ((result == 4) ? 4 : 0); + } + +-- +1.9.1 + diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch index 8bcbd73de..78520f0d9 100644 --- a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch @@ -1,35 +1,24 @@ -From 198f18addf1d814c2fefcb492f3b9fbd221669bb Mon Sep 17 00:00:00 2001 -From: "Maxin B. John" <maxin.john@intel.com> -Date: Wed, 20 Apr 2016 18:24:45 +0300 -Subject: [PATCH] flock: update the behaviour of -c parameter to match upstream - -In upstream, -c 'PROG ARGS' means "run sh -c 'PROG ARGS'" +From e1d426fd65c00a6d01a10d85edf8a294ae8a2d2b Mon Sep 17 00:00:00 2001 +From: Denys Vlasenko <vda.linux@googlemail.com> +Date: Sun, 24 Apr 2016 18:19:49 +0200 +Subject: [PATCH] flock: fix -c; improve error handling of fork+exec function old new delta -flock_main 286 377 +91 -.rodata 155849 155890 +41 +flock_main 254 334 +80 -Upstream-Status: Submitted -[ http://lists.busybox.net/pipermail/busybox/2016-April/084142.html ] +Upstream-Status: Backport +Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Maxin B. John <maxin.john@intel.com> --- - util-linux/flock.c | 20 ++++++++++++++------ - 1 file changed, 14 insertions(+), 6 deletions(-) + util-linux/flock.c | 19 +++++++++++++++++-- + 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/util-linux/flock.c b/util-linux/flock.c -index 05a747f..c85a25d 100644 +index 05a747f..539a835 100644 --- a/util-linux/flock.c +++ b/util-linux/flock.c -@@ -20,6 +20,7 @@ int flock_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; - int flock_main(int argc UNUSED_PARAM, char **argv) - { - int mode, opt, fd; -+ char *cmd_args[4]; - enum { - OPT_s = (1 << 0), - OPT_x = (1 << 1), -@@ -57,7 +58,6 @@ int flock_main(int argc UNUSED_PARAM, char **argv) +@@ -57,7 +57,6 @@ int flock_main(int argc UNUSED_PARAM, char **argv) /* If it is "flock FILE -c PROG", then -c isn't caught by getopt32: * we use "+" in order to support "flock -opt FILE PROG -with-opts", * we need to remove -c by hand. @@ -37,35 +26,37 @@ index 05a747f..c85a25d 100644 */ if (argv[0] && argv[0][0] == '-' -@@ -65,7 +65,10 @@ int flock_main(int argc UNUSED_PARAM, char **argv) - || (ENABLE_LONG_OPTS && strcmp(argv[0] + 1, "-command") == 0) +@@ -66,6 +65,9 @@ int flock_main(int argc UNUSED_PARAM, char **argv) ) ) { -- argv++; -+ if (argc != optind + 3) -+ bb_error_msg_and_die("-c requires exactly one command argument"); -+ else -+ argv++; + argv++; ++ if (argv[1]) ++ bb_error_msg_and_die("-c takes only one argument"); ++ opt |= OPT_c; } if (OPT_s == LOCK_SH && OPT_x == LOCK_EX && OPT_n == LOCK_NB && OPT_u == LOCK_UN) { -@@ -89,9 +92,14 @@ int flock_main(int argc UNUSED_PARAM, char **argv) - return EXIT_FAILURE; +@@ -90,8 +92,21 @@ int flock_main(int argc UNUSED_PARAM, char **argv) bb_perror_nomsg_and_die(); } -- + - if (argv[0]) -- return spawn_and_wait(argv); -- -+ if (argv[0]) { -+ cmd_args[0] = getenv("SHELL"); -+ if (!cmd_args[0]) -+ cmd_args[0] = (char*)DEFAULT_SHELL; -+ cmd_args[1] = (char*)"-c"; -+ cmd_args[2] = argv[0]; -+ cmd_args[3] = NULL; -+ return spawn_and_wait(cmd_args); -+ } ++ if (argv[0]) { ++ if (!(opt & OPT_c)) { ++ int rc = spawn_and_wait(argv); ++ if (rc < 0) ++ bb_simple_perror_msg(argv[0]); ++ return rc; ++ } ++ /* -c 'PROG ARGS' means "run sh -c 'PROG ARGS'" */ ++ argv -= 2; ++ argv[0] = (char*)get_shell_name(); ++ argv[1] = (char*)"-c"; ++ /* argv[2] = "PROG ARGS"; */ ++ /* argv[3] = NULL; */ + return spawn_and_wait(argv); ++ } + return EXIT_SUCCESS; } -- diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch new file mode 100644 index 000000000..aac5b4029 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch @@ -0,0 +1,134 @@ +From b5a9234272e6084557224c73ab7737ed47f09848 Mon Sep 17 00:00:00 2001 +From: Lukasz Nowak <lnowak@tycoint.com> +Date: Wed, 23 Nov 2016 12:48:21 +0000 +Subject: [PATCH v2] libiproute: handle table ids larger than 255 + +Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values. +In order to preserve compatibility, the old 8-bit field: rtm_table is still +in use when table id is lower than 256. + +Add support for the 32-bit table id (RTA_TABLE attribute) in: +- ip route print +- ip route modify +- ip rule print +- ip rule modify + +Add printing of table ids to ip route. + +Changes are compatible with the mainline iproute2 utilities. + +These changes are required for compatibility with ConnMan, which by default +uses table ids greater than 255. + +Upstream-Status: Submitted [http://lists.busybox.net/pipermail/busybox/2016-December/084989.html] + +Signed-off-by: Lukasz Nowak <lnowak@tycoint.com> +--- + networking/libiproute/iproute.c | 24 ++++++++++++++++++++---- + networking/libiproute/iprule.c | 11 +++++++++-- + 2 files changed, 29 insertions(+), 6 deletions(-) + +diff --git a/networking/libiproute/iproute.c b/networking/libiproute/iproute.c +index 6ecd5f7..d5af498 100644 +--- a/networking/libiproute/iproute.c ++++ b/networking/libiproute/iproute.c +@@ -87,6 +87,7 @@ static int FAST_FUNC print_route(const struct sockaddr_nl *who UNUSED_PARAM, + inet_prefix dst; + inet_prefix src; + int host_len = -1; ++ uint32_t tid; + + if (n->nlmsg_type != RTM_NEWROUTE && n->nlmsg_type != RTM_DELROUTE) { + fprintf(stderr, "Not a route: %08x %08x %08x\n", +@@ -99,6 +100,14 @@ static int FAST_FUNC print_route(const struct sockaddr_nl *who UNUSED_PARAM, + if (len < 0) + bb_error_msg_and_die("wrong nlmsg len %d", len); + ++ memset(tb, 0, sizeof(tb)); ++ parse_rtattr(tb, RTA_MAX, RTM_RTA(r), len); ++ ++ if (tb[RTA_TABLE]) ++ tid = *(uint32_t *)RTA_DATA(tb[RTA_TABLE]); ++ else ++ tid = r->rtm_table; ++ + if (r->rtm_family == AF_INET6) + host_len = 128; + else if (r->rtm_family == AF_INET) +@@ -128,7 +137,7 @@ static int FAST_FUNC print_route(const struct sockaddr_nl *who UNUSED_PARAM, + } + } + } else { +- if (G_filter.tb > 0 && G_filter.tb != r->rtm_table) { ++ if (G_filter.tb > 0 && G_filter.tb != tid) { + return 0; + } + } +@@ -157,10 +166,8 @@ static int FAST_FUNC print_route(const struct sockaddr_nl *who UNUSED_PARAM, + return 0; + } + +- memset(tb, 0, sizeof(tb)); + memset(&src, 0, sizeof(src)); + memset(&dst, 0, sizeof(dst)); +- parse_rtattr(tb, RTA_MAX, RTM_RTA(r), len); + + if (tb[RTA_SRC]) { + src.bitlen = r->rtm_src_len; +@@ -283,6 +290,10 @@ static int FAST_FUNC print_route(const struct sockaddr_nl *who UNUSED_PARAM, + if (tb[RTA_OIF]) { + printf("dev %s ", ll_index_to_name(*(int*)RTA_DATA(tb[RTA_OIF]))); + } ++#if ENABLE_FEATURE_IP_RULE ++ if (tid && tid != RT_TABLE_MAIN && !G_filter.tb) ++ printf("table %s ", rtnl_rttable_n2a(tid)); ++#endif + + /* Todo: parse & show "proto kernel", "scope link" here */ + +@@ -434,7 +445,12 @@ IF_FEATURE_IP_RULE(ARG_table,) + NEXT_ARG(); + if (rtnl_rttable_a2n(&tid, *argv)) + invarg(*argv, "table"); +- req.r.rtm_table = tid; ++ if (tid < 256) ++ req.r.rtm_table = tid; ++ else { ++ req.r.rtm_table = RT_TABLE_UNSPEC; ++ addattr32(&req.n, sizeof(req), RTA_TABLE, tid); ++ } + #endif + } else if (arg == ARG_dev || arg == ARG_oif) { + NEXT_ARG(); +diff --git a/networking/libiproute/iprule.c b/networking/libiproute/iprule.c +index 774a3e2..3fac7c5 100644 +--- a/networking/libiproute/iprule.c ++++ b/networking/libiproute/iprule.c +@@ -119,7 +119,9 @@ static int FAST_FUNC print_rule(const struct sockaddr_nl *who UNUSED_PARAM, + printf("iif %s ", (char*)RTA_DATA(tb[RTA_IIF])); + } + +- if (r->rtm_table) ++ if (tb[RTA_TABLE]) ++ printf("lookup %s ", rtnl_rttable_n2a(*(uint32_t*)RTA_DATA(tb[RTA_TABLE]))); ++ else if (r->rtm_table) + printf("lookup %s ", rtnl_rttable_n2a(r->rtm_table)); + + if (tb[RTA_FLOW]) { +@@ -259,7 +261,12 @@ static int iprule_modify(int cmd, char **argv) + NEXT_ARG(); + if (rtnl_rttable_a2n(&tid, *argv)) + invarg(*argv, "table ID"); +- req.r.rtm_table = tid; ++ if (tid < 256) ++ req.r.rtm_table = tid; ++ else { ++ req.r.rtm_table = RT_TABLE_UNSPEC; ++ addattr32(&req.n, sizeof(req), RTA_TABLE, tid); ++ } + table_ok = 1; + } else if (key == ARG_dev || + key == ARG_iif +-- +2.7.4 + diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/BUG9071_buffer_overflow_arp.patch b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/BUG9071_buffer_overflow_arp.patch new file mode 100644 index 000000000..828694cbb --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/BUG9071_buffer_overflow_arp.patch @@ -0,0 +1,53 @@ +busybox1.24.1: Fix busybox - (local) cmdline stack buffer overwrite + +[No upstream tracking] -- https://bugs.busybox.net/show_bug.cgi?id=9071 + +busybox - (local) cmdline stack buffer overwrite + +Busybox provides an `arp` applet which is missing an array bounds check for +command-line parameter `IFNAME`. It is therefore vulnerable to a command-line +based local stack buffer overwrite effectively allowing local users to write +past a 16 bytes fixed stack buffer. This leads to two scenarios, one (A) where +an IOCTL for GET_HW_ADDRESS (`SIOCGIFHWADDR`) fails and results in a corrupted +`va_list` being passed to `*printf()` and one (B) where an attacker might provide +valid params for the IOCTL and trick the program to proceed and result in a +`RET eip overwrite` eventually gaining code execution. + +Upstream-Status: Backport [https://git.busybox.net/busybox/commit/networking/arp.c?id=88e2b1cb626761b1924305b761a5dfc723613c4e] +BUG: BUG9071 +Signed-off-by: Martin Balik <martin.balik@siemens.com> +Signed-off-by: Pascal Bach <pascal.bach@siemens.com> + +-- + +diff --git a/networking/arp.c b/networking/arp.c +index 0099aa5..87eb327 100644 +--- a/networking/arp.c ++++ b/networking/arp.c +@@ -176,7 +176,7 @@ static int arp_del(char **args) + if (flags == 0) + flags = 3; + +- strncpy(req.arp_dev, device, sizeof(req.arp_dev)); ++ strncpy_IFNAMSIZ(req.arp_dev, device); + + err = -1; + +@@ -217,7 +217,7 @@ static void arp_getdevhw(char *ifname, struct sockaddr *sa) + struct ifreq ifr; + const struct hwtype *xhw; + +- strcpy(ifr.ifr_name, ifname); ++ strncpy_IFNAMSIZ(ifr.ifr_name, ifname); + ioctl_or_perror_and_die(sockfd, SIOCGIFHWADDR, &ifr, + "can't get HW-Address for '%s'", ifname); + if (hw_set && (ifr.ifr_hwaddr.sa_family != hw->type)) { +@@ -330,7 +330,7 @@ static int arp_set(char **args) + /* Fill in the remainder of the request. */ + req.arp_flags = flags; + +- strncpy(req.arp_dev, device, sizeof(req.arp_dev)); ++ strncpy_IFNAMSIZ(req.arp_dev, device); + + /* Call the kernel. */ + if (option_mask32 & ARP_OPT_v) diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/CVE-2016-6301.patch b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/CVE-2016-6301.patch new file mode 100644 index 000000000..851bc20f7 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox/CVE-2016-6301.patch @@ -0,0 +1,37 @@ +busybox1.24.1: Fix CVE-2016-6301 + +[No upstream tracking] -- https://bugzilla.redhat.com/show_bug.cgi?id=1363710 + +ntpd: NTP server denial of service flaw + +The busybox NTP implementation doesn't check the NTP mode of packets +received on the server port and responds to any packet with the right +size. This includes responses from another NTP server. An attacker can +send a packet with a spoofed source address in order to create an +infinite loop of responses between two busybox NTP servers. Adding +more packets to the loop increases the traffic between the servers +until one of them has a fully loaded CPU and/or network. + +Upstream-Status: Backport [https://git.busybox.net/busybox/commit/?id=150dc7a2b483b8338a3e185c478b4b23ee884e71] +CVE: CVE-2016-6301 +Signed-off-by: Andrej Valek <andrej.valek@siemens.com> +Signed-off-by: Pascal Bach <pascal.bach@siemens.com> + +diff --git a/networking/ntpd.c b/networking/ntpd.c +index 9732c9b..0f6a55f 100644 +--- a/networking/ntpd.c ++++ b/networking/ntpd.c +@@ -1985,6 +1985,13 @@ recv_and_process_client_pkt(void /*int fd*/) + goto bail; + } + ++ /* Respond only to client and symmetric active packets */ ++ if ((msg.m_status & MODE_MASK) != MODE_CLIENT ++ && (msg.m_status & MODE_MASK) != MODE_SYM_ACT ++ ) { ++ goto bail; ++ } ++ + query_status = msg.m_status; + query_xmttime = msg.m_xmttime; + diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox_1.24.1.bb b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox_1.24.1.bb index df0e13126..400cdfe28 100644 --- a/import-layers/yocto-poky/meta/recipes-core/busybox/busybox_1.24.1.bb +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/busybox_1.24.1.bb @@ -47,12 +47,16 @@ SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \ file://CVE-2016-2148.patch \ file://CVE-2016-2147.patch \ file://CVE-2016-2147_2.patch \ + file://CVE-2016-6301.patch \ file://ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch \ file://makefile-fix-backport.patch \ file://0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch \ file://busybox-kbuild-race-fix-commit-d8e61bb.patch \ file://commit-applet_tables-fix-commit-0dddbc1.patch \ file://makefile-libbb-race.patch \ + file://0001-libiproute-handle-table-ids-larger-than-255.patch \ + file://ifupdown-pass-interface-device-name-for-ipv6-route-c.patch \ + file://BUG9071_buffer_overflow_arp.patch \ " SRC_URI_append_libc-musl = " file://musl.cfg " diff --git a/import-layers/yocto-poky/meta/recipes-core/busybox/files/mdev.conf b/import-layers/yocto-poky/meta/recipes-core/busybox/files/mdev.conf index 17e93da7c..4e9c23f14 100644 --- a/import-layers/yocto-poky/meta/recipes-core/busybox/files/mdev.conf +++ b/import-layers/yocto-poky/meta/recipes-core/busybox/files/mdev.conf @@ -39,4 +39,6 @@ input/mouse.* 0:0 0660 tun[0-9]* 0:0 0660 =net/ [hs]d[a-z][0-9]? 0:0 660 */etc/mdev/mdev-mount.sh +mmcblk[0-9]rpmb 0:0 660 +mmcblk[0-9]boot[0-9] 0:0 660 mmcblk[0-9].* 0:0 660 */etc/mdev/mdev-mount.sh diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc.inc b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc.inc index e85c7044a..7bae0e955 100644 --- a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc.inc +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc.inc @@ -78,3 +78,9 @@ do_configure_prepend() { } GLIBC_ADDONS ?= "nptl,libidn" + +# Enable backtrace from abort() +do_configure_append_arm () { + echo "CFLAGS-abort.c = -fasynchronous-unwind-tables" >> ${B}/configparms + echo "CFLAGS-raise.c = -fasynchronous-unwind-tables" >> ${B}/configparms +} diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0001-Add-atomic_exchange_relaxed.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0001-Add-atomic_exchange_relaxed.patch new file mode 100644 index 000000000..a33a135f7 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0001-Add-atomic_exchange_relaxed.patch @@ -0,0 +1,58 @@ +From ce74a620bf9e1a40b7ba06d35160e20633a4d8bb Mon Sep 17 00:00:00 2001 +From: Catalin Enache <catalin.enache@windriver.com> +Date: Fri, 7 Jul 2017 13:11:16 +0300 +Subject: [PATCH 1/6] Add atomic_exchange_relaxed. + +* include/atomic.h (atomic_exchange_relaxed): New + +Upstream-Status: Backport + +Author: Torvald Riegel <triegel@redhat.com> +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + ChangeLog | 4 ++++ + include/atomic.h | 9 +++++++++ + 2 files changed, 13 insertions(+) + +diff --git a/ChangeLog b/ChangeLog +index 0fbda90..cb87279 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,7 @@ ++2016-08-05 Torvald Riegel <triegel@redhat.com> ++ ++ * include/atomic.h (atomic_exchange_relaxed): New. ++ + 2016-01-28 Carlos O'Donell <carlos@redhat.com> + Alexey Makhalov <amakhalov@vmware.com> + Florian Weimer <fweimer@redhat.com> +diff --git a/include/atomic.h b/include/atomic.h +index ad3db25..129ee24 100644 +--- a/include/atomic.h ++++ b/include/atomic.h +@@ -588,6 +588,9 @@ void __atomic_link_error (void); + __atomic_compare_exchange_n ((mem), (expected), (desired), 1, \ + __ATOMIC_RELEASE, __ATOMIC_RELAXED); }) + ++# define atomic_exchange_relaxed(mem, desired) \ ++ ({ __atomic_check_size((mem)); \ ++ __atomic_exchange_n ((mem), (desired), __ATOMIC_RELAXED); }) + # define atomic_exchange_acquire(mem, desired) \ + ({ __atomic_check_size((mem)); \ + __atomic_exchange_n ((mem), (desired), __ATOMIC_ACQUIRE); }) +@@ -684,6 +687,12 @@ void __atomic_link_error (void); + *(expected) == __atg103_expected; }) + # endif + ++/* XXX Fall back to acquire MO because archs do not define a weaker ++ atomic_exchange. */ ++# ifndef atomic_exchange_relaxed ++# define atomic_exchange_relaxed(mem, val) \ ++ atomic_exchange_acq ((mem), (val)) ++# endif + # ifndef atomic_exchange_acquire + # define atomic_exchange_acquire(mem, val) \ + atomic_exchange_acq ((mem), (val)) +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0002-Add-atomic-operations-required-by-the-new-condition-.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0002-Add-atomic-operations-required-by-the-new-condition-.patch new file mode 100644 index 000000000..c4747fa27 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0002-Add-atomic-operations-required-by-the-new-condition-.patch @@ -0,0 +1,124 @@ +From b85e30e655027132c4326d2fdde010c517165aaf Mon Sep 17 00:00:00 2001 +From: Catalin Enache <catalin.enache@windriver.com> +Date: Fri, 30 Jun 2017 14:27:34 +0300 +Subject: [PATCH 2/6] Add atomic operations required by the new condition + variable. + + * include/atomic.h (atomic_fetch_and_relaxed, + atomic_fetch_and_release, atomic_fetch_or_release, + atomic_fetch_xor_release): New. + +Upstream-Status: Backport + +Author: Torvald Riegel <triegel@redhat.com> +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + ChangeLog | 6 ++++++ + include/atomic.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 53 insertions(+) + +diff --git a/ChangeLog b/ChangeLog +index cb87279..96b6da2 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,9 @@ ++2016-08-09 Torvald Riegel <triegel@redhat.com> ++ ++ * include/atomic.h (atomic_fetch_and_relaxed, ++ atomic_fetch_and_release, atomic_fetch_or_release, ++ atomic_fetch_xor_release): New. ++ + 2016-08-05 Torvald Riegel <triegel@redhat.com> + + * include/atomic.h (atomic_exchange_relaxed): New. +diff --git a/include/atomic.h b/include/atomic.h +index 129ee24..5a8e7e7 100644 +--- a/include/atomic.h ++++ b/include/atomic.h +@@ -611,9 +611,15 @@ void __atomic_link_error (void); + ({ __atomic_check_size((mem)); \ + __atomic_fetch_add ((mem), (operand), __ATOMIC_ACQ_REL); }) + ++# define atomic_fetch_and_relaxed(mem, operand) \ ++ ({ __atomic_check_size((mem)); \ ++ __atomic_fetch_and ((mem), (operand), __ATOMIC_RELAXED); }) + # define atomic_fetch_and_acquire(mem, operand) \ + ({ __atomic_check_size((mem)); \ + __atomic_fetch_and ((mem), (operand), __ATOMIC_ACQUIRE); }) ++# define atomic_fetch_and_release(mem, operand) \ ++ ({ __atomic_check_size((mem)); \ ++ __atomic_fetch_and ((mem), (operand), __ATOMIC_RELEASE); }) + + # define atomic_fetch_or_relaxed(mem, operand) \ + ({ __atomic_check_size((mem)); \ +@@ -621,6 +627,13 @@ void __atomic_link_error (void); + # define atomic_fetch_or_acquire(mem, operand) \ + ({ __atomic_check_size((mem)); \ + __atomic_fetch_or ((mem), (operand), __ATOMIC_ACQUIRE); }) ++# define atomic_fetch_or_release(mem, operand) \ ++ ({ __atomic_check_size((mem)); \ ++ __atomic_fetch_or ((mem), (operand), __ATOMIC_RELEASE); }) ++ ++# define atomic_fetch_xor_release(mem, operand) \ ++ ({ __atomic_check_size((mem)); \ ++ __atomic_fetch_xor ((mem), (operand), __ATOMIC_RELEASE); }) + + #else /* !USE_ATOMIC_COMPILER_BUILTINS */ + +@@ -724,12 +737,24 @@ void __atomic_link_error (void); + atomic_exchange_and_add_acq ((mem), (operand)); }) + # endif + ++/* XXX Fall back to acquire MO because archs do not define a weaker ++ atomic_and_val. */ ++# ifndef atomic_fetch_and_relaxed ++# define atomic_fetch_and_relaxed(mem, operand) \ ++ atomic_fetch_and_acquire ((mem), (operand)) ++# endif + /* XXX The default for atomic_and_val has acquire semantics, but this is not + documented. */ + # ifndef atomic_fetch_and_acquire + # define atomic_fetch_and_acquire(mem, operand) \ + atomic_and_val ((mem), (operand)) + # endif ++# ifndef atomic_fetch_and_release ++/* XXX This unnecessarily has acquire MO. */ ++# define atomic_fetch_and_release(mem, operand) \ ++ ({ atomic_thread_fence_release (); \ ++ atomic_and_val ((mem), (operand)); }) ++# endif + + /* XXX The default for atomic_or_val has acquire semantics, but this is not + documented. */ +@@ -743,6 +768,28 @@ void __atomic_link_error (void); + # define atomic_fetch_or_relaxed(mem, operand) \ + atomic_fetch_or_acquire ((mem), (operand)) + # endif ++/* XXX Contains an unnecessary acquire MO because archs do not define a weaker ++ atomic_or_val. */ ++# ifndef atomic_fetch_or_release ++# define atomic_fetch_or_release(mem, operand) \ ++ ({ atomic_thread_fence_release (); \ ++ atomic_fetch_or_acquire ((mem), (operand)); }) ++# endif ++ ++# ifndef atomic_fetch_xor_release ++# define atomic_fetch_xor_release(mem, operand) \ ++ ({ __typeof (*(mem)) __atg104_old; \ ++ __typeof (mem) __atg104_memp = (mem); \ ++ __typeof (*(mem)) __atg104_op = (operand); \ ++ \ ++ do \ ++ __atg104_old = (*__atg104_memp); \ ++ while (__builtin_expect \ ++ (atomic_compare_and_exchange_bool_rel ( \ ++ __atg104_memp, __atg104_old ^ __atg104_op, __atg104_old), 0));\ ++ \ ++ __atg104_old; }) ++#endif + + #endif /* !USE_ATOMIC_COMPILER_BUILTINS */ + +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0003-Add-pretty-printers-for-the-NPTL-lock-types.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0003-Add-pretty-printers-for-the-NPTL-lock-types.patch new file mode 100644 index 000000000..9eb635d71 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0003-Add-pretty-printers-for-the-NPTL-lock-types.patch @@ -0,0 +1,3197 @@ +From 246fee86fc90c57738ee282a061039f82832f4ea Mon Sep 17 00:00:00 2001 +From: Catalin Enache <catalin.enache@windriver.com> +Date: Fri, 30 Jun 2017 13:42:04 +0300 +Subject: [PATCH 3/6] Add pretty printers for the NPTL lock types + +This patch adds pretty printers for the following NPTL types: + +- pthread_mutex_t +- pthread_mutexattr_t +- pthread_cond_t +- pthread_condattr_t +- pthread_rwlock_t +- pthread_rwlockattr_t + +To load the pretty printers into your gdb session, do the following: + +python +import sys +sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') +end + +source /path/to/glibc/source/pretty-printers/nptl-printers.py + +You can check which printers are registered and enabled by issuing the +'info pretty-printer' gdb command. Printers should trigger automatically when +trying to print a variable of one of the types mentioned above. + +The printers are architecture-independent, and were tested on an AMD64 running +Ubuntu 14.04 and an x86 VM running Fedora 24. + +In order to work, the printers need to know the values of various flags that +are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since +replicating these constants in the printers file itself would create a +maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses +to extract the constants. This script is pretty much the same as gen-as-const.awk, +except it doesn't cast the constant values to 'long' and is thorougly documented. +The constants need only to be enumerated in a .pysym file, which is then referenced +by a Make variable called gen-py-const-headers. + +As for the install directory, I discussed this with Mike Frysinger and Siddhesh +Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't +block merging of this one. + +In addition, I've written a series of test cases for the pretty printers. +Each lock type (mutex, condvar and rwlock) has two test programs, one for itself +and other for its related 'attributes' object. Each test program in turn has a +PExpect-based Python script that drives gdb and compares its output to the +expected printer's. The tests run on the glibc host, which is assumed to have +both gdb and PExpect; if either is absent the tests will fail with code 77 +(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. +I've tested the printers on both native builds and a cross build using a Beaglebone +Black running Debian, with the build system's filesystem shared with the board +through NFS. + +Finally, I've written a README that explains all this and more. + + * INSTALL: Regenerated. + * Makeconfig: Add comments and whitespace to make the control flow + clearer. + (+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests, + installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath, + link-libc-tests-after-rpath-link, link-libc-printers-tests): New. + (rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link, + link-libc-tests): Use the new variables as required. + * Makerules ($(py-const)): New rule. + generated: Add $(py-const). + * README.pretty-printers: New file. + * Rules (tests-printers-programs, tests-printers-out, py-env): New. + (others): Depend on $(py-const). + (tests): Depend on $(tests-printers-programs) or $(tests-printers-out), + as required. Pass $(tests-printers) to merge-test-results.sh. + * manual/install.texi: Add requirements for testing the pretty printers. + * nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers, + CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c, + CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c, + CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c, + tests-printers-libs): Define. + * nptl/nptl-printers.py: New file. + * nptl/nptl_lock_constants.pysym: Likewise. + * nptl/test-cond-printers.c: Likewise. + * nptl/test-cond-printers.py: Likewise. + * nptl/test-condattr-printers.c: Likewise. + * nptl/test-condattr-printers.py: Likewise. + * nptl/test-mutex-printers.c: Likewise. + * nptl/test-mutex-printers.py: Likewise. + * nptl/test-mutexattr-printers.c: Likewise. + * nptl/test-mutexattr-printers.py: Likewise. + * nptl/test-rwlock-printers.c: Likewise. + * nptl/test-rwlock-printers.py: Likewise. + * nptl/test-rwlockattr-printers.c: Likewise. + * nptl/test-rwlockattr-printers.py: Likewise. + * scripts/gen-py-const.awk: Likewise. + * scripts/test_printers_common.py: Likewise. + * scripts/test_printers_exceptions.py: Likewise. + +Upstream-Status: Backport + +Author: Martin Galvan <martin.galvan@tallertechnologies.com> +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + ChangeLog | 45 +++ + INSTALL | 27 ++ + Makeconfig | 76 ++++- + Makerules | 46 +++ + NEWS | 6 + + README.pretty-printers | 169 ++++++++++ + Rules | 44 ++- + manual/install.texi | 30 ++ + nptl/Makefile | 18 + + nptl/nptl-printers.py | 633 ++++++++++++++++++++++++++++++++++++ + nptl/nptl_lock_constants.pysym | 75 +++++ + nptl/test-cond-printers.c | 57 ++++ + nptl/test-cond-printers.py | 50 +++ + nptl/test-condattr-printers.c | 94 ++++++ + nptl/test-condattr-printers.py | 71 ++++ + nptl/test-mutex-printers.c | 151 +++++++++ + nptl/test-mutex-printers.py | 97 ++++++ + nptl/test-mutexattr-printers.c | 144 ++++++++ + nptl/test-mutexattr-printers.py | 101 ++++++ + nptl/test-rwlock-printers.c | 78 +++++ + nptl/test-rwlock-printers.py | 64 ++++ + nptl/test-rwlockattr-printers.c | 98 ++++++ + nptl/test-rwlockattr-printers.py | 73 +++++ + scripts/gen-py-const.awk | 118 +++++++ + scripts/test_printers_common.py | 364 +++++++++++++++++++++ + scripts/test_printers_exceptions.py | 61 ++++ + 26 files changed, 2770 insertions(+), 20 deletions(-) + create mode 100644 README.pretty-printers + create mode 100644 nptl/nptl-printers.py + create mode 100644 nptl/nptl_lock_constants.pysym + create mode 100644 nptl/test-cond-printers.c + create mode 100644 nptl/test-cond-printers.py + create mode 100644 nptl/test-condattr-printers.c + create mode 100644 nptl/test-condattr-printers.py + create mode 100644 nptl/test-mutex-printers.c + create mode 100644 nptl/test-mutex-printers.py + create mode 100644 nptl/test-mutexattr-printers.c + create mode 100644 nptl/test-mutexattr-printers.py + create mode 100644 nptl/test-rwlock-printers.c + create mode 100644 nptl/test-rwlock-printers.py + create mode 100644 nptl/test-rwlockattr-printers.c + create mode 100644 nptl/test-rwlockattr-printers.py + create mode 100644 scripts/gen-py-const.awk + create mode 100644 scripts/test_printers_common.py + create mode 100644 scripts/test_printers_exceptions.py + +diff --git a/ChangeLog b/ChangeLog +index 96b6da2..8036c1e 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,48 @@ ++2016-12-08 Martin Galvan <martin.galvan@tallertechnologies.com> ++ ++ * INSTALL: Regenerated. ++ * Makeconfig: Add comments and whitespace to make the control flow ++ clearer. ++ (+link-printers-tests, +link-pie-printers-tests, ++ CFLAGS-printers-tests, installed-rtld-LDFLAGS, ++ built-rtld-LDFLAGS, link-libc-rpath, ++ link-libc-tests-after-rpath-link, ++ link-libc-printers-tests): New. ++ (rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link, ++ link-libc-tests): Use the new variables as required. ++ * Makerules ($(py-const)): New rule. ++ generated: Add $(py-const). ++ * README.pretty-printers: New file. ++ * Rules (tests-printers-programs, tests-printers-out, py-env): New. ++ (others): Depend on $(py-const). ++ (tests): Depend on $(tests-printers-programs) or ++ $(tests-printers-out), ++ as required. Pass $(tests-printers) to merge-test-results.sh. ++ * manual/install.texi: Add requirements for testing the pretty ++ printers. ++ * nptl/Makefile (gen-py-const-headers, pretty-printers, ++ tests-printers, CFLAGS-test-mutexattr-printers.c ++ CFLAGS-test-mutex-printers.c, CFLAGS-test-condattr-printers.c, ++ CFLAGS-test-cond-printers.c, CFLAGS-test-rwlockattr-printers.c ++ CFLAGS-test-rwlock-printers.c, tests-printers-libs): Define. ++ * nptl/nptl-printers.py: New file. ++ * nptl/nptl_lock_constants.pysym: Likewise. ++ * nptl/test-cond-printers.c: Likewise. ++ * nptl/test-cond-printers.py: Likewise. ++ * nptl/test-condattr-printers.c: Likewise. ++ * nptl/test-condattr-printers.py: Likewise. ++ * nptl/test-mutex-printers.c: Likewise. ++ * nptl/test-mutex-printers.py: Likewise. ++ * nptl/test-mutexattr-printers.c: Likewise. ++ * nptl/test-mutexattr-printers.py: Likewise. ++ * nptl/test-rwlock-printers.c: Likewise. ++ * nptl/test-rwlock-printers.py: Likewise. ++ * nptl/test-rwlockattr-printers.c: Likewise. ++ * nptl/test-rwlockattr-printers.py: Likewise. ++ * scripts/gen-py-const.awk: Likewise. ++ * scripts/test_printers_common.py: Likewise. ++ * scripts/test_printers_exceptions.py: Likewise. ++ + 2016-08-09 Torvald Riegel <triegel@redhat.com> + + * include/atomic.h (atomic_fetch_and_relaxed, +diff --git a/INSTALL b/INSTALL +index ec3445f..dd62c86 100644 +--- a/INSTALL ++++ b/INSTALL +@@ -224,6 +224,33 @@ You can specify 'stop-on-test-failure=y' when running 'make check' to + make the test run stop and exit with an error status immediately when a + failure occurs. + ++ The GNU C Library pretty printers come with their own set of scripts ++for testing, which run together with the rest of the testsuite through ++'make check'. These scripts require the following tools to run ++successfully: ++ ++ * Python 2.7.6/3.4.3 or later ++ ++ Python is required for running the printers' test scripts. ++ ++ * PExpect 4.0 ++ ++ The printer tests drive GDB through test programs and compare its ++ output to the printers'. PExpect is used to capture the output of ++ GDB, and should be compatible with the Python version in your ++ system. ++ ++ * GDB 7.8 or later with support for Python 2.7.6/3.4.3 or later ++ ++ GDB itself needs to be configured with Python support in order to ++ use the pretty printers. Notice that your system having Python ++ available doesn't imply that GDB supports it, nor that your ++ system's Python and GDB's have the same version. ++ ++If these tools are absent, the printer tests will report themselves as ++'UNSUPPORTED'. Notice that some of the printer tests require the GNU C ++Library to be compiled with debugging symbols. ++ + To format the 'GNU C Library Reference Manual' for printing, type + 'make dvi'. You need a working TeX installation to do this. The + distribution builds the on-line formatted version of the manual, as Info +diff --git a/Makeconfig b/Makeconfig +index 03fd89c..2d92d94 100644 +--- a/Makeconfig ++++ b/Makeconfig +@@ -416,6 +416,11 @@ $(+link-pie-before-libc) $(rtld-tests-LDFLAGS) $(link-libc-tests) \ + $(+link-pie-after-libc) + $(call after-link,$@) + endef ++define +link-pie-printers-tests ++$(+link-pie-before-libc) $(built-rtld-LDFLAGS) $(link-libc-printers-tests) \ ++ $(+link-pie-after-libc) ++$(call after-link,$@) ++endef + endif + # Command for statically linking programs with the C library. + ifndef +link-static +@@ -445,7 +450,8 @@ ifeq (yes,$(build-pie-default)) + no-pie-ldflag = -no-pie + +link = $(+link-pie) + +link-tests = $(+link-pie-tests) +-else +++link-printers-tests = $(+link-pie-printers-tests) ++else # not build-pie-default + +link-before-libc = $(CC) -nostdlib -nostartfiles -o $@ \ + $(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \ + $(combreloc-LDFLAGS) $(relro-LDFLAGS) $(hashstyle-LDFLAGS) \ +@@ -466,51 +472,87 @@ $(+link-before-libc) $(rtld-tests-LDFLAGS) $(link-libc-tests) \ + $(+link-after-libc) + $(call after-link,$@) + endef +-endif +-else ++define +link-printers-tests ++$(+link-before-libc) $(built-rtld-LDFLAGS) $(link-libc-printers-tests) \ ++ $(+link-after-libc) ++$(call after-link,$@) ++endef ++endif # build-pie-default ++else # build-static + +link = $(+link-static) + +link-tests = $(+link-static-tests) +-endif +-endif +++link-printers-tests = $(+link-static-tests) ++endif # build-shared ++endif # +link ++ ++# The pretty printer test programs need to be compiled without optimizations ++# so they won't confuse gdb. We could use either the 'GCC optimize' pragma ++# or the 'optimize' function attribute to achieve this; however, at least on ++# ARM, gcc always produces different debugging symbols when invoked with ++# a -O greater than 0 than when invoked with -O0, regardless of anything else ++# we're using to suppress optimizations. Therefore, we need to explicitly pass ++# -O0 to it through CFLAGS. ++# Additionally, the build system will try to -include $(common-objpfx)/config.h ++# when compiling the tests, which will throw an error if some special macros ++# (such as __OPTIMIZE__ and IS_IN_build) aren't defined. To avoid this, we ++# tell gcc to define IS_IN_build. ++CFLAGS-printers-tests := -O0 -ggdb3 -DIS_IN_build ++ + ifeq (yes,$(build-shared)) ++# These indicate whether to link using the built ld.so or the installed one. ++installed-rtld-LDFLAGS = -Wl,-dynamic-linker=$(rtlddir)/$(rtld-installed-name) ++built-rtld-LDFLAGS = -Wl,-dynamic-linker=$(elf-objpfx)ld.so ++ + ifndef rtld-LDFLAGS +-rtld-LDFLAGS = -Wl,-dynamic-linker=$(rtlddir)/$(rtld-installed-name) ++rtld-LDFLAGS = $(installed-rtld-LDFLAGS) + endif ++ + ifndef rtld-tests-LDFLAGS + ifeq (yes,$(build-hardcoded-path-in-tests)) +-rtld-tests-LDFLAGS = -Wl,-dynamic-linker=$(elf-objpfx)ld.so ++rtld-tests-LDFLAGS = $(built-rtld-LDFLAGS) + else +-rtld-tests-LDFLAGS = $(rtld-LDFLAGS) +-endif +-endif +-endif ++rtld-tests-LDFLAGS = $(installed-rtld-LDFLAGS) ++endif # build-hardcoded-path-in-tests ++endif # rtld-tests-LDFLAGS ++ ++endif # build-shared ++ + ifndef link-libc + ifeq (yes,$(build-shared)) + # We need the versioned name of libc.so in the deps of $(others) et al + # so that the symlink to libc.so is created before anything tries to + # run the linked programs. ++link-libc-rpath = -Wl,-rpath=$(rpath-link) + link-libc-rpath-link = -Wl,-rpath-link=$(rpath-link) ++ + ifeq (yes,$(build-hardcoded-path-in-tests)) +-link-libc-tests-rpath-link = -Wl,-rpath=$(rpath-link) ++link-libc-tests-rpath-link = $(link-libc-rpath) + else + link-libc-tests-rpath-link = $(link-libc-rpath-link) +-endif ++endif # build-hardcoded-path-in-tests ++ + link-libc-before-gnulib = $(common-objpfx)libc.so$(libc.so-version) \ + $(common-objpfx)$(patsubst %,$(libtype.oS),c) \ + $(as-needed) $(elf-objpfx)ld.so \ + $(no-as-needed) + link-libc = $(link-libc-rpath-link) $(link-libc-before-gnulib) $(gnulib) ++ ++link-libc-tests-after-rpath-link = $(link-libc-before-gnulib) $(gnulib-tests) + link-libc-tests = $(link-libc-tests-rpath-link) \ +- $(link-libc-before-gnulib) $(gnulib-tests) ++ $(link-libc-tests-after-rpath-link) ++# Pretty printer test programs always require rpath instead of rpath-link. ++link-libc-printers-tests = $(link-libc-rpath) \ ++ $(link-libc-tests-after-rpath-link) ++ + # This is how to find at build-time things that will be installed there. + rpath-dirs = math elf dlfcn nss nis rt resolv crypt mathvec + rpath-link = \ + $(common-objdir):$(subst $(empty) ,:,$(patsubst ../$(subdir),.,$(rpath-dirs:%=$(common-objpfx)%))) +-else ++else # build-static + link-libc = $(common-objpfx)libc.a $(otherlibs) $(gnulib) $(common-objpfx)libc.a $(gnulib) + link-libc-tests = $(common-objpfx)libc.a $(otherlibs) $(gnulib-tests) $(common-objpfx)libc.a $(gnulib-tests) +-endif +-endif ++endif # build-shared ++endif # link-libc + + # Differences in the linkers on the various platforms. + LDFLAGS-rpath-ORIGIN = -Wl,-rpath,'$$ORIGIN' +diff --git a/Makerules b/Makerules +index be3c11b..b7e0f59 100644 +--- a/Makerules ++++ b/Makerules +@@ -214,6 +214,52 @@ sed-remove-dotdot := -e 's@ *\([^ \/$$][^ \]*\)@ $$(..)\1@g' \ + -e 's@^\([^ \/$$][^ \]*\)@$$(..)\1@g' + endif + ++ifdef gen-py-const-headers ++# We'll use a static pattern rule to match .pysym files with their ++# corresponding generated .py files. ++# The generated .py files go in the submodule's dir in the glibc build dir. ++py-const-files := $(patsubst %.pysym,%.py,$(gen-py-const-headers)) ++py-const-dir := $(objpfx) ++py-const := $(addprefix $(py-const-dir),$(py-const-files)) ++py-const-script := $(..)scripts/gen-py-const.awk ++ ++# This is a hack we use to generate .py files with constants for Python ++# pretty printers. It works the same way as gen-as-const. ++# See scripts/gen-py-const.awk for details on how the awk | gcc mechanism ++# works. ++# ++# $@.tmp and $@.tmp2 are temporary files we use to store the partial contents ++# of the target file. We do this instead of just writing on $@ because, if the ++# build process terminates prematurely, re-running Make wouldn't run this rule ++# since Make would see that the target file already exists (despite it being ++# incomplete). ++# ++# The sed line replaces "@name@SOME_NAME@value@SOME_VALUE@" strings from the ++# output of 'gcc -S' with "SOME_NAME = SOME_VALUE" strings. ++# The '-n' option, combined with the '/p' command, makes sed output only the ++# modified lines instead of the whole input file. The output is redirected ++# to a .py file; we'll import it in the pretty printers file to read ++# the constants generated by gen-py-const.awk. ++# The regex has two capturing groups, for SOME_NAME and SOME_VALUE ++# respectively. Notice SOME_VALUE may be prepended by a special character, ++# depending on the assembly syntax (e.g. immediates are prefixed by a '$' ++# in AT&T x86, and by a '#' in ARM). We discard it using a complemented set ++# before the second capturing group. ++$(py-const): $(py-const-dir)%.py: %.pysym $(py-const-script) \ ++ $(common-before-compile) ++ $(make-target-directory) ++ $(AWK) -f $(py-const-script) $< \ ++ | $(CC) -S -o $@.tmp $(CFLAGS) $(CPPFLAGS) -x c - ++ echo '# GENERATED FILE\n' > $@.tmp2 ++ echo '# Constant definitions for pretty printers.' >> $@.tmp2 ++ echo '# See gen-py-const.awk for details.\n' >> $@.tmp2 ++ sed -n -r 's/^.*@name@([^@]+)@value@[^[:xdigit:]Xx-]*([[:xdigit:]Xx-]+)@.*/\1 = \2/p' \ ++ $@.tmp >> $@.tmp2 ++ mv -f $@.tmp2 $@ ++ rm -f $@.tmp ++ ++generated += $(py-const) ++endif # gen-py-const-headers + + ifdef gen-as-const-headers + # Generating headers for assembly constants. +diff --git a/NEWS b/NEWS +index b0447e7..3002773 100644 +--- a/NEWS ++++ b/NEWS +@@ -5,6 +5,12 @@ See the end for copying conditions. + Please send GNU C library bug reports via <http://sourceware.org/bugzilla/> + using `glibc' in the "product" field. + ++ ++* GDB pretty printers have been added for mutex and condition variable ++ structures in POSIX Threads. When installed and loaded in gdb these pretty ++ printers show various pthread variables in human-readable form when read ++ using the 'print' or 'display' commands in gdb. ++ + Version 2.24 + + * The minimum Linux kernel version that this version of the GNU C Library +diff --git a/README.pretty-printers b/README.pretty-printers +new file mode 100644 +index 0000000..8662900 +--- /dev/null ++++ b/README.pretty-printers +@@ -0,0 +1,169 @@ ++README for the glibc Python pretty printers ++=========================================== ++ ++Pretty printers are gdb extensions that allow it to print useful, human-readable ++information about a program's variables. For example, for a pthread_mutex_t ++gdb would usually output something like this: ++ ++(gdb) print mutex ++$1 = { ++ __data = { ++ __lock = 22020096, ++ __count = 0, ++ __owner = 0, ++ __nusers = 0, ++ __kind = 576, ++ __spins = 0, ++ __elision = 0, ++ __list = { ++ __prev = 0x0, ++ __next = 0x0 ++ } ++ }, ++ __size = "\000\000P\001", '\000' <repeats 12 times>, "@\002", '\000' <repeats 21 times>, ++ __align = 22020096 ++} ++ ++However, with a pretty printer gdb will output something like this: ++ ++(gdb) print mutex ++$1 = pthread_mutex_t = { ++ Type = Normal, ++ Status = Unlocked, ++ Robust = No, ++ Shared = No, ++ Protocol = Priority protect, ++ Priority ceiling = 42 ++} ++ ++Before printing a value, gdb will first check if there's a pretty printer ++registered for it. If there is, it'll use it, otherwise it'll print the value ++as usual. Pretty printers can be registered in various ways; for our purposes ++we register them for the current objfile by calling ++gdb.printing.register_pretty_printer(). ++ ++Currently our printers are based on gdb.RegexpCollectionPrettyPrinter, which ++means they'll be triggered if the type of the variable we're printing matches ++a given regular expression. For example, MutexPrinter will be triggered if ++our variable's type matches the regexp '^pthread_mutex_t$'. ++ ++Besides the printers themselves, each module may have a constants file which the ++printers will import. These constants are generated from C headers during the ++build process, and need to be in the Python search path when loading the ++printers. ++ ++ ++Installing and loading ++---------------------- ++ ++The pretty printers and their constant files may be installed in different paths ++for each distro, though gdb should be able to automatically load them by itself. ++When in doubt, you can use the 'info pretty-printer' gdb command to list the ++loaded pretty printers. ++ ++If the printers aren't automatically loaded for some reason, you should add the ++following to your .gdbinit: ++ ++python ++import sys ++sys.path.insert(0, '/path/to/constants/file/directory') ++end ++ ++source /path/to/printers.py ++ ++If you're building glibc manually, '/path/to/constants/file/directory' should be ++'/path/to/glibc-build/submodule', where 'submodule' is e.g. nptl. ++ ++ ++Testing ++------- ++ ++The pretty printers come with a small test suite based on PExpect, which is a ++Python module with Expect-like features for spawning and controlling interactive ++programs. Each printer has a corresponding C program and a Python script ++that uses PExpect to drive gdb through the program and compare its output to ++the expected printer's. ++ ++The tests run on the glibc host, which is assumed to have both gdb and PExpect; ++if any of those is absent the tests will fail with code 77 (UNSUPPORTED). ++Native builds can be tested simply by doing 'make check'; cross builds must use ++cross-test-ssh.sh as test-wrapper, like this: ++ ++make test-wrapper='/path/to/scripts/cross-test-ssh.sh user@host' check ++ ++(Remember to share the build system's filesystem with the glibc host's through ++NFS or something similar). ++ ++Running 'make check' on a cross build will only compile the test programs, ++without running the scripts. ++ ++ ++Adding new pretty printers ++-------------------------- ++ ++Adding new pretty printers to glibc requires following these steps: ++ ++1. Identify which constants must be generated from C headers, and write the ++corresponding .pysym file. See scripts/gen-py-const.awk for more information ++on how this works. The name of the .pysym file must be added to the ++'gen-py-const-headers' variable in your submodule's Makefile (without the .pysym ++extension). ++ ++2. Write the pretty printer code itself. For this you can follow the gdb ++Python API documentation, and use the existing printers as examples. The printer ++code must import the generated constants file (which will have the same name ++as your .pysym file). The names of the pretty printer files must be added ++to the 'pretty-printers' variable in your submodule's Makefile (without the .py ++extension). ++ ++3. Write the unit tests for your pretty printers. The build system calls each ++test script passing it the paths to the test program source, the test program ++binary, and the printer files you added to 'pretty-printers' in the previous ++step. The test scripts, in turn, must import scripts/test_printers_common ++and call the init_test function passing it, among other things, the name of the ++set of pretty printers to enable (as seen by running 'info pretty-printer'). ++You can use the existing unit tests as examples. ++ ++4. Add the names of the pretty printer tests to the 'tests-printers' variable ++in your submodule's Makefile (without extensions). In addition, for each test ++program you must define a corresponding CFLAGS-* variable and set it to ++$(CFLAGS-printers-tests) to ensure they're compiled correctly. For example, ++test-foo-printer.c requires the following: ++ ++CFLAGS-test-foo-printer.c := $(CFLAGS-printers-tests) ++ ++Finally, if your programs need to be linked with a specific library, you can add ++its name to the 'tests-printers-libs' variable in your submodule's Makefile. ++ ++ ++Known issues ++------------ ++ ++* Pretty printers are inherently coupled to the code they're targetting, thus ++any changes to the target code must also update the corresponding printers. ++On the plus side, the printer code itself may serve as a kind of documentation ++for the target code. ++ ++* Older versions of the gdb Python API have a bug where ++gdb.RegexpCollectionPrettyPrinter would not be able to get a value's real type ++if it was typedef'd. This would cause gdb to ignore the pretty printers for ++types like pthread_mutex_t, which is defined as: ++ ++typedef union ++{ ++ ... ++} pthread_mutex_t; ++ ++This was fixed in commit 1b588015839caafc608a6944a78aea170f5fb2f6, and released ++as part of gdb 7.8. However, typedef'ing an already typedef'd type may cause ++a similar issue, e.g.: ++ ++typedef pthread_mutex_t mutex; ++mutex a_mutex; ++ ++Here, trying to print a_mutex won't trigger the pthread_mutex_t printer. ++ ++* The test programs must be compiled without optimizations. This is necessary ++because the test scripts rely on the C code structure being preserved when ++stepping through the programs. Things like aggressive instruction reordering ++or optimizing variables out may make this kind of testing impossible. +diff --git a/Rules b/Rules +index 8306d36..10a6479 100644 +--- a/Rules ++++ b/Rules +@@ -85,16 +85,27 @@ common-generated += dummy.o dummy.c + + .PHONY: others tests bench bench-build + ++# Test programs for the pretty printers. ++tests-printers-programs := $(addprefix $(objpfx),$(tests-printers)) ++ ++# .out files with the output of running the pretty printer tests. ++tests-printers-out := $(patsubst %,$(objpfx)%.out,$(tests-printers)) ++ + ifeq ($(build-programs),yes) + others: $(addprefix $(objpfx),$(others) $(sysdep-others) $(extra-objs)) + else + others: $(addprefix $(objpfx),$(extra-objs)) + endif ++ ++# Generate constant files for Python pretty printers if required. ++others: $(py-const) ++ + ifeq ($(run-built-tests),no) +-tests: $(addprefix $(objpfx),$(tests) $(test-srcs)) $(tests-special) ++tests: $(addprefix $(objpfx),$(tests) $(test-srcs)) $(tests-special) \ ++ $(tests-printers-programs) + xtests: tests $(xtests-special) + else +-tests: $(tests:%=$(objpfx)%.out) $(tests-special) ++tests: $(tests:%=$(objpfx)%.out) $(tests-special) $(tests-printers-out) + xtests: tests $(xtests:%=$(objpfx)%.out) $(xtests-special) + endif + +@@ -102,7 +113,8 @@ tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special)) + xtests-special-notdir = $(patsubst $(objpfx)%, %, $(xtests-special)) + tests: + $(..)scripts/merge-test-results.sh -s $(objpfx) $(subdir) \ +- $(sort $(tests) $(tests-special-notdir:.out=)) \ ++ $(sort $(tests) $(tests-special-notdir:.out=) \ ++ $(tests-printers)) \ + > $(objpfx)subdir-tests.sum + xtests: + $(..)scripts/merge-test-results.sh -s $(objpfx) $(subdir) \ +@@ -212,6 +224,32 @@ endif + + endif # tests + ++ifneq "$(strip $(tests-printers))" "" ++# We're defining this here for now; later it'll be defined at configure time ++# inside Makeconfig. ++PYTHON := python ++ ++# Static pattern rule for building the test programs for the pretty printers. ++$(tests-printers-programs): %: %.o $(tests-printers-libs) \ ++ $(sort $(filter $(common-objpfx)lib%,$(link-libc-static-tests))) \ ++ $(addprefix $(csu-objpfx),start.o) $(+preinit) $(+postinit) ++ $(+link-printers-tests) ++ ++# Add the paths to the generated constants file and test_common_printers.py ++# to PYTHONPATH so the test scripts can find them. ++py-env := PYTHONPATH=$(py-const-dir):$(..)scripts:$${PYTHONPATH} ++ ++# Static pattern rule that matches the test-* targets to their .c and .py ++# prerequisites. It'll run the corresponding test script for each test program ++# we compiled and place its output in the corresponding .out file. ++# The pretty printer files and test_common_printers.py must be present for all. ++$(tests-printers-out): $(objpfx)%.out: $(objpfx)% %.py %.c $(pretty-printers) \ ++ $(..)scripts/test_printers_common.py ++ $(test-wrapper-env) $(py-env) \ ++ $(PYTHON) $*.py $*.c $(objpfx)$* $(pretty-printers) > $@; \ ++ $(evaluate-test) ++endif ++ + + .PHONY: distclean realclean subdir_distclean subdir_realclean \ + subdir_clean subdir_mostlyclean subdir_testclean +diff --git a/manual/install.texi b/manual/install.texi +index 79ee45f..468479e 100644 +--- a/manual/install.texi ++++ b/manual/install.texi +@@ -256,6 +256,36 @@ occurred. You can specify @samp{stop-on-test-failure=y} when running + @code{make check} to make the test run stop and exit with an error + status immediately when a failure occurs. + ++The @glibcadj{} pretty printers come with their own set of scripts for testing, ++which run together with the rest of the testsuite through @code{make check}. ++These scripts require the following tools to run successfully: ++ ++@itemize @bullet ++@item ++Python 2.7.6/3.4.3 or later ++ ++Python is required for running the printers' test scripts. ++ ++@item PExpect 4.0 ++ ++The printer tests drive GDB through test programs and compare its output ++to the printers'. PExpect is used to capture the output of GDB, and should be ++compatible with the Python version in your system. ++ ++@item ++GDB 7.8 or later with support for Python 2.7.6/3.4.3 or later ++ ++GDB itself needs to be configured with Python support in order to use the ++pretty printers. Notice that your system having Python available doesn't imply ++that GDB supports it, nor that your system's Python and GDB's have the same ++version. ++@end itemize ++ ++@noindent ++If these tools are absent, the printer tests will report themselves as ++@code{UNSUPPORTED}. Notice that some of the printer tests require @theglibc{} ++to be compiled with debugging symbols. ++ + To format the @cite{GNU C Library Reference Manual} for printing, type + @w{@code{make dvi}}. You need a working @TeX{} installation to do + this. The distribution builds the on-line formatted version of the +diff --git a/nptl/Makefile b/nptl/Makefile +index 7dec4ed..49f6ba6 100644 +--- a/nptl/Makefile ++++ b/nptl/Makefile +@@ -308,6 +308,24 @@ gen-as-const-headers = pthread-errnos.sym \ + unwindbuf.sym \ + lowlevelrobustlock.sym pthread-pi-defines.sym + ++gen-py-const-headers := nptl_lock_constants.pysym ++pretty-printers := nptl-printers.py ++tests-printers := test-mutexattr-printers test-mutex-printers \ ++ test-condattr-printers test-cond-printers \ ++ test-rwlockattr-printers test-rwlock-printers ++ ++CFLAGS-test-mutexattr-printers.c := $(CFLAGS-printers-tests) ++CFLAGS-test-mutex-printers.c := $(CFLAGS-printers-tests) ++CFLAGS-test-condattr-printers.c := $(CFLAGS-printers-tests) ++CFLAGS-test-cond-printers.c := $(CFLAGS-printers-tests) ++CFLAGS-test-rwlockattr-printers.c := $(CFLAGS-printers-tests) ++CFLAGS-test-rwlock-printers.c := $(CFLAGS-printers-tests) ++ ++ifeq ($(build-shared),yes) ++tests-printers-libs := $(shared-thread-library) ++else ++tests-printers-libs := $(static-thread-library) ++endif + + LDFLAGS-pthread.so = -Wl,--enable-new-dtags,-z,nodelete,-z,initfirst + +diff --git a/nptl/nptl-printers.py b/nptl/nptl-printers.py +new file mode 100644 +index 0000000..e402f23 +--- /dev/null ++++ b/nptl/nptl-printers.py +@@ -0,0 +1,633 @@ ++# Pretty printers for the NPTL lock types. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++"""This file contains the gdb pretty printers for the following types: ++ ++ * pthread_mutex_t ++ * pthread_mutexattr_t ++ * pthread_cond_t ++ * pthread_condattr_t ++ * pthread_rwlock_t ++ * pthread_rwlockattr_t ++ ++You can check which printers are registered and enabled by issuing the ++'info pretty-printer' gdb command. Printers should trigger automatically when ++trying to print a variable of one of the types mentioned above. ++""" ++ ++from __future__ import print_function ++ ++import gdb ++import gdb.printing ++from nptl_lock_constants import * ++ ++MUTEX_TYPES = { ++ PTHREAD_MUTEX_NORMAL: ('Type', 'Normal'), ++ PTHREAD_MUTEX_RECURSIVE: ('Type', 'Recursive'), ++ PTHREAD_MUTEX_ERRORCHECK: ('Type', 'Error check'), ++ PTHREAD_MUTEX_ADAPTIVE_NP: ('Type', 'Adaptive') ++} ++ ++class MutexPrinter(object): ++ """Pretty printer for pthread_mutex_t.""" ++ ++ def __init__(self, mutex): ++ """Initialize the printer's internal data structures. ++ ++ Args: ++ mutex: A gdb.value representing a pthread_mutex_t. ++ """ ++ ++ data = mutex['__data'] ++ self.lock = data['__lock'] ++ self.count = data['__count'] ++ self.owner = data['__owner'] ++ self.kind = data['__kind'] ++ self.values = [] ++ self.read_values() ++ ++ def to_string(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_mutex_t. ++ """ ++ ++ return 'pthread_mutex_t' ++ ++ def children(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_mutex_t. ++ """ ++ ++ return self.values ++ ++ def read_values(self): ++ """Read the mutex's info and store it in self.values. ++ ++ The data contained in self.values will be returned by the Iterator ++ created in self.children. ++ """ ++ ++ self.read_type() ++ self.read_status() ++ self.read_attributes() ++ self.read_misc_info() ++ ++ def read_type(self): ++ """Read the mutex's type.""" ++ ++ mutex_type = self.kind & PTHREAD_MUTEX_KIND_MASK ++ ++ # mutex_type must be casted to int because it's a gdb.Value ++ self.values.append(MUTEX_TYPES[int(mutex_type)]) ++ ++ def read_status(self): ++ """Read the mutex's status. ++ ++ For architectures which support lock elision, this method reads ++ whether the mutex appears as locked in memory (i.e. it may show it as ++ unlocked even after calling pthread_mutex_lock). ++ """ ++ ++ if self.kind == PTHREAD_MUTEX_DESTROYED: ++ self.values.append(('Status', 'Destroyed')) ++ elif self.kind & PTHREAD_MUTEX_ROBUST_NORMAL_NP: ++ self.read_status_robust() ++ else: ++ self.read_status_no_robust() ++ ++ def read_status_robust(self): ++ """Read the status of a robust mutex. ++ ++ In glibc robust mutexes are implemented in a very different way than ++ non-robust ones. This method reads their locking status, ++ whether it may have waiters, their registered owner (if any), ++ whether the owner is alive or not, and the status of the state ++ they're protecting. ++ """ ++ ++ if self.lock == PTHREAD_MUTEX_UNLOCKED: ++ self.values.append(('Status', 'Unlocked')) ++ else: ++ if self.lock & FUTEX_WAITERS: ++ self.values.append(('Status', 'Locked, possibly with waiters')) ++ else: ++ self.values.append(('Status', ++ 'Locked, possibly with no waiters')) ++ ++ if self.lock & FUTEX_OWNER_DIED: ++ self.values.append(('Owner ID', '%d (dead)' % self.owner)) ++ else: ++ self.values.append(('Owner ID', self.lock & FUTEX_TID_MASK)) ++ ++ if self.owner == PTHREAD_MUTEX_INCONSISTENT: ++ self.values.append(('State protected by this mutex', ++ 'Inconsistent')) ++ elif self.owner == PTHREAD_MUTEX_NOTRECOVERABLE: ++ self.values.append(('State protected by this mutex', ++ 'Not recoverable')) ++ ++ def read_status_no_robust(self): ++ """Read the status of a non-robust mutex. ++ ++ Read info on whether the mutex is locked, if it may have waiters ++ and its owner (if any). ++ """ ++ ++ lock_value = self.lock ++ ++ if self.kind & PTHREAD_MUTEX_PRIO_PROTECT_NP: ++ lock_value &= ~(PTHREAD_MUTEX_PRIO_CEILING_MASK) ++ ++ if lock_value == PTHREAD_MUTEX_UNLOCKED: ++ self.values.append(('Status', 'Unlocked')) ++ else: ++ if self.kind & PTHREAD_MUTEX_PRIO_INHERIT_NP: ++ waiters = self.lock & FUTEX_WAITERS ++ owner = self.lock & FUTEX_TID_MASK ++ else: ++ # Mutex protocol is PP or none ++ waiters = (self.lock != PTHREAD_MUTEX_LOCKED_NO_WAITERS) ++ owner = self.owner ++ ++ if waiters: ++ self.values.append(('Status', 'Locked, possibly with waiters')) ++ else: ++ self.values.append(('Status', ++ 'Locked, possibly with no waiters')) ++ ++ self.values.append(('Owner ID', owner)) ++ ++ def read_attributes(self): ++ """Read the mutex's attributes.""" ++ ++ if self.kind != PTHREAD_MUTEX_DESTROYED: ++ if self.kind & PTHREAD_MUTEX_ROBUST_NORMAL_NP: ++ self.values.append(('Robust', 'Yes')) ++ else: ++ self.values.append(('Robust', 'No')) ++ ++ # In glibc, robust mutexes always have their pshared flag set to ++ # 'shared' regardless of what the pshared flag of their ++ # mutexattr was. Therefore a robust mutex will act as shared ++ # even if it was initialized with a 'private' mutexattr. ++ if self.kind & PTHREAD_MUTEX_PSHARED_BIT: ++ self.values.append(('Shared', 'Yes')) ++ else: ++ self.values.append(('Shared', 'No')) ++ ++ if self.kind & PTHREAD_MUTEX_PRIO_INHERIT_NP: ++ self.values.append(('Protocol', 'Priority inherit')) ++ elif self.kind & PTHREAD_MUTEX_PRIO_PROTECT_NP: ++ prio_ceiling = ((self.lock & PTHREAD_MUTEX_PRIO_CEILING_MASK) ++ >> PTHREAD_MUTEX_PRIO_CEILING_SHIFT) ++ ++ self.values.append(('Protocol', 'Priority protect')) ++ self.values.append(('Priority ceiling', prio_ceiling)) ++ else: ++ # PTHREAD_PRIO_NONE ++ self.values.append(('Protocol', 'None')) ++ ++ def read_misc_info(self): ++ """Read miscellaneous info on the mutex. ++ ++ For now this reads the number of times a recursive mutex was locked ++ by the same thread. ++ """ ++ ++ mutex_type = self.kind & PTHREAD_MUTEX_KIND_MASK ++ ++ if mutex_type == PTHREAD_MUTEX_RECURSIVE and self.count > 1: ++ self.values.append(('Times locked recursively', self.count)) ++ ++class MutexAttributesPrinter(object): ++ """Pretty printer for pthread_mutexattr_t. ++ ++ In the NPTL this is a type that's always casted to struct pthread_mutexattr ++ which has a single 'mutexkind' field containing the actual attributes. ++ """ ++ ++ def __init__(self, mutexattr): ++ """Initialize the printer's internal data structures. ++ ++ Args: ++ mutexattr: A gdb.value representing a pthread_mutexattr_t. ++ """ ++ ++ self.values = [] ++ ++ try: ++ mutexattr_struct = gdb.lookup_type('struct pthread_mutexattr') ++ self.mutexattr = mutexattr.cast(mutexattr_struct)['mutexkind'] ++ self.read_values() ++ except gdb.error: ++ # libpthread doesn't have debug symbols, thus we can't find the ++ # real struct type. Just print the union members. ++ self.values.append(('__size', mutexattr['__size'])) ++ self.values.append(('__align', mutexattr['__align'])) ++ ++ def to_string(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_mutexattr_t. ++ """ ++ ++ return 'pthread_mutexattr_t' ++ ++ def children(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_mutexattr_t. ++ """ ++ ++ return self.values ++ ++ def read_values(self): ++ """Read the mutexattr's info and store it in self.values. ++ ++ The data contained in self.values will be returned by the Iterator ++ created in self.children. ++ """ ++ ++ mutexattr_type = (self.mutexattr ++ & ~PTHREAD_MUTEXATTR_FLAG_BITS ++ & ~PTHREAD_MUTEX_NO_ELISION_NP) ++ ++ # mutexattr_type must be casted to int because it's a gdb.Value ++ self.values.append(MUTEX_TYPES[int(mutexattr_type)]) ++ ++ if self.mutexattr & PTHREAD_MUTEXATTR_FLAG_ROBUST: ++ self.values.append(('Robust', 'Yes')) ++ else: ++ self.values.append(('Robust', 'No')) ++ ++ if self.mutexattr & PTHREAD_MUTEXATTR_FLAG_PSHARED: ++ self.values.append(('Shared', 'Yes')) ++ else: ++ self.values.append(('Shared', 'No')) ++ ++ protocol = ((self.mutexattr & PTHREAD_MUTEXATTR_PROTOCOL_MASK) >> ++ PTHREAD_MUTEXATTR_PROTOCOL_SHIFT) ++ ++ if protocol == PTHREAD_PRIO_NONE: ++ self.values.append(('Protocol', 'None')) ++ elif protocol == PTHREAD_PRIO_INHERIT: ++ self.values.append(('Protocol', 'Priority inherit')) ++ elif protocol == PTHREAD_PRIO_PROTECT: ++ self.values.append(('Protocol', 'Priority protect')) ++ ++CLOCK_IDS = { ++ CLOCK_REALTIME: 'CLOCK_REALTIME', ++ CLOCK_MONOTONIC: 'CLOCK_MONOTONIC', ++ CLOCK_PROCESS_CPUTIME_ID: 'CLOCK_PROCESS_CPUTIME_ID', ++ CLOCK_THREAD_CPUTIME_ID: 'CLOCK_THREAD_CPUTIME_ID', ++ CLOCK_MONOTONIC_RAW: 'CLOCK_MONOTONIC_RAW', ++ CLOCK_REALTIME_COARSE: 'CLOCK_REALTIME_COARSE', ++ CLOCK_MONOTONIC_COARSE: 'CLOCK_MONOTONIC_COARSE' ++} ++ ++class ConditionVariablePrinter(object): ++ """Pretty printer for pthread_cond_t.""" ++ ++ def __init__(self, cond): ++ """Initialize the printer's internal data structures. ++ ++ Args: ++ cond: A gdb.value representing a pthread_cond_t. ++ """ ++ ++ # Since PTHREAD_COND_SHARED is an integer, we need to cast it to void * ++ # to be able to compare it to the condvar's __data.__mutex member. ++ # ++ # While it looks like self.shared_value should be a class variable, ++ # that would result in it having an incorrect size if we're loading ++ # these printers through .gdbinit for a 64-bit objfile in AMD64. ++ # This is because gdb initially assumes the pointer size to be 4 bytes, ++ # and only sets it to 8 after loading the 64-bit objfiles. Since ++ # .gdbinit runs before any objfiles are loaded, this would effectively ++ # make self.shared_value have a size of 4, thus breaking later ++ # comparisons with pointers whose types are looked up at runtime. ++ void_ptr_type = gdb.lookup_type('void').pointer() ++ self.shared_value = gdb.Value(PTHREAD_COND_SHARED).cast(void_ptr_type) ++ ++ data = cond['__data'] ++ self.total_seq = data['__total_seq'] ++ self.mutex = data['__mutex'] ++ self.nwaiters = data['__nwaiters'] ++ self.values = [] ++ ++ self.read_values() ++ ++ def to_string(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_cond_t. ++ """ ++ ++ return 'pthread_cond_t' ++ ++ def children(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_cond_t. ++ """ ++ ++ return self.values ++ ++ def read_values(self): ++ """Read the condvar's info and store it in self.values. ++ ++ The data contained in self.values will be returned by the Iterator ++ created in self.children. ++ """ ++ ++ self.read_status() ++ self.read_attributes() ++ self.read_mutex_info() ++ ++ def read_status(self): ++ """Read the status of the condvar. ++ ++ This method reads whether the condvar is destroyed and how many threads ++ are waiting for it. ++ """ ++ ++ if self.total_seq == PTHREAD_COND_DESTROYED: ++ self.values.append(('Status', 'Destroyed')) ++ ++ self.values.append(('Threads waiting for this condvar', ++ self.nwaiters >> COND_NWAITERS_SHIFT)) ++ ++ def read_attributes(self): ++ """Read the condvar's attributes.""" ++ ++ clock_id = self.nwaiters & ((1 << COND_NWAITERS_SHIFT) - 1) ++ ++ # clock_id must be casted to int because it's a gdb.Value ++ self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)])) ++ ++ shared = (self.mutex == self.shared_value) ++ ++ if shared: ++ self.values.append(('Shared', 'Yes')) ++ else: ++ self.values.append(('Shared', 'No')) ++ ++ def read_mutex_info(self): ++ """Read the data of the mutex this condvar is bound to. ++ ++ A pthread_cond_t's __data.__mutex member is a void * which ++ must be casted to pthread_mutex_t *. For shared condvars, this ++ member isn't recorded and has a special value instead. ++ """ ++ ++ if self.mutex and self.mutex != self.shared_value: ++ mutex_type = gdb.lookup_type('pthread_mutex_t') ++ mutex = self.mutex.cast(mutex_type.pointer()).dereference() ++ ++ self.values.append(('Mutex', mutex)) ++ ++class ConditionVariableAttributesPrinter(object): ++ """Pretty printer for pthread_condattr_t. ++ ++ In the NPTL this is a type that's always casted to struct pthread_condattr, ++ which has a single 'value' field containing the actual attributes. ++ """ ++ ++ def __init__(self, condattr): ++ """Initialize the printer's internal data structures. ++ ++ Args: ++ condattr: A gdb.value representing a pthread_condattr_t. ++ """ ++ ++ self.values = [] ++ ++ try: ++ condattr_struct = gdb.lookup_type('struct pthread_condattr') ++ self.condattr = condattr.cast(condattr_struct)['value'] ++ self.read_values() ++ except gdb.error: ++ # libpthread doesn't have debug symbols, thus we can't find the ++ # real struct type. Just print the union members. ++ self.values.append(('__size', condattr['__size'])) ++ self.values.append(('__align', condattr['__align'])) ++ ++ def to_string(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_condattr_t. ++ """ ++ ++ return 'pthread_condattr_t' ++ ++ def children(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_condattr_t. ++ """ ++ ++ return self.values ++ ++ def read_values(self): ++ """Read the condattr's info and store it in self.values. ++ ++ The data contained in self.values will be returned by the Iterator ++ created in self.children. ++ """ ++ ++ clock_id = self.condattr & ((1 << COND_NWAITERS_SHIFT) - 1) ++ ++ # clock_id must be casted to int because it's a gdb.Value ++ self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)])) ++ ++ if self.condattr & 1: ++ self.values.append(('Shared', 'Yes')) ++ else: ++ self.values.append(('Shared', 'No')) ++ ++class RWLockPrinter(object): ++ """Pretty printer for pthread_rwlock_t.""" ++ ++ def __init__(self, rwlock): ++ """Initialize the printer's internal data structures. ++ ++ Args: ++ rwlock: A gdb.value representing a pthread_rwlock_t. ++ """ ++ ++ data = rwlock['__data'] ++ self.readers = data['__nr_readers'] ++ self.queued_readers = data['__nr_readers_queued'] ++ self.queued_writers = data['__nr_writers_queued'] ++ self.writer_id = data['__writer'] ++ self.shared = data['__shared'] ++ self.prefers_writers = data['__flags'] ++ self.values = [] ++ self.read_values() ++ ++ def to_string(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_rwlock_t. ++ """ ++ ++ return 'pthread_rwlock_t' ++ ++ def children(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_rwlock_t. ++ """ ++ ++ return self.values ++ ++ def read_values(self): ++ """Read the rwlock's info and store it in self.values. ++ ++ The data contained in self.values will be returned by the Iterator ++ created in self.children. ++ """ ++ ++ self.read_status() ++ self.read_attributes() ++ ++ def read_status(self): ++ """Read the status of the rwlock.""" ++ ++ # Right now pthread_rwlock_destroy doesn't do anything, so there's no ++ # way to check if an rwlock is destroyed. ++ ++ if self.writer_id: ++ self.values.append(('Status', 'Locked (Write)')) ++ self.values.append(('Writer ID', self.writer_id)) ++ elif self.readers: ++ self.values.append(('Status', 'Locked (Read)')) ++ self.values.append(('Readers', self.readers)) ++ else: ++ self.values.append(('Status', 'Unlocked')) ++ ++ self.values.append(('Queued readers', self.queued_readers)) ++ self.values.append(('Queued writers', self.queued_writers)) ++ ++ def read_attributes(self): ++ """Read the attributes of the rwlock.""" ++ ++ if self.shared: ++ self.values.append(('Shared', 'Yes')) ++ else: ++ self.values.append(('Shared', 'No')) ++ ++ if self.prefers_writers: ++ self.values.append(('Prefers', 'Writers')) ++ else: ++ self.values.append(('Prefers', 'Readers')) ++ ++class RWLockAttributesPrinter(object): ++ """Pretty printer for pthread_rwlockattr_t. ++ ++ In the NPTL this is a type that's always casted to ++ struct pthread_rwlockattr, which has two fields ('lockkind' and 'pshared') ++ containing the actual attributes. ++ """ ++ ++ def __init__(self, rwlockattr): ++ """Initialize the printer's internal data structures. ++ ++ Args: ++ rwlockattr: A gdb.value representing a pthread_rwlockattr_t. ++ """ ++ ++ self.values = [] ++ ++ try: ++ rwlockattr_struct = gdb.lookup_type('struct pthread_rwlockattr') ++ self.rwlockattr = rwlockattr.cast(rwlockattr_struct) ++ self.read_values() ++ except gdb.error: ++ # libpthread doesn't have debug symbols, thus we can't find the ++ # real struct type. Just print the union members. ++ self.values.append(('__size', rwlockattr['__size'])) ++ self.values.append(('__align', rwlockattr['__align'])) ++ ++ def to_string(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_rwlockattr_t. ++ """ ++ ++ return 'pthread_rwlockattr_t' ++ ++ def children(self): ++ """gdb API function. ++ ++ This is called from gdb when we try to print a pthread_rwlockattr_t. ++ """ ++ ++ return self.values ++ ++ def read_values(self): ++ """Read the rwlockattr's info and store it in self.values. ++ ++ The data contained in self.values will be returned by the Iterator ++ created in self.children. ++ """ ++ ++ rwlock_type = self.rwlockattr['lockkind'] ++ shared = self.rwlockattr['pshared'] ++ ++ if shared == PTHREAD_PROCESS_SHARED: ++ self.values.append(('Shared', 'Yes')) ++ else: ++ # PTHREAD_PROCESS_PRIVATE ++ self.values.append(('Shared', 'No')) ++ ++ if (rwlock_type == PTHREAD_RWLOCK_PREFER_READER_NP or ++ rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NP): ++ # This is a known bug. Using PTHREAD_RWLOCK_PREFER_WRITER_NP will ++ # still make the rwlock prefer readers. ++ self.values.append(('Prefers', 'Readers')) ++ elif rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP: ++ self.values.append(('Prefers', 'Writers')) ++ ++def register(objfile): ++ """Register the pretty printers within the given objfile.""" ++ ++ printer = gdb.printing.RegexpCollectionPrettyPrinter('glibc-pthread-locks') ++ ++ printer.add_printer('pthread_mutex_t', r'^pthread_mutex_t$', ++ MutexPrinter) ++ printer.add_printer('pthread_mutexattr_t', r'^pthread_mutexattr_t$', ++ MutexAttributesPrinter) ++ printer.add_printer('pthread_cond_t', r'^pthread_cond_t$', ++ ConditionVariablePrinter) ++ printer.add_printer('pthread_condattr_t', r'^pthread_condattr_t$', ++ ConditionVariableAttributesPrinter) ++ printer.add_printer('pthread_rwlock_t', r'^pthread_rwlock_t$', ++ RWLockPrinter) ++ printer.add_printer('pthread_rwlockattr_t', r'^pthread_rwlockattr_t$', ++ RWLockAttributesPrinter) ++ ++ if objfile == None: ++ objfile = gdb ++ ++ gdb.printing.register_pretty_printer(objfile, printer) ++ ++register(gdb.current_objfile()) +diff --git a/nptl/nptl_lock_constants.pysym b/nptl/nptl_lock_constants.pysym +new file mode 100644 +index 0000000..303ec61 +--- /dev/null ++++ b/nptl/nptl_lock_constants.pysym +@@ -0,0 +1,75 @@ ++#include <pthreadP.h> ++ ++-- Mutex types ++PTHREAD_MUTEX_KIND_MASK PTHREAD_MUTEX_KIND_MASK_NP ++PTHREAD_MUTEX_NORMAL ++PTHREAD_MUTEX_RECURSIVE PTHREAD_MUTEX_RECURSIVE_NP ++PTHREAD_MUTEX_ERRORCHECK PTHREAD_MUTEX_ERRORCHECK_NP ++PTHREAD_MUTEX_ADAPTIVE_NP ++ ++-- Mutex status ++-- These are hardcoded all over the code; there are no enums/macros for them. ++PTHREAD_MUTEX_DESTROYED -1 ++PTHREAD_MUTEX_UNLOCKED 0 ++PTHREAD_MUTEX_LOCKED_NO_WAITERS 1 ++ ++-- For robust mutexes ++PTHREAD_MUTEX_INCONSISTENT ++PTHREAD_MUTEX_NOTRECOVERABLE ++FUTEX_OWNER_DIED ++ ++-- For robust and PI mutexes ++FUTEX_WAITERS ++FUTEX_TID_MASK ++ ++-- Mutex attributes ++PTHREAD_MUTEX_ROBUST_NORMAL_NP ++PTHREAD_MUTEX_PRIO_INHERIT_NP ++PTHREAD_MUTEX_PRIO_PROTECT_NP ++PTHREAD_MUTEX_PSHARED_BIT ++PTHREAD_MUTEX_PRIO_CEILING_SHIFT ++PTHREAD_MUTEX_PRIO_CEILING_MASK ++ ++-- Mutex attribute flags ++PTHREAD_MUTEXATTR_PROTOCOL_SHIFT ++PTHREAD_MUTEXATTR_PROTOCOL_MASK ++PTHREAD_MUTEXATTR_PRIO_CEILING_MASK ++PTHREAD_MUTEXATTR_FLAG_ROBUST ++PTHREAD_MUTEXATTR_FLAG_PSHARED ++PTHREAD_MUTEXATTR_FLAG_BITS ++PTHREAD_MUTEX_NO_ELISION_NP ++ ++-- Priority protocols ++PTHREAD_PRIO_NONE ++PTHREAD_PRIO_INHERIT ++PTHREAD_PRIO_PROTECT ++ ++-- These values are hardcoded as well: ++-- Value of __mutex for shared condvars. ++PTHREAD_COND_SHARED (void *)~0l ++ ++-- Value of __total_seq for destroyed condvars. ++PTHREAD_COND_DESTROYED -1ull ++ ++-- __nwaiters encodes the number of threads waiting on a condvar ++-- and the clock ID. ++-- __nwaiters >> COND_NWAITERS_SHIFT gives us the number of waiters. ++COND_NWAITERS_SHIFT ++ ++-- Condvar clock IDs ++CLOCK_REALTIME ++CLOCK_MONOTONIC ++CLOCK_PROCESS_CPUTIME_ID ++CLOCK_THREAD_CPUTIME_ID ++CLOCK_MONOTONIC_RAW ++CLOCK_REALTIME_COARSE ++CLOCK_MONOTONIC_COARSE ++ ++-- Rwlock attributes ++PTHREAD_RWLOCK_PREFER_READER_NP ++PTHREAD_RWLOCK_PREFER_WRITER_NP ++PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP ++ ++-- 'Shared' attribute values ++PTHREAD_PROCESS_PRIVATE ++PTHREAD_PROCESS_SHARED +diff --git a/nptl/test-cond-printers.c b/nptl/test-cond-printers.c +new file mode 100644 +index 0000000..0f2a5f4 +--- /dev/null ++++ b/nptl/test-cond-printers.c +@@ -0,0 +1,57 @@ ++/* Helper program for testing the pthread_cond_t pretty printer. ++ ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++/* Keep the calls to the pthread_* functions on separate lines to make it easy ++ to advance through the program using the gdb 'next' command. */ ++ ++#include <time.h> ++#include <pthread.h> ++ ++#define PASS 0 ++#define FAIL 1 ++ ++static int test_status_destroyed (pthread_cond_t *condvar); ++ ++int ++main (void) ++{ ++ pthread_cond_t condvar; ++ pthread_condattr_t attr; ++ int result = FAIL; ++ ++ if (pthread_condattr_init (&attr) == 0 ++ && test_status_destroyed (&condvar) == PASS) ++ result = PASS; ++ /* Else, one of the pthread_cond* functions failed. */ ++ ++ return result; ++} ++ ++/* Initializes CONDVAR, then destroys it. */ ++static int ++test_status_destroyed (pthread_cond_t *condvar) ++{ ++ int result = FAIL; ++ ++ if (pthread_cond_init (condvar, NULL) == 0 ++ && pthread_cond_destroy (condvar) == 0) ++ result = PASS; /* Test status (destroyed). */ ++ ++ return result; ++} +diff --git a/nptl/test-cond-printers.py b/nptl/test-cond-printers.py +new file mode 100644 +index 0000000..af0e12e +--- /dev/null ++++ b/nptl/test-cond-printers.py +@@ -0,0 +1,50 @@ ++# Common tests for the ConditionVariablePrinter class. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++import sys ++ ++from test_printers_common import * ++ ++test_source = sys.argv[1] ++test_bin = sys.argv[2] ++printer_files = sys.argv[3:] ++printer_names = ['global glibc-pthread-locks'] ++ ++try: ++ init_test(test_bin, printer_files, printer_names) ++ go_to_main() ++ ++ var = 'condvar' ++ to_string = 'pthread_cond_t' ++ ++ break_at(test_source, 'Test status (destroyed)') ++ continue_cmd() # Go to test_status_destroyed ++ test_printer(var, to_string, {'Status': 'Destroyed'}) ++ ++ continue_cmd() # Exit ++ ++except (NoLineError, pexpect.TIMEOUT) as exception: ++ print('Error: {0}'.format(exception)) ++ result = FAIL ++ ++else: ++ print('Test succeeded.') ++ result = PASS ++ ++exit(result) +diff --git a/nptl/test-condattr-printers.c b/nptl/test-condattr-printers.c +new file mode 100644 +index 0000000..4db4098 +--- /dev/null ++++ b/nptl/test-condattr-printers.c +@@ -0,0 +1,94 @@ ++/* Helper program for testing the pthread_cond_t and pthread_condattr_t ++ pretty printers. ++ ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++/* Keep the calls to the pthread_* functions on separate lines to make it easy ++ to advance through the program using the gdb 'next' command. */ ++ ++#include <time.h> ++#include <pthread.h> ++ ++#define PASS 0 ++#define FAIL 1 ++ ++static int condvar_reinit (pthread_cond_t *condvar, ++ const pthread_condattr_t *attr); ++static int test_setclock (pthread_cond_t *condvar, pthread_condattr_t *attr); ++static int test_setpshared (pthread_cond_t *condvar, pthread_condattr_t *attr); ++ ++/* Need these so we don't have lines longer than 79 chars. */ ++#define SET_SHARED(attr, shared) pthread_condattr_setpshared (attr, shared) ++ ++int ++main (void) ++{ ++ pthread_cond_t condvar; ++ pthread_condattr_t attr; ++ int result = FAIL; ++ ++ if (pthread_condattr_init (&attr) == 0 ++ && pthread_cond_init (&condvar, NULL) == 0 ++ && test_setclock (&condvar, &attr) == PASS ++ && test_setpshared (&condvar, &attr) == PASS) ++ result = PASS; ++ /* Else, one of the pthread_cond* functions failed. */ ++ ++ return result; ++} ++ ++/* Destroys CONDVAR and re-initializes it using ATTR. */ ++static int ++condvar_reinit (pthread_cond_t *condvar, const pthread_condattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_cond_destroy (condvar) == 0 ++ && pthread_cond_init (condvar, attr) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting the clock ID attribute. */ ++static int ++test_setclock (pthread_cond_t *condvar, pthread_condattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_condattr_setclock (attr, CLOCK_REALTIME) == 0 /* Set clock. */ ++ && condvar_reinit (condvar, attr) == PASS) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting whether the condvar can be shared between processes. */ ++static int ++test_setpshared (pthread_cond_t *condvar, pthread_condattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared. */ ++ && condvar_reinit (condvar, attr) == PASS ++ && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0 ++ && condvar_reinit (condvar, attr) == PASS) ++ result = PASS; ++ ++ return result; ++} +diff --git a/nptl/test-condattr-printers.py b/nptl/test-condattr-printers.py +new file mode 100644 +index 0000000..7ea01db +--- /dev/null ++++ b/nptl/test-condattr-printers.py +@@ -0,0 +1,71 @@ ++# Common tests for the ConditionVariablePrinter and ++# ConditionVariableAttributesPrinter classes. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++import sys ++ ++from test_printers_common import * ++ ++test_source = sys.argv[1] ++test_bin = sys.argv[2] ++printer_files = sys.argv[3:] ++printer_names = ['global glibc-pthread-locks'] ++ ++try: ++ init_test(test_bin, printer_files, printer_names) ++ go_to_main() ++ ++ check_debug_symbol('struct pthread_condattr') ++ ++ condvar_var = 'condvar' ++ condvar_to_string = 'pthread_cond_t' ++ ++ attr_var = 'attr' ++ attr_to_string = 'pthread_condattr_t' ++ ++ break_at(test_source, 'Set clock') ++ continue_cmd() # Go to test_setclock ++ next_cmd(2) ++ test_printer(condvar_var, condvar_to_string, {'Clock ID': 'CLOCK_REALTIME'}) ++ test_printer(attr_var, attr_to_string, {'Clock ID': 'CLOCK_REALTIME'}) ++ ++ break_at(test_source, 'Set shared') ++ continue_cmd() # Go to test_setpshared ++ next_cmd(2) ++ test_printer(condvar_var, condvar_to_string, {'Shared': 'Yes'}) ++ test_printer(attr_var, attr_to_string, {'Shared': 'Yes'}) ++ next_cmd(2) ++ test_printer(condvar_var, condvar_to_string, {'Shared': 'No'}) ++ test_printer(attr_var, attr_to_string, {'Shared': 'No'}) ++ ++ continue_cmd() # Exit ++ ++except (NoLineError, pexpect.TIMEOUT) as exception: ++ print('Error: {0}'.format(exception)) ++ result = FAIL ++ ++except DebugError as exception: ++ print(exception) ++ result = UNSUPPORTED ++ ++else: ++ print('Test succeeded.') ++ result = PASS ++ ++exit(result) +diff --git a/nptl/test-mutex-printers.c b/nptl/test-mutex-printers.c +new file mode 100644 +index 0000000..b973e82 +--- /dev/null ++++ b/nptl/test-mutex-printers.c +@@ -0,0 +1,151 @@ ++/* Helper program for testing the pthread_mutex_t pretty printer. ++ ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++/* Keep the calls to the pthread_* functions on separate lines to make it easy ++ to advance through the program using the gdb 'next' command. */ ++ ++#include <stdlib.h> ++#include <errno.h> ++#include <pthread.h> ++ ++#define PASS 0 ++#define FAIL 1 ++ ++static int test_status_destroyed (pthread_mutex_t *mutex); ++static int test_status_no_robust (pthread_mutex_t *mutex, ++ pthread_mutexattr_t *attr); ++static int test_status_robust (pthread_mutex_t *mutex, ++ pthread_mutexattr_t *attr); ++static int test_locking_state_robust (pthread_mutex_t *mutex); ++static void *thread_func (void *arg); ++static int test_recursive_locks (pthread_mutex_t *mutex, ++ pthread_mutexattr_t *attr); ++ ++int ++main (void) ++{ ++ pthread_mutex_t mutex; ++ pthread_mutexattr_t attr; ++ int result = FAIL; ++ ++ if (pthread_mutexattr_init (&attr) == 0 ++ && test_status_destroyed (&mutex) == PASS ++ && test_status_no_robust (&mutex, &attr) == PASS ++ && test_status_robust (&mutex, &attr) == PASS ++ && test_recursive_locks (&mutex, &attr) == PASS) ++ result = PASS; ++ /* Else, one of the pthread_mutex* functions failed. */ ++ ++ return result; ++} ++ ++/* Initializes MUTEX, then destroys it. */ ++static int ++test_status_destroyed (pthread_mutex_t *mutex) ++{ ++ int result = FAIL; ++ ++ if (pthread_mutex_init (mutex, NULL) == 0 ++ && pthread_mutex_destroy (mutex) == 0) ++ result = PASS; /* Test status (destroyed). */ ++ ++ return result; ++} ++ ++/* Tests locking of non-robust mutexes. */ ++static int ++test_status_no_robust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_mutexattr_setrobust (attr, PTHREAD_MUTEX_STALLED) == 0 ++ && pthread_mutex_init (mutex, attr) == 0 ++ && pthread_mutex_lock (mutex) == 0 /* Test status (non-robust). */ ++ && pthread_mutex_unlock (mutex) == 0 ++ && pthread_mutex_destroy (mutex) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests locking of robust mutexes. */ ++static int ++test_status_robust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_mutexattr_setrobust (attr, PTHREAD_MUTEX_ROBUST) == 0 ++ && pthread_mutex_init (mutex, attr) == 0 ++ && test_locking_state_robust (mutex) == PASS /* Test status (robust). */ ++ && pthread_mutex_destroy (mutex) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests locking and state corruption of robust mutexes. We'll mark it as ++ inconsistent, then not recoverable. */ ++static int ++test_locking_state_robust (pthread_mutex_t *mutex) ++{ ++ int result = FAIL; ++ pthread_t thread; ++ ++ if (pthread_create (&thread, NULL, thread_func, mutex) == 0 /* Create. */ ++ && pthread_join (thread, NULL) == 0 ++ && pthread_mutex_lock (mutex) == EOWNERDEAD /* Test locking (robust). */ ++ && pthread_mutex_unlock (mutex) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Function to be called by the child thread when testing robust mutexes. */ ++static void * ++thread_func (void *arg) ++{ ++ pthread_mutex_t *mutex = (pthread_mutex_t *)arg; ++ ++ if (pthread_mutex_lock (mutex) != 0) /* Thread function. */ ++ exit (FAIL); ++ ++ /* Thread terminates without unlocking the mutex, thus marking it as ++ inconsistent. */ ++ return NULL; ++} ++ ++/* Tests locking the mutex multiple times in a row. */ ++static int ++test_recursive_locks (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_mutexattr_settype (attr, PTHREAD_MUTEX_RECURSIVE) == 0 ++ && pthread_mutex_init (mutex, attr) == 0 ++ && pthread_mutex_lock (mutex) == 0 ++ && pthread_mutex_lock (mutex) == 0 ++ && pthread_mutex_lock (mutex) == 0 /* Test recursive locks. */ ++ && pthread_mutex_unlock (mutex) == 0 ++ && pthread_mutex_unlock (mutex) == 0 ++ && pthread_mutex_unlock (mutex) == 0 ++ && pthread_mutex_destroy (mutex) == 0) ++ result = PASS; ++ ++ return result; ++} +diff --git a/nptl/test-mutex-printers.py b/nptl/test-mutex-printers.py +new file mode 100644 +index 0000000..7f542ad +--- /dev/null ++++ b/nptl/test-mutex-printers.py +@@ -0,0 +1,97 @@ ++# Tests for the MutexPrinter class. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++import sys ++ ++from test_printers_common import * ++ ++test_source = sys.argv[1] ++test_bin = sys.argv[2] ++printer_files = sys.argv[3:] ++printer_names = ['global glibc-pthread-locks'] ++ ++try: ++ init_test(test_bin, printer_files, printer_names) ++ go_to_main() ++ ++ var = 'mutex' ++ to_string = 'pthread_mutex_t' ++ ++ break_at(test_source, 'Test status (destroyed)') ++ continue_cmd() # Go to test_status_destroyed ++ test_printer(var, to_string, {'Status': 'Destroyed'}) ++ ++ break_at(test_source, 'Test status (non-robust)') ++ continue_cmd() # Go to test_status_no_robust ++ test_printer(var, to_string, {'Status': 'Unlocked'}) ++ next_cmd() ++ thread_id = get_current_thread_lwpid() ++ test_printer(var, to_string, {'Status': 'Locked, possibly with no waiters', ++ 'Owner ID': thread_id}) ++ ++ break_at(test_source, 'Test status (robust)') ++ continue_cmd() # Go to test_status_robust ++ test_printer(var, to_string, {'Status': 'Unlocked'}) ++ ++ # We'll now test the robust mutex locking states. We'll create a new ++ # thread that will lock a robust mutex and exit without unlocking it. ++ break_at(test_source, 'Create') ++ continue_cmd() # Go to test_locking_state_robust ++ # Set a breakpoint for the new thread to hit. ++ break_at(test_source, 'Thread function') ++ continue_cmd() ++ # By now the new thread is created and has hit its breakpoint. ++ set_scheduler_locking(True) ++ parent = 1 ++ child = 2 ++ select_thread(child) ++ child_id = get_current_thread_lwpid() ++ # We've got the new thread's ID. ++ select_thread(parent) ++ # Make the new thread finish its function while we wait. ++ continue_cmd(thread=child) ++ # The new thread should be dead by now. ++ break_at(test_source, 'Test locking (robust)') ++ continue_cmd() ++ test_printer(var, to_string, {'Owner ID': r'{0} \(dead\)'.format(child_id)}) ++ # Try to lock and unlock the mutex. ++ next_cmd() ++ test_printer(var, to_string, {'Owner ID': thread_id, ++ 'State protected by this mutex': 'Inconsistent'}) ++ next_cmd() ++ test_printer(var, to_string, {'Status': 'Unlocked', ++ 'State protected by this mutex': 'Not recoverable'}) ++ set_scheduler_locking(False) ++ ++ break_at(test_source, 'Test recursive locks') ++ continue_cmd() # Go to test_recursive_locks ++ test_printer(var, to_string, {'Times locked recursively': '2'}) ++ next_cmd() ++ test_printer(var, to_string, {'Times locked recursively': '3'}) ++ continue_cmd() # Exit ++ ++except (NoLineError, pexpect.TIMEOUT) as exception: ++ print('Error: {0}'.format(exception)) ++ result = FAIL ++ ++else: ++ print('Test succeeded.') ++ result = PASS ++ ++exit(result) +diff --git a/nptl/test-mutexattr-printers.c b/nptl/test-mutexattr-printers.c +new file mode 100644 +index 0000000..9ecfff7 +--- /dev/null ++++ b/nptl/test-mutexattr-printers.c +@@ -0,0 +1,144 @@ ++/* Helper program for testing the pthread_mutex_t and pthread_mutexattr_t ++ pretty printers. ++ ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++/* Keep the calls to the pthread_* functions on separate lines to make it easy ++ to advance through the program using the gdb 'next' command. */ ++ ++#include <pthread.h> ++ ++#define PASS 0 ++#define FAIL 1 ++#define PRIOCEILING 42 ++ ++/* Need these so we don't have lines longer than 79 chars. */ ++#define SET_TYPE(attr, type) pthread_mutexattr_settype (attr, type) ++#define SET_ROBUST(attr, robust) pthread_mutexattr_setrobust (attr, robust) ++#define SET_SHARED(attr, shared) pthread_mutexattr_setpshared (attr, shared) ++#define SET_PROTOCOL(attr, protocol) \ ++ pthread_mutexattr_setprotocol (attr, protocol) ++#define SET_PRIOCEILING(mutex, prioceiling, old_ceiling) \ ++ pthread_mutex_setprioceiling (mutex, prioceiling, old_ceiling) ++ ++static int mutex_reinit (pthread_mutex_t *mutex, ++ const pthread_mutexattr_t *attr); ++static int test_settype (pthread_mutex_t *mutex, pthread_mutexattr_t *attr); ++static int test_setrobust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr); ++static int test_setpshared (pthread_mutex_t *mutex, pthread_mutexattr_t *attr); ++static int test_setprotocol (pthread_mutex_t *mutex, ++ pthread_mutexattr_t *attr); ++ ++int ++main (void) ++{ ++ pthread_mutex_t mutex; ++ pthread_mutexattr_t attr; ++ int result = FAIL; ++ ++ if (pthread_mutexattr_init (&attr) == 0 ++ && pthread_mutex_init (&mutex, NULL) == 0 ++ && test_settype (&mutex, &attr) == PASS ++ && test_setrobust (&mutex, &attr) == PASS ++ && test_setpshared (&mutex, &attr) == PASS ++ && test_setprotocol (&mutex, &attr) == PASS) ++ result = PASS; ++ /* Else, one of the pthread_mutex* functions failed. */ ++ ++ return result; ++} ++ ++/* Destroys MUTEX and re-initializes it using ATTR. */ ++static int ++mutex_reinit (pthread_mutex_t *mutex, const pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_mutex_destroy (mutex) == 0 ++ && pthread_mutex_init (mutex, attr) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting the mutex type. */ ++static int ++test_settype (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (SET_TYPE (attr, PTHREAD_MUTEX_ERRORCHECK) == 0 /* Set type. */ ++ && mutex_reinit (mutex, attr) == 0 ++ && SET_TYPE (attr, PTHREAD_MUTEX_RECURSIVE) == 0 ++ && mutex_reinit (mutex, attr) == 0 ++ && SET_TYPE (attr, PTHREAD_MUTEX_NORMAL) == 0 ++ && mutex_reinit (mutex, attr) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting whether the mutex is robust. */ ++static int ++test_setrobust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (SET_ROBUST (attr, PTHREAD_MUTEX_ROBUST) == 0 /* Set robust. */ ++ && mutex_reinit (mutex, attr) == 0 ++ && SET_ROBUST (attr, PTHREAD_MUTEX_STALLED) == 0 ++ && mutex_reinit (mutex, attr) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting whether the mutex can be shared between processes. */ ++static int ++test_setpshared (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared. */ ++ && mutex_reinit (mutex, attr) == 0 ++ && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0 ++ && mutex_reinit (mutex, attr) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting the mutex protocol and, for Priority Protect, the Priority ++ Ceiling. */ ++static int ++test_setprotocol (pthread_mutex_t *mutex, pthread_mutexattr_t *attr) ++{ ++ int result = FAIL; ++ int old_prioceiling; ++ ++ if (SET_PROTOCOL (attr, PTHREAD_PRIO_INHERIT) == 0 /* Set protocol. */ ++ && mutex_reinit (mutex, attr) == 0 ++ && SET_PROTOCOL (attr, PTHREAD_PRIO_PROTECT) == 0 ++ && mutex_reinit (mutex, attr) == 0 ++ && SET_PRIOCEILING(mutex, PRIOCEILING, &old_prioceiling) == 0 ++ && SET_PROTOCOL (attr, PTHREAD_PRIO_NONE) == 0 ++ && mutex_reinit (mutex, attr) == 0) ++ result = PASS; ++ ++ return result; ++} +diff --git a/nptl/test-mutexattr-printers.py b/nptl/test-mutexattr-printers.py +new file mode 100644 +index 0000000..4464723 +--- /dev/null ++++ b/nptl/test-mutexattr-printers.py +@@ -0,0 +1,101 @@ ++# Common tests for the MutexPrinter and MutexAttributesPrinter classes. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++import sys ++ ++from test_printers_common import * ++ ++test_source = sys.argv[1] ++test_bin = sys.argv[2] ++printer_files = sys.argv[3:] ++printer_names = ['global glibc-pthread-locks'] ++PRIOCEILING = 42 ++ ++try: ++ init_test(test_bin, printer_files, printer_names) ++ go_to_main() ++ ++ check_debug_symbol('struct pthread_mutexattr') ++ ++ mutex_var = 'mutex' ++ mutex_to_string = 'pthread_mutex_t' ++ ++ attr_var = 'attr' ++ attr_to_string = 'pthread_mutexattr_t' ++ ++ break_at(test_source, 'Set type') ++ continue_cmd() # Go to test_settype ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Type': 'Error check'}) ++ test_printer(mutex_var, mutex_to_string, {'Type': 'Error check'}) ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Type': 'Recursive'}) ++ test_printer(mutex_var, mutex_to_string, {'Type': 'Recursive'}) ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Type': 'Normal'}) ++ test_printer(mutex_var, mutex_to_string, {'Type': 'Normal'}) ++ ++ break_at(test_source, 'Set robust') ++ continue_cmd() # Go to test_setrobust ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Robust': 'Yes'}) ++ test_printer(mutex_var, mutex_to_string, {'Robust': 'Yes'}) ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Robust': 'No'}) ++ test_printer(mutex_var, mutex_to_string, {'Robust': 'No'}) ++ ++ break_at(test_source, 'Set shared') ++ continue_cmd() # Go to test_setpshared ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Shared': 'Yes'}) ++ test_printer(mutex_var, mutex_to_string, {'Shared': 'Yes'}) ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Shared': 'No'}) ++ test_printer(mutex_var, mutex_to_string, {'Shared': 'No'}) ++ ++ break_at(test_source, 'Set protocol') ++ continue_cmd() # Go to test_setprotocol ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Protocol': 'Priority inherit'}) ++ test_printer(mutex_var, mutex_to_string, {'Protocol': 'Priority inherit'}) ++ next_cmd(2) ++ test_printer(attr_var, attr_to_string, {'Protocol': 'Priority protect'}) ++ test_printer(mutex_var, mutex_to_string, {'Protocol': 'Priority protect'}) ++ next_cmd(2) ++ test_printer(mutex_var, mutex_to_string, {'Priority ceiling': ++ str(PRIOCEILING)}) ++ next_cmd() ++ test_printer(attr_var, attr_to_string, {'Protocol': 'None'}) ++ test_printer(mutex_var, mutex_to_string, {'Protocol': 'None'}) ++ ++ continue_cmd() # Exit ++ ++except (NoLineError, pexpect.TIMEOUT) as exception: ++ print('Error: {0}'.format(exception)) ++ result = FAIL ++ ++except DebugError as exception: ++ print(exception) ++ result = UNSUPPORTED ++ ++else: ++ print('Test succeeded.') ++ result = PASS ++ ++exit(result) +diff --git a/nptl/test-rwlock-printers.c b/nptl/test-rwlock-printers.c +new file mode 100644 +index 0000000..dbbe9b8 +--- /dev/null ++++ b/nptl/test-rwlock-printers.c +@@ -0,0 +1,78 @@ ++/* Helper program for testing the pthread_rwlock_t pretty printer. ++ ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++/* Keep the calls to the pthread_* functions on separate lines to make it easy ++ to advance through the program using the gdb 'next' command. */ ++ ++#include <pthread.h> ++ ++#define PASS 0 ++#define FAIL 1 ++ ++static int test_locking_reader (pthread_rwlock_t *rwlock); ++static int test_locking_writer (pthread_rwlock_t *rwlock); ++ ++int ++main (void) ++{ ++ pthread_rwlock_t rwlock; ++ ++ int result = FAIL; ++ ++ if (test_locking_reader (&rwlock) == PASS ++ && test_locking_writer (&rwlock) == PASS) ++ result = PASS; ++ /* Else, one of the pthread_rwlock* functions failed. */ ++ ++ return result; ++} ++ ++/* Tests locking the rwlock multiple times as a reader. */ ++static int ++test_locking_reader (pthread_rwlock_t *rwlock) ++{ ++ int result = FAIL; ++ ++ if (pthread_rwlock_init (rwlock, NULL) == 0 ++ && pthread_rwlock_rdlock (rwlock) == 0 /* Test locking (reader). */ ++ && pthread_rwlock_rdlock (rwlock) == 0 ++ && pthread_rwlock_rdlock (rwlock) == 0 ++ && pthread_rwlock_unlock (rwlock) == 0 ++ && pthread_rwlock_unlock (rwlock) == 0 ++ && pthread_rwlock_unlock (rwlock) == 0 ++ && pthread_rwlock_destroy (rwlock) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests locking the rwlock as a writer. */ ++static int ++test_locking_writer (pthread_rwlock_t *rwlock) ++{ ++ int result = FAIL; ++ ++ if (pthread_rwlock_init (rwlock, NULL) == 0 ++ && pthread_rwlock_wrlock (rwlock) == 0 /* Test locking (writer). */ ++ && pthread_rwlock_unlock (rwlock) == 0 ++ && pthread_rwlock_destroy (rwlock) == 0) ++ result = PASS; ++ ++ return result; ++} +diff --git a/nptl/test-rwlock-printers.py b/nptl/test-rwlock-printers.py +new file mode 100644 +index 0000000..b972fa6 +--- /dev/null ++++ b/nptl/test-rwlock-printers.py +@@ -0,0 +1,64 @@ ++# Common tests for the RWLockPrinter class. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++import sys ++ ++from test_printers_common import * ++ ++test_source = sys.argv[1] ++test_bin = sys.argv[2] ++printer_files = sys.argv[3:] ++printer_names = ['global glibc-pthread-locks'] ++ ++try: ++ init_test(test_bin, printer_files, printer_names) ++ go_to_main() ++ ++ var = 'rwlock' ++ to_string = 'pthread_rwlock_t' ++ ++ break_at(test_source, 'Test locking (reader)') ++ continue_cmd() # Go to test_locking_reader ++ test_printer(var, to_string, {'Status': 'Unlocked'}) ++ next_cmd() ++ test_printer(var, to_string, {'Status': r'Locked \(Read\)', 'Readers': '1'}) ++ next_cmd() ++ test_printer(var, to_string, {'Readers': '2'}) ++ next_cmd() ++ test_printer(var, to_string, {'Readers': '3'}) ++ ++ break_at(test_source, 'Test locking (writer)') ++ continue_cmd() # Go to test_locking_writer ++ test_printer(var, to_string, {'Status': 'Unlocked'}) ++ next_cmd() ++ thread_id = get_current_thread_lwpid() ++ test_printer(var, to_string, {'Status': r'Locked \(Write\)', ++ 'Writer ID': thread_id}) ++ ++ continue_cmd() # Exit ++ ++except (NoLineError, pexpect.TIMEOUT) as exception: ++ print('Error: {0}'.format(exception)) ++ result = FAIL ++ ++else: ++ print('Test succeeded.') ++ result = PASS ++ ++exit(result) +diff --git a/nptl/test-rwlockattr-printers.c b/nptl/test-rwlockattr-printers.c +new file mode 100644 +index 0000000..d12facf +--- /dev/null ++++ b/nptl/test-rwlockattr-printers.c +@@ -0,0 +1,98 @@ ++/* Helper program for testing the pthread_rwlock_t and pthread_rwlockattr_t ++ pretty printers. ++ ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++/* Keep the calls to the pthread_* functions on separate lines to make it easy ++ to advance through the program using the gdb 'next' command. */ ++ ++#include <pthread.h> ++ ++#define PASS 0 ++#define FAIL 1 ++ ++/* Need these so we don't have lines longer than 79 chars. */ ++#define SET_KIND(attr, kind) pthread_rwlockattr_setkind_np (attr, kind) ++#define SET_SHARED(attr, shared) pthread_rwlockattr_setpshared (attr, shared) ++ ++static int rwlock_reinit (pthread_rwlock_t *rwlock, ++ const pthread_rwlockattr_t *attr); ++static int test_setkind_np (pthread_rwlock_t *rwlock, ++ pthread_rwlockattr_t *attr); ++static int test_setpshared (pthread_rwlock_t *rwlock, ++ pthread_rwlockattr_t *attr); ++ ++int ++main (void) ++{ ++ pthread_rwlock_t rwlock; ++ pthread_rwlockattr_t attr; ++ int result = FAIL; ++ ++ if (pthread_rwlockattr_init (&attr) == 0 ++ && pthread_rwlock_init (&rwlock, NULL) == 0 ++ && test_setkind_np (&rwlock, &attr) == PASS ++ && test_setpshared (&rwlock, &attr) == PASS) ++ result = PASS; ++ /* Else, one of the pthread_rwlock* functions failed. */ ++ ++ return result; ++} ++ ++/* Destroys RWLOCK and re-initializes it using ATTR. */ ++static int ++rwlock_reinit (pthread_rwlock_t *rwlock, const pthread_rwlockattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (pthread_rwlock_destroy (rwlock) == 0 ++ && pthread_rwlock_init (rwlock, attr) == 0) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting whether the rwlock prefers readers or writers. */ ++static int ++test_setkind_np (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (SET_KIND (attr, PTHREAD_RWLOCK_PREFER_READER_NP) == 0 /* Set kind. */ ++ && rwlock_reinit (rwlock, attr) == PASS ++ && SET_KIND (attr, PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP) == 0 ++ && rwlock_reinit (rwlock, attr) == PASS) ++ result = PASS; ++ ++ return result; ++} ++ ++/* Tests setting whether the rwlock can be shared between processes. */ ++static int ++test_setpshared (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr) ++{ ++ int result = FAIL; ++ ++ if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared. */ ++ && rwlock_reinit (rwlock, attr) == PASS ++ && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0 ++ && rwlock_reinit (rwlock, attr) == PASS) ++ result = PASS; ++ ++ return result; ++} +diff --git a/nptl/test-rwlockattr-printers.py b/nptl/test-rwlockattr-printers.py +new file mode 100644 +index 0000000..1ca2dc6 +--- /dev/null ++++ b/nptl/test-rwlockattr-printers.py +@@ -0,0 +1,73 @@ ++# Common tests for the RWLockPrinter and RWLockAttributesPrinter classes. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++import sys ++ ++from test_printers_common import * ++ ++test_source = sys.argv[1] ++test_bin = sys.argv[2] ++printer_files = sys.argv[3:] ++printer_names = ['global glibc-pthread-locks'] ++ ++try: ++ init_test(test_bin, printer_files, printer_names) ++ go_to_main() ++ ++ check_debug_symbol('struct pthread_rwlockattr') ++ ++ rwlock_var = 'rwlock' ++ rwlock_to_string = 'pthread_rwlock_t' ++ ++ attr_var = 'attr' ++ attr_to_string = 'pthread_rwlockattr_t' ++ ++ break_at(test_source, 'Set kind') ++ continue_cmd() # Go to test_setkind_np ++ next_cmd(2) ++ test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Readers'}) ++ test_printer(attr_var, attr_to_string, {'Prefers': 'Readers'}) ++ next_cmd(2) ++ test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Writers'}) ++ test_printer(attr_var, attr_to_string, {'Prefers': 'Writers'}) ++ ++ break_at(test_source, 'Set shared') ++ continue_cmd() # Go to test_setpshared ++ next_cmd(2) ++ test_printer(rwlock_var, rwlock_to_string, {'Shared': 'Yes'}) ++ test_printer(attr_var, attr_to_string, {'Shared': 'Yes'}) ++ next_cmd(2) ++ test_printer(rwlock_var, rwlock_to_string, {'Shared': 'No'}) ++ test_printer(attr_var, attr_to_string, {'Shared': 'No'}) ++ ++ continue_cmd() # Exit ++ ++except (NoLineError, pexpect.TIMEOUT) as exception: ++ print('Error: {0}'.format(exception)) ++ result = FAIL ++ ++except DebugError as exception: ++ print(exception) ++ result = UNSUPPORTED ++ ++else: ++ print('Test succeeded.') ++ result = PASS ++ ++exit(result) +diff --git a/scripts/gen-py-const.awk b/scripts/gen-py-const.awk +new file mode 100644 +index 0000000..4586f59 +--- /dev/null ++++ b/scripts/gen-py-const.awk +@@ -0,0 +1,118 @@ ++# Script to generate constants for Python pretty printers. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++# This script is a smaller version of the clever gen-asm-const.awk hack used to ++# generate ASM constants from .sym files. We'll use this to generate constants ++# for Python pretty printers. ++# ++# The input to this script are .pysym files that look like: ++# #C_Preprocessor_Directive... ++# NAME1 ++# NAME2 expression... ++# ++# A line giving just a name implies an expression consisting of just that name. ++# Comments start with '--'. ++# ++# The output of this script is a 'dummy' function containing 'asm' declarations ++# for each non-preprocessor line in the .pysym file. The expression values ++# will appear as input operands to the 'asm' declaration. For example, if we ++# have: ++# ++# /* header.h */ ++# #define MACRO 42 ++# ++# struct S { ++# char c1; ++# char c2; ++# char c3; ++# }; ++# ++# enum E { ++# ZERO, ++# ONE ++# }; ++# ++# /* symbols.pysym */ ++# #include <stddef.h> ++# #include "header.h" ++# -- This is a comment ++# MACRO ++# C3_OFFSET offsetof(struct S, c3) ++# E_ONE ONE ++# ++# the output will be: ++# ++# #include <stddef.h> ++# #include "header.h" ++# void dummy(void) ++# { ++# asm ("@name@MACRO@value@%0@" : : "i" (MACRO)); ++# asm ("@name@C3_OFFSET@value@%0@" : : "i" (offsetof(struct S, c3))); ++# asm ("@name@E_ONE@value@%0@" : : "i" (ONE)); ++# } ++# ++# We'll later feed this output to gcc -S. Since '-S' tells gcc to compile but ++# not assemble, gcc will output something like: ++# ++# dummy: ++# ... ++# @name@MACRO@value@$42@ ++# @name@C3_OFFSET@value@$2@ ++# @name@E_ONE@value@$1@ ++# ++# Finally, we can process that output to extract the constant values. ++# Notice gcc may prepend a special character such as '$' to each value. ++ ++# found_symbol indicates whether we found a non-comment, non-preprocessor line. ++BEGIN { found_symbol = 0 } ++ ++# C preprocessor directives go straight through. ++/^#/ { print; next; } ++ ++# Skip comments. ++/--/ { next; } ++ ++# Trim leading whitespace. ++{ sub(/^[[:blank:]]*/, ""); } ++ ++# If we found a non-comment, non-preprocessor line, print the 'dummy' function ++# header. ++NF > 0 && !found_symbol { ++ print "void dummy(void)\n{"; ++ found_symbol = 1; ++} ++ ++# If the line contains just a name, duplicate it so we can use that name ++# as the value of the expression. ++NF == 1 { sub(/^.*$/, "& &"); } ++ ++# If a line contains a name and an expression... ++NF > 1 { ++ name = $1; ++ ++ # Remove any characters before the second field. ++ sub(/^[^[:blank:]]+[[:blank:]]+/, ""); ++ ++ # '$0' ends up being everything that appeared after the first field ++ # separator. ++ printf " asm (\"@name@%s@value@%0@\" : : \"i\" (%s));\n", name, $0; ++} ++ ++# Close the 'dummy' function. ++END { if (found_symbol) print "}"; } +diff --git a/scripts/test_printers_common.py b/scripts/test_printers_common.py +new file mode 100644 +index 0000000..c79d7e3 +--- /dev/null ++++ b/scripts/test_printers_common.py +@@ -0,0 +1,364 @@ ++# Common functions and variables for testing the Python pretty printers. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++"""These tests require PExpect 4.0 or newer. ++ ++Exported constants: ++ PASS, FAIL, UNSUPPORTED (int): Test exit codes, as per evaluate-test.sh. ++""" ++ ++import os ++import re ++from test_printers_exceptions import * ++ ++PASS = 0 ++FAIL = 1 ++UNSUPPORTED = 77 ++ ++gdb_bin = 'gdb' ++gdb_options = '-q -nx' ++gdb_invocation = '{0} {1}'.format(gdb_bin, gdb_options) ++pexpect_min_version = 4 ++gdb_min_version = (7, 8) ++encoding = 'utf-8' ++ ++try: ++ import pexpect ++except ImportError: ++ print('PExpect 4.0 or newer must be installed to test the pretty printers.') ++ exit(UNSUPPORTED) ++ ++pexpect_version = pexpect.__version__.split('.')[0] ++ ++if int(pexpect_version) < pexpect_min_version: ++ print('PExpect 4.0 or newer must be installed to test the pretty printers.') ++ exit(UNSUPPORTED) ++ ++if not pexpect.which(gdb_bin): ++ print('gdb 7.8 or newer must be installed to test the pretty printers.') ++ exit(UNSUPPORTED) ++ ++timeout = 5 ++TIMEOUTFACTOR = os.environ.get('TIMEOUTFACTOR') ++ ++if TIMEOUTFACTOR: ++ timeout = int(TIMEOUTFACTOR) ++ ++try: ++ # Check the gdb version. ++ version_cmd = '{0} --version'.format(gdb_invocation, timeout=timeout) ++ gdb_version_out = pexpect.run(version_cmd, encoding=encoding) ++ ++ # The gdb version string is "GNU gdb <PKGVERSION><version>", where ++ # PKGVERSION can be any text. We assume that there'll always be a space ++ # between PKGVERSION and the version number for the sake of the regexp. ++ version_match = re.search(r'GNU gdb .* ([1-9]+)\.([0-9]+)', gdb_version_out) ++ ++ if not version_match: ++ print('The gdb version string (gdb -v) is incorrectly formatted.') ++ exit(UNSUPPORTED) ++ ++ gdb_version = (int(version_match.group(1)), int(version_match.group(2))) ++ ++ if gdb_version < gdb_min_version: ++ print('gdb 7.8 or newer must be installed to test the pretty printers.') ++ exit(UNSUPPORTED) ++ ++ # Check if gdb supports Python. ++ gdb_python_cmd = '{0} -ex "python import os" -batch'.format(gdb_invocation, ++ timeout=timeout) ++ gdb_python_error = pexpect.run(gdb_python_cmd, encoding=encoding) ++ ++ if gdb_python_error: ++ print('gdb must have python support to test the pretty printers.') ++ exit(UNSUPPORTED) ++ ++ # If everything's ok, spawn the gdb process we'll use for testing. ++ gdb = pexpect.spawn(gdb_invocation, echo=False, timeout=timeout, ++ encoding=encoding) ++ gdb_prompt = u'\(gdb\)' ++ gdb.expect(gdb_prompt) ++ ++except pexpect.ExceptionPexpect as exception: ++ print('Error: {0}'.format(exception)) ++ exit(FAIL) ++ ++def test(command, pattern=None): ++ """Sends 'command' to gdb and expects the given 'pattern'. ++ ++ If 'pattern' is None, simply consumes everything up to and including ++ the gdb prompt. ++ ++ Args: ++ command (string): The command we'll send to gdb. ++ pattern (raw string): A pattern the gdb output should match. ++ ++ Returns: ++ string: The string that matched 'pattern', or an empty string if ++ 'pattern' was None. ++ """ ++ ++ match = '' ++ ++ gdb.sendline(command) ++ ++ if pattern: ++ # PExpect does a non-greedy match for '+' and '*'. Since it can't look ++ # ahead on the gdb output stream, if 'pattern' ends with a '+' or a '*' ++ # we may end up matching only part of the required output. ++ # To avoid this, we'll consume 'pattern' and anything that follows it ++ # up to and including the gdb prompt, then extract 'pattern' later. ++ index = gdb.expect([u'{0}.+{1}'.format(pattern, gdb_prompt), ++ pexpect.TIMEOUT]) ++ ++ if index == 0: ++ # gdb.after now contains the whole match. Extract the text that ++ # matches 'pattern'. ++ match = re.match(pattern, gdb.after, re.DOTALL).group() ++ elif index == 1: ++ # We got a timeout exception. Print information on what caused it ++ # and bail out. ++ error = ('Response does not match the expected pattern.\n' ++ 'Command: {0}\n' ++ 'Expected pattern: {1}\n' ++ 'Response: {2}'.format(command, pattern, gdb.before)) ++ ++ raise pexpect.TIMEOUT(error) ++ else: ++ # Consume just the the gdb prompt. ++ gdb.expect(gdb_prompt) ++ ++ return match ++ ++def init_test(test_bin, printer_files, printer_names): ++ """Loads the test binary file and the required pretty printers to gdb. ++ ++ Args: ++ test_bin (string): The name of the test binary file. ++ pretty_printers (list of strings): A list with the names of the pretty ++ printer files. ++ """ ++ ++ # Load all the pretty printer files. We're assuming these are safe. ++ for printer_file in printer_files: ++ test('source {0}'.format(printer_file)) ++ ++ # Disable all the pretty printers. ++ test('disable pretty-printer', r'0 of [0-9]+ printers enabled') ++ ++ # Enable only the required printers. ++ for printer in printer_names: ++ test('enable pretty-printer {0}'.format(printer), ++ r'[1-9][0-9]* of [1-9]+ printers enabled') ++ ++ # Finally, load the test binary. ++ test('file {0}'.format(test_bin)) ++ ++def go_to_main(): ++ """Executes a gdb 'start' command, which takes us to main.""" ++ ++ test('start', r'main') ++ ++def get_line_number(file_name, string): ++ """Returns the number of the line in which 'string' appears within a file. ++ ++ Args: ++ file_name (string): The name of the file we'll search through. ++ string (string): The string we'll look for. ++ ++ Returns: ++ int: The number of the line in which 'string' appears, starting from 1. ++ """ ++ number = -1 ++ ++ with open(file_name) as src_file: ++ for i, line in enumerate(src_file): ++ if string in line: ++ number = i + 1 ++ break ++ ++ if number == -1: ++ raise NoLineError(file_name, string) ++ ++ return number ++ ++def break_at(file_name, string, temporary=True, thread=None): ++ """Places a breakpoint on the first line in 'file_name' containing 'string'. ++ ++ 'string' is usually a comment like "Stop here". Notice this may fail unless ++ the comment is placed inline next to actual code, e.g.: ++ ++ ... ++ /* Stop here */ ++ ... ++ ++ may fail, while: ++ ++ ... ++ some_func(); /* Stop here */ ++ ... ++ ++ will succeed. ++ ++ If 'thread' isn't None, the breakpoint will be set for all the threads. ++ Otherwise, it'll be set only for 'thread'. ++ ++ Args: ++ file_name (string): The name of the file we'll place the breakpoint in. ++ string (string): A string we'll look for inside the file. ++ We'll place a breakpoint on the line which contains it. ++ temporary (bool): Whether the breakpoint should be automatically deleted ++ after we reach it. ++ thread (int): The number of the thread we'll place the breakpoint for, ++ as seen by gdb. If specified, it should be greater than zero. ++ """ ++ ++ if not thread: ++ thread_str = '' ++ else: ++ thread_str = 'thread {0}'.format(thread) ++ ++ if temporary: ++ command = 'tbreak' ++ break_type = 'Temporary breakpoint' ++ else: ++ command = 'break' ++ break_type = 'Breakpoint' ++ ++ line_number = str(get_line_number(file_name, string)) ++ ++ test('{0} {1}:{2} {3}'.format(command, file_name, line_number, thread_str), ++ r'{0} [0-9]+ at 0x[a-f0-9]+: file {1}, line {2}\.'.format(break_type, ++ file_name, ++ line_number)) ++ ++def continue_cmd(thread=None): ++ """Executes a gdb 'continue' command. ++ ++ If 'thread' isn't None, the command will be applied to all the threads. ++ Otherwise, it'll be applied only to 'thread'. ++ ++ Args: ++ thread (int): The number of the thread we'll apply the command to, ++ as seen by gdb. If specified, it should be greater than zero. ++ """ ++ ++ if not thread: ++ command = 'continue' ++ else: ++ command = 'thread apply {0} continue'.format(thread) ++ ++ test(command) ++ ++def next_cmd(count=1, thread=None): ++ """Executes a gdb 'next' command. ++ ++ If 'thread' isn't None, the command will be applied to all the threads. ++ Otherwise, it'll be applied only to 'thread'. ++ ++ Args: ++ count (int): The 'count' argument of the 'next' command. ++ thread (int): The number of the thread we'll apply the command to, ++ as seen by gdb. If specified, it should be greater than zero. ++ """ ++ ++ if not thread: ++ command = 'next' ++ else: ++ command = 'thread apply {0} next' ++ ++ test('{0} {1}'.format(command, count)) ++ ++def select_thread(thread): ++ """Selects the thread indicated by 'thread'. ++ ++ Args: ++ thread (int): The number of the thread we'll switch to, as seen by gdb. ++ This should be greater than zero. ++ """ ++ ++ if thread > 0: ++ test('thread {0}'.format(thread)) ++ ++def get_current_thread_lwpid(): ++ """Gets the current thread's Lightweight Process ID. ++ ++ Returns: ++ string: The current thread's LWP ID. ++ """ ++ ++ # It's easier to get the LWP ID through the Python API than the gdb CLI. ++ command = 'python print(gdb.selected_thread().ptid[1])' ++ ++ return test(command, r'[0-9]+') ++ ++def set_scheduler_locking(mode): ++ """Executes the gdb 'set scheduler-locking' command. ++ ++ Args: ++ mode (bool): Whether the scheduler locking mode should be 'on'. ++ """ ++ modes = { ++ True: 'on', ++ False: 'off' ++ } ++ ++ test('set scheduler-locking {0}'.format(modes[mode])) ++ ++def test_printer(var, to_string, children=None, is_ptr=True): ++ """ Tests the output of a pretty printer. ++ ++ For a variable called 'var', this tests whether its associated printer ++ outputs the expected 'to_string' and children (if any). ++ ++ Args: ++ var (string): The name of the variable we'll print. ++ to_string (raw string): The expected output of the printer's 'to_string' ++ method. ++ children (map {raw string->raw string}): A map with the expected output ++ of the printer's children' method. ++ is_ptr (bool): Whether 'var' is a pointer, and thus should be ++ dereferenced. ++ """ ++ ++ if is_ptr: ++ var = '*{0}'.format(var) ++ ++ test('print {0}'.format(var), to_string) ++ ++ if children: ++ for name, value in children.items(): ++ # Children are shown as 'name = value'. ++ test('print {0}'.format(var), r'{0} = {1}'.format(name, value)) ++ ++def check_debug_symbol(symbol): ++ """ Tests whether a given debugging symbol exists. ++ ++ If the symbol doesn't exist, raises a DebugError. ++ ++ Args: ++ symbol (string): The symbol we're going to check for. ++ """ ++ ++ try: ++ test('ptype {0}'.format(symbol), r'type = {0}'.format(symbol)) ++ ++ except pexpect.TIMEOUT: ++ # The symbol doesn't exist. ++ raise DebugError(symbol) +diff --git a/scripts/test_printers_exceptions.py b/scripts/test_printers_exceptions.py +new file mode 100644 +index 0000000..17034b5 +--- /dev/null ++++ b/scripts/test_printers_exceptions.py +@@ -0,0 +1,61 @@ ++# Exception classes used when testing the Python pretty printers. ++# ++# Copyright (C) 2016 Free Software Foundation, Inc. ++# This file is part of the GNU C Library. ++# ++# The GNU C Library is free software; you can redistribute it and/or ++# modify it under the terms of the GNU Lesser General Public ++# License as published by the Free Software Foundation; either ++# version 2.1 of the License, or (at your option) any later version. ++# ++# The GNU C Library is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# Lesser General Public License for more details. ++# ++# You should have received a copy of the GNU Lesser General Public ++# License along with the GNU C Library; if not, see ++# <http://www.gnu.org/licenses/>. ++ ++class NoLineError(Exception): ++ """Custom exception to indicate that a test file doesn't contain ++ the requested string. ++ """ ++ ++ def __init__(self, file_name, string): ++ """Constructor. ++ ++ Args: ++ file_name (string): The name of the test file. ++ string (string): The string that was requested. ++ """ ++ ++ super(NoLineError, self).__init__() ++ self.file_name = file_name ++ self.string = string ++ ++ def __str__(self): ++ """Shows a readable representation of the exception.""" ++ ++ return ('File {0} has no line containing the following string: {1}' ++ .format(self.file_name, self.string)) ++ ++class DebugError(Exception): ++ """Custom exception to indicate that a required debugging symbol is missing. ++ """ ++ ++ def __init__(self, symbol): ++ """Constructor. ++ ++ Args: ++ symbol (string): The name of the entity whose debug info is missing. ++ """ ++ ++ super(DebugError, self).__init__() ++ self.symbol = symbol ++ ++ def __str__(self): ++ """Shows a readable representation of the exception.""" ++ ++ return ('The required debugging information for {0} is missing.' ++ .format(self.symbol)) +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0004-New-condvar-implementation-that-provides-stronger-or.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0004-New-condvar-implementation-that-provides-stronger-or.patch new file mode 100644 index 000000000..3c7bfa160 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0004-New-condvar-implementation-that-provides-stronger-or.patch @@ -0,0 +1,7171 @@ +From 27af8689a6ba8d182f3cbe6ba42cc654ceed0351 Mon Sep 17 00:00:00 2001 +From: Catalin Enache <catalin.enache@windriver.com> +Date: Fri, 30 Jun 2017 11:56:41 +0300 +Subject: [PATCH 4/6] New condvar implementation that provides stronger + ordering guarantees. + +This is a new implementation for condition variables, required +after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In +essence, we need to be stricter in which waiters a signal or broadcast +is required to wake up; this couldn't be solved using the old algorithm. +ISO C++ made a similar clarification, so this also fixes a bug in +current libstdc++, for example. + +We can't use the old algorithm anymore because futexes do not guarantee +to wake in FIFO order. Thus, when we wake, we can't simply let any +waiter grab a signal, but we need to ensure that one of the waiters +happening before the signal is woken up. This is something the previous +algorithm violated (see bug 13165). + +There's another issue specific to condvars: ABA issues on the underlying +futexes. Unlike mutexes that have just three states, or semaphores that +have no tokens or a limited number of them, the state of a condvar is +the *order* of the waiters. A waiter on a semaphore can grab a token +whenever one is available; a condvar waiter must only consume a signal +if it is eligible to do so as determined by the relative order of the +waiter and the signal. +Therefore, this new algorithm maintains two groups of waiters: Those +eligible to consume signals (G1), and those that have to wait until +previous waiters have consumed signals (G2). Once G1 is empty, G2 +becomes the new G1. 64b counters are used to avoid ABA issues. + +This condvar doesn't yet use a requeue optimization (ie, on a broadcast, +waking just one thread and requeueing all others on the futex of the +mutex supplied by the program). I don't think doing the requeue is +necessarily the right approach (but I haven't done real measurements +yet): +* If a program expects to wake many threads at the same time and make +that scalable, a condvar isn't great anyway because of how it requires +waiters to operate mutually exclusive (due to the mutex usage). Thus, a +thundering herd problem is a scalability problem with or without the +optimization. Using something like a semaphore might be more +appropriate in such a case. +* The scalability problem is actually at the mutex side; the condvar +could help (and it tries to with the requeue optimization), but it +should be the mutex who decides how that is done, and whether it is done +at all. +* Forcing all but one waiter into the kernel-side wait queue of the +mutex prevents/avoids the use of lock elision on the mutex. Thus, it +prevents the only cure against the underlying scalability problem +inherent to condvars. +* If condvars use short critical sections (ie, hold the mutex just to +check a binary flag or such), which they should do ideally, then forcing +all those waiter to proceed serially with kernel-based hand-off (ie, +futex ops in the mutex' contended state, via the futex wait queues) will +be less efficient than just letting a scalable mutex implementation take +care of it. Our current mutex impl doesn't employ spinning at all, but +if critical sections are short, spinning can be much better. +* Doing the requeue stuff requires all waiters to always drive the mutex +into the contended state. This leads to each waiter having to call +futex_wake after lock release, even if this wouldn't be necessary. + + [BZ #13165] + * nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to + use new algorithm. + * nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. + * nptl/pthread_cond_init.c (__pthread_cond_init): Likewise. + * nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise. + * nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise. + (__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c. + (__condvar_confirm_wakeup, __condvar_cancel_waiting, + __condvar_cleanup_waiting, __condvar_dec_grefs, + __pthread_cond_wait_common): New. + (__condvar_cleanup): Remove. + * npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt. + * npt/pthread_condattr_setclock.c (pthread_condattr_setclock): + Likewise. + * npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared): + Likewise. + * npt/pthread_condattr_init.c (pthread_condattr_init): Likewise. + * nptl/tst-cond1.c: Add comment. + * nptl/tst-cond20.c (do_test): Adapt. + * nptl/tst-cond22.c (do_test): Likewise. + * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt + structure. + * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t): + Likewise. + * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t): + Likewise. + * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t): + Likewise. + * sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise. + * sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove. + (COND_CLOCK_BITS): Adapt. + * sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt. + * nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK, + __PTHREAD_COND_SHARED_MASK): New. + * nptl/nptl-printers.py (CLOCK_IDS): Remove. + (ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt. + * nptl/nptl_lock_constants.pysym: Adapt. + * nptl/test-cond-printers.py: Adapt. + * sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear, + cond_compat_check_and_clear): Adapt. + * sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ... + * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c + (__pthread_cond_timedwait): ... and move here. + * nptl/DESIGN-condvar.txt: Remove file. + * nptl/lowlevelcond.sym: Likewise. + * nptl/pthread_cond_timedwait.c: Likewise. + * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise. + * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise. + * sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise. + * sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise. + * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise. + * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise. + +Upstream-Status: Backport + +Author: Torvald Riegel <triegel@redhat.com> +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + ChangeLog | 74 ++ + nptl/DESIGN-condvar.txt | 134 --- + nptl/Makefile | 6 +- + nptl/lowlevelcond.sym | 16 - + nptl/nptl-printers.py | 70 +- + nptl/nptl_lock_constants.pysym | 27 +- + nptl/pthreadP.h | 7 + + nptl/pthread_cond_broadcast.c | 99 ++- + nptl/pthread_cond_common.c | 466 ++++++++++ + nptl/pthread_cond_destroy.c | 82 +- + nptl/pthread_cond_init.c | 28 +- + nptl/pthread_cond_signal.c | 99 ++- + nptl/pthread_cond_timedwait.c | 268 ------ + nptl/pthread_cond_wait.c | 754 ++++++++++++---- + nptl/pthread_condattr_getclock.c | 2 +- + nptl/pthread_condattr_getpshared.c | 3 +- + nptl/pthread_condattr_init.c | 4 +- + nptl/pthread_condattr_setclock.c | 11 +- + nptl/test-cond-printers.py | 2 +- + nptl/tst-cond1.c | 3 + + nptl/tst-cond20.c | 5 +- + nptl/tst-cond22.c | 18 +- + sysdeps/aarch64/nptl/bits/pthreadtypes.h | 31 +- + sysdeps/arm/nptl/bits/pthreadtypes.h | 29 +- + sysdeps/ia64/nptl/bits/pthreadtypes.h | 31 +- + sysdeps/m68k/nptl/bits/pthreadtypes.h | 32 +- + sysdeps/microblaze/nptl/bits/pthreadtypes.h | 29 +- + sysdeps/mips/nptl/bits/pthreadtypes.h | 31 +- + sysdeps/nios2/nptl/bits/pthreadtypes.h | 31 +- + sysdeps/nptl/internaltypes.h | 17 +- + sysdeps/nptl/pthread.h | 2 +- + sysdeps/s390/nptl/bits/pthreadtypes.h | 29 +- + sysdeps/sh/nptl/bits/pthreadtypes.h | 29 +- + sysdeps/tile/nptl/bits/pthreadtypes.h | 29 +- + sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h | 31 +- + sysdeps/unix/sysv/linux/hppa/internaltypes.h | 40 +- + .../unix/sysv/linux/hppa/pthread_cond_timedwait.c | 41 - + sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c | 13 + + .../sysv/linux/i386/i686/pthread_cond_timedwait.S | 20 - + .../unix/sysv/linux/i386/pthread_cond_broadcast.S | 241 ----- + sysdeps/unix/sysv/linux/i386/pthread_cond_signal.S | 216 ----- + .../unix/sysv/linux/i386/pthread_cond_timedwait.S | 974 --------------------- + sysdeps/unix/sysv/linux/i386/pthread_cond_wait.S | 642 -------------- + .../unix/sysv/linux/powerpc/bits/pthreadtypes.h | 31 +- + .../sysv/linux/x86_64/pthread_cond_broadcast.S | 177 ---- + .../unix/sysv/linux/x86_64/pthread_cond_signal.S | 161 ---- + .../sysv/linux/x86_64/pthread_cond_timedwait.S | 623 ------------- + sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S | 555 ------------ + sysdeps/x86/bits/pthreadtypes.h | 29 +- + 49 files changed, 1671 insertions(+), 4621 deletions(-) + delete mode 100644 nptl/DESIGN-condvar.txt + delete mode 100644 nptl/lowlevelcond.sym + create mode 100644 nptl/pthread_cond_common.c + delete mode 100644 nptl/pthread_cond_timedwait.c + delete mode 100644 sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c + delete mode 100644 sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S + delete mode 100644 sysdeps/unix/sysv/linux/i386/pthread_cond_broadcast.S + delete mode 100644 sysdeps/unix/sysv/linux/i386/pthread_cond_signal.S + delete mode 100644 sysdeps/unix/sysv/linux/i386/pthread_cond_timedwait.S + delete mode 100644 sysdeps/unix/sysv/linux/i386/pthread_cond_wait.S + delete mode 100644 sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S + delete mode 100644 sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S + delete mode 100644 sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S + delete mode 100644 sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S + +diff --git a/ChangeLog b/ChangeLog +index 8036c1e..c94db7b 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,77 @@ ++2016-12-31 Torvald Riegel <triegel@redhat.com> ++ ++ [BZ #13165] ++ * nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to ++ use new algorithm. ++ * nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. ++ * nptl/pthread_cond_init.c (__pthread_cond_init): Likewise. ++ * nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise. ++ * nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise. ++ (__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c. ++ (__condvar_confirm_wakeup, __condvar_cancel_waiting, ++ __condvar_cleanup_waiting, __condvar_dec_grefs, ++ __pthread_cond_wait_common): New. ++ (__condvar_cleanup): Remove. ++ * npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt. ++ * npt/pthread_condattr_setclock.c (pthread_condattr_setclock): ++ Likewise. ++ * npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared): ++ Likewise. ++ * npt/pthread_condattr_init.c (pthread_condattr_init): Likewise. ++ * nptl/tst-cond1.c: Add comment. ++ * nptl/tst-cond20.c (do_test): Adapt. ++ * nptl/tst-cond22.c (do_test): Likewise. ++ * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt ++ structure. ++ * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t): ++ Likewise. ++ * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t): ++ Likewise. ++ * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t): ++ Likewise. ++ * sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise. ++ * sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove. ++ (COND_CLOCK_BITS): Adapt. ++ * sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt. ++ * nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK, ++ __PTHREAD_COND_SHARED_MASK): New. ++ * nptl/nptl-printers.py (CLOCK_IDS): Remove. ++ (ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt. ++ * nptl/nptl_lock_constants.pysym: Adapt. ++ * nptl/test-cond-printers.py: Adapt. ++ * sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear, ++ cond_compat_check_and_clear): Adapt. ++ * sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ... ++ * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c ++ (__pthread_cond_timedwait): ... and move here. ++ * nptl/DESIGN-condvar.txt: Remove file. ++ * nptl/lowlevelcond.sym: Likewise. ++ * nptl/pthread_cond_timedwait.c: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise. ++ * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise. ++ * sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise. ++ * sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise. ++ * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise. ++ * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise. ++ + 2016-12-08 Martin Galvan <martin.galvan@tallertechnologies.com> + + * INSTALL: Regenerated. +diff --git a/nptl/DESIGN-condvar.txt b/nptl/DESIGN-condvar.txt +deleted file mode 100644 +index 4845251..0000000 +--- a/nptl/DESIGN-condvar.txt ++++ /dev/null +@@ -1,134 +0,0 @@ +-Conditional Variable pseudocode. +-================================ +- +- int pthread_cond_timedwait (pthread_cond_t *cv, pthread_mutex_t *mutex); +- int pthread_cond_signal (pthread_cond_t *cv); +- int pthread_cond_broadcast (pthread_cond_t *cv); +- +-struct pthread_cond_t { +- +- unsigned int cond_lock; +- +- internal mutex +- +- uint64_t total_seq; +- +- Total number of threads using the conditional variable. +- +- uint64_t wakeup_seq; +- +- sequence number for next wakeup. +- +- uint64_t woken_seq; +- +- sequence number of last woken thread. +- +- uint32_t broadcast_seq; +- +-} +- +- +-struct cv_data { +- +- pthread_cond_t *cv; +- +- uint32_t bc_seq +- +-} +- +- +- +-cleanup_handler(cv_data) +-{ +- cv = cv_data->cv; +- lll_lock(cv->lock); +- +- if (cv_data->bc_seq == cv->broadcast_seq) { +- ++cv->wakeup_seq; +- ++cv->woken_seq; +- } +- +- /* make sure no signal gets lost. */ +- FUTEX_WAKE(cv->wakeup_seq, ALL); +- +- lll_unlock(cv->lock); +-} +- +- +-cond_timedwait(cv, mutex, timeout): +-{ +- lll_lock(cv->lock); +- mutex_unlock(mutex); +- +- cleanup_push +- +- ++cv->total_seq; +- val = seq = cv->wakeup_seq; +- cv_data.bc = cv->broadcast_seq; +- cv_data.cv = cv; +- +- while (1) { +- +- lll_unlock(cv->lock); +- +- enable_async(&cv_data); +- +- ret = FUTEX_WAIT(cv->wakeup_seq, val, timeout); +- +- restore_async +- +- lll_lock(cv->lock); +- +- if (bc != cv->broadcast_seq) +- goto bc_out; +- +- val = cv->wakeup_seq; +- +- if (val != seq && cv->woken_seq != val) { +- ret = 0; +- break; +- } +- +- if (ret == TIMEDOUT) { +- ++cv->wakeup_seq; +- break; +- } +- } +- +- ++cv->woken_seq; +- +- bc_out: +- lll_unlock(cv->lock); +- +- cleanup_pop +- +- mutex_lock(mutex); +- +- return ret; +-} +- +-cond_signal(cv) +-{ +- lll_lock(cv->lock); +- +- if (cv->total_seq > cv->wakeup_seq) { +- ++cv->wakeup_seq; +- FUTEX_WAKE(cv->wakeup_seq, 1); +- } +- +- lll_unlock(cv->lock); +-} +- +-cond_broadcast(cv) +-{ +- lll_lock(cv->lock); +- +- if (cv->total_seq > cv->wakeup_seq) { +- cv->wakeup_seq = cv->total_seq; +- cv->woken_seq = cv->total_seq; +- ++cv->broadcast_seq; +- FUTEX_WAKE(cv->wakeup_seq, ALL); +- } +- +- lll_unlock(cv->lock); +-} +diff --git a/nptl/Makefile b/nptl/Makefile +index 49f6ba6..1f0674c 100644 +--- a/nptl/Makefile ++++ b/nptl/Makefile +@@ -71,7 +71,7 @@ libpthread-routines = nptl-init vars events version pt-interp \ + pthread_rwlockattr_getkind_np \ + pthread_rwlockattr_setkind_np \ + pthread_cond_init pthread_cond_destroy \ +- pthread_cond_wait pthread_cond_timedwait \ ++ pthread_cond_wait \ + pthread_cond_signal pthread_cond_broadcast \ + old_pthread_cond_init old_pthread_cond_destroy \ + old_pthread_cond_wait old_pthread_cond_timedwait \ +@@ -181,7 +181,6 @@ CFLAGS-pthread_timedjoin.c = -fexceptions -fasynchronous-unwind-tables + CFLAGS-pthread_once.c = $(uses-callbacks) -fexceptions \ + -fasynchronous-unwind-tables + CFLAGS-pthread_cond_wait.c = -fexceptions -fasynchronous-unwind-tables +-CFLAGS-pthread_cond_timedwait.c = -fexceptions -fasynchronous-unwind-tables + CFLAGS-sem_wait.c = -fexceptions -fasynchronous-unwind-tables + CFLAGS-sem_timedwait.c = -fexceptions -fasynchronous-unwind-tables + +@@ -303,8 +302,7 @@ test-xfail-tst-once5 = yes + # Files which must not be linked with libpthread. + tests-nolibpthread = tst-unload + +-gen-as-const-headers = pthread-errnos.sym \ +- lowlevelcond.sym lowlevelrwlock.sym \ ++gen-as-const-headers = pthread-errnos.sym lowlevelrwlock.sym \ + unwindbuf.sym \ + lowlevelrobustlock.sym pthread-pi-defines.sym + +diff --git a/nptl/lowlevelcond.sym b/nptl/lowlevelcond.sym +deleted file mode 100644 +index 18e1ada..0000000 +--- a/nptl/lowlevelcond.sym ++++ /dev/null +@@ -1,16 +0,0 @@ +-#include <stddef.h> +-#include <sched.h> +-#include <bits/pthreadtypes.h> +-#include <internaltypes.h> +- +--- +- +-cond_lock offsetof (pthread_cond_t, __data.__lock) +-cond_futex offsetof (pthread_cond_t, __data.__futex) +-cond_nwaiters offsetof (pthread_cond_t, __data.__nwaiters) +-total_seq offsetof (pthread_cond_t, __data.__total_seq) +-wakeup_seq offsetof (pthread_cond_t, __data.__wakeup_seq) +-woken_seq offsetof (pthread_cond_t, __data.__woken_seq) +-dep_mutex offsetof (pthread_cond_t, __data.__mutex) +-broadcast_seq offsetof (pthread_cond_t, __data.__broadcast_seq) +-nwaiters_shift COND_NWAITERS_SHIFT +diff --git a/nptl/nptl-printers.py b/nptl/nptl-printers.py +index e402f23..76adadd 100644 +--- a/nptl/nptl-printers.py ++++ b/nptl/nptl-printers.py +@@ -293,16 +293,6 @@ class MutexAttributesPrinter(object): + elif protocol == PTHREAD_PRIO_PROTECT: + self.values.append(('Protocol', 'Priority protect')) + +-CLOCK_IDS = { +- CLOCK_REALTIME: 'CLOCK_REALTIME', +- CLOCK_MONOTONIC: 'CLOCK_MONOTONIC', +- CLOCK_PROCESS_CPUTIME_ID: 'CLOCK_PROCESS_CPUTIME_ID', +- CLOCK_THREAD_CPUTIME_ID: 'CLOCK_THREAD_CPUTIME_ID', +- CLOCK_MONOTONIC_RAW: 'CLOCK_MONOTONIC_RAW', +- CLOCK_REALTIME_COARSE: 'CLOCK_REALTIME_COARSE', +- CLOCK_MONOTONIC_COARSE: 'CLOCK_MONOTONIC_COARSE' +-} +- + class ConditionVariablePrinter(object): + """Pretty printer for pthread_cond_t.""" + +@@ -313,24 +303,8 @@ class ConditionVariablePrinter(object): + cond: A gdb.value representing a pthread_cond_t. + """ + +- # Since PTHREAD_COND_SHARED is an integer, we need to cast it to void * +- # to be able to compare it to the condvar's __data.__mutex member. +- # +- # While it looks like self.shared_value should be a class variable, +- # that would result in it having an incorrect size if we're loading +- # these printers through .gdbinit for a 64-bit objfile in AMD64. +- # This is because gdb initially assumes the pointer size to be 4 bytes, +- # and only sets it to 8 after loading the 64-bit objfiles. Since +- # .gdbinit runs before any objfiles are loaded, this would effectively +- # make self.shared_value have a size of 4, thus breaking later +- # comparisons with pointers whose types are looked up at runtime. +- void_ptr_type = gdb.lookup_type('void').pointer() +- self.shared_value = gdb.Value(PTHREAD_COND_SHARED).cast(void_ptr_type) +- + data = cond['__data'] +- self.total_seq = data['__total_seq'] +- self.mutex = data['__mutex'] +- self.nwaiters = data['__nwaiters'] ++ self.wrefs = data['__wrefs'] + self.values = [] + + self.read_values() +@@ -360,7 +334,6 @@ class ConditionVariablePrinter(object): + + self.read_status() + self.read_attributes() +- self.read_mutex_info() + + def read_status(self): + """Read the status of the condvar. +@@ -369,41 +342,22 @@ class ConditionVariablePrinter(object): + are waiting for it. + """ + +- if self.total_seq == PTHREAD_COND_DESTROYED: +- self.values.append(('Status', 'Destroyed')) +- +- self.values.append(('Threads waiting for this condvar', +- self.nwaiters >> COND_NWAITERS_SHIFT)) ++ self.values.append(('Threads known to still execute a wait function', ++ self.wrefs >> PTHREAD_COND_WREFS_SHIFT)) + + def read_attributes(self): + """Read the condvar's attributes.""" + +- clock_id = self.nwaiters & ((1 << COND_NWAITERS_SHIFT) - 1) +- +- # clock_id must be casted to int because it's a gdb.Value +- self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)])) ++ if (self.wrefs & PTHREAD_COND_CLOCK_MONOTONIC_MASK) != 0: ++ self.values.append(('Clock ID', 'CLOCK_MONOTONIC')) ++ else: ++ self.values.append(('Clock ID', 'CLOCK_REALTIME')) + +- shared = (self.mutex == self.shared_value) +- +- if shared: ++ if (self.wrefs & PTHREAD_COND_SHARED_MASK) != 0: + self.values.append(('Shared', 'Yes')) + else: + self.values.append(('Shared', 'No')) + +- def read_mutex_info(self): +- """Read the data of the mutex this condvar is bound to. +- +- A pthread_cond_t's __data.__mutex member is a void * which +- must be casted to pthread_mutex_t *. For shared condvars, this +- member isn't recorded and has a special value instead. +- """ +- +- if self.mutex and self.mutex != self.shared_value: +- mutex_type = gdb.lookup_type('pthread_mutex_t') +- mutex = self.mutex.cast(mutex_type.pointer()).dereference() +- +- self.values.append(('Mutex', mutex)) +- + class ConditionVariableAttributesPrinter(object): + """Pretty printer for pthread_condattr_t. + +@@ -453,10 +407,12 @@ class ConditionVariableAttributesPrinter(object): + created in self.children. + """ + +- clock_id = self.condattr & ((1 << COND_NWAITERS_SHIFT) - 1) ++ clock_id = (self.condattr >> 1) & ((1 << COND_CLOCK_BITS) - 1) + +- # clock_id must be casted to int because it's a gdb.Value +- self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)])) ++ if clock_id != 0: ++ self.values.append(('Clock ID', 'CLOCK_MONOTONIC')) ++ else: ++ self.values.append(('Clock ID', 'CLOCK_REALTIME')) + + if self.condattr & 1: + self.values.append(('Shared', 'Yes')) +diff --git a/nptl/nptl_lock_constants.pysym b/nptl/nptl_lock_constants.pysym +index 303ec61..2ab3179 100644 +--- a/nptl/nptl_lock_constants.pysym ++++ b/nptl/nptl_lock_constants.pysym +@@ -44,26 +44,13 @@ PTHREAD_PRIO_NONE + PTHREAD_PRIO_INHERIT + PTHREAD_PRIO_PROTECT + +--- These values are hardcoded as well: +--- Value of __mutex for shared condvars. +-PTHREAD_COND_SHARED (void *)~0l +- +--- Value of __total_seq for destroyed condvars. +-PTHREAD_COND_DESTROYED -1ull +- +--- __nwaiters encodes the number of threads waiting on a condvar +--- and the clock ID. +--- __nwaiters >> COND_NWAITERS_SHIFT gives us the number of waiters. +-COND_NWAITERS_SHIFT +- +--- Condvar clock IDs +-CLOCK_REALTIME +-CLOCK_MONOTONIC +-CLOCK_PROCESS_CPUTIME_ID +-CLOCK_THREAD_CPUTIME_ID +-CLOCK_MONOTONIC_RAW +-CLOCK_REALTIME_COARSE +-CLOCK_MONOTONIC_COARSE ++-- Condition variable ++-- FIXME Why do macros prefixed with __ cannot be used directly? ++PTHREAD_COND_SHARED_MASK __PTHREAD_COND_SHARED_MASK ++PTHREAD_COND_CLOCK_MONOTONIC_MASK __PTHREAD_COND_CLOCK_MONOTONIC_MASK ++COND_CLOCK_BITS ++-- These values are hardcoded: ++PTHREAD_COND_WREFS_SHIFT 3 + + -- Rwlock attributes + PTHREAD_RWLOCK_PREFER_READER_NP +diff --git a/nptl/pthreadP.h b/nptl/pthreadP.h +index 4edc74b..e9992bc 100644 +--- a/nptl/pthreadP.h ++++ b/nptl/pthreadP.h +@@ -167,6 +167,13 @@ enum + #define __PTHREAD_ONCE_FORK_GEN_INCR 4 + + ++/* Condition variable definitions. See __pthread_cond_wait_common. ++ Need to be defined here so there is one place from which ++ nptl_lock_constants can grab them. */ ++#define __PTHREAD_COND_CLOCK_MONOTONIC_MASK 2 ++#define __PTHREAD_COND_SHARED_MASK 1 ++ ++ + /* Internal variables. */ + + +diff --git a/nptl/pthread_cond_broadcast.c b/nptl/pthread_cond_broadcast.c +index 552fd42..87c0755 100644 +--- a/nptl/pthread_cond_broadcast.c ++++ b/nptl/pthread_cond_broadcast.c +@@ -19,72 +19,71 @@ + #include <endian.h> + #include <errno.h> + #include <sysdep.h> +-#include <lowlevellock.h> ++#include <futex-internal.h> + #include <pthread.h> + #include <pthreadP.h> + #include <stap-probe.h> ++#include <atomic.h> + + #include <shlib-compat.h> +-#include <kernel-features.h> + ++#include "pthread_cond_common.c" + ++ ++/* We do the following steps from __pthread_cond_signal in one critical ++ section: (1) signal all waiters in G1, (2) close G1 so that it can become ++ the new G2 and make G2 the new G1, and (3) signal all waiters in the new ++ G1. We don't need to do all these steps if there are no waiters in G1 ++ and/or G2. See __pthread_cond_signal for further details. */ + int + __pthread_cond_broadcast (pthread_cond_t *cond) + { + LIBC_PROBE (cond_broadcast, 1, cond); + +- int pshared = (cond->__data.__mutex == (void *) ~0l) +- ? LLL_SHARED : LLL_PRIVATE; +- /* Make sure we are alone. */ +- lll_lock (cond->__data.__lock, pshared); ++ unsigned int wrefs = atomic_load_relaxed (&cond->__data.__wrefs); ++ if (wrefs >> 3 == 0) ++ return 0; ++ int private = __condvar_get_private (wrefs); ++ ++ __condvar_acquire_lock (cond, private); + +- /* Are there any waiters to be woken? */ +- if (cond->__data.__total_seq > cond->__data.__wakeup_seq) ++ unsigned long long int wseq = __condvar_load_wseq_relaxed (cond); ++ unsigned int g2 = wseq & 1; ++ unsigned int g1 = g2 ^ 1; ++ wseq >>= 1; ++ bool do_futex_wake = false; ++ ++ /* Step (1): signal all waiters remaining in G1. */ ++ if (cond->__data.__g_size[g1] != 0) + { +- /* Yes. Mark them all as woken. */ +- cond->__data.__wakeup_seq = cond->__data.__total_seq; +- cond->__data.__woken_seq = cond->__data.__total_seq; +- cond->__data.__futex = (unsigned int) cond->__data.__total_seq * 2; +- int futex_val = cond->__data.__futex; +- /* Signal that a broadcast happened. */ +- ++cond->__data.__broadcast_seq; +- +- /* We are done. */ +- lll_unlock (cond->__data.__lock, pshared); +- +- /* Wake everybody. */ +- pthread_mutex_t *mut = (pthread_mutex_t *) cond->__data.__mutex; +- +- /* Do not use requeue for pshared condvars. */ +- if (mut == (void *) ~0l +- || PTHREAD_MUTEX_PSHARED (mut) & PTHREAD_MUTEX_PSHARED_BIT) +- goto wake_all; +- +-#if (defined lll_futex_cmp_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- if (USE_REQUEUE_PI (mut)) +- { +- if (lll_futex_cmp_requeue_pi (&cond->__data.__futex, 1, INT_MAX, +- &mut->__data.__lock, futex_val, +- LLL_PRIVATE) == 0) +- return 0; +- } +- else +-#endif +- /* lll_futex_requeue returns 0 for success and non-zero +- for errors. */ +- if (!__builtin_expect (lll_futex_requeue (&cond->__data.__futex, 1, +- INT_MAX, &mut->__data.__lock, +- futex_val, LLL_PRIVATE), 0)) +- return 0; +- +-wake_all: +- lll_futex_wake (&cond->__data.__futex, INT_MAX, pshared); +- return 0; ++ /* Add as many signals as the remaining size of the group. */ ++ atomic_fetch_add_relaxed (cond->__data.__g_signals + g1, ++ cond->__data.__g_size[g1] << 1); ++ cond->__data.__g_size[g1] = 0; ++ ++ /* We need to wake G1 waiters before we quiesce G1 below. */ ++ /* TODO Only set it if there are indeed futex waiters. We could ++ also try to move this out of the critical section in cases when ++ G2 is empty (and we don't need to quiesce). */ ++ futex_wake (cond->__data.__g_signals + g1, INT_MAX, private); + } + +- /* We are done. */ +- lll_unlock (cond->__data.__lock, pshared); ++ /* G1 is complete. Step (2) is next unless there are no waiters in G2, in ++ which case we can stop. */ ++ if (__condvar_quiesce_and_switch_g1 (cond, wseq, &g1, private)) ++ { ++ /* Step (3): Send signals to all waiters in the old G2 / new G1. */ ++ atomic_fetch_add_relaxed (cond->__data.__g_signals + g1, ++ cond->__data.__g_size[g1] << 1); ++ cond->__data.__g_size[g1] = 0; ++ /* TODO Only set it if there are indeed futex waiters. */ ++ do_futex_wake = true; ++ } ++ ++ __condvar_release_lock (cond, private); ++ ++ if (do_futex_wake) ++ futex_wake (cond->__data.__g_signals + g1, INT_MAX, private); + + return 0; + } +diff --git a/nptl/pthread_cond_common.c b/nptl/pthread_cond_common.c +new file mode 100644 +index 0000000..b374396 +--- /dev/null ++++ b/nptl/pthread_cond_common.c +@@ -0,0 +1,466 @@ ++/* pthread_cond_common -- shared code for condition variable. ++ Copyright (C) 2016 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ <http://www.gnu.org/licenses/>. */ ++ ++#include <atomic.h> ++#include <stdint.h> ++#include <pthread.h> ++#include <libc-internal.h> ++ ++/* We need 3 least-significant bits on __wrefs for something else. */ ++#define __PTHREAD_COND_MAX_GROUP_SIZE ((unsigned) 1 << 29) ++ ++#if __HAVE_64B_ATOMICS == 1 ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_load_wseq_relaxed (pthread_cond_t *cond) ++{ ++ return atomic_load_relaxed (&cond->__data.__wseq); ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_fetch_add_wseq_acquire (pthread_cond_t *cond, unsigned int val) ++{ ++ return atomic_fetch_add_acquire (&cond->__data.__wseq, val); ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_fetch_xor_wseq_release (pthread_cond_t *cond, unsigned int val) ++{ ++ return atomic_fetch_xor_release (&cond->__data.__wseq, val); ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_load_g1_start_relaxed (pthread_cond_t *cond) ++{ ++ return atomic_load_relaxed (&cond->__data.__g1_start); ++} ++ ++static void __attribute__ ((unused)) ++__condvar_add_g1_start_relaxed (pthread_cond_t *cond, unsigned int val) ++{ ++ atomic_store_relaxed (&cond->__data.__g1_start, ++ atomic_load_relaxed (&cond->__data.__g1_start) + val); ++} ++ ++#else ++ ++/* We use two 64b counters: __wseq and __g1_start. They are monotonically ++ increasing and single-writer-multiple-readers counters, so we can implement ++ load, fetch-and-add, and fetch-and-xor operations even when we just have ++ 32b atomics. Values we add or xor are less than or equal to 1<<31 (*), ++ so we only have to make overflow-and-addition atomic wrt. to concurrent ++ load operations and xor operations. To do that, we split each counter into ++ two 32b values of which we reserve the MSB of each to represent an ++ overflow from the lower-order half to the higher-order half. ++ ++ In the common case, the state is (higher-order / lower-order half, and . is ++ basically concatenation of the bits): ++ 0.h / 0.l = h.l ++ ++ When we add a value of x that overflows (i.e., 0.l + x == 1.L), we run the ++ following steps S1-S4 (the values these represent are on the right-hand ++ side): ++ S1: 0.h / 1.L == (h+1).L ++ S2: 1.(h+1) / 1.L == (h+1).L ++ S3: 1.(h+1) / 0.L == (h+1).L ++ S4: 0.(h+1) / 0.L == (h+1).L ++ If the LSB of the higher-order half is set, readers will ignore the ++ overflow bit in the lower-order half. ++ ++ To get an atomic snapshot in load operations, we exploit that the ++ higher-order half is monotonically increasing; if we load a value V from ++ it, then read the lower-order half, and then read the higher-order half ++ again and see the same value V, we know that both halves have existed in ++ the sequence of values the full counter had. This is similar to the ++ validated reads in the time-based STMs in GCC's libitm (e.g., ++ method_ml_wt). ++ ++ The xor operation needs to be an atomic read-modify-write. The write ++ itself is not an issue as it affects just the lower-order half but not bits ++ used in the add operation. To make the full fetch-and-xor atomic, we ++ exploit that concurrently, the value can increase by at most 1<<31 (*): The ++ xor operation is only called while having acquired the lock, so not more ++ than __PTHREAD_COND_MAX_GROUP_SIZE waiters can enter concurrently and thus ++ increment __wseq. Therefore, if the xor operation observes a value of ++ __wseq, then the value it applies the modification to later on can be ++ derived (see below). ++ ++ One benefit of this scheme is that this makes load operations ++ obstruction-free because unlike if we would just lock the counter, readers ++ can almost always interpret a snapshot of each halves. Readers can be ++ forced to read a new snapshot when the read is concurrent with an overflow. ++ However, overflows will happen infrequently, so load operations are ++ practically lock-free. ++ ++ (*) The highest value we add is __PTHREAD_COND_MAX_GROUP_SIZE << 2 to ++ __g1_start (the two extra bits are for the lock in the two LSBs of ++ __g1_start). */ ++ ++typedef struct ++{ ++ unsigned int low; ++ unsigned int high; ++} _condvar_lohi; ++ ++static uint64_t ++__condvar_fetch_add_64_relaxed (_condvar_lohi *lh, unsigned int op) ++{ ++ /* S1. Note that this is an atomic read-modify-write so it extends the ++ release sequence of release MO store at S3. */ ++ unsigned int l = atomic_fetch_add_relaxed (&lh->low, op); ++ unsigned int h = atomic_load_relaxed (&lh->high); ++ uint64_t result = ((uint64_t) h << 31) | l; ++ l += op; ++ if ((l >> 31) > 0) ++ { ++ /* Overflow. Need to increment higher-order half. Note that all ++ add operations are ordered in happens-before. */ ++ h++; ++ /* S2. Release MO to synchronize with the loads of the higher-order half ++ in the load operation. See __condvar_load_64_relaxed. */ ++ atomic_store_release (&lh->high, h | ((unsigned int) 1 << 31)); ++ l ^= (unsigned int) 1 << 31; ++ /* S3. See __condvar_load_64_relaxed. */ ++ atomic_store_release (&lh->low, l); ++ /* S4. Likewise. */ ++ atomic_store_release (&lh->high, h); ++ } ++ return result; ++} ++ ++static uint64_t ++__condvar_load_64_relaxed (_condvar_lohi *lh) ++{ ++ unsigned int h, l, h2; ++ do ++ { ++ /* This load and the second one below to the same location read from the ++ stores in the overflow handling of the add operation or the ++ initializing stores (which is a simple special case because ++ initialization always completely happens before further use). ++ Because no two stores to the higher-order half write the same value, ++ the loop ensures that if we continue to use the snapshot, this load ++ and the second one read from the same store operation. All candidate ++ store operations have release MO. ++ If we read from S2 in the first load, then we will see the value of ++ S1 on the next load (because we synchronize with S2), or a value ++ later in modification order. We correctly ignore the lower-half's ++ overflow bit in this case. If we read from S4, then we will see the ++ value of S3 in the next load (or a later value), which does not have ++ the overflow bit set anymore. ++ */ ++ h = atomic_load_acquire (&lh->high); ++ /* This will read from the release sequence of S3 (i.e, either the S3 ++ store or the read-modify-writes at S1 following S3 in modification ++ order). Thus, the read synchronizes with S3, and the following load ++ of the higher-order half will read from the matching S2 (or a later ++ value). ++ Thus, if we read a lower-half value here that already overflowed and ++ belongs to an increased higher-order half value, we will see the ++ latter and h and h2 will not be equal. */ ++ l = atomic_load_acquire (&lh->low); ++ /* See above. */ ++ h2 = atomic_load_relaxed (&lh->high); ++ } ++ while (h != h2); ++ if (((l >> 31) > 0) && ((h >> 31) > 0)) ++ l ^= (unsigned int) 1 << 31; ++ return ((uint64_t) (h & ~((unsigned int) 1 << 31)) << 31) + l; ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_load_wseq_relaxed (pthread_cond_t *cond) ++{ ++ return __condvar_load_64_relaxed ((_condvar_lohi *) &cond->__data.__wseq32); ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_fetch_add_wseq_acquire (pthread_cond_t *cond, unsigned int val) ++{ ++ uint64_t r = __condvar_fetch_add_64_relaxed ++ ((_condvar_lohi *) &cond->__data.__wseq32, val); ++ atomic_thread_fence_acquire (); ++ return r; ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_fetch_xor_wseq_release (pthread_cond_t *cond, unsigned int val) ++{ ++ _condvar_lohi *lh = (_condvar_lohi *) &cond->__data.__wseq32; ++ /* First, get the current value. See __condvar_load_64_relaxed. */ ++ unsigned int h, l, h2; ++ do ++ { ++ h = atomic_load_acquire (&lh->high); ++ l = atomic_load_acquire (&lh->low); ++ h2 = atomic_load_relaxed (&lh->high); ++ } ++ while (h != h2); ++ if (((l >> 31) > 0) && ((h >> 31) == 0)) ++ h++; ++ h &= ~((unsigned int) 1 << 31); ++ l &= ~((unsigned int) 1 << 31); ++ ++ /* Now modify. Due to the coherence rules, the prior load will read a value ++ earlier in modification order than the following fetch-xor. ++ This uses release MO to make the full operation have release semantics ++ (all other operations access the lower-order half). */ ++ unsigned int l2 = atomic_fetch_xor_release (&lh->low, val) ++ & ~((unsigned int) 1 << 31); ++ if (l2 < l) ++ /* The lower-order half overflowed in the meantime. This happened exactly ++ once due to the limit on concurrent waiters (see above). */ ++ h++; ++ return ((uint64_t) h << 31) + l2; ++} ++ ++static uint64_t __attribute__ ((unused)) ++__condvar_load_g1_start_relaxed (pthread_cond_t *cond) ++{ ++ return __condvar_load_64_relaxed ++ ((_condvar_lohi *) &cond->__data.__g1_start32); ++} ++ ++static void __attribute__ ((unused)) ++__condvar_add_g1_start_relaxed (pthread_cond_t *cond, unsigned int val) ++{ ++ ignore_value (__condvar_fetch_add_64_relaxed ++ ((_condvar_lohi *) &cond->__data.__g1_start32, val)); ++} ++ ++#endif /* !__HAVE_64B_ATOMICS */ ++ ++ ++/* The lock that signalers use. See pthread_cond_wait_common for uses. ++ The lock is our normal three-state lock: not acquired (0) / acquired (1) / ++ acquired-with-futex_wake-request (2). However, we need to preserve the ++ other bits in the unsigned int used for the lock, and therefore it is a ++ little more complex. */ ++static void __attribute__ ((unused)) ++__condvar_acquire_lock (pthread_cond_t *cond, int private) ++{ ++ unsigned int s = atomic_load_relaxed (&cond->__data.__g1_orig_size); ++ while ((s & 3) == 0) ++ { ++ if (atomic_compare_exchange_weak_acquire (&cond->__data.__g1_orig_size, ++ &s, s | 1)) ++ return; ++ /* TODO Spinning and back-off. */ ++ } ++ /* We can't change from not acquired to acquired, so try to change to ++ acquired-with-futex-wake-request and do a futex wait if we cannot change ++ from not acquired. */ ++ while (1) ++ { ++ while ((s & 3) != 2) ++ { ++ if (atomic_compare_exchange_weak_acquire ++ (&cond->__data.__g1_orig_size, &s, (s & ~(unsigned int) 3) | 2)) ++ { ++ if ((s & 3) == 0) ++ return; ++ break; ++ } ++ /* TODO Back off. */ ++ } ++ futex_wait_simple (&cond->__data.__g1_orig_size, ++ (s & ~(unsigned int) 3) | 2, private); ++ /* Reload so we see a recent value. */ ++ s = atomic_load_relaxed (&cond->__data.__g1_orig_size); ++ } ++} ++ ++/* See __condvar_acquire_lock. */ ++static void __attribute__ ((unused)) ++__condvar_release_lock (pthread_cond_t *cond, int private) ++{ ++ if ((atomic_fetch_and_release (&cond->__data.__g1_orig_size, ++ ~(unsigned int) 3) & 3) ++ == 2) ++ futex_wake (&cond->__data.__g1_orig_size, 1, private); ++} ++ ++/* Only use this when having acquired the lock. */ ++static unsigned int __attribute__ ((unused)) ++__condvar_get_orig_size (pthread_cond_t *cond) ++{ ++ return atomic_load_relaxed (&cond->__data.__g1_orig_size) >> 2; ++} ++ ++/* Only use this when having acquired the lock. */ ++static void __attribute__ ((unused)) ++__condvar_set_orig_size (pthread_cond_t *cond, unsigned int size) ++{ ++ /* We have acquired the lock, but might get one concurrent update due to a ++ lock state change from acquired to acquired-with-futex_wake-request. ++ The store with relaxed MO is fine because there will be no further ++ changes to the lock bits nor the size, and we will subsequently release ++ the lock with release MO. */ ++ unsigned int s; ++ s = (atomic_load_relaxed (&cond->__data.__g1_orig_size) & 3) ++ | (size << 2); ++ if ((atomic_exchange_relaxed (&cond->__data.__g1_orig_size, s) & 3) ++ != (s & 3)) ++ atomic_store_relaxed (&cond->__data.__g1_orig_size, (size << 2) | 2); ++} ++ ++/* Returns FUTEX_SHARED or FUTEX_PRIVATE based on the provided __wrefs ++ value. */ ++static int __attribute__ ((unused)) ++__condvar_get_private (int flags) ++{ ++ if ((flags & __PTHREAD_COND_SHARED_MASK) == 0) ++ return FUTEX_PRIVATE; ++ else ++ return FUTEX_SHARED; ++} ++ ++/* This closes G1 (whose index is in G1INDEX), waits for all futex waiters to ++ leave G1, converts G1 into a fresh G2, and then switches group roles so that ++ the former G2 becomes the new G1 ending at the current __wseq value when we ++ eventually make the switch (WSEQ is just an observation of __wseq by the ++ signaler). ++ If G2 is empty, it will not switch groups because then it would create an ++ empty G1 which would require switching groups again on the next signal. ++ Returns false iff groups were not switched because G2 was empty. */ ++static bool __attribute__ ((unused)) ++__condvar_quiesce_and_switch_g1 (pthread_cond_t *cond, uint64_t wseq, ++ unsigned int *g1index, int private) ++{ ++ const unsigned int maxspin = 0; ++ unsigned int g1 = *g1index; ++ ++ /* If there is no waiter in G2, we don't do anything. The expression may ++ look odd but remember that __g_size might hold a negative value, so ++ putting the expression this way avoids relying on implementation-defined ++ behavior. ++ Note that this works correctly for a zero-initialized condvar too. */ ++ unsigned int old_orig_size = __condvar_get_orig_size (cond); ++ uint64_t old_g1_start = __condvar_load_g1_start_relaxed (cond) >> 1; ++ if (((unsigned) (wseq - old_g1_start - old_orig_size) ++ + cond->__data.__g_size[g1 ^ 1]) == 0) ++ return false; ++ ++ /* Now try to close and quiesce G1. We have to consider the following kinds ++ of waiters: ++ * Waiters from less recent groups than G1 are not affected because ++ nothing will change for them apart from __g1_start getting larger. ++ * New waiters arriving concurrently with the group switching will all go ++ into G2 until we atomically make the switch. Waiters existing in G2 ++ are not affected. ++ * Waiters in G1 will be closed out immediately by setting a flag in ++ __g_signals, which will prevent waiters from blocking using a futex on ++ __g_signals and also notifies them that the group is closed. As a ++ result, they will eventually remove their group reference, allowing us ++ to close switch group roles. */ ++ ++ /* First, set the closed flag on __g_signals. This tells waiters that are ++ about to wait that they shouldn't do that anymore. This basically ++ serves as an advance notificaton of the upcoming change to __g1_start; ++ waiters interpret it as if __g1_start was larger than their waiter ++ sequence position. This allows us to change __g1_start after waiting ++ for all existing waiters with group references to leave, which in turn ++ makes recovery after stealing a signal simpler because it then can be ++ skipped if __g1_start indicates that the group is closed (otherwise, ++ we would have to recover always because waiters don't know how big their ++ groups are). Relaxed MO is fine. */ ++ atomic_fetch_or_relaxed (cond->__data.__g_signals + g1, 1); ++ ++ /* Wait until there are no group references anymore. The fetch-or operation ++ injects us into the modification order of __g_refs; release MO ensures ++ that waiters incrementing __g_refs after our fetch-or see the previous ++ changes to __g_signals and to __g1_start that had to happen before we can ++ switch this G1 and alias with an older group (we have two groups, so ++ aliasing requires switching group roles twice). Note that nobody else ++ can have set the wake-request flag, so we do not have to act upon it. ++ ++ Also note that it is harmless if older waiters or waiters from this G1 ++ get a group reference after we have quiesced the group because it will ++ remain closed for them either because of the closed flag in __g_signals ++ or the later update to __g1_start. New waiters will never arrive here ++ but instead continue to go into the still current G2. */ ++ unsigned r = atomic_fetch_or_release (cond->__data.__g_refs + g1, 0); ++ while ((r >> 1) > 0) ++ { ++ for (unsigned int spin = maxspin; ((r >> 1) > 0) && (spin > 0); spin--) ++ { ++ /* TODO Back off. */ ++ r = atomic_load_relaxed (cond->__data.__g_refs + g1); ++ } ++ if ((r >> 1) > 0) ++ { ++ /* There is still a waiter after spinning. Set the wake-request ++ flag and block. Relaxed MO is fine because this is just about ++ this futex word. */ ++ r = atomic_fetch_or_relaxed (cond->__data.__g_refs + g1, 1); ++ ++ if ((r >> 1) > 0) ++ futex_wait_simple (cond->__data.__g_refs + g1, r, private); ++ /* Reload here so we eventually see the most recent value even if we ++ do not spin. */ ++ r = atomic_load_relaxed (cond->__data.__g_refs + g1); ++ } ++ } ++ /* Acquire MO so that we synchronize with the release operation that waiters ++ use to decrement __g_refs and thus happen after the waiters we waited ++ for. */ ++ atomic_thread_fence_acquire (); ++ ++ /* Update __g1_start, which finishes closing this group. The value we add ++ will never be negative because old_orig_size can only be zero when we ++ switch groups the first time after a condvar was initialized, in which ++ case G1 will be at index 1 and we will add a value of 1. See above for ++ why this takes place after waiting for quiescence of the group. ++ Relaxed MO is fine because the change comes with no additional ++ constraints that others would have to observe. */ ++ __condvar_add_g1_start_relaxed (cond, ++ (old_orig_size << 1) + (g1 == 1 ? 1 : - 1)); ++ ++ /* Now reopen the group, thus enabling waiters to again block using the ++ futex controlled by __g_signals. Release MO so that observers that see ++ no signals (and thus can block) also see the write __g1_start and thus ++ that this is now a new group (see __pthread_cond_wait_common for the ++ matching acquire MO loads). */ ++ atomic_store_release (cond->__data.__g_signals + g1, 0); ++ ++ /* At this point, the old G1 is now a valid new G2 (but not in use yet). ++ No old waiter can neither grab a signal nor acquire a reference without ++ noticing that __g1_start is larger. ++ We can now publish the group switch by flipping the G2 index in __wseq. ++ Release MO so that this synchronizes with the acquire MO operation ++ waiters use to obtain a position in the waiter sequence. */ ++ wseq = __condvar_fetch_xor_wseq_release (cond, 1) >> 1; ++ g1 ^= 1; ++ *g1index ^= 1; ++ ++ /* These values are just observed by signalers, and thus protected by the ++ lock. */ ++ unsigned int orig_size = wseq - (old_g1_start + old_orig_size); ++ __condvar_set_orig_size (cond, orig_size); ++ /* Use and addition to not loose track of cancellations in what was ++ previously G2. */ ++ cond->__data.__g_size[g1] += orig_size; ++ ++ /* The new G1's size may be zero because of cancellations during its time ++ as G2. If this happens, there are no waiters that have to receive a ++ signal, so we do not need to add any and return false. */ ++ if (cond->__data.__g_size[g1] == 0) ++ return false; ++ ++ return true; ++} +diff --git a/nptl/pthread_cond_destroy.c b/nptl/pthread_cond_destroy.c +index 1acd804..5845c6a 100644 +--- a/nptl/pthread_cond_destroy.c ++++ b/nptl/pthread_cond_destroy.c +@@ -20,66 +20,42 @@ + #include <shlib-compat.h> + #include "pthreadP.h" + #include <stap-probe.h> +- +- ++#include <atomic.h> ++#include <futex-internal.h> ++ ++#include "pthread_cond_common.c" ++ ++/* See __pthread_cond_wait for a high-level description of the algorithm. ++ ++ A correct program must make sure that no waiters are blocked on the condvar ++ when it is destroyed, and that there are no concurrent signals or ++ broadcasts. To wake waiters reliably, the program must signal or ++ broadcast while holding the mutex or after having held the mutex. It must ++ also ensure that no signal or broadcast are still pending to unblock ++ waiters; IOW, because waiters can wake up spuriously, the program must ++ effectively ensure that destruction happens after the execution of those ++ signal or broadcast calls. ++ Thus, we can assume that all waiters that are still accessing the condvar ++ have been woken. We wait until they have confirmed to have woken up by ++ decrementing __wrefs. */ + int + __pthread_cond_destroy (pthread_cond_t *cond) + { +- int pshared = (cond->__data.__mutex == (void *) ~0l) +- ? LLL_SHARED : LLL_PRIVATE; +- + LIBC_PROBE (cond_destroy, 1, cond); + +- /* Make sure we are alone. */ +- lll_lock (cond->__data.__lock, pshared); +- +- if (cond->__data.__total_seq > cond->__data.__wakeup_seq) +- { +- /* If there are still some waiters which have not been +- woken up, this is an application bug. */ +- lll_unlock (cond->__data.__lock, pshared); +- return EBUSY; +- } +- +- /* Tell pthread_cond_*wait that this condvar is being destroyed. */ +- cond->__data.__total_seq = -1ULL; +- +- /* If there are waiters which have been already signalled or +- broadcasted, but still are using the pthread_cond_t structure, +- pthread_cond_destroy needs to wait for them. */ +- unsigned int nwaiters = cond->__data.__nwaiters; +- +- if (nwaiters >= (1 << COND_NWAITERS_SHIFT)) ++ /* Set the wake request flag. We could also spin, but destruction that is ++ concurrent with still-active waiters is probably neither common nor ++ performance critical. Acquire MO to synchronize with waiters confirming ++ that they finished. */ ++ unsigned int wrefs = atomic_fetch_or_acquire (&cond->__data.__wrefs, 4); ++ int private = __condvar_get_private (wrefs); ++ while (wrefs >> 3 != 0) + { +- /* Wake everybody on the associated mutex in case there are +- threads that have been requeued to it. +- Without this, pthread_cond_destroy could block potentially +- for a long time or forever, as it would depend on other +- thread's using the mutex. +- When all threads waiting on the mutex are woken up, pthread_cond_wait +- only waits for threads to acquire and release the internal +- condvar lock. */ +- if (cond->__data.__mutex != NULL +- && cond->__data.__mutex != (void *) ~0l) +- { +- pthread_mutex_t *mut = (pthread_mutex_t *) cond->__data.__mutex; +- lll_futex_wake (&mut->__data.__lock, INT_MAX, +- PTHREAD_MUTEX_PSHARED (mut)); +- } +- +- do +- { +- lll_unlock (cond->__data.__lock, pshared); +- +- lll_futex_wait (&cond->__data.__nwaiters, nwaiters, pshared); +- +- lll_lock (cond->__data.__lock, pshared); +- +- nwaiters = cond->__data.__nwaiters; +- } +- while (nwaiters >= (1 << COND_NWAITERS_SHIFT)); ++ futex_wait_simple (&cond->__data.__wrefs, wrefs, private); ++ /* See above. */ ++ wrefs = atomic_load_acquire (&cond->__data.__wrefs); + } +- ++ /* The memory the condvar occupies can now be reused. */ + return 0; + } + versioned_symbol (libpthread, __pthread_cond_destroy, +diff --git a/nptl/pthread_cond_init.c b/nptl/pthread_cond_init.c +index 9023370..c1eac5f 100644 +--- a/nptl/pthread_cond_init.c ++++ b/nptl/pthread_cond_init.c +@@ -19,25 +19,29 @@ + #include <shlib-compat.h> + #include "pthreadP.h" + #include <stap-probe.h> ++#include <string.h> + + ++/* See __pthread_cond_wait for details. */ + int + __pthread_cond_init (pthread_cond_t *cond, const pthread_condattr_t *cond_attr) + { + struct pthread_condattr *icond_attr = (struct pthread_condattr *) cond_attr; + +- cond->__data.__lock = LLL_LOCK_INITIALIZER; +- cond->__data.__futex = 0; +- cond->__data.__nwaiters = (icond_attr != NULL +- ? ((icond_attr->value >> 1) +- & ((1 << COND_NWAITERS_SHIFT) - 1)) +- : CLOCK_REALTIME); +- cond->__data.__total_seq = 0; +- cond->__data.__wakeup_seq = 0; +- cond->__data.__woken_seq = 0; +- cond->__data.__mutex = (icond_attr == NULL || (icond_attr->value & 1) == 0 +- ? NULL : (void *) ~0l); +- cond->__data.__broadcast_seq = 0; ++ memset (cond, 0, sizeof (pthread_cond_t)); ++ ++ /* Update the pretty printers if the internal representation of icond_attr ++ is changed. */ ++ ++ /* Iff not equal to ~0l, this is a PTHREAD_PROCESS_PRIVATE condvar. */ ++ if (icond_attr != NULL && (icond_attr->value & 1) != 0) ++ cond->__data.__wrefs |= __PTHREAD_COND_SHARED_MASK; ++ int clockid = (icond_attr != NULL ++ ? ((icond_attr->value >> 1) & ((1 << COND_CLOCK_BITS) - 1)) ++ : CLOCK_REALTIME); ++ /* If 0, CLOCK_REALTIME is used; CLOCK_MONOTONIC otherwise. */ ++ if (clockid != CLOCK_REALTIME) ++ cond->__data.__wrefs |= __PTHREAD_COND_CLOCK_MONOTONIC_MASK; + + LIBC_PROBE (cond_init, 2, cond, cond_attr); + +diff --git a/nptl/pthread_cond_signal.c b/nptl/pthread_cond_signal.c +index b3a6d3d..a95d569 100644 +--- a/nptl/pthread_cond_signal.c ++++ b/nptl/pthread_cond_signal.c +@@ -19,62 +19,79 @@ + #include <endian.h> + #include <errno.h> + #include <sysdep.h> +-#include <lowlevellock.h> ++#include <futex-internal.h> + #include <pthread.h> + #include <pthreadP.h> ++#include <atomic.h> ++#include <stdint.h> + + #include <shlib-compat.h> +-#include <kernel-features.h> + #include <stap-probe.h> + ++#include "pthread_cond_common.c" + ++/* See __pthread_cond_wait for a high-level description of the algorithm. */ + int + __pthread_cond_signal (pthread_cond_t *cond) + { +- int pshared = (cond->__data.__mutex == (void *) ~0l) +- ? LLL_SHARED : LLL_PRIVATE; +- + LIBC_PROBE (cond_signal, 1, cond); + +- /* Make sure we are alone. */ +- lll_lock (cond->__data.__lock, pshared); +- +- /* Are there any waiters to be woken? */ +- if (cond->__data.__total_seq > cond->__data.__wakeup_seq) ++ /* First check whether there are waiters. Relaxed MO is fine for that for ++ the same reasons that relaxed MO is fine when observing __wseq (see ++ below). */ ++ unsigned int wrefs = atomic_load_relaxed (&cond->__data.__wrefs); ++ if (wrefs >> 3 == 0) ++ return 0; ++ int private = __condvar_get_private (wrefs); ++ ++ __condvar_acquire_lock (cond, private); ++ ++ /* Load the waiter sequence number, which represents our relative ordering ++ to any waiters. Relaxed MO is sufficient for that because: ++ 1) We can pick any position that is allowed by external happens-before ++ constraints. In particular, if another __pthread_cond_wait call ++ happened before us, this waiter must be eligible for being woken by ++ us. The only way do establish such a happens-before is by signaling ++ while having acquired the mutex associated with the condvar and ++ ensuring that the signal's critical section happens after the waiter. ++ Thus, the mutex ensures that we see that waiter's __wseq increase. ++ 2) Once we pick a position, we do not need to communicate this to the ++ program via a happens-before that we set up: First, any wake-up could ++ be a spurious wake-up, so the program must not interpret a wake-up as ++ an indication that the waiter happened before a particular signal; ++ second, a program cannot detect whether a waiter has not yet been ++ woken (i.e., it cannot distinguish between a non-woken waiter and one ++ that has been woken but hasn't resumed execution yet), and thus it ++ cannot try to deduce that a signal happened before a particular ++ waiter. */ ++ unsigned long long int wseq = __condvar_load_wseq_relaxed (cond); ++ unsigned int g1 = (wseq & 1) ^ 1; ++ wseq >>= 1; ++ bool do_futex_wake = false; ++ ++ /* If G1 is still receiving signals, we put the signal there. If not, we ++ check if G2 has waiters, and if so, quiesce and switch G1 to the former ++ G2; if this results in a new G1 with waiters (G2 might have cancellations ++ already, see __condvar_quiesce_and_switch_g1), we put the signal in the ++ new G1. */ ++ if ((cond->__data.__g_size[g1] != 0) ++ || __condvar_quiesce_and_switch_g1 (cond, wseq, &g1, private)) + { +- /* Yes. Mark one of them as woken. */ +- ++cond->__data.__wakeup_seq; +- ++cond->__data.__futex; +- +-#if (defined lll_futex_cmp_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- pthread_mutex_t *mut = cond->__data.__mutex; +- +- if (USE_REQUEUE_PI (mut) +- /* This can only really fail with a ENOSYS, since nobody can modify +- futex while we have the cond_lock. */ +- && lll_futex_cmp_requeue_pi (&cond->__data.__futex, 1, 0, +- &mut->__data.__lock, +- cond->__data.__futex, pshared) == 0) +- { +- lll_unlock (cond->__data.__lock, pshared); +- return 0; +- } +- else +-#endif +- /* Wake one. */ +- if (! __builtin_expect (lll_futex_wake_unlock (&cond->__data.__futex, +- 1, 1, +- &cond->__data.__lock, +- pshared), 0)) +- return 0; +- +- /* Fallback if neither of them work. */ +- lll_futex_wake (&cond->__data.__futex, 1, pshared); ++ /* Add a signal. Relaxed MO is fine because signaling does not need to ++ establish a happens-before relation (see above). We do not mask the ++ release-MO store when initializing a group in ++ __condvar_quiesce_and_switch_g1 because we use an atomic ++ read-modify-write and thus extend that store's release sequence. */ ++ atomic_fetch_add_relaxed (cond->__data.__g_signals + g1, 2); ++ cond->__data.__g_size[g1]--; ++ /* TODO Only set it if there are indeed futex waiters. */ ++ do_futex_wake = true; + } + +- /* We are done. */ +- lll_unlock (cond->__data.__lock, pshared); ++ __condvar_release_lock (cond, private); ++ ++ if (do_futex_wake) ++ futex_wake (cond->__data.__g_signals + g1, 1, private); + + return 0; + } +diff --git a/nptl/pthread_cond_timedwait.c b/nptl/pthread_cond_timedwait.c +deleted file mode 100644 +index 711a51d..0000000 +--- a/nptl/pthread_cond_timedwait.c ++++ /dev/null +@@ -1,268 +0,0 @@ +-/* Copyright (C) 2003-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Martin Schwidefsky <schwidefsky@de.ibm.com>, 2003. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <endian.h> +-#include <errno.h> +-#include <sysdep.h> +-#include <lowlevellock.h> +-#include <pthread.h> +-#include <pthreadP.h> +-#include <sys/time.h> +-#include <kernel-features.h> +- +-#include <shlib-compat.h> +- +-#ifndef HAVE_CLOCK_GETTIME_VSYSCALL +-# undef INTERNAL_VSYSCALL +-# define INTERNAL_VSYSCALL INTERNAL_SYSCALL +-# undef INLINE_VSYSCALL +-# define INLINE_VSYSCALL INLINE_SYSCALL +-#else +-# include <libc-vdso.h> +-#endif +- +-/* Cleanup handler, defined in pthread_cond_wait.c. */ +-extern void __condvar_cleanup (void *arg) +- __attribute__ ((visibility ("hidden"))); +- +-struct _condvar_cleanup_buffer +-{ +- int oldtype; +- pthread_cond_t *cond; +- pthread_mutex_t *mutex; +- unsigned int bc_seq; +-}; +- +-int +-__pthread_cond_timedwait (pthread_cond_t *cond, pthread_mutex_t *mutex, +- const struct timespec *abstime) +-{ +- struct _pthread_cleanup_buffer buffer; +- struct _condvar_cleanup_buffer cbuffer; +- int result = 0; +- +- /* Catch invalid parameters. */ +- if (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000) +- return EINVAL; +- +- int pshared = (cond->__data.__mutex == (void *) ~0l) +- ? LLL_SHARED : LLL_PRIVATE; +- +-#if (defined lll_futex_timed_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- int pi_flag = 0; +-#endif +- +- /* Make sure we are alone. */ +- lll_lock (cond->__data.__lock, pshared); +- +- /* Now we can release the mutex. */ +- int err = __pthread_mutex_unlock_usercnt (mutex, 0); +- if (err) +- { +- lll_unlock (cond->__data.__lock, pshared); +- return err; +- } +- +- /* We have one new user of the condvar. */ +- ++cond->__data.__total_seq; +- ++cond->__data.__futex; +- cond->__data.__nwaiters += 1 << COND_NWAITERS_SHIFT; +- +- /* Work around the fact that the kernel rejects negative timeout values +- despite them being valid. */ +- if (__glibc_unlikely (abstime->tv_sec < 0)) +- goto timeout; +- +- /* Remember the mutex we are using here. If there is already a +- different address store this is a bad user bug. Do not store +- anything for pshared condvars. */ +- if (cond->__data.__mutex != (void *) ~0l) +- cond->__data.__mutex = mutex; +- +- /* Prepare structure passed to cancellation handler. */ +- cbuffer.cond = cond; +- cbuffer.mutex = mutex; +- +- /* Before we block we enable cancellation. Therefore we have to +- install a cancellation handler. */ +- __pthread_cleanup_push (&buffer, __condvar_cleanup, &cbuffer); +- +- /* The current values of the wakeup counter. The "woken" counter +- must exceed this value. */ +- unsigned long long int val; +- unsigned long long int seq; +- val = seq = cond->__data.__wakeup_seq; +- /* Remember the broadcast counter. */ +- cbuffer.bc_seq = cond->__data.__broadcast_seq; +- +- while (1) +- { +-#if (!defined __ASSUME_FUTEX_CLOCK_REALTIME \ +- || !defined lll_futex_timed_wait_bitset) +- struct timespec rt; +- { +-# ifdef __NR_clock_gettime +- INTERNAL_SYSCALL_DECL (err); +- (void) INTERNAL_VSYSCALL (clock_gettime, err, 2, +- (cond->__data.__nwaiters +- & ((1 << COND_NWAITERS_SHIFT) - 1)), +- &rt); +- /* Convert the absolute timeout value to a relative timeout. */ +- rt.tv_sec = abstime->tv_sec - rt.tv_sec; +- rt.tv_nsec = abstime->tv_nsec - rt.tv_nsec; +-# else +- /* Get the current time. So far we support only one clock. */ +- struct timeval tv; +- (void) __gettimeofday (&tv, NULL); +- +- /* Convert the absolute timeout value to a relative timeout. */ +- rt.tv_sec = abstime->tv_sec - tv.tv_sec; +- rt.tv_nsec = abstime->tv_nsec - tv.tv_usec * 1000; +-# endif +- } +- if (rt.tv_nsec < 0) +- { +- rt.tv_nsec += 1000000000; +- --rt.tv_sec; +- } +- /* Did we already time out? */ +- if (__glibc_unlikely (rt.tv_sec < 0)) +- { +- if (cbuffer.bc_seq != cond->__data.__broadcast_seq) +- goto bc_out; +- +- goto timeout; +- } +-#endif +- +- unsigned int futex_val = cond->__data.__futex; +- +- /* Prepare to wait. Release the condvar futex. */ +- lll_unlock (cond->__data.__lock, pshared); +- +- /* Enable asynchronous cancellation. Required by the standard. */ +- cbuffer.oldtype = __pthread_enable_asynccancel (); +- +-/* REQUEUE_PI was implemented after FUTEX_CLOCK_REALTIME, so it is sufficient +- to check just the former. */ +-#if (defined lll_futex_timed_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- /* If pi_flag remained 1 then it means that we had the lock and the mutex +- but a spurious waker raced ahead of us. Give back the mutex before +- going into wait again. */ +- if (pi_flag) +- { +- __pthread_mutex_cond_lock_adjust (mutex); +- __pthread_mutex_unlock_usercnt (mutex, 0); +- } +- pi_flag = USE_REQUEUE_PI (mutex); +- +- if (pi_flag) +- { +- unsigned int clockbit = (cond->__data.__nwaiters & 1 +- ? 0 : FUTEX_CLOCK_REALTIME); +- err = lll_futex_timed_wait_requeue_pi (&cond->__data.__futex, +- futex_val, abstime, clockbit, +- &mutex->__data.__lock, +- pshared); +- pi_flag = (err == 0); +- } +- else +-#endif +- +- { +-#if (!defined __ASSUME_FUTEX_CLOCK_REALTIME \ +- || !defined lll_futex_timed_wait_bitset) +- /* Wait until woken by signal or broadcast. */ +- err = lll_futex_timed_wait (&cond->__data.__futex, +- futex_val, &rt, pshared); +-#else +- unsigned int clockbit = (cond->__data.__nwaiters & 1 +- ? 0 : FUTEX_CLOCK_REALTIME); +- err = lll_futex_timed_wait_bitset (&cond->__data.__futex, futex_val, +- abstime, clockbit, pshared); +-#endif +- } +- +- /* Disable asynchronous cancellation. */ +- __pthread_disable_asynccancel (cbuffer.oldtype); +- +- /* We are going to look at shared data again, so get the lock. */ +- lll_lock (cond->__data.__lock, pshared); +- +- /* If a broadcast happened, we are done. */ +- if (cbuffer.bc_seq != cond->__data.__broadcast_seq) +- goto bc_out; +- +- /* Check whether we are eligible for wakeup. */ +- val = cond->__data.__wakeup_seq; +- if (val != seq && cond->__data.__woken_seq != val) +- break; +- +- /* Not woken yet. Maybe the time expired? */ +- if (__glibc_unlikely (err == -ETIMEDOUT)) +- { +- timeout: +- /* Yep. Adjust the counters. */ +- ++cond->__data.__wakeup_seq; +- ++cond->__data.__futex; +- +- /* The error value. */ +- result = ETIMEDOUT; +- break; +- } +- } +- +- /* Another thread woken up. */ +- ++cond->__data.__woken_seq; +- +- bc_out: +- +- cond->__data.__nwaiters -= 1 << COND_NWAITERS_SHIFT; +- +- /* If pthread_cond_destroy was called on this variable already, +- notify the pthread_cond_destroy caller all waiters have left +- and it can be successfully destroyed. */ +- if (cond->__data.__total_seq == -1ULL +- && cond->__data.__nwaiters < (1 << COND_NWAITERS_SHIFT)) +- lll_futex_wake (&cond->__data.__nwaiters, 1, pshared); +- +- /* We are done with the condvar. */ +- lll_unlock (cond->__data.__lock, pshared); +- +- /* The cancellation handling is back to normal, remove the handler. */ +- __pthread_cleanup_pop (&buffer, 0); +- +- /* Get the mutex before returning. */ +-#if (defined lll_futex_timed_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- if (pi_flag) +- { +- __pthread_mutex_cond_lock_adjust (mutex); +- err = 0; +- } +- else +-#endif +- err = __pthread_mutex_cond_lock (mutex); +- +- return err ?: result; +-} +- +-versioned_symbol (libpthread, __pthread_cond_timedwait, pthread_cond_timedwait, +- GLIBC_2_3_2); +diff --git a/nptl/pthread_cond_wait.c b/nptl/pthread_cond_wait.c +index 3f62acc..2b43402 100644 +--- a/nptl/pthread_cond_wait.c ++++ b/nptl/pthread_cond_wait.c +@@ -19,219 +19,655 @@ + #include <endian.h> + #include <errno.h> + #include <sysdep.h> +-#include <lowlevellock.h> ++#include <futex-internal.h> + #include <pthread.h> + #include <pthreadP.h> +-#include <kernel-features.h> ++#include <sys/time.h> ++#include <atomic.h> ++#include <stdint.h> ++#include <stdbool.h> + + #include <shlib-compat.h> + #include <stap-probe.h> ++#include <time.h> ++ ++#include "pthread_cond_common.c" ++ + + struct _condvar_cleanup_buffer + { +- int oldtype; ++ uint64_t wseq; + pthread_cond_t *cond; + pthread_mutex_t *mutex; +- unsigned int bc_seq; ++ int private; + }; + + +-void +-__attribute__ ((visibility ("hidden"))) +-__condvar_cleanup (void *arg) ++/* Decrease the waiter reference count. */ ++static void ++__condvar_confirm_wakeup (pthread_cond_t *cond, int private) + { +- struct _condvar_cleanup_buffer *cbuffer = +- (struct _condvar_cleanup_buffer *) arg; +- unsigned int destroying; +- int pshared = (cbuffer->cond->__data.__mutex == (void *) ~0l) +- ? LLL_SHARED : LLL_PRIVATE; ++ /* If destruction is pending (i.e., the wake-request flag is nonzero) and we ++ are the last waiter (prior value of __wrefs was 1 << 3), then wake any ++ threads waiting in pthread_cond_destroy. Release MO to synchronize with ++ these threads. Don't bother clearing the wake-up request flag. */ ++ if ((atomic_fetch_add_release (&cond->__data.__wrefs, -8) >> 2) == 3) ++ futex_wake (&cond->__data.__wrefs, INT_MAX, private); ++} ++ + +- /* We are going to modify shared data. */ +- lll_lock (cbuffer->cond->__data.__lock, pshared); ++/* Cancel waiting after having registered as a waiter previously. SEQ is our ++ position and G is our group index. ++ The goal of cancellation is to make our group smaller if that is still ++ possible. If we are in a closed group, this is not possible anymore; in ++ this case, we need to send a replacement signal for the one we effectively ++ consumed because the signal should have gotten consumed by another waiter ++ instead; we must not both cancel waiting and consume a signal. ++ ++ Must not be called while still holding a reference on the group. ++ ++ Returns true iff we consumed a signal. ++ ++ On some kind of timeouts, we may be able to pretend that a signal we ++ effectively consumed happened before the timeout (i.e., similarly to first ++ spinning on signals before actually checking whether the timeout has ++ passed already). Doing this would allow us to skip sending a replacement ++ signal, but this case might happen rarely because the end of the timeout ++ must race with someone else sending a signal. Therefore, we don't bother ++ trying to optimize this. */ ++static void ++__condvar_cancel_waiting (pthread_cond_t *cond, uint64_t seq, unsigned int g, ++ int private) ++{ ++ bool consumed_signal = false; + +- if (cbuffer->bc_seq == cbuffer->cond->__data.__broadcast_seq) ++ /* No deadlock with group switching is possible here because we have do ++ not hold a reference on the group. */ ++ __condvar_acquire_lock (cond, private); ++ ++ uint64_t g1_start = __condvar_load_g1_start_relaxed (cond) >> 1; ++ if (g1_start > seq) ++ { ++ /* Our group is closed, so someone provided enough signals for it. ++ Thus, we effectively consumed a signal. */ ++ consumed_signal = true; ++ } ++ else + { +- /* This thread is not waiting anymore. Adjust the sequence counters +- appropriately. We do not increment WAKEUP_SEQ if this would +- bump it over the value of TOTAL_SEQ. This can happen if a thread +- was woken and then canceled. */ +- if (cbuffer->cond->__data.__wakeup_seq +- < cbuffer->cond->__data.__total_seq) ++ if (g1_start + __condvar_get_orig_size (cond) <= seq) ++ { ++ /* We are in the current G2 and thus cannot have consumed a signal. ++ Reduce its effective size or handle overflow. Remember that in ++ G2, unsigned int size is zero or a negative value. */ ++ if (cond->__data.__g_size[g] + __PTHREAD_COND_MAX_GROUP_SIZE > 0) ++ { ++ cond->__data.__g_size[g]--; ++ } ++ else ++ { ++ /* Cancellations would overflow the maximum group size. Just ++ wake up everyone spuriously to create a clean state. This ++ also means we do not consume a signal someone else sent. */ ++ __condvar_release_lock (cond, private); ++ __pthread_cond_broadcast (cond); ++ return; ++ } ++ } ++ else + { +- ++cbuffer->cond->__data.__wakeup_seq; +- ++cbuffer->cond->__data.__futex; ++ /* We are in current G1. If the group's size is zero, someone put ++ a signal in the group that nobody else but us can consume. */ ++ if (cond->__data.__g_size[g] == 0) ++ consumed_signal = true; ++ else ++ { ++ /* Otherwise, we decrease the size of the group. This is ++ equivalent to atomically putting in a signal just for us and ++ consuming it right away. We do not consume a signal sent ++ by someone else. We also cannot have consumed a futex ++ wake-up because if we were cancelled or timed out in a futex ++ call, the futex will wake another waiter. */ ++ cond->__data.__g_size[g]--; ++ } + } +- ++cbuffer->cond->__data.__woken_seq; + } + +- cbuffer->cond->__data.__nwaiters -= 1 << COND_NWAITERS_SHIFT; ++ __condvar_release_lock (cond, private); + +- /* If pthread_cond_destroy was called on this variable already, +- notify the pthread_cond_destroy caller all waiters have left +- and it can be successfully destroyed. */ +- destroying = 0; +- if (cbuffer->cond->__data.__total_seq == -1ULL +- && cbuffer->cond->__data.__nwaiters < (1 << COND_NWAITERS_SHIFT)) ++ if (consumed_signal) + { +- lll_futex_wake (&cbuffer->cond->__data.__nwaiters, 1, pshared); +- destroying = 1; ++ /* We effectively consumed a signal even though we didn't want to. ++ Therefore, we need to send a replacement signal. ++ If we would want to optimize this, we could do what ++ pthread_cond_signal does right in the critical section above. */ ++ __pthread_cond_signal (cond); + } ++} + +- /* We are done. */ +- lll_unlock (cbuffer->cond->__data.__lock, pshared); +- +- /* Wake everybody to make sure no condvar signal gets lost. */ +- if (! destroying) +- lll_futex_wake (&cbuffer->cond->__data.__futex, INT_MAX, pshared); +- +- /* Get the mutex before returning unless asynchronous cancellation +- is in effect. We don't try to get the mutex if we already own it. */ +- if (!(USE_REQUEUE_PI (cbuffer->mutex)) +- || ((cbuffer->mutex->__data.__lock & FUTEX_TID_MASK) +- != THREAD_GETMEM (THREAD_SELF, tid))) +- { +- __pthread_mutex_cond_lock (cbuffer->mutex); +- } +- else +- __pthread_mutex_cond_lock_adjust (cbuffer->mutex); ++/* Wake up any signalers that might be waiting. */ ++static void ++__condvar_dec_grefs (pthread_cond_t *cond, unsigned int g, int private) ++{ ++ /* Release MO to synchronize-with the acquire load in ++ __condvar_quiesce_and_switch_g1. */ ++ if (atomic_fetch_add_release (cond->__data.__g_refs + g, -2) == 3) ++ { ++ /* Clear the wake-up request flag before waking up. We do not need more ++ than relaxed MO and it doesn't matter if we apply this for an aliased ++ group because we wake all futex waiters right after clearing the ++ flag. */ ++ atomic_fetch_and_relaxed (cond->__data.__g_refs + g, ~(unsigned int) 1); ++ futex_wake (cond->__data.__g_refs + g, INT_MAX, private); ++ } + } + ++/* Clean-up for cancellation of waiters waiting for normal signals. We cancel ++ our registration as a waiter, confirm we have woken up, and re-acquire the ++ mutex. */ ++static void ++__condvar_cleanup_waiting (void *arg) ++{ ++ struct _condvar_cleanup_buffer *cbuffer = ++ (struct _condvar_cleanup_buffer *) arg; ++ pthread_cond_t *cond = cbuffer->cond; ++ unsigned g = cbuffer->wseq & 1; + +-int +-__pthread_cond_wait (pthread_cond_t *cond, pthread_mutex_t *mutex) ++ __condvar_dec_grefs (cond, g, cbuffer->private); ++ ++ __condvar_cancel_waiting (cond, cbuffer->wseq >> 1, g, cbuffer->private); ++ /* FIXME With the current cancellation implementation, it is possible that ++ a thread is cancelled after it has returned from a syscall. This could ++ result in a cancelled waiter consuming a futex wake-up that is then ++ causing another waiter in the same group to not wake up. To work around ++ this issue until we have fixed cancellation, just add a futex wake-up ++ conservatively. */ ++ futex_wake (cond->__data.__g_signals + g, 1, cbuffer->private); ++ ++ __condvar_confirm_wakeup (cond, cbuffer->private); ++ ++ /* XXX If locking the mutex fails, should we just stop execution? This ++ might be better than silently ignoring the error. */ ++ __pthread_mutex_cond_lock (cbuffer->mutex); ++} ++ ++/* This condvar implementation guarantees that all calls to signal and ++ broadcast and all of the three virtually atomic parts of each call to wait ++ (i.e., (1) releasing the mutex and blocking, (2) unblocking, and (3) re- ++ acquiring the mutex) happen in some total order that is consistent with the ++ happens-before relations in the calling program. However, this order does ++ not necessarily result in additional happens-before relations being ++ established (which aligns well with spurious wake-ups being allowed). ++ ++ All waiters acquire a certain position in a 64b waiter sequence (__wseq). ++ This sequence determines which waiters are allowed to consume signals. ++ A broadcast is equal to sending as many signals as are unblocked waiters. ++ When a signal arrives, it samples the current value of __wseq with a ++ relaxed-MO load (i.e., the position the next waiter would get). (This is ++ sufficient because it is consistent with happens-before; the caller can ++ enforce stronger ordering constraints by calling signal while holding the ++ mutex.) Only waiters with a position less than the __wseq value observed ++ by the signal are eligible to consume this signal. ++ ++ This would be straight-forward to implement if waiters would just spin but ++ we need to let them block using futexes. Futexes give no guarantee of ++ waking in FIFO order, so we cannot reliably wake eligible waiters if we ++ just use a single futex. Also, futex words are 32b in size, but we need ++ to distinguish more than 1<<32 states because we need to represent the ++ order of wake-up (and thus which waiters are eligible to consume signals); ++ blocking in a futex is not atomic with a waiter determining its position in ++ the waiter sequence, so we need the futex word to reliably notify waiters ++ that they should not attempt to block anymore because they have been ++ already signaled in the meantime. While an ABA issue on a 32b value will ++ be rare, ignoring it when we are aware of it is not the right thing to do ++ either. ++ ++ Therefore, we use a 64b counter to represent the waiter sequence (on ++ architectures which only support 32b atomics, we use a few bits less). ++ To deal with the blocking using futexes, we maintain two groups of waiters: ++ * Group G1 consists of waiters that are all eligible to consume signals; ++ incoming signals will always signal waiters in this group until all ++ waiters in G1 have been signaled. ++ * Group G2 consists of waiters that arrive when a G1 is present and still ++ contains waiters that have not been signaled. When all waiters in G1 ++ are signaled and a new signal arrives, the new signal will convert G2 ++ into the new G1 and create a new G2 for future waiters. ++ ++ We cannot allocate new memory because of process-shared condvars, so we ++ have just two slots of groups that change their role between G1 and G2. ++ Each has a separate futex word, a number of signals available for ++ consumption, a size (number of waiters in the group that have not been ++ signaled), and a reference count. ++ ++ The group reference count is used to maintain the number of waiters that ++ are using the group's futex. Before a group can change its role, the ++ reference count must show that no waiters are using the futex anymore; this ++ prevents ABA issues on the futex word. ++ ++ To represent which intervals in the waiter sequence the groups cover (and ++ thus also which group slot contains G1 or G2), we use a 64b counter to ++ designate the start position of G1 (inclusive), and a single bit in the ++ waiter sequence counter to represent which group slot currently contains ++ G2. This allows us to switch group roles atomically wrt. waiters obtaining ++ a position in the waiter sequence. The G1 start position allows waiters to ++ figure out whether they are in a group that has already been completely ++ signaled (i.e., if the current G1 starts at a later position that the ++ waiter's position). Waiters cannot determine whether they are currently ++ in G2 or G1 -- but they do not have too because all they are interested in ++ is whether there are available signals, and they always start in G2 (whose ++ group slot they know because of the bit in the waiter sequence. Signalers ++ will simply fill the right group until it is completely signaled and can ++ be closed (they do not switch group roles until they really have to to ++ decrease the likelihood of having to wait for waiters still holding a ++ reference on the now-closed G1). ++ ++ Signalers maintain the initial size of G1 to be able to determine where ++ G2 starts (G2 is always open-ended until it becomes G1). They track the ++ remaining size of a group; when waiters cancel waiting (due to PThreads ++ cancellation or timeouts), they will decrease this remaining size as well. ++ ++ To implement condvar destruction requirements (i.e., that ++ pthread_cond_destroy can be called as soon as all waiters have been ++ signaled), waiters increment a reference count before starting to wait and ++ decrement it after they stopped waiting but right before they acquire the ++ mutex associated with the condvar. ++ ++ pthread_cond_t thus consists of the following (bits that are used for ++ flags and are not part of the primary value of each field but necessary ++ to make some things atomic or because there was no space for them ++ elsewhere in the data structure): ++ ++ __wseq: Waiter sequence counter ++ * LSB is index of current G2. ++ * Waiters fetch-add while having acquire the mutex associated with the ++ condvar. Signalers load it and fetch-xor it concurrently. ++ __g1_start: Starting position of G1 (inclusive) ++ * LSB is index of current G2. ++ * Modified by signalers while having acquired the condvar-internal lock ++ and observed concurrently by waiters. ++ __g1_orig_size: Initial size of G1 ++ * The two least-significant bits represent the condvar-internal lock. ++ * Only accessed while having acquired the condvar-internal lock. ++ __wrefs: Waiter reference counter. ++ * Bit 2 is true if waiters should run futex_wake when they remove the ++ last reference. pthread_cond_destroy uses this as futex word. ++ * Bit 1 is the clock ID (0 == CLOCK_REALTIME, 1 == CLOCK_MONOTONIC). ++ * Bit 0 is true iff this is a process-shared condvar. ++ * Simple reference count used by both waiters and pthread_cond_destroy. ++ (If the format of __wrefs is changed, update nptl_lock_constants.pysym ++ and the pretty printers.) ++ For each of the two groups, we have: ++ __g_refs: Futex waiter reference count. ++ * LSB is true if waiters should run futex_wake when they remove the ++ last reference. ++ * Reference count used by waiters concurrently with signalers that have ++ acquired the condvar-internal lock. ++ __g_signals: The number of signals that can still be consumed. ++ * Used as a futex word by waiters. Used concurrently by waiters and ++ signalers. ++ * LSB is true iff this group has been completely signaled (i.e., it is ++ closed). ++ __g_size: Waiters remaining in this group (i.e., which have not been ++ signaled yet. ++ * Accessed by signalers and waiters that cancel waiting (both do so only ++ when having acquired the condvar-internal lock. ++ * The size of G2 is always zero because it cannot be determined until ++ the group becomes G1. ++ * Although this is of unsigned type, we rely on using unsigned overflow ++ rules to make this hold effectively negative values too (in ++ particular, when waiters in G2 cancel waiting). ++ ++ A PTHREAD_COND_INITIALIZER condvar has all fields set to zero, which yields ++ a condvar that has G2 starting at position 0 and a G1 that is closed. ++ ++ Because waiters do not claim ownership of a group right when obtaining a ++ position in __wseq but only reference count the group when using futexes ++ to block, it can happen that a group gets closed before a waiter can ++ increment the reference count. Therefore, waiters have to check whether ++ their group is already closed using __g1_start. They also have to perform ++ this check when spinning when trying to grab a signal from __g_signals. ++ Note that for these checks, using relaxed MO to load __g1_start is ++ sufficient because if a waiter can see a sufficiently large value, it could ++ have also consume a signal in the waiters group. ++ ++ Waiters try to grab a signal from __g_signals without holding a reference ++ count, which can lead to stealing a signal from a more recent group after ++ their own group was already closed. They cannot always detect whether they ++ in fact did because they do not know when they stole, but they can ++ conservatively add a signal back to the group they stole from; if they ++ did so unnecessarily, all that happens is a spurious wake-up. To make this ++ even less likely, __g1_start contains the index of the current g2 too, ++ which allows waiters to check if there aliasing on the group slots; if ++ there wasn't, they didn't steal from the current G1, which means that the ++ G1 they stole from must have been already closed and they do not need to ++ fix anything. ++ ++ It is essential that the last field in pthread_cond_t is __g_signals[1]: ++ The previous condvar used a pointer-sized field in pthread_cond_t, so a ++ PTHREAD_COND_INITIALIZER from that condvar implementation might only ++ initialize 4 bytes to zero instead of the 8 bytes we need (i.e., 44 bytes ++ in total instead of the 48 we need). __g_signals[1] is not accessed before ++ the first group switch (G2 starts at index 0), which will set its value to ++ zero after a harmless fetch-or whose return value is ignored. This ++ effectively completes initialization. ++ ++ ++ Limitations: ++ * This condvar isn't designed to allow for more than ++ __PTHREAD_COND_MAX_GROUP_SIZE * (1 << 31) calls to __pthread_cond_wait. ++ * More than __PTHREAD_COND_MAX_GROUP_SIZE concurrent waiters are not ++ supported. ++ * Beyond what is allowed as errors by POSIX or documented, we can also ++ return the following errors: ++ * EPERM if MUTEX is a recursive mutex and the caller doesn't own it. ++ * EOWNERDEAD or ENOTRECOVERABLE when using robust mutexes. Unlike ++ for other errors, this can happen when we re-acquire the mutex; this ++ isn't allowed by POSIX (which requires all errors to virtually happen ++ before we release the mutex or change the condvar state), but there's ++ nothing we can do really. ++ * When using PTHREAD_MUTEX_PP_* mutexes, we can also return all errors ++ returned by __pthread_tpp_change_priority. We will already have ++ released the mutex in such cases, so the caller cannot expect to own ++ MUTEX. ++ ++ Other notes: ++ * Instead of the normal mutex unlock / lock functions, we use ++ __pthread_mutex_unlock_usercnt(m, 0) / __pthread_mutex_cond_lock(m) ++ because those will not change the mutex-internal users count, so that it ++ can be detected when a condvar is still associated with a particular ++ mutex because there is a waiter blocked on this condvar using this mutex. ++*/ ++static __always_inline int ++__pthread_cond_wait_common (pthread_cond_t *cond, pthread_mutex_t *mutex, ++ const struct timespec *abstime) + { +- struct _pthread_cleanup_buffer buffer; +- struct _condvar_cleanup_buffer cbuffer; ++ const int maxspin = 0; + int err; +- int pshared = (cond->__data.__mutex == (void *) ~0l) +- ? LLL_SHARED : LLL_PRIVATE; +- +-#if (defined lll_futex_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- int pi_flag = 0; +-#endif ++ int result = 0; + + LIBC_PROBE (cond_wait, 2, cond, mutex); + +- /* Make sure we are alone. */ +- lll_lock (cond->__data.__lock, pshared); +- +- /* Now we can release the mutex. */ ++ /* Acquire a position (SEQ) in the waiter sequence (WSEQ). We use an ++ atomic operation because signals and broadcasts may update the group ++ switch without acquiring the mutex. We do not need release MO here ++ because we do not need to establish any happens-before relation with ++ signalers (see __pthread_cond_signal); modification order alone ++ establishes a total order of waiters/signals. We do need acquire MO ++ to synchronize with group reinitialization in ++ __condvar_quiesce_and_switch_g1. */ ++ uint64_t wseq = __condvar_fetch_add_wseq_acquire (cond, 2); ++ /* Find our group's index. We always go into what was G2 when we acquired ++ our position. */ ++ unsigned int g = wseq & 1; ++ uint64_t seq = wseq >> 1; ++ ++ /* Increase the waiter reference count. Relaxed MO is sufficient because ++ we only need to synchronize when decrementing the reference count. */ ++ unsigned int flags = atomic_fetch_add_relaxed (&cond->__data.__wrefs, 8); ++ int private = __condvar_get_private (flags); ++ ++ /* Now that we are registered as a waiter, we can release the mutex. ++ Waiting on the condvar must be atomic with releasing the mutex, so if ++ the mutex is used to establish a happens-before relation with any ++ signaler, the waiter must be visible to the latter; thus, we release the ++ mutex after registering as waiter. ++ If releasing the mutex fails, we just cancel our registration as a ++ waiter and confirm that we have woken up. */ + err = __pthread_mutex_unlock_usercnt (mutex, 0); +- if (__glibc_unlikely (err)) ++ if (__glibc_unlikely (err != 0)) + { +- lll_unlock (cond->__data.__lock, pshared); ++ __condvar_cancel_waiting (cond, seq, g, private); ++ __condvar_confirm_wakeup (cond, private); + return err; + } + +- /* We have one new user of the condvar. */ +- ++cond->__data.__total_seq; +- ++cond->__data.__futex; +- cond->__data.__nwaiters += 1 << COND_NWAITERS_SHIFT; +- +- /* Remember the mutex we are using here. If there is already a +- different address store this is a bad user bug. Do not store +- anything for pshared condvars. */ +- if (cond->__data.__mutex != (void *) ~0l) +- cond->__data.__mutex = mutex; +- +- /* Prepare structure passed to cancellation handler. */ +- cbuffer.cond = cond; +- cbuffer.mutex = mutex; +- +- /* Before we block we enable cancellation. Therefore we have to +- install a cancellation handler. */ +- __pthread_cleanup_push (&buffer, __condvar_cleanup, &cbuffer); +- +- /* The current values of the wakeup counter. The "woken" counter +- must exceed this value. */ +- unsigned long long int val; +- unsigned long long int seq; +- val = seq = cond->__data.__wakeup_seq; +- /* Remember the broadcast counter. */ +- cbuffer.bc_seq = cond->__data.__broadcast_seq; ++ /* Now wait until a signal is available in our group or it is closed. ++ Acquire MO so that if we observe a value of zero written after group ++ switching in __condvar_quiesce_and_switch_g1, we synchronize with that ++ store and will see the prior update of __g1_start done while switching ++ groups too. */ ++ unsigned int signals = atomic_load_acquire (cond->__data.__g_signals + g); + + do + { +- unsigned int futex_val = cond->__data.__futex; +- /* Prepare to wait. Release the condvar futex. */ +- lll_unlock (cond->__data.__lock, pshared); +- +- /* Enable asynchronous cancellation. Required by the standard. */ +- cbuffer.oldtype = __pthread_enable_asynccancel (); +- +-#if (defined lll_futex_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- /* If pi_flag remained 1 then it means that we had the lock and the mutex +- but a spurious waker raced ahead of us. Give back the mutex before +- going into wait again. */ +- if (pi_flag) ++ while (1) + { +- __pthread_mutex_cond_lock_adjust (mutex); +- __pthread_mutex_unlock_usercnt (mutex, 0); ++ /* Spin-wait first. ++ Note that spinning first without checking whether a timeout ++ passed might lead to what looks like a spurious wake-up even ++ though we should return ETIMEDOUT (e.g., if the caller provides ++ an absolute timeout that is clearly in the past). However, ++ (1) spurious wake-ups are allowed, (2) it seems unlikely that a ++ user will (ab)use pthread_cond_wait as a check for whether a ++ point in time is in the past, and (3) spinning first without ++ having to compare against the current time seems to be the right ++ choice from a performance perspective for most use cases. */ ++ unsigned int spin = maxspin; ++ while (signals == 0 && spin > 0) ++ { ++ /* Check that we are not spinning on a group that's already ++ closed. */ ++ if (seq < (__condvar_load_g1_start_relaxed (cond) >> 1)) ++ goto done; ++ ++ /* TODO Back off. */ ++ ++ /* Reload signals. See above for MO. */ ++ signals = atomic_load_acquire (cond->__data.__g_signals + g); ++ spin--; ++ } ++ ++ /* If our group will be closed as indicated by the flag on signals, ++ don't bother grabbing a signal. */ ++ if (signals & 1) ++ goto done; ++ ++ /* If there is an available signal, don't block. */ ++ if (signals != 0) ++ break; ++ ++ /* No signals available after spinning, so prepare to block. ++ We first acquire a group reference and use acquire MO for that so ++ that we synchronize with the dummy read-modify-write in ++ __condvar_quiesce_and_switch_g1 if we read from that. In turn, ++ in this case this will make us see the closed flag on __g_signals ++ that designates a concurrent attempt to reuse the group's slot. ++ We use acquire MO for the __g_signals check to make the ++ __g1_start check work (see spinning above). ++ Note that the group reference acquisition will not mask the ++ release MO when decrementing the reference count because we use ++ an atomic read-modify-write operation and thus extend the release ++ sequence. */ ++ atomic_fetch_add_acquire (cond->__data.__g_refs + g, 2); ++ if (((atomic_load_acquire (cond->__data.__g_signals + g) & 1) != 0) ++ || (seq < (__condvar_load_g1_start_relaxed (cond) >> 1))) ++ { ++ /* Our group is closed. Wake up any signalers that might be ++ waiting. */ ++ __condvar_dec_grefs (cond, g, private); ++ goto done; ++ } ++ ++ // Now block. ++ struct _pthread_cleanup_buffer buffer; ++ struct _condvar_cleanup_buffer cbuffer; ++ cbuffer.wseq = wseq; ++ cbuffer.cond = cond; ++ cbuffer.mutex = mutex; ++ cbuffer.private = private; ++ __pthread_cleanup_push (&buffer, __condvar_cleanup_waiting, &cbuffer); ++ ++ if (abstime == NULL) ++ { ++ /* Block without a timeout. */ ++ err = futex_wait_cancelable ( ++ cond->__data.__g_signals + g, 0, private); ++ } ++ else ++ { ++ /* Block, but with a timeout. ++ Work around the fact that the kernel rejects negative timeout ++ values despite them being valid. */ ++ if (__glibc_unlikely (abstime->tv_sec < 0)) ++ err = ETIMEDOUT; ++ ++ else if ((flags & __PTHREAD_COND_CLOCK_MONOTONIC_MASK) != 0) ++ { ++ /* CLOCK_MONOTONIC is requested. */ ++ struct timespec rt; ++ if (__clock_gettime (CLOCK_MONOTONIC, &rt) != 0) ++ __libc_fatal ("clock_gettime does not support " ++ "CLOCK_MONOTONIC"); ++ /* Convert the absolute timeout value to a relative ++ timeout. */ ++ rt.tv_sec = abstime->tv_sec - rt.tv_sec; ++ rt.tv_nsec = abstime->tv_nsec - rt.tv_nsec; ++ if (rt.tv_nsec < 0) ++ { ++ rt.tv_nsec += 1000000000; ++ --rt.tv_sec; ++ } ++ /* Did we already time out? */ ++ if (__glibc_unlikely (rt.tv_sec < 0)) ++ err = ETIMEDOUT; ++ else ++ err = futex_reltimed_wait_cancelable ++ (cond->__data.__g_signals + g, 0, &rt, private); ++ } ++ else ++ { ++ /* Use CLOCK_REALTIME. */ ++ err = futex_abstimed_wait_cancelable ++ (cond->__data.__g_signals + g, 0, abstime, private); ++ } ++ } ++ ++ __pthread_cleanup_pop (&buffer, 0); ++ ++ if (__glibc_unlikely (err == ETIMEDOUT)) ++ { ++ __condvar_dec_grefs (cond, g, private); ++ /* If we timed out, we effectively cancel waiting. Note that ++ we have decremented __g_refs before cancellation, so that a ++ deadlock between waiting for quiescence of our group in ++ __condvar_quiesce_and_switch_g1 and us trying to acquire ++ the lock during cancellation is not possible. */ ++ __condvar_cancel_waiting (cond, seq, g, private); ++ result = ETIMEDOUT; ++ goto done; ++ } ++ else ++ __condvar_dec_grefs (cond, g, private); ++ ++ /* Reload signals. See above for MO. */ ++ signals = atomic_load_acquire (cond->__data.__g_signals + g); + } +- pi_flag = USE_REQUEUE_PI (mutex); + +- if (pi_flag) ++ } ++ /* Try to grab a signal. Use acquire MO so that we see an up-to-date value ++ of __g1_start below (see spinning above for a similar case). In ++ particular, if we steal from a more recent group, we will also see a ++ more recent __g1_start below. */ ++ while (!atomic_compare_exchange_weak_acquire (cond->__data.__g_signals + g, ++ &signals, signals - 2)); ++ ++ /* We consumed a signal but we could have consumed from a more recent group ++ that aliased with ours due to being in the same group slot. If this ++ might be the case our group must be closed as visible through ++ __g1_start. */ ++ uint64_t g1_start = __condvar_load_g1_start_relaxed (cond); ++ if (seq < (g1_start >> 1)) ++ { ++ /* We potentially stole a signal from a more recent group but we do not ++ know which group we really consumed from. ++ We do not care about groups older than current G1 because they are ++ closed; we could have stolen from these, but then we just add a ++ spurious wake-up for the current groups. ++ We will never steal a signal from current G2 that was really intended ++ for G2 because G2 never receives signals (until it becomes G1). We ++ could have stolen a signal from G2 that was conservatively added by a ++ previous waiter that also thought it stole a signal -- but given that ++ that signal was added unnecessarily, it's not a problem if we steal ++ it. ++ Thus, the remaining case is that we could have stolen from the current ++ G1, where "current" means the __g1_start value we observed. However, ++ if the current G1 does not have the same slot index as we do, we did ++ not steal from it and do not need to undo that. This is the reason ++ for putting a bit with G2's index into__g1_start as well. */ ++ if (((g1_start & 1) ^ 1) == g) + { +- err = lll_futex_wait_requeue_pi (&cond->__data.__futex, +- futex_val, &mutex->__data.__lock, +- pshared); +- +- pi_flag = (err == 0); ++ /* We have to conservatively undo our potential mistake of stealing ++ a signal. We can stop trying to do that when the current G1 ++ changes because other spinning waiters will notice this too and ++ __condvar_quiesce_and_switch_g1 has checked that there are no ++ futex waiters anymore before switching G1. ++ Relaxed MO is fine for the __g1_start load because we need to ++ merely be able to observe this fact and not have to observe ++ something else as well. ++ ??? Would it help to spin for a little while to see whether the ++ current G1 gets closed? This might be worthwhile if the group is ++ small or close to being closed. */ ++ unsigned int s = atomic_load_relaxed (cond->__data.__g_signals + g); ++ while (__condvar_load_g1_start_relaxed (cond) == g1_start) ++ { ++ /* Try to add a signal. We don't need to acquire the lock ++ because at worst we can cause a spurious wake-up. If the ++ group is in the process of being closed (LSB is true), this ++ has an effect similar to us adding a signal. */ ++ if (((s & 1) != 0) ++ || atomic_compare_exchange_weak_relaxed ++ (cond->__data.__g_signals + g, &s, s + 2)) ++ { ++ /* If we added a signal, we also need to add a wake-up on ++ the futex. We also need to do that if we skipped adding ++ a signal because the group is being closed because ++ while __condvar_quiesce_and_switch_g1 could have closed ++ the group, it might stil be waiting for futex waiters to ++ leave (and one of those waiters might be the one we stole ++ the signal from, which cause it to block using the ++ futex). */ ++ futex_wake (cond->__data.__g_signals + g, 1, private); ++ break; ++ } ++ /* TODO Back off. */ ++ } + } +- else +-#endif +- /* Wait until woken by signal or broadcast. */ +- lll_futex_wait (&cond->__data.__futex, futex_val, pshared); +- +- /* Disable asynchronous cancellation. */ +- __pthread_disable_asynccancel (cbuffer.oldtype); +- +- /* We are going to look at shared data again, so get the lock. */ +- lll_lock (cond->__data.__lock, pshared); +- +- /* If a broadcast happened, we are done. */ +- if (cbuffer.bc_seq != cond->__data.__broadcast_seq) +- goto bc_out; +- +- /* Check whether we are eligible for wakeup. */ +- val = cond->__data.__wakeup_seq; + } +- while (val == seq || cond->__data.__woken_seq == val); + +- /* Another thread woken up. */ +- ++cond->__data.__woken_seq; ++ done: + +- bc_out: ++ /* Confirm that we have been woken. We do that before acquiring the mutex ++ to allow for execution of pthread_cond_destroy while having acquired the ++ mutex. */ ++ __condvar_confirm_wakeup (cond, private); + +- cond->__data.__nwaiters -= 1 << COND_NWAITERS_SHIFT; +- +- /* If pthread_cond_destroy was called on this varaible already, +- notify the pthread_cond_destroy caller all waiters have left +- and it can be successfully destroyed. */ +- if (cond->__data.__total_seq == -1ULL +- && cond->__data.__nwaiters < (1 << COND_NWAITERS_SHIFT)) +- lll_futex_wake (&cond->__data.__nwaiters, 1, pshared); ++ /* Woken up; now re-acquire the mutex. If this doesn't fail, return RESULT, ++ which is set to ETIMEDOUT if a timeout occured, or zero otherwise. */ ++ err = __pthread_mutex_cond_lock (mutex); ++ /* XXX Abort on errors that are disallowed by POSIX? */ ++ return (err != 0) ? err : result; ++} + +- /* We are done with the condvar. */ +- lll_unlock (cond->__data.__lock, pshared); + +- /* The cancellation handling is back to normal, remove the handler. */ +- __pthread_cleanup_pop (&buffer, 0); ++/* See __pthread_cond_wait_common. */ ++int ++__pthread_cond_wait (pthread_cond_t *cond, pthread_mutex_t *mutex) ++{ ++ return __pthread_cond_wait_common (cond, mutex, NULL); ++} + +- /* Get the mutex before returning. Not needed for PI. */ +-#if (defined lll_futex_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +- if (pi_flag) +- { +- __pthread_mutex_cond_lock_adjust (mutex); +- return 0; +- } +- else +-#endif +- return __pthread_mutex_cond_lock (mutex); ++/* See __pthread_cond_wait_common. */ ++int ++__pthread_cond_timedwait (pthread_cond_t *cond, pthread_mutex_t *mutex, ++ const struct timespec *abstime) ++{ ++ /* Check parameter validity. This should also tell the compiler that ++ it can assume that abstime is not NULL. */ ++ if (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000) ++ return EINVAL; ++ return __pthread_cond_wait_common (cond, mutex, abstime); + } + + versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait, + GLIBC_2_3_2); ++versioned_symbol (libpthread, __pthread_cond_timedwait, pthread_cond_timedwait, ++ GLIBC_2_3_2); +diff --git a/nptl/pthread_condattr_getclock.c b/nptl/pthread_condattr_getclock.c +index d156302..cecb4aa 100644 +--- a/nptl/pthread_condattr_getclock.c ++++ b/nptl/pthread_condattr_getclock.c +@@ -23,6 +23,6 @@ int + pthread_condattr_getclock (const pthread_condattr_t *attr, clockid_t *clock_id) + { + *clock_id = (((((const struct pthread_condattr *) attr)->value) >> 1) +- & ((1 << COND_NWAITERS_SHIFT) - 1)); ++ & ((1 << COND_CLOCK_BITS) - 1)); + return 0; + } +diff --git a/nptl/pthread_condattr_getpshared.c b/nptl/pthread_condattr_getpshared.c +index 5a10f3e..8147966 100644 +--- a/nptl/pthread_condattr_getpshared.c ++++ b/nptl/pthread_condattr_getpshared.c +@@ -22,7 +22,8 @@ + int + pthread_condattr_getpshared (const pthread_condattr_t *attr, int *pshared) + { +- *pshared = ((const struct pthread_condattr *) attr)->value & 1; ++ *pshared = (((const struct pthread_condattr *) attr)->value & 1 ++ ? PTHREAD_PROCESS_SHARED : PTHREAD_PROCESS_PRIVATE); + + return 0; + } +diff --git a/nptl/pthread_condattr_init.c b/nptl/pthread_condattr_init.c +index 0ce42e5..6e5168d 100644 +--- a/nptl/pthread_condattr_init.c ++++ b/nptl/pthread_condattr_init.c +@@ -23,7 +23,9 @@ + int + __pthread_condattr_init (pthread_condattr_t *attr) + { +- memset (attr, '\0', sizeof (*attr)); ++ struct pthread_condattr *iattr = (struct pthread_condattr *) attr; ++ /* Default is not pshared and CLOCK_REALTIME. */ ++ iattr-> value = CLOCK_REALTIME << 1; + + return 0; + } +diff --git a/nptl/pthread_condattr_setclock.c b/nptl/pthread_condattr_setclock.c +index 25e2a17..3cfad84 100644 +--- a/nptl/pthread_condattr_setclock.c ++++ b/nptl/pthread_condattr_setclock.c +@@ -18,7 +18,7 @@ + + #include <assert.h> + #include <errno.h> +-#include <stdbool.h> ++#include <futex-internal.h> + #include <time.h> + #include <sysdep.h> + #include "pthreadP.h" +@@ -33,12 +33,17 @@ pthread_condattr_setclock (pthread_condattr_t *attr, clockid_t clock_id) + in the pthread_cond_t structure needs to be adjusted. */ + return EINVAL; + ++ /* If we do not support waiting using CLOCK_MONOTONIC, return an error. */ ++ if (clock_id == CLOCK_MONOTONIC ++ && !futex_supports_exact_relative_timeouts()) ++ return ENOTSUP; ++ + /* Make sure the value fits in the bits we reserved. */ +- assert (clock_id < (1 << COND_NWAITERS_SHIFT)); ++ assert (clock_id < (1 << COND_CLOCK_BITS)); + + int *valuep = &((struct pthread_condattr *) attr)->value; + +- *valuep = ((*valuep & ~(((1 << COND_NWAITERS_SHIFT) - 1) << 1)) ++ *valuep = ((*valuep & ~(((1 << COND_CLOCK_BITS) - 1) << 1)) + | (clock_id << 1)); + + return 0; +diff --git a/nptl/test-cond-printers.py b/nptl/test-cond-printers.py +index af0e12e..9e807c9 100644 +--- a/nptl/test-cond-printers.py ++++ b/nptl/test-cond-printers.py +@@ -35,7 +35,7 @@ try: + + break_at(test_source, 'Test status (destroyed)') + continue_cmd() # Go to test_status_destroyed +- test_printer(var, to_string, {'Status': 'Destroyed'}) ++ test_printer(var, to_string, {'Threads known to still execute a wait function': '0'}) + + continue_cmd() # Exit + +diff --git a/nptl/tst-cond1.c b/nptl/tst-cond1.c +index 75ab9c8..509bbd0 100644 +--- a/nptl/tst-cond1.c ++++ b/nptl/tst-cond1.c +@@ -73,6 +73,9 @@ do_test (void) + + puts ("parent: wait for condition"); + ++ /* This test will fail on spurious wake-ups, which are allowed; however, ++ the current implementation shouldn't produce spurious wake-ups in the ++ scenario we are testing here. */ + err = pthread_cond_wait (&cond, &mut); + if (err != 0) + error (EXIT_FAILURE, err, "parent: cannot wait fir signal"); +diff --git a/nptl/tst-cond20.c b/nptl/tst-cond20.c +index 918c4ad..665a66a 100644 +--- a/nptl/tst-cond20.c ++++ b/nptl/tst-cond20.c +@@ -96,7 +96,10 @@ do_test (void) + + for (i = 0; i < ROUNDS; ++i) + { +- pthread_cond_wait (&cond2, &mut); ++ /* Make sure we discard spurious wake-ups. */ ++ do ++ pthread_cond_wait (&cond2, &mut); ++ while (count != N); + + if (i & 1) + pthread_mutex_unlock (&mut); +diff --git a/nptl/tst-cond22.c b/nptl/tst-cond22.c +index bd978e5..64f19ea 100644 +--- a/nptl/tst-cond22.c ++++ b/nptl/tst-cond22.c +@@ -106,10 +106,11 @@ do_test (void) + status = 1; + } + +- printf ("cond = { %d, %x, %lld, %lld, %lld, %p, %u, %u }\n", +- c.__data.__lock, c.__data.__futex, c.__data.__total_seq, +- c.__data.__wakeup_seq, c.__data.__woken_seq, c.__data.__mutex, +- c.__data.__nwaiters, c.__data.__broadcast_seq); ++ printf ("cond = { %llu, %llu, %u/%u/%u, %u/%u/%u, %u, %u }\n", ++ c.__data.__wseq, c.__data.__g1_start, ++ c.__data.__g_signals[0], c.__data.__g_refs[0], c.__data.__g_size[0], ++ c.__data.__g_signals[1], c.__data.__g_refs[1], c.__data.__g_size[1], ++ c.__data.__g1_orig_size, c.__data.__wrefs); + + if (pthread_create (&th, NULL, tf, (void *) 1l) != 0) + { +@@ -148,10 +149,11 @@ do_test (void) + status = 1; + } + +- printf ("cond = { %d, %x, %lld, %lld, %lld, %p, %u, %u }\n", +- c.__data.__lock, c.__data.__futex, c.__data.__total_seq, +- c.__data.__wakeup_seq, c.__data.__woken_seq, c.__data.__mutex, +- c.__data.__nwaiters, c.__data.__broadcast_seq); ++ printf ("cond = { %llu, %llu, %u/%u/%u, %u/%u/%u, %u, %u }\n", ++ c.__data.__wseq, c.__data.__g1_start, ++ c.__data.__g_signals[0], c.__data.__g_refs[0], c.__data.__g_size[0], ++ c.__data.__g_signals[1], c.__data.__g_refs[1], c.__data.__g_size[1], ++ c.__data.__g1_orig_size, c.__data.__wrefs); + + return status; + } +diff --git a/sysdeps/aarch64/nptl/bits/pthreadtypes.h b/sysdeps/aarch64/nptl/bits/pthreadtypes.h +index 13984a7..c6fa632 100644 +--- a/sysdeps/aarch64/nptl/bits/pthreadtypes.h ++++ b/sysdeps/aarch64/nptl/bits/pthreadtypes.h +@@ -90,17 +90,30 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; +- long int __align; ++ __extension__ long long int __align; + } pthread_cond_t; + + typedef union +diff --git a/sysdeps/arm/nptl/bits/pthreadtypes.h b/sysdeps/arm/nptl/bits/pthreadtypes.h +index afb5392..53518c6 100644 +--- a/sysdeps/arm/nptl/bits/pthreadtypes.h ++++ b/sysdeps/arm/nptl/bits/pthreadtypes.h +@@ -93,14 +93,27 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/ia64/nptl/bits/pthreadtypes.h b/sysdeps/ia64/nptl/bits/pthreadtypes.h +index f2e6dac..e72dbfd 100644 +--- a/sysdeps/ia64/nptl/bits/pthreadtypes.h ++++ b/sysdeps/ia64/nptl/bits/pthreadtypes.h +@@ -90,17 +90,30 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; +- long int __align; ++ __extension__ long long int __align; + } pthread_cond_t; + + typedef union +diff --git a/sysdeps/m68k/nptl/bits/pthreadtypes.h b/sysdeps/m68k/nptl/bits/pthreadtypes.h +index d8faa7a..c5e9021 100644 +--- a/sysdeps/m68k/nptl/bits/pthreadtypes.h ++++ b/sysdeps/m68k/nptl/bits/pthreadtypes.h +@@ -88,19 +88,33 @@ typedef union + + + /* Data structure for conditional variable handling. The structure of +- the attribute type is deliberately not exposed. */ ++ the attribute type is not exposed on purpose. */ + typedef union + { + struct + { +- int __lock __attribute__ ((__aligned__ (4))); +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ /* Enforce proper alignment of fields used as futex words. */ ++ unsigned int __g_refs[2] __attribute__ ((__aligned__ (4))); ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/microblaze/nptl/bits/pthreadtypes.h b/sysdeps/microblaze/nptl/bits/pthreadtypes.h +index 9e9e307..b6623c2 100644 +--- a/sysdeps/microblaze/nptl/bits/pthreadtypes.h ++++ b/sysdeps/microblaze/nptl/bits/pthreadtypes.h +@@ -91,14 +91,27 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/mips/nptl/bits/pthreadtypes.h b/sysdeps/mips/nptl/bits/pthreadtypes.h +index 68ed94b..7ddc7bf 100644 +--- a/sysdeps/mips/nptl/bits/pthreadtypes.h ++++ b/sysdeps/mips/nptl/bits/pthreadtypes.h +@@ -117,19 +117,32 @@ typedef union + + + /* Data structure for conditional variable handling. The structure of +- the attribute type is deliberately not exposed. */ ++ the attribute type is not exposed on purpose. */ + typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/nios2/nptl/bits/pthreadtypes.h b/sysdeps/nios2/nptl/bits/pthreadtypes.h +index 76076d0..3995e26 100644 +--- a/sysdeps/nios2/nptl/bits/pthreadtypes.h ++++ b/sysdeps/nios2/nptl/bits/pthreadtypes.h +@@ -88,19 +88,32 @@ typedef union + + + /* Data structure for conditional variable handling. The structure of +- the attribute type is deliberately not exposed. */ ++ the attribute type is not exposed on purpose. */ + typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/nptl/internaltypes.h b/sysdeps/nptl/internaltypes.h +index 203c548..31e5a43 100644 +--- a/sysdeps/nptl/internaltypes.h ++++ b/sysdeps/nptl/internaltypes.h +@@ -68,20 +68,13 @@ struct pthread_condattr + { + /* Combination of values: + +- Bit 0 : flag whether conditional variable will be sharable between +- processes. +- +- Bit 1-7: clock ID. */ ++ Bit 0 : flag whether conditional variable will be ++ sharable between processes. ++ Bit 1-COND_CLOCK_BITS: Clock ID. COND_CLOCK_BITS is the number of bits ++ needed to represent the ID of the clock. */ + int value; + }; +- +- +-/* The __NWAITERS field is used as a counter and to house the number +- of bits for other purposes. COND_CLOCK_BITS is the number +- of bits needed to represent the ID of the clock. COND_NWAITERS_SHIFT +- is the number of bits reserved for other purposes like the clock. */ +-#define COND_CLOCK_BITS 1 +-#define COND_NWAITERS_SHIFT 1 ++#define COND_CLOCK_BITS 1 + + + /* Read-write lock variable attribute data structure. */ +diff --git a/sysdeps/nptl/pthread.h b/sysdeps/nptl/pthread.h +index fd0894e..c122446 100644 +--- a/sysdeps/nptl/pthread.h ++++ b/sysdeps/nptl/pthread.h +@@ -183,7 +183,7 @@ enum + + + /* Conditional variable handling. */ +-#define PTHREAD_COND_INITIALIZER { { 0, 0, 0, 0, 0, (void *) 0, 0, 0 } } ++#define PTHREAD_COND_INITIALIZER { { {0}, {0}, {0, 0}, {0, 0}, 0, 0, {0, 0} } } + + + /* Cleanup buffers */ +diff --git a/sysdeps/s390/nptl/bits/pthreadtypes.h b/sysdeps/s390/nptl/bits/pthreadtypes.h +index 40d10fe..4e455ab 100644 +--- a/sysdeps/s390/nptl/bits/pthreadtypes.h ++++ b/sysdeps/s390/nptl/bits/pthreadtypes.h +@@ -142,14 +142,27 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/sh/nptl/bits/pthreadtypes.h b/sysdeps/sh/nptl/bits/pthreadtypes.h +index 13fbd73..065dd11 100644 +--- a/sysdeps/sh/nptl/bits/pthreadtypes.h ++++ b/sysdeps/sh/nptl/bits/pthreadtypes.h +@@ -93,14 +93,27 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/tile/nptl/bits/pthreadtypes.h b/sysdeps/tile/nptl/bits/pthreadtypes.h +index 7d68650..c12737f 100644 +--- a/sysdeps/tile/nptl/bits/pthreadtypes.h ++++ b/sysdeps/tile/nptl/bits/pthreadtypes.h +@@ -122,14 +122,27 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h b/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h +index 1a1779b..d88b045 100644 +--- a/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h ++++ b/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h +@@ -84,19 +84,32 @@ typedef union + + + /* Data structure for conditional variable handling. The structure of +- the attribute type is deliberately not exposed. */ ++ the attribute type is not exposed on purpose. */ + typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/unix/sysv/linux/hppa/internaltypes.h b/sysdeps/unix/sysv/linux/hppa/internaltypes.h +index 651ce2e..d649657 100644 +--- a/sysdeps/unix/sysv/linux/hppa/internaltypes.h ++++ b/sysdeps/unix/sysv/linux/hppa/internaltypes.h +@@ -46,32 +46,38 @@ fails because __initializer is zero, and the structure will be used as + is correctly. */ + + #define cond_compat_clear(var) \ +-({ \ +- int tmp = 0; \ +- var->__data.__lock = 0; \ +- var->__data.__futex = 0; \ +- var->__data.__mutex = NULL; \ +- /* Clear __initializer last, to indicate initialization is done. */ \ +- __asm__ __volatile__ ("stw,ma %1,0(%0)" \ +- : : "r" (&var->__data.__initializer), "r" (tmp) : "memory"); \ ++({ \ ++ int tmp = 0; \ ++ var->__data.__wseq = 0; \ ++ var->__data.__signals_sent = 0; \ ++ var->__data.__confirmed = 0; \ ++ var->__data.__generation = 0; \ ++ var->__data.__mutex = NULL; \ ++ var->__data.__quiescence_waiters = 0; \ ++ var->__data.__clockid = 0; \ ++ /* Clear __initializer last, to indicate initialization is done. */ \ ++ /* This synchronizes-with the acquire load below. */ \ ++ atomic_store_release (&var->__data.__initializer, 0); \ + }) + + #define cond_compat_check_and_clear(var) \ + ({ \ +- int ret; \ +- volatile int *value = &var->__data.__initializer; \ +- if ((ret = atomic_compare_and_exchange_val_acq(value, 2, 1))) \ ++ int v; \ ++ int *value = &var->__data.__initializer; \ ++ /* This synchronizes-with the release store above. */ \ ++ while ((v = atomic_load_acquire (value)) != 0) \ + { \ +- if (ret == 1) \ ++ if (v == 1 \ ++ /* Relaxed MO is fine; it only matters who's first. */ \ ++ && atomic_compare_exchange_acquire_weak_relaxed (value, 1, 2)) \ + { \ +- /* Initialize structure. */ \ ++ /* We're first; initialize structure. */ \ + cond_compat_clear (var); \ ++ break; \ + } \ + else \ +- { \ +- /* Yield until structure is initialized. */ \ +- while (*value == 2) sched_yield (); \ +- } \ ++ /* Yield before we re-check initialization status. */ \ ++ sched_yield (); \ + } \ + }) + +diff --git a/sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c b/sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c +deleted file mode 100644 +index ec6fd23..0000000 +--- a/sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c ++++ /dev/null +@@ -1,41 +0,0 @@ +-/* Copyright (C) 2009-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Carlos O'Donell <carlos@codesourcery.com>, 2009. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library. If not, see +- <http://www.gnu.org/licenses/>. */ +- +-#ifndef INCLUDED_SELF +-# define INCLUDED_SELF +-# include <pthread_cond_timedwait.c> +-#else +-# include <pthread.h> +-# include <pthreadP.h> +-# include <internaltypes.h> +-# include <shlib-compat.h> +-int +-__pthread_cond_timedwait (pthread_cond_t *cond, pthread_mutex_t *mutex, +- const struct timespec *abstime) +-{ +- cond_compat_check_and_clear (cond); +- return __pthread_cond_timedwait_internal (cond, mutex, abstime); +-} +-versioned_symbol (libpthread, __pthread_cond_timedwait, pthread_cond_timedwait, +- GLIBC_2_3_2); +-# undef versioned_symbol +-# define versioned_symbol(lib, local, symbol, version) +-# undef __pthread_cond_timedwait +-# define __pthread_cond_timedwait __pthread_cond_timedwait_internal +-# include_next <pthread_cond_timedwait.c> +-#endif +diff --git a/sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c b/sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c +index 8f02831..0611f7d 100644 +--- a/sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c ++++ b/sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c +@@ -32,9 +32,22 @@ __pthread_cond_wait (pthread_cond_t *cond, pthread_mutex_t *mutex) + } + versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait, + GLIBC_2_3_2); ++int ++__pthread_cond_timedwait (cond, mutex, abstime) ++ pthread_cond_t *cond; ++ pthread_mutex_t *mutex; ++ const struct timespec *abstime; ++{ ++ cond_compat_check_and_clear (cond); ++ return __pthread_cond_timedwait_internal (cond, mutex, abstime); ++} ++versioned_symbol (libpthread, __pthread_cond_timedwait, pthread_cond_timedwait, ++ GLIBC_2_3_2); + # undef versioned_symbol + # define versioned_symbol(lib, local, symbol, version) + # undef __pthread_cond_wait + # define __pthread_cond_wait __pthread_cond_wait_internal ++# undef __pthread_cond_timedwait ++# define __pthread_cond_timedwait __pthread_cond_timedwait_internal + # include_next <pthread_cond_wait.c> + #endif +diff --git a/sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S b/sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S +deleted file mode 100644 +index f697e5b..0000000 +--- a/sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S ++++ /dev/null +@@ -1,20 +0,0 @@ +-/* Copyright (C) 2003-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2003. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#define HAVE_CMOV 1 +-#include "../pthread_cond_timedwait.S" +diff --git a/sysdeps/unix/sysv/linux/i386/pthread_cond_broadcast.S b/sysdeps/unix/sysv/linux/i386/pthread_cond_broadcast.S +deleted file mode 100644 +index 5996688..0000000 +--- a/sysdeps/unix/sysv/linux/i386/pthread_cond_broadcast.S ++++ /dev/null +@@ -1,241 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <kernel-features.h> +-#include <pthread-pi-defines.h> +-#include <pthread-errnos.h> +-#include <stap-probe.h> +- +- .text +- +- /* int pthread_cond_broadcast (pthread_cond_t *cond) */ +- .globl __pthread_cond_broadcast +- .type __pthread_cond_broadcast, @function +- .align 16 +-__pthread_cond_broadcast: +- cfi_startproc +- pushl %ebx +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebx, 0) +- pushl %esi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%esi, 0) +- pushl %edi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%edi, 0) +- pushl %ebp +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebp, 0) +- cfi_remember_state +- +- movl 20(%esp), %ebx +- +- LIBC_PROBE (cond_broadcast, 1, %edx) +- +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jnz 1f +- +-2: addl $cond_futex, %ebx +- movl total_seq+4-cond_futex(%ebx), %eax +- movl total_seq-cond_futex(%ebx), %ebp +- cmpl wakeup_seq+4-cond_futex(%ebx), %eax +- ja 3f +- jb 4f +- cmpl wakeup_seq-cond_futex(%ebx), %ebp +- jna 4f +- +- /* Cause all currently waiting threads to recognize they are +- woken up. */ +-3: movl %ebp, wakeup_seq-cond_futex(%ebx) +- movl %eax, wakeup_seq-cond_futex+4(%ebx) +- movl %ebp, woken_seq-cond_futex(%ebx) +- movl %eax, woken_seq-cond_futex+4(%ebx) +- addl %ebp, %ebp +- addl $1, broadcast_seq-cond_futex(%ebx) +- movl %ebp, (%ebx) +- +- /* Get the address of the mutex used. */ +- movl dep_mutex-cond_futex(%ebx), %edi +- +- /* Unlock. */ +- LOCK +- subl $1, cond_lock-cond_futex(%ebx) +- jne 7f +- +- /* Don't use requeue for pshared condvars. */ +-8: cmpl $-1, %edi +- je 9f +- +- /* Do not use requeue for pshared condvars. */ +- testl $PS_BIT, MUTEX_KIND(%edi) +- jne 9f +- +- /* Requeue to a non-robust PI mutex if the PI bit is set and +- the robust bit is not set. */ +- movl MUTEX_KIND(%edi), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- je 81f +- +- /* Wake up all threads. */ +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $(FUTEX_CMP_REQUEUE|FUTEX_PRIVATE_FLAG), %ecx +-#else +- movl %gs:PRIVATE_FUTEX, %ecx +- orl $FUTEX_CMP_REQUEUE, %ecx +-#endif +- movl $SYS_futex, %eax +- movl $0x7fffffff, %esi +- movl $1, %edx +- /* Get the address of the futex involved. */ +-# if MUTEX_FUTEX != 0 +- addl $MUTEX_FUTEX, %edi +-# endif +-/* FIXME: Until Ingo fixes 4G/4G vDSO, 6 arg syscalls are broken for sysenter. +- ENTER_KERNEL */ +- int $0x80 +- +- /* For any kind of error, which mainly is EAGAIN, we try again +- with WAKE. The general test also covers running on old +- kernels. */ +- cmpl $0xfffff001, %eax +- jae 9f +- +-6: xorl %eax, %eax +- popl %ebp +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebp) +- popl %edi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%edi) +- popl %esi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%esi) +- popl %ebx +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebx) +- ret +- +- cfi_restore_state +- +-81: movl $(FUTEX_CMP_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %ecx +- movl $SYS_futex, %eax +- movl $0x7fffffff, %esi +- movl $1, %edx +- /* Get the address of the futex involved. */ +-# if MUTEX_FUTEX != 0 +- addl $MUTEX_FUTEX, %edi +-# endif +- int $0x80 +- +- /* For any kind of error, which mainly is EAGAIN, we try again +- with WAKE. The general test also covers running on old +- kernels. */ +- cmpl $0xfffff001, %eax +- jb 6b +- jmp 9f +- +- /* Initial locking failed. */ +-1: +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- jmp 2b +- +- .align 16 +- /* Unlock. */ +-4: LOCK +- subl $1, cond_lock-cond_futex(%ebx) +- je 6b +- +- /* Unlock in loop requires wakeup. */ +-5: leal cond_lock-cond_futex(%ebx), %eax +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 6b +- +- /* Unlock in loop requires wakeup. */ +-7: leal cond_lock-cond_futex(%ebx), %eax +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 8b +- +-9: /* The futex requeue functionality is not available. */ +- movl $0x7fffffff, %edx +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $SYS_futex, %eax +- ENTER_KERNEL +- jmp 6b +- cfi_endproc +- .size __pthread_cond_broadcast, .-__pthread_cond_broadcast +-versioned_symbol (libpthread, __pthread_cond_broadcast, pthread_cond_broadcast, +- GLIBC_2_3_2) +diff --git a/sysdeps/unix/sysv/linux/i386/pthread_cond_signal.S b/sysdeps/unix/sysv/linux/i386/pthread_cond_signal.S +deleted file mode 100644 +index 0038775..0000000 +--- a/sysdeps/unix/sysv/linux/i386/pthread_cond_signal.S ++++ /dev/null +@@ -1,216 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <kernel-features.h> +-#include <pthread-pi-defines.h> +-#include <pthread-errnos.h> +-#include <stap-probe.h> +- +- .text +- +- /* int pthread_cond_signal (pthread_cond_t *cond) */ +- .globl __pthread_cond_signal +- .type __pthread_cond_signal, @function +- .align 16 +-__pthread_cond_signal: +- +- cfi_startproc +- pushl %ebx +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebx, 0) +- pushl %edi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%edi, 0) +- cfi_remember_state +- +- movl 12(%esp), %edi +- +- LIBC_PROBE (cond_signal, 1, %edi) +- +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%edi) +-#else +- cmpxchgl %edx, cond_lock(%edi) +-#endif +- jnz 1f +- +-2: leal cond_futex(%edi), %ebx +- movl total_seq+4(%edi), %eax +- movl total_seq(%edi), %ecx +- cmpl wakeup_seq+4(%edi), %eax +-#if cond_lock != 0 +- /* Must use leal to preserve the flags. */ +- leal cond_lock(%edi), %edi +-#endif +- ja 3f +- jb 4f +- cmpl wakeup_seq-cond_futex(%ebx), %ecx +- jbe 4f +- +- /* Bump the wakeup number. */ +-3: addl $1, wakeup_seq-cond_futex(%ebx) +- adcl $0, wakeup_seq-cond_futex+4(%ebx) +- addl $1, (%ebx) +- +- /* Wake up one thread. */ +- pushl %esi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%esi, 0) +- pushl %ebp +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebp, 0) +- +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- sete %cl +- je 8f +- +- movl dep_mutex-cond_futex(%ebx), %edx +- /* Requeue to a non-robust PI mutex if the PI bit is set and +- the robust bit is not set. */ +- movl MUTEX_KIND(%edx), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- je 9f +- +-8: subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE_OP, %ecx +- movl $SYS_futex, %eax +- movl $1, %edx +- movl $1, %esi +- movl $FUTEX_OP_CLEAR_WAKE_IF_GT_ONE, %ebp +- /* FIXME: Until Ingo fixes 4G/4G vDSO, 6 arg syscalls are broken for +- sysenter. +- ENTER_KERNEL */ +- int $0x80 +- popl %ebp +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebp) +- popl %esi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%esi) +- +- /* For any kind of error, we try again with WAKE. +- The general test also covers running on old kernels. */ +- cmpl $-4095, %eax +- jae 7f +- +-6: xorl %eax, %eax +- popl %edi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%edi) +- popl %ebx +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebx) +- ret +- +- cfi_restore_state +- +-9: movl $(FUTEX_CMP_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %ecx +- movl $SYS_futex, %eax +- movl $1, %edx +- xorl %esi, %esi +- movl dep_mutex-cond_futex(%ebx), %edi +- movl (%ebx), %ebp +- /* FIXME: Until Ingo fixes 4G/4G vDSO, 6 arg syscalls are broken for +- sysenter. +- ENTER_KERNEL */ +- int $0x80 +- popl %ebp +- popl %esi +- +- leal -cond_futex(%ebx), %edi +- +- /* For any kind of error, we try again with WAKE. +- The general test also covers running on old kernels. */ +- cmpl $-4095, %eax +- jb 4f +- +-7: +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- orl $FUTEX_WAKE, %ecx +- +- movl $SYS_futex, %eax +- /* %edx should be 1 already from $FUTEX_WAKE_OP syscall. +- movl $1, %edx */ +- ENTER_KERNEL +- +- /* Unlock. Note that at this point %edi always points to +- cond_lock. */ +-4: LOCK +- subl $1, (%edi) +- je 6b +- +- /* Unlock in loop requires wakeup. */ +-5: movl %edi, %eax +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 6b +- +- /* Initial locking failed. */ +-1: +-#if cond_lock == 0 +- movl %edi, %edx +-#else +- leal cond_lock(%edi), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%edi) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- jmp 2b +- +- cfi_endproc +- .size __pthread_cond_signal, .-__pthread_cond_signal +-versioned_symbol (libpthread, __pthread_cond_signal, pthread_cond_signal, +- GLIBC_2_3_2) +diff --git a/sysdeps/unix/sysv/linux/i386/pthread_cond_timedwait.S b/sysdeps/unix/sysv/linux/i386/pthread_cond_timedwait.S +deleted file mode 100644 +index 6256376..0000000 +--- a/sysdeps/unix/sysv/linux/i386/pthread_cond_timedwait.S ++++ /dev/null +@@ -1,974 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <pthread-errnos.h> +-#include <pthread-pi-defines.h> +-#include <kernel-features.h> +-#include <stap-probe.h> +- +- .text +- +-/* int pthread_cond_timedwait (pthread_cond_t *cond, pthread_mutex_t *mutex, +- const struct timespec *abstime) */ +- .globl __pthread_cond_timedwait +- .type __pthread_cond_timedwait, @function +- .align 16 +-__pthread_cond_timedwait: +-.LSTARTCODE: +- cfi_startproc +-#ifdef SHARED +- cfi_personality(DW_EH_PE_pcrel | DW_EH_PE_sdata4 | DW_EH_PE_indirect, +- DW.ref.__gcc_personality_v0) +- cfi_lsda(DW_EH_PE_pcrel | DW_EH_PE_sdata4, .LexceptSTART) +-#else +- cfi_personality(DW_EH_PE_udata4, __gcc_personality_v0) +- cfi_lsda(DW_EH_PE_udata4, .LexceptSTART) +-#endif +- +- pushl %ebp +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebp, 0) +- pushl %edi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%edi, 0) +- pushl %esi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%esi, 0) +- pushl %ebx +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebx, 0) +- +- movl 20(%esp), %ebx +- movl 28(%esp), %ebp +- +- LIBC_PROBE (cond_timedwait, 3, %ebx, 24(%esp), %ebp) +- +- cmpl $1000000000, 4(%ebp) +- movl $EINVAL, %eax +- jae 18f +- +- /* Stack frame: +- +- esp + 32 +- +--------------------------+ +- esp + 24 | timeout value | +- +--------------------------+ +- esp + 20 | futex pointer | +- +--------------------------+ +- esp + 16 | pi-requeued flag | +- +--------------------------+ +- esp + 12 | old broadcast_seq value | +- +--------------------------+ +- esp + 4 | old wake_seq value | +- +--------------------------+ +- esp + 0 | old cancellation mode | +- +--------------------------+ +- */ +- +-#ifndef __ASSUME_FUTEX_CLOCK_REALTIME +-# ifdef PIC +- LOAD_PIC_REG (cx) +- cmpl $0, __have_futex_clock_realtime@GOTOFF(%ecx) +-# else +- cmpl $0, __have_futex_clock_realtime +-# endif +- je .Lreltmo +-#endif +- +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jnz 1f +- +- /* Store the reference to the mutex. If there is already a +- different value in there this is a bad user bug. */ +-2: cmpl $-1, dep_mutex(%ebx) +- movl 24(%esp), %eax +- je 17f +- movl %eax, dep_mutex(%ebx) +- +- /* Unlock the mutex. */ +-17: xorl %edx, %edx +- call __pthread_mutex_unlock_usercnt +- +- testl %eax, %eax +- jne 16f +- +- addl $1, total_seq(%ebx) +- adcl $0, total_seq+4(%ebx) +- addl $1, cond_futex(%ebx) +- addl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +-#ifdef __ASSUME_FUTEX_CLOCK_REALTIME +-# define FRAME_SIZE 24 +-#else +-# define FRAME_SIZE 32 +-#endif +- subl $FRAME_SIZE, %esp +- cfi_adjust_cfa_offset(FRAME_SIZE) +- cfi_remember_state +- +- /* Get and store current wakeup_seq value. */ +- movl wakeup_seq(%ebx), %edi +- movl wakeup_seq+4(%ebx), %edx +- movl broadcast_seq(%ebx), %eax +- movl %edi, 4(%esp) +- movl %edx, 8(%esp) +- movl %eax, 12(%esp) +- +- /* Reset the pi-requeued flag. */ +- movl $0, 16(%esp) +- +- cmpl $0, (%ebp) +- movl $-ETIMEDOUT, %esi +- js 6f +- +-8: movl cond_futex(%ebx), %edi +- movl %edi, 20(%esp) +- +- /* Unlock. */ +- LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- jne 3f +- +-.LcleanupSTART: +-4: call __pthread_enable_asynccancel +- movl %eax, (%esp) +- +- leal (%ebp), %esi +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- sete %cl +- je 40f +- +- movl dep_mutex(%ebx), %edi +- /* Requeue to a non-robust PI mutex if the PI bit is set and +- the robust bit is not set. */ +- movl MUTEX_KIND(%edi), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- jne 40f +- +- movl $(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %ecx +- /* The following only works like this because we only support +- two clocks, represented using a single bit. */ +- testl $1, cond_nwaiters(%ebx) +- /* XXX Need to implement using sete instead of a jump. */ +- jne 42f +- orl $FUTEX_CLOCK_REALTIME, %ecx +- +-42: movl 20(%esp), %edx +- addl $cond_futex, %ebx +-.Ladd_cond_futex_pi: +- movl $SYS_futex, %eax +- ENTER_KERNEL +- subl $cond_futex, %ebx +-.Lsub_cond_futex_pi: +- movl %eax, %esi +- /* Set the pi-requeued flag only if the kernel has returned 0. The +- kernel does not hold the mutex on ETIMEDOUT or any other error. */ +- cmpl $0, %eax +- sete 16(%esp) +- je 41f +- +- /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns +- successfully, it has already locked the mutex for us and the +- pi_flag (16(%esp)) is set to denote that fact. However, if another +- thread changed the futex value before we entered the wait, the +- syscall may return an EAGAIN and the mutex is not locked. We go +- ahead with a success anyway since later we look at the pi_flag to +- decide if we got the mutex or not. The sequence numbers then make +- sure that only one of the threads actually wake up. We retry using +- normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal +- and PI futexes don't mix. +- +- Note that we don't check for EAGAIN specifically; we assume that the +- only other error the futex function could return is EAGAIN (barring +- the ETIMEOUT of course, for the timeout case in futex) since +- anything else would mean an error in our function. It is too +- expensive to do that check for every call (which is quite common in +- case of a large number of threads), so it has been skipped. */ +- cmpl $-ENOSYS, %eax +- jne 41f +- xorl %ecx, %ecx +- +-40: subl $1, %ecx +- movl $0, 16(%esp) +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAIT_BITSET, %ecx +- /* The following only works like this because we only support +- two clocks, represented using a single bit. */ +- testl $1, cond_nwaiters(%ebx) +- jne 30f +- orl $FUTEX_CLOCK_REALTIME, %ecx +-30: +- movl 20(%esp), %edx +- movl $0xffffffff, %ebp +- addl $cond_futex, %ebx +-.Ladd_cond_futex: +- movl $SYS_futex, %eax +- ENTER_KERNEL +- subl $cond_futex, %ebx +-.Lsub_cond_futex: +- movl 28+FRAME_SIZE(%esp), %ebp +- movl %eax, %esi +- +-41: movl (%esp), %eax +- call __pthread_disable_asynccancel +-.LcleanupEND: +- +- /* Lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jnz 5f +- +-6: movl broadcast_seq(%ebx), %eax +- cmpl 12(%esp), %eax +- jne 23f +- +- movl woken_seq(%ebx), %eax +- movl woken_seq+4(%ebx), %ecx +- +- movl wakeup_seq(%ebx), %edi +- movl wakeup_seq+4(%ebx), %edx +- +- cmpl 8(%esp), %edx +- jne 7f +- cmpl 4(%esp), %edi +- je 15f +- +-7: cmpl %ecx, %edx +- jne 9f +- cmp %eax, %edi +- jne 9f +- +-15: cmpl $-ETIMEDOUT, %esi +- je 28f +- +- /* We need to go back to futex_wait. If we're using requeue_pi, then +- release the mutex we had acquired and go back. */ +- movl 16(%esp), %edx +- test %edx, %edx +- jz 8b +- +- /* Adjust the mutex values first and then unlock it. The unlock +- should always succeed or else the kernel did not lock the mutex +- correctly. */ +- movl dep_mutex(%ebx), %eax +- call __pthread_mutex_cond_lock_adjust +- movl dep_mutex(%ebx), %eax +- xorl %edx, %edx +- call __pthread_mutex_unlock_usercnt +- jmp 8b +- +-28: addl $1, wakeup_seq(%ebx) +- adcl $0, wakeup_seq+4(%ebx) +- addl $1, cond_futex(%ebx) +- movl $ETIMEDOUT, %esi +- jmp 14f +- +-23: xorl %esi, %esi +- jmp 24f +- +-9: xorl %esi, %esi +-14: addl $1, woken_seq(%ebx) +- adcl $0, woken_seq+4(%ebx) +- +-24: subl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- movl total_seq(%ebx), %eax +- andl total_seq+4(%ebx), %eax +- cmpl $0xffffffff, %eax +- jne 25f +- movl cond_nwaiters(%ebx), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 25f +- +- addl $cond_nwaiters, %ebx +- movl $SYS_futex, %eax +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_nwaiters(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $1, %edx +- ENTER_KERNEL +- subl $cond_nwaiters, %ebx +- +-25: LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- jne 10f +- +-11: movl 24+FRAME_SIZE(%esp), %eax +- /* With requeue_pi, the mutex lock is held in the kernel. */ +- movl 16(%esp), %ecx +- testl %ecx, %ecx +- jnz 27f +- +- call __pthread_mutex_cond_lock +-26: addl $FRAME_SIZE, %esp +- cfi_adjust_cfa_offset(-FRAME_SIZE) +- +- /* We return the result of the mutex_lock operation if it failed. */ +- testl %eax, %eax +-#ifdef HAVE_CMOV +- cmovel %esi, %eax +-#else +- jne 22f +- movl %esi, %eax +-22: +-#endif +- +-18: popl %ebx +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebx) +- popl %esi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%esi) +- popl %edi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%edi) +- popl %ebp +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebp) +- +- ret +- +- cfi_restore_state +- +-27: call __pthread_mutex_cond_lock_adjust +- xorl %eax, %eax +- jmp 26b +- +- cfi_adjust_cfa_offset(-FRAME_SIZE); +- /* Initial locking failed. */ +-1: +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- jmp 2b +- +- /* The initial unlocking of the mutex failed. */ +-16: +- LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- jne 18b +- +- movl %eax, %esi +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- +- movl %esi, %eax +- jmp 18b +- +- cfi_adjust_cfa_offset(FRAME_SIZE) +- +- /* Unlock in loop requires wakeup. */ +-3: +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 4b +- +- /* Locking in loop failed. */ +-5: +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- jmp 6b +- +- /* Unlock after loop requires wakeup. */ +-10: +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 11b +- +-#ifndef __ASSUME_FUTEX_CLOCK_REALTIME +- cfi_adjust_cfa_offset(-FRAME_SIZE) +-.Lreltmo: +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-# if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-# else +- cmpxchgl %edx, cond_lock(%ebx) +-# endif +- jnz 101f +- +- /* Store the reference to the mutex. If there is already a +- different value in there this is a bad user bug. */ +-102: cmpl $-1, dep_mutex(%ebx) +- movl 24(%esp), %eax +- je 117f +- movl %eax, dep_mutex(%ebx) +- +- /* Unlock the mutex. */ +-117: xorl %edx, %edx +- call __pthread_mutex_unlock_usercnt +- +- testl %eax, %eax +- jne 16b +- +- addl $1, total_seq(%ebx) +- adcl $0, total_seq+4(%ebx) +- addl $1, cond_futex(%ebx) +- addl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +- subl $FRAME_SIZE, %esp +- cfi_adjust_cfa_offset(FRAME_SIZE) +- +- /* Get and store current wakeup_seq value. */ +- movl wakeup_seq(%ebx), %edi +- movl wakeup_seq+4(%ebx), %edx +- movl broadcast_seq(%ebx), %eax +- movl %edi, 4(%esp) +- movl %edx, 8(%esp) +- movl %eax, 12(%esp) +- +- /* Reset the pi-requeued flag. */ +- movl $0, 16(%esp) +- +- /* Get the current time. */ +-108: movl %ebx, %edx +-# ifdef __NR_clock_gettime +- /* Get the clock number. */ +- movl cond_nwaiters(%ebx), %ebx +- andl $((1 << nwaiters_shift) - 1), %ebx +- /* Only clocks 0 and 1 are allowed so far. Both are handled in the +- kernel. */ +- leal 24(%esp), %ecx +- movl $__NR_clock_gettime, %eax +- ENTER_KERNEL +- movl %edx, %ebx +- +- /* Compute relative timeout. */ +- movl (%ebp), %ecx +- movl 4(%ebp), %edx +- subl 24(%esp), %ecx +- subl 28(%esp), %edx +-# else +- /* Get the current time. */ +- leal 24(%esp), %ebx +- xorl %ecx, %ecx +- movl $__NR_gettimeofday, %eax +- ENTER_KERNEL +- movl %edx, %ebx +- +- /* Compute relative timeout. */ +- movl 28(%esp), %eax +- movl $1000, %edx +- mul %edx /* Milli seconds to nano seconds. */ +- movl (%ebp), %ecx +- movl 4(%ebp), %edx +- subl 24(%esp), %ecx +- subl %eax, %edx +-# endif +- jns 112f +- addl $1000000000, %edx +- subl $1, %ecx +-112: testl %ecx, %ecx +- movl $-ETIMEDOUT, %esi +- js 106f +- +- /* Store relative timeout. */ +-121: movl %ecx, 24(%esp) +- movl %edx, 28(%esp) +- +- movl cond_futex(%ebx), %edi +- movl %edi, 20(%esp) +- +- /* Unlock. */ +- LOCK +-# if cond_lock == 0 +- subl $1, (%ebx) +-# else +- subl $1, cond_lock(%ebx) +-# endif +- jne 103f +- +-.LcleanupSTART2: +-104: call __pthread_enable_asynccancel +- movl %eax, (%esp) +- +- leal 24(%esp), %esi +-# if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-# endif +- cmpl $-1, dep_mutex(%ebx) +- sete %cl +- subl $1, %ecx +-# ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-# else +- andl %gs:PRIVATE_FUTEX, %ecx +-# endif +-# if FUTEX_WAIT != 0 +- addl $FUTEX_WAIT, %ecx +-# endif +- movl 20(%esp), %edx +- addl $cond_futex, %ebx +-.Ladd_cond_futex2: +- movl $SYS_futex, %eax +- ENTER_KERNEL +- subl $cond_futex, %ebx +-.Lsub_cond_futex2: +- movl %eax, %esi +- +-141: movl (%esp), %eax +- call __pthread_disable_asynccancel +-.LcleanupEND2: +- +- +- /* Lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-# if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-# else +- cmpxchgl %edx, cond_lock(%ebx) +-# endif +- jnz 105f +- +-106: movl broadcast_seq(%ebx), %eax +- cmpl 12(%esp), %eax +- jne 23b +- +- movl woken_seq(%ebx), %eax +- movl woken_seq+4(%ebx), %ecx +- +- movl wakeup_seq(%ebx), %edi +- movl wakeup_seq+4(%ebx), %edx +- +- cmpl 8(%esp), %edx +- jne 107f +- cmpl 4(%esp), %edi +- je 115f +- +-107: cmpl %ecx, %edx +- jne 9b +- cmp %eax, %edi +- jne 9b +- +-115: cmpl $-ETIMEDOUT, %esi +- je 28b +- +- jmp 8b +- +- cfi_adjust_cfa_offset(-FRAME_SIZE) +- /* Initial locking failed. */ +-101: +-# if cond_lock == 0 +- movl %ebx, %edx +-# else +- leal cond_lock(%ebx), %edx +-# endif +-# if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-# endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-# if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-# endif +- call __lll_lock_wait +- jmp 102b +- +- cfi_adjust_cfa_offset(FRAME_SIZE) +- +- /* Unlock in loop requires wakeup. */ +-103: +-# if cond_lock == 0 +- movl %ebx, %eax +-# else +- leal cond_lock(%ebx), %eax +-# endif +-# if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-# endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-# if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-# endif +- call __lll_unlock_wake +- jmp 104b +- +- /* Locking in loop failed. */ +-105: +-# if cond_lock == 0 +- movl %ebx, %edx +-# else +- leal cond_lock(%ebx), %edx +-# endif +-# if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-# endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-# if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-# endif +- call __lll_lock_wait +- jmp 106b +-#endif +- +- .size __pthread_cond_timedwait, .-__pthread_cond_timedwait +-versioned_symbol (libpthread, __pthread_cond_timedwait, pthread_cond_timedwait, +- GLIBC_2_3_2) +- +- +- .type __condvar_tw_cleanup2, @function +-__condvar_tw_cleanup2: +- subl $cond_futex, %ebx +- .size __condvar_tw_cleanup2, .-__condvar_tw_cleanup2 +- .type __condvar_tw_cleanup, @function +-__condvar_tw_cleanup: +- movl %eax, %esi +- +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jz 1f +- +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- +-1: movl broadcast_seq(%ebx), %eax +- cmpl 12(%esp), %eax +- jne 3f +- +- /* We increment the wakeup_seq counter only if it is lower than +- total_seq. If this is not the case the thread was woken and +- then canceled. In this case we ignore the signal. */ +- movl total_seq(%ebx), %eax +- movl total_seq+4(%ebx), %edi +- cmpl wakeup_seq+4(%ebx), %edi +- jb 6f +- ja 7f +- cmpl wakeup_seq(%ebx), %eax +- jbe 7f +- +-6: addl $1, wakeup_seq(%ebx) +- adcl $0, wakeup_seq+4(%ebx) +- addl $1, cond_futex(%ebx) +- +-7: addl $1, woken_seq(%ebx) +- adcl $0, woken_seq+4(%ebx) +- +-3: subl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- xorl %edi, %edi +- movl total_seq(%ebx), %eax +- andl total_seq+4(%ebx), %eax +- cmpl $0xffffffff, %eax +- jne 4f +- movl cond_nwaiters(%ebx), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 4f +- +- addl $cond_nwaiters, %ebx +- movl $SYS_futex, %eax +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_nwaiters(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $1, %edx +- ENTER_KERNEL +- subl $cond_nwaiters, %ebx +- movl $1, %edi +- +-4: LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- je 2f +- +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- +- /* Wake up all waiters to make sure no signal gets lost. */ +-2: testl %edi, %edi +- jnz 5f +- addl $cond_futex, %ebx +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $SYS_futex, %eax +- movl $0x7fffffff, %edx +- ENTER_KERNEL +- +- /* Lock the mutex only if we don't own it already. This only happens +- in case of PI mutexes, if we got cancelled after a successful +- return of the futex syscall and before disabling async +- cancellation. */ +-5: movl 24+FRAME_SIZE(%esp), %eax +- movl MUTEX_KIND(%eax), %ebx +- andl $(ROBUST_BIT|PI_BIT), %ebx +- cmpl $PI_BIT, %ebx +- jne 8f +- +- movl (%eax), %ebx +- andl $TID_MASK, %ebx +- cmpl %ebx, %gs:TID +- jne 8f +- /* We managed to get the lock. Fix it up before returning. */ +- call __pthread_mutex_cond_lock_adjust +- jmp 9f +- +-8: call __pthread_mutex_cond_lock +- +-9: movl %esi, (%esp) +-.LcallUR: +- call _Unwind_Resume +- hlt +-.LENDCODE: +- cfi_endproc +- .size __condvar_tw_cleanup, .-__condvar_tw_cleanup +- +- +- .section .gcc_except_table,"a",@progbits +-.LexceptSTART: +- .byte DW_EH_PE_omit # @LPStart format (omit) +- .byte DW_EH_PE_omit # @TType format (omit) +- .byte DW_EH_PE_sdata4 # call-site format +- # DW_EH_PE_sdata4 +- .uleb128 .Lcstend-.Lcstbegin +-.Lcstbegin: +- .long .LcleanupSTART-.LSTARTCODE +- .long .Ladd_cond_futex_pi-.LcleanupSTART +- .long __condvar_tw_cleanup-.LSTARTCODE +- .uleb128 0 +- .long .Ladd_cond_futex_pi-.LSTARTCODE +- .long .Lsub_cond_futex_pi-.Ladd_cond_futex_pi +- .long __condvar_tw_cleanup2-.LSTARTCODE +- .uleb128 0 +- .long .Lsub_cond_futex_pi-.LSTARTCODE +- .long .Ladd_cond_futex-.Lsub_cond_futex_pi +- .long __condvar_tw_cleanup-.LSTARTCODE +- .uleb128 0 +- .long .Ladd_cond_futex-.LSTARTCODE +- .long .Lsub_cond_futex-.Ladd_cond_futex +- .long __condvar_tw_cleanup2-.LSTARTCODE +- .uleb128 0 +- .long .Lsub_cond_futex-.LSTARTCODE +- .long .LcleanupEND-.Lsub_cond_futex +- .long __condvar_tw_cleanup-.LSTARTCODE +- .uleb128 0 +-#ifndef __ASSUME_FUTEX_CLOCK_REALTIME +- .long .LcleanupSTART2-.LSTARTCODE +- .long .Ladd_cond_futex2-.LcleanupSTART2 +- .long __condvar_tw_cleanup-.LSTARTCODE +- .uleb128 0 +- .long .Ladd_cond_futex2-.LSTARTCODE +- .long .Lsub_cond_futex2-.Ladd_cond_futex2 +- .long __condvar_tw_cleanup2-.LSTARTCODE +- .uleb128 0 +- .long .Lsub_cond_futex2-.LSTARTCODE +- .long .LcleanupEND2-.Lsub_cond_futex2 +- .long __condvar_tw_cleanup-.LSTARTCODE +- .uleb128 0 +-#endif +- .long .LcallUR-.LSTARTCODE +- .long .LENDCODE-.LcallUR +- .long 0 +- .uleb128 0 +-.Lcstend: +- +- +-#ifdef SHARED +- .hidden DW.ref.__gcc_personality_v0 +- .weak DW.ref.__gcc_personality_v0 +- .section .gnu.linkonce.d.DW.ref.__gcc_personality_v0,"aw",@progbits +- .align 4 +- .type DW.ref.__gcc_personality_v0, @object +- .size DW.ref.__gcc_personality_v0, 4 +-DW.ref.__gcc_personality_v0: +- .long __gcc_personality_v0 +-#endif +diff --git a/sysdeps/unix/sysv/linux/i386/pthread_cond_wait.S b/sysdeps/unix/sysv/linux/i386/pthread_cond_wait.S +deleted file mode 100644 +index 5016718..0000000 +--- a/sysdeps/unix/sysv/linux/i386/pthread_cond_wait.S ++++ /dev/null +@@ -1,642 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <tcb-offsets.h> +-#include <pthread-errnos.h> +-#include <pthread-pi-defines.h> +-#include <kernel-features.h> +-#include <stap-probe.h> +- +- +- .text +- +-/* int pthread_cond_wait (pthread_cond_t *cond, pthread_mutex_t *mutex) */ +- .globl __pthread_cond_wait +- .type __pthread_cond_wait, @function +- .align 16 +-__pthread_cond_wait: +-.LSTARTCODE: +- cfi_startproc +-#ifdef SHARED +- cfi_personality(DW_EH_PE_pcrel | DW_EH_PE_sdata4 | DW_EH_PE_indirect, +- DW.ref.__gcc_personality_v0) +- cfi_lsda(DW_EH_PE_pcrel | DW_EH_PE_sdata4, .LexceptSTART) +-#else +- cfi_personality(DW_EH_PE_udata4, __gcc_personality_v0) +- cfi_lsda(DW_EH_PE_udata4, .LexceptSTART) +-#endif +- +- pushl %ebp +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebp, 0) +- pushl %edi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%edi, 0) +- pushl %esi +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%esi, 0) +- pushl %ebx +- cfi_adjust_cfa_offset(4) +- cfi_rel_offset(%ebx, 0) +- +- xorl %esi, %esi +- movl 20(%esp), %ebx +- +- LIBC_PROBE (cond_wait, 2, 24(%esp), %ebx) +- +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jnz 1f +- +- /* Store the reference to the mutex. If there is already a +- different value in there this is a bad user bug. */ +-2: cmpl $-1, dep_mutex(%ebx) +- movl 24(%esp), %eax +- je 15f +- movl %eax, dep_mutex(%ebx) +- +- /* Unlock the mutex. */ +-15: xorl %edx, %edx +- call __pthread_mutex_unlock_usercnt +- +- testl %eax, %eax +- jne 12f +- +- addl $1, total_seq(%ebx) +- adcl $0, total_seq+4(%ebx) +- addl $1, cond_futex(%ebx) +- addl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +-#define FRAME_SIZE 20 +- subl $FRAME_SIZE, %esp +- cfi_adjust_cfa_offset(FRAME_SIZE) +- cfi_remember_state +- +- /* Get and store current wakeup_seq value. */ +- movl wakeup_seq(%ebx), %edi +- movl wakeup_seq+4(%ebx), %edx +- movl broadcast_seq(%ebx), %eax +- movl %edi, 4(%esp) +- movl %edx, 8(%esp) +- movl %eax, 12(%esp) +- +- /* Reset the pi-requeued flag. */ +-8: movl $0, 16(%esp) +- movl cond_futex(%ebx), %ebp +- +- /* Unlock. */ +- LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- jne 3f +- +-.LcleanupSTART: +-4: call __pthread_enable_asynccancel +- movl %eax, (%esp) +- +- xorl %ecx, %ecx +- cmpl $-1, dep_mutex(%ebx) +- sete %cl +- je 18f +- +- movl dep_mutex(%ebx), %edi +- /* Requeue to a non-robust PI mutex if the PI bit is set and +- the robust bit is not set. */ +- movl MUTEX_KIND(%edi), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- jne 18f +- +- movl $(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %ecx +- movl %ebp, %edx +- xorl %esi, %esi +- addl $cond_futex, %ebx +-.Ladd_cond_futex_pi: +- movl $SYS_futex, %eax +- ENTER_KERNEL +- subl $cond_futex, %ebx +-.Lsub_cond_futex_pi: +- /* Set the pi-requeued flag only if the kernel has returned 0. The +- kernel does not hold the mutex on error. */ +- cmpl $0, %eax +- sete 16(%esp) +- je 19f +- +- /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns +- successfully, it has already locked the mutex for us and the +- pi_flag (16(%esp)) is set to denote that fact. However, if another +- thread changed the futex value before we entered the wait, the +- syscall may return an EAGAIN and the mutex is not locked. We go +- ahead with a success anyway since later we look at the pi_flag to +- decide if we got the mutex or not. The sequence numbers then make +- sure that only one of the threads actually wake up. We retry using +- normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal +- and PI futexes don't mix. +- +- Note that we don't check for EAGAIN specifically; we assume that the +- only other error the futex function could return is EAGAIN since +- anything else would mean an error in our function. It is too +- expensive to do that check for every call (which is quite common in +- case of a large number of threads), so it has been skipped. */ +- cmpl $-ENOSYS, %eax +- jne 19f +- xorl %ecx, %ecx +- +-18: subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +-#if FUTEX_WAIT != 0 +- addl $FUTEX_WAIT, %ecx +-#endif +- movl %ebp, %edx +- addl $cond_futex, %ebx +-.Ladd_cond_futex: +- movl $SYS_futex, %eax +- ENTER_KERNEL +- subl $cond_futex, %ebx +-.Lsub_cond_futex: +- +-19: movl (%esp), %eax +- call __pthread_disable_asynccancel +-.LcleanupEND: +- +- /* Lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jnz 5f +- +-6: movl broadcast_seq(%ebx), %eax +- cmpl 12(%esp), %eax +- jne 16f +- +- movl woken_seq(%ebx), %eax +- movl woken_seq+4(%ebx), %ecx +- +- movl wakeup_seq(%ebx), %edi +- movl wakeup_seq+4(%ebx), %edx +- +- cmpl 8(%esp), %edx +- jne 7f +- cmpl 4(%esp), %edi +- je 22f +- +-7: cmpl %ecx, %edx +- jne 9f +- cmp %eax, %edi +- je 22f +- +-9: addl $1, woken_seq(%ebx) +- adcl $0, woken_seq+4(%ebx) +- +- /* Unlock */ +-16: subl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- movl total_seq(%ebx), %eax +- andl total_seq+4(%ebx), %eax +- cmpl $0xffffffff, %eax +- jne 17f +- movl cond_nwaiters(%ebx), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 17f +- +- addl $cond_nwaiters, %ebx +- movl $SYS_futex, %eax +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_nwaiters(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $1, %edx +- ENTER_KERNEL +- subl $cond_nwaiters, %ebx +- +-17: LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- jne 10f +- +- /* With requeue_pi, the mutex lock is held in the kernel. */ +-11: movl 24+FRAME_SIZE(%esp), %eax +- movl 16(%esp), %ecx +- testl %ecx, %ecx +- jnz 21f +- +- call __pthread_mutex_cond_lock +-20: addl $FRAME_SIZE, %esp +- cfi_adjust_cfa_offset(-FRAME_SIZE); +- +-14: popl %ebx +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebx) +- popl %esi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%esi) +- popl %edi +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%edi) +- popl %ebp +- cfi_adjust_cfa_offset(-4) +- cfi_restore(%ebp) +- +- /* We return the result of the mutex_lock operation. */ +- ret +- +- cfi_restore_state +- +-21: call __pthread_mutex_cond_lock_adjust +- xorl %eax, %eax +- jmp 20b +- +- cfi_adjust_cfa_offset(-FRAME_SIZE); +- +- /* We need to go back to futex_wait. If we're using requeue_pi, then +- release the mutex we had acquired and go back. */ +-22: movl 16(%esp), %edx +- test %edx, %edx +- jz 8b +- +- /* Adjust the mutex values first and then unlock it. The unlock +- should always succeed or else the kernel did not lock the mutex +- correctly. */ +- movl dep_mutex(%ebx), %eax +- call __pthread_mutex_cond_lock_adjust +- movl dep_mutex(%ebx), %eax +- xorl %edx, %edx +- call __pthread_mutex_unlock_usercnt +- jmp 8b +- +- /* Initial locking failed. */ +-1: +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- jmp 2b +- +- /* The initial unlocking of the mutex failed. */ +-12: +- LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- jne 14b +- +- movl %eax, %esi +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- +- movl %esi, %eax +- jmp 14b +- +- cfi_adjust_cfa_offset(FRAME_SIZE) +- +- /* Unlock in loop requires wakeup. */ +-3: +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 4b +- +- /* Locking in loop failed. */ +-5: +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- jmp 6b +- +- /* Unlock after loop requires wakeup. */ +-10: +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- jmp 11b +- +- .size __pthread_cond_wait, .-__pthread_cond_wait +-versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait, +- GLIBC_2_3_2) +- +- +- .type __condvar_w_cleanup2, @function +-__condvar_w_cleanup2: +- subl $cond_futex, %ebx +- .size __condvar_w_cleanup2, .-__condvar_w_cleanup2 +-.LSbl4: +- .type __condvar_w_cleanup, @function +-__condvar_w_cleanup: +- movl %eax, %esi +- +- /* Get internal lock. */ +- movl $1, %edx +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %edx, (%ebx) +-#else +- cmpxchgl %edx, cond_lock(%ebx) +-#endif +- jz 1f +- +-#if cond_lock == 0 +- movl %ebx, %edx +-#else +- leal cond_lock(%ebx), %edx +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_lock_wait +- +-1: movl broadcast_seq(%ebx), %eax +- cmpl 12(%esp), %eax +- jne 3f +- +- /* We increment the wakeup_seq counter only if it is lower than +- total_seq. If this is not the case the thread was woken and +- then canceled. In this case we ignore the signal. */ +- movl total_seq(%ebx), %eax +- movl total_seq+4(%ebx), %edi +- cmpl wakeup_seq+4(%ebx), %edi +- jb 6f +- ja 7f +- cmpl wakeup_seq(%ebx), %eax +- jbe 7f +- +-6: addl $1, wakeup_seq(%ebx) +- adcl $0, wakeup_seq+4(%ebx) +- addl $1, cond_futex(%ebx) +- +-7: addl $1, woken_seq(%ebx) +- adcl $0, woken_seq+4(%ebx) +- +-3: subl $(1 << nwaiters_shift), cond_nwaiters(%ebx) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- xorl %edi, %edi +- movl total_seq(%ebx), %eax +- andl total_seq+4(%ebx), %eax +- cmpl $0xffffffff, %eax +- jne 4f +- movl cond_nwaiters(%ebx), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 4f +- +- addl $cond_nwaiters, %ebx +- movl $SYS_futex, %eax +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_nwaiters(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $1, %edx +- ENTER_KERNEL +- subl $cond_nwaiters, %ebx +- movl $1, %edi +- +-4: LOCK +-#if cond_lock == 0 +- subl $1, (%ebx) +-#else +- subl $1, cond_lock(%ebx) +-#endif +- je 2f +- +-#if cond_lock == 0 +- movl %ebx, %eax +-#else +- leal cond_lock(%ebx), %eax +-#endif +-#if (LLL_SHARED-LLL_PRIVATE) > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex(%ebx) +- setne %cl +- subl $1, %ecx +- andl $(LLL_SHARED-LLL_PRIVATE), %ecx +-#if LLL_PRIVATE != 0 +- addl $LLL_PRIVATE, %ecx +-#endif +- call __lll_unlock_wake +- +- /* Wake up all waiters to make sure no signal gets lost. */ +-2: testl %edi, %edi +- jnz 5f +- addl $cond_futex, %ebx +-#if FUTEX_PRIVATE_FLAG > 255 +- xorl %ecx, %ecx +-#endif +- cmpl $-1, dep_mutex-cond_futex(%ebx) +- sete %cl +- subl $1, %ecx +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %ecx +-#else +- andl %gs:PRIVATE_FUTEX, %ecx +-#endif +- addl $FUTEX_WAKE, %ecx +- movl $SYS_futex, %eax +- movl $0x7fffffff, %edx +- ENTER_KERNEL +- +- /* Lock the mutex only if we don't own it already. This only happens +- in case of PI mutexes, if we got cancelled after a successful +- return of the futex syscall and before disabling async +- cancellation. */ +-5: movl 24+FRAME_SIZE(%esp), %eax +- movl MUTEX_KIND(%eax), %ebx +- andl $(ROBUST_BIT|PI_BIT), %ebx +- cmpl $PI_BIT, %ebx +- jne 8f +- +- movl (%eax), %ebx +- andl $TID_MASK, %ebx +- cmpl %ebx, %gs:TID +- jne 8f +- /* We managed to get the lock. Fix it up before returning. */ +- call __pthread_mutex_cond_lock_adjust +- jmp 9f +- +-8: call __pthread_mutex_cond_lock +- +-9: movl %esi, (%esp) +-.LcallUR: +- call _Unwind_Resume +- hlt +-.LENDCODE: +- cfi_endproc +- .size __condvar_w_cleanup, .-__condvar_w_cleanup +- +- +- .section .gcc_except_table,"a",@progbits +-.LexceptSTART: +- .byte DW_EH_PE_omit # @LPStart format (omit) +- .byte DW_EH_PE_omit # @TType format (omit) +- .byte DW_EH_PE_sdata4 # call-site format +- # DW_EH_PE_sdata4 +- .uleb128 .Lcstend-.Lcstbegin +-.Lcstbegin: +- .long .LcleanupSTART-.LSTARTCODE +- .long .Ladd_cond_futex_pi-.LcleanupSTART +- .long __condvar_w_cleanup-.LSTARTCODE +- .uleb128 0 +- .long .Ladd_cond_futex_pi-.LSTARTCODE +- .long .Lsub_cond_futex_pi-.Ladd_cond_futex_pi +- .long __condvar_w_cleanup2-.LSTARTCODE +- .uleb128 0 +- .long .Lsub_cond_futex_pi-.LSTARTCODE +- .long .Ladd_cond_futex-.Lsub_cond_futex_pi +- .long __condvar_w_cleanup-.LSTARTCODE +- .uleb128 0 +- .long .Ladd_cond_futex-.LSTARTCODE +- .long .Lsub_cond_futex-.Ladd_cond_futex +- .long __condvar_w_cleanup2-.LSTARTCODE +- .uleb128 0 +- .long .Lsub_cond_futex-.LSTARTCODE +- .long .LcleanupEND-.Lsub_cond_futex +- .long __condvar_w_cleanup-.LSTARTCODE +- .uleb128 0 +- .long .LcallUR-.LSTARTCODE +- .long .LENDCODE-.LcallUR +- .long 0 +- .uleb128 0 +-.Lcstend: +- +-#ifdef SHARED +- .hidden DW.ref.__gcc_personality_v0 +- .weak DW.ref.__gcc_personality_v0 +- .section .gnu.linkonce.d.DW.ref.__gcc_personality_v0,"aw",@progbits +- .align 4 +- .type DW.ref.__gcc_personality_v0, @object +- .size DW.ref.__gcc_personality_v0, 4 +-DW.ref.__gcc_personality_v0: +- .long __gcc_personality_v0 +-#endif +diff --git a/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h b/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h +index 345e79a..371bc3c 100644 +--- a/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h ++++ b/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h +@@ -123,19 +123,32 @@ typedef union + + + /* Data structure for conditional variable handling. The structure of +- the attribute type is deliberately not exposed. */ ++ the attribute type is not exposed on purpose. */ + typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +diff --git a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S b/sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S +deleted file mode 100644 +index de455dd..0000000 +--- a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S ++++ /dev/null +@@ -1,177 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <kernel-features.h> +-#include <pthread-pi-defines.h> +-#include <pthread-errnos.h> +-#include <stap-probe.h> +- +- .text +- +- /* int pthread_cond_broadcast (pthread_cond_t *cond) */ +-ENTRY(__pthread_cond_broadcast) +- +- LIBC_PROBE (cond_broadcast, 1, %rdi) +- +- /* Get internal lock. */ +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jnz 1f +- +-2: addq $cond_futex, %rdi +- movq total_seq-cond_futex(%rdi), %r9 +- cmpq wakeup_seq-cond_futex(%rdi), %r9 +- jna 4f +- +- /* Cause all currently waiting threads to recognize they are +- woken up. */ +- movq %r9, wakeup_seq-cond_futex(%rdi) +- movq %r9, woken_seq-cond_futex(%rdi) +- addq %r9, %r9 +- movl %r9d, (%rdi) +- incl broadcast_seq-cond_futex(%rdi) +- +- /* Get the address of the mutex used. */ +- mov dep_mutex-cond_futex(%rdi), %R8_LP +- +- /* Unlock. */ +- LOCK +- decl cond_lock-cond_futex(%rdi) +- jne 7f +- +-8: cmp $-1, %R8_LP +- je 9f +- +- /* Do not use requeue for pshared condvars. */ +- testl $PS_BIT, MUTEX_KIND(%r8) +- jne 9f +- +- /* Requeue to a PI mutex if the PI bit is set. */ +- movl MUTEX_KIND(%r8), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- je 81f +- +- /* Wake up all threads. */ +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $(FUTEX_CMP_REQUEUE|FUTEX_PRIVATE_FLAG), %esi +-#else +- movl %fs:PRIVATE_FUTEX, %esi +- orl $FUTEX_CMP_REQUEUE, %esi +-#endif +- movl $SYS_futex, %eax +- movl $1, %edx +- movl $0x7fffffff, %r10d +- syscall +- +- /* For any kind of error, which mainly is EAGAIN, we try again +- with WAKE. The general test also covers running on old +- kernels. */ +- cmpq $-4095, %rax +- jae 9f +- +-10: xorl %eax, %eax +- retq +- +- /* Wake up all threads. */ +-81: movl $(FUTEX_CMP_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %esi +- movl $SYS_futex, %eax +- movl $1, %edx +- movl $0x7fffffff, %r10d +- syscall +- +- /* For any kind of error, which mainly is EAGAIN, we try again +- with WAKE. The general test also covers running on old +- kernels. */ +- cmpq $-4095, %rax +- jb 10b +- jmp 9f +- +- .align 16 +- /* Unlock. */ +-4: LOCK +- decl cond_lock-cond_futex(%rdi) +- jne 5f +- +-6: xorl %eax, %eax +- retq +- +- /* Initial locking failed. */ +-1: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- jmp 2b +- +- /* Unlock in loop requires wakeup. */ +-5: addq $cond_lock-cond_futex, %rdi +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- jmp 6b +- +- /* Unlock in loop requires wakeup. */ +-7: addq $cond_lock-cond_futex, %rdi +- cmp $-1, %R8_LP +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- subq $cond_lock-cond_futex, %rdi +- jmp 8b +- +-9: /* The futex requeue functionality is not available. */ +- cmp $-1, %R8_LP +- movl $0x7fffffff, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- jmp 10b +-END(__pthread_cond_broadcast) +- +-versioned_symbol (libpthread, __pthread_cond_broadcast, pthread_cond_broadcast, +- GLIBC_2_3_2) +diff --git a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S b/sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S +deleted file mode 100644 +index da14bc3..0000000 +--- a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S ++++ /dev/null +@@ -1,161 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <pthread-pi-defines.h> +-#include <kernel-features.h> +-#include <pthread-errnos.h> +-#include <stap-probe.h> +- +- +- .text +- +-ENTRY(__pthread_cond_signal) +- +- LIBC_PROBE (cond_signal, 1, %rdi) +- +- /* Get internal lock. */ +- movq %rdi, %r8 +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jnz 1f +- +-2: addq $cond_futex, %rdi +- movq total_seq(%r8), %rcx +- cmpq wakeup_seq(%r8), %rcx +- jbe 4f +- +- /* Bump the wakeup number. */ +- addq $1, wakeup_seq(%r8) +- addl $1, (%rdi) +- +- /* Wake up one thread. */ +- LP_OP(cmp) $-1, dep_mutex(%r8) +- movl $FUTEX_WAKE_OP, %esi +- movl $1, %edx +- movl $SYS_futex, %eax +- je 8f +- +- /* Get the address of the mutex used. */ +- mov dep_mutex(%r8), %RCX_LP +- movl MUTEX_KIND(%rcx), %r11d +- andl $(ROBUST_BIT|PI_BIT), %r11d +- cmpl $PI_BIT, %r11d +- je 9f +- +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $(FUTEX_WAKE_OP|FUTEX_PRIVATE_FLAG), %esi +-#else +- orl %fs:PRIVATE_FUTEX, %esi +-#endif +- +-8: movl $1, %r10d +-#if cond_lock != 0 +- addq $cond_lock, %r8 +-#endif +- movl $FUTEX_OP_CLEAR_WAKE_IF_GT_ONE, %r9d +- syscall +-#if cond_lock != 0 +- subq $cond_lock, %r8 +-#endif +- /* For any kind of error, we try again with WAKE. +- The general test also covers running on old kernels. */ +- cmpq $-4095, %rax +- jae 7f +- +- xorl %eax, %eax +- retq +- +- /* Wake up one thread and requeue none in the PI Mutex case. */ +-9: movl $(FUTEX_CMP_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %esi +- movq %rcx, %r8 +- xorq %r10, %r10 +- movl (%rdi), %r9d // XXX Can this be right? +- syscall +- +- leaq -cond_futex(%rdi), %r8 +- +- /* For any kind of error, we try again with WAKE. +- The general test also covers running on old kernels. */ +- cmpq $-4095, %rax +- jb 4f +- +-7: +-#ifdef __ASSUME_PRIVATE_FUTEX +- andl $FUTEX_PRIVATE_FLAG, %esi +-#else +- andl %fs:PRIVATE_FUTEX, %esi +-#endif +- orl $FUTEX_WAKE, %esi +- movl $SYS_futex, %eax +- /* %rdx should be 1 already from $FUTEX_WAKE_OP syscall. +- movl $1, %edx */ +- syscall +- +- /* Unlock. */ +-4: LOCK +-#if cond_lock == 0 +- decl (%r8) +-#else +- decl cond_lock(%r8) +-#endif +- jne 5f +- +-6: xorl %eax, %eax +- retq +- +- /* Initial locking failed. */ +-1: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- jmp 2b +- +- /* Unlock in loop requires wakeup. */ +-5: +- movq %r8, %rdi +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- jmp 6b +-END(__pthread_cond_signal) +- +-versioned_symbol (libpthread, __pthread_cond_signal, pthread_cond_signal, +- GLIBC_2_3_2) +diff --git a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S b/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S +deleted file mode 100644 +index 82ffa1a..0000000 +--- a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S ++++ /dev/null +@@ -1,623 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <pthread-pi-defines.h> +-#include <pthread-errnos.h> +-#include <stap-probe.h> +- +-#include <kernel-features.h> +- +- +- .text +- +- +-/* int pthread_cond_timedwait (pthread_cond_t *cond, pthread_mutex_t *mutex, +- const struct timespec *abstime) */ +- .globl __pthread_cond_timedwait +- .type __pthread_cond_timedwait, @function +- .align 16 +-__pthread_cond_timedwait: +-.LSTARTCODE: +- cfi_startproc +-#ifdef SHARED +- cfi_personality(DW_EH_PE_pcrel | DW_EH_PE_sdata4 | DW_EH_PE_indirect, +- DW.ref.__gcc_personality_v0) +- cfi_lsda(DW_EH_PE_pcrel | DW_EH_PE_sdata4, .LexceptSTART) +-#else +- cfi_personality(DW_EH_PE_udata4, __gcc_personality_v0) +- cfi_lsda(DW_EH_PE_udata4, .LexceptSTART) +-#endif +- +- pushq %r12 +- cfi_adjust_cfa_offset(8) +- cfi_rel_offset(%r12, 0) +- pushq %r13 +- cfi_adjust_cfa_offset(8) +- cfi_rel_offset(%r13, 0) +- pushq %r14 +- cfi_adjust_cfa_offset(8) +- cfi_rel_offset(%r14, 0) +- pushq %r15 +- cfi_adjust_cfa_offset(8) +- cfi_rel_offset(%r15, 0) +-#define FRAME_SIZE (32+8) +- subq $FRAME_SIZE, %rsp +- cfi_adjust_cfa_offset(FRAME_SIZE) +- cfi_remember_state +- +- LIBC_PROBE (cond_timedwait, 3, %rdi, %rsi, %rdx) +- +- cmpq $1000000000, 8(%rdx) +- movl $EINVAL, %eax +- jae 48f +- +- /* Stack frame: +- +- rsp + 48 +- +--------------------------+ +- rsp + 32 | timeout value | +- +--------------------------+ +- rsp + 24 | old wake_seq value | +- +--------------------------+ +- rsp + 16 | mutex pointer | +- +--------------------------+ +- rsp + 8 | condvar pointer | +- +--------------------------+ +- rsp + 4 | old broadcast_seq value | +- +--------------------------+ +- rsp + 0 | old cancellation mode | +- +--------------------------+ +- */ +- +- LP_OP(cmp) $-1, dep_mutex(%rdi) +- +- /* Prepare structure passed to cancellation handler. */ +- movq %rdi, 8(%rsp) +- movq %rsi, 16(%rsp) +- movq %rdx, %r13 +- +- je 22f +- mov %RSI_LP, dep_mutex(%rdi) +- +-22: +- xorb %r15b, %r15b +- +- /* Get internal lock. */ +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jnz 31f +- +- /* Unlock the mutex. */ +-32: movq 16(%rsp), %rdi +- xorl %esi, %esi +- callq __pthread_mutex_unlock_usercnt +- +- testl %eax, %eax +- jne 46f +- +- movq 8(%rsp), %rdi +- incq total_seq(%rdi) +- incl cond_futex(%rdi) +- addl $(1 << nwaiters_shift), cond_nwaiters(%rdi) +- +- /* Get and store current wakeup_seq value. */ +- movq 8(%rsp), %rdi +- movq wakeup_seq(%rdi), %r9 +- movl broadcast_seq(%rdi), %edx +- movq %r9, 24(%rsp) +- movl %edx, 4(%rsp) +- +- cmpq $0, (%r13) +- movq $-ETIMEDOUT, %r14 +- js 36f +- +-38: movl cond_futex(%rdi), %r12d +- +- /* Unlock. */ +- LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- jne 33f +- +-.LcleanupSTART1: +-34: callq __pthread_enable_asynccancel +- movl %eax, (%rsp) +- +- movq %r13, %r10 +- movl $FUTEX_WAIT_BITSET, %esi +- LP_OP(cmp) $-1, dep_mutex(%rdi) +- je 60f +- +- mov dep_mutex(%rdi), %R8_LP +- /* Requeue to a non-robust PI mutex if the PI bit is set and +- the robust bit is not set. */ +- movl MUTEX_KIND(%r8), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- jne 61f +- +- movl $(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %esi +- xorl %eax, %eax +- /* The following only works like this because we only support +- two clocks, represented using a single bit. */ +- testl $1, cond_nwaiters(%rdi) +- movl $FUTEX_CLOCK_REALTIME, %edx +- cmove %edx, %eax +- orl %eax, %esi +- movq %r12, %rdx +- addq $cond_futex, %rdi +- movl $SYS_futex, %eax +- syscall +- +- cmpl $0, %eax +- sete %r15b +- +-#ifdef __ASSUME_REQUEUE_PI +- jmp 62f +-#else +- je 62f +- +- /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns +- successfully, it has already locked the mutex for us and the +- pi_flag (%r15b) is set to denote that fact. However, if another +- thread changed the futex value before we entered the wait, the +- syscall may return an EAGAIN and the mutex is not locked. We go +- ahead with a success anyway since later we look at the pi_flag to +- decide if we got the mutex or not. The sequence numbers then make +- sure that only one of the threads actually wake up. We retry using +- normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal +- and PI futexes don't mix. +- +- Note that we don't check for EAGAIN specifically; we assume that the +- only other error the futex function could return is EAGAIN (barring +- the ETIMEOUT of course, for the timeout case in futex) since +- anything else would mean an error in our function. It is too +- expensive to do that check for every call (which is quite common in +- case of a large number of threads), so it has been skipped. */ +- cmpl $-ENOSYS, %eax +- jne 62f +- +- subq $cond_futex, %rdi +-#endif +- +-61: movl $(FUTEX_WAIT_BITSET|FUTEX_PRIVATE_FLAG), %esi +-60: xorb %r15b, %r15b +- xorl %eax, %eax +- /* The following only works like this because we only support +- two clocks, represented using a single bit. */ +- testl $1, cond_nwaiters(%rdi) +- movl $FUTEX_CLOCK_REALTIME, %edx +- movl $0xffffffff, %r9d +- cmove %edx, %eax +- orl %eax, %esi +- movq %r12, %rdx +- addq $cond_futex, %rdi +- movl $SYS_futex, %eax +- syscall +-62: movq %rax, %r14 +- +- movl (%rsp), %edi +- callq __pthread_disable_asynccancel +-.LcleanupEND1: +- +- /* Lock. */ +- movq 8(%rsp), %rdi +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jne 35f +- +-36: movl broadcast_seq(%rdi), %edx +- +- movq woken_seq(%rdi), %rax +- +- movq wakeup_seq(%rdi), %r9 +- +- cmpl 4(%rsp), %edx +- jne 53f +- +- cmpq 24(%rsp), %r9 +- jbe 45f +- +- cmpq %rax, %r9 +- ja 39f +- +-45: cmpq $-ETIMEDOUT, %r14 +- je 99f +- +- /* We need to go back to futex_wait. If we're using requeue_pi, then +- release the mutex we had acquired and go back. */ +- test %r15b, %r15b +- jz 38b +- +- /* Adjust the mutex values first and then unlock it. The unlock +- should always succeed or else the kernel did not lock the +- mutex correctly. */ +- movq %r8, %rdi +- callq __pthread_mutex_cond_lock_adjust +- xorl %esi, %esi +- callq __pthread_mutex_unlock_usercnt +- /* Reload cond_var. */ +- movq 8(%rsp), %rdi +- jmp 38b +- +-99: incq wakeup_seq(%rdi) +- incl cond_futex(%rdi) +- movl $ETIMEDOUT, %r14d +- jmp 44f +- +-53: xorq %r14, %r14 +- jmp 54f +- +-39: xorq %r14, %r14 +-44: incq woken_seq(%rdi) +- +-54: subl $(1 << nwaiters_shift), cond_nwaiters(%rdi) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- cmpq $0xffffffffffffffff, total_seq(%rdi) +- jne 55f +- movl cond_nwaiters(%rdi), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 55f +- +- addq $cond_nwaiters, %rdi +- LP_OP(cmp) $-1, dep_mutex-cond_nwaiters(%rdi) +- movl $1, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- subq $cond_nwaiters, %rdi +- +-55: LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- jne 40f +- +- /* If requeue_pi is used the kernel performs the locking of the +- mutex. */ +-41: movq 16(%rsp), %rdi +- testb %r15b, %r15b +- jnz 64f +- +- callq __pthread_mutex_cond_lock +- +-63: testq %rax, %rax +- cmoveq %r14, %rax +- +-48: addq $FRAME_SIZE, %rsp +- cfi_adjust_cfa_offset(-FRAME_SIZE) +- popq %r15 +- cfi_adjust_cfa_offset(-8) +- cfi_restore(%r15) +- popq %r14 +- cfi_adjust_cfa_offset(-8) +- cfi_restore(%r14) +- popq %r13 +- cfi_adjust_cfa_offset(-8) +- cfi_restore(%r13) +- popq %r12 +- cfi_adjust_cfa_offset(-8) +- cfi_restore(%r12) +- +- retq +- +- cfi_restore_state +- +-64: callq __pthread_mutex_cond_lock_adjust +- movq %r14, %rax +- jmp 48b +- +- /* Initial locking failed. */ +-31: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +- jmp 32b +- +- /* Unlock in loop requires wakeup. */ +-33: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- jmp 34b +- +- /* Locking in loop failed. */ +-35: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- jmp 36b +- +- /* Unlock after loop requires wakeup. */ +-40: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- jmp 41b +- +- /* The initial unlocking of the mutex failed. */ +-46: movq 8(%rsp), %rdi +- movq %rax, (%rsp) +- LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- jne 47f +- +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- +-47: movq (%rsp), %rax +- jmp 48b +- +- .size __pthread_cond_timedwait, .-__pthread_cond_timedwait +-versioned_symbol (libpthread, __pthread_cond_timedwait, pthread_cond_timedwait, +- GLIBC_2_3_2) +- +- +- .align 16 +- .type __condvar_cleanup2, @function +-__condvar_cleanup2: +- /* Stack frame: +- +- rsp + 72 +- +--------------------------+ +- rsp + 64 | %r12 | +- +--------------------------+ +- rsp + 56 | %r13 | +- +--------------------------+ +- rsp + 48 | %r14 | +- +--------------------------+ +- rsp + 24 | unused | +- +--------------------------+ +- rsp + 16 | mutex pointer | +- +--------------------------+ +- rsp + 8 | condvar pointer | +- +--------------------------+ +- rsp + 4 | old broadcast_seq value | +- +--------------------------+ +- rsp + 0 | old cancellation mode | +- +--------------------------+ +- */ +- +- movq %rax, 24(%rsp) +- +- /* Get internal lock. */ +- movq 8(%rsp), %rdi +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jz 1f +- +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- +-1: movl broadcast_seq(%rdi), %edx +- cmpl 4(%rsp), %edx +- jne 3f +- +- /* We increment the wakeup_seq counter only if it is lower than +- total_seq. If this is not the case the thread was woken and +- then canceled. In this case we ignore the signal. */ +- movq total_seq(%rdi), %rax +- cmpq wakeup_seq(%rdi), %rax +- jbe 6f +- incq wakeup_seq(%rdi) +- incl cond_futex(%rdi) +-6: incq woken_seq(%rdi) +- +-3: subl $(1 << nwaiters_shift), cond_nwaiters(%rdi) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- xorq %r12, %r12 +- cmpq $0xffffffffffffffff, total_seq(%rdi) +- jne 4f +- movl cond_nwaiters(%rdi), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 4f +- +- LP_OP(cmp) $-1, dep_mutex(%rdi) +- leaq cond_nwaiters(%rdi), %rdi +- movl $1, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- subq $cond_nwaiters, %rdi +- movl $1, %r12d +- +-4: LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- je 2f +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- +- /* Wake up all waiters to make sure no signal gets lost. */ +-2: testq %r12, %r12 +- jnz 5f +- addq $cond_futex, %rdi +- LP_OP(cmp) $-1, dep_mutex-cond_futex(%rdi) +- movl $0x7fffffff, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- +- /* Lock the mutex only if we don't own it already. This only happens +- in case of PI mutexes, if we got cancelled after a successful +- return of the futex syscall and before disabling async +- cancellation. */ +-5: movq 16(%rsp), %rdi +- movl MUTEX_KIND(%rdi), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- jne 7f +- +- movl (%rdi), %eax +- andl $TID_MASK, %eax +- cmpl %eax, %fs:TID +- jne 7f +- /* We managed to get the lock. Fix it up before returning. */ +- callq __pthread_mutex_cond_lock_adjust +- jmp 8f +- +-7: callq __pthread_mutex_cond_lock +- +-8: movq 24(%rsp), %rdi +- movq FRAME_SIZE(%rsp), %r15 +- movq FRAME_SIZE+8(%rsp), %r14 +- movq FRAME_SIZE+16(%rsp), %r13 +- movq FRAME_SIZE+24(%rsp), %r12 +-.LcallUR: +- call _Unwind_Resume +- hlt +-.LENDCODE: +- cfi_endproc +- .size __condvar_cleanup2, .-__condvar_cleanup2 +- +- +- .section .gcc_except_table,"a",@progbits +-.LexceptSTART: +- .byte DW_EH_PE_omit # @LPStart format +- .byte DW_EH_PE_omit # @TType format +- .byte DW_EH_PE_uleb128 # call-site format +- .uleb128 .Lcstend-.Lcstbegin +-.Lcstbegin: +- .uleb128 .LcleanupSTART1-.LSTARTCODE +- .uleb128 .LcleanupEND1-.LcleanupSTART1 +- .uleb128 __condvar_cleanup2-.LSTARTCODE +- .uleb128 0 +- .uleb128 .LcallUR-.LSTARTCODE +- .uleb128 .LENDCODE-.LcallUR +- .uleb128 0 +- .uleb128 0 +-.Lcstend: +- +- +-#ifdef SHARED +- .hidden DW.ref.__gcc_personality_v0 +- .weak DW.ref.__gcc_personality_v0 +- .section .gnu.linkonce.d.DW.ref.__gcc_personality_v0,"aw",@progbits +- .align LP_SIZE +- .type DW.ref.__gcc_personality_v0, @object +- .size DW.ref.__gcc_personality_v0, LP_SIZE +-DW.ref.__gcc_personality_v0: +- ASM_ADDR __gcc_personality_v0 +-#endif +diff --git a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S b/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S +deleted file mode 100644 +index c82f37b..0000000 +--- a/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S ++++ /dev/null +@@ -1,555 +0,0 @@ +-/* Copyright (C) 2002-2016 Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, see +- <http://www.gnu.org/licenses/>. */ +- +-#include <sysdep.h> +-#include <shlib-compat.h> +-#include <lowlevellock.h> +-#include <lowlevelcond.h> +-#include <tcb-offsets.h> +-#include <pthread-pi-defines.h> +-#include <pthread-errnos.h> +-#include <stap-probe.h> +- +-#include <kernel-features.h> +- +- +- .text +- +-/* int pthread_cond_wait (pthread_cond_t *cond, pthread_mutex_t *mutex) */ +- .globl __pthread_cond_wait +- .type __pthread_cond_wait, @function +- .align 16 +-__pthread_cond_wait: +-.LSTARTCODE: +- cfi_startproc +-#ifdef SHARED +- cfi_personality(DW_EH_PE_pcrel | DW_EH_PE_sdata4 | DW_EH_PE_indirect, +- DW.ref.__gcc_personality_v0) +- cfi_lsda(DW_EH_PE_pcrel | DW_EH_PE_sdata4, .LexceptSTART) +-#else +- cfi_personality(DW_EH_PE_udata4, __gcc_personality_v0) +- cfi_lsda(DW_EH_PE_udata4, .LexceptSTART) +-#endif +- +-#define FRAME_SIZE (32+8) +- leaq -FRAME_SIZE(%rsp), %rsp +- cfi_adjust_cfa_offset(FRAME_SIZE) +- +- /* Stack frame: +- +- rsp + 32 +- +--------------------------+ +- rsp + 24 | old wake_seq value | +- +--------------------------+ +- rsp + 16 | mutex pointer | +- +--------------------------+ +- rsp + 8 | condvar pointer | +- +--------------------------+ +- rsp + 4 | old broadcast_seq value | +- +--------------------------+ +- rsp + 0 | old cancellation mode | +- +--------------------------+ +- */ +- +- LIBC_PROBE (cond_wait, 2, %rdi, %rsi) +- +- LP_OP(cmp) $-1, dep_mutex(%rdi) +- +- /* Prepare structure passed to cancellation handler. */ +- movq %rdi, 8(%rsp) +- movq %rsi, 16(%rsp) +- +- je 15f +- mov %RSI_LP, dep_mutex(%rdi) +- +- /* Get internal lock. */ +-15: movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jne 1f +- +- /* Unlock the mutex. */ +-2: movq 16(%rsp), %rdi +- xorl %esi, %esi +- callq __pthread_mutex_unlock_usercnt +- +- testl %eax, %eax +- jne 12f +- +- movq 8(%rsp), %rdi +- incq total_seq(%rdi) +- incl cond_futex(%rdi) +- addl $(1 << nwaiters_shift), cond_nwaiters(%rdi) +- +- /* Get and store current wakeup_seq value. */ +- movq 8(%rsp), %rdi +- movq wakeup_seq(%rdi), %r9 +- movl broadcast_seq(%rdi), %edx +- movq %r9, 24(%rsp) +- movl %edx, 4(%rsp) +- +- /* Unlock. */ +-8: movl cond_futex(%rdi), %edx +- LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- jne 3f +- +-.LcleanupSTART: +-4: callq __pthread_enable_asynccancel +- movl %eax, (%rsp) +- +- xorq %r10, %r10 +- LP_OP(cmp) $-1, dep_mutex(%rdi) +- leaq cond_futex(%rdi), %rdi +- movl $FUTEX_WAIT, %esi +- je 60f +- +- mov dep_mutex-cond_futex(%rdi), %R8_LP +- /* Requeue to a non-robust PI mutex if the PI bit is set and +- the robust bit is not set. */ +- movl MUTEX_KIND(%r8), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- jne 61f +- +- movl $(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %esi +- movl $SYS_futex, %eax +- syscall +- +- cmpl $0, %eax +- sete %r8b +- +-#ifdef __ASSUME_REQUEUE_PI +- jmp 62f +-#else +- je 62f +- +- /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns +- successfully, it has already locked the mutex for us and the +- pi_flag (%r8b) is set to denote that fact. However, if another +- thread changed the futex value before we entered the wait, the +- syscall may return an EAGAIN and the mutex is not locked. We go +- ahead with a success anyway since later we look at the pi_flag to +- decide if we got the mutex or not. The sequence numbers then make +- sure that only one of the threads actually wake up. We retry using +- normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal +- and PI futexes don't mix. +- +- Note that we don't check for EAGAIN specifically; we assume that the +- only other error the futex function could return is EAGAIN since +- anything else would mean an error in our function. It is too +- expensive to do that check for every call (which is quite common in +- case of a large number of threads), so it has been skipped. */ +- cmpl $-ENOSYS, %eax +- jne 62f +- +-# ifndef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAIT, %esi +-# endif +-#endif +- +-61: +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $(FUTEX_WAIT|FUTEX_PRIVATE_FLAG), %esi +-#else +- orl %fs:PRIVATE_FUTEX, %esi +-#endif +-60: xorb %r8b, %r8b +- movl $SYS_futex, %eax +- syscall +- +-62: movl (%rsp), %edi +- callq __pthread_disable_asynccancel +-.LcleanupEND: +- +- /* Lock. */ +- movq 8(%rsp), %rdi +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jnz 5f +- +-6: movl broadcast_seq(%rdi), %edx +- +- movq woken_seq(%rdi), %rax +- +- movq wakeup_seq(%rdi), %r9 +- +- cmpl 4(%rsp), %edx +- jne 16f +- +- cmpq 24(%rsp), %r9 +- jbe 19f +- +- cmpq %rax, %r9 +- jna 19f +- +- incq woken_seq(%rdi) +- +- /* Unlock */ +-16: subl $(1 << nwaiters_shift), cond_nwaiters(%rdi) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- cmpq $0xffffffffffffffff, total_seq(%rdi) +- jne 17f +- movl cond_nwaiters(%rdi), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 17f +- +- addq $cond_nwaiters, %rdi +- LP_OP(cmp) $-1, dep_mutex-cond_nwaiters(%rdi) +- movl $1, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- subq $cond_nwaiters, %rdi +- +-17: LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- jne 10f +- +- /* If requeue_pi is used the kernel performs the locking of the +- mutex. */ +-11: movq 16(%rsp), %rdi +- testb %r8b, %r8b +- jnz 18f +- +- callq __pthread_mutex_cond_lock +- +-14: leaq FRAME_SIZE(%rsp), %rsp +- cfi_adjust_cfa_offset(-FRAME_SIZE) +- +- /* We return the result of the mutex_lock operation. */ +- retq +- +- cfi_adjust_cfa_offset(FRAME_SIZE) +- +-18: callq __pthread_mutex_cond_lock_adjust +- xorl %eax, %eax +- jmp 14b +- +- /* We need to go back to futex_wait. If we're using requeue_pi, then +- release the mutex we had acquired and go back. */ +-19: testb %r8b, %r8b +- jz 8b +- +- /* Adjust the mutex values first and then unlock it. The unlock +- should always succeed or else the kernel did not lock the mutex +- correctly. */ +- movq 16(%rsp), %rdi +- callq __pthread_mutex_cond_lock_adjust +- movq %rdi, %r8 +- xorl %esi, %esi +- callq __pthread_mutex_unlock_usercnt +- /* Reload cond_var. */ +- movq 8(%rsp), %rdi +- jmp 8b +- +- /* Initial locking failed. */ +-1: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +- jmp 2b +- +- /* Unlock in loop requires wakeup. */ +-3: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- /* The call preserves %rdx. */ +- callq __lll_unlock_wake +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- jmp 4b +- +- /* Locking in loop failed. */ +-5: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- jmp 6b +- +- /* Unlock after loop requires wakeup. */ +-10: +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- jmp 11b +- +- /* The initial unlocking of the mutex failed. */ +-12: movq %rax, %r10 +- movq 8(%rsp), %rdi +- LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- je 13f +- +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_unlock_wake +- +-13: movq %r10, %rax +- jmp 14b +- +- .size __pthread_cond_wait, .-__pthread_cond_wait +-versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait, +- GLIBC_2_3_2) +- +- +- .align 16 +- .type __condvar_cleanup1, @function +- .globl __condvar_cleanup1 +- .hidden __condvar_cleanup1 +-__condvar_cleanup1: +- /* Stack frame: +- +- rsp + 32 +- +--------------------------+ +- rsp + 24 | unused | +- +--------------------------+ +- rsp + 16 | mutex pointer | +- +--------------------------+ +- rsp + 8 | condvar pointer | +- +--------------------------+ +- rsp + 4 | old broadcast_seq value | +- +--------------------------+ +- rsp + 0 | old cancellation mode | +- +--------------------------+ +- */ +- +- movq %rax, 24(%rsp) +- +- /* Get internal lock. */ +- movq 8(%rsp), %rdi +- movl $1, %esi +- xorl %eax, %eax +- LOCK +-#if cond_lock == 0 +- cmpxchgl %esi, (%rdi) +-#else +- cmpxchgl %esi, cond_lock(%rdi) +-#endif +- jz 1f +- +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- callq __lll_lock_wait +-#if cond_lock != 0 +- subq $cond_lock, %rdi +-#endif +- +-1: movl broadcast_seq(%rdi), %edx +- cmpl 4(%rsp), %edx +- jne 3f +- +- /* We increment the wakeup_seq counter only if it is lower than +- total_seq. If this is not the case the thread was woken and +- then canceled. In this case we ignore the signal. */ +- movq total_seq(%rdi), %rax +- cmpq wakeup_seq(%rdi), %rax +- jbe 6f +- incq wakeup_seq(%rdi) +- incl cond_futex(%rdi) +-6: incq woken_seq(%rdi) +- +-3: subl $(1 << nwaiters_shift), cond_nwaiters(%rdi) +- +- /* Wake up a thread which wants to destroy the condvar object. */ +- xorl %ecx, %ecx +- cmpq $0xffffffffffffffff, total_seq(%rdi) +- jne 4f +- movl cond_nwaiters(%rdi), %eax +- andl $~((1 << nwaiters_shift) - 1), %eax +- jne 4f +- +- LP_OP(cmp) $-1, dep_mutex(%rdi) +- leaq cond_nwaiters(%rdi), %rdi +- movl $1, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- subq $cond_nwaiters, %rdi +- movl $1, %ecx +- +-4: LOCK +-#if cond_lock == 0 +- decl (%rdi) +-#else +- decl cond_lock(%rdi) +-#endif +- je 2f +-#if cond_lock != 0 +- addq $cond_lock, %rdi +-#endif +- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi) +- movl $LLL_PRIVATE, %eax +- movl $LLL_SHARED, %esi +- cmovne %eax, %esi +- /* The call preserves %rcx. */ +- callq __lll_unlock_wake +- +- /* Wake up all waiters to make sure no signal gets lost. */ +-2: testl %ecx, %ecx +- jnz 5f +- addq $cond_futex, %rdi +- LP_OP(cmp) $-1, dep_mutex-cond_futex(%rdi) +- movl $0x7fffffff, %edx +-#ifdef __ASSUME_PRIVATE_FUTEX +- movl $FUTEX_WAKE, %eax +- movl $(FUTEX_WAKE|FUTEX_PRIVATE_FLAG), %esi +- cmove %eax, %esi +-#else +- movl $0, %eax +- movl %fs:PRIVATE_FUTEX, %esi +- cmove %eax, %esi +- orl $FUTEX_WAKE, %esi +-#endif +- movl $SYS_futex, %eax +- syscall +- +- /* Lock the mutex only if we don't own it already. This only happens +- in case of PI mutexes, if we got cancelled after a successful +- return of the futex syscall and before disabling async +- cancellation. */ +-5: movq 16(%rsp), %rdi +- movl MUTEX_KIND(%rdi), %eax +- andl $(ROBUST_BIT|PI_BIT), %eax +- cmpl $PI_BIT, %eax +- jne 7f +- +- movl (%rdi), %eax +- andl $TID_MASK, %eax +- cmpl %eax, %fs:TID +- jne 7f +- /* We managed to get the lock. Fix it up before returning. */ +- callq __pthread_mutex_cond_lock_adjust +- jmp 8f +- +- +-7: callq __pthread_mutex_cond_lock +- +-8: movq 24(%rsp), %rdi +-.LcallUR: +- call _Unwind_Resume +- hlt +-.LENDCODE: +- cfi_endproc +- .size __condvar_cleanup1, .-__condvar_cleanup1 +- +- +- .section .gcc_except_table,"a",@progbits +-.LexceptSTART: +- .byte DW_EH_PE_omit # @LPStart format +- .byte DW_EH_PE_omit # @TType format +- .byte DW_EH_PE_uleb128 # call-site format +- .uleb128 .Lcstend-.Lcstbegin +-.Lcstbegin: +- .uleb128 .LcleanupSTART-.LSTARTCODE +- .uleb128 .LcleanupEND-.LcleanupSTART +- .uleb128 __condvar_cleanup1-.LSTARTCODE +- .uleb128 0 +- .uleb128 .LcallUR-.LSTARTCODE +- .uleb128 .LENDCODE-.LcallUR +- .uleb128 0 +- .uleb128 0 +-.Lcstend: +- +- +-#ifdef SHARED +- .hidden DW.ref.__gcc_personality_v0 +- .weak DW.ref.__gcc_personality_v0 +- .section .gnu.linkonce.d.DW.ref.__gcc_personality_v0,"aw",@progbits +- .align LP_SIZE +- .type DW.ref.__gcc_personality_v0, @object +- .size DW.ref.__gcc_personality_v0, LP_SIZE +-DW.ref.__gcc_personality_v0: +- ASM_ADDR __gcc_personality_v0 +-#endif +diff --git a/sysdeps/x86/bits/pthreadtypes.h b/sysdeps/x86/bits/pthreadtypes.h +index 16b8f4f..a3a738f 100644 +--- a/sysdeps/x86/bits/pthreadtypes.h ++++ b/sysdeps/x86/bits/pthreadtypes.h +@@ -140,14 +140,27 @@ typedef union + { + struct + { +- int __lock; +- unsigned int __futex; +- __extension__ unsigned long long int __total_seq; +- __extension__ unsigned long long int __wakeup_seq; +- __extension__ unsigned long long int __woken_seq; +- void *__mutex; +- unsigned int __nwaiters; +- unsigned int __broadcast_seq; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __wseq; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __wseq32; ++ }; ++ __extension__ union ++ { ++ __extension__ unsigned long long int __g1_start; ++ struct { ++ unsigned int __low; ++ unsigned int __high; ++ } __g1_start32; ++ }; ++ unsigned int __g_refs[2]; ++ unsigned int __g_size[2]; ++ unsigned int __g1_orig_size; ++ unsigned int __wrefs; ++ unsigned int __g_signals[2]; + } __data; + char __size[__SIZEOF_PTHREAD_COND_T]; + __extension__ long long int __align; +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0005-Remove-__ASSUME_REQUEUE_PI.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0005-Remove-__ASSUME_REQUEUE_PI.patch new file mode 100644 index 000000000..8d4ba4107 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0005-Remove-__ASSUME_REQUEUE_PI.patch @@ -0,0 +1,149 @@ +From 27b7131d3d8133bf3a5ce72d4e4ff4dfadd71f20 Mon Sep 17 00:00:00 2001 +From: Catalin Enache <catalin.enache@windriver.com> +Date: Fri, 30 Jun 2017 12:08:29 +0300 +Subject: [PATCH 5/6] Remove __ASSUME_REQUEUE_PI + +The new cond var implementation (ed19993b5b0d) removed all the +__ASSUME_{REQUEUE_PI,FUTEX_LOCK_PI} internal usage so there is no +need to keep defining it. This patch removes all USE_REQUEUE_PI +and __ASSUME_REQUEUE_PI. It is as follow up from BZ#18463. + +Checked with a build for x86_64-linux-gnu, arm-linux-gnueabhf, +m68-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. + + * nptl/pthreadP.h (USE_REQUEUE_PI): Remove ununsed macro. + * sysdeps/unix/sysv/linux/arm/kernel-features.h + (__ASSUME_REQUEUE_PI): Likewise. + * sysdeps/unix/sysv/linux/kernel-features.h + (__ASSUME_REQUEUE_PI): Likewise. + * sysdeps/unix/sysv/linux/m68k/kernel-features.h + (__ASSUME_REQUEUE_PI): Likewise. + * sysdeps/unix/sysv/linux/mips/kernel-features.h + (__ASSUME_REQUEUE_PI): Likewise. + * sysdeps/unix/sysv/linux/sparc/kernel-features.h + (__ASSUME_REQUEUE_PI): Likewise. + +Upstream-Status: Backport + +Author: Adhemerval Zanella <adhemerval.zanella@linaro.org> +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + ChangeLog | 14 ++++++++++++++ + nptl/pthreadP.h | 12 ------------ + sysdeps/unix/sysv/linux/arm/kernel-features.h | 1 - + sysdeps/unix/sysv/linux/kernel-features.h | 5 ----- + sysdeps/unix/sysv/linux/m68k/kernel-features.h | 1 - + sysdeps/unix/sysv/linux/mips/kernel-features.h | 1 - + sysdeps/unix/sysv/linux/sparc/kernel-features.h | 1 - + 7 files changed, 14 insertions(+), 21 deletions(-) + +diff --git a/ChangeLog b/ChangeLog +index c94db7b..44c518b 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,17 @@ ++2017-04-04 Adhemerval Zanella <adhemerval.zanella@linaro.org> ++ ++ * nptl/pthreadP.h (USE_REQUEUE_PI): Remove ununsed macro. ++ * sysdeps/unix/sysv/linux/arm/kernel-features.h ++ (__ASSUME_REQUEUE_PI): Likewise. ++ * sysdeps/unix/sysv/linux/kernel-features.h ++ (__ASSUME_REQUEUE_PI): Likewise. ++ * sysdeps/unix/sysv/linux/m68k/kernel-features.h ++ (__ASSUME_REQUEUE_PI): Likewise. ++ * sysdeps/unix/sysv/linux/mips/kernel-features.h ++ (__ASSUME_REQUEUE_PI): Likewise. ++ * sysdeps/unix/sysv/linux/sparc/kernel-features.h ++ (__ASSUME_REQUEUE_PI): Likewise. ++ + 2016-12-31 Torvald Riegel <triegel@redhat.com> + + [BZ #13165] +diff --git a/nptl/pthreadP.h b/nptl/pthreadP.h +index e9992bc..730c4ad 100644 +--- a/nptl/pthreadP.h ++++ b/nptl/pthreadP.h +@@ -594,18 +594,6 @@ extern void __wait_lookup_done (void) attribute_hidden; + # define PTHREAD_STATIC_FN_REQUIRE(name) __asm (".globl " #name); + #endif + +-/* Test if the mutex is suitable for the FUTEX_WAIT_REQUEUE_PI operation. */ +-#if (defined lll_futex_wait_requeue_pi \ +- && defined __ASSUME_REQUEUE_PI) +-# define USE_REQUEUE_PI(mut) \ +- ((mut) && (mut) != (void *) ~0l \ +- && (((mut)->__data.__kind \ +- & (PTHREAD_MUTEX_PRIO_INHERIT_NP | PTHREAD_MUTEX_ROBUST_NORMAL_NP)) \ +- == PTHREAD_MUTEX_PRIO_INHERIT_NP)) +-#else +-# define USE_REQUEUE_PI(mut) 0 +-#endif +- + /* Returns 0 if POL is a valid scheduling policy. */ + static inline int + check_sched_policy_attr (int pol) +diff --git a/sysdeps/unix/sysv/linux/arm/kernel-features.h b/sysdeps/unix/sysv/linux/arm/kernel-features.h +index 6ca607e..339ad45 100644 +--- a/sysdeps/unix/sysv/linux/arm/kernel-features.h ++++ b/sysdeps/unix/sysv/linux/arm/kernel-features.h +@@ -23,7 +23,6 @@ + futex_atomic_cmpxchg_inatomic, depending on kernel + configuration. */ + #if __LINUX_KERNEL_VERSION < 0x030E03 +-# undef __ASSUME_REQUEUE_PI + # undef __ASSUME_SET_ROBUST_LIST + #endif + +diff --git a/sysdeps/unix/sysv/linux/kernel-features.h b/sysdeps/unix/sysv/linux/kernel-features.h +index 1d3b554..9f2cf9f 100644 +--- a/sysdeps/unix/sysv/linux/kernel-features.h ++++ b/sysdeps/unix/sysv/linux/kernel-features.h +@@ -101,11 +101,6 @@ + #define __ASSUME_PREADV 1 + #define __ASSUME_PWRITEV 1 + +-/* Support for FUTEX_*_REQUEUE_PI was added in 2.6.31 (but some +- architectures lack futex_atomic_cmpxchg_inatomic in some +- configurations). */ +-#define __ASSUME_REQUEUE_PI 1 +- + /* Support for recvmmsg functionality was added in 2.6.33. The macros + defined correspond to those for accept4. */ + #if __LINUX_KERNEL_VERSION >= 0x020621 +diff --git a/sysdeps/unix/sysv/linux/m68k/kernel-features.h b/sysdeps/unix/sysv/linux/m68k/kernel-features.h +index 46ec601..174c1c6 100644 +--- a/sysdeps/unix/sysv/linux/m68k/kernel-features.h ++++ b/sysdeps/unix/sysv/linux/m68k/kernel-features.h +@@ -51,6 +51,5 @@ + + /* No support for PI futexes or robust mutexes before 3.10 for m68k. */ + #if __LINUX_KERNEL_VERSION < 0x030a00 +-# undef __ASSUME_REQUEUE_PI + # undef __ASSUME_SET_ROBUST_LIST + #endif +diff --git a/sysdeps/unix/sysv/linux/mips/kernel-features.h b/sysdeps/unix/sysv/linux/mips/kernel-features.h +index b486d90..a795911c 100644 +--- a/sysdeps/unix/sysv/linux/mips/kernel-features.h ++++ b/sysdeps/unix/sysv/linux/mips/kernel-features.h +@@ -24,7 +24,6 @@ + /* The MIPS kernel does not support futex_atomic_cmpxchg_inatomic if + emulating LL/SC. */ + #if __mips == 1 || defined _MIPS_ARCH_R5900 +-# undef __ASSUME_REQUEUE_PI + # undef __ASSUME_SET_ROBUST_LIST + #endif + +diff --git a/sysdeps/unix/sysv/linux/sparc/kernel-features.h b/sysdeps/unix/sysv/linux/sparc/kernel-features.h +index 69c9c7c..dd3ddf0 100644 +--- a/sysdeps/unix/sysv/linux/sparc/kernel-features.h ++++ b/sysdeps/unix/sysv/linux/sparc/kernel-features.h +@@ -34,6 +34,5 @@ + /* 32-bit SPARC kernels do not support + futex_atomic_cmpxchg_inatomic. */ + #if !defined __arch64__ && !defined __sparc_v9__ +-# undef __ASSUME_REQUEUE_PI + # undef __ASSUME_SET_ROBUST_LIST + #endif +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0006-Fix-atomic_fetch_xor_release.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0006-Fix-atomic_fetch_xor_release.patch new file mode 100644 index 000000000..7616efa18 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0006-Fix-atomic_fetch_xor_release.patch @@ -0,0 +1,81 @@ +From b671f20cc160238b62894d032a55baf85867106e Mon Sep 17 00:00:00 2001 +From: Catalin Enache <catalin.enache@windriver.com> +Date: Fri, 30 Jun 2017 19:12:43 +0300 +Subject: [PATCH 6/6] Fix atomic_fetch_xor_release. + +No code uses atomic_fetch_xor_release except for the upcoming +conditional variable rewrite. Therefore there is no user +visible bug here. The use of atomic_compare_and_exchange_bool_rel +is removed (since it doesn't exist anymore), and is replaced +by atomic_compare_exchange_weak_release. + +We use weak_release because it provides better performance in +the loop (the weak semantic) and because the xor is release MO +(the release semantic). We don't reload expected in the loop +because atomic_compare_and_exchange_weak_release does this for +us as part of the CAS failure. + +It is otherwise a fairly plain conversion that fixes building +the new condvar for 32-bit x86. Passes all regression tests +for x86. + +Upstream-Status: Backport + +Author: Carlos O'Donell <carlos@systemhalted.org> +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + ChangeLog | 6 ++++++ + include/atomic.h | 19 +++++++++++-------- + 2 files changed, 17 insertions(+), 8 deletions(-) + +diff --git a/ChangeLog b/ChangeLog +index 44c518b..893262d 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,9 @@ ++2016-10-26 Carlos O'Donell <carlos@redhat.com> ++ ++ * include/atomic.h ++ [USE_COMPILER_ATOMIC_BUILTINS && !atomic_fetch_xor_release] ++ (atomic_fetch_xor_release): Use atomic_compare_exchange_weak_release. ++ + 2017-04-04 Adhemerval Zanella <adhemerval.zanella@linaro.org> + + * nptl/pthreadP.h (USE_REQUEUE_PI): Remove ununsed macro. +diff --git a/include/atomic.h b/include/atomic.h +index 5a8e7e7..c8b4664 100644 +--- a/include/atomic.h ++++ b/include/atomic.h +@@ -777,18 +777,21 @@ void __atomic_link_error (void); + # endif + + # ifndef atomic_fetch_xor_release ++/* Failing the atomic_compare_exchange_weak_release reloads the value in ++ __atg104_expected, so we need only do the XOR again and retry. */ + # define atomic_fetch_xor_release(mem, operand) \ +- ({ __typeof (*(mem)) __atg104_old; \ +- __typeof (mem) __atg104_memp = (mem); \ ++ ({ __typeof (mem) __atg104_memp = (mem); \ ++ __typeof (*(mem)) __atg104_expected = (*__atg104_memp); \ ++ __typeof (*(mem)) __atg104_desired; \ + __typeof (*(mem)) __atg104_op = (operand); \ + \ + do \ +- __atg104_old = (*__atg104_memp); \ +- while (__builtin_expect \ +- (atomic_compare_and_exchange_bool_rel ( \ +- __atg104_memp, __atg104_old ^ __atg104_op, __atg104_old), 0));\ +- \ +- __atg104_old; }) ++ __atg104_desired = __atg104_expected ^ __atg104_op; \ ++ while (__glibc_unlikely \ ++ (atomic_compare_exchange_weak_release ( \ ++ __atg104_memp, &__atg104_expected, __atg104_desired) \ ++ == 0)); \ ++ __atg104_expected; }) + #endif + + #endif /* !USE_ATOMIC_COMPILER_BUILTINS */ +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0028-Bug-20116-Fix-use-after-free-in-pthread_create.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0028-Bug-20116-Fix-use-after-free-in-pthread_create.patch new file mode 100644 index 000000000..66f1fcd0f --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/0028-Bug-20116-Fix-use-after-free-in-pthread_create.patch @@ -0,0 +1,668 @@ +From e7ba24f05d86acf7072e066ea6d7b235a106688c Mon Sep 17 00:00:00 2001 +From: Carlos O'Donell <carlos@redhat.com> +Date: Sat, 28 Jan 2017 19:13:34 -0500 +Subject: [PATCH] Bug 20116: Fix use after free in pthread_create() + +The commit documents the ownership rules around 'struct pthread' and +when a thread can read or write to the descriptor. With those ownership +rules in place it becomes obvious that pd->stopped_start should not be +touched in several of the paths during thread startup, particularly so +for detached threads. In the case of detached threads, between the time +the thread is created by the OS kernel and the creating thread checks +pd->stopped_start, the detached thread might have already exited and the +memory for pd unmapped. As a regression test we add a simple test which +exercises this exact case by quickly creating detached threads with +large enough stacks to ensure the thread stack cache is bypassed and the +stacks are unmapped. Before the fix the testcase segfaults, after the +fix it works correctly and completes without issue. + +For a detailed discussion see: +https://www.sourceware.org/ml/libc-alpha/2017-01/msg00505.html + +(cherry-picked from commit f8bf15febcaf137bbec5a61101e88cd5a9d56ca8) + +Upstream-Status: Backport [master] +Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com> +--- + ChangeLog | 23 ++++ + nptl/Makefile | 3 +- + nptl/createthread.c | 10 +- + nptl/pthread_create.c | 207 +++++++++++++++++++++++++++------ + nptl/pthread_getschedparam.c | 1 + + nptl/pthread_setschedparam.c | 1 + + nptl/pthread_setschedprio.c | 1 + + nptl/tpp.c | 2 + + nptl/tst-create-detached.c | 137 ++++++++++++++++++++++ + sysdeps/nacl/createthread.c | 10 +- + sysdeps/unix/sysv/linux/createthread.c | 16 ++- + 11 files changed, 356 insertions(+), 55 deletions(-) + create mode 100644 nptl/tst-create-detached.c + +diff --git a/ChangeLog b/ChangeLog +index 84ae7a7af8..0fbda9020e 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,26 @@ ++2016-01-28 Carlos O'Donell <carlos@redhat.com> ++ Alexey Makhalov <amakhalov@vmware.com> ++ Florian Weimer <fweimer@redhat.com> ++ ++ [BZ #20116] ++ * nptl/pthread_create.c: Document concurrency notes. ++ Enhance thread creation notes. ++ (create_thread): Use bool *stopped_start. ++ (START_THREAD_DEFN): Comment ownership of PD. ++ (__pthread_create_2_1): Add local bool stopped_start and use ++ that instead of pd->stopped_start where appropriate. ++ * nptl/createthread.c (create_thread): Use bool *stopped_start. ++ * sysdeps/nacl/createthread.c (create_thread): Use bool *stopped_start. ++ * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. ++ * nptl/tst-create-detached.c: New file. ++ * nptl/Makefile (tests): Add tst-create-detached. ++ * nptl/pthread_getschedparam.c (__pthread_getschedparam): ++ Reference the enhanced thread creation notes. ++ * nptl/pthread_setschedparam.c (__pthread_setschedparam): Likewise. ++ * nptl/pthread_setschedprio.c (pthread_setschedprio): Likewise. ++ * nptl/tpp.c (__pthread_tpp_change_priority): Likewise. ++ (__pthread_current_priority): Likewise. ++ + 2016-08-04 Carlos O'Donell <carlos@redhat.com> + + * po/de.po: Update from Translation Project. +diff --git a/nptl/Makefile b/nptl/Makefile +index 0d8aadebed..7dec4edb53 100644 +--- a/nptl/Makefile ++++ b/nptl/Makefile +@@ -290,7 +290,8 @@ tests = tst-typesizes \ + tst-initializers1 $(addprefix tst-initializers1-,\ + c89 gnu89 c99 gnu99 c11 gnu11) \ + tst-bad-schedattr \ +- tst-thread_local1 tst-mutex-errorcheck tst-robust10 ++ tst-thread_local1 tst-mutex-errorcheck tst-robust10 \ ++ tst-create-detached \ + xtests = tst-setuid1 tst-setuid1-static tst-setuid2 \ + tst-mutexpp1 tst-mutexpp6 tst-mutexpp10 + test-srcs = tst-oddstacklimit +diff --git a/nptl/createthread.c b/nptl/createthread.c +index ba2f9c7167..328f85865d 100644 +--- a/nptl/createthread.c ++++ b/nptl/createthread.c +@@ -25,16 +25,14 @@ + + static int + create_thread (struct pthread *pd, const struct pthread_attr *attr, +- bool stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran) ++ bool *stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran) + { + /* If the implementation needs to do some tweaks to the thread after + it has been created at the OS level, it can set STOPPED_START here. */ + +- pd->stopped_start = stopped_start; +- if (__glibc_unlikely (stopped_start)) +- /* We make sure the thread does not run far by forcing it to get a +- lock. We lock it here too so that the new thread cannot continue +- until we tell it to. */ ++ pd->stopped_start = *stopped_start; ++ if (__glibc_unlikely (*stopped_start)) ++ /* See CONCURRENCY NOTES in nptl/pthread_create.c. */ + lll_lock (pd->lock, LLL_PRIVATE); + + return ENOSYS; +diff --git a/nptl/pthread_create.c b/nptl/pthread_create.c +index a834063ad5..44b17bec86 100644 +--- a/nptl/pthread_create.c ++++ b/nptl/pthread_create.c +@@ -54,25 +54,141 @@ unsigned int __nptl_nthreads = 1; + /* Code to allocate and deallocate a stack. */ + #include "allocatestack.c" + +-/* createthread.c defines this function, and two macros: ++/* CONCURRENCY NOTES: ++ ++ Understanding who is the owner of the 'struct pthread' or 'PD' ++ (refers to the value of the 'struct pthread *pd' function argument) ++ is critically important in determining exactly which operations are ++ allowed and which are not and when, particularly when it comes to the ++ implementation of pthread_create, pthread_join, pthread_detach, and ++ other functions which all operate on PD. ++ ++ The owner of PD is responsible for freeing the final resources ++ associated with PD, and may examine the memory underlying PD at any ++ point in time until it frees it back to the OS or to reuse by the ++ runtime. ++ ++ The thread which calls pthread_create is called the creating thread. ++ The creating thread begins as the owner of PD. ++ ++ During startup the new thread may examine PD in coordination with the ++ owner thread (which may be itself). ++ ++ The four cases of ownership transfer are: ++ ++ (1) Ownership of PD is released to the process (all threads may use it) ++ after the new thread starts in a joinable state ++ i.e. pthread_create returns a usable pthread_t. ++ ++ (2) Ownership of PD is released to the new thread starting in a detached ++ state. ++ ++ (3) Ownership of PD is dynamically released to a running thread via ++ pthread_detach. ++ ++ (4) Ownership of PD is acquired by the thread which calls pthread_join. ++ ++ Implementation notes: ++ ++ The PD->stopped_start and thread_ran variables are used to determine ++ exactly which of the four ownership states we are in and therefore ++ what actions can be taken. For example after (2) we cannot read or ++ write from PD anymore since the thread may no longer exist and the ++ memory may be unmapped. The most complicated cases happen during ++ thread startup: ++ ++ (a) If the created thread is in a detached (PTHREAD_CREATE_DETACHED), ++ or joinable (default PTHREAD_CREATE_JOINABLE) state and ++ STOPPED_START is true, then the creating thread has ownership of ++ PD until the PD->lock is released by pthread_create. If any ++ errors occur we are in states (c), (d), or (e) below. ++ ++ (b) If the created thread is in a detached state ++ (PTHREAD_CREATED_DETACHED), and STOPPED_START is false, then the ++ creating thread has ownership of PD until it invokes the OS ++ kernel's thread creation routine. If this routine returns ++ without error, then the created thread owns PD; otherwise, see ++ (c) and (e) below. ++ ++ (c) If the detached thread setup failed and THREAD_RAN is true, then ++ the creating thread releases ownership to the new thread by ++ sending a cancellation signal. All threads set THREAD_RAN to ++ true as quickly as possible after returning from the OS kernel's ++ thread creation routine. ++ ++ (d) If the joinable thread setup failed and THREAD_RAN is true, then ++ then the creating thread retains ownership of PD and must cleanup ++ state. Ownership cannot be released to the process via the ++ return of pthread_create since a non-zero result entails PD is ++ undefined and therefore cannot be joined to free the resources. ++ We privately call pthread_join on the thread to finish handling ++ the resource shutdown (Or at least we should, see bug 19511). ++ ++ (e) If the thread creation failed and THREAD_RAN is false, then the ++ creating thread retains ownership of PD and must cleanup state. ++ No waiting for the new thread is required because it never ++ started. ++ ++ The nptl_db interface: ++ ++ The interface with nptl_db requires that we enqueue PD into a linked ++ list and then call a function which the debugger will trap. The PD ++ will then be dequeued and control returned to the thread. The caller ++ at the time must have ownership of PD and such ownership remains ++ after control returns to thread. The enqueued PD is removed from the ++ linked list by the nptl_db callback td_thr_event_getmsg. The debugger ++ must ensure that the thread does not resume execution, otherwise ++ ownership of PD may be lost and examining PD will not be possible. ++ ++ Note that the GNU Debugger as of (December 10th 2015) commit ++ c2c2a31fdb228d41ce3db62b268efea04bd39c18 no longer uses ++ td_thr_event_getmsg and several other related nptl_db interfaces. The ++ principal reason for this is that nptl_db does not support non-stop ++ mode where other threads can run concurrently and modify runtime ++ structures currently in use by the debugger and the nptl_db ++ interface. ++ ++ Axioms: ++ ++ * The create_thread function can never set stopped_start to false. ++ * The created thread can read stopped_start but never write to it. ++ * The variable thread_ran is set some time after the OS thread ++ creation routine returns, how much time after the thread is created ++ is unspecified, but it should be as quickly as possible. ++ ++*/ ++ ++/* CREATE THREAD NOTES: ++ ++ createthread.c defines the create_thread function, and two macros: + START_THREAD_DEFN and START_THREAD_SELF (see below). + +- create_thread is obliged to initialize PD->stopped_start. It +- should be true if the STOPPED_START parameter is true, or if +- create_thread needs the new thread to synchronize at startup for +- some other implementation reason. If PD->stopped_start will be +- true, then create_thread is obliged to perform the operation +- "lll_lock (PD->lock, LLL_PRIVATE)" before starting the thread. ++ create_thread must initialize PD->stopped_start. It should be true ++ if the STOPPED_START parameter is true, or if create_thread needs the ++ new thread to synchronize at startup for some other implementation ++ reason. If STOPPED_START will be true, then create_thread is obliged ++ to lock PD->lock before starting the thread. Then pthread_create ++ unlocks PD->lock which synchronizes-with START_THREAD_DEFN in the ++ child thread which does an acquire/release of PD->lock as the last ++ action before calling the user entry point. The goal of all of this ++ is to ensure that the required initial thread attributes are applied ++ (by the creating thread) before the new thread runs user code. Note ++ that the the functions pthread_getschedparam, pthread_setschedparam, ++ pthread_setschedprio, __pthread_tpp_change_priority, and ++ __pthread_current_priority reuse the same lock, PD->lock, for a ++ similar purpose e.g. synchronizing the setting of similar thread ++ attributes. These functions are never called before the thread is ++ created, so don't participate in startup syncronization, but given ++ that the lock is present already and in the unlocked state, reusing ++ it saves space. + + The return value is zero for success or an errno code for failure. + If the return value is ENOMEM, that will be translated to EAGAIN, + so create_thread need not do that. On failure, *THREAD_RAN should + be set to true iff the thread actually started up and then got +- cancelled before calling user code (*PD->start_routine), in which +- case it is responsible for doing its own cleanup. */ +- ++ canceled before calling user code (*PD->start_routine). */ + static int create_thread (struct pthread *pd, const struct pthread_attr *attr, +- bool stopped_start, STACK_VARIABLES_PARMS, ++ bool *stopped_start, STACK_VARIABLES_PARMS, + bool *thread_ran); + + #include <createthread.c> +@@ -314,12 +430,19 @@ START_THREAD_DEFN + /* Store the new cleanup handler info. */ + THREAD_SETMEM (pd, cleanup_jmp_buf, &unwind_buf); + ++ /* We are either in (a) or (b), and in either case we either own ++ PD already (2) or are about to own PD (1), and so our only ++ restriction would be that we can't free PD until we know we ++ have ownership (see CONCURRENCY NOTES above). */ + if (__glibc_unlikely (pd->stopped_start)) + { + int oldtype = CANCEL_ASYNC (); + + /* Get the lock the parent locked to force synchronization. */ + lll_lock (pd->lock, LLL_PRIVATE); ++ ++ /* We have ownership of PD now. */ ++ + /* And give it up right away. */ + lll_unlock (pd->lock, LLL_PRIVATE); + +@@ -378,7 +501,8 @@ START_THREAD_DEFN + pd, pd->nextevent)); + } + +- /* Now call the function to signal the event. */ ++ /* Now call the function which signals the event. See ++ CONCURRENCY NOTES for the nptl_db interface comments. */ + __nptl_death_event (); + } + } +@@ -642,19 +766,28 @@ __pthread_create_2_1 (pthread_t *newthread, const pthread_attr_t *attr, + that cares whether the thread count is correct. */ + atomic_increment (&__nptl_nthreads); + +- bool thread_ran = false; ++ /* Our local value of stopped_start and thread_ran can be accessed at ++ any time. The PD->stopped_start may only be accessed if we have ++ ownership of PD (see CONCURRENCY NOTES above). */ ++ bool stopped_start = false; bool thread_ran = false; + + /* Start the thread. */ + if (__glibc_unlikely (report_thread_creation (pd))) + { +- /* Create the thread. We always create the thread stopped +- so that it does not get far before we tell the debugger. */ +- retval = create_thread (pd, iattr, true, STACK_VARIABLES_ARGS, +- &thread_ran); ++ stopped_start = true; ++ ++ /* We always create the thread stopped at startup so we can ++ notify the debugger. */ ++ retval = create_thread (pd, iattr, &stopped_start, ++ STACK_VARIABLES_ARGS, &thread_ran); + if (retval == 0) + { +- /* create_thread should have set this so that the logic below can +- test it. */ ++ /* We retain ownership of PD until (a) (see CONCURRENCY NOTES ++ above). */ ++ ++ /* Assert stopped_start is true in both our local copy and the ++ PD copy. */ ++ assert (stopped_start); + assert (pd->stopped_start); + + /* Now fill in the information about the new thread in +@@ -671,26 +804,30 @@ __pthread_create_2_1 (pthread_t *newthread, const pthread_attr_t *attr, + pd, pd->nextevent) + != 0); + +- /* Now call the function which signals the event. */ ++ /* Now call the function which signals the event. See ++ CONCURRENCY NOTES for the nptl_db interface comments. */ + __nptl_create_event (); + } + } + else +- retval = create_thread (pd, iattr, false, STACK_VARIABLES_ARGS, +- &thread_ran); ++ retval = create_thread (pd, iattr, &stopped_start, ++ STACK_VARIABLES_ARGS, &thread_ran); + + if (__glibc_unlikely (retval != 0)) + { +- /* If thread creation "failed", that might mean that the thread got +- created and ran a little--short of running user code--but then +- create_thread cancelled it. In that case, the thread will do all +- its own cleanup just like a normal thread exit after a successful +- creation would do. */ +- + if (thread_ran) +- assert (pd->stopped_start); ++ /* State (c) or (d) and we may not have PD ownership (see ++ CONCURRENCY NOTES above). We can assert that STOPPED_START ++ must have been true because thread creation didn't fail, but ++ thread attribute setting did. */ ++ /* See bug 19511 which explains why doing nothing here is a ++ resource leak for a joinable thread. */ ++ assert (stopped_start); + else + { ++ /* State (e) and we have ownership of PD (see CONCURRENCY ++ NOTES above). */ ++ + /* Oops, we lied for a second. */ + atomic_decrement (&__nptl_nthreads); + +@@ -710,10 +847,14 @@ __pthread_create_2_1 (pthread_t *newthread, const pthread_attr_t *attr, + } + else + { +- if (pd->stopped_start) +- /* The thread blocked on this lock either because we're doing TD_CREATE +- event reporting, or for some other reason that create_thread chose. +- Now let it run free. */ ++ /* We don't know if we have PD ownership. Once we check the local ++ stopped_start we'll know if we're in state (a) or (b) (see ++ CONCURRENCY NOTES above). */ ++ if (stopped_start) ++ /* State (a), we own PD. The thread blocked on this lock either ++ because we're doing TD_CREATE event reporting, or for some ++ other reason that create_thread chose. Now let it run ++ free. */ + lll_unlock (pd->lock, LLL_PRIVATE); + + /* We now have for sure more than one thread. The main thread might +diff --git a/nptl/pthread_getschedparam.c b/nptl/pthread_getschedparam.c +index b887881baf..de71171a08 100644 +--- a/nptl/pthread_getschedparam.c ++++ b/nptl/pthread_getschedparam.c +@@ -35,6 +35,7 @@ __pthread_getschedparam (pthread_t threadid, int *policy, + + int result = 0; + ++ /* See CREATE THREAD NOTES in nptl/pthread_create.c. */ + lll_lock (pd->lock, LLL_PRIVATE); + + /* The library is responsible for maintaining the values at all +diff --git a/nptl/pthread_setschedparam.c b/nptl/pthread_setschedparam.c +index dfb52b9dbf..dcb520f1c8 100644 +--- a/nptl/pthread_setschedparam.c ++++ b/nptl/pthread_setschedparam.c +@@ -36,6 +36,7 @@ __pthread_setschedparam (pthread_t threadid, int policy, + + int result = 0; + ++ /* See CREATE THREAD NOTES in nptl/pthread_create.c. */ + lll_lock (pd->lock, LLL_PRIVATE); + + struct sched_param p; +diff --git a/nptl/pthread_setschedprio.c b/nptl/pthread_setschedprio.c +index cefc6481d6..8134b50560 100644 +--- a/nptl/pthread_setschedprio.c ++++ b/nptl/pthread_setschedprio.c +@@ -38,6 +38,7 @@ pthread_setschedprio (pthread_t threadid, int prio) + struct sched_param param; + param.sched_priority = prio; + ++ /* See CREATE THREAD NOTES in nptl/pthread_create.c. */ + lll_lock (pd->lock, LLL_PRIVATE); + + /* If the thread should have higher priority because of some +diff --git a/nptl/tpp.c b/nptl/tpp.c +index e175bf4d53..223bd6bbee 100644 +--- a/nptl/tpp.c ++++ b/nptl/tpp.c +@@ -114,6 +114,7 @@ __pthread_tpp_change_priority (int previous_prio, int new_prio) + if (priomax == newpriomax) + return 0; + ++ /* See CREATE THREAD NOTES in nptl/pthread_create.c. */ + lll_lock (self->lock, LLL_PRIVATE); + + tpp->priomax = newpriomax; +@@ -165,6 +166,7 @@ __pthread_current_priority (void) + + int result = 0; + ++ /* See CREATE THREAD NOTES in nptl/pthread_create.c. */ + lll_lock (self->lock, LLL_PRIVATE); + + if ((self->flags & ATTR_FLAG_SCHED_SET) == 0) +diff --git a/nptl/tst-create-detached.c b/nptl/tst-create-detached.c +new file mode 100644 +index 0000000000..ea93e441c7 +--- /dev/null ++++ b/nptl/tst-create-detached.c +@@ -0,0 +1,137 @@ ++/* Bug 20116: Test rapid creation of detached threads. ++ Copyright (C) 2017 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; see the file COPYING.LIB. If ++ not, see <http://www.gnu.org/licenses/>. */ ++ ++/* The goal of the test is to trigger a failure if the parent touches ++ any part of the thread descriptor after the detached thread has ++ exited. We test this by creating many detached threads with large ++ stacks. The stacks quickly fill the the stack cache and subsequent ++ threads will start to cause the thread stacks to be immediately ++ unmapped to satisfy the stack cache max. With the stacks being ++ unmapped the parent's read of any part of the thread descriptor will ++ trigger a segfault. That segfault is what we are trying to cause, ++ since any segfault is a defect in the implementation. */ ++ ++#include <pthread.h> ++#include <stdio.h> ++#include <errno.h> ++#include <unistd.h> ++#include <stdbool.h> ++#include <sys/resource.h> ++#include <support/xthread.h> ++ ++/* Number of threads to create. */ ++enum { threads_to_create = 100000 }; ++ ++/* Number of threads which should spawn other threads. */ ++enum { creator_threads = 2 }; ++ ++/* Counter of threads created so far. This is incremented by all the ++ running creator threads. */ ++static unsigned threads_created; ++ ++/* Thread callback which does nothing, so that the thread exits ++ immediatedly. */ ++static void * ++do_nothing (void *arg) ++{ ++ return NULL; ++} ++ ++/* Attribute indicating that the thread should be created in a detached ++ fashion. */ ++static pthread_attr_t detached; ++ ++/* Barrier to synchronize initialization. */ ++static pthread_barrier_t barrier; ++ ++static void * ++creator_thread (void *arg) ++{ ++ int ret; ++ xpthread_barrier_wait (&barrier); ++ ++ while (true) ++ { ++ pthread_t thr; ++ /* Thread creation will fail if the kernel does not free old ++ threads quickly enough, so we do not report errors. */ ++ ret = pthread_create (&thr, &detached, do_nothing, NULL); ++ if (ret == 0 && __atomic_add_fetch (&threads_created, 1, __ATOMIC_SEQ_CST) ++ >= threads_to_create) ++ break; ++ } ++ ++ return NULL; ++} ++ ++static int ++do_test (void) ++{ ++ /* Limit the size of the process, so that memory allocation will ++ fail without impacting the entire system. */ ++ { ++ struct rlimit limit; ++ if (getrlimit (RLIMIT_AS, &limit) != 0) ++ { ++ printf ("FAIL: getrlimit (RLIMIT_AS) failed: %m\n"); ++ return 1; ++ } ++ /* This limit, 800MB, is just a heuristic. Any value can be ++ picked. */ ++ long target = 800 * 1024 * 1024; ++ if (limit.rlim_cur == RLIM_INFINITY || limit.rlim_cur > target) ++ { ++ limit.rlim_cur = target; ++ if (setrlimit (RLIMIT_AS, &limit) != 0) ++ { ++ printf ("FAIL: setrlimit (RLIMIT_AS) failed: %m\n"); ++ return 1; ++ } ++ } ++ } ++ ++ xpthread_attr_init (&detached); ++ ++ xpthread_attr_setdetachstate (&detached, PTHREAD_CREATE_DETACHED); ++ ++ /* A large thread stack seems beneficial for reproducing a race ++ condition in detached thread creation. The goal is to reach the ++ limit of the runtime thread stack cache such that the detached ++ thread's stack is unmapped after exit and causes a segfault when ++ the parent reads the thread descriptor data stored on the the ++ unmapped stack. */ ++ xpthread_attr_setstacksize (&detached, 16 * 1024 * 1024); ++ ++ xpthread_barrier_init (&barrier, NULL, creator_threads); ++ ++ pthread_t threads[creator_threads]; ++ ++ for (int i = 0; i < creator_threads; ++i) ++ threads[i] = xpthread_create (NULL, creator_thread, NULL); ++ ++ for (int i = 0; i < creator_threads; ++i) ++ xpthread_join (threads[i]); ++ ++ xpthread_attr_destroy (&detached); ++ ++ xpthread_barrier_destroy (&barrier); ++ ++ return 0; ++} ++ ++#include <support/test-driver.c> +diff --git a/sysdeps/nacl/createthread.c b/sysdeps/nacl/createthread.c +index 7b571c34e2..5465558cc1 100644 +--- a/sysdeps/nacl/createthread.c ++++ b/sysdeps/nacl/createthread.c +@@ -32,15 +32,13 @@ static void start_thread (void) __attribute__ ((noreturn)); + + static int + create_thread (struct pthread *pd, const struct pthread_attr *attr, +- bool stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran) ++ bool *stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran) + { + pd->tid = __nacl_get_tid (pd); + +- pd->stopped_start = stopped_start; +- if (__glibc_unlikely (stopped_start)) +- /* We make sure the thread does not run far by forcing it to get a +- lock. We lock it here too so that the new thread cannot continue +- until we tell it to. */ ++ pd->stopped_start = *stopped_start; ++ if (__glibc_unlikely (*stopped_start)) ++ /* See CONCURRENCY NOTES in nptl/pthread_create.c. */ + lll_lock (pd->lock, LLL_PRIVATE); + + TLS_DEFINE_INIT_TP (tp, pd); +diff --git a/sysdeps/unix/sysv/linux/createthread.c b/sysdeps/unix/sysv/linux/createthread.c +index 6d32cece48..66ddae61d4 100644 +--- a/sysdeps/unix/sysv/linux/createthread.c ++++ b/sysdeps/unix/sysv/linux/createthread.c +@@ -46,7 +46,7 @@ static int start_thread (void *arg) __attribute__ ((noreturn)); + + static int + create_thread (struct pthread *pd, const struct pthread_attr *attr, +- bool stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran) ++ bool *stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran) + { + /* Determine whether the newly created threads has to be started + stopped since we have to set the scheduling parameters or set the +@@ -54,13 +54,11 @@ create_thread (struct pthread *pd, const struct pthread_attr *attr, + if (attr != NULL + && (__glibc_unlikely (attr->cpuset != NULL) + || __glibc_unlikely ((attr->flags & ATTR_FLAG_NOTINHERITSCHED) != 0))) +- stopped_start = true; ++ *stopped_start = true; + +- pd->stopped_start = stopped_start; +- if (__glibc_unlikely (stopped_start)) +- /* We make sure the thread does not run far by forcing it to get a +- lock. We lock it here too so that the new thread cannot continue +- until we tell it to. */ ++ pd->stopped_start = *stopped_start; ++ if (__glibc_unlikely (*stopped_start)) ++ /* See CONCURRENCY NOTES in nptl/pthread_creat.c. */ + lll_lock (pd->lock, LLL_PRIVATE); + + /* We rely heavily on various flags the CLONE function understands: +@@ -117,7 +115,7 @@ create_thread (struct pthread *pd, const struct pthread_attr *attr, + /* Set the affinity mask if necessary. */ + if (attr->cpuset != NULL) + { +- assert (stopped_start); ++ assert (*stopped_start); + + res = INTERNAL_SYSCALL (sched_setaffinity, err, 3, pd->tid, + attr->cpusetsize, attr->cpuset); +@@ -140,7 +138,7 @@ create_thread (struct pthread *pd, const struct pthread_attr *attr, + /* Set the scheduling parameters. */ + if ((attr->flags & ATTR_FLAG_NOTINHERITSCHED) != 0) + { +- assert (stopped_start); ++ assert (*stopped_start); + + res = INTERNAL_SYSCALL (sched_setscheduler, err, 3, pd->tid, + pd->schedpolicy, &pd->schedparam); +-- +2.11.0 + diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/CVE-2016-6323.patch b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/CVE-2016-6323.patch new file mode 100644 index 000000000..f9b9fa50d --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc/CVE-2016-6323.patch @@ -0,0 +1,39 @@ +glibc-2.24: Fix CVE-2016-6323 + +[No upstream tracking] -- https://sourceware.org/bugzilla/show_bug.cgi?id=20435 + +arm: mark __startcontext as .cantunwind, GNU + +Glibc bug where the makecontext function would create +an execution context which is incompatible with the unwinder, +causing it to hang when the generation of a backtrace is attempted. + +Upstream-Status: Backport [https://sourceware.org/git/gitweb.cgi?p=glibc.git;h=9e2ff6c9cc54c0b4402b8d49e4abe7000fde7617] +CVE: CVE-2016-6323 +Signed-off-by: Andrej Valek <andrej.valek@siemens.com> +Signed-off-by: Pascal Bach <pascal.bach@siemens.com> + +diff --git a/sysdeps/unix/sysv/linux/arm/setcontext.S b/sysdeps/unix/sysv/linux/arm/setcontext.S +index 603e508..d1f168f 100644 +--- a/sysdeps/unix/sysv/linux/arm/setcontext.S ++++ b/sysdeps/unix/sysv/linux/arm/setcontext.S +@@ -86,12 +86,19 @@ weak_alias(__setcontext, setcontext) + + /* Called when a makecontext() context returns. Start the + context in R4 or fall through to exit(). */ ++ /* Unwind descriptors are looked up based on PC - 2, so we have to ++ make sure to mark the instruction preceding the __startcontext ++ label as .cantunwind. */ ++ .fnstart ++ .cantunwind ++ nop + ENTRY(__startcontext) + movs r0, r4 + bne PLTJMP(__setcontext) + + @ New context was 0 - exit + b PLTJMP(HIDDEN_JUMPTARGET(exit)) ++ .fnend + END(__startcontext) + + #ifdef PIC diff --git a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc_2.24.bb b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc_2.24.bb index f5a21b258..e723e03dc 100644 --- a/import-layers/yocto-poky/meta/recipes-core/glibc/glibc_2.24.bb +++ b/import-layers/yocto-poky/meta/recipes-core/glibc/glibc_2.24.bb @@ -37,6 +37,14 @@ SRC_URI = "${GLIBC_GIT_URI};branch=${SRCBRANCH};name=glibc \ file://0024-eglibc-Forward-port-cross-locale-generation-support.patch \ file://0025-Define-DUMMY_LOCALE_T-if-not-defined.patch \ file://0026-build_local_scope.patch \ + file://0028-Bug-20116-Fix-use-after-free-in-pthread_create.patch \ + file://CVE-2016-6323.patch \ + file://0001-Add-atomic_exchange_relaxed.patch \ + file://0002-Add-atomic-operations-required-by-the-new-condition-.patch \ + file://0003-Add-pretty-printers-for-the-NPTL-lock-types.patch \ + file://0004-New-condvar-implementation-that-provides-stronger-or.patch \ + file://0005-Remove-__ASSUME_REQUEUE_PI.patch \ + file://0006-Fix-atomic_fetch_xor_release.patch \ " SRC_URI += "\ diff --git a/import-layers/yocto-poky/meta/recipes-core/images/build-appliance-image_15.0.0.bb b/import-layers/yocto-poky/meta/recipes-core/images/build-appliance-image_15.0.0.bb index e6ed0f482..0803ddb65 100644 --- a/import-layers/yocto-poky/meta/recipes-core/images/build-appliance-image_15.0.0.bb +++ b/import-layers/yocto-poky/meta/recipes-core/images/build-appliance-image_15.0.0.bb @@ -22,7 +22,7 @@ IMAGE_FSTYPES = "vmdk" inherit core-image module-base -SRCREV ?= "746c681be4c744d0c6c2d3225b94550241546f65" +SRCREV ?= "e92165f5cea1c345672dd866df6a44d1cd8b97ce" SRC_URI = "git://git.yoctoproject.org/poky;branch=morty \ file://Yocto_Build_Appliance.vmx \ file://Yocto_Build_Appliance.vmxf \ @@ -63,7 +63,7 @@ fakeroot do_populate_poky_src () { # Also save (for reference only) the actual SRCREV used to create this image echo "export BA_SRCREV=${SRCREV}" >> ${IMAGE_ROOTFS}/home/builder/.bashrc echo "" >> ${IMAGE_ROOTFS}/home/builder/.bashrc - echo "export PATH=$PATH:/sbin" >> ${IMAGE_ROOTFS}/home/builder/.bashrc + echo 'export PATH=$PATH:/sbin' >> ${IMAGE_ROOTFS}/home/builder/.bashrc echo "" >> ${IMAGE_ROOTFS}/home/builder/.bashrc echo "# If working behind a proxy and using the provided oe-git-proxy script" >> ${IMAGE_ROOTFS}/home/builder/.bashrc diff --git a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/CVE-2016-9318.patch b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/CVE-2016-9318.patch new file mode 100644 index 000000000..3581ab83d --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/CVE-2016-9318.patch @@ -0,0 +1,207 @@ +From 7fa1cd31552d52d50a9101f07c816ff6dd2d9f19 Mon Sep 17 00:00:00 2001 +From: Doran Moppert <dmoppert@redhat.com> +Date: Fri, 7 Apr 2017 16:45:56 +0200 +Subject: [PATCH] Add an XML_PARSE_NOXXE flag to block all entities loading + even local + +For https://bugzilla.gnome.org/show_bug.cgi?id=772726 + +* include/libxml/parser.h: Add a new parser flag XML_PARSE_NOXXE +* elfgcchack.h, xmlIO.h, xmlIO.c: associated loading routine +* include/libxml/xmlerror.h: new error raised +* xmllint.c: adds --noxxe flag to activate the option + +Upstream-Status: Backport +CVE: CVE-2016-9318 + +Signed-off-by: Catalin Enache <catalin.enache@windriver.com> +--- + elfgcchack.h | 10 ++++++++++ + include/libxml/parser.h | 3 ++- + include/libxml/xmlIO.h | 8 ++++++++ + include/libxml/xmlerror.h | 1 + + parser.c | 4 ++++ + xmlIO.c | 40 +++++++++++++++++++++++++++++++++++----- + xmllint.c | 5 +++++ + 7 files changed, 65 insertions(+), 6 deletions(-) + +diff --git a/elfgcchack.h b/elfgcchack.h +index 8c52884..1b81dcd 100644 +--- a/elfgcchack.h ++++ b/elfgcchack.h +@@ -6547,6 +6547,16 @@ extern __typeof (xmlNoNetExternalEntityLoader) xmlNoNetExternalEntityLoader__int + #endif + #endif + ++#ifdef bottom_xmlIO ++#undef xmlNoXxeExternalEntityLoader ++extern __typeof (xmlNoXxeExternalEntityLoader) xmlNoXxeExternalEntityLoader __attribute((alias("xmlNoXxeExternalEntityLoader__internal_alias"))); ++#else ++#ifndef xmlNoXxeExternalEntityLoader ++extern __typeof (xmlNoXxeExternalEntityLoader) xmlNoXxeExternalEntityLoader__internal_alias __attribute((visibility("hidden"))); ++#define xmlNoXxeExternalEntityLoader xmlNoXxeExternalEntityLoader__internal_alias ++#endif ++#endif ++ + #ifdef bottom_tree + #undef xmlNodeAddContent + extern __typeof (xmlNodeAddContent) xmlNodeAddContent __attribute((alias("xmlNodeAddContent__internal_alias"))); +diff --git a/include/libxml/parser.h b/include/libxml/parser.h +index 47fbec0..63ca1b9 100644 +--- a/include/libxml/parser.h ++++ b/include/libxml/parser.h +@@ -1111,7 +1111,8 @@ typedef enum { + XML_PARSE_HUGE = 1<<19,/* relax any hardcoded limit from the parser */ + XML_PARSE_OLDSAX = 1<<20,/* parse using SAX2 interface before 2.7.0 */ + XML_PARSE_IGNORE_ENC= 1<<21,/* ignore internal document encoding hint */ +- XML_PARSE_BIG_LINES = 1<<22 /* Store big lines numbers in text PSVI field */ ++ XML_PARSE_BIG_LINES = 1<<22,/* Store big lines numbers in text PSVI field */ ++ XML_PARSE_NOXXE = 1<<23 /* Forbid any external entity loading */ + } xmlParserOption; + + XMLPUBFUN void XMLCALL +diff --git a/include/libxml/xmlIO.h b/include/libxml/xmlIO.h +index 3e41744..8d3fdef 100644 +--- a/include/libxml/xmlIO.h ++++ b/include/libxml/xmlIO.h +@@ -300,6 +300,14 @@ XMLPUBFUN xmlParserInputPtr XMLCALL + xmlParserCtxtPtr ctxt); + + /* ++ * A predefined entity loader external entity expansion ++ */ ++XMLPUBFUN xmlParserInputPtr XMLCALL ++ xmlNoXxeExternalEntityLoader (const char *URL, ++ const char *ID, ++ xmlParserCtxtPtr ctxt); ++ ++/* + * xmlNormalizeWindowsPath is obsolete, don't use it. + * Check xmlCanonicPath in uri.h for a better alternative. + */ +diff --git a/include/libxml/xmlerror.h b/include/libxml/xmlerror.h +index 037c16d..3036062 100644 +--- a/include/libxml/xmlerror.h ++++ b/include/libxml/xmlerror.h +@@ -470,6 +470,7 @@ typedef enum { + XML_IO_EADDRINUSE, /* 1554 */ + XML_IO_EALREADY, /* 1555 */ + XML_IO_EAFNOSUPPORT, /* 1556 */ ++ XML_IO_ILLEGAL_XXE, /* 1557 */ + XML_XINCLUDE_RECURSION=1600, + XML_XINCLUDE_PARSE_VALUE, /* 1601 */ + XML_XINCLUDE_ENTITY_DEF_MISMATCH, /* 1602 */ +diff --git a/parser.c b/parser.c +index 53a6b7f..609a270 100644 +--- a/parser.c ++++ b/parser.c +@@ -15350,6 +15350,10 @@ xmlCtxtUseOptionsInternal(xmlParserCtxtPtr ctxt, int options, const char *encodi + ctxt->options |= XML_PARSE_NONET; + options -= XML_PARSE_NONET; + } ++ if (options & XML_PARSE_NOXXE) { ++ ctxt->options |= XML_PARSE_NOXXE; ++ options -= XML_PARSE_NOXXE; ++ } + if (options & XML_PARSE_COMPACT) { + ctxt->options |= XML_PARSE_COMPACT; + options -= XML_PARSE_COMPACT; +diff --git a/xmlIO.c b/xmlIO.c +index 1a79c09..304f822 100644 +--- a/xmlIO.c ++++ b/xmlIO.c +@@ -210,6 +210,7 @@ static const char *IOerr[] = { + "adddress in use", /* EADDRINUSE */ + "already in use", /* EALREADY */ + "unknown address familly", /* EAFNOSUPPORT */ ++ "Attempt to load external entity %s", /* XML_IO_ILLEGAL_XXE */ + }; + + #if defined(_WIN32) || defined (__DJGPP__) && !defined (__CYGWIN__) +@@ -4053,13 +4054,22 @@ xmlDefaultExternalEntityLoader(const char *URL, const char *ID, + xmlGenericError(xmlGenericErrorContext, + "xmlDefaultExternalEntityLoader(%s, xxx)\n", URL); + #endif +- if ((ctxt != NULL) && (ctxt->options & XML_PARSE_NONET)) { ++ if (ctxt != NULL) { + int options = ctxt->options; + +- ctxt->options -= XML_PARSE_NONET; +- ret = xmlNoNetExternalEntityLoader(URL, ID, ctxt); +- ctxt->options = options; +- return(ret); ++ if (options & XML_PARSE_NOXXE) { ++ ctxt->options -= XML_PARSE_NOXXE; ++ ret = xmlNoXxeExternalEntityLoader(URL, ID, ctxt); ++ ctxt->options = options; ++ return(ret); ++ } ++ ++ if (options & XML_PARSE_NONET) { ++ ctxt->options -= XML_PARSE_NONET; ++ ret = xmlNoNetExternalEntityLoader(URL, ID, ctxt); ++ ctxt->options = options; ++ return(ret); ++ } + } + #ifdef LIBXML_CATALOG_ENABLED + resource = xmlResolveResourceFromCatalog(URL, ID, ctxt); +@@ -4160,6 +4170,13 @@ xmlNoNetExternalEntityLoader(const char *URL, const char *ID, + xmlParserInputPtr input = NULL; + xmlChar *resource = NULL; + ++ if (ctxt == NULL) { ++ return(NULL); ++ } ++ if (ctxt->input_id == 1) { ++ return xmlDefaultExternalEntityLoader((const char *) URL, ID, ctxt); ++ } ++ + #ifdef LIBXML_CATALOG_ENABLED + resource = xmlResolveResourceFromCatalog(URL, ID, ctxt); + #endif +@@ -4182,5 +4199,18 @@ xmlNoNetExternalEntityLoader(const char *URL, const char *ID, + return(input); + } + ++xmlParserInputPtr ++xmlNoXxeExternalEntityLoader(const char *URL, const char *ID, ++ xmlParserCtxtPtr ctxt) { ++ if (ctxt == NULL) { ++ return(NULL); ++ } ++ if (ctxt->input_id == 1) { ++ return xmlDefaultExternalEntityLoader((const char *) URL, ID, ctxt); ++ } ++ xmlIOErr(XML_IO_ILLEGAL_XXE, (const char *) URL); ++ return(NULL); ++} ++ + #define bottom_xmlIO + #include "elfgcchack.h" +diff --git a/xmllint.c b/xmllint.c +index 67f7adb..d9368c1 100644 +--- a/xmllint.c ++++ b/xmllint.c +@@ -3019,6 +3019,7 @@ static void usage(const char *name) { + printf("\t--path 'paths': provide a set of paths for resources\n"); + printf("\t--load-trace : print trace of all external entities loaded\n"); + printf("\t--nonet : refuse to fetch DTDs or entities over network\n"); ++ printf("\t--noxxe : forbid any external entity loading\n"); + printf("\t--nocompact : do not generate compact text nodes\n"); + printf("\t--htmlout : output results as HTML\n"); + printf("\t--nowrap : do not put HTML doc wrapper\n"); +@@ -3461,6 +3462,10 @@ main(int argc, char **argv) { + (!strcmp(argv[i], "--nonet"))) { + options |= XML_PARSE_NONET; + xmlSetExternalEntityLoader(xmlNoNetExternalEntityLoader); ++ } else if ((!strcmp(argv[i], "-noxxe")) || ++ (!strcmp(argv[i], "--noxxe"))) { ++ options |= XML_PARSE_NOXXE; ++ xmlSetExternalEntityLoader(xmlNoXxeExternalEntityLoader); + } else if ((!strcmp(argv[i], "-nocompact")) || + (!strcmp(argv[i], "--nocompact"))) { + options &= ~XML_PARSE_COMPACT; +-- +2.10.2 + diff --git a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-CVE-2016-4658.patch b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-CVE-2016-4658.patch new file mode 100644 index 000000000..5412e8c02 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-CVE-2016-4658.patch @@ -0,0 +1,269 @@ +libxml2-2.9.4: Fix CVE-2016-4658 + +[No upstream tracking] -- https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2016-4658 + +xpointer: Disallow namespace nodes in XPointer points and ranges + +Namespace nodes must be copied to avoid use-after-free errors. +But they don't necessarily have a physical representation in a +document, so simply disallow them in XPointer ranges. + +Upstream-Status: Backported + - [https://git.gnome.org/browse/libxml2/commit/?id=c1d1f7121194036608bf555f08d3062a36fd344b] + - [https://git.gnome.org/browse/libxml2/commit/?id=3f8a91036d338e51c059d54397a42d645f019c65] +CVE: CVE-2016-4658 +Signed-off-by: Andrej Valek <andrej.valek@siemens.com> +Signed-off-by: Pascal Bach <pascal.bach@siemens.com> + +diff --git a/xpointer.c b/xpointer.c +index 676c510..911680d 100644 +--- a/xpointer.c ++++ b/xpointer.c +@@ -320,6 +320,45 @@ xmlXPtrRangesEqual(xmlXPathObjectPtr range1, xmlXPathObjectPtr range2) { + } + + /** ++ * xmlXPtrNewRangeInternal: ++ * @start: the starting node ++ * @startindex: the start index ++ * @end: the ending point ++ * @endindex: the ending index ++ * ++ * Internal function to create a new xmlXPathObjectPtr of type range ++ * ++ * Returns the newly created object. ++ */ ++static xmlXPathObjectPtr ++xmlXPtrNewRangeInternal(xmlNodePtr start, int startindex, ++ xmlNodePtr end, int endindex) { ++ xmlXPathObjectPtr ret; ++ ++ /* ++ * Namespace nodes must be copied (see xmlXPathNodeSetDupNs). ++ * Disallow them for now. ++ */ ++ if ((start != NULL) && (start->type == XML_NAMESPACE_DECL)) ++ return(NULL); ++ if ((end != NULL) && (end->type == XML_NAMESPACE_DECL)) ++ return(NULL); ++ ++ ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); ++ if (ret == NULL) { ++ xmlXPtrErrMemory("allocating range"); ++ return(NULL); ++ } ++ memset(ret, 0, sizeof(xmlXPathObject)); ++ ret->type = XPATH_RANGE; ++ ret->user = start; ++ ret->index = startindex; ++ ret->user2 = end; ++ ret->index2 = endindex; ++ return(ret); ++} ++ ++/** + * xmlXPtrNewRange: + * @start: the starting node + * @startindex: the start index +@@ -344,17 +383,7 @@ xmlXPtrNewRange(xmlNodePtr start, int startindex, + if (endindex < 0) + return(NULL); + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start; +- ret->index = startindex; +- ret->user2 = end; +- ret->index2 = endindex; ++ ret = xmlXPtrNewRangeInternal(start, startindex, end, endindex); + xmlXPtrRangeCheckOrder(ret); + return(ret); + } +@@ -381,17 +410,8 @@ xmlXPtrNewRangePoints(xmlXPathObjectPtr start, xmlXPathObjectPtr end) { + if (end->type != XPATH_POINT) + return(NULL); + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start->user; +- ret->index = start->index; +- ret->user2 = end->user; +- ret->index2 = end->index; ++ ret = xmlXPtrNewRangeInternal(start->user, start->index, end->user, ++ end->index); + xmlXPtrRangeCheckOrder(ret); + return(ret); + } +@@ -416,17 +436,7 @@ xmlXPtrNewRangePointNode(xmlXPathObjectPtr start, xmlNodePtr end) { + if (start->type != XPATH_POINT) + return(NULL); + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start->user; +- ret->index = start->index; +- ret->user2 = end; +- ret->index2 = -1; ++ ret = xmlXPtrNewRangeInternal(start->user, start->index, end, -1); + xmlXPtrRangeCheckOrder(ret); + return(ret); + } +@@ -453,17 +463,7 @@ xmlXPtrNewRangeNodePoint(xmlNodePtr start, xmlXPathObjectPtr end) { + if (end->type != XPATH_POINT) + return(NULL); + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start; +- ret->index = -1; +- ret->user2 = end->user; +- ret->index2 = end->index; ++ ret = xmlXPtrNewRangeInternal(start, -1, end->user, end->index); + xmlXPtrRangeCheckOrder(ret); + return(ret); + } +@@ -486,17 +486,7 @@ xmlXPtrNewRangeNodes(xmlNodePtr start, xmlNodePtr end) { + if (end == NULL) + return(NULL); + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start; +- ret->index = -1; +- ret->user2 = end; +- ret->index2 = -1; ++ ret = xmlXPtrNewRangeInternal(start, -1, end, -1); + xmlXPtrRangeCheckOrder(ret); + return(ret); + } +@@ -516,17 +506,7 @@ xmlXPtrNewCollapsedRange(xmlNodePtr start) { + if (start == NULL) + return(NULL); + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start; +- ret->index = -1; +- ret->user2 = NULL; +- ret->index2 = -1; ++ ret = xmlXPtrNewRangeInternal(start, -1, NULL, -1); + return(ret); + } + +@@ -541,6 +521,8 @@ xmlXPtrNewCollapsedRange(xmlNodePtr start) { + */ + xmlXPathObjectPtr + xmlXPtrNewRangeNodeObject(xmlNodePtr start, xmlXPathObjectPtr end) { ++ xmlNodePtr endNode; ++ int endIndex; + xmlXPathObjectPtr ret; + + if (start == NULL) +@@ -549,7 +531,12 @@ xmlXPtrNewRangeNodeObject(xmlNodePtr start, xmlXPathObjectPtr end) { + return(NULL); + switch (end->type) { + case XPATH_POINT: ++ endNode = end->user; ++ endIndex = end->index; ++ break; + case XPATH_RANGE: ++ endNode = end->user2; ++ endIndex = end->index2; + break; + case XPATH_NODESET: + /* +@@ -557,39 +544,15 @@ xmlXPtrNewRangeNodeObject(xmlNodePtr start, xmlXPathObjectPtr end) { + */ + if (end->nodesetval->nodeNr <= 0) + return(NULL); ++ endNode = end->nodesetval->nodeTab[end->nodesetval->nodeNr - 1]; ++ endIndex = -1; + break; + default: + /* TODO */ + return(NULL); + } + +- ret = (xmlXPathObjectPtr) xmlMalloc(sizeof(xmlXPathObject)); +- if (ret == NULL) { +- xmlXPtrErrMemory("allocating range"); +- return(NULL); +- } +- memset(ret, 0 , (size_t) sizeof(xmlXPathObject)); +- ret->type = XPATH_RANGE; +- ret->user = start; +- ret->index = -1; +- switch (end->type) { +- case XPATH_POINT: +- ret->user2 = end->user; +- ret->index2 = end->index; +- break; +- case XPATH_RANGE: +- ret->user2 = end->user2; +- ret->index2 = end->index2; +- break; +- case XPATH_NODESET: { +- ret->user2 = end->nodesetval->nodeTab[end->nodesetval->nodeNr - 1]; +- ret->index2 = -1; +- break; +- } +- default: +- STRANGE +- return(NULL); +- } ++ ret = xmlXPtrNewRangeInternal(start, -1, endNode, endIndex); + xmlXPtrRangeCheckOrder(ret); + return(ret); + } +@@ -1835,8 +1798,8 @@ xmlXPtrStartPointFunction(xmlXPathParserContextPtr ctxt, int nargs) { + case XPATH_RANGE: { + xmlNodePtr node = tmp->user; + if (node != NULL) { +- if (node->type == XML_ATTRIBUTE_NODE) { +- /* TODO: Namespace Nodes ??? */ ++ if ((node->type == XML_ATTRIBUTE_NODE) || ++ (node->type == XML_NAMESPACE_DECL)) { + xmlXPathFreeObject(obj); + xmlXPtrFreeLocationSet(newset); + XP_ERROR(XPTR_SYNTAX_ERROR); +@@ -1931,8 +1894,8 @@ xmlXPtrEndPointFunction(xmlXPathParserContextPtr ctxt, int nargs) { + case XPATH_RANGE: { + xmlNodePtr node = tmp->user2; + if (node != NULL) { +- if (node->type == XML_ATTRIBUTE_NODE) { +- /* TODO: Namespace Nodes ??? */ ++ if ((node->type == XML_ATTRIBUTE_NODE) || ++ (node->type == XML_NAMESPACE_DECL)) { + xmlXPathFreeObject(obj); + xmlXPtrFreeLocationSet(newset); + XP_ERROR(XPTR_SYNTAX_ERROR); diff --git a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-CVE-2016-5131.patch b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-CVE-2016-5131.patch new file mode 100644 index 000000000..9d47d023a --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-CVE-2016-5131.patch @@ -0,0 +1,180 @@ +From 9ab01a277d71f54d3143c2cf333c5c2e9aaedd9e Mon Sep 17 00:00:00 2001 +From: Nick Wellnhofer <wellnhofer@aevum.de> +Date: Tue, 28 Jun 2016 14:22:23 +0200 +Subject: [PATCH] Fix XPointer paths beginning with range-to + +The old code would invoke the broken xmlXPtrRangeToFunction. range-to +isn't really a function but a special kind of location step. Remove +this function and always handle range-to in the XPath code. + +The old xmlXPtrRangeToFunction could also be abused to trigger a +use-after-free error with the potential for remote code execution. + +Found with afl-fuzz. + +Fixes CVE-2016-5131. + +CVE: CVE-2016-5131 +Upstream-Status: Backport +https://git.gnome.org/browse/libxml2/commit/?id=9ab01a277d71f54d3143c2cf333c5c2e9aaedd9e + +Signed-off-by: Yi Zhao <yi.zhao@windirver.com> +--- + result/XPath/xptr/vidbase | 13 ++++++++ + test/XPath/xptr/vidbase | 1 + + xpath.c | 7 ++++- + xpointer.c | 76 ++++------------------------------------------- + 4 files changed, 26 insertions(+), 71 deletions(-) + +diff --git a/result/XPath/xptr/vidbase b/result/XPath/xptr/vidbase +index 8b9e92d..f19193e 100644 +--- a/result/XPath/xptr/vidbase ++++ b/result/XPath/xptr/vidbase +@@ -17,3 +17,16 @@ Object is a Location Set: + To node + ELEMENT p + ++ ++======================== ++Expression: xpointer(range-to(id('chapter2'))) ++Object is a Location Set: ++1 : Object is a range : ++ From node ++ / ++ To node ++ ELEMENT chapter ++ ATTRIBUTE id ++ TEXT ++ content=chapter2 ++ +diff --git a/test/XPath/xptr/vidbase b/test/XPath/xptr/vidbase +index b146383..884b106 100644 +--- a/test/XPath/xptr/vidbase ++++ b/test/XPath/xptr/vidbase +@@ -1,2 +1,3 @@ + xpointer(id('chapter1')/p) + xpointer(id('chapter1')/p[1]/range-to(following-sibling::p[2])) ++xpointer(range-to(id('chapter2'))) +diff --git a/xpath.c b/xpath.c +index d992841..5a01b1b 100644 +--- a/xpath.c ++++ b/xpath.c +@@ -10691,13 +10691,18 @@ xmlXPathCompPathExpr(xmlXPathParserContextPtr ctxt) { + lc = 1; + break; + } else if ((NXT(len) == '(')) { +- /* Note Type or Function */ ++ /* Node Type or Function */ + if (xmlXPathIsNodeType(name)) { + #ifdef DEBUG_STEP + xmlGenericError(xmlGenericErrorContext, + "PathExpr: Type search\n"); + #endif + lc = 1; ++#ifdef LIBXML_XPTR_ENABLED ++ } else if (ctxt->xptr && ++ xmlStrEqual(name, BAD_CAST "range-to")) { ++ lc = 1; ++#endif + } else { + #ifdef DEBUG_STEP + xmlGenericError(xmlGenericErrorContext, +diff --git a/xpointer.c b/xpointer.c +index 676c510..d74174a 100644 +--- a/xpointer.c ++++ b/xpointer.c +@@ -1332,8 +1332,6 @@ xmlXPtrNewContext(xmlDocPtr doc, xmlNodePtr here, xmlNodePtr origin) { + ret->here = here; + ret->origin = origin; + +- xmlXPathRegisterFunc(ret, (xmlChar *)"range-to", +- xmlXPtrRangeToFunction); + xmlXPathRegisterFunc(ret, (xmlChar *)"range", + xmlXPtrRangeFunction); + xmlXPathRegisterFunc(ret, (xmlChar *)"range-inside", +@@ -2243,76 +2241,14 @@ xmlXPtrRangeInsideFunction(xmlXPathParserContextPtr ctxt, int nargs) { + * @nargs: the number of args + * + * Implement the range-to() XPointer function ++ * ++ * Obsolete. range-to is not a real function but a special type of location ++ * step which is handled in xpath.c. + */ + void +-xmlXPtrRangeToFunction(xmlXPathParserContextPtr ctxt, int nargs) { +- xmlXPathObjectPtr range; +- const xmlChar *cur; +- xmlXPathObjectPtr res, obj; +- xmlXPathObjectPtr tmp; +- xmlLocationSetPtr newset = NULL; +- xmlNodeSetPtr oldset; +- int i; +- +- if (ctxt == NULL) return; +- CHECK_ARITY(1); +- /* +- * Save the expression pointer since we will have to evaluate +- * it multiple times. Initialize the new set. +- */ +- CHECK_TYPE(XPATH_NODESET); +- obj = valuePop(ctxt); +- oldset = obj->nodesetval; +- ctxt->context->node = NULL; +- +- cur = ctxt->cur; +- newset = xmlXPtrLocationSetCreate(NULL); +- +- for (i = 0; i < oldset->nodeNr; i++) { +- ctxt->cur = cur; +- +- /* +- * Run the evaluation with a node list made of a single item +- * in the nodeset. +- */ +- ctxt->context->node = oldset->nodeTab[i]; +- tmp = xmlXPathNewNodeSet(ctxt->context->node); +- valuePush(ctxt, tmp); +- +- xmlXPathEvalExpr(ctxt); +- CHECK_ERROR; +- +- /* +- * The result of the evaluation need to be tested to +- * decided whether the filter succeeded or not +- */ +- res = valuePop(ctxt); +- range = xmlXPtrNewRangeNodeObject(oldset->nodeTab[i], res); +- if (range != NULL) { +- xmlXPtrLocationSetAdd(newset, range); +- } +- +- /* +- * Cleanup +- */ +- if (res != NULL) +- xmlXPathFreeObject(res); +- if (ctxt->value == tmp) { +- res = valuePop(ctxt); +- xmlXPathFreeObject(res); +- } +- +- ctxt->context->node = NULL; +- } +- +- /* +- * The result is used as the new evaluation set. +- */ +- xmlXPathFreeObject(obj); +- ctxt->context->node = NULL; +- ctxt->context->contextSize = -1; +- ctxt->context->proximityPosition = -1; +- valuePush(ctxt, xmlXPtrWrapLocationSet(newset)); ++xmlXPtrRangeToFunction(xmlXPathParserContextPtr ctxt, ++ int nargs ATTRIBUTE_UNUSED) { ++ XP_ERROR(XPATH_EXPR_ERROR); + } + + /** +-- +2.7.4 + diff --git a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-fix_NULL_pointer_derefs.patch b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-fix_NULL_pointer_derefs.patch new file mode 100644 index 000000000..83552ca3e --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-fix_NULL_pointer_derefs.patch @@ -0,0 +1,46 @@ +libxml2-2.9.4: Fix more NULL pointer derefs + +xpointer: Fix more NULL pointer derefs + +Upstream-Status: Backported [https://git.gnome.org/browse/libxml2/commit/?id=e905f08123e4a6e7731549e6f09dadff4cab65bd] +CVE: - +Signed-off-by: Andrej Valek <andrej.valek@siemens.com> +Signed-off-by: Pascal Bach <pascal.bach@siemens.com> + +diff --git a/xpointer.c b/xpointer.c +index 676c510..074db24 100644 +--- a/xpointer.c ++++ b/xpointer.c +@@ -555,7 +555,7 @@ xmlXPtrNewRangeNodeObject(xmlNodePtr start, xmlXPathObjectPtr end) { + /* + * Empty set ... + */ +- if (end->nodesetval->nodeNr <= 0) ++ if ((end->nodesetval == NULL) || (end->nodesetval->nodeNr <= 0)) + return(NULL); + break; + default: +@@ -1400,7 +1400,7 @@ xmlXPtrEval(const xmlChar *str, xmlXPathContextPtr ctx) { + */ + xmlNodeSetPtr set; + set = tmp->nodesetval; +- if ((set->nodeNr != 1) || ++ if ((set == NULL) || (set->nodeNr != 1) || + (set->nodeTab[0] != (xmlNodePtr) ctx->doc)) + stack++; + } else +@@ -2073,9 +2073,11 @@ xmlXPtrRangeFunction(xmlXPathParserContextPtr ctxt, int nargs) { + xmlXPathFreeObject(set); + XP_ERROR(XPATH_MEMORY_ERROR); + } +- for (i = 0;i < oldset->locNr;i++) { +- xmlXPtrLocationSetAdd(newset, +- xmlXPtrCoveringRange(ctxt, oldset->locTab[i])); ++ if (oldset != NULL) { ++ for (i = 0;i < oldset->locNr;i++) { ++ xmlXPtrLocationSetAdd(newset, ++ xmlXPtrCoveringRange(ctxt, oldset->locTab[i])); ++ } + } + + /* diff --git a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-fix_node_comparison.patch b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-fix_node_comparison.patch new file mode 100644 index 000000000..11718bb2b --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2/libxml2-fix_node_comparison.patch @@ -0,0 +1,67 @@ +libxml2-2.9.4: Fix comparison with root node in xmlXPathCmpNodes and NULL pointer deref in XPointer + +xpath: + - Check for errors after evaluating first operand. + - Add sanity check for empty stack. + - Include comparation in changes from xmlXPathCmpNodesExt to xmlXPathCmpNodes + +Upstream-Status: Backported + - [https://git.gnome.org/browse/libxml2/commit/?id=c1d1f7121194036608bf555f08d3062a36fd344b] + - [https://git.gnome.org/browse/libxml2/commit/?id=a005199330b86dada19d162cae15ef9bdcb6baa8] +CVE: necessary changes for fixing CVE-2016-5131 +Signed-off-by: Andrej Valek <andrej.valek@siemens.com> +Signed-off-by: Pascal Bach <pascal.bach@siemens.com> + +diff --git a/result/XPath/xptr/viderror b/result/XPath/xptr/viderror +new file mode 100644 +index 0000000..d589882 +--- /dev/null ++++ b/result/XPath/xptr/viderror +@@ -0,0 +1,4 @@ ++ ++======================== ++Expression: xpointer(non-existing-fn()/range-to(id('chapter2'))) ++Object is empty (NULL) +diff --git a/test/XPath/xptr/viderror b/test/XPath/xptr/viderror +new file mode 100644 +index 0000000..da8c53b +--- /dev/null ++++ b/test/XPath/xptr/viderror +@@ -0,0 +1 @@ ++xpointer(non-existing-fn()/range-to(id('chapter2'))) +diff --git a/xpath.c b/xpath.c +index 113bce6..d992841 100644 +--- a/xpath.c ++++ b/xpath.c +@@ -3342,13 +3342,13 @@ xmlXPathCmpNodes(xmlNodePtr node1, xmlNodePtr node2) { + * compute depth to root + */ + for (depth2 = 0, cur = node2;cur->parent != NULL;cur = cur->parent) { +- if (cur == node1) ++ if (cur->parent == node1) + return(1); + depth2++; + } + root = cur; + for (depth1 = 0, cur = node1;cur->parent != NULL;cur = cur->parent) { +- if (cur == node2) ++ if (cur->parent == node2) + return(-1); + depth1++; + } +@@ -14005,9 +14005,14 @@ xmlXPathCompOpEval(xmlXPathParserContextPtr ctxt, xmlXPathStepOpPtr op) + xmlNodeSetPtr oldset; + int i, j; + +- if (op->ch1 != -1) ++ if (op->ch1 != -1) { + total += + xmlXPathCompOpEval(ctxt, &comp->steps[op->ch1]); ++ CHECK_ERROR0; ++ } ++ if (ctxt->value == NULL) { ++ XP_ERROR0(XPATH_INVALID_OPERAND); ++ } + if (op->ch2 == -1) + return (total); + diff --git a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2_2.9.4.bb b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2_2.9.4.bb index 59874bec2..c2c3c9326 100644 --- a/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2_2.9.4.bb +++ b/import-layers/yocto-poky/meta/recipes-core/libxml/libxml2_2.9.4.bb @@ -19,6 +19,11 @@ SRC_URI = "ftp://xmlsoft.org/libxml2/libxml2-${PV}.tar.gz;name=libtar \ file://run-ptest \ file://python-sitepackages-dir.patch \ file://libxml-m4-use-pkgconfig.patch \ + file://libxml2-fix_node_comparison.patch \ + file://libxml2-CVE-2016-5131.patch \ + file://libxml2-CVE-2016-4658.patch \ + file://libxml2-fix_NULL_pointer_derefs.patch \ + file://CVE-2016-9318.patch \ " SRC_URI[libtar.md5sum] = "ae249165c173b1ff386ee8ad676815f5" diff --git a/import-layers/yocto-poky/meta/recipes-core/packagegroups/packagegroup-core-standalone-sdk-target.bb b/import-layers/yocto-poky/meta/recipes-core/packagegroups/packagegroup-core-standalone-sdk-target.bb index 274e11a8b..43fc599c7 100644 --- a/import-layers/yocto-poky/meta/recipes-core/packagegroups/packagegroup-core-standalone-sdk-target.bb +++ b/import-layers/yocto-poky/meta/recipes-core/packagegroups/packagegroup-core-standalone-sdk-target.bb @@ -12,3 +12,8 @@ RDEPENDS_${PN} = "\ libstdc++-dev \ ${LIBC_DEPENDENCIES} \ " + +RRECOMMENDS_${PN} = "\ + libssp \ + libssp-dev \ + " diff --git a/import-layers/yocto-poky/meta/recipes-core/systemd/systemd/validate-user.patch b/import-layers/yocto-poky/meta/recipes-core/systemd/systemd/validate-user.patch new file mode 100644 index 000000000..8e0e0c1b9 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-core/systemd/systemd/validate-user.patch @@ -0,0 +1,856 @@ +If a user is created with a strictly-speaking invalid name such as '0day' and a +unit created to run as that user, systemd rejects the username and runs the unit +as root. + +CVE: CVE-2017-1000082 +Upstream-Status: Backport +Signed-off-by: Ross Burton <ross.burton@intel.com> + +From e0c4eb1435d50cb3797cf94100d4886dc2022bce Mon Sep 17 00:00:00 2001 +From: Lennart Poettering <lennart@poettering.net> +Date: Thu, 14 Jul 2016 12:23:39 +0200 +Subject: [PATCH 1/3] sysusers: move various user credential validity checks to + src/basic/ + +This way we can reuse them for validating User=/Group= settings in unit files +(to be added in a later commit). + +Also, add some tests for them. +--- + src/basic/user-util.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++ + src/basic/user-util.h | 5 +++ + src/sysusers/sysusers.c | 75 -------------------------------------- + src/test/test-user-util.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 185 insertions(+), 75 deletions(-) + +diff --git a/src/basic/user-util.c b/src/basic/user-util.c +index f65ca3eda..c85b5c6a8 100644 +--- a/src/basic/user-util.c ++++ b/src/basic/user-util.c +@@ -29,6 +29,7 @@ + #include <string.h> + #include <sys/stat.h> + #include <unistd.h> ++#include <utmp.h> + + #include "missing.h" + #include "alloc-util.h" +@@ -39,6 +40,7 @@ + #include "path-util.h" + #include "string-util.h" + #include "user-util.h" ++#include "utf8.h" + + bool uid_is_valid(uid_t uid) { + +@@ -479,3 +481,94 @@ int take_etc_passwd_lock(const char *root) { + + return fd; + } ++ ++bool valid_user_group_name(const char *u) { ++ const char *i; ++ long sz; ++ ++ /* Checks if the specified name is a valid user/group name. */ ++ ++ if (isempty(u)) ++ return false; ++ ++ if (!(u[0] >= 'a' && u[0] <= 'z') && ++ !(u[0] >= 'A' && u[0] <= 'Z') && ++ u[0] != '_') ++ return false; ++ ++ for (i = u+1; *i; i++) { ++ if (!(*i >= 'a' && *i <= 'z') && ++ !(*i >= 'A' && *i <= 'Z') && ++ !(*i >= '0' && *i <= '9') && ++ *i != '_' && ++ *i != '-') ++ return false; ++ } ++ ++ sz = sysconf(_SC_LOGIN_NAME_MAX); ++ assert_se(sz > 0); ++ ++ if ((size_t) (i-u) > (size_t) sz) ++ return false; ++ ++ if ((size_t) (i-u) > UT_NAMESIZE - 1) ++ return false; ++ ++ return true; ++} ++ ++bool valid_user_group_name_or_id(const char *u) { ++ ++ /* Similar as above, but is also fine with numeric UID/GID specifications, as long as they are in the right ++ * range, and not the invalid user ids. */ ++ ++ if (isempty(u)) ++ return false; ++ ++ if (valid_user_group_name(u)) ++ return true; ++ ++ return parse_uid(u, NULL) >= 0; ++} ++ ++bool valid_gecos(const char *d) { ++ ++ if (!d) ++ return false; ++ ++ if (!utf8_is_valid(d)) ++ return false; ++ ++ if (string_has_cc(d, NULL)) ++ return false; ++ ++ /* Colons are used as field separators, and hence not OK */ ++ if (strchr(d, ':')) ++ return false; ++ ++ return true; ++} ++ ++bool valid_home(const char *p) { ++ ++ if (isempty(p)) ++ return false; ++ ++ if (!utf8_is_valid(p)) ++ return false; ++ ++ if (string_has_cc(p, NULL)) ++ return false; ++ ++ if (!path_is_absolute(p)) ++ return false; ++ ++ if (!path_is_safe(p)) ++ return false; ++ ++ /* Colons are used as field separators, and hence not OK */ ++ if (strchr(p, ':')) ++ return false; ++ ++ return true; ++} +diff --git a/src/basic/user-util.h b/src/basic/user-util.h +index 8026eca3f..36f71fb00 100644 +--- a/src/basic/user-util.h ++++ b/src/basic/user-util.h +@@ -68,3 +68,8 @@ int take_etc_passwd_lock(const char *root); + static inline bool userns_supported(void) { + return access("/proc/self/uid_map", F_OK) >= 0; + } ++ ++bool valid_user_group_name(const char *u); ++bool valid_user_group_name_or_id(const char *u); ++bool valid_gecos(const char *d); ++bool valid_home(const char *p); +diff --git a/src/sysusers/sysusers.c b/src/sysusers/sysusers.c +index 4377f1b91..df3b7de30 100644 +--- a/src/sysusers/sysusers.c ++++ b/src/sysusers/sysusers.c +@@ -1299,81 +1299,6 @@ static bool item_equal(Item *a, Item *b) { + return true; + } + +-static bool valid_user_group_name(const char *u) { +- const char *i; +- long sz; +- +- if (isempty(u)) +- return false; +- +- if (!(u[0] >= 'a' && u[0] <= 'z') && +- !(u[0] >= 'A' && u[0] <= 'Z') && +- u[0] != '_') +- return false; +- +- for (i = u+1; *i; i++) { +- if (!(*i >= 'a' && *i <= 'z') && +- !(*i >= 'A' && *i <= 'Z') && +- !(*i >= '0' && *i <= '9') && +- *i != '_' && +- *i != '-') +- return false; +- } +- +- sz = sysconf(_SC_LOGIN_NAME_MAX); +- assert_se(sz > 0); +- +- if ((size_t) (i-u) > (size_t) sz) +- return false; +- +- if ((size_t) (i-u) > UT_NAMESIZE - 1) +- return false; +- +- return true; +-} +- +-static bool valid_gecos(const char *d) { +- +- if (!d) +- return false; +- +- if (!utf8_is_valid(d)) +- return false; +- +- if (string_has_cc(d, NULL)) +- return false; +- +- /* Colons are used as field separators, and hence not OK */ +- if (strchr(d, ':')) +- return false; +- +- return true; +-} +- +-static bool valid_home(const char *p) { +- +- if (isempty(p)) +- return false; +- +- if (!utf8_is_valid(p)) +- return false; +- +- if (string_has_cc(p, NULL)) +- return false; +- +- if (!path_is_absolute(p)) +- return false; +- +- if (!path_is_safe(p)) +- return false; +- +- /* Colons are used as field separators, and hence not OK */ +- if (strchr(p, ':')) +- return false; +- +- return true; +-} +- + static int parse_line(const char *fname, unsigned line, const char *buffer) { + + static const Specifier specifier_table[] = { +diff --git a/src/test/test-user-util.c b/src/test/test-user-util.c +index 8d1ec19f1..2a344a9f9 100644 +--- a/src/test/test-user-util.c ++++ b/src/test/test-user-util.c +@@ -61,6 +61,88 @@ static void test_uid_ptr(void) { + assert_se(PTR_TO_UID(UID_TO_PTR(1000)) == 1000); + } + ++static void test_valid_user_group_name(void) { ++ assert_se(!valid_user_group_name(NULL)); ++ assert_se(!valid_user_group_name("")); ++ assert_se(!valid_user_group_name("1")); ++ assert_se(!valid_user_group_name("65535")); ++ assert_se(!valid_user_group_name("-1")); ++ assert_se(!valid_user_group_name("-kkk")); ++ assert_se(!valid_user_group_name("rööt")); ++ assert_se(!valid_user_group_name(".")); ++ assert_se(!valid_user_group_name("eff.eff")); ++ assert_se(!valid_user_group_name("foo\nbar")); ++ assert_se(!valid_user_group_name("0123456789012345678901234567890123456789")); ++ assert_se(!valid_user_group_name_or_id("aaa:bbb")); ++ ++ assert_se(valid_user_group_name("root")); ++ assert_se(valid_user_group_name("lennart")); ++ assert_se(valid_user_group_name("LENNART")); ++ assert_se(valid_user_group_name("_kkk")); ++ assert_se(valid_user_group_name("kkk-")); ++ assert_se(valid_user_group_name("kk-k")); ++ ++ assert_se(valid_user_group_name("some5")); ++ assert_se(!valid_user_group_name("5some")); ++ assert_se(valid_user_group_name("INNER5NUMBER")); ++} ++ ++static void test_valid_user_group_name_or_id(void) { ++ assert_se(!valid_user_group_name_or_id(NULL)); ++ assert_se(!valid_user_group_name_or_id("")); ++ assert_se(valid_user_group_name_or_id("0")); ++ assert_se(valid_user_group_name_or_id("1")); ++ assert_se(valid_user_group_name_or_id("65534")); ++ assert_se(!valid_user_group_name_or_id("65535")); ++ assert_se(valid_user_group_name_or_id("65536")); ++ assert_se(!valid_user_group_name_or_id("-1")); ++ assert_se(!valid_user_group_name_or_id("-kkk")); ++ assert_se(!valid_user_group_name_or_id("rööt")); ++ assert_se(!valid_user_group_name_or_id(".")); ++ assert_se(!valid_user_group_name_or_id("eff.eff")); ++ assert_se(!valid_user_group_name_or_id("foo\nbar")); ++ assert_se(!valid_user_group_name_or_id("0123456789012345678901234567890123456789")); ++ assert_se(!valid_user_group_name_or_id("aaa:bbb")); ++ ++ assert_se(valid_user_group_name_or_id("root")); ++ assert_se(valid_user_group_name_or_id("lennart")); ++ assert_se(valid_user_group_name_or_id("LENNART")); ++ assert_se(valid_user_group_name_or_id("_kkk")); ++ assert_se(valid_user_group_name_or_id("kkk-")); ++ assert_se(valid_user_group_name_or_id("kk-k")); ++ ++ assert_se(valid_user_group_name_or_id("some5")); ++ assert_se(!valid_user_group_name_or_id("5some")); ++ assert_se(valid_user_group_name_or_id("INNER5NUMBER")); ++} ++ ++static void test_valid_gecos(void) { ++ ++ assert_se(!valid_gecos(NULL)); ++ assert_se(valid_gecos("")); ++ assert_se(valid_gecos("test")); ++ assert_se(valid_gecos("Ümläüt")); ++ assert_se(!valid_gecos("In\nvalid")); ++ assert_se(!valid_gecos("In:valid")); ++} ++ ++static void test_valid_home(void) { ++ ++ assert_se(!valid_home(NULL)); ++ assert_se(!valid_home("")); ++ assert_se(!valid_home(".")); ++ assert_se(!valid_home("/home/..")); ++ assert_se(!valid_home("/home/../")); ++ assert_se(!valid_home("/home\n/foo")); ++ assert_se(!valid_home("./piep")); ++ assert_se(!valid_home("piep")); ++ assert_se(!valid_home("/home/user:lennart")); ++ ++ assert_se(valid_home("/")); ++ assert_se(valid_home("/home")); ++ assert_se(valid_home("/home/foo")); ++} ++ + int main(int argc, char*argv[]) { + + test_uid_to_name_one(0, "root"); +@@ -75,5 +157,10 @@ int main(int argc, char*argv[]) { + test_parse_uid(); + test_uid_ptr(); + ++ test_valid_user_group_name(); ++ test_valid_user_group_name_or_id(); ++ test_valid_gecos(); ++ test_valid_home(); ++ + return 0; + } +-- +2.11.0 + + +From 1affacaaf6eff93e53563a644567cc5c3930cb28 Mon Sep 17 00:00:00 2001 +From: Lennart Poettering <lennart@poettering.net> +Date: Thu, 14 Jul 2016 12:28:06 +0200 +Subject: [PATCH 2/3] core: be stricter when parsing User=/Group= fields + +Let's verify the validity of the syntax of the user/group names set. +--- + src/core/load-fragment-gperf.gperf.m4 | 10 +-- + src/core/load-fragment.c | 118 ++++++++++++++++++++++++++++++++++ + src/core/load-fragment.h | 2 + + 3 files changed, 125 insertions(+), 5 deletions(-) + +diff --git a/src/core/load-fragment-gperf.gperf.m4 b/src/core/load-fragment-gperf.gperf.m4 +index 819341898..110089696 100644 +--- a/src/core/load-fragment-gperf.gperf.m4 ++++ b/src/core/load-fragment-gperf.gperf.m4 +@@ -19,9 +19,9 @@ m4_dnl Define the context options only once + m4_define(`EXEC_CONTEXT_CONFIG_ITEMS', + `$1.WorkingDirectory, config_parse_working_directory, 0, offsetof($1, exec_context) + $1.RootDirectory, config_parse_unit_path_printf, 0, offsetof($1, exec_context.root_directory) +-$1.User, config_parse_unit_string_printf, 0, offsetof($1, exec_context.user) +-$1.Group, config_parse_unit_string_printf, 0, offsetof($1, exec_context.group) +-$1.SupplementaryGroups, config_parse_strv, 0, offsetof($1, exec_context.supplementary_groups) ++$1.User, config_parse_user_group, 0, offsetof($1, exec_context.user) ++$1.Group, config_parse_user_group, 0, offsetof($1, exec_context.group) ++$1.SupplementaryGroups, config_parse_user_group_strv, 0, offsetof($1, exec_context.supplementary_groups) + $1.Nice, config_parse_exec_nice, 0, offsetof($1, exec_context) + $1.OOMScoreAdjust, config_parse_exec_oom_score_adjust, 0, offsetof($1, exec_context) + $1.IOSchedulingClass, config_parse_exec_io_class, 0, offsetof($1, exec_context) +@@ -275,8 +275,8 @@ Socket.ExecStartPost, config_parse_exec, SOCKET_EXEC + Socket.ExecStopPre, config_parse_exec, SOCKET_EXEC_STOP_PRE, offsetof(Socket, exec_command) + Socket.ExecStopPost, config_parse_exec, SOCKET_EXEC_STOP_POST, offsetof(Socket, exec_command) + Socket.TimeoutSec, config_parse_sec, 0, offsetof(Socket, timeout_usec) +-Socket.SocketUser, config_parse_unit_string_printf, 0, offsetof(Socket, user) +-Socket.SocketGroup, config_parse_unit_string_printf, 0, offsetof(Socket, group) ++Socket.SocketUser, config_parse_user_group, 0, offsetof(Socket, user) ++Socket.SocketGroup, config_parse_user_group, 0, offsetof(Socket, group) + Socket.SocketMode, config_parse_mode, 0, offsetof(Socket, socket_mode) + Socket.DirectoryMode, config_parse_mode, 0, offsetof(Socket, directory_mode) + Socket.Accept, config_parse_bool, 0, offsetof(Socket, accept) +diff --git a/src/core/load-fragment.c b/src/core/load-fragment.c +index 86b4fb071..f43781803 100644 +--- a/src/core/load-fragment.c ++++ b/src/core/load-fragment.c +@@ -64,6 +64,7 @@ + #include "unit-name.h" + #include "unit-printf.h" + #include "unit.h" ++#include "user-util.h" + #include "utf8.h" + #include "web-util.h" + +@@ -1758,6 +1759,123 @@ int config_parse_sec_fix_0( + return 0; + } + ++int config_parse_user_group( ++ const char *unit, ++ const char *filename, ++ unsigned line, ++ const char *section, ++ unsigned section_line, ++ const char *lvalue, ++ int ltype, ++ const char *rvalue, ++ void *data, ++ void *userdata) { ++ ++ char **user = data, *n; ++ Unit *u = userdata; ++ int r; ++ ++ assert(filename); ++ assert(lvalue); ++ assert(rvalue); ++ assert(u); ++ ++ if (isempty(rvalue)) ++ n = NULL; ++ else { ++ _cleanup_free_ char *k = NULL; ++ ++ r = unit_full_printf(u, rvalue, &k); ++ if (r < 0) { ++ log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in %s, ignoring: %m", rvalue); ++ return 0; ++ } ++ ++ if (!valid_user_group_name_or_id(k)) { ++ log_syntax(unit, LOG_ERR, filename, line, 0, "Invalid user/group name or numeric ID, ignoring: %s", k); ++ return 0; ++ } ++ ++ n = k; ++ k = NULL; ++ } ++ ++ free(*user); ++ *user = n; ++ ++ return 0; ++} ++ ++int config_parse_user_group_strv( ++ const char *unit, ++ const char *filename, ++ unsigned line, ++ const char *section, ++ unsigned section_line, ++ const char *lvalue, ++ int ltype, ++ const char *rvalue, ++ void *data, ++ void *userdata) { ++ ++ char ***users = data; ++ Unit *u = userdata; ++ const char *p; ++ int r; ++ ++ assert(filename); ++ assert(lvalue); ++ assert(rvalue); ++ assert(u); ++ ++ if (isempty(rvalue)) { ++ char **empty; ++ ++ empty = new0(char*, 1); ++ if (!empty) ++ return log_oom(); ++ ++ strv_free(*users); ++ *users = empty; ++ ++ return 0; ++ } ++ ++ p = rvalue; ++ for (;;) { ++ _cleanup_free_ char *word = NULL, *k = NULL; ++ ++ r = extract_first_word(&p, &word, WHITESPACE, 0); ++ if (r == 0) ++ break; ++ if (r == -ENOMEM) ++ return log_oom(); ++ if (r < 0) { ++ log_syntax(unit, LOG_ERR, filename, line, r, "Invalid syntax, ignoring: %s", rvalue); ++ break; ++ } ++ ++ r = unit_full_printf(u, word, &k); ++ if (r < 0) { ++ log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in %s, ignoring: %m", word); ++ continue; ++ } ++ ++ if (!valid_user_group_name_or_id(k)) { ++ log_syntax(unit, LOG_ERR, filename, line, 0, "Invalid user/group name or numeric ID, ignoring: %s", k); ++ continue; ++ } ++ ++ r = strv_push(users, k); ++ if (r < 0) ++ return log_oom(); ++ ++ k = NULL; ++ } ++ ++ return 0; ++} ++ + int config_parse_busname_service( + const char *unit, + const char *filename, +diff --git a/src/core/load-fragment.h b/src/core/load-fragment.h +index b36a2e3a0..213bce55a 100644 +--- a/src/core/load-fragment.h ++++ b/src/core/load-fragment.h +@@ -111,6 +111,8 @@ int config_parse_exec_utmp_mode(const char *unit, const char *filename, unsigned + int config_parse_working_directory(const char *unit, const char *filename, unsigned line, const char *section, unsigned section_line, const char *lvalue, int ltype, const char *rvalue, void *data, void *userdata); + int config_parse_fdname(const char *unit, const char *filename, unsigned line, const char *section, unsigned section_line, const char *lvalue, int ltype, const char *rvalue, void *data, void *userdata); + int config_parse_sec_fix_0(const char *unit, const char *filename, unsigned line, const char *section, unsigned section_line, const char *lvalue, int ltype, const char *rvalue, void *data, void *userdata); ++int config_parse_user_group(const char *unit, const char *filename, unsigned line, const char *section, unsigned section_line, const char *lvalue, int ltype, const char *rvalue, void *data, void *userdata); ++int config_parse_user_group_strv(const char *unit, const char *filename, unsigned line, const char *section, unsigned section_line, const char *lvalue, int ltype, const char *rvalue, void *data, void *userdata); + + /* gperf prototypes */ + const struct ConfigPerfItem* load_fragment_gperf_lookup(const char *key, unsigned length); +-- +2.11.0 + + +From 97e0456384ed5c930394062d340237ea6130ece0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Zbigniew=20J=C4=99drzejewski-Szmek?= <zbyszek@in.waw.pl> +Date: Thu, 6 Jul 2017 13:28:19 -0400 +Subject: [PATCH 3/3] core/load-fragment: refuse units with errors in certain + directives + +If an error is encountered in any of the Exec* lines, WorkingDirectory, +SELinuxContext, ApparmorProfile, SmackProcessLabel, Service (in .socket +units), User, or Group, refuse to load the unit. If the config stanza +has support, ignore the failure if '-' is present. + +For those configuration directives, even if we started the unit, it's +pretty likely that it'll do something unexpected (like write files +in a wrong place, or with a wrong context, or run with wrong permissions, +etc). It seems better to refuse to start the unit and have the admin +clean up the configuration without giving the service a chance to mess +up stuff. + +Note that all "security" options that restrict what the unit can do +(Capabilities, AmbientCapabilities, Restrict*, SystemCallFilter, Limit*, +PrivateDevices, Protect*, etc) are _not_ treated like this. Such options are +only supplementary, and are not always available depending on the architecture +and compilation options, so unit authors have to make sure that the service +runs correctly without them anyway. + +Fixes #6237, #6277. + +Signed-off-by: Ross Burton <ross.burton@intel.com> +--- + src/core/load-fragment.c | 101 ++++++++++++++++++++++++++++------------------ + src/test/test-unit-file.c | 14 +++---- + 2 files changed, 69 insertions(+), 46 deletions(-) + +diff --git a/src/core/load-fragment.c b/src/core/load-fragment.c +index f43781803..b1fb1d407 100644 +--- a/src/core/load-fragment.c ++++ b/src/core/load-fragment.c +@@ -626,20 +626,28 @@ int config_parse_exec( + + if (isempty(f)) { + /* First word is either "-" or "@" with no command. */ +- log_syntax(unit, LOG_ERR, filename, line, 0, "Empty path in command line, ignoring: \"%s\"", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, ++ "Empty path in command line%s: \"%s\"", ++ ignore ? ", ignoring" : "", rvalue); ++ return ignore ? 0 : -ENOEXEC; + } + if (!string_is_safe(f)) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Executable path contains special characters, ignoring: %s", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, ++ "Executable path contains special characters%s: %s", ++ ignore ? ", ignoring" : "", rvalue); ++ return ignore ? 0 : -ENOEXEC; + } + if (!path_is_absolute(f)) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Executable path is not absolute, ignoring: %s", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, ++ "Executable path is not absolute%s: %s", ++ ignore ? ", ignoring" : "", rvalue); ++ return ignore ? 0 : -ENOEXEC; + } + if (endswith(f, "/")) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Executable path specifies a directory, ignoring: %s", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, ++ "Executable path specifies a directory%s: %s", ++ ignore ? ", ignoring" : "", rvalue); ++ return ignore ? 0 : -ENOEXEC; + } + + if (f == firstword) { +@@ -695,7 +703,7 @@ int config_parse_exec( + if (r == 0) + break; + else if (r < 0) +- return 0; ++ return ignore ? 0 : -ENOEXEC; + + if (!GREEDY_REALLOC(n, nbufsize, nlen + 2)) + return log_oom(); +@@ -705,8 +713,10 @@ int config_parse_exec( + } + + if (!n || !n[0]) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Empty executable name or zeroeth argument, ignoring: %s", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, ++ "Empty executable name or zeroeth argument%s: %s", ++ ignore ? ", ignoring" : "", rvalue); ++ return ignore ? 0 : -ENOEXEC; + } + + nce = new0(ExecCommand, 1); +@@ -1214,8 +1224,10 @@ int config_parse_exec_selinux_context( + + r = unit_name_printf(u, rvalue, &k); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve specifiers, ignoring: %m"); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, ++ "Failed to resolve specifiers%s: %m", ++ ignore ? ", ignoring" : ""); ++ return ignore ? 0 : -ENOEXEC; + } + + free(c->selinux_context); +@@ -1262,8 +1274,10 @@ int config_parse_exec_apparmor_profile( + + r = unit_name_printf(u, rvalue, &k); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve specifiers, ignoring: %m"); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, ++ "Failed to resolve specifiers%s: %m", ++ ignore ? ", ignoring" : ""); ++ return ignore ? 0 : -ENOEXEC; + } + + free(c->apparmor_profile); +@@ -1310,8 +1324,10 @@ int config_parse_exec_smack_process_label( + + r = unit_name_printf(u, rvalue, &k); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve specifiers, ignoring: %m"); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, ++ "Failed to resolve specifiers%s: %m", ++ ignore ? ", ignoring" : ""); ++ return ignore ? 0 : -ENOEXEC; + } + + free(c->smack_process_label); +@@ -1520,19 +1536,19 @@ int config_parse_socket_service( + + r = unit_name_printf(UNIT(s), rvalue, &p); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve specifiers, ignoring: %s", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve specifiers: %s", rvalue); ++ return -ENOEXEC; + } + + if (!endswith(p, ".service")) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Unit must be of type service, ignoring: %s", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, "Unit must be of type service: %s", rvalue); ++ return -ENOEXEC; + } + + r = manager_load_unit(UNIT(s)->manager, p, NULL, &error, &x); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to load unit %s, ignoring: %s", rvalue, bus_error_message(&error, r)); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, "Failed to load unit %s: %s", rvalue, bus_error_message(&error, r)); ++ return -ENOEXEC; + } + + unit_ref_set(&s->service, x); +@@ -1787,13 +1803,13 @@ int config_parse_user_group( + + r = unit_full_printf(u, rvalue, &k); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in %s, ignoring: %m", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in %s: %m", rvalue); ++ return -ENOEXEC; + } + + if (!valid_user_group_name_or_id(k)) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Invalid user/group name or numeric ID, ignoring: %s", k); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, "Invalid user/group name or numeric ID: %s", k); ++ return -ENOEXEC; + } + + n = k; +@@ -1851,19 +1867,19 @@ int config_parse_user_group_strv( + if (r == -ENOMEM) + return log_oom(); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Invalid syntax, ignoring: %s", rvalue); +- break; ++ log_syntax(unit, LOG_ERR, filename, line, r, "Invalid syntax: %s", rvalue); ++ return -ENOEXEC; + } + + r = unit_full_printf(u, word, &k); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in %s, ignoring: %m", word); +- continue; ++ log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in %s: %m", word); ++ return -ENOEXEC; + } + + if (!valid_user_group_name_or_id(k)) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Invalid user/group name or numeric ID, ignoring: %s", k); +- continue; ++ log_syntax(unit, LOG_ERR, filename, line, 0, "Invalid user/group name or numeric ID: %s", k); ++ return -ENOEXEC; + } + + r = strv_push(users, k); +@@ -2022,20 +2038,24 @@ int config_parse_working_directory( + + r = unit_full_printf(u, rvalue, &k); + if (r < 0) { +- log_syntax(unit, LOG_ERR, filename, line, r, "Failed to resolve unit specifiers in working directory path '%s', ignoring: %m", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, r, ++ "Failed to resolve unit specifiers in working directory path '%s'%s: %m", ++ rvalue, missing_ok ? ", ignoring" : ""); ++ return missing_ok ? 0 : -ENOEXEC; + } + + path_kill_slashes(k); + + if (!utf8_is_valid(k)) { + log_syntax_invalid_utf8(unit, LOG_ERR, filename, line, rvalue); +- return 0; ++ return missing_ok ? 0 : -ENOEXEC; + } + + if (!path_is_absolute(k)) { +- log_syntax(unit, LOG_ERR, filename, line, 0, "Working directory path '%s' is not absolute, ignoring.", rvalue); +- return 0; ++ log_syntax(unit, LOG_ERR, filename, line, 0, ++ "Working directory path '%s' is not absolute%s.", ++ rvalue, missing_ok ? ", ignoring" : ""); ++ return missing_ok ? 0 : -ENOEXEC; + } + + free(c->working_directory); +@@ -4043,8 +4063,11 @@ int unit_load_fragment(Unit *u) { + return r; + + r = load_from_path(u, k); +- if (r < 0) ++ if (r < 0) { ++ if (r == -ENOEXEC) ++ log_unit_notice(u, "Unit configuration has fatal error, unit will not be started."); + return r; ++ } + + if (u->load_state == UNIT_STUB) { + SET_FOREACH(t, u->names, i) { +diff --git a/src/test/test-unit-file.c b/src/test/test-unit-file.c +index ade0ff2a6..fe1969570 100644 +--- a/src/test/test-unit-file.c ++++ b/src/test/test-unit-file.c +@@ -146,7 +146,7 @@ static void test_config_parse_exec(void) { + r = config_parse_exec(NULL, "fake", 4, "section", 1, + "LValue", 0, "/RValue/ argv0 r1", + &c, u); +- assert_se(r == 0); ++ assert_se(r == -ENOEXEC); + assert_se(c1->command_next == NULL); + + log_info("/* honour_argv0 */"); +@@ -161,7 +161,7 @@ static void test_config_parse_exec(void) { + r = config_parse_exec(NULL, "fake", 3, "section", 1, + "LValue", 0, "@/RValue", + &c, u); +- assert_se(r == 0); ++ assert_se(r == -ENOEXEC); + assert_se(c1->command_next == NULL); + + log_info("/* no command, whitespace only, reset */"); +@@ -220,7 +220,7 @@ static void test_config_parse_exec(void) { + "-@/RValue argv0 r1 ; ; " + "/goo/goo boo", + &c, u); +- assert_se(r >= 0); ++ assert_se(r == -ENOEXEC); + c1 = c1->command_next; + check_execcommand(c1, "/RValue", "argv0", "r1", NULL, true); + +@@ -374,7 +374,7 @@ static void test_config_parse_exec(void) { + r = config_parse_exec(NULL, "fake", 4, "section", 1, + "LValue", 0, path, + &c, u); +- assert_se(r == 0); ++ assert_se(r == -ENOEXEC); + assert_se(c1->command_next == NULL); + } + +@@ -401,21 +401,21 @@ static void test_config_parse_exec(void) { + r = config_parse_exec(NULL, "fake", 4, "section", 1, + "LValue", 0, "/path\\", + &c, u); +- assert_se(r == 0); ++ assert_se(r == -ENOEXEC); + assert_se(c1->command_next == NULL); + + log_info("/* missing ending ' */"); + r = config_parse_exec(NULL, "fake", 4, "section", 1, + "LValue", 0, "/path 'foo", + &c, u); +- assert_se(r == 0); ++ assert_se(r == -ENOEXEC); + assert_se(c1->command_next == NULL); + + log_info("/* missing ending ' with trailing backslash */"); + r = config_parse_exec(NULL, "fake", 4, "section", 1, + "LValue", 0, "/path 'foo\\", + &c, u); +- assert_se(r == 0); ++ assert_se(r == -ENOEXEC); + assert_se(c1->command_next == NULL); + + log_info("/* invalid space between modifiers */"); +-- +2.11.0 + diff --git a/import-layers/yocto-poky/meta/recipes-core/systemd/systemd_232.bb b/import-layers/yocto-poky/meta/recipes-core/systemd/systemd_232.bb index 19a6d309b..df1d9e137 100644 --- a/import-layers/yocto-poky/meta/recipes-core/systemd/systemd_232.bb +++ b/import-layers/yocto-poky/meta/recipes-core/systemd/systemd_232.bb @@ -24,7 +24,7 @@ SRC_URI += " \ file://0009-util-bypass-unimplemented-_SC_PHYS_PAGES-system-conf.patch \ file://0010-implment-systemd-sysv-install-for-OE.patch \ file://0011-nss-mymachines-Build-conditionally-when-HAVE_MYHOSTN.patch \ - file://0012-rules-whitelist-hd-devices.patch \ + file://0012-rules-whitelist-hd-devices.patch \ file://0013-Make-root-s-home-directory-configurable.patch \ file://0014-Revert-rules-remove-firmware-loading-rules.patch \ file://0015-Revert-udev-remove-userspace-firmware-loading-suppor.patch \ diff --git a/import-layers/yocto-poky/meta/recipes-core/udev/eudev_3.2.bb b/import-layers/yocto-poky/meta/recipes-core/udev/eudev_3.2.bb index 211252ceb..857d20db7 100644 --- a/import-layers/yocto-poky/meta/recipes-core/udev/eudev_3.2.bb +++ b/import-layers/yocto-poky/meta/recipes-core/udev/eudev_3.2.bb @@ -1,6 +1,7 @@ SUMMARY = "eudev is a fork of systemd's udev" HOMEPAGE = "https://wiki.gentoo.org/wiki/Eudev" -LICENSE = "GPLv2.0+" +LICENSE = "GPLv2.0+ & LGPL-2.1+" +LICENSE_libudev = "LGPL-2.1+" LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" DEPENDS = "glib-2.0 glib-2.0-native gperf-native kmod libxslt-native util-linux" diff --git a/import-layers/yocto-poky/meta/recipes-core/util-linux/util-linux.inc b/import-layers/yocto-poky/meta/recipes-core/util-linux/util-linux.inc index c6355021f..70cba6b59 100644 --- a/import-layers/yocto-poky/meta/recipes-core/util-linux/util-linux.inc +++ b/import-layers/yocto-poky/meta/recipes-core/util-linux/util-linux.inc @@ -271,9 +271,11 @@ BBCLASSEXTEND = "native nativesdk" python do_package_prepend () { if '--enable-su' in d.getVar('EXTRA_OECONF', True).split(): - alt_name = "su" - d.setVarFlag('ALTERNATIVE_LINK_NAME', alt_name, '%s/%s' % (d.getVar('base_bindir', True), alt_name)) - d.appendVar('ALTERNATIVE_%s' % (d.getVar('PN', True)), ' ' + alt_name) + d.appendVar(d.expand('ALTERNATIVE_${PN}'), ' su') + d.appendVar(d.expand('ALTERNATIVE_${PN}-doc'), ' su.1') + + d.setVarFlag('ALTERNATIVE_LINK_NAME', "su", d.expand('${base_bindir}/su')) + d.setVarFlag('ALTERNATIVE_LINK_NAME', "su.1", d.expand('${mandir}/man1/su.1')) } python populate_packages_prepend() { diff --git a/import-layers/yocto-poky/meta/recipes-core/volatile-binds/volatile-binds.bb b/import-layers/yocto-poky/meta/recipes-core/volatile-binds/volatile-binds.bb index fee7275e3..130ab55f0 100644 --- a/import-layers/yocto-poky/meta/recipes-core/volatile-binds/volatile-binds.bb +++ b/import-layers/yocto-poky/meta/recipes-core/volatile-binds/volatile-binds.bb @@ -17,6 +17,9 @@ REQUIRED_DISTRO_FEATURES = "systemd" VOLATILE_BINDS ?= "\ /var/volatile/lib /var/lib\n\ + /var/volatile/cache /var/cache\n\ + /var/volatile/spool /var/spool\n\ + /var/volatile/srv /srv\n\ " VOLATILE_BINDS[type] = "list" VOLATILE_BINDS[separator] = "\n" @@ -67,5 +70,11 @@ do_install () { for service in ${SYSTEMD_SERVICE_volatile-binds}; do install -m 0644 $service ${D}${systemd_unitdir}/system/ done + + # Suppress attempts to process some tmpfiles that are not temporary. + # + install -d ${D}${sysconfdir}/tmpfiles.d ${D}/var/cache + ln -s /dev/null ${D}${sysconfdir}/tmpfiles.d/etc.conf + ln -s /dev/null ${D}${sysconfdir}/tmpfiles.d/home.conf } do_install[dirs] = "${WORKDIR}" diff --git a/import-layers/yocto-poky/meta/recipes-core/zlib/zlib_1.2.8.bb b/import-layers/yocto-poky/meta/recipes-core/zlib/zlib_1.2.8.bb index 9470adb1b..913c7033d 100644 --- a/import-layers/yocto-poky/meta/recipes-core/zlib/zlib_1.2.8.bb +++ b/import-layers/yocto-poky/meta/recipes-core/zlib/zlib_1.2.8.bb @@ -6,7 +6,7 @@ SECTION = "libs" LICENSE = "Zlib" LIC_FILES_CHKSUM = "file://zlib.h;beginline=4;endline=23;md5=fde612df1e5933c428b73844a0c494fd" -SRC_URI = "http://www.zlib.net/${BPN}-${PV}.tar.xz \ +SRC_URI = "${SOURCEFORGE_MIRROR}/libpng/${BPN}/${PV}/${BPN}-${PV}.tar.xz \ file://remove.ldconfig.call.patch \ file://Makefile-runtests.patch \ file://ldflags-tests.patch \ |