diff options
Diffstat (limited to 'meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl')
4 files changed, 85 insertions, 27 deletions
diff --git a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service index 95c770837..d23ef909c 100644 --- a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service +++ b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service @@ -5,5 +5,5 @@ After=host-gpio.service [Service] Type=oneshot -ExecStart=/usr/sbin/power-util mb 1 off +ExecStart=/usr/sbin/power-util mb off SyslogIdentifier=power-util diff --git a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service index b070edac2..446df3850 100644 --- a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service +++ b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service @@ -5,7 +5,7 @@ After=host-gpio.service [Service] Type=oneshot -ExecStart=/usr/sbin/power-util mb 1 on +ExecStart=/usr/sbin/power-util mb on SyslogIdentifier=power-util [Install] diff --git a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util index 59f91ece7..a2261fb81 100755 --- a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util +++ b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util @@ -1,48 +1,96 @@ #!/bin/bash # Usage of this utility function usage() { - echo "usage: power-util mb 1 [on|off]"; + echo "usage: power-util mb [on|off|status|cycle|reset]"; + echo " power-util sled-cycle" } GPIO_BASE=$(cat /sys/class/gpio/gpio*/base) PWR_GPIO=$(($GPIO_BASE + 32 + 3)) BMC_RDY_GPIO=$(($GPIO_BASE + 144 +1)) +PWR_GOOD=$(($GPIO_BASE + 8 + 6)) +PWR_RESET=$(($GPIO_BASE + 33)) -if [ $# -lt 3 ]; then +power_off() { + echo "Shutting down Server $2" + echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value + sleep 1 + echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value + sleep 6 + echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value +} + +power_on() { + echo "Powering on Server $2" + echo 0 > /sys/class/gpio/gpio${BMC_RDY_GPIO}/value + echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value + echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value + sleep 1 + echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value +} + +power_status() { + st=$(cat /sys/class/gpio/gpio${PWR_GOOD}/value) + if [ "$st" == "0" ]; then + echo "off" + else + echo "on" + fi +} + +power_reset() { + echo "Reset on server $2" + echo 0 > /sys/class/gpio/gpio${PWR_RESET}/value + sleep 0.1 + echo 1 > /sys/class/gpio/gpio${PWR_RESET}/value +} + +sled_cycle() { + i2cset -y 7 0x45 0xd9 c +} + +if [ $# -lt 2 ]; then echo "Total number of parameter=$#" echo "Insufficient parameter" usage; exit 0; fi -if [ $1 != "mb" ]; then - echo "Invalid parameter1=$1" - usage; - exit 0; +if [ $1 == "sled-cycle" ]; then + sled_cycle fi -if [ $2 -ne 1 ]; then - echo "Invalid parameter2=$2, Server $2 not supported" +if [ $1 != "mb" ]; then + echo "Invalid parameter1=$1" usage; exit 0; fi -if [ $3 = "on" ]; then - echo "Powering on Server $2" - echo 0 > /sys/class/gpio/gpio${BMC_RDY_GPIO}/value - echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value - echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value - sleep 1 - echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value -elif [ $3 = "off" ]; then - echo "Shutting down Server $2" - echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value - sleep 1 - echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value - sleep 6 - echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value +if [ $2 = "on" ]; then + if [ $(power_status) == "off" ]; then + power_on + fi +elif [ $2 = "off" ]; then + if [ $(power_status) == "on" ]; then + power_off + fi +elif [ $2 == "cycle" ]; then + if [ $(power_status) == "on" ]; then + power_off + else + echo "WARNING: Powering on server" + fi + power_on +elif [ $2 == "reset" ]; then + if [ $(power_status) == "on" ]; then + power_reset + else + echo "ERROR: Server not powered on" + fi +elif [ $2 == "status" ]; then + power_status else - echo "Invalid parameter3=$3" + echo "Invalid parameter2=$2" usage; fi diff --git a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh index 4e13109cb..1b1b2e3f0 100755 --- a/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh +++ b/meta-facebook/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh @@ -17,12 +17,22 @@ GPIO_BASE=$(cat /sys/class/gpio/gpio*/base) set_gpio_active_low $((${GPIO_BASE} + 144 +1)) high # FM_BMC_SSB_SMI_LPC_N, GPIO Q6, active low -set_gpio_active_low $((${GPIO_BASE} + 128 + 6)) high +#set_gpio_active_low $((${GPIO_BASE} + 128 + 6)) high # FP_PWR_BTN_PASS_R_N, GPIO E3, active low set_gpio_active_low $((${GPIO_BASE} + 32 + 3)) high # FP_PWR_GOOD, GPIO B6, active low -set_gpio_active_low $((${GPIO_BASE} + 8 + 6)) high +set_gpio_active_low $((${GPIO_BASE} + 8 + 6)) in + +# SYSRST_BTN_OUT_N, GPIO E1, active low +set_gpio_active_low $((${GPIO_BASE} + 32 + 1)) high + +# FP_PECI_MUX, active low +set_gpio_active_low $((${GPIO_BASE} + 212)) high + +# Set PECI Mux to high to select Peci interface +echo 1 > /sys/class/gpio/gpio$((${GPIO_BASE} + 212))/value + exit 0; |