diff options
Diffstat (limited to 'meta-openbmc-machines/meta-x86/meta-mellanox/meta-msn/recipes-phosphor/initfs/files/obmc-update_all.sh')
-rw-r--r-- | meta-openbmc-machines/meta-x86/meta-mellanox/meta-msn/recipes-phosphor/initfs/files/obmc-update_all.sh | 54 |
1 files changed, 0 insertions, 54 deletions
diff --git a/meta-openbmc-machines/meta-x86/meta-mellanox/meta-msn/recipes-phosphor/initfs/files/obmc-update_all.sh b/meta-openbmc-machines/meta-x86/meta-mellanox/meta-msn/recipes-phosphor/initfs/files/obmc-update_all.sh deleted file mode 100644 index fbcf466d6..000000000 --- a/meta-openbmc-machines/meta-x86/meta-mellanox/meta-msn/recipes-phosphor/initfs/files/obmc-update_all.sh +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/sh -# -# Script to burn entire 32MB of BMC SPI Flash -# -# Usage: -# a) Local: /run/initramfs/update_all <bmc-image-file> -# b) Remote: sshpass -p "<root-password>" ssh root@<ip> '/run/initramfs/update_all <bmc-image-file>' -# -# Assumptions: -# <bmc-image-file> is a 32MB file representing all partitions in BMC SPI Flash -# <bmc-image-file> exists on local filesystem -# /dev/mtd0 represents entire BMC SPI Flash device -# /dev/mtd5 is a JFFS2 filesystem (rwfs) partition -# /bsp/reset/bmc_upgrade is symlink pointing to proper sticky bit in CPLD -# - -if [ -f $1 ] -then - echo $0: Update BMC SPI Flash with $1 -else - echo $0: File $1 not found on target, exiting - exit -fi - -echo $0: Stopping system services -systemctl stop mlx_ipmid - -echo $0: Remounting rwfs "(/dev/mtd5)" as read-only -mount /dev/mtdblock5 /run/initramfs/rw -t jffs2 -o remount,ro - -echo $0: Unmounting rofs "(/dev/mtd4)" -umount /dev/mtdblock4 - -MAC=`fw_printenv ethaddr | sed -n "s/^ethaddr=//p"` - -echo $0: Burning SPI Flash "(/dev/mtd0)" with image "$1" -/usr/sbin/flashcp -v $1 /dev/mtd0 - -if [ -v $MAC ]; then - echo "MAC env variable not exist. Set eth0 MAC from eeprom." - MAC=`hexdump -n 6 -s 0xf0 -v -e '/1 "%02x:"' /sys/bus/i2c/devices/6-0055/eeprom`;MAC=${MAC::-1}; -else - echo "MAC env variable exist. Set eth0 MAC from env." -fi; -fw_setenv ethaddr $MAC - -echo $0: Setting bmc_upgrade sticky bit in CPLD -echo 1 > /bsp/reset/bmc_upgrade - -echo $0: Rebooting BMC -echo 0 > /bsp/reset/bmc_reset_soft - - - |