diff options
Diffstat (limited to 'meta-openbmc-mods/meta-ast2600/recipes-bsp/u-boot/files/0006-SPI-Quad-IO-Mode.patch')
-rw-r--r-- | meta-openbmc-mods/meta-ast2600/recipes-bsp/u-boot/files/0006-SPI-Quad-IO-Mode.patch | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/meta-openbmc-mods/meta-ast2600/recipes-bsp/u-boot/files/0006-SPI-Quad-IO-Mode.patch b/meta-openbmc-mods/meta-ast2600/recipes-bsp/u-boot/files/0006-SPI-Quad-IO-Mode.patch new file mode 100644 index 000000000..34d8b1abb --- /dev/null +++ b/meta-openbmc-mods/meta-ast2600/recipes-bsp/u-boot/files/0006-SPI-Quad-IO-Mode.patch @@ -0,0 +1,105 @@ +From c438edace30a3408c827faaae2d5004fe5ae010d Mon Sep 17 00:00:00 2001 +From: arun-pm <arun.p.m@linux.intel.com> +Date: Fri, 29 Nov 2019 00:19:09 +0530 +Subject: [PATCH] SPI Quad IO Mode + +This commit adds quad IO mode in SPI driver for AST2600. + +Note:- Removed n25q00 Quad I/O support for the time being due to clock issue + with chip 'Micron 8UA15 - rw182 (128MB)' while enabling Quad I/O mode. +--- + arch/arm/dts/ast2600-intel.dts | 6 ++---- + drivers/mtd/spi/spi-nor-ids.c | 7 ++++++- + drivers/spi/aspeed_spi.c | 18 +++++++++++++++++- + 3 files changed, 25 insertions(+), 6 deletions(-) + mode change 100755 => 100644 drivers/spi/aspeed_spi.c + +diff --git a/arch/arm/dts/ast2600-intel.dts b/arch/arm/dts/ast2600-intel.dts +index d16581c5811d..ab78b516b6a3 100644 +--- a/arch/arm/dts/ast2600-intel.dts ++++ b/arch/arm/dts/ast2600-intel.dts +@@ -101,16 +101,14 @@ + + &fmc { + status = "okay"; +-#if 0 + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fmcquad_default>; +-#endif + flash@0 { + compatible = "spi-flash", "sst,w25q256"; + status = "okay"; + spi-max-frequency = <40000000>; +- spi-tx-bus-width = <2>; +- spi-rx-bus-width = <2>; ++ spi-tx-bus-width = <4>; ++ spi-rx-bus-width = <4>; + }; + }; + +diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c +index ad733e71988b..257ab472305c 100644 +--- a/drivers/mtd/spi/spi-nor-ids.c ++++ b/drivers/mtd/spi/spi-nor-ids.c +@@ -164,7 +164,12 @@ const struct flash_info spi_nor_ids[] = { + { INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, +- { INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, ++ /* Removed n25q00 Quad I/O support for the time being due to clock issue with chip 'Micron 8UA15 - rw182 (128MB)' ++ * while enabling Quad I/O mode. As this chip is default shipped in platforms, marking it ++ * as Not supported for the time being. Once all chips are replaced with the new model, this can be enabled ++ * back(Note:- Certain other chips having same name(n25q00) but different part number has no issues). ++ */ ++ { INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | NO_CHIP_ERASE) }, + { INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + #endif +diff --git a/drivers/spi/aspeed_spi.c b/drivers/spi/aspeed_spi.c +old mode 100755 +new mode 100644 +index c7b998fadfde..930b18443a48 +--- a/drivers/spi/aspeed_spi.c ++++ b/drivers/spi/aspeed_spi.c +@@ -16,6 +16,9 @@ + #include <linux/ioport.h> + + #define ASPEED_SPI_MAX_CS 3 ++#define AST2600A0 0x05000303 ++#define AST2600A0_MAX_FREQ 40000000 ++#define AST_MAX_FREQ 100000000 + + struct aspeed_spi_regs { + u32 conf; /* 0x00 CE Type Setting */ +@@ -1011,6 +1014,19 @@ static int aspeed_spi_bind(struct udevice *bus) + return 0; + } + ++static int aspeed_get_max_freq(void) ++{ ++ u32 rev_id = readl(ASPEED_REVISION_ID); ++ ++ /*Limit max spi frequency less than 50MHz on AST2600-A0 due ++ * to FWSPICLK signal quality issue. ++ */ ++ if(rev_id == AST2600A0) ++ return AST2600A0_MAX_FREQ; ++ else ++ return AST_MAX_FREQ; ++} ++ + static int aspeed_spi_probe(struct udevice *bus) + { + struct resource res_regs, res_ahb; +@@ -1041,7 +1057,7 @@ static int aspeed_spi_probe(struct udevice *bus) + clk_free(&hclk); + + priv->max_hz = dev_read_u32_default(bus, "spi-max-frequency", +- 100000000); ++ aspeed_get_max_freq()); + + priv->num_cs = dev_read_u32_default(bus, "num-cs", ASPEED_SPI_MAX_CS); + +-- +2.7.4 + |