diff options
Diffstat (limited to 'meta-openbmc-mods/meta-common/recipes-bsp/u-boot/files/0019-u-boot-full-platform-reset-espi-oob-ready.patch')
-rw-r--r-- | meta-openbmc-mods/meta-common/recipes-bsp/u-boot/files/0019-u-boot-full-platform-reset-espi-oob-ready.patch | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/meta-openbmc-mods/meta-common/recipes-bsp/u-boot/files/0019-u-boot-full-platform-reset-espi-oob-ready.patch b/meta-openbmc-mods/meta-common/recipes-bsp/u-boot/files/0019-u-boot-full-platform-reset-espi-oob-ready.patch new file mode 100644 index 000000000..8a63edbb7 --- /dev/null +++ b/meta-openbmc-mods/meta-common/recipes-bsp/u-boot/files/0019-u-boot-full-platform-reset-espi-oob-ready.patch @@ -0,0 +1,46 @@ +From 9b05a276af65dd436f30b1b2680a09821c5a81aa Mon Sep 17 00:00:00 2001 +From: Vernon Mauery <vernon.mauery@intel.com> +Date: Mon, 17 Dec 2018 20:37:23 -0800 +Subject: [PATCH] u-boot: full platform reset + espi oob-ready + +If the platform is strapped for fast reset, have platform-g5.S do a full +reset and then immediately set oob-ready so the espi master controller +can initiate communication. + +Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com> + +--- + arch/arm/mach-aspeed/platform_g5.S | 13 ++++++++++++- + 1 file changed, 12 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/mach-aspeed/platform_g5.S b/arch/arm/mach-aspeed/platform_g5.S +index 2ac1ca4..66427b6 100644 +--- a/arch/arm/mach-aspeed/platform_g5.S ++++ b/arch/arm/mach-aspeed/platform_g5.S +@@ -139,7 +139,7 @@ + But if FW has other initial code executed before platform.S, then it should use WDT_SOC mode. + Use WDT_Full may clear the initial result of prior initial code. + ******************************************************************************/ +-//#define ASTMMC_INIT_RESET_MODE_FULL ++#define ASTMMC_INIT_RESET_MODE_FULL + + /****************************************************************************** + There is a compatibility issue for Hynix DDR4 SDRAM. +@@ -563,6 +563,17 @@ wait_first_reset: + *******************************************/ + + bypass_first_reset: ++ /* Timing from ESPI master requires OOB channel ready bit be set early */ ++ ldr r0, =0x1e6e2070 @ check strapping for eSPI mode ++ tst r0, #0x02000000 @ Test for bit 25 - eSPI Mode ++ beq espi_early_init_done @ if bit 25 clear, dont set OOB ready ++ ++ ldr r0, =0x1e6ee000 ++ ldr r1, [r0] @ ESPI000: ESPI Engine Control Reg ++ orr r1, r1, #0x00000010 @ Set OOB Channel Ready bit ++ str r1, [r0] ++espi_early_init_done: ++ + /* Enable Timer separate clear mode */ + ldr r0, =0x1e782038 + mov r1, #0xAE |