diff options
Diffstat (limited to 'meta-openbmc-mods/meta-common/recipes-intel/intel-pfr')
4 files changed, 487 insertions, 0 deletions
diff --git a/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/files/pfr_image.py b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/files/pfr_image.py new file mode 100755 index 000000000..baa174349 --- /dev/null +++ b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/files/pfr_image.py @@ -0,0 +1,439 @@ +#!/usr/bin/env python3 + +# Copyright (c) 2020 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# coding: utf-8 +# our image is contained as parts, including the hash +# then it gets zipped up and signed again + +# this internal signature is for boot and recovery, but +# will be checked prior to writing to flash as well. + +# the internal signature format is a PFR-specific block +# including a hash bitmap, certificates (public keys), +# and the actual signature data as well, for both active +# and recovery images + +# TODO: figure out if active and recovery actually have different sigs +# TODO: build hashmap from payload manifest +# TODO: figure out exact struct layout for PFR metadata +import os, hashlib, struct, json, sys, subprocess, mmap, io, array, binascii, copy, shutil, re, getopt +from array import array +from binascii import unhexlify +from hashlib import sha1, sha256, sha384, sha512 +from shutil import copyfile +# Flash Map +# ----------------------------------------------- +# Start addr Contents +# 0x00000000 S U-Boot +# 0x00080000 S+ PFM +# 0x000a0000 U U-boot Env +# 0x000C0000 U SOFS +# 0x002c0000 U RWFS +# 0x00b00000 S fit-image +# 0x02a00000 S+ rc-image +# 0x04a00000 U staging-image +# * partially signed (not full 64k page) +# + unsigned, owned by pfr + +# TODO: The below defines should go to manifest files. +# Keeping it here hard coded for now. +# The pages to be skipped for HASH and PBC +# Pages: 0x80 to 0x9f - starting PFM region until end of pfm +# Pages: 0x2a00 to 0x7FFF - starting RC-image until end of flash +EXCLUDE_PAGES =[[0x80, 0x9f],[0x2a00,0x7fff]] + +# SPI PFM globals +PFM_OFFSET = 0x80000 +PFM_SPI = 0x1 +PFM_I2C = 0x2 +PFM_DEF_SIZE = 32 # 32 bytes of PFM header +PFM_SPI_SIZE_DEF = 16 # 16 bytes of SPI PFM +PFM_I2C_SIZE = 40 # 40 bytes of i2c rules region in PFM +PAGE_SIZE = 0x1000 # 4KB size of page + +def load_manifest(fname): + manifest = {} + with open(fname, 'r') as fd: + manifest = json.load(fd) + return manifest + +class pfm_spi(object): + + def __init__(self, prot_mask, start_addr, end_addr, hash, hash_pres): + self.spi_pfm = PFM_SPI + self.spi_prot_mask = prot_mask + self.spi_hash_pres = hash_pres + print("hash_pres={}".format(self.spi_hash_pres)) + print("spi_hash={}".format(hash)) + print("spi_start_addr={}".format(start_addr)) + print("spi_end_addr={}".format(end_addr)) + if hash_pres != 0: + self.spi_hash = hash + self.spi_pfm_rsvd = 0xffffffff # b'\xff'*4 + self.spi_start_addr = start_addr + self.spi_end_addr = end_addr + +class pfm_i2c(object): + + def __init__(self, bus_id, rule_id, address, cmd_map): + self.i2c_pfm = PFM_I2C + self.i2c_pfm_rsvd = 0xffffffff # b'\xff'*4 + self.i2c_bus_id = bus_id + self.i2c_rule_id = rule_id + self.i2c_address = address + self.i2c_cmd_whitelist = cmd_map + +class pfr_bmc_image(object): + +# json_file, firmware_file + def __init__(self, manifest, firmware_file, build_ver, build_num, build_hash, sha, output_filename): + + self.manifest = load_manifest(manifest) + self.firmware_file = firmware_file + self.build_version = build_ver + self.build_number = build_num + self.build_hash = build_hash + self.sha = sha + if self.sha == "2": + self.sha_version = 0x2 + self.pfm_spi_size_hash = 48 + if self.sha == "1": + self.pfm_spi_size_hash = 32 + self.sha_version = 0x1 + self.pfr_rom_file = output_filename + open(self.pfr_rom_file, 'a').close() + + self.page_size = PAGE_SIZE + self.empty = b'\xff' * self.page_size + + self.image_parts = [] + for p in self.manifest['image-parts']: + # the json should have in the order- filename, index, offset, size and protection byte + self.image_parts.append((p['name'], p['index'], p['offset'], p['size'], p['prot_mask'], p['pfm'], p['hash'], p['compress'])) + if self.sha == "1": + self.act_dgst = hashlib.sha256() + if self.sha == "2": + self.act_dgst = hashlib.sha384() + # SPI regions PFM array + self.pfm_spi_regions = [] + self.pfm_bytes = PFM_DEF_SIZE # PFM definition bytes (SPI regions + SMBUS) + + # hash, erase and compression bit maps for 128MB + self.pbc_erase_bitmap = bytearray(4096) + self.pbc_comp_bitmap = bytearray(4096) + + self.pbc_comp_payload = 0 + self.sec_rev = 1 + + # fill in the calculated data + self.hash_and_map() + + self.i2c_rules = [] + for i in self.manifest['i2c-rules']: + # the json should have in the order- bus-id, rule-id, address, size and cmd-whitelist + self.i2c_rules.append((i['bus-id'], i['rule-id'], i['address'], i['cmd-whitelist'])) + + # I2C rules PFM array + self.pfm_i2c_rules = [] + + # Generate the i2c rules + self.build_i2c_rules() + + # Generate PFM region binary - pfm.bin + self.build_pfm() + print("PFM build done") + + # Generate PBC region - pbc.bin + self.pbc_hdr() + print("PBC build done") + + def hash_compress_regions(self, p, upd): + + # JSON format as below + # 0. "name": <image region name> + # 1. "index": 1, + # 2. "offset": <start addr>, + # 3. "size": <size of the region>, + # 4. "prot_mask": <PFR protection mask>, + # 5. "pfm": <1|0 -add in PFM or not>, + # 6. "hash": <hashing of the region needed>, + # 7. "compress": <region to be compressed> + + image_name = p[0] + start_addr = int(p[2],16) #image part start address + size = int(p[3],16) #size of the image part + pfm_prot_mask = p[4] # pfm protection mask + pfm_flag = p[5] # pfm needed? + hash_flag = p[6] #to be hashed? + compress = p[7] #compress flag + index = p[1] # image part index + # 1 page is 4KB + page = start_addr >> 12 + + with open(self.firmware_file, "rb") as f: + f.seek(start_addr) + skip = False + + if hash_flag == 1: + if self.sha == "1": + hash_dgst = hashlib.sha256() + if self.sha == "2": + hash_dgst = hashlib.sha384() + for chunk in iter(lambda: f.read(self.page_size), b''): + chunk_len = len(chunk) + if chunk_len != self.page_size: + chunk = b''.join([chunk, b'\xff' * (self.page_size - chunk_len)]) + + for p in EXCLUDE_PAGES: + if (page >= p[0]) and (page <= p[1]): + #print("Exclude page={}".format(page)) + skip = True + break + + if not skip: + # add to the hash + if hash_flag == 1: + # HASH for the region + self.act_dgst.update(chunk) + hash_dgst.update(chunk) + + if compress == 1: + self.pbc_erase_bitmap[page >> 3] |= 1 << (7- (page % 8)) # Big endian bit map + # add to the pbc map + if chunk != self.empty: + #print("compressed page ={}".format(page)) + upd.write(chunk) + self.pbc_comp_bitmap[page >> 3] |= 1 << (7- (page % 8)) # Big Endian bit map + self.pbc_comp_payload += chunk_len # compressed payload bytes + + page += 1 + + if (page * self.page_size) >= (size + start_addr): + break + + if pfm_flag == 1: + self.pfm_bytes += PFM_SPI_SIZE_DEF + + hash = bytearray(self.pfm_spi_size_hash) + hash_pres = 0 + + if hash_flag == 1: + # region's hash + hash = hash_dgst.hexdigest() + hash_pres = self.sha_version + self.pfm_bytes += self.pfm_spi_size_hash + # append to SPI regions in PFM + self.pfm_spi_regions.append(pfm_spi(pfm_prot_mask, start_addr, (start_addr+size), hash, hash_pres)) + + def add_i2c_rules(self, i): + bus_id = i[0] # I2C Bus number + rule_id = i[1] # I2C rule number + addr = i[2] # I2C device address + cmds = i[3] # I2C white listed commands for which i2c write to be allowed + whitelist_map = bytearray(32) + + self.pfm_bytes += PFM_I2C_SIZE # add upto PFM size + + for c in cmds: + if c == "all": + for i in range(32): + whitelist_map[i] = 0xff + break + else: + idx = int(c,16) // 8 # index in the 32 bytes of white list i2c cmds + bit = int(c,16) % 8 # bit position to set + whitelist_map[idx] |= (1 << bit) + + # append to I2C rules in PFM + self.pfm_i2c_rules.append(pfm_i2c(bus_id, rule_id, addr, whitelist_map)) + + def build_i2c_rules(self): + for i in self.i2c_rules: + self.add_i2c_rules(i) + + def hash_and_map(self): + + # have copy of the update file for appending with PFR meta and compression + copyfile(self.firmware_file, self.pfr_rom_file) + with open("bmc_compressed.bin", "wb+") as upd: + for p in self.image_parts: + #filename, index, offset, size, protection. + print(p[0], p[1], p[2], p[3], p[4]) + self.hash_compress_regions(p, upd) + + def pbc_hdr(self): + ''' + typedef struct { + uint8_t tag[4]; /* PBC tag */ + uint32_t version; /* PBC Version- 0x0000_0002 */ + uint32_t page_size; /* NOR Flash page size = 0x0000_1000 */ + uint32_t pattern_size; /* 0xFF as pattern 1byte = 0x0000_0001 */ + uint32_t pattern; /* 0xFF pattern = 0x0000_00FF */ + uint32_t bitmap_size; /* 32768 pages for 128MB- 0x0000_8000 */ + uint32_t payload_length /* payload */ + uint8_t reserved[100]; /* Reserved 100bytes */ + uint8_t erase_bitmap[4096]; /* erase bit map for 32768 pages */ + uint8_t comp_bitmap[4096]; /* compression bit map for 32768 pages */ + uint8_t comp_payload; /* compressed payload */ + ''' + names = [ + 'tag', 'pbc_ver', 'page_sz', 'pattern_sz', 'pattern', 'bitmap_sz', + 'payload_size', 'resvd0', 'erase_bitmap', 'comp_bitmap', + ] + parts = { + 'tag': b'CBP_', + 'pbc_ver': struct.pack('<i',0x00000002), + 'page_sz': struct.pack('<i',0x00001000), + 'pattern_sz': struct.pack('<i',0x00000001), + 'pattern': struct.pack('<i',0x000000FF), + 'bitmap_sz': struct.pack('<i',0x00008000), + 'payload_size': struct.pack('<i',self.pbc_comp_payload), + 'resvd0' : b'\x00'*100, + 'erase_bitmap': bytes(self.pbc_erase_bitmap), + 'comp_bitmap': bytes(self.pbc_comp_bitmap), + } + + with open("pbc.bin", "wb+") as pbf: + pbf.write(b''.join([parts[n] for n in names])) + pbf.seek(0) # rewind to beginning of PBC file + self.act_dgst.update(pbf.read()) # add up PBC data for hashing + + def build_pfm(self): + ''' + typedef struct { + uint32_t tag; /* PFM_HDR_TAG above, no terminating null */ + uint8_t SVN; /* SVN- security revision of associated image data */ + uint8_t bkc; /* bkc */ + uint8_t pfm_ver_major; /* PFM revision */ + uint8_t pfm_ver_minor; + uint8_t reserved0[4]; + uint8_t build_num; + uint8_t build_hash[3]; + uint8_t reserved1[12]; /* reserved */ + uint32_t pfm_length; /* PFM size in bytes */ + pfm_spi pfm_spi[2]; /* PFM SPI regions - u-boot & fit-image */ + pfm_smbus pfm_smbus[4]; /* defined smbus rules for PSUs and HSBP */ + } __attribute__((packed)) pfm_hdr; + ''' + names = [ + 'tag', 'sec_rev', 'bkc', 'pfm_ver_major', 'pfm_ver_minor', 'resvd0', 'build_num', 'build_hash1', 'build_hash2', 'build_hash3', 'resvd1', 'pfm_len', + ] + parts = { + 'tag': struct.pack("<I", 0x02b3ce1d), + 'sec_rev': struct.pack('<B', self.sec_rev), + 'bkc': struct.pack('<B', 0x01), + 'pfm_ver_major': struct.pack('<B', ((int(self.build_version) >> 8) & 0xff)), + 'pfm_ver_minor': struct.pack('<B', (int(self.build_version) & 0x00ff)), + 'resvd0': b'\xff'* 4, + 'build_num': struct.pack('<B', int(self.build_number,16)), + 'build_hash1': struct.pack('<B', (int(self.build_hash) & 0xff)), + 'build_hash2': struct.pack('<B', ((int(self.build_hash) >> 8) & 0xff)), + 'build_hash3': struct.pack('<B', ((int(self.build_hash) >> 16) & 0xff)), + 'resvd1': b'\xff'* 12, + 'pfm_len': '' + } + + # PFM should be 128bytes aligned, find the padding bytes + padding_bytes = 0 + if (self.pfm_bytes % 128) != 0: + padding_bytes = 128 - (self.pfm_bytes % 128) + + print("padding={}".format(padding_bytes)) + print("PFM size1={}".format(self.pfm_bytes)) + self.pfm_bytes += padding_bytes + parts['pfm_len'] = struct.pack('<I', self.pfm_bytes) + print("PFM size2={}".format(self.pfm_bytes)) + + with open("pfm.bin", "wb+") as f: + f.write(b''.join([parts[n] for n in names])) + for i in self.pfm_spi_regions: + f.write(struct.pack('<B', int(i.spi_pfm))) + f.write(struct.pack('<B', int(i.spi_prot_mask))) + f.write(struct.pack('<h', int(i.spi_hash_pres))) + f.write(struct.pack('<I', int(i.spi_pfm_rsvd))) + f.write(struct.pack('<I', int(i.spi_start_addr))) + f.write(struct.pack('<I', int(i.spi_end_addr))) + + if i.spi_hash_pres != 0: + f.write(bytearray.fromhex(i.spi_hash)) + + for r in self.pfm_i2c_rules: + f.write(struct.pack('<B', int(r.i2c_pfm))) + f.write(struct.pack('<I', int(r.i2c_pfm_rsvd))) + f.write(struct.pack('<B', int(r.i2c_bus_id))) + f.write(struct.pack('<B', int(r.i2c_rule_id))) + f.write(struct.pack('<B', int(r.i2c_address, 16))) + f.write(r.i2c_cmd_whitelist) + + # write the padding bytes at the end + f.write(b'\xff' * padding_bytes) + +def usage(prog): + sys.stderr.write(prog + + " -m manifest -i rom-image -n build_version -b build_number -h build_hash -s sha -o output_file_name\n") + +def main(): + try: + opts, args = getopt.getopt(sys.argv[1:], "m:i:n:b:h:s:o:", + ["manifest=", "image=", "build_version=","build_number=","build_hash=","sha=", "output_file_name="]) + except getopt.GetoptError as err: + sys.stderr.write(str(err) + "\n") + sys.exit(2) + json_file = None + firmware_file = None + build_ver = None + build_num = None + build_hash = None + sha = None + output_filename = None + + for o, a in opts: + if o in ("-m", "--manifest"): + json_file = a + elif o in ("-i", "--image"): + firmware_file = a + elif o in ("-n", "--build_version"): + build_ver = a + elif o in ("-b", "--build_number"): + build_num = a + elif o in ("-h", "--build_hash"): + build_hash = a + elif o in ("-s", "--sha"): + sha = a + elif o in ("-o", "--output_file_name"): + output_filename = a + else: + usage(sys.argv[0]) + assert False, "unhandled argument: " + o + + if json_file is None or firmware_file is None or build_ver is None or build_num is None or build_hash is None or sha is None or output_filename is None: + usage(sys.argv[0]) + sys.exit(-1) + + print("manifest: %s" % json_file) + print("image: %s" % firmware_file) + print("build_ver: %s" % build_ver) + print("build_number: %s" % build_num) + print("build_hash: %s" % build_hash) + print("Sha: %s" % sha) + print("output_filename: %s" % output_filename) + + + # function to generate BMC PFM, PBC header and BMC compressed image + pfr_bmc_image(json_file, firmware_file, build_ver, build_num, build_hash, sha ,output_filename) + +if __name__ == '__main__': + main() diff --git a/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/intel-blocksign-native.bb b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/intel-blocksign-native.bb new file mode 100644 index 000000000..51c5fdf74 --- /dev/null +++ b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/intel-blocksign-native.bb @@ -0,0 +1,20 @@ +SUMMARY = "Intel Blocksign tool for PFR image" +DESCRIPTION = "Image signing tool for BMC PFR image" + +inherit cmake native + +LICENSE = "Apache-2.0" +LIC_FILES_CHKSUM = "file://${INTELBASE}/COPYING.apache-2.0;md5=34400b68072d710fecd0a2940a0d1658" + +DEPENDS = "openssl-native libxml2-native " + +SRC_URI = "git://git@github.com/Intel-BMC/blocksign;protocol=ssh" + +SRCREV = "966d16f680c1b14c338640d35a12d5e2f9a6937a" + +S = "${WORKDIR}/git" + +do_install:append() { + install -d ${D}/${bindir} + install -m 775 ${B}/blocksign ${D}/${bindir} +} diff --git a/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/obmc-intel-pfr-image-native.bb b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/obmc-intel-pfr-image-native.bb new file mode 100644 index 000000000..bb0f9ba7e --- /dev/null +++ b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/obmc-intel-pfr-image-native.bb @@ -0,0 +1,23 @@ +SUMMARY = "Intel PFR image manifest and image signing keys" +DESCRIPTION = "This copies PFR image generation scripts and image signing keys to staging area" + +PR = "r1" +LICENSE = "Apache-2.0" +LIC_FILES_CHKSUM = "file://${INTELBASE}/COPYING.apache-2.0;md5=34400b68072d710fecd0a2940a0d1658" + +inherit native + +DEPENDS += " intel-blocksign-native" + +SRC_URI = " \ + file://pfr_image.py \ + " + +do_install () { + bbplain "Copying intel pfr image generation scripts and image signing keys" + + install -d ${D}${bindir} + install -d ${D}/${datadir}/pfrconfig + install -m 775 ${WORKDIR}/pfr_image.py ${D}${bindir}/pfr_image.py +} + diff --git a/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/pfr-manager_%.bbappend b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/pfr-manager_%.bbappend new file mode 100644 index 000000000..020c8d53f --- /dev/null +++ b/meta-openbmc-mods/meta-common/recipes-intel/intel-pfr/pfr-manager_%.bbappend @@ -0,0 +1,5 @@ +# Enable downstream autobump +SRC_URI = "git://github.com/openbmc/pfr-manager" +SRCREV = "bcc7ce1f418c1a16a7868fee62499fa677242254" +DEPENDS += " libgpiod \ + " |