diff options
Diffstat (limited to 'meta-openembedded/meta-oe/recipes-extended/smartmontools/files')
3 files changed, 130 insertions, 0 deletions
diff --git a/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/initd.smartd b/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/initd.smartd new file mode 100755 index 000000000..54adcb406 --- /dev/null +++ b/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/initd.smartd @@ -0,0 +1,112 @@ +#! /bin/sh + +# smartmontools init file for smartd +# Copyright (C) 2002-8 Bruce Allen <smartmontools-support@lists.sourceforge.net> +# $Id: smartd.initd.in 3360 2011-06-06 19:25:36Z chrfranke $ + +# For RedHat and cousins: +# chkconfig: - 60 60 +# description: Self Monitoring and Reporting Technology (SMART) Daemon +# processname: smartd + +# For SuSE and cousins +### BEGIN INIT INFO +# Provides: smartd +# Required-Start: $syslog $remote_fs +# Should-Start: sendmail +# Required-Stop: $syslog $remote_fs +# Should-Stop: sendmail +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Monitors disk and tape health via S.M.A.R.T. +# Description: Start S.M.A.R.T. disk and tape monitor. +### END INIT INFO + +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2, or (at your option) any later +# version. +# You should have received a copy of the GNU General Public License (for +# example COPYING); if not, write to the Free Software Foundation, Inc., 675 +# Mass Ave, Cambridge, MA 02139, USA. +# This code was originally developed as a Senior Thesis by Michael Cornwell +# at the Concurrent Systems Laboratory (now part of the Storage Systems +# Research Center), Jack Baskin School of Engineering, University of +# California, Santa Cruz. http://ssrc.soe.ucsc.edu/. + +# Uncomment the line below to pass options to smartd on startup. +# Note that distribution specific configuration files like +# /etc/{default,sysconfig}/smartmontools might override these +#smartd_opts="--interval=1800" + +SMARTD_BIN=/usr/sbin/smartd +SMARTDPID=/var/run/smartd.pid +[ -x $SMARTD_BIN ] || exit 0 +RET=0 + +# source configuration file +[ -r /etc/default/rcS ] && . /etc/default/rcS +[ -r /etc/default/smartmontools ] && . /etc/default/smartmontools + +smartd_opts="--pidfile $SMARTDPID $smartd_opts" + +case "$1" in + start) + if [ "$start_smartd" != "yes" ]; then + [ "$VERBOSE" != "no" ] && echo "Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools" + exit 0 + fi + echo -n "Starting S.M.A.R.T. daemon: smartd" + if start-stop-daemon --start --quiet --pidfile $SMARTDPID \ + --exec $SMARTD_BIN -- $smartd_opts; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + stop) + echo -n "Stopping S.M.A.R.T. daemon: smartd" + start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID + echo "." + ;; + restart) + $0 stop + $0 start + ;; + force-reload) + $0 reload || $0 restart + ;; + reload) + echo -n "Reload S.M.A.R.T. daemon: smartd" + if start-stop-daemon --stop --quiet --signal 1 \ + --pidfile $SMARTDPID; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + report) + echo -n "Checking SMART devices now" + if start-stop-daemon --stop --quiet --signal 10 \ + --pidfile $SMARTDPID; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + status) + if pidof $SMARTD_BIN >/dev/null; then + echo "$SMARTD_BIN is running." + else + echo "$SMARTD_BIN is not running." + RET=1 + fi + ;; + *) + echo "Usage: $0 {start|stop|restart|force-reload|reload|report|status}" + exit 1 +esac +exit $RET diff --git a/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/smartd.service b/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/smartd.service new file mode 100644 index 000000000..f3db946c8 --- /dev/null +++ b/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/smartd.service @@ -0,0 +1,12 @@ +[Unit] +Description=Self Monitoring and Reporting Technology (SMART) Daemon +After=syslog.target + +[Service] +EnvironmentFile=-@SYSCONFDIR@/smartmontools +ExecStart=@SBINDIR@/smartd -n $smart_opts +ExecReload=@BASE_BINDIR@/kill -HUP $MAINPID +StandardOutput=syslog + +[Install] +WantedBy=multi-user.target diff --git a/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/smartmontools.default b/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/smartmontools.default new file mode 100644 index 000000000..602e00beb --- /dev/null +++ b/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/smartmontools.default @@ -0,0 +1,6 @@ +# uncomment to start smartd on system startup for SysV init script +# For systemd service file, use `systemctl enable smartd'. +#start_smartd=yes + +# uncomment to pass additional options to smartd on startup +#smartd_opts="--interval=1800" |