summaryrefslogtreecommitdiff
path: root/meta-phosphor/scripts/run-repotest.sh
diff options
context:
space:
mode:
Diffstat (limited to 'meta-phosphor/scripts/run-repotest.sh')
-rwxr-xr-xmeta-phosphor/scripts/run-repotest.sh86
1 files changed, 0 insertions, 86 deletions
diff --git a/meta-phosphor/scripts/run-repotest.sh b/meta-phosphor/scripts/run-repotest.sh
deleted file mode 100755
index bd82176d3..000000000
--- a/meta-phosphor/scripts/run-repotest.sh
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/bash -e
-#
-
-script_dir="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
-obmc_dir=${script_dir}/../../
-
-# openbmc doesn't control what upstream poky, or any of the other layers do,
-# which do use patches as part of their upstreaming process.
-# meta-phosphor is also included such that patches that the community agrees to
-# hold onto will be allowed in that layer.
-
-patch_files_tmp=$(mktemp)
-allowed_patches_tmp=$(mktemp)
-
-git -C "$obmc_dir" ls-files -- \
- '*.patch' \
- ':!:poky/**' \
- ':!:meta-security/**' \
- ':!:meta-xilinx/**' \
- ':!:meta-raspberrypi/**' \
- ':!:meta-openembedded/**' \
- ':!:meta-phosphor/**' \
- | sort > $patch_files_tmp
-
-
-# The following patches were present on master at the time this test was
-# written. Their presence in this list should not be acknowlegement that they
-# are now allowed, but ignoring them is required in the intermediate time
-# between when this test was created, and when the maintainers of these repos
-# clean them up.
-#
-# https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md
-echo "\
-meta-amd/meta-ethanolx/recipes-x86/chassis/x86-power-control/0001-Amd-power-control-modifications-for-EthanolX.patch
-meta-ampere/meta-common/recipes-devtools/mtd/mtd-utils/0001-flashcp-support-offset-option.patch
-meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0001-aspeed-scu-Switch-PWM-pin-to-GPIO-input-mode.patch
-meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0002-aspeed-Disable-internal-PD-resistors-for-GPIOs.patch
-meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0003-aspeed-support-passing-system-reset-status-to-kernel.patch
-meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0004-aspeed-add-gpio-support.patch
-meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0005-aspeed-Enable-SPI-master-mode.patch
-meta-ampere/meta-jade/recipes-bsp/u-boot/u-boot-aspeed/0006-aspeed-support-Mt.Jade-platform-init.patch
-meta-aspeed/recipes-bsp/u-boot/files/default-gcc.patch
-meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0001-bytedance-g220a-Enable-ipmb.patch
-meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0003-misc-aspeed-Add-Aspeed-UART-routing-control-driver.patch
-meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0004-ARM-dts-aspeed-Add-uart-routing-node.patch
-meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0005-ARM-dts-aspeed-Enable-g220a-uart-route.patch
-meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-node-manager-proxy/0001-Remove-Total_Power-sensor.patch
-meta-facebook/meta-bletchley/recipes-bsp/u-boot/u-boot-aspeed-sdk/0001-u-boot-ast2600-57600-baudrate-for-bletchley.patch
-meta-facebook/meta-tiogapass/recipes-bsp/u-boot/u-boot-aspeed/0001-configs-ast-common-use-57600-baud-rate-to-match-Tiog.patch
-meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0001-board-aspeed-Add-Mux-for-yosemitev2.patch
-meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-spl-host-console-handle.patch
-meta-google/dynamic-layers/nuvoton-layer/recipes-bsp/images/npcm7xx-igps/0001-Set-FIU0_DRD_CFG-and-FIU_Clk_divider-for-gbmc-hoth.patch
-meta-google/recipes-extended/libconfig/files/0001-conf2struct-Use-the-right-perl.patch
-meta-google/recipes-extended/libconfig/files/0001-makefile-Add-missing-LDFLAGS.patch
-meta-google/recipes-phosphor/initrdscripts/obmc-phosphor-initfs/rwfs-clean-dev.patch
-meta-ingrasys/meta-zaius/recipes-bsp/u-boot/u-boot-aspeed/0001-board-aspeed-Add-reset_phy-for-Zaius.patch
-meta-nuvoton/recipes-bsp/images/npcm7xx-igps/0001-Adjust-paths-for-use-with-Bitbake.patch
-meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0001-Add-system-reset-status-support.patch
-meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0002-config-ast-common-set-fieldmode-to-true.patch
-meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0003-aspeed-add-gpio-support.patch
-meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0004-aspeed-add-bmc-position-support.patch
-meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/0001-Add-NCSI-channel-selector.patch
-meta-yadro/meta-nicole/recipes-phosphor/host/op-proc-control/0001-Stop-and-send-SRESET-for-one-thread-only.patch
-meta-yadro/recipes-phosphor/dbus/phosphor-dbus-interfaces/0001-Add-boot-initiator-mailbox-interface.patch
-meta-yadro/recipes-phosphor/ipmi/phosphor-ipmi-host/0001-Add-support-for-persistent-only-settings.patch
-meta-yadro/recipes-phosphor/ipmi/phosphor-ipmi-host/0002-Add-support-for-boot-initiator-mailbox.patch
-meta-yadro/recipes-phosphor/ipmi/phosphor-ipmi-host/0003-Fix-version-parsing-update-AUX-revision-info.patch
-" | sort > $allowed_patches_tmp
-
-
-
-files_diff=$(comm -23 $patch_files_tmp $allowed_patches_tmp)
-rm $allowed_patches_tmp
-rm $patch_files_tmp
-
-files_count=$(echo -n "$files_diff" | grep -c '^' || true)
-if [[ $files_count -ne 0 ]]; then
- echo "Patch files found not in allow list"
- echo "$files_diff"
- echo "Patches are not allowed on OpenBMC in these layers. Please upstream your changes and see \
- https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md"
- exit 1
-fi
-
-echo "Repo test passed"
-