diff options
Diffstat (limited to 'meta-raspberrypi/README.md')
-rw-r--r-- | meta-raspberrypi/README.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/meta-raspberrypi/README.md b/meta-raspberrypi/README.md index 6c4e1e44e..898426d8f 100644 --- a/meta-raspberrypi/README.md +++ b/meta-raspberrypi/README.md @@ -50,15 +50,15 @@ This layer depends on: 2. Add this layer to bblayers.conf and the dependencies above 3. Set MACHINE in local.conf to one of the supported boards 4. bitbake core-image-base -5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used) -6. Boot your RPI. +5. Use bmaptool to copy the generated .wic.bz2 file to the SD card +6. Boot your RPI ## Quick Start with kas 1. Install kas build tool from PyPi (sudo pip3 install kas) 2. kas build meta-raspberrypi/kas-poky-rpi.yml -3. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used) -4. Boot your RPI. +3. Use bmaptool to copy the generated .wic.bz2 file to the SD card +4. Boot your RPI To adjust the build configuration with specific options (I2C, SPI, ...), simply add a section as follows: |