diff options
Diffstat (limited to 'meta-xilinx/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf')
-rw-r--r-- | meta-xilinx/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf | 41 |
1 files changed, 24 insertions, 17 deletions
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf index 741ef5de6..10b5e29c9 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf @@ -9,43 +9,50 @@ # For the FSBL 'zynq_fsbl_0.elf' refer to UG873 and the associated design files. # -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/soc-zynq.inc require conf/machine/include/machine-xilinx-default.inc require conf/machine/include/machine-xilinx-qemu.inc MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost usbgadget" # u-boot configuration -UBOOT_MACHINE = "zynq_zc706_config" +UBOOT_MACHINE = "xilinx_zynq_virt_defconfig" SPL_BINARY ?= "spl/boot.bin" EXTRA_IMAGEDEPENDS += " \ u-boot-zynq-uenv \ virtual/boot-bin \ virtual/bootloader \ + u-boot-zynq-scr \ " -SERIAL_CONSOLE = "115200 ttyPS0" +SERIAL_CONSOLES ?= "115200;ttyPS0" KERNEL_DEVICETREE = "zynq-zc706.dtb" IMAGE_BOOT_FILES += " \ boot.bin \ uEnv.txt \ + boot.scr \ " -# Although not fully supported you can run this machine on the mainline QEMU 'xilinx-zynq-a9' machine -IMAGE_CLASSES += "qemuboot" QB_MEM = "-m 1024" -QB_MACHINE = "-machine xilinx-zynq-a9" -QB_OPT_APPEND = "-nographic -serial null -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - -# Xilinx's fork of QEMU has much better results, so let's default to that -# Use qemu-xilinx instead of mainline -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - -IMAGE_CLASSES += "qemuboot-xilinx" +QB_NETWORK_DEVICE = "-net nic,netdev=eth0 -netdev user,id=eth0,tftp=/tftpboot -net nic" +QB_DEFAULT_KERNEL_qemuboot-xilinx = "zImage" + +QB_SYSTEM_NAME ?= "${@qemu_target_binary(d)}" +QB_DEFAULT_FSTYPE = "cpio.gz.u-boot" +QB_DTB = "system.dtb" +QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" + +# Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW) +QB_OPT_APPEND = " \ + -nographic -serial null -serial mon:stdio \ + -initrd ${DEPLOY_DIR_IMAGE}/petalinux-image-minimal-zc706-zynq7.cpio.gz.u-boot \ + -gdb tcp::9000 \ + -device loader,addr=0xf8000008,data=0xDF0D,data-len=4 \ + -device loader,addr=0xf8000140,data=0x00500801,data-len=4 \ + -device loader,addr=0xf800012c,data=0x1ed044d,data-len=4 \ + -device loader,addr=0xf8000108,data=0x0001e008,data-len=4 \ + -device loader,addr=0xF8000910,data=0xF,data-len=0x4 \ + " |