diff options
Diffstat (limited to 'meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf')
| -rw-r--r-- | meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf | 77 |
1 files changed, 72 insertions, 5 deletions
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf index 98385d251..7aa01986e 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf @@ -1,15 +1,82 @@ #@TYPE: Machine -#@NAME: +#@NAME: Generic zynqmp #@DESCRIPTION: zynqmp devices -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc +# CG is the lowest common demoninator, so use this by default +SOC_VARIANT ?= "cg" + +require conf/machine/include/soc-zynqmp.inc require conf/machine/include/machine-xilinx-default.inc require conf/machine/include/machine-xilinx-qemu.inc MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" +UBOOT_MACHINE = "xilinx_zynqmp_virt_defconfig" +SPL_BINARY ?= "spl/boot.bin" + +# Default SD image build onfiguration, use qemu-sd to pad +IMAGE_CLASSES += "image-types-xilinx-qemu" +IMAGE_FSTYPES += "wic.qemu-sd" +WKS_FILES ?= "sdimage-bootpart.wks" + +SERIAL_CONSOLES ?= "115200;ttyPS0" + +# We need a generic one that works with QEMU... +HDF_MACHINE = "zcu102-zynqmp" +KERNEL_DEVICETREE = "xilinx/zynqmp-zcu102-rev1.0.dtb" + +EXTRA_IMAGEDEPENDS += " \ + u-boot-zynq-uenv \ + arm-trusted-firmware \ + qemu-devicetrees \ + virtual/boot-bin \ + virtual/bootloader \ + u-boot-zynq-scr \ + " + +IMAGE_BOOT_FILES += " \ + uEnv.txt \ + atf-uboot.ub \ + ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/dtb', 'device-tree', 'system.dtb', '', d)} \ + boot.scr \ + " + +# This machine has a QEMU model, runqemu setup: +QB_MACHINE = "-machine xlnx-zcu102" +QB_MEM = "-m 4096" +QB_OPT_APPEND ?= "-nographic -serial mon:stdio -serial null" +QB_NETWORK_DEVICE = "-net nic -net nic -net nic -net nic,netdev=net0,macaddr=@MAC@" + +# Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW) +QB_OPT_APPEND_append_qemuboot-xilinx = " \ + -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zcu102-arm.dtb \ + ${@qemu_zynqmp_unhalt(d, True)} \ + -device loader,file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware.elf,cpu-num=0 \ + -device loader,file=${DEPLOY_DIR_IMAGE}/u-boot.elf \ + -device loader,file=${DEPLOY_DIR_IMAGE}/system.dtb,addr=0x100000 \ + " + +# Attach the rootfs disk image to the second SD interface of QEMU (which is SD0) +QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd" +QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5" +QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" + +# PMU instance args +PMU_ROM ?= "${DEPLOY_DIR_IMAGE}/pmu-rom.elf" +PMU_FIRMWARE_DEPLOY_DIR ?= "${@ '${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu' if d.getVar('BMULTICONFIG') == 'pmu' else '${TOPDIR}/tmp/deploy/images/${MACHINE}'}" +PMU_FIRMWARE_IMAGE_NAME ?= "${@ 'pmu-firmware-zynqmp-pmu' if d.getVar('BBMULTICONFIG') == 'pmu' else 'pmu-${MACHINE}'}" + +QB_PMU_OPT = " \ + -M microblaze-fdt \ + -display none \ + -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zynqmp-pmu.dtb \ + -kernel ${PMU_ROM} \ + -device loader,file=${PMU_FIRMWARE_DEPLOY_DIR}/${PMU_FIRMWARE_IMAGE_NAME}.elf \ + -device loader,addr=0xfd1a0074,data=0x1011003,data-len=4 \ + -device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4 \ + " +QB_OPT_APPEND_append_qemuboot-xilinx = " -pmu-args '${QB_PMU_OPT}'" + +do_write_qemuboot_conf[depends] += "u-boot-zynq-uenv:do_deploy" |