diff options
Diffstat (limited to 'meta-xilinx/meta-xilinx-bsp/conf/machine')
17 files changed, 228 insertions, 2 deletions
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc b/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc index 153a47fba..1367e57ab 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc @@ -23,7 +23,9 @@ UBOOT_SUFFIX_microblaze ?= "bin" UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}" UBOOT_ELF ?= "u-boot" +UBOOT_ELF_zynq ?= "u-boot.elf" UBOOT_ELF_aarch64 ?= "u-boot.elf" +UBOOT_ELF_versal ?= "u-boot.elf" #Hardware accelaration PREFERRED_PROVIDER_virtual/libgles1_mali400 = "libmali-xlnx" @@ -32,6 +34,11 @@ PREFERRED_PROVIDER_virtual/egl_mali400 = "libmali-xlnx" PREFERRED_PROVIDER_virtual/libgl_mali400 = "mesa-gl" PREFERRED_PROVIDER_virtual/mesa_mali400 = "mesa-gl" +# microblaze does not get on with pie for reasons not looked into as yet +GCCPIE_microblaze = "" +GLIBCPIE_microblaze = "" +SECURITY_CFLAGS_microblaze = "" +SECURITY_LDFLAGS_microblaze = "" XSERVER ?= " \ xserver-xorg \ @@ -77,3 +84,4 @@ XSERVER_EXT_zynqmp ?= "xf86-video-armsoc" # For MicroBlaze default all microblaze machines to use GDB 7.7.1 (for gdbserver/gdb) PREFERRED_VERSION_gdb_microblaze = "7.7.1" +FPGA_MNGR_RECONFIG_ENABLE ?= "${@bb.utils.contains('IMAGE_FEATURES', 'fpga-manager', '1', '0', d)}" diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc b/meta-xilinx/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc index 270e2d937..f7006026a 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc @@ -12,6 +12,7 @@ require conf/machine/include/soc-family.inc # Linux Configuration KERNEL_IMAGETYPE ?= "uImage" +KERNEL_IMAGETYPES += "zImage" # Set default load address. # Override with KERNEL_EXTRA_ARGS_<board> += "..." in machine file if required diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf index 73ff40fdd..d79e4efd9 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf @@ -6,7 +6,7 @@ require conf/machine/include/tune-microblaze.inc require conf/machine/include/machine-xilinx-default.inc -TUNE_FEATURES_tune-microblaze += "v10.0 barrel-shift reorder pattern-compare multiply-high divide-hard" +TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift reorder pattern-compare multiply-high divide-hard" MACHINE_FEATURES = "" diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf new file mode 100644 index 000000000..00aede111 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf @@ -0,0 +1,17 @@ +#@TYPE: Machine +#@NAME: microblazeel-v11.0-bs-cmp-mh-div-generic +#@DESCRIPTION: microblazeel-v11.0-bs-cmp-mh-div + +require conf/machine/include/tune-microblaze.inc +require conf/machine/include/machine-xilinx-default.inc + +TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift pattern-compare reorder divide-hard multiply-high" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "linux.bin.ub" +KERNEL_IMAGETYPES = "" + +SERIAL_CONSOLE = "115200 ttyS0" + +EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf new file mode 100644 index 000000000..30afbd71b --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf @@ -0,0 +1,17 @@ +#@TYPE: Machine +#@NAME: microblazeel-v11.0-bs-cmp-ml-generic +#@DESCRIPTION: microblazeel-v11.0-bs-cmp-ml + +require conf/machine/include/tune-microblaze.inc +require conf/machine/include/machine-xilinx-default.inc + +TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift reorder pattern-compare multiply-low" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "linux.bin.ub" +KERNEL_IMAGETYPES = "" + +SERIAL_CONSOLE = "115200 ttyS0" + +EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf index 8869424dc..83c5fc1e5 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf @@ -14,6 +14,7 @@ MACHINE_FEATURES = "ext2 vfat usbhost" PREFERRED_PROVIDER_virtual/bootloader = "u-boot" UBOOT_MACHINE = "zynq_microzed_config" SPL_BINARY ?= "spl/boot.bin" +UBOOT_ELF_zynq = "u-boot" EXTRA_IMAGEDEPENDS += " \ u-boot-zynq-uenv \ diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf index 911bf90ed..c229dac65 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf @@ -18,6 +18,7 @@ MACHINE_FEATURES = "ext2 vfat usbhost usbgadget" PREFERRED_PROVIDER_virtual/bootloader = "u-boot" UBOOT_MACHINE = "zynq_picozed_config" SPL_BINARY ?= "spl/boot.bin" +UBOOT_ELF_zynq = "u-boot" EXTRA_IMAGEDEPENDS += " \ u-boot-zynq-uenv \ diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf new file mode 100644 index 000000000..51dd2a9d5 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: zc1254-zynqmp +#@DESCRIPTION: Machine support for ZC1254 Evaluation Board. +# + +SOC_VARIANT ?= "dr" + +require conf/machine/include/tune-zynqmp.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" + +UBOOT_MACHINE = "xilinx_zynqmp_zc1254_revA_defconfig" +SPL_BINARY ?= "spl/boot.bin" + +SERIAL_CONSOLE ?= "115200 ttyPS0" + +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" + +KERNEL_DEVICETREE = "xilinx/zynqmp-zc1254-revA.dtb" + +PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" +PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" + +PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" +PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" + +EXTRA_IMAGEDEPENDS += " \ + u-boot-zynq-uenv \ + arm-trusted-firmware \ + virtual/boot-bin \ + virtual/bootloader \ + " +IMAGE_BOOT_FILES += " \ + uEnv.txt \ + atf-uboot.ub \ + " diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zc1275-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc1275-zynqmp.conf new file mode 100644 index 000000000..1e5cd0d7a --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc1275-zynqmp.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: zc1275-zynqmp +#@DESCRIPTION: Machine support for ZC1275 Evaluation Board. +# + +SOC_VARIANT ?= "dr" + +require conf/machine/include/tune-zynqmp.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" + +UBOOT_MACHINE = "xilinx_zynqmp_zc1275_revB_defconfig" +SPL_BINARY ?= "spl/boot.bin" + +SERIAL_CONSOLE ?= "115200 ttyPS0" + +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" + +KERNEL_DEVICETREE = "xilinx/zynqmp-zc1275-revB.dtb" + +PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" +PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" + +PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" +PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" + +EXTRA_IMAGEDEPENDS += " \ + u-boot-zynq-uenv \ + arm-trusted-firmware \ + virtual/boot-bin \ + virtual/bootloader \ + " +IMAGE_BOOT_FILES += " \ + uEnv.txt \ + atf-uboot.ub \ + " diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf index fba55a3ee..281110d96 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf @@ -63,7 +63,7 @@ QB_OPT_APPEND_append_qemuboot-xilinx = " \ # Attach the rootfs disk image to the second SD interface of QEMU (which is SD0) QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd" -QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=3" +QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5" QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" # PMU instance args diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf new file mode 100644 index 000000000..068e48903 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: zcu111-zynqmp +#@DESCRIPTION: Machine support for ZCU111 Evaluation Board. +# + +SOC_VARIANT ?= "dr" + +require conf/machine/include/tune-zynqmp.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" + +UBOOT_MACHINE = "xilinx_zynqmp_zcu111_revA_defconfig" +SPL_BINARY ?= "spl/boot.bin" + +SERIAL_CONSOLE ?= "115200 ttyPS0" + +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" + +KERNEL_DEVICETREE = "xilinx/zynqmp-zcu111-revA.dtb" + +PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" +PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" + +PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" +PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" + +EXTRA_IMAGEDEPENDS += " \ + u-boot-zynq-uenv \ + arm-trusted-firmware \ + virtual/boot-bin \ + virtual/bootloader \ + " +IMAGE_BOOT_FILES += " \ + uEnv.txt \ + atf-uboot.ub \ + " diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf new file mode 100644 index 000000000..04508540d --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: zcu1285-zynqmp +#@DESCRIPTION: Machine support for ZCU1285 Evaluation Board. +# + +SOC_VARIANT ?= "dr" + +require conf/machine/include/tune-zynqmp.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" + +UBOOT_MACHINE = "xilinx_zynqmp_zc1275_revB_defconfig" +SPL_BINARY ?= "spl/boot.bin" + +SERIAL_CONSOLE ?= "115200 ttyPS0" + +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" + +KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1285-revA.dtb" + +PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" +PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" + +PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" +PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" + +EXTRA_IMAGEDEPENDS += " \ + u-boot-zynq-uenv \ + arm-trusted-firmware \ + virtual/boot-bin \ + virtual/bootloader \ + " +IMAGE_BOOT_FILES += " \ + uEnv.txt \ + atf-uboot.ub \ + " diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf index 36c51b70b..0b0a0de28 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf @@ -17,6 +17,7 @@ require conf/machine/include/machine-xilinx-default.inc # u-boot configuration UBOOT_MACHINE = "zynq_zed_config" SPL_BINARY ?= "spl/boot.bin" +UBOOT_ELF_zynq = "u-boot" EXTRA_IMAGEDEPENDS += " \ u-boot-zynq-uenv \ diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf index ba355d568..87634fcc2 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf @@ -22,6 +22,7 @@ MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" UBOOT_MACHINE = "zynq_zybo_config" SPL_BINARY ?= "spl/boot.bin" FORCE_PLATFORM_INIT = "1" +UBOOT_ELF_zynq = "u-boot" EXTRA_IMAGEDEPENDS += " \ u-boot-zynq-uenv \ diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf index 049add9cc..732fa9435 100644 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf @@ -18,6 +18,7 @@ MACHINE_FEATURES = "ext2 vfat usbhost usbgadget" PREFERRED_PROVIDER_virtual/bootloader = "u-boot" UBOOT_MACHINE = "zynq_zybo_config" SPL_BINARY ?= "spl/boot.bin" +UBOOT_ELF_zynq = "u-boot" EXTRA_IMAGEDEPENDS += " \ u-boot-zynq-uenv \ diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zynq-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynq-generic.conf new file mode 100644 index 000000000..12fd13881 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynq-generic.conf @@ -0,0 +1,11 @@ +#@TYPE: Machine +#@NAME: +#@DESCRIPTION: zynq devices + +require conf/machine/include/tune-zynq.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost usbgadget" + +EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf new file mode 100644 index 000000000..98385d251 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf @@ -0,0 +1,15 @@ +#@TYPE: Machine +#@NAME: +#@DESCRIPTION: zynqmp devices + +require conf/machine/include/tune-zynqmp.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc +require conf/machine/include/machine-xilinx-qemu.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" + +PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" + +EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" + |