diff options
Diffstat (limited to 'meta-xilinx/meta-xilinx-bsp/recipes-bsp')
16 files changed, 80 insertions, 1192 deletions
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc index 785f915ea..40a3d75d0 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc @@ -1,7 +1,7 @@ DESCRIPTION = "ARM Trusted Firmware" LICENSE = "BSD" -LIC_FILES_CHKSUM = "file://license.rst;md5=e927e02bca647e14efd87e9e914b2443" +LIC_FILES_CHKSUM = "file://license.rst;md5=1dd070c98a281d18d9eefd938729b031" PROVIDES = "virtual/arm-trusted-firmware" @@ -12,8 +12,10 @@ DEPENDS += "u-boot-mkimage-native" S = "${WORKDIR}/git" B = "${WORKDIR}/build" +SYSROOT_DIRS += "/boot" + XILINX_RELEASE_VERSION ?= "" -ATF_VERSION ?= "2.0" +ATF_VERSION ?= "2.2" ATF_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}" PV = "${ATF_VERSION}${ATF_VERSION_EXTENSION}+git${SRCPV}" @@ -45,14 +47,14 @@ ATF_CONSOLE ?= "" ATF_CONSOLE_zynqmp = "cadence" ATF_CONSOLE_versal ?= "pl011" -DEBUG ?= "" -DEBUG_versal ?= "1" +DEBUG_ATF ?= "" +DEBUG_ATF_versal ?= "1" EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_CONSOLE=${ATF_CONSOLE}' if d.getVar('ATF_CONSOLE', True) != '' else ''}" EXTRA_OEMAKE_append_versal = "${@' VERSAL_CONSOLE=${ATF_CONSOLE}' if d.getVar('ATF_CONSOLE', True) != '' else ''}" -EXTRA_OEMAKE_append = " ${@bb.utils.contains('DEBUG', '1', ' DEBUG=${DEBUG}', '', d)}" +EXTRA_OEMAKE_append = " ${@bb.utils.contains('DEBUG_ATF', '1', ' DEBUG=${DEBUG_ATF}', '', d)}" -OUTPUT_DIR = "${@bb.utils.contains('DEBUG', '1', '${B}/${PLATFORM}/debug', '${B}/${PLATFORM}/release', d)}" +OUTPUT_DIR = "${@bb.utils.contains('DEBUG_ATF', '1', '${B}/${PLATFORM}/debug', '${B}/${PLATFORM}/release', d)}" ATF_MEM_BASE ?= "" ATF_MEM_SIZE ?= "" @@ -62,6 +64,7 @@ EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_ATF_MEM_SIZE=${ATF_MEM_SIZE}' if d.get EXTRA_OEMAKE_append_versal = "${@' VERSAL_ATF_MEM_BASE=${ATF_MEM_BASE}' if d.getVar('ATF_MEM_BASE', True) != '' else ''}" EXTRA_OEMAKE_append_versal = "${@' VERSAL_ATF_MEM_SIZE=${ATF_MEM_SIZE}' if d.getVar('ATF_MEM_SIZE', True) != '' else ''}" +EXTRA_OEMAKE_append_vc-p-a2197-00-versal =" VERSAL_PLATFORM=silicon" do_configure() { oe_runmake clean -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM} @@ -72,7 +75,8 @@ do_compile() { } do_install() { - : + install -d ${D}/boot + install -Dm 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${D}/boot/${PN}-${SRCPV}.elf } do_deploy() { @@ -91,3 +95,4 @@ do_deploy() { ln -sf ${ATF_BASE_NAME}.ub ${DEPLOYDIR}/atf-uboot.ub } addtask deploy before do_build after do_compile +FILES_${PN} += "/boot/${PN}-${SRCPV}.elf" diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb deleted file mode 100644 index 64cbddc4e..000000000 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb +++ /dev/null @@ -1,7 +0,0 @@ -ATF_VERSION = "2.0" -XILINX_RELEASE_VERSION = "v2019.1" -BRANCH ?= "master" -SRCREV ?= "80d1c79007fda42d4cc0be31b185a1da5799cd4d" - -include arm-trusted-firmware.inc - diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2020.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2020.1.bb new file mode 100644 index 000000000..1d94c5183 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2020.1.bb @@ -0,0 +1,6 @@ +ATF_VERSION = "2.0" +BRANCH ?= "xlnx_rebase_v2.2" +SRCREV ?= "5918e656ef29dbdf234a6324ec85bc8a68eca113" + +include arm-trusted-firmware.inc + diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/bootgen/bootgen_1.0.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/bootgen/bootgen_1.0.bb new file mode 100644 index 000000000..4904a8e0f --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/bootgen/bootgen_1.0.bb @@ -0,0 +1,31 @@ +SUMMARY = "Building and installing bootgen" +DESCRIPTION = "Building and installing bootgen, a Xilinx tool that lets you stitch binary files together and generate device boot images" + +LICENSE = "Apache-2.0" +LIC_FILES_CHKSUM = "file://LICENSE;md5=be5410bcde8eb6481a6e5d3b22e0740b" + +S = "${WORKDIR}/git" + +DEPENDS += "openssl" +RDEPENDS_${PN} += "openssl" + +REPO ?= "git://github.com/Xilinx/bootgen.git;protocol=https" +BRANCH ?= "master" +SRCREV ?= "bb38995468d8c830cbbfc5062e903961444c0a3c" + +BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" +SRC_URI = "${REPO};${BRANCHARG}" + +EXTRA_OEMAKE += 'CROSS_COMPILER="${CXX}" -C ${S}' +CXXFLAGS_append = " -std=c++0x" + +TARGET_CC_ARCH += "${LDFLAGS}" + +do_install() { + install -d ${D}${bindir} + install -Dm 0755 ${S}/bootgen ${D}${bindir} +} + +FILES_${PN} = "${bindir}/bootgen" + +BBCLASSEXTEND = "native nativesdk" diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb index 81965c13c..0ecb3aa3c 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb @@ -11,6 +11,8 @@ LIC_FILES_CHKSUM = " \ inherit devicetree +DEPENDS += "python3-dtc-native" + PROVIDES = "virtual/dtb" # common zynq include diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2020.1.bb index 6a2ca7cc4..6a2ca7cc4 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2020.1.bb diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc index 737f5f91b..4b8c4efee 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc @@ -13,8 +13,8 @@ UBRANCHARG = "${@['nobranch=1', 'branch=${UBRANCH}'][d.getVar('UBRANCH', True) ! SRC_URI = "${UBOOTURI};${UBRANCHARG}" S = "${WORKDIR}/git" +B = "${WORKDIR}/build" FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot:" -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-xlnx:" -FILESEXTRAPATHS_prepend := "${@'${THISDIR}/u-boot-xlnx/${XILINX_RELEASE_VERSION}:' if d.getVar('XILINX_RELEASE_VERSION') else ''}" +SYSROOT_DIRS += "/boot" diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch deleted file mode 100644 index 7e25f87cc..000000000 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch +++ /dev/null @@ -1,1133 +0,0 @@ -From afe880f500cff7a9486379c5ad7a4f3379015a62 Mon Sep 17 00:00:00 2001 -From: Jaewon Lee <jaewon.lee@xilinx.com> -Date: Mon, 14 Jan 2019 11:30:56 -0800 -Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to - kc705-microblazeel - -This is an update to earlier kc705-trd patch done by Nathan Rossi. - -Change the microblaze-generic board to match the kc705-microblazeel. -This patch is not intended for upstream and serves as an intermediate -solution until OF support in upstream u-boot allows for easy support for -custom microblaze boards. - -Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> -Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> -Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific] ---- - arch/microblaze/dts/microblaze-generic.dts | 590 ++++++++++++++++++++++++++++- - board/xilinx/microblaze-generic/config.mk | 28 +- - configs/microblaze-generic_defconfig | 75 ++-- - include/configs/microblaze-generic.h | 348 ++++++++--------- - 4 files changed, 782 insertions(+), 259 deletions(-) - -diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts -index 08a1396..f8e616b 100644 ---- a/arch/microblaze/dts/microblaze-generic.dts -+++ b/arch/microblaze/dts/microblaze-generic.dts -@@ -1,9 +1,587 @@ - /dts-v1/; -+ - / { -- #address-cells = <1>; -- #size-cells = <1>; -- aliases { -- } ; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ compatible = "xlnx,microblaze"; -+ model = "Xilinx MicroBlaze"; -+ hard-reset-gpios = <0x1 0x0 0x1>; -+ -+ cpus { -+ #address-cells = <0x1>; -+ #cpus = <0x1>; -+ #size-cells = <0x0>; -+ -+ cpu@0 { -+ bus-handle = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clocks = <0x3>; -+ compatible = "xlnx,microblaze-10.0"; -+ d-cache-baseaddr = <0x80000000>; -+ d-cache-highaddr = <0xbfffffff>; -+ d-cache-line-size = <0x20>; -+ d-cache-size = <0x4000>; -+ device_type = "cpu"; -+ i-cache-baseaddr = <0x80000000>; -+ i-cache-highaddr = <0xbfffffff>; -+ i-cache-line-size = <0x10>; -+ i-cache-size = <0x4000>; -+ interrupt-handle = <0x4>; -+ model = "microblaze,10.0"; -+ timebase-frequency = <0xbebc200>; -+ xlnx,addr-size = <0x20>; -+ xlnx,addr-tag-bits = <0x10>; -+ xlnx,allow-dcache-wr = <0x1>; -+ xlnx,allow-icache-wr = <0x1>; -+ xlnx,area-optimized = <0x0>; -+ xlnx,async-interrupt = <0x1>; -+ xlnx,async-wakeup = <0x3>; -+ xlnx,avoid-primitives = <0x0>; -+ xlnx,base-vectors = <0x0>; -+ xlnx,branch-target-cache-size = <0x0>; -+ xlnx,cache-byte-size = <0x4000>; -+ xlnx,d-axi = <0x1>; -+ xlnx,d-lmb = <0x1>; -+ xlnx,d-lmb-mon = <0x0>; -+ xlnx,daddr-size = <0x20>; -+ xlnx,data-size = <0x20>; -+ xlnx,dc-axi-mon = <0x0>; -+ xlnx,dcache-addr-tag = <0x10>; -+ xlnx,dcache-always-used = <0x1>; -+ xlnx,dcache-byte-size = <0x4000>; -+ xlnx,dcache-data-width = <0x0>; -+ xlnx,dcache-force-tag-lutram = <0x0>; -+ xlnx,dcache-line-len = <0x8>; -+ xlnx,dcache-use-writeback = <0x0>; -+ xlnx,dcache-victims = <0x0>; -+ xlnx,debug-counter-width = <0x20>; -+ xlnx,debug-enabled = <0x1>; -+ xlnx,debug-event-counters = <0x5>; -+ xlnx,debug-external-trace = <0x0>; -+ xlnx,debug-interface = <0x0>; -+ xlnx,debug-latency-counters = <0x1>; -+ xlnx,debug-profile-size = <0x0>; -+ xlnx,debug-trace-async-reset = <0x0>; -+ xlnx,debug-trace-size = <0x2000>; -+ xlnx,div-zero-exception = <0x1>; -+ xlnx,dp-axi-mon = <0x0>; -+ xlnx,dynamic-bus-sizing = <0x0>; -+ xlnx,ecc-use-ce-exception = <0x0>; -+ xlnx,edge-is-positive = <0x1>; -+ xlnx,enable-discrete-ports = <0x0>; -+ xlnx,endianness = <0x1>; -+ xlnx,fault-tolerant = <0x0>; -+ xlnx,fpu-exception = <0x0>; -+ xlnx,freq = <0xbebc200>; -+ xlnx,fsl-exception = <0x0>; -+ xlnx,fsl-links = <0x0>; -+ xlnx,i-axi = <0x0>; -+ xlnx,i-lmb = <0x1>; -+ xlnx,i-lmb-mon = <0x0>; -+ xlnx,iaddr-size = <0x20>; -+ xlnx,ic-axi-mon = <0x0>; -+ xlnx,icache-always-used = <0x1>; -+ xlnx,icache-data-width = <0x0>; -+ xlnx,icache-force-tag-lutram = <0x0>; -+ xlnx,icache-line-len = <0x4>; -+ xlnx,icache-streams = <0x1>; -+ xlnx,icache-victims = <0x8>; -+ xlnx,ill-opcode-exception = <0x1>; -+ xlnx,imprecise-exceptions = <0x0>; -+ xlnx,instr-size = <0x20>; -+ xlnx,interconnect = <0x2>; -+ xlnx,interrupt-is-edge = <0x0>; -+ xlnx,interrupt-mon = <0x0>; -+ xlnx,ip-axi-mon = <0x0>; -+ xlnx,lockstep-master = <0x0>; -+ xlnx,lockstep-select = <0x0>; -+ xlnx,lockstep-slave = <0x0>; -+ xlnx,mmu-dtlb-size = <0x4>; -+ xlnx,mmu-itlb-size = <0x2>; -+ xlnx,mmu-privileged-instr = <0x0>; -+ xlnx,mmu-tlb-access = <0x3>; -+ xlnx,mmu-zones = <0x2>; -+ xlnx,num-sync-ff-clk = <0x2>; -+ xlnx,num-sync-ff-clk-debug = <0x2>; -+ xlnx,num-sync-ff-clk-irq = <0x1>; -+ xlnx,num-sync-ff-dbg-clk = <0x1>; -+ xlnx,num-sync-ff-dbg-trace-clk = <0x2>; -+ xlnx,number-of-pc-brk = <0x1>; -+ xlnx,number-of-rd-addr-brk = <0x0>; -+ xlnx,number-of-wr-addr-brk = <0x0>; -+ xlnx,opcode-0x0-illegal = <0x1>; -+ xlnx,optimization = <0x0>; -+ xlnx,pc-width = <0x20>; -+ xlnx,piaddr-size = <0x20>; -+ xlnx,pvr = <0x2>; -+ xlnx,pvr-user1 = <0x0>; -+ xlnx,pvr-user2 = <0x0>; -+ xlnx,reset-msr = <0x0>; -+ xlnx,reset-msr-bip = <0x0>; -+ xlnx,reset-msr-dce = <0x0>; -+ xlnx,reset-msr-ee = <0x0>; -+ xlnx,reset-msr-eip = <0x0>; -+ xlnx,reset-msr-ice = <0x0>; -+ xlnx,reset-msr-ie = <0x0>; -+ xlnx,sco = <0x0>; -+ xlnx,trace = <0x0>; -+ xlnx,unaligned-exceptions = <0x1>; -+ xlnx,use-barrel = <0x1>; -+ xlnx,use-branch-target-cache = <0x0>; -+ xlnx,use-config-reset = <0x0>; -+ xlnx,use-dcache = <0x1>; -+ xlnx,use-div = <0x1>; -+ xlnx,use-ext-brk = <0x0>; -+ xlnx,use-ext-nm-brk = <0x0>; -+ xlnx,use-extended-fsl-instr = <0x0>; -+ xlnx,use-fpu = <0x0>; -+ xlnx,use-hw-mul = <0x2>; -+ xlnx,use-icache = <0x1>; -+ xlnx,use-interrupt = <0x2>; -+ xlnx,use-mmu = <0x3>; -+ xlnx,use-msr-instr = <0x1>; -+ xlnx,use-non-secure = <0x0>; -+ xlnx,use-pcmp-instr = <0x1>; -+ xlnx,use-reorder-instr = <0x1>; -+ xlnx,use-stack-protection = <0x0>; -+ }; -+ }; -+ -+ clocks { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ -+ clk_cpu@0 { -+ #clock-cells = <0x0>; -+ clock-frequency = <0xbebc200>; -+ clock-output-names = "clk_cpu"; -+ compatible = "fixed-clock"; -+ reg = <0x0>; -+ linux,phandle = <0x3>; -+ phandle = <0x3>; -+ }; -+ -+ clk_bus_0@1 { -+ #clock-cells = <0x0>; -+ clock-frequency = <0xbebc200>; -+ clock-output-names = "clk_bus_0"; -+ compatible = "fixed-clock"; -+ reg = <0x1>; -+ linux,phandle = <0x8>; -+ phandle = <0x8>; -+ }; -+ }; -+ -+ amba_pl { -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ compatible = "simple-bus"; -+ ranges; -+ linux,phandle = <0x2>; -+ phandle = <0x2>; -+ -+ ethernet@40c00000 { -+ axistream-connected = <0x5>; -+ axistream-control-connected = <0x5>; -+ clock-frequency = <0x5f5e100>; -+ compatible = "xlnx,axi-ethernet-1.00.a"; -+ device_type = "network"; -+ interrupt-names = "interrupt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x4 0x2>; -+ phy-mode = "gmii"; -+ reg = <0x40c00000 0x40000>; -+ xlnx = <0x0>; -+ xlnx,axiliteclkrate = <0x0>; -+ xlnx,axisclkrate = <0x0>; -+ xlnx,clockselection = <0x0>; -+ xlnx,enableasyncsgmii = <0x0>; -+ xlnx,gt-type = <0x0>; -+ xlnx,gtinex = <0x0>; -+ xlnx,gtlocation = <0x0>; -+ xlnx,gtrefclksrc = <0x0>; -+ xlnx,include-dre; -+ xlnx,instantiatebitslice0 = <0x0>; -+ xlnx,phy-type = <0x1>; -+ xlnx,phyaddr = <0x1>; -+ xlnx,rable = <0x0>; -+ xlnx,rxcsum = <0x0>; -+ xlnx,rxlane0-placement = <0x0>; -+ xlnx,rxlane1-placement = <0x0>; -+ xlnx,rxmem = <0x1000>; -+ xlnx,rxnibblebitslice0used = <0x0>; -+ xlnx,tx-in-upper-nibble = <0x1>; -+ xlnx,txcsum = <0x0>; -+ xlnx,txlane0-placement = <0x0>; -+ xlnx,txlane1-placement = <0x0>; -+ phy-handle = <0x6>; -+ local-mac-address = [00 0a 35 00 22 01]; -+ linux,phandle = <0x7>; -+ phandle = <0x7>; -+ -+ mdio { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ -+ phy@7 { -+ device_type = "ethernet-phy"; -+ reg = <0x7>; -+ linux,phandle = <0x6>; -+ phandle = <0x6>; -+ }; -+ }; -+ }; -+ -+ dma@41e00000 { -+ #dma-cells = <0x1>; -+ axistream-connected = <0x7>; -+ axistream-control-connected = <0x7>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_lite_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,eth-dma"; -+ interrupt-names = "mm2s_introut", "s2mm_introut"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x3 0x2 0x2 0x2>; -+ reg = <0x41e00000 0x10000>; -+ xlnx,include-dre; -+ linux,phandle = <0x5>; -+ phandle = <0x5>; -+ }; -+ -+ timer@41c00000 { -+ clock-frequency = <0xbebc200>; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-timer-1.00.a"; -+ interrupt-names = "interrupt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x5 0x2>; -+ reg = <0x41c00000 0x10000>; -+ xlnx,count-width = <0x20>; -+ xlnx,gen0-assert = <0x1>; -+ xlnx,gen1-assert = <0x1>; -+ xlnx,one-timer-only = <0x0>; -+ xlnx,trig0-assert = <0x1>; -+ xlnx,trig1-assert = <0x1>; -+ }; -+ -+ gpio@40010000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40010000 0x10000>; -+ xlnx,all-inputs = <0x1>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x0>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x1>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ gpio@40020000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40020000 0x10000>; -+ xlnx,all-inputs = <0x1>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x0>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x4>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ i2c@40800000 { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ clock-frequency = <0xbebc200>; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-iic-2.00.a"; -+ interrupt-names = "iic2intc_irpt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x1 0x2>; -+ reg = <0x40800000 0x10000>; -+ -+ i2cswitch@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ reg = <0x74>; -+ -+ i2c@0 { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ reg = <0x0>; -+ -+ clock-generator@5d { -+ #clock-cells = <0x0>; -+ compatible = "silabs,si570"; -+ temperature-stability = <0x32>; -+ reg = <0x5d>; -+ factory-fout = <0x9502f90>; -+ clock-frequency = <0x8d9ee20>; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ reg = <0x3>; -+ -+ eeprom@54 { -+ compatible = "at,24c08"; -+ reg = <0x54>; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio@40030000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40030000 0x10000>; -+ xlnx,all-inputs = <0x0>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x1>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x8>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ flash@60000000 { -+ bank-width = <0x2>; -+ compatible = "cfi-flash"; -+ reg = <0x60000000 0x8000000>; -+ xlnx,axi-clk-period-ps = <0x1388>; -+ xlnx,include-datawidth-matching-0 = <0x1>; -+ xlnx,include-datawidth-matching-1 = <0x1>; -+ xlnx,include-datawidth-matching-2 = <0x1>; -+ xlnx,include-datawidth-matching-3 = <0x1>; -+ xlnx,include-negedge-ioregs = <0x0>; -+ xlnx,lflash-period-ps = <0x1388>; -+ xlnx,linear-flash-sync-burst = <0x0>; -+ xlnx,max-mem-width = <0x10>; -+ xlnx,mem-a-lsb = <0x0>; -+ xlnx,mem-a-msb = <0x1f>; -+ xlnx,mem0-type = <0x2>; -+ xlnx,mem0-width = <0x10>; -+ xlnx,mem1-type = <0x0>; -+ xlnx,mem1-width = <0x10>; -+ xlnx,mem2-type = <0x0>; -+ xlnx,mem2-width = <0x10>; -+ xlnx,mem3-type = <0x0>; -+ xlnx,mem3-width = <0x10>; -+ xlnx,num-banks-mem = <0x1>; -+ xlnx,page-size = <0x10>; -+ xlnx,parity-type-mem-0 = <0x0>; -+ xlnx,parity-type-mem-1 = <0x0>; -+ xlnx,parity-type-mem-2 = <0x0>; -+ xlnx,parity-type-mem-3 = <0x0>; -+ xlnx,port-diff = <0x0>; -+ xlnx,s-axi-en-reg = <0x0>; -+ xlnx,s-axi-mem-addr-width = <0x20>; -+ xlnx,s-axi-mem-data-width = <0x20>; -+ xlnx,s-axi-mem-id-width = <0x1>; -+ xlnx,s-axi-reg-addr-width = <0x5>; -+ xlnx,s-axi-reg-data-width = <0x20>; -+ xlnx,synch-pipedelay-0 = <0x1>; -+ xlnx,synch-pipedelay-1 = <0x1>; -+ xlnx,synch-pipedelay-2 = <0x1>; -+ xlnx,synch-pipedelay-3 = <0x1>; -+ xlnx,tavdv-ps-mem-0 = <0x1fbd0>; -+ xlnx,tavdv-ps-mem-1 = <0x3a98>; -+ xlnx,tavdv-ps-mem-2 = <0x3a98>; -+ xlnx,tavdv-ps-mem-3 = <0x3a98>; -+ xlnx,tcedv-ps-mem-0 = <0x1fbd0>; -+ xlnx,tcedv-ps-mem-1 = <0x3a98>; -+ xlnx,tcedv-ps-mem-2 = <0x3a98>; -+ xlnx,tcedv-ps-mem-3 = <0x3a98>; -+ xlnx,thzce-ps-mem-0 = <0x88b8>; -+ xlnx,thzce-ps-mem-1 = <0x1b58>; -+ xlnx,thzce-ps-mem-2 = <0x1b58>; -+ xlnx,thzce-ps-mem-3 = <0x1b58>; -+ xlnx,thzoe-ps-mem-0 = <0x1b58>; -+ xlnx,thzoe-ps-mem-1 = <0x1b58>; -+ xlnx,thzoe-ps-mem-2 = <0x1b58>; -+ xlnx,thzoe-ps-mem-3 = <0x1b58>; -+ xlnx,tlzwe-ps-mem-0 = <0xc350>; -+ xlnx,tlzwe-ps-mem-1 = <0x0>; -+ xlnx,tlzwe-ps-mem-2 = <0x0>; -+ xlnx,tlzwe-ps-mem-3 = <0x0>; -+ xlnx,tpacc-ps-flash-0 = <0x61a8>; -+ xlnx,tpacc-ps-flash-1 = <0x61a8>; -+ xlnx,tpacc-ps-flash-2 = <0x61a8>; -+ xlnx,tpacc-ps-flash-3 = <0x61a8>; -+ xlnx,twc-ps-mem-0 = <0x11170>; -+ xlnx,twc-ps-mem-1 = <0x3a98>; -+ xlnx,twc-ps-mem-2 = <0x3a98>; -+ xlnx,twc-ps-mem-3 = <0x3a98>; -+ xlnx,twp-ps-mem-0 = <0x13880>; -+ xlnx,twp-ps-mem-1 = <0x2ee0>; -+ xlnx,twp-ps-mem-2 = <0x2ee0>; -+ xlnx,twp-ps-mem-3 = <0x2ee0>; -+ xlnx,twph-ps-mem-0 = <0x13880>; -+ xlnx,twph-ps-mem-1 = <0x2ee0>; -+ xlnx,twph-ps-mem-2 = <0x2ee0>; -+ xlnx,twph-ps-mem-3 = <0x2ee0>; -+ xlnx,use-startup = <0x0>; -+ xlnx,use-startup-int = <0x0>; -+ xlnx,wr-rec-time-mem-0 = <0x186a0>; -+ xlnx,wr-rec-time-mem-1 = <0x6978>; -+ xlnx,wr-rec-time-mem-2 = <0x6978>; -+ xlnx,wr-rec-time-mem-3 = <0x6978>; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ -+ partition@0x00000000 { -+ label = "fpga"; -+ reg = <0x0 0xb00000>; -+ }; -+ -+ partition@0x00b00000 { -+ label = "boot"; -+ reg = <0xb00000 0x80000>; -+ }; -+ -+ partition@0x00b80000 { -+ label = "bootenv"; -+ reg = <0xb80000 0x20000>; -+ }; -+ -+ partition@0x00ba0000 { -+ label = "kernel"; -+ reg = <0xba0000 0xc00000>; -+ }; -+ -+ partition@0x017a0000 { -+ label = "spare"; -+ reg = <0x17a0000 0x0>; -+ }; -+ }; -+ -+ interrupt-controller@41200000 { -+ #interrupt-cells = <0x2>; -+ compatible = "xlnx,xps-intc-1.00.a"; -+ interrupt-controller; -+ reg = <0x41200000 0x10000>; -+ xlnx,kind-of-intr = <0x0>; -+ xlnx,num-intr-inputs = <0x6>; -+ linux,phandle = <0x4>; -+ phandle = <0x4>; -+ }; -+ -+ gpio@40040000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40040000 0x10000>; -+ xlnx,all-inputs = <0x1>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x0>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x5>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ gpio@40000000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40000000 0x10000>; -+ xlnx,all-inputs = <0x0>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x1>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x1>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ linux,phandle = <0x1>; -+ phandle = <0x1>; -+ }; -+ -+ serial@44a00000 { -+ clock-frequency = <0xbebc200>; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a"; -+ current-speed = <0x1c200>; -+ device_type = "serial"; -+ interrupt-names = "ip2intc_irpt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x0 0x2>; -+ port-number = <0x0>; -+ reg = <0x44a00000 0x10000>; -+ reg-offset = <0x1000>; -+ reg-shift = <0x2>; -+ xlnx,external-xin-clk-hz = <0x17d7840>; -+ xlnx,external-xin-clk-hz-d = <0x19>; -+ xlnx,has-external-rclk = <0x0>; -+ xlnx,has-external-xin = <0x0>; -+ xlnx,is-a-16550 = <0x1>; -+ xlnx,s-axi-aclk-freq-hz-d = "200.0"; -+ xlnx,use-modem-ports = <0x1>; -+ xlnx,use-user-ports = <0x1>; -+ }; -+ }; -+ - chosen { -- } ; --} ; -+ bootargs = "console=ttyS0,115200 earlyprintk"; -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ aliases { -+ ethernet0 = "/amba_pl/ethernet@40c00000"; -+ i2c0 = "/amba_pl/i2c@40800000"; -+ serial0 = "/amba_pl/serial@44a00000"; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x80000000 0x40000000>; -+ }; -+}; -+ -diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk -index a953977..cb75fde 100644 ---- a/board/xilinx/microblaze-generic/config.mk -+++ b/board/xilinx/microblaze-generic/config.mk -@@ -1,18 +1,10 @@ --# SPDX-License-Identifier: GPL-2.0+ --# --# (C) Copyright 2007 - 2016 Michal Simek --# --# Michal SIMEK <monstr@monstr.eu> -- --CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER)) -- --# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support. --CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare -- --CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -- --PLATFORM_CPPFLAGS += $(CPUFLAGS-1) $(CPUFLAGS-2) -+TEXT_BASE = 0x80400000 -+CONFIG_SYS_TEXT_BASE = 0x80400000 -+ -+PLATFORM_CPPFLAGS += -mxl-barrel-shift -+PLATFORM_CPPFLAGS += -mno-xl-soft-div -+PLATFORM_CPPFLAGS += -mxl-pattern-compare -+PLATFORM_CPPFLAGS += -mxl-multiply-high -+PLATFORM_CPPFLAGS += -mno-xl-soft-mul -+PLATFORM_CPPFLAGS += -mcpu=v11.0 -+PLATFORM_CPPFLAGS += -fgnu89-inline -diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig -index 02e62e2..8d64be4 100644 ---- a/configs/microblaze-generic_defconfig -+++ b/configs/microblaze-generic_defconfig -@@ -1,73 +1,58 @@ - CONFIG_MICROBLAZE=y --CONFIG_SYS_TEXT_BASE=0x29000000 - CONFIG_SPL_LIBCOMMON_SUPPORT=y - CONFIG_SPL_LIBGENERIC_SUPPORT=y - CONFIG_SPL_SERIAL_SUPPORT=y --CONFIG_SPL=y - CONFIG_TARGET_MICROBLAZE_GENERIC=y - CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 - CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 - CONFIG_XILINX_MICROBLAZE0_USE_DIV=1 - CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 --CONFIG_NR_DRAM_BANKS=1 -+CONFIG_SYS_TEXT_BASE=0x80400000 -+CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y --CONFIG_BOOTDELAY=-1 --CONFIG_USE_BOOTARGS=y --CONFIG_BOOTARGS="root=romfs" -+CONFIG_BOOTDELAY=4 - CONFIG_SYS_CONSOLE_IS_IN_ENV=y --CONFIG_DISPLAY_BOARDINFO=y --CONFIG_SPL_BOARD_INIT=y --CONFIG_SPL_SYS_MALLOC_SIMPLE=y - CONFIG_SPL_NOR_SUPPORT=y - CONFIG_SPL_OS_BOOT=y - CONFIG_SYS_OS_BASE=0x2c060000 - CONFIG_HUSH_PARSER=y --# CONFIG_AUTO_COMPLETE is not set --CONFIG_SYS_PROMPT="U-Boot-mONStR> " --CONFIG_CMD_IMLS=y --CONFIG_CMD_SPL=y -+CONFIG_SYS_PROMPT="U-Boot> " - CONFIG_CMD_ASKENV=y --CONFIG_CMD_GPIO=y - CONFIG_CMD_SAVES=y - # CONFIG_CMD_SETEXPR is not set -+CONFIG_SYS_ENET=y -+CONFIG_NET=y -+CONFIG_NETDEVICES=y -+CONFIG_CMD_NET=y - CONFIG_CMD_DHCP=y --CONFIG_CMD_TFTPPUT=y -+CONFIG_CMD_NFS=y - CONFIG_CMD_MII=y - CONFIG_CMD_PING=y - CONFIG_CMD_JFFS2=y --CONFIG_SPL_OF_CONTROL=y - CONFIG_OF_EMBED=y --CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" --CONFIG_NETCONSOLE=y --CONFIG_SPL_DM=y -+CONFIG_DM_ETH=y -+CONFIG_SYS_MALLOC_F=y -+CONFIG_SYS_GENERIC_BOARD=y -+CONFIG_XILINX_AXIEMAC=y -+CONFIG_SYS_NS16550=y -+CONFIG_CMD_FLASH=y -+CONFIG_MTD_NOR_FLASH=y -+CONFIG_CMD_IMLS=y -+CONFIG_CMD_GPIO=y - CONFIG_DM_GPIO=y - CONFIG_XILINX_GPIO=y --CONFIG_LED=y --CONFIG_LED_GPIO=y --CONFIG_MTD_NOR_FLASH=y --CONFIG_MTD_DEVICE=y --CONFIG_FLASH_CFI_DRIVER=y --CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y --CONFIG_FLASH_CFI_MTD=y --CONFIG_SYS_FLASH_PROTECTION=y --CONFIG_SYS_FLASH_CFI=y --CONFIG_PHY_ATHEROS=y --CONFIG_PHY_BROADCOM=y --CONFIG_PHY_DAVICOM=y --CONFIG_PHY_LXT=y --CONFIG_PHY_MARVELL=y -+CONFIG_CMD_TFTPPUT=y -+CONFIG_NETCONSOLE=y -+CONFIG_XILINX_FSL_LINKS=0 -+CONFIG_PHY_GIGE=y -+CONFIG_ENV_IS_IN_FLASH=y - CONFIG_PHY_MICREL=y - CONFIG_PHY_MICREL_KSZ90X1=y --CONFIG_PHY_NATSEMI=y --CONFIG_PHY_REALTEK=y --CONFIG_PHY_VITESSE=y --CONFIG_DM_ETH=y --CONFIG_XILINX_AXIEMAC=y --CONFIG_XILINX_EMACLITE=y --CONFIG_SYS_NS16550=y --CONFIG_XILINX_UARTLITE=y --CONFIG_SYSRESET_GPIO=y --CONFIG_SYSRESET_MICROBLAZE=y --CONFIG_WDT=y --CONFIG_XILINX_TB_WATCHDOG=y -+CONFIG_SPL_DM_SERIAL=y -+CONFIG_SPL_OF_LIBFDT=y -+CONFIG_PHY_XILINX=y -+# CONFIG_SPL is not set -+# CONFIG_CMD_EEPROM is not set -+# CONFIG_BOOTARGS is not set -+# CONFIG_USE_BOOTARGS is not set -diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h -index ba0952c..fd1da2b 100644 ---- a/include/configs/microblaze-generic.h -+++ b/include/configs/microblaze-generic.h -@@ -1,205 +1,173 @@ --/* SPDX-License-Identifier: GPL-2.0+ */ --/* -- * (C) Copyright 2007-2010 Michal Simek -- * -- * Michal SIMEK <monstr@monstr.eu> -- */ -- - #ifndef __CONFIG_H - #define __CONFIG_H - --#include "../board/xilinx/microblaze-generic/xparameters.h" -- --/* MicroBlaze CPU */ --#define MICROBLAZE_V5 1 -- --/* linear and spi flash memory */ --#ifdef XILINX_FLASH_START --#define FLASH --#undef SPIFLASH --#undef RAMENV /* hold environment in flash */ --#else --#undef FLASH --#undef SPIFLASH --#define RAMENV /* hold environment in RAM */ --#endif -+#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 } -+ -+/* processor - microblaze_0 */ -+#define XILINX_USE_MSR_INSTR 1 -+#define XILINX_USE_ICACHE 1 -+#define XILINX_USE_DCACHE 1 -+#define XILINX_DCACHE_BYTE_SIZE 16384 -+#define XILINX_PVR 2 -+#define MICROBLAZE_V5 -+#define CONFIG_CMD_IRQ -+#define CONFIG_DCACHE -+#define CONFIG_ICACHE -+ -+/* main_memory - ddr3_sdram */ -+ -+ -+/* uart - rs232_uart */ -+#define CONFIG_SYS_NS16550_COM1 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -+#define CONFIG_SYS_NS16550_REG_SIZE -4 -+#define CONSOLE_ARG "console=console=ttyS0,115200\0" -+#define CONFIG_SYS_NS16550_SERIAL -+#define CONFIG_CONS_INDEX 1 -+#define ESERIAL0 "eserial0=setenv stdout eserial0;setenv stdin eserial0\0" -+#define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0" -+#define CONFIG_SYS_NS16550_CLK 200000000 -+#define CONFIG_BAUDRATE 115200 -+ -+/* ethernet - axi_ethernet */ -+#define CONFIG_PHY_XILINX -+#define CONFIG_MII -+#define CONFIG_PHY_MARVELL -+#define CONFIG_PHY_NATSEMI -+#define CONFIG_NET_MULTI -+#define CONFIG_PHY_REALTEK -+#define CONFIG_NETCONSOLE 1 -+#define CONFIG_SERVERIP 172.25.229.115 -+#define CONFIG_IPADDR -+ -+/* nor_flash - linear_flash */ -+#define CONFIG_SYS_FLASH_BASE 0x60000000 -+#define CONFIG_FLASH_END 0x68000000 -+#define CONFIG_SYS_MAX_FLASH_SECT 2048 -+#define CONFIG_SYS_FLASH_PROTECTION -+#define CONFIG_SYS_FLASH_EMPTY_INFO -+#define CONFIG_SYS_FLASH_CFI -+#define CONFIG_FLASH_CFI_DRIVER -+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -+#define CONFIG_SYS_MAX_FLASH_BANKS 1 -+ -+/* timer - axi_timer_0 */ -+ -+/* intc - microblaze_0_axi_intc */ -+ -+/* FPGA */ -+ -+/* Memory testing handling */ -+#define CONFIG_SYS_MEMTEST_START 0x80000000 -+#define CONFIG_SYS_MEMTEST_END (0x80000000 + 0x1000) -+#define CONFIG_SYS_LOAD_ADDR 0x80000000 /* default load address */ -+ -+/* global pointer options */ -+#define CONFIG_SYS_GBL_DATA_OFFSET (0x40000000 - GENERATED_GBL_DATA_SIZE) -+ -+/* Size of malloc() pool */ -+#define SIZE 0x100000 -+#define CONFIG_SYS_MALLOC_LEN SIZE -+#define CONFIG_SYS_MONITOR_LEN SIZE -+#define CONFIG_SYS_MONITOR_BASE (0x80000000 + CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) -+#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -+ -+/* stack */ -+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_F_LEN) -+ -+/* No of_control support yet*/ -+ -+/* BOOTP options */ -+#define CONFIG_BOOTP_SERVERIP -+#define CONFIG_BOOTP_BOOTFILESIZE -+#define CONFIG_BOOTP_BOOTPATH -+#define CONFIG_BOOTP_GATEWAY -+#define CONFIG_BOOTP_HOSTNAME -+#define CONFIG_BOOTP_MAY_FAIL -+#define CONFIG_BOOTP_DNS -+#define CONFIG_BOOTP_SUBNETMASK -+#define CONFIG_BOOTP_PXE - --/* uart */ --/* The following table includes the supported baudrates */ --# define CONFIG_SYS_BAUDRATE_TABLE \ -- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -- --/* setting reset address */ --/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ -- --#define CONFIG_SYS_MALLOC_LEN 0xC0000 -- --/* Stack location before relocation */ --#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \ -- CONFIG_SYS_MALLOC_F_LEN) -- --/* -- * CFI flash memory layout - Example -- * CONFIG_SYS_FLASH_BASE = 0x2200_0000; -- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB -- * -- * SECT_SIZE = 0x20000; 128kB is one sector -- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store -- * -- * 0x2200_0000 CONFIG_SYS_FLASH_BASE -- * FREE 256kB -- * 0x2204_0000 CONFIG_ENV_ADDR -- * ENV_AREA 128kB -- * 0x2206_0000 -- * FREE -- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE -- * -- */ -- --#ifdef FLASH --# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START --# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE --/* ?empty sector */ --# define CONFIG_SYS_FLASH_EMPTY_INFO 1 --/* max number of memory banks */ --# define CONFIG_SYS_MAX_FLASH_BANKS 1 --/* max number of sectors on one chip */ --# define CONFIG_SYS_MAX_FLASH_SECT 512 --/* hardware flash protection */ --/* use buffered writes (20x faster) */ --# ifdef RAMENV --# define CONFIG_ENV_SIZE 0x1000 --# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) -- --# else /* FLASH && !RAMENV */ --/* 128K(one sector) for env */ --# define CONFIG_ENV_SECT_SIZE 0x20000 --# define CONFIG_ENV_ADDR \ -- (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) --# define CONFIG_ENV_SIZE 0x20000 --# endif /* FLASH && !RAMBOOT */ --#else /* !FLASH */ -- --#ifdef SPIFLASH --# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 --# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ --# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS -- --# ifdef RAMENV --# define CONFIG_ENV_SIZE 0x1000 --# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) -- --# else /* SPIFLASH && !RAMENV */ --# define CONFIG_ENV_SPI_MODE SPI_MODE_3 --# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED --# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS --/* 128K(two sectors) for env */ --# define CONFIG_ENV_SECT_SIZE 0x10000 --# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE) --/* Warning: adjust the offset in respect of other flash content and size */ --# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */ --# endif /* SPIFLASH && !RAMBOOT */ --#else /* !SPIFLASH */ -- --/* ENV in RAM */ --# define CONFIG_ENV_SIZE 0x1000 --# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) --#endif /* !SPIFLASH */ --#endif /* !FLASH */ -- --#if defined(XILINX_USE_ICACHE) --# define CONFIG_ICACHE --#else --# undef CONFIG_ICACHE --#endif -+/*Command line configuration.*/ -+#define CONFIG_CMDLINE_EDITING -+#define CONFIG_AUTO_COMPLETE - --#if defined(XILINX_USE_DCACHE) --# define CONFIG_DCACHE --#else --# undef CONFIG_DCACHE --#endif -+/* Miscellaneous configurable options */ -+#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - --#ifndef XILINX_DCACHE_BYTE_SIZE --#define XILINX_DCACHE_BYTE_SIZE 32768 --#endif - --/* -- * BOOTP options -- */ --#define CONFIG_BOOTP_BOOTFILESIZE -+/* Use the HUSH parser */ -+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - --#if defined(CONFIG_MTD_PARTITIONS) --/* MTD partitions */ -+#define CONFIG_ENV_VARS_UBOOT_CONFIG -+#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */ - --/* default mtd partition table */ --#endif -+#define CONFIG_LMB - --/* size of console buffer */ --#define CONFIG_SYS_CBSIZE 512 --/* max number of command args */ --#define CONFIG_SYS_MAXARGS 15 --/* default load address */ --#define CONFIG_SYS_LOAD_ADDR 0 -+/* FDT support */ -+#define CONFIG_DISPLAY_BOARDINFO_LATE - --#define CONFIG_HOSTNAME "microblaze-generic" --#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" - - /* architecture dependent code */ --#define CONFIG_SYS_USR_EXCEP /* user exception */ -- --#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" -- --#ifndef CONFIG_EXTRA_ENV_SETTINGS --#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ -- "nor0=flash-0\0"\ -- "mtdparts=mtdparts=flash-0:"\ -- "256k(u-boot),256k(env),3m(kernel),"\ -- "1m(romfs),1m(cramfs),-(jffs2)\0"\ -- "nc=setenv stdout nc;"\ -- "setenv stdin nc\0" \ -- "serial=setenv stdout serial;"\ -- "setenv stdin serial\0" --#endif -- --/* Enable flat device tree support */ --#define CONFIG_LMB 1 -+#define CONFIG_SYS_USR_EXCEP /* user exception */ -+#define CONFIG_SYS_HZ 1000 -+ -+/* Boot Argument Buffer Size */ -+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -+#define CONFIG_SYS_LONGHELP -+/* Initial memory map for Linux */ -+#define CONFIG_SYS_BOOTMAPSZ 0x8000000 -+ -+/* Environment settings*/ -+#define CONFIG_ENV_ADDR 0x60b80000 -+#define CONFIG_ENV_SIZE 0x20000 -+#define CONFIG_ENV_SECT_SIZE 0x20000 -+/* PREBOOT */ -+#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot; echo; dhcp" -+ -+/* Extra U-Boot Env settings */ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ SERIAL_MULTI \ -+ CONSOLE_ARG \ -+ ESERIAL0 \ -+ "nc=setenv stdout nc;setenv stdin nc;\0" \ -+ "ethaddr=00:0a:35:00:22:01\0" \ -+ "autoload=no\0" \ -+ "sdbootdev=0\0" \ -+ "clobstart=0x81000000\0" \ -+ "netstart=0x81000000\0" \ -+ "dtbnetstart=0x82800000\0" \ -+ "loadaddr=0x81000000\0" \ -+ "bootsize=0x80000\0" \ -+ "bootstart=0x60b00000\0" \ -+ "boot_img=u-boot-s.bin\0" \ -+ "load_boot=tftpboot ${clobstart} ${boot_img}\0" \ -+ "update_boot=setenv img boot; setenv psize ${bootsize}; setenv installcmd \"install_boot\"; run load_boot test_img; setenv img; setenv psize; setenv installcmd\0" \ -+ "install_boot=protect off ${bootstart} +${bootsize} && erase ${bootstart} +${bootsize} && " "cp.b ${clobstart} ${bootstart} ${filesize}\0" \ -+ "bootenvsize=0x20000\0" \ -+ "bootenvstart=0x60b80000\0" \ -+ "eraseenv=protect off ${bootenvstart} +${bootenvsize} && erase ${bootenvstart} +${bootenvsize}\0" \ -+ "kernelsize=0xc00000\0" \ -+ "kernelstart=0x60ba0000\0" \ -+ "kernel_img=image.ub\0" \ -+ "load_kernel=tftpboot ${clobstart} ${kernel_img}\0" \ -+ "update_kernel=setenv img kernel; setenv psize ${kernelsize}; setenv installcmd \"install_kernel\"; run load_kernel test_crc; setenv img; setenv psize; setenv installcmd\0" \ -+ "install_kernel=protect off ${kernelstart} +${kernelsize} && erase ${kernelstart} +${kernelsize} && " "cp.b ${clobstart} ${kernelstart} ${filesize}\0" \ -+ "cp_kernel2ram=cp.b ${kernelstart} ${netstart} ${kernelsize}\0" \ -+ "fpgasize=0xb00000\0" \ -+ "fpgastart=0x60000000\0" \ -+ "fpga_img=system.bit.bin\0" \ -+ "load_fpga=tftpboot ${clobstart} ${fpga_img}\0" \ -+ "update_fpga=setenv img fpga; setenv psize ${fpgasize}; setenv installcmd \"install_fpga\"; run load_fpga test_img; setenv img; setenv psize; setenv installcmd\0" \ -+ "install_fpga=protect off ${fpgastart} +${fpgasize} && erase ${fpgastart} +${fpgasize} && " "cp.b ${clobstart} ${fpgastart} ${filesize}\0" \ -+ "fault=echo ${img} image size is greater than allocated place - partition ${img} is NOT UPDATED\0" \ -+ "test_crc=if imi ${clobstart}; then run test_img; else echo ${img} Bad CRC - ${img} is NOT UPDATED; fi\0" \ -+ "test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \ -+ "netboot=tftpboot ${netstart} ${kernel_img} && bootm\0" \ -+ "default_bootcmd=run cp_kernel2ram && bootm ${netstart}\0" \ -+"" -+/* BOOTCOMMAND */ -+#define CONFIG_BOOTCOMMAND "run default_bootcmd" - --#if defined(CONFIG_XILINX_AXIEMAC) --# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 - #endif -- --/* SPL part */ -- --#ifdef CONFIG_SYS_FLASH_BASE --# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE --#endif -- --/* for booting directly linux */ -- --#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ -- 0x40000) --#define CONFIG_SYS_FDT_SIZE (16 << 10) --#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ -- 0x1000000) -- --/* SP location before relocation, must use scratch RAM */ --/* BRAM start */ --#define CONFIG_SYS_INIT_RAM_ADDR 0x0 --/* BRAM size - will be generated */ --#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -- --# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ -- CONFIG_SYS_INIT_RAM_SIZE - \ -- CONFIG_SYS_MALLOC_F_LEN) -- --/* Just for sure that there is a space for stack */ --#define CONFIG_SPL_STACK_SIZE 0x100 -- --#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -- --#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ -- CONFIG_SYS_INIT_RAM_ADDR - \ -- CONFIG_SYS_MALLOC_F_LEN - \ -- CONFIG_SPL_STACK_SIZE) -- --#endif /* __CONFIG_H */ --- -2.7.5 - diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb deleted file mode 100644 index 3377635df..000000000 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb +++ /dev/null @@ -1,32 +0,0 @@ -UBOOT_VERSION = "v2019.01" -XILINX_RELEASE_VERSION = "v2019.1" - -UBRANCH ?= "master" - -SRCREV ?= "d895ac5e94815d4b45dcf09d4752c5c2334a51db" - -include u-boot-xlnx.inc -include u-boot-spl-zynq-init.inc - -SRC_URI_append_kc705-microblazeel = " file://microblaze-kc705-Convert-microblaze-generic-to-k.patch" - -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://README;beginline=1;endline=4;md5=744e7e3bb0c94b4b9f6b3db3bf893897" - -# u-boot-xlnx has support for these -HAS_PLATFORM_INIT ?= " \ - zynq_microzed_config \ - zynq_zed_config \ - zynq_zc702_config \ - zynq_zc706_config \ - zynq_zybo_config \ - xilinx_zynqmp_zcu102_rev1_0_config \ - xilinx_zynqmp_zcu106_revA_config \ - xilinx_zynqmp_zcu104_revC_config \ - xilinx_zynqmp_zcu100_revC_config \ - xilinx_zynqmp_zcu111_revA_config \ - xilinx_zynqmp_zc1275_revA_config \ - xilinx_zynqmp_zc1275_revB_config \ - xilinx_zynqmp_zc1254_revA_config \ - " - diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2020.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2020.1.bb new file mode 100644 index 000000000..0eb66c8ad --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2020.1.bb @@ -0,0 +1,19 @@ +UBOOT_VERSION = "v2020.01" + +UBRANCH ?= "xlnx_rebase_v2020.01" + +SRCREV ?= "86c84c0d0f916ec00d5d76a32dc9372a25429ca9" + +include u-boot-xlnx.inc +include u-boot-spl-zynq-init.inc + +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://README;beginline=1;endline=4;md5=744e7e3bb0c94b4b9f6b3db3bf893897" + +# u-boot-xlnx has support for these +HAS_PLATFORM_INIT ?= " \ + xilinx_zynqmp_virt_config \ + xilinx_zynq_virt_defconfig \ + xilinx_versal_vc_p_a2197_revA_x_prc_01_revA \ + " + diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb index d2eedd58a..a4f40685b 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb @@ -24,11 +24,11 @@ KERNEL_BOOTCMD_zynq ?= "bootm" KERNEL_BOOTCMD_versal ?= "booti" BOOTMODE ?= "sd" -BOOTMODE_versal ?= "qspi" SRC_URI = " \ file://boot.cmd.sd.zynq \ file://boot.cmd.sd.zynqmp \ + file://boot.cmd.sd.versal \ file://boot.cmd.qspi.versal \ file://pxeboot.pxe \ " @@ -40,10 +40,10 @@ UBOOTPXE_CONFIG ?= "pxelinux.cfg" UBOOTPXE_CONFIG_NAME = "${UBOOTPXE_CONFIG}-${DATETIME}" UBOOTPXE_CONFIG_NAME[vardepsexclude] = "DATETIME" -DEVICETREE_ADDRESS_zynqmp ?= "0x4000000" +DEVICETREE_ADDRESS_zynqmp ?= "0x100000" DEVICETREE_ADDRESS_zynq ?= "0x2000000" DEVICETREE_ADDRESS_versal ?= "0x1000" -KERNEL_LOAD_ADDRESS_zynqmp ?= "0x80000" +KERNEL_LOAD_ADDRESS_zynqmp ?= "0x200000" KERNEL_LOAD_ADDRESS_zynq ?= "0x2080000" KERNEL_LOAD_ADDRESS_versal ?= "0x80000" @@ -65,6 +65,7 @@ do_compile() { mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \ -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \ + -e 's/@@RAMDISK_IMAGE@@/${RAMDISK_IMAGE}/' \ "${WORKDIR}/pxeboot.pxe" > "pxeboot.pxe" } diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi deleted file mode 100644 index 84a25d291..000000000 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi +++ /dev/null @@ -1 +0,0 @@ -booti 0x80000 0x6000000 0x1000 diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd deleted file mode 100644 index 67a8057be..000000000 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd +++ /dev/null @@ -1,6 +0,0 @@ -setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused -devicetree_image=@@DEVICE_TREE_NAME@@ -fatload mmc 0 ${fdt_addr_r} ${devicetree_image} -fatload mmc $sdbootdev:$partid ${kernel_addr_r} @@KERNEL_IMAGETYPE@@ -booti ${kernel_addr_r} - ${fdt_addr_r} - diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.versal b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.versal new file mode 100644 index 000000000..10e83cd09 --- /dev/null +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.versal @@ -0,0 +1,3 @@ +setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait clk_ignore_unused +fatload mmc $sdbootdev:$partid @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@ +@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@ diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp index 18f82d784..9d4c6b9e7 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp @@ -1,4 +1,3 @@ setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused -fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@ fatload mmc $sdbootdev:$partid @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@ @@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@ diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe index 6d7a0a946..407965453 100644 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe +++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe @@ -1,3 +1,4 @@ LABEL Linux KERNEL @@KERNEL_IMAGETYPE@@ FDT @@DEVICE_TREE_NAME@@ +INITRD @@RAMDISK_IMAGE@@ |