diff options
Diffstat (limited to 'poky/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst')
-rw-r--r-- | poky/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst | 430 |
1 files changed, 430 insertions, 0 deletions
diff --git a/poky/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst b/poky/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst new file mode 100644 index 000000000..7e24b9e68 --- /dev/null +++ b/poky/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst @@ -0,0 +1,430 @@ +.. SPDX-License-Identifier: CC-BY-2.0-UK + +========================= +Yocto Project Quick Build +========================= + +Welcome! +======== + +This short document steps you through the process for a typical +image build using the Yocto Project. The document also introduces how to +configure a build for specific hardware. You will use Yocto Project to +build a reference embedded OS called Poky. + +.. note:: + + - The examples in this paper assume you are using a native Linux + system running a recent Ubuntu Linux distribution. If the machine + you want to use Yocto Project on to build an image + (:term:`Build Host`) is not + a native Linux system, you can still perform these steps by using + CROss PlatformS (CROPS) and setting up a Poky container. See the + :ref:`dev-manual/dev-manual-start:setting up to use cross platforms (crops)` + section + in the Yocto Project Development Tasks Manual for more + information. + + - You may use Windows Subsystem For Linux v2 to set up a build host + using Windows 10. + + .. note:: + + The Yocto Project is not compatible with WSLv1, it is + compatible but not officially supported nor validated with + WSLv2, if you still decide to use WSL please upgrade to WSLv2. + + See the :ref:`dev-manual/dev-manual-start:setting up to use windows + subsystem for linux (wslv2)` section in the Yocto Project Development + Tasks Manual for more information. + +If you want more conceptual or background information on the Yocto +Project, see the :doc:`../overview-manual/overview-manual`. + +Compatible Linux Distribution +============================= + +Make sure your :term:`Build Host` meets the +following requirements: + +- 50 Gbytes of free disk space + +- Runs a supported Linux distribution (i.e. recent releases of Fedora, + openSUSE, CentOS, Debian, or Ubuntu). For a list of Linux + distributions that support the Yocto Project, see the + :ref:`ref-manual/ref-system-requirements:supported linux distributions` + section in the Yocto Project Reference Manual. For detailed + information on preparing your build host, see the + :ref:`dev-manual/dev-manual-start:preparing the build host` + section in the Yocto Project Development Tasks Manual. + +- + + - Git 1.8.3.1 or greater + - tar 1.28 or greater + - Python 3.5.0 or greater. + - gcc 5.0 or greater. + +If your build host does not meet any of these three listed version +requirements, you can take steps to prepare the system so that you +can still use the Yocto Project. See the +:ref:`ref-manual/ref-system-requirements:required git, tar, python and gcc versions` +section in the Yocto Project Reference Manual for information. + +Build Host Packages +=================== + +You must install essential host packages on your build host. The +following command installs the host packages based on an Ubuntu +distribution: + +.. code-block:: shell + + $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; + +.. note:: + + For host package requirements on all supported Linux distributions, + see the :ref:`ref-manual/ref-system-requirements:required packages for the build host` + section in the Yocto Project Reference Manual. + +Use Git to Clone Poky +===================== + +Once you complete the setup instructions for your machine, you need to +get a copy of the Poky repository on your build host. Use the following +commands to clone the Poky repository. + +.. code-block:: shell + + $ git clone git://git.yoctoproject.org/poky + Cloning into 'poky'... + remote: Counting + objects: 432160, done. remote: Compressing objects: 100% + (102056/102056), done. remote: Total 432160 (delta 323116), reused + 432037 (delta 323000) Receiving objects: 100% (432160/432160), 153.81 MiB | 8.54 MiB/s, done. + Resolving deltas: 100% (323116/323116), done. + Checking connectivity... done. + +Move to the ``poky`` directory and take a look at the tags: + +.. code-block:: shell + + $ cd poky + $ git fetch --tags + $ git tag + 1.1_M1.final + 1.1_M1.rc1 + 1.1_M1.rc2 + 1.1_M2.final + 1.1_M2.rc1 + . + . + . + yocto-2.5 + yocto-2.5.1 + yocto-2.5.2 + yocto-2.6 + yocto-2.6.1 + yocto-2.6.2 + yocto-2.7 + yocto_1.5_M5.rc8 + +For this example, check out the branch based on the +``&DISTRO_REL_TAG;`` release: + +.. code-block:: shell + + $ git checkout tags/&DISTRO_REL_TAG; -b my-&DISTRO_REL_TAG; + Switched to a new branch 'my-&DISTRO_REL_TAG;' + +The previous Git checkout command creates a local branch named +``my-&DISTRO_REL_TAG;``. The files available to you in that branch exactly +match the repository's files in the ``&DISTRO_NAME_NO_CAP;`` development +branch at the time of the Yocto Project &DISTRO_REL_TAG; release. + +For more options and information about accessing Yocto Project related +repositories, see the +:ref:`dev-manual/dev-manual-start:locating yocto project source files` +section in the Yocto Project Development Tasks Manual. + +Building Your Image +=================== + +Use the following steps to build your image. The build process creates +an entire Linux distribution, including the toolchain, from source. + +.. note:: + + - If you are working behind a firewall and your build host is not + set up for proxies, you could encounter problems with the build + process when fetching source code (e.g. fetcher failures or Git + failures). + + - If you do not know your proxy settings, consult your local network + infrastructure resources and get that information. A good starting + point could also be to check your web browser settings. Finally, + you can find more information on the + ":yocto_wiki:`Working Behind a Network Proxy </wiki/Working_Behind_a_Network_Proxy>`" + page of the Yocto Project Wiki. + +#. **Initialize the Build Environment:** From within the ``poky`` + directory, run the :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\`` + environment + setup script to define Yocto Project's build environment on your + build host. + + .. code-block:: shell + + $ cd ~/poky + $ source &OE_INIT_FILE; + You had no conf/local.conf file. This configuration file has therefore been + created for you with some default values. You may wish to edit it to, for + example, select a different MACHINE (target hardware). See conf/local.conf + for more information as common configuration options are commented. + + You had no conf/bblayers.conf file. This configuration file has therefore + been created for you with some default values. To add additional metadata + layers into your configuration please add entries to conf/bblayers.conf. + + The Yocto Project has extensive documentation about OE including a reference + manual which can be found at: + http://yoctoproject.org/documentation + + For more information about OpenEmbedded see their website: + http://www.openembedded.org/ + + ### Shell environment set up for builds. ### + + You can now run 'bitbake <target>' + + Common targets are: + core-image-minimal + core-image-sato + meta-toolchain + meta-ide-support + + You can also run generated qemu images with a command like 'runqemu qemux86-64' + + Among other things, the script creates the :term:`Build Directory`, which is + ``build`` in this case and is located in the :term:`Source Directory`. After + the script runs, your current working directory is set to the Build + Directory. Later, when the build completes, the Build Directory contains all the + files created during the build. + +#. **Examine Your Local Configuration File:** When you set up the build + environment, a local configuration file named ``local.conf`` becomes + available in a ``conf`` subdirectory of the Build Directory. For this + example, the defaults are set to build for a ``qemux86`` target, + which is suitable for emulation. The package manager used is set to + the RPM package manager. + + .. tip:: + + You can significantly speed up your build and guard against fetcher + failures by using mirrors. To use mirrors, add these lines to your + local.conf file in the Build directory: :: + + SSTATE_MIRRORS = "\ + file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH \n \ + file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION_MINUS_ONE;/PATH;downloadfilename=PATH \n \ + file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION;/PATH;downloadfilename=PATH \n \ + " + + + The previous examples showed how to add sstate paths for Yocto Project + &YOCTO_DOC_VERSION_MINUS_ONE;, &YOCTO_DOC_VERSION;, and a development + area. For a complete index of sstate locations, see http://sstate.yoctoproject.org/. + +#. **Start the Build:** Continue with the following command to build an OS + image for the target, which is ``core-image-sato`` in this example: + + .. code-block:: shell + + $ bitbake core-image-sato + + For information on using the ``bitbake`` command, see the + :ref:`usingpoky-components-bitbake` section in the Yocto Project Overview and + Concepts Manual, or see the ":ref:`BitBake Command + <bitbake:bitbake-user-manual-command>`" section in the BitBake User Manual. + +#. **Simulate Your Image Using QEMU:** Once this particular image is + built, you can start QEMU, which is a Quick EMUlator that ships with + the Yocto Project: + + .. code-block:: shell + + $ runqemu qemux86-64 + + If you want to learn more about running QEMU, see the + :ref:`dev-manual/dev-manual-qemu:using the quick emulator (qemu)` chapter in + the Yocto Project Development Tasks Manual. + +#. **Exit QEMU:** Exit QEMU by either clicking on the shutdown icon or by typing + ``Ctrl-C`` in the QEMU transcript window from which you evoked QEMU. + +Customizing Your Build for Specific Hardware +============================================ + +So far, all you have done is quickly built an image suitable for +emulation only. This section shows you how to customize your build for +specific hardware by adding a hardware layer into the Yocto Project +development environment. + +In general, layers are repositories that contain related sets of +instructions and configurations that tell the Yocto Project what to do. +Isolating related metadata into functionally specific layers facilitates +modular development and makes it easier to reuse the layer metadata. + +.. note:: + + By convention, layer names start with the string "meta-". + +Follow these steps to add a hardware layer: + +#. **Find a Layer:** Lots of hardware layers exist. The Yocto Project + :yocto_git:`Source Repositories <>` has many hardware layers. + This example adds the + `meta-altera <https://github.com/kraj/meta-altera>`__ hardware layer. + +#. **Clone the Layer:** Use Git to make a local copy of the layer on your + machine. You can put the copy in the top level of the copy of the + Poky repository created earlier: + + .. code-block:: shell + + $ cd ~/poky + $ git clone https://github.com/kraj/meta-altera.git + Cloning into 'meta-altera'... + remote: Counting objects: 25170, done. + remote: Compressing objects: 100% (350/350), done. + remote: Total 25170 (delta 645), reused 719 (delta 538), pack-reused 24219 + Receiving objects: 100% (25170/25170), 41.02 MiB | 1.64 MiB/s, done. + Resolving deltas: 100% (13385/13385), done. + Checking connectivity... done. + + The hardware layer now exists + with other layers inside the Poky reference repository on your build + host as ``meta-altera`` and contains all the metadata needed to + support hardware from Altera, which is owned by Intel. + + .. note:: + + It is recommended for layers to have a branch per Yocto Project release. + Please make sure to checkout the layer branch supporting the Yocto Project + release you're using. + +#. **Change the Configuration to Build for a Specific Machine:** The + :term:`MACHINE` variable in the + ``local.conf`` file specifies the machine for the build. For this + example, set the ``MACHINE`` variable to ``cyclone5``. These + configurations are used: + https://github.com/kraj/meta-altera/blob/master/conf/machine/cyclone5.conf. + + .. note:: + + See the "Examine Your Local Configuration File" step earlier for more + information on configuring the build. + +#. **Add Your Layer to the Layer Configuration File:** Before you can use + a layer during a build, you must add it to your ``bblayers.conf`` + file, which is found in the + :term:`Build Directory` ``conf`` + directory. + + Use the ``bitbake-layers add-layer`` command to add the layer to the + configuration file: + + .. code-block:: shell + + $ cd ~/poky/build + $ bitbake-layers add-layer ../meta-altera + NOTE: Starting bitbake server... + Parsing recipes: 100% |##################################################################| Time: 0:00:32 + Parsing of 918 .bb files complete (0 cached, 918 parsed). 1401 targets, + 123 skipped, 0 masked, 0 errors. + + You can find + more information on adding layers in the + :ref:`dev-manual/dev-manual-common-tasks:adding a layer using the \`\`bitbake-layers\`\` script` + section. + +Completing these steps has added the ``meta-altera`` layer to your Yocto +Project development environment and configured it to build for the +``cyclone5`` machine. + +.. note:: + + The previous steps are for demonstration purposes only. If you were + to attempt to build an image for the ``cyclone5`` machine, you should + read the Altera ``README``. + +Creating Your Own General Layer +=============================== + +Maybe you have an application or specific set of behaviors you need to +isolate. You can create your own general layer using the +``bitbake-layers create-layer`` command. The tool automates layer +creation by setting up a subdirectory with a ``layer.conf`` +configuration file, a ``recipes-example`` subdirectory that contains an +``example.bb`` recipe, a licensing file, and a ``README``. + +The following commands run the tool to create a layer named +``meta-mylayer`` in the ``poky`` directory: + +.. code-block:: shell + + $ cd ~/poky + $ bitbake-layers create-layer meta-mylayer + NOTE: Starting bitbake server... + Add your new layer with 'bitbake-layers add-layer meta-mylayer' + +For more information +on layers and how to create them, see the +:ref:`dev-manual/dev-manual-common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script` +section in the Yocto Project Development Tasks Manual. + +Where To Go Next +================ + +Now that you have experienced using the Yocto Project, you might be +asking yourself "What now?". The Yocto Project has many sources of +information including the website, wiki pages, and user manuals: + +- **Website:** The :yocto_home:`Yocto Project Website <>` provides + background information, the latest builds, breaking news, full + development documentation, and access to a rich Yocto Project + Development Community into which you can tap. + +- **Developer Screencast:** The `Getting Started with the Yocto Project - + New Developer Screencast Tutorial <http://vimeo.com/36450321>`__ + provides a 30-minute video created for users unfamiliar with the + Yocto Project but familiar with Linux build hosts. While this + screencast is somewhat dated, the introductory and fundamental + concepts are useful for the beginner. + +- **Yocto Project Overview and Concepts Manual:** The + :doc:`../overview-manual/overview-manual` is a great + place to start to learn about the Yocto Project. This manual + introduces you to the Yocto Project and its development environment. + The manual also provides conceptual information for various aspects + of the Yocto Project. + +- **Yocto Project Wiki:** The :yocto_wiki:`Yocto Project Wiki <>` + provides additional information on where to go next when ramping up + with the Yocto Project, release information, project planning, and QA + information. + +- **Yocto Project Mailing Lists:** Related mailing lists provide a forum + for discussion, patch submission and announcements. Several mailing + lists exist and are grouped according to areas of concern. See the + :ref:`ref-manual/resources:mailing lists` + section in the Yocto Project Reference Manual for a complete list of + Yocto Project mailing lists. + +- **Comprehensive List of Links and Other Documentation:** The + :ref:`ref-manual/resources:links and related documentation` + section in the Yocto Project Reference Manual provides a + comprehensive list of all related links and other user documentation. + +.. include:: /boilerplate.rst |