diff options
Diffstat (limited to 'poky/documentation/ref-manual/ref-system-requirements.xml')
-rw-r--r-- | poky/documentation/ref-manual/ref-system-requirements.xml | 256 |
1 files changed, 212 insertions, 44 deletions
diff --git a/poky/documentation/ref-manual/ref-system-requirements.xml b/poky/documentation/ref-manual/ref-system-requirements.xml index 9c2198a76..7a11ec2cf 100644 --- a/poky/documentation/ref-manual/ref-system-requirements.xml +++ b/poky/documentation/ref-manual/ref-system-requirements.xml @@ -8,12 +8,12 @@ <para> Welcome to the Yocto Project Reference Manual! This manual provides reference information for the current release - of the Yocto Project. - The manual is best used after you have an understanding + of the Yocto Project, and + is most effectively used after you have an understanding of the basics of the Yocto Project. The manual is neither meant to be read as a starting point to the - Yocto Project nor read from start to finish. - Use this manual to find variable definitions, class + Yocto Project, nor read from start to finish. + Rather, use this manual to find variable definitions, class descriptions, and so forth as needed during the course of using the Yocto Project. </para> @@ -66,12 +66,15 @@ below. </para></listitem> <listitem><para> - The Yocto Project is not compatible with the - <ulink url='https://en.wikipedia.org/wiki/Windows_Subsystem_for_Linux'>Windows Subsystem for Linux</ulink> - (WSL). - You cannot use a - <link linkend='hardware-build-system-term'>build host</link> - that is running WSL. + You may use Windows Subsystem For Linux v2 to set up a build + host using Windows 10, but validation is not performed + against build hosts using WSLv2. + <note> + The Yocto Project is not compatible with WSLv1, it is + compatible but not officially supported nor validated + with WSLv2, if you still decide to use WSL please upgrade + to WSLv2. + </note> </para></listitem> <listitem><para> If you encounter problems, please go to @@ -117,7 +120,7 @@ <para> The list of packages you need on the host development system can be large when covering all build scenarios using the Yocto Project. - This section provides required packages according to + This section describes required packages according to Linux distribution and function. </para> @@ -127,19 +130,29 @@ <para> The following list shows the required packages by function given a supported Ubuntu or Debian Linux distribution: - <note> - If your build system has the - <filename>oss4-dev</filename> package installed, you - might experience QEMU build failures due to the package - installing its own custom - <filename>/usr/include/linux/soundcard.h</filename> on - the Debian system. - If you run into this situation, either of the following - solutions exist: - <literallayout class='monospaced'> + <note><title>Notes</title> + <itemizedlist> + <listitem><para> + If your build system has the + <filename>oss4-dev</filename> package installed, you + might experience QEMU build failures due to the package + installing its own custom + <filename>/usr/include/linux/soundcard.h</filename> on + the Debian system. + If you run into this situation, either of the following + solutions exist: + <literallayout class='monospaced'> $ sudo apt-get build-dep qemu $ sudo apt-get remove oss4-dev - </literallayout> + </literallayout> + </para></listitem> + <listitem><para> + For Debian-8, <filename>python3-git</filename> and <filename>pylint3</filename> are no longer available via <filename>apt-get</filename>. + <literallayout class='monospaced'> + $ sudo pip3 install GitPython pylint==1.9.5 + </literallayout> + </para></listitem> + </itemizedlist> </note> <itemizedlist> <listitem><para><emphasis>Essentials:</emphasis> @@ -205,18 +218,18 @@ </para> </section> - <section id='centos-packages'> - <title>CentOS Packages</title> + <section id='centos-7-packages'> + <title>CentOS-7 Packages</title> <para> The following list shows the required packages by function - given a supported CentOS Linux distribution: + given a supported CentOS-7 Linux distribution: <itemizedlist> <listitem><para><emphasis>Essentials:</emphasis> Packages needed to build an image for a headless system: <literallayout class='monospaced'> - $ sudo yum install &CENTOS_HOST_PACKAGES_ESSENTIAL; + $ sudo yum install &CENTOS7_HOST_PACKAGES_ESSENTIAL; </literallayout> <note><title>Notes</title> <itemizedlist> @@ -229,29 +242,81 @@ Linux by default. You need to install these packages separately. - </para></listitem> + </para></listitem> <listitem><para> The <filename>makecache</filename> command consumes additional Metadata from <filename>epel-release</filename>. - </para></listitem> + </para></listitem> </itemizedlist> </note> - </para></listitem> + </para></listitem> <listitem><para><emphasis>Documentation:</emphasis> Packages needed if you are going to build out the Yocto Project documentation manuals: <literallayout class='monospaced'> $ sudo yum install docbook-style-dsssl docbook-style-xsl \ docbook-dtds docbook-utils fop libxslt dblatex xmlto - </literallayout></para></listitem> + </literallayout> + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='centos-8-packages'> + <title>CentOS-8 Packages</title> + + <para> + The following list shows the required packages by function + given a supported CentOS-8 Linux distribution: + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo dnf install &CENTOS8_HOST_PACKAGES_ESSENTIAL; + </literallayout> + <note><title>Notes</title> + <itemizedlist> + <listitem><para> + Extra Packages for Enterprise Linux + (i.e. <filename>epel-release</filename>) + is a collection of packages from Fedora + built on RHEL/CentOS for easy installation + of packages not included in enterprise + Linux by default. + You need to install these packages + separately. + </para></listitem> + <listitem><para> + The <filename>PowerTools</filename> repo + provides additional packages such as + <filename>rpcgen</filename> and + <filename>texinfo</filename>. + </para></listitem> + <listitem><para> + The <filename>makecache</filename> command + consumes additional Metadata from + <filename>epel-release</filename>. + </para></listitem> + </itemizedlist> + </note> + </para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo dnf install docbook-style-dsssl docbook-style-xsl \ + docbook-dtds docbook-utils fop libxslt dblatex xmlto + </literallayout> + </para></listitem> </itemizedlist> </para> </section> </section> - <section id='required-git-tar-and-python-versions'> - <title>Required Git, tar, and Python Versions</title> + <section id='required-git-tar-python-and-gcc-versions'> + <title>Required Git, tar, Python and gcc Versions</title> <para> In order to use the build system, your host development system @@ -259,8 +324,8 @@ Python: <itemizedlist> <listitem><para>Git 1.8.3.1 or greater</para></listitem> - <listitem><para>tar 1.27 or greater</para></listitem> - <listitem><para>Python 3.4.0 or greater</para></listitem> + <listitem><para>tar 1.28 or greater</para></listitem> + <listitem><para>Python 3.5.0 or greater</para></listitem> </itemizedlist> </para> @@ -272,6 +337,89 @@ tarball or use BitBake to build the tarball. </para> + <para> + In addition, your host development system must meet the following + version requirement for gcc: + <itemizedlist> + <listitem><para>gcc 5.0 or greater</para></listitem> + </itemizedlist> + </para> + + <para> + If your host development system does not meet this requirement, + you can resolve this by installing a <filename>buildtools-extended</filename> + tarball that contains additional tools, the equivalent of <filename>buildtools-essential</filename>. + </para> + <section id='installing-a-pre-built-buildtools-tarball-with-install-buildtools-script'> + <title>Installing a Pre-Built <filename>buildtools</filename> Tarball with <filename>install-buildtools</filename> script</title> + + <para> + The <filename>install-buildtools</filename> script is the easiest + of the three methods by which you can get these tools. It downloads + a pre-built buildtools installer and automatically installs the tools + for you: + <orderedlist> + <listitem><para> + Execute the <filename>install-buildtools</filename> script. + Here is an example: + <literallayout class='monospaced'> + $ cd poky + $ scripts/install-buildtools --without-extended-buildtools \ + --base-url &YOCTO_DL_URL;/releases/yocto \ + --release yocto-&DISTRO; \ + --installer-version &DISTRO; + </literallayout> + <para> + During execution, the buildtools tarball will be downloaded, + the checksum of the download will be verified, the installer + will be run for you, and some basic checks will be run to + to make sure the installation is functional. + </para> + <para> + To avoid the need of <filename>sudo</filename> privileges, + the <filename>install-buildtools</filename> script will + by default tell the installer to install in: + <literallayout class='monospaced'> + <replaceable>/path/to/</replaceable>poky/buildtools + </literallayout> + </para> + <para> + If your host development system needs the additional tools + provided in the <filename>buildtools-extended</filename> + tarball, you can instead execute the + <filename>install-buildtools</filename> script with the + default parameters: + <literallayout class='monospaced'> + $ cd poky + $ scripts/install-buildtools + </literallayout> + </para> + </para></listitem> + <listitem><para> + Source the tools environment setup script by using a + command like the following: + <literallayout class='monospaced'> + $ source <replaceable>/path/to/</replaceable>poky/buildtools/environment-setup-x86_64-pokysdk-linux + </literallayout> + Of course, you need to supply your installation directory and be + sure to use the right file (i.e. i586 or x86_64). + </para> + <para> + After you have sourced the setup script, + the tools are added to <filename>PATH</filename> + and any other environment variables required to run the + tools are initialized. + The results are working versions versions of Git, tar, + Python and <filename>chrpath</filename>. And in the case of + the <filename>buildtools-extended</filename> tarball, additional + working versions of tools including <filename>gcc</filename>, + <filename>make</filename> and the other tools included in + <filename>packagegroup-core-buildessential</filename>. + </para></listitem> + </orderedlist> + </para> + </section> + <section id='downloading-a-pre-built-buildtools-tarball'> <title>Downloading a Pre-Built <filename>buildtools</filename> Tarball</title> @@ -281,14 +429,18 @@ <orderedlist> <listitem><para> Locate and download the <filename>*.sh</filename> at - <ulink url='&YOCTO_DL_URL;/releases/yocto/yocto-&DISTRO;/buildtools/'></ulink>. + <ulink url='&YOCTO_RELEASE_DL_URL;/buildtools/'></ulink>. </para></listitem> <listitem><para> Execute the installation script. - Here is an example: + Here is an example for the traditional installer: <literallayout class='monospaced'> $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh </literallayout> + Here is an example for the extended installer: + <literallayout class='monospaced'> + $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh + </literallayout> During execution, a prompt appears that allows you to choose the installation directory. For example, you could choose the following: @@ -311,7 +463,11 @@ and any other environment variables required to run the tools are initialized. The results are working versions versions of Git, tar, - Python and <filename>chrpath</filename>. + Python and <filename>chrpath</filename>. And in the case of + the <filename>buildtools-extended</filename> tarball, additional + working versions of tools including <filename>gcc</filename>, + <filename>make</filename> and the other tools included in + <filename>packagegroup-core-buildessential</filename>. </para></listitem> </orderedlist> </para> @@ -327,7 +483,7 @@ <filename>.sh</filename> file and then take steps to transfer and run it on a machine that does not meet the minimal Git, tar, and Python - requirements. + (or gcc) requirements. </para> <para> @@ -345,6 +501,10 @@ <literallayout class='monospaced'> $ bitbake buildtools-tarball </literallayout> + or run the BitBake command to build the extended tarball: + <literallayout class='monospaced'> + $ bitbake buildtools-extended-tarball + </literallayout> <note> The <link linkend='var-SDKMACHINE'><filename>SDKMACHINE</filename></link> @@ -358,21 +518,25 @@ subdirectory of the <link linkend='build-directory'>Build Directory</link>. The installer file has the string "buildtools" - in the name. + (or "buildtools-extended") in the name. </para></listitem> <listitem><para> Transfer the <filename>.sh</filename> file from the build host to the machine that does not meet the - Git, tar, or Python requirements. + Git, tar, or Python (or gcc) requirements. </para></listitem> <listitem><para> On the machine that does not meet the requirements, run the <filename>.sh</filename> file to install the tools. - Here is an example: + Here is an example for the traditional installer: <literallayout class='monospaced'> $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh </literallayout> + Here is an example for the extended installer: + <literallayout class='monospaced'> + $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh + </literallayout> During execution, a prompt appears that allows you to choose the installation directory. For example, you could choose the following: @@ -384,10 +548,10 @@ Source the tools environment setup script by using a command like the following: <literallayout class='monospaced'> - $ source /home/<replaceable>your_username</replaceable>/buildtools/environment-setup-i586-poky-linux + $ source /home/<replaceable>your_username</replaceable>/buildtools/environment-setup-x86_64-poky-linux </literallayout> Of course, you need to supply your installation directory and be - sure to use the right file (i.e. i585 or x86-64). + sure to use the right file (i.e. i586 or x86_64). </para> <para> After you have sourced the setup script, @@ -395,7 +559,11 @@ and any other environment variables required to run the tools are initialized. The results are working versions versions of Git, tar, - Python and <filename>chrpath</filename>. + Python and <filename>chrpath</filename>. And in the case of + the <filename>buildtools-extended</filename> tarball, additional + working versions of tools including <filename>gcc</filename>, + <filename>make</filename> and the other tools included in + <filename>packagegroup-core-buildessential</filename>. </para></listitem> </orderedlist> </para> |