diff options
Diffstat (limited to 'poky/documentation/ref-manual/system-requirements.rst')
| -rw-r--r-- | poky/documentation/ref-manual/system-requirements.rst | 87 |
1 files changed, 31 insertions, 56 deletions
diff --git a/poky/documentation/ref-manual/system-requirements.rst b/poky/documentation/ref-manual/system-requirements.rst index 80378cedb..e9d995c61 100644 --- a/poky/documentation/ref-manual/system-requirements.rst +++ b/poky/documentation/ref-manual/system-requirements.rst @@ -41,7 +41,7 @@ distributions: - Ubuntu 18.04 (LTS) -- Ubuntu 20.04 +- Ubuntu 20.04 (LTS) - Fedora 30 @@ -66,9 +66,8 @@ distributions: - While the Yocto Project Team attempts to ensure all Yocto Project releases are one hundred percent compatible with each officially - supported Linux distribution, instances might exist where you - encounter a problem while using the Yocto Project on a specific - distribution. + supported Linux distribution, you may still encounter problems + that happen only with a specific distribution. - Yocto Project releases are tested against the stable Linux distributions in the above list. The Yocto Project should work @@ -111,7 +110,7 @@ function. Ubuntu and Debian ----------------- -The following list shows the required packages by function given a +Here are the required packages by function given a supported Ubuntu or Debian Linux distribution: .. note:: @@ -119,9 +118,7 @@ supported Ubuntu or Debian Linux distribution: - If your build system has the ``oss4-dev`` package installed, you might experience QEMU build failures due to the package installing its own custom ``/usr/include/linux/soundcard.h`` on the Debian - system. If you run into this situation, either of the following - solutions exist: - :: + system. If you run into this situation, try either of these solutions:: $ sudo apt-get build-dep qemu $ sudo apt-get remove oss4-dev @@ -132,14 +129,12 @@ supported Ubuntu or Debian Linux distribution: $ sudo pip3 install GitPython pylint==1.9.5 -- *Essentials:* Packages needed to build an image on a headless system: - :: +- *Essentials:* Packages needed to build an image on a headless system:: $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; - *Documentation:* Packages needed if you are going to build out the - Yocto Project documentation manuals: - :: + Yocto Project documentation manuals:: $ sudo apt-get install make python3-pip &PIP3_HOST_PACKAGES_DOC; @@ -153,18 +148,16 @@ supported Ubuntu or Debian Linux distribution: Fedora Packages --------------- -The following list shows the required packages by function given a +Here are the required packages by function given a supported Fedora Linux distribution: - *Essentials:* Packages needed to build an image for a headless - system: - :: + system:: $ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL; - *Documentation:* Packages needed if you are going to build out the - Yocto Project documentation manuals: - :: + Yocto Project documentation manuals:: $ sudo dnf install make python3-pip which &PIP3_HOST_PACKAGES_DOC; @@ -172,18 +165,16 @@ supported Fedora Linux distribution: openSUSE Packages ----------------- -The following list shows the required packages by function given a +Here are the required packages by function given a supported openSUSE Linux distribution: - *Essentials:* Packages needed to build an image for a headless - system: - :: + system:: $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; - *Documentation:* Packages needed if you are going to build out the - Yocto Project documentation manuals: - :: + Yocto Project documentation manuals:: $ sudo zypper install make python3-pip which &PIP3_HOST_PACKAGES_DOC; @@ -192,12 +183,11 @@ supported openSUSE Linux distribution: CentOS-7 Packages ----------------- -The following list shows the required packages by function given a +Here are the required packages by function given a supported CentOS-7 Linux distribution: - *Essentials:* Packages needed to build an image for a headless - system: - :: + system:: $ sudo yum install &CENTOS7_HOST_PACKAGES_ESSENTIAL; @@ -212,8 +202,7 @@ supported CentOS-7 Linux distribution: ``epel-release``. - *Documentation:* Packages needed if you are going to build out the - Yocto Project documentation manuals: - :: + Yocto Project documentation manuals:: $ sudo yum install make python3-pip which &PIP3_HOST_PACKAGES_DOC; @@ -221,12 +210,11 @@ supported CentOS-7 Linux distribution: CentOS-8 Packages ----------------- -The following list shows the required packages by function given a +Here are the required packages by function given a supported CentOS-8 Linux distribution: - *Essentials:* Packages needed to build an image for a headless - system: - :: + system:: $ sudo dnf install &CENTOS8_HOST_PACKAGES_ESSENTIAL; @@ -244,8 +232,7 @@ supported CentOS-8 Linux distribution: ``epel-release``. - *Documentation:* Packages needed if you are going to build out the - Yocto Project documentation manuals: - :: + Yocto Project documentation manuals:: $ sudo dnf install make python3-pip which &PIP3_HOST_PACKAGES_DOC; @@ -287,8 +274,7 @@ The ``install-buildtools`` script is the easiest of the three methods by which you can get these tools. It downloads a pre-built buildtools installer and automatically installs the tools for you: -1. Execute the ``install-buildtools`` script. Here is an example: - :: +1. Execute the ``install-buildtools`` script. Here is an example:: $ cd poky $ scripts/install-buildtools --without-extended-buildtools \ @@ -302,22 +288,19 @@ installer and automatically installs the tools for you: installation is functional. To avoid the need of ``sudo`` privileges, the ``install-buildtools`` - script will by default tell the installer to install in: - :: + script will by default tell the installer to install in:: /path/to/poky/buildtools If your host development system needs the additional tools provided in the ``buildtools-extended`` tarball, you can instead execute the - ``install-buildtools`` script with the default parameters: - :: + ``install-buildtools`` script with the default parameters:: $ cd poky $ scripts/install-buildtools 2. Source the tools environment setup script by using a command like the - following: - :: + following:: $ source /path/to/poky/buildtools/environment-setup-x86_64-pokysdk-linux @@ -342,13 +325,11 @@ steps: 1. Locate and download the ``*.sh`` at &YOCTO_RELEASE_DL_URL;/buildtools/ 2. Execute the installation script. Here is an example for the - traditional installer: - :: + traditional installer:: $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh - Here is an example for the extended installer: - :: + Here is an example for the extended installer:: $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh @@ -357,8 +338,7 @@ steps: ``/home/your-username/buildtools`` 3. Source the tools environment setup script by using a command like the - following: - :: + following:: $ source /home/your_username/buildtools/environment-setup-i586-poky-linux @@ -390,13 +370,11 @@ installer: your build environment with the setup script (:ref:`structure-core-script`). -2. Run the BitBake command to build the tarball: - :: +2. Run the BitBake command to build the tarball:: $ bitbake buildtools-tarball - or run the BitBake command to build the extended tarball: - :: + or run the BitBake command to build the extended tarball:: $ bitbake buildtools-extended-tarball @@ -415,13 +393,11 @@ installer: 4. On the machine that does not meet the requirements, run the ``.sh`` file to install the tools. Here is an example for the traditional - installer: - :: + installer:: $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh - Here is an example for the extended installer: - :: + Here is an example for the extended installer:: $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh @@ -430,8 +406,7 @@ installer: ``/home/your_username/buildtools`` 5. Source the tools environment setup script by using a command like the - following: - :: + following:: $ source /home/your_username/buildtools/environment-setup-x86_64-poky-linux |