summaryrefslogtreecommitdiff
path: root/poky/documentation/ref-manual/system-requirements.rst
diff options
context:
space:
mode:
Diffstat (limited to 'poky/documentation/ref-manual/system-requirements.rst')
-rw-r--r--poky/documentation/ref-manual/system-requirements.rst69
1 files changed, 23 insertions, 46 deletions
diff --git a/poky/documentation/ref-manual/system-requirements.rst b/poky/documentation/ref-manual/system-requirements.rst
index 80378cedb..4fa4d3ef5 100644
--- a/poky/documentation/ref-manual/system-requirements.rst
+++ b/poky/documentation/ref-manual/system-requirements.rst
@@ -120,8 +120,7 @@ supported Ubuntu or Debian Linux distribution:
might experience QEMU build failures due to the package installing
its own custom ``/usr/include/linux/soundcard.h`` on the Debian
system. If you run into this situation, either of the following
- solutions exist:
- ::
+ solutions exist::
$ sudo apt-get build-dep qemu
$ sudo apt-get remove oss4-dev
@@ -132,14 +131,12 @@ supported Ubuntu or Debian Linux distribution:
$ sudo pip3 install GitPython pylint==1.9.5
-- *Essentials:* Packages needed to build an image on a headless system:
- ::
+- *Essentials:* Packages needed to build an image on a headless system::
$ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL;
- *Documentation:* Packages needed if you are going to build out the
- Yocto Project documentation manuals:
- ::
+ Yocto Project documentation manuals::
$ sudo apt-get install make python3-pip
&PIP3_HOST_PACKAGES_DOC;
@@ -157,14 +154,12 @@ The following list shows the required packages by function given a
supported Fedora Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
- system:
- ::
+ system::
$ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL;
- *Documentation:* Packages needed if you are going to build out the
- Yocto Project documentation manuals:
- ::
+ Yocto Project documentation manuals::
$ sudo dnf install make python3-pip which
&PIP3_HOST_PACKAGES_DOC;
@@ -176,14 +171,12 @@ The following list shows the required packages by function given a
supported openSUSE Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
- system:
- ::
+ system::
$ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL;
- *Documentation:* Packages needed if you are going to build out the
- Yocto Project documentation manuals:
- ::
+ Yocto Project documentation manuals::
$ sudo zypper install make python3-pip which
&PIP3_HOST_PACKAGES_DOC;
@@ -196,8 +189,7 @@ The following list shows the required packages by function given a
supported CentOS-7 Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
- system:
- ::
+ system::
$ sudo yum install &CENTOS7_HOST_PACKAGES_ESSENTIAL;
@@ -212,8 +204,7 @@ supported CentOS-7 Linux distribution:
``epel-release``.
- *Documentation:* Packages needed if you are going to build out the
- Yocto Project documentation manuals:
- ::
+ Yocto Project documentation manuals::
$ sudo yum install make python3-pip which
&PIP3_HOST_PACKAGES_DOC;
@@ -225,8 +216,7 @@ The following list shows the required packages by function given a
supported CentOS-8 Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
- system:
- ::
+ system::
$ sudo dnf install &CENTOS8_HOST_PACKAGES_ESSENTIAL;
@@ -244,8 +234,7 @@ supported CentOS-8 Linux distribution:
``epel-release``.
- *Documentation:* Packages needed if you are going to build out the
- Yocto Project documentation manuals:
- ::
+ Yocto Project documentation manuals::
$ sudo dnf install make python3-pip which
&PIP3_HOST_PACKAGES_DOC;
@@ -287,8 +276,7 @@ The ``install-buildtools`` script is the easiest of the three methods by
which you can get these tools. It downloads a pre-built buildtools
installer and automatically installs the tools for you:
-1. Execute the ``install-buildtools`` script. Here is an example:
- ::
+1. Execute the ``install-buildtools`` script. Here is an example::
$ cd poky
$ scripts/install-buildtools --without-extended-buildtools \
@@ -302,22 +290,19 @@ installer and automatically installs the tools for you:
installation is functional.
To avoid the need of ``sudo`` privileges, the ``install-buildtools``
- script will by default tell the installer to install in:
- ::
+ script will by default tell the installer to install in::
/path/to/poky/buildtools
If your host development system needs the additional tools provided
in the ``buildtools-extended`` tarball, you can instead execute the
- ``install-buildtools`` script with the default parameters:
- ::
+ ``install-buildtools`` script with the default parameters::
$ cd poky
$ scripts/install-buildtools
2. Source the tools environment setup script by using a command like the
- following:
- ::
+ following::
$ source /path/to/poky/buildtools/environment-setup-x86_64-pokysdk-linux
@@ -342,13 +327,11 @@ steps:
1. Locate and download the ``*.sh`` at &YOCTO_RELEASE_DL_URL;/buildtools/
2. Execute the installation script. Here is an example for the
- traditional installer:
- ::
+ traditional installer::
$ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh
- Here is an example for the extended installer:
- ::
+ Here is an example for the extended installer::
$ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh
@@ -357,8 +340,7 @@ steps:
``/home/your-username/buildtools``
3. Source the tools environment setup script by using a command like the
- following:
- ::
+ following::
$ source /home/your_username/buildtools/environment-setup-i586-poky-linux
@@ -390,13 +372,11 @@ installer:
your build environment with the setup script
(:ref:`structure-core-script`).
-2. Run the BitBake command to build the tarball:
- ::
+2. Run the BitBake command to build the tarball::
$ bitbake buildtools-tarball
- or run the BitBake command to build the extended tarball:
- ::
+ or run the BitBake command to build the extended tarball::
$ bitbake buildtools-extended-tarball
@@ -415,13 +395,11 @@ installer:
4. On the machine that does not meet the requirements, run the ``.sh``
file to install the tools. Here is an example for the traditional
- installer:
- ::
+ installer::
$ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh
- Here is an example for the extended installer:
- ::
+ Here is an example for the extended installer::
$ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh
@@ -430,8 +408,7 @@ installer:
``/home/your_username/buildtools``
5. Source the tools environment setup script by using a command like the
- following:
- ::
+ following::
$ source /home/your_username/buildtools/environment-setup-x86_64-poky-linux
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-03 15:40:52 +0300