diff options
Diffstat (limited to 'yocto-poky/documentation/kernel-dev/kernel-dev-examples.xml')
-rw-r--r-- | yocto-poky/documentation/kernel-dev/kernel-dev-examples.xml | 918 |
1 files changed, 918 insertions, 0 deletions
diff --git a/yocto-poky/documentation/kernel-dev/kernel-dev-examples.xml b/yocto-poky/documentation/kernel-dev/kernel-dev-examples.xml new file mode 100644 index 000000000..9d9aef6d0 --- /dev/null +++ b/yocto-poky/documentation/kernel-dev/kernel-dev-examples.xml @@ -0,0 +1,918 @@ +<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" +[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] > + +<chapter id='kernel-how-to'> + +<title>Working with the Yocto Project Kernel</title> + + +<section id='actions-org'> + <title>Introduction</title> + <para> + This chapter describes how to accomplish tasks involving a kernel's tree structure. + The information is designed to help the developer that wants to modify the Yocto + Project kernel and contribute changes upstream to the Yocto Project. + The information covers the following: + <itemizedlist> + <listitem><para>Tree construction</para></listitem> + <listitem><para>Build strategies</para></listitem> + <listitem><para>Workflow examples</para></listitem> + </itemizedlist> + </para> +</section> + + <section id='tree-construction'> + <title>Tree Construction</title> + <para> + This section describes construction of the Yocto Project kernel source repositories + as accomplished by the Yocto Project team to create kernel repositories. + These kernel repositories are found under the heading "Yocto Linux Kernel" at + <ulink url='&YOCTO_GIT_URL;/cgit.cgi'>&YOCTO_GIT_URL;/cgit.cgi</ulink> + and can be shipped as part of a Yocto Project release. + The team creates these repositories by + compiling and executing the set of feature descriptions for every BSP/feature + in the product. + Those feature descriptions list all necessary patches, + configuration, branching, tagging and feature divisions found in a kernel. + Thus, the Yocto Project kernel repository (or tree) is built. + </para> + <para> + The existence of this tree allows you to access and clone a particular + Yocto Project kernel repository and use it to build images based on their configurations + and features. + </para> + <para> + You can find the files used to describe all the valid features and BSPs + in the Yocto Project kernel in any clone of the Yocto Project kernel source repository + Git tree. + For example, the following command clones the Yocto Project baseline kernel that + branched off of <filename>linux.org</filename> version 3.4: + <literallayout class='monospaced'> + $ git clone git://git.yoctoproject.org/linux-yocto-3.4 + </literallayout> + For another example of how to set up a local Git repository of the Yocto Project + kernel files, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#local-kernel-files'>Yocto Project Kernel</ulink>" bulleted + item in the Yocto Project Development Manual. + </para> + <para> + Once you have cloned the kernel Git repository on your local machine, you can + switch to the <filename>meta</filename> branch within the repository. + Here is an example that assumes the local Git repository for the kernel is in + a top-level directory named <filename>linux-yocto-3.4</filename>: + <literallayout class='monospaced'> + $ cd ~/linux-yocto-3.4 + $ git checkout -b meta origin/meta + </literallayout> + Once you have checked out and switched to the <filename>meta</filename> branch, + you can see a snapshot of all the kernel configuration and feature descriptions that are + used to build that particular kernel repository. + These descriptions are in the form of <filename>.scc</filename> files. + </para> + <para> + You should realize, however, that browsing your local kernel repository + for feature descriptions and patches is not an effective way to determine what is in a + particular kernel branch. + Instead, you should use Git directly to discover the changes in a branch. + Using Git is an efficient and flexible way to inspect changes to the kernel. + For examples showing how to use Git to inspect kernel commits, see the following sections + in this chapter. + <note> + Ground up reconstruction of the complete kernel tree is an action only taken by the + Yocto Project team during an active development cycle. + When you create a clone of the kernel Git repository, you are simply making it + efficiently available for building and development. + </note> + </para> + <para> + The following steps describe what happens when the Yocto Project Team constructs + the Yocto Project kernel source Git repository (or tree) found at + <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink> given the + introduction of a new top-level kernel feature or BSP. + These are the actions that effectively create the tree + that includes the new feature, patch or BSP: + <orderedlist> + <listitem><para>A top-level kernel feature is passed to the kernel build subsystem. + Normally, this feature is a BSP for a particular kernel type.</para></listitem> + <listitem><para>The file that describes the top-level feature is located by searching + these system directories: + <itemizedlist> + <listitem><para>The in-tree kernel-cache directories, which are located + in <filename>meta/cfg/kernel-cache</filename></para></listitem> + <listitem><para>Areas pointed to by <filename>SRC_URI</filename> statements + found in recipes</para></listitem> + </itemizedlist> + For a typical build, the target of the search is a + feature description in an <filename>.scc</filename> file + whose name follows this format: + <literallayout class='monospaced'> + <bsp_name>-<kernel_type>.scc + </literallayout> + </para></listitem> + <listitem><para>Once located, the feature description is either compiled into a simple script + of actions, or into an existing equivalent script that is already part of the + shipped kernel.</para></listitem> + <listitem><para>Extra features are appended to the top-level feature description. + These features can come from the + <ulink url='&YOCTO_DOCS_REF_URL;#var-KERNEL_FEATURES'><filename>KERNEL_FEATURES</filename></ulink> + variable in recipes.</para></listitem> + <listitem><para>Each extra feature is located, compiled and appended to the script + as described in step three.</para></listitem> + <listitem><para>The script is executed to produce a series of <filename>meta-*</filename> + directories. + These directories are descriptions of all the branches, tags, patches and configurations that + need to be applied to the base Git repository to completely create the + source (build) branch for the new BSP or feature.</para></listitem> + <listitem><para>The base repository is cloned, and the actions + listed in the <filename>meta-*</filename> directories are applied to the + tree.</para></listitem> + <listitem><para>The Git repository is left with the desired branch checked out and any + required branching, patching and tagging has been performed.</para></listitem> + </orderedlist> + </para> + <para> + The kernel tree is now ready for developer consumption to be locally cloned, + configured, and built into a Yocto Project kernel specific to some target hardware. + <note><para>The generated <filename>meta-*</filename> directories add to the kernel + as shipped with the Yocto Project release. + Any add-ons and configuration data are applied to the end of an existing branch. + The full repository generation that is found in the + official Yocto Project kernel repositories at + <ulink url='&YOCTO_GIT_URL;/cgit.cgi'>http://git.yoctoproject.org/cgit.cgi</ulink> + is the combination of all supported boards and configurations.</para> + <para>The technique the Yocto Project team uses is flexible and allows for seamless + blending of an immutable history with additional patches specific to a + deployment. + Any additions to the kernel become an integrated part of the branches.</para> + </note> + </para> + </section> + + <section id='build-strategy'> + <title>Build Strategy</title> + <para> + Once a local Git repository of the Yocto Project kernel exists on a development system, + you can consider the compilation phase of kernel development - building a kernel image. + Some prerequisites exist that are validated by the build process before compilation + starts: + </para> + + <itemizedlist> + <listitem><para>The + <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink> points + to the kernel Git repository.</para></listitem> + <listitem><para>A BSP build branch exists. + This branch has the following form: + <literallayout class='monospaced'> + <kernel_type>/<bsp_name> + </literallayout></para></listitem> + </itemizedlist> + + <para> + The OpenEmbedded build system makes sure these conditions exist before attempting compilation. + Other means, however, do exist, such as as bootstrapping a BSP, see + the "<link linkend='workflow-examples'>Workflow Examples</link>". + </para> + + <para> + Before building a kernel, the build process verifies the tree + and configures the kernel by processing all of the + configuration "fragments" specified by feature descriptions in the <filename>.scc</filename> + files. + As the features are compiled, associated kernel configuration fragments are noted + and recorded in the <filename>meta-*</filename> series of directories in their compilation order. + The fragments are migrated, pre-processed and passed to the Linux Kernel + Configuration subsystem (<filename>lkc</filename>) as raw input in the form + of a <filename>.config</filename> file. + The <filename>lkc</filename> uses its own internal dependency constraints to do the final + processing of that information and generates the final <filename>.config</filename> file + that is used during compilation. + </para> + + <para> + Using the board's architecture and other relevant values from the board's template, + kernel compilation is started and a kernel image is produced. + </para> + + <para> + The other thing that you notice once you configure a kernel is that + the build process generates a build tree that is separate from your kernel's local Git + source repository tree. + This build tree has a name that uses the following form, where + <filename>${MACHINE}</filename> is the metadata name of the machine (BSP) and "kernel_type" is one + of the Yocto Project supported kernel types (e.g. "standard"): + <literallayout class='monospaced'> + linux-${MACHINE}-<kernel_type>-build + </literallayout> + </para> + + <para> + The existing support in the <filename>kernel.org</filename> tree achieves this + default functionality. + </para> + + <para> + This behavior means that all the generated files for a particular machine or BSP are now in + the build tree directory. + The files include the final <filename>.config</filename> file, all the <filename>.o</filename> + files, the <filename>.a</filename> files, and so forth. + Since each machine or BSP has its own separate build directory in its own separate branch + of the Git repository, you can easily switch between different builds. + </para> + </section> + + <section id='workflow-examples'> + <title>Workflow Examples</title> + + <para> + As previously noted, the Yocto Project kernel has built-in Git integration. + However, these utilities are not the only way to work with the kernel repository. + The Yocto Project has not made changes to Git or to other tools that + would invalidate alternate workflows. + Additionally, the way the kernel repository is constructed results in using + only core Git functionality, thus allowing any number of tools or front ends to use the + resulting tree. + </para> + + <para> + This section contains several workflow examples. + Many of the examples use Git commands. + You can find Git documentation at + <ulink url='http://git-scm.com/documentation'></ulink>. + You can find a simple overview of using Git with the Yocto Project in the + "<ulink url='&YOCTO_DOCS_DEV_URL;#git'>Git</ulink>" + section of the Yocto Project Development Manual. + </para> + + <section id='change-inspection-kernel-changes-commits'> + <title>Change Inspection: Changes/Commits</title> + + <para> + A common question when working with a kernel is: + "What changes have been applied to this tree?" + </para> + + <para> + In projects that have a collection of directories that + contain patches to the kernel, it is possible to inspect or "grep" the contents + of the directories to get a general feel for the changes. + This sort of patch inspection is not an efficient way to determine what has been + done to the kernel. + The reason it is inefficient is because there are many optional patches that are + selected based on the kernel type and the feature description. + Additionally, patches could exist in directories that are not included in the search. + </para> + + <para> + A more efficient way to determine what has changed in the branch is to use + Git and inspect or search the kernel tree. + This method gives you a full view of not only the source code modifications, + but also provides the reasons for the changes. + </para> + + <section id='what-changed-in-a-kernel'> + <title>What Changed in a Kernel?</title> + + <para> + Following are a few examples that show how to use Git commands to examine changes. + Because Git repositories in the Yocto Project do not break existing Git + functionality, and because there exists many permutations of these types of + Git commands, many methods exist by which you can discover changes. + <note> + In the following examples, unless you provide a commit range, + <filename>kernel.org</filename> history is blended with Yocto Project + kernel changes. + You can form ranges by using branch names from the kernel tree as the + upper and lower commit markers with the Git commands. + You can see the branch names through the web interface to the + Yocto Project source repositories at + <ulink url='http://git.yoctoproject.org/cgit.cgi'></ulink>. + For example, the branch names for the <filename>linux-yocto-3.4</filename> + kernel repository can be seen at + <ulink url='http://git.yoctoproject.org/cgit.cgi/linux-yocto-3.4/refs/heads'></ulink>. + </note> + To see a full range of the changes, use the + <filename>git whatchanged</filename> command and specify a commit range + for the branch (<filename><commit>..<commit></filename>). + </para> + + <para> + Here is an example that looks at what has changed in the + <filename>emenlow</filename> branch of the + <filename>linux-yocto-3.4</filename> kernel. + The lower commit range is the commit associated with the + <filename>standard/base</filename> branch, while + the upper commit range is the commit associated with the + <filename>standard/emenlow</filename> branch. + <literallayout class='monospaced'> + $ git whatchanged origin/standard/base..origin/standard/emenlow + </literallayout> + </para> + + <para> + To see a summary of changes use the <filename>git log</filename> command. + Here is an example using the same branches: + <literallayout class='monospaced'> + $ git log --oneline origin/standard/base..origin/standard/emenlow + </literallayout> + The <filename>git log</filename> output might be more useful than + the <filename>git whatchanged</filename> as you get + a short, one-line summary of each change and not the entire commit. + </para> + + <para> + If you want to see code differences associated with all the changes, use + the <filename>git diff</filename> command. + Here is an example: + <literallayout class='monospaced'> + $ git diff origin/standard/base..origin/standard/emenlow + </literallayout> + </para> + + <para> + You can see the commit log messages and the text differences using the + <filename>git show</filename> command: + Here is an example: + <literallayout class='monospaced'> + $ git show origin/standard/base..origin/standard/emenlow + </literallayout> + </para> + + <para> + You can create individual patches for each change by using the + <filename>git format-patch</filename> command. + Here is an example that that creates patch files for each commit and + places them in your <filename>Documents</filename> directory: + <literallayout class='monospaced'> + $ git format-patch -o $HOME/Documents origin/standard/base..origin/standard/emenlow + </literallayout> + </para> + </section> + + <section id='show-a-particular-feature-or-branch-change'> + <title>Show a Particular Feature or Branch Change</title> + + <para> + Developers use tags in the Yocto Project kernel tree to divide changes for significant + features or branches. + Once you know a particular tag, you can use Git commands + to show changes associated with the tag and find the branches that contain + the feature. + <note> + Because BSP branch, <filename>kernel.org</filename>, and feature tags are all + present, there could be many tags. + </note> + The <filename>git show <tag></filename> command shows changes that are tagged by + a feature. + Here is an example that shows changes tagged by the <filename>systemtap</filename> + feature: + <literallayout class='monospaced'> + $ git show systemtap + </literallayout> + You can use the <filename>git branch --contains <tag></filename> command + to show the branches that contain a particular feature. + This command shows the branches that contain the <filename>systemtap</filename> + feature: + <literallayout class='monospaced'> + $ git branch --contains systemtap + </literallayout> + </para> + + <para> + You can use many other comparisons to isolate BSP and kernel changes. + For example, you can compare against <filename>kernel.org</filename> tags + such as the <filename>v3.4</filename> tag. + </para> + </section> + </section> + + <section id='development-saving-kernel-modifications'> + <title>Development: Saving Kernel Modifications</title> + + <para> + Another common operation is to build a BSP supplied by the Yocto Project, make some + changes, rebuild, and then test. + Those local changes often need to be exported, shared or otherwise maintained. + </para> + + <para> + Since the Yocto Project kernel source tree is backed by Git, this activity is + much easier as compared to with previous releases. + Because Git tracks file modifications, additions and deletions, it is easy + to modify the code and later realize that you need to save the changes. + It is also easy to determine what has changed. + This method also provides many tools to commit, undo and export those modifications. + </para> + + <para> + This section and its sub-sections, describe general application of Git's + <filename>push</filename> and <filename>pull</filename> commands, which are used to + get your changes upstream or source your code from an upstream repository. + The Yocto Project provides scripts that help you work in a collaborative development + environment. + For information on these scripts, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#pushing-a-change-upstream'>Using Scripts to Push a Change + Upstream and Request a Pull</ulink>" and + "<ulink url='&YOCTO_DOCS_DEV_URL;#submitting-a-patch'>Using Email to Submit a Patch</ulink>" + sections in the Yocto Project Development Manual. + </para> + + <para> + There are many ways to save kernel modifications. + The technique employed + depends on the destination for the patches: + + <itemizedlist> + <listitem><para>Bulk storage</para></listitem> + <listitem><para>Internal sharing either through patches or by using Git</para></listitem> + <listitem><para>External submissions</para></listitem> + <listitem><para>Exporting for integration into another Source Code + Manager (SCM)</para></listitem> + </itemizedlist> + </para> + + <para> + Because of the following list of issues, the destination of the patches also influences + the method for gathering them: + + <itemizedlist> + <listitem><para>Bisectability</para></listitem> + <listitem><para>Commit headers</para></listitem> + <listitem><para>Division of subsystems for separate submission or review</para></listitem> + </itemizedlist> + </para> + + <section id='bulk-export'> + <title>Bulk Export</title> + + <para> + This section describes how you can "bulk" export changes that have not + been separated or divided. + This situation works well when you are simply storing patches outside of the kernel + source repository, either permanently or temporarily, and you are not committing + incremental changes during development. + <note> + This technique is not appropriate for full integration of upstream submission + because changes are not properly divided and do not provide an avenue for per-change + commit messages. + Therefore, this example assumes that changes have not been committed incrementally + during development and that you simply must gather and export them. + </note> + <literallayout class='monospaced'> + # bulk export of ALL modifications without separation or division + # of the changes + + $ git add . + $ git commit -s -a -m <msg> + or + $ git commit -s -a # and interact with $EDITOR + </literallayout> + </para> + + <para> + The previous operations capture all the local changes in the project source + tree in a single Git commit. + And, that commit is also stored in the project's source tree. + </para> + + <para> + Once the changes are exported, you can restore them manually using a template + or through integration with the <filename>default_kernel</filename>. + </para> + + </section> + + <section id='incremental-planned-sharing'> + <title>Incremental/Planned Sharing</title> + + <para> + This section describes how to save modifications when you are making incremental + commits or practicing planned sharing. + The examples in this section assume that you have incrementally committed + changes to the tree during development and now need to export them. + The sections that follow + describe how you can export your changes internally through either patches or by + using Git commands. + </para> + + <para> + During development, the following commands are of interest. + For full Git documentation, refer to the Git documentation at + <ulink url='http://github.com'></ulink>. + + <literallayout class='monospaced'> + # edit a file + $ vi <path>/file + # stage the change + $ git add <path>/file + # commit the change + $ git commit -s + # remove a file + $ git rm <path>/file + # commit the change + $ git commit -s + + ... etc. + </literallayout> + </para> + + <para> + Distributed development with Git is possible when you use a universally + agreed-upon unique commit identifier (set by the creator of the commit) that maps to a + specific change set with a specific parent. + This identifier is created for you when + you create a commit, and is re-created when you amend, alter or re-apply + a commit. + As an individual in isolation, this is of no interest. + However, if you + intend to share your tree with normal Git <filename>push</filename> and + <filename>pull</filename> operations for + distributed development, you should consider the ramifications of changing a + commit that you have already shared with others. + </para> + + <para> + Assuming that the changes have not been pushed upstream, or pulled into + another repository, you can update both the commit content and commit messages + associated with development by using the following commands: + + <literallayout class='monospaced'> + $ Git add <path>/file + $ Git commit --amend + $ Git rebase or Git rebase -i + </literallayout> + </para> + + <para> + Again, assuming that the changes have not been pushed upstream, and that + no pending works-in-progress exist (use <filename>git status</filename> to check), then + you can revert (undo) commits by using the following commands: + + <literallayout class='monospaced'> + # remove the commit, update working tree and remove all + # traces of the change + $ git reset --hard HEAD^ + # remove the commit, but leave the files changed and staged for re-commit + $ git reset --soft HEAD^ + # remove the commit, leave file change, but not staged for commit + $ git reset --mixed HEAD^ + </literallayout> + </para> + + <para> + You can create branches, "cherry-pick" changes, or perform any number of Git + operations until the commits are in good order for pushing upstream + or for pull requests. + After a <filename>push</filename> or <filename>pull</filename> command, + commits are normally considered + "permanent" and you should not modify them. + If the commits need to be changed, you can incrementally do so with new commits. + These practices follow standard Git workflow and the <filename>kernel.org</filename> best + practices, which is recommended. + <note> + It is recommended to tag or branch before adding changes to a Yocto Project + BSP or before creating a new one. + The reason for this recommendation is because the branch or tag provides a + reference point to facilitate locating and exporting local changes. + </note> + </para> + + <section id='export-internally-via-patches'> + <title>Exporting Changes Internally by Using Patches</title> + + <para> + This section describes how you can extract committed changes from a working directory + by exporting them as patches. + Once the changes have been extracted, you can use the patches for upstream submission, + place them in a Yocto Project template for automatic kernel patching, + or apply them in many other common uses. + </para> + + <para> + This example shows how to create a directory with sequentially numbered patches. + Once the directory is created, you can apply it to a repository using the + <filename>git am</filename> command to reproduce the original commit and all + the related information such as author, date, commit log, and so forth. + <note> + The new commit identifiers (ID) will be generated upon re-application. + This action reflects that the commit is now applied to an underlying commit + with a different ID. + </note> + <literallayout class='monospaced'> + # <first-commit> can be a tag if one was created before development + # began. It can also be the parent branch if a branch was created + # before development began. + + $ git format-patch -o <dir> <first commit>..<last commit> + </literallayout> + </para> + + <para> + In other words: + <literallayout class='monospaced'> + # Identify commits of interest. + + # If the tree was tagged before development + $ git format-patch -o <save dir> <tag> + + # If no tags are available + $ git format-patch -o <save dir> HEAD^ # last commit + $ git format-patch -o <save dir> HEAD^^ # last 2 commits + $ git whatchanged # identify last commit + $ git format-patch -o <save dir> <commit id> + $ git format-patch -o <save dir> <rev-list> + </literallayout> + </para> + </section> + + <section id='export-internally-via-git'> + <title>Exporting Changes Internally by Using Git</title> + + <para> + This section describes how you can export changes from a working directory + by pushing the changes into a master repository or by making a pull request. + Once you have pushed the changes to the master repository, you can then + pull those same changes into a new kernel build at a later time. + </para> + + <para> + Use this command form to push the changes: + <literallayout class='monospaced'> + $ git push ssh://<master_server>/<path_to_repo> + <local_branch>:<remote_branch> + </literallayout> + </para> + + <para> + For example, the following command pushes the changes from your local branch + <filename>yocto/standard/common-pc/base</filename> to the remote branch with the same name + in the master repository <filename>//git.mycompany.com/pub/git/kernel-3.4</filename>. + <literallayout class='monospaced'> + $ git push ssh://git.mycompany.com/pub/git/kernel-3.4 \ + yocto/standard/common-pc/base:yocto/standard/common-pc/base + </literallayout> + </para> + + <para> + A pull request entails using the <filename>git request-pull</filename> command to compose + an email to the + maintainer requesting that a branch be pulled into the master repository, see + <ulink url='http://github.com/guides/pull-requests'></ulink> for an example. + <note> + Other commands such as <filename>git stash</filename> or branching can also be used to save + changes, but are not covered in this document. + </note> + </para> + </section> + </section> + + <section id='export-for-external-upstream-submission'> + <title>Exporting Changes for External (Upstream) Submission</title> + + <para> + This section describes how to export changes for external upstream submission. + If the patch series is large or the maintainer prefers to pull + changes, you can submit these changes by using a pull request. + However, it is common to send patches as an email series. + This method allows easy review and integration of the changes. + <note> + Before sending patches for review be sure you understand the + community standards for submitting and documenting changes and follow their best practices. + For example, kernel patches should follow standards such as: + <itemizedlist> + <listitem><para> + <ulink url='http://linux.yyz.us/patch-format.html'></ulink></para></listitem> + <listitem><para>Documentation/SubmittingPatches (in any linux + kernel source tree)</para></listitem> + </itemizedlist> + </note> + </para> + + <para> + The messages used to commit changes are a large part of these standards. + Consequently, be sure that the headers for each commit have the required information. + For information on how to follow the Yocto Project commit message standards, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#how-to-submit-a-change'>How to Submit a + Change</ulink>" section in the Yocto Project Development Manual. + </para> + + <para> + If the initial commits were not properly documented or do not meet those standards, + you can re-base by using the <filename>git rebase -i</filename> command to + manipulate the commits and + get them into the required format. + Other techniques such as branching and cherry-picking commits are also viable options. + </para> + + <para> + Once you complete the commits, you can generate the email that sends the patches + to the maintainer(s) or lists that review and integrate changes. + The command <filename>git send-email</filename> is commonly used to ensure + that patches are properly + formatted for easy application and avoid mailer-induced patch damage. + </para> + + <para> + The following is an example of dumping patches for external submission: + <literallayout class='monospaced'> + # dump the last 4 commits + $ git format-patch --thread -n -o ~/rr/ HEAD^^^^ + $ git send-email --compose --subject '[RFC 0/N] <patch series summary>' \ + --to foo@yoctoproject.org --to bar@yoctoproject.org \ + --cc list@yoctoproject.org ~/rr + # the editor is invoked for the 0/N patch, and when complete the entire + # series is sent via email for review + </literallayout> + </para> + </section> + + <section id='export-for-import-into-other-scm'> + <title>Exporting Changes for Import into Another SCM</title> + + <para> + When you want to export changes for import into another + Source Code Manager (SCM), you can use any of the previously discussed + techniques. + However, if the patches are manually applied to a secondary tree and then + that tree is checked into the SCM, you can lose change information such as + commit logs. + This process is not recommended. + </para> + + <para> + Many SCMs can directly import Git commits, or can translate Git patches so that + information is not lost. + Those facilities are SCM-dependent and you should use them whenever possible. + </para> + </section> + </section> + + <section id='scm-working-with-the-yocto-project-kernel-in-another-scm'> + <title>Working with the Yocto Project Kernel in Another SCM</title> + + <para> + This section describes kernel development in an SCM other than Git, + which is not the same as exporting changes to another SCM described earlier. + For this scenario, you use the OpenEmbedded build system to + develop the kernel in a different SCM. + The following must be true for you to accomplish this: + <itemizedlist> + <listitem><para>The delivered Yocto Project kernel must be exported into the second + SCM.</para></listitem> + <listitem><para>Development must be exported from that secondary SCM into a + format that can be used by the OpenEmbedded build system.</para></listitem> + </itemizedlist> + </para> + + <section id='exporting-delivered-kernel-to-scm'> + <title>Exporting the Delivered Kernel to the SCM</title> + + <para> + Depending on the SCM, it might be possible to export the entire Yocto Project + kernel Git repository, branches and all, into a new environment. + This method is preferred because it has the most flexibility and potential to maintain + the meta data associated with each commit. + </para> + + <para> + When a direct import mechanism is not available, it is still possible to + export a branch (or series of branches) and check them into a new repository. + </para> + + <para> + The following commands illustrate some of the steps you could use to + import the <filename>yocto/standard/common-pc/base</filename> + kernel into a secondary SCM: + <literallayout class='monospaced'> + $ git checkout yocto/standard/common-pc/base + $ cd .. ; echo linux/.git > .cvsignore + $ cvs import -m "initial import" linux MY_COMPANY start + </literallayout> + </para> + + <para> + You could now relocate the CVS repository and use it in a centralized manner. + </para> + + <para> + The following commands illustrate how you can condense and merge two BSPs into a + second SCM: + <literallayout class='monospaced'> + $ git checkout yocto/standard/common-pc/base + $ git merge yocto/standard/common-pc-64/base + # resolve any conflicts and commit them + $ cd .. ; echo linux/.git > .cvsignore + $ cvs import -m "initial import" linux MY_COMPANY start + </literallayout> + </para> + </section> + + <section id='importing-changes-for-build'> + <title>Importing Changes for the Build</title> + + <para> + Once development has reached a suitable point in the second development + environment, you need to export the changes as patches. + To export them, place the changes in a recipe and + automatically apply them to the kernel during patching. + </para> + </section> + </section> + + <section id='bsp-creating'> + <title>Creating a BSP Based on an Existing Similar BSP</title> + + <para> + This section overviews the process of creating a BSP based on an + existing similar BSP. + The information is introductory in nature and does not provide step-by-step examples. + For detailed information on how to create a new BSP, see + the "<ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'>Creating a New BSP Layer Using the yocto-bsp Script</ulink>" section in the + Yocto Project Board Support Package (BSP) Developer's Guide, or see the + <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_creating_one_generic_Atom_BSP_from_another'>Transcript:_creating_one_generic_Atom_BSP_from_another</ulink> + wiki page. + </para> + + <para> + The basic steps you need to follow are: + <orderedlist> + <listitem><para><emphasis>Make sure you have set up a local Source Directory:</emphasis> + You must create a local + <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink> + by either creating a Git repository (recommended) or + extracting a Yocto Project release tarball.</para></listitem> + <listitem><para><emphasis>Choose an existing BSP available with the Yocto Project:</emphasis> + Try to map your board features as closely to the features of a BSP that is + already supported and exists in the Yocto Project. + Starting with something as close as possible to your board makes developing + your BSP easier. + You can find all the BSPs that are supported and ship with the Yocto Project + on the Yocto Project's Download page at + <ulink url='&YOCTO_HOME_URL;/download'></ulink>.</para></listitem> + <listitem><para><emphasis>Be sure you have the Base BSP:</emphasis> + You need to either have a local Git repository of the base BSP set up or + have downloaded and extracted the files from a release BSP tarball. + Either method gives you access to the BSP source files.</para></listitem> + <listitem><para><emphasis>Make a copy of the existing BSP, thus isolating your new + BSP work:</emphasis> + Copying the existing BSP file structure gives you a new area in which to work.</para></listitem> + <listitem><para><emphasis>Make configuration and recipe changes to your new BSP:</emphasis> + Configuration changes involve the files in the BSP's <filename>conf</filename> + directory. + Changes include creating a machine-specific configuration file and editing the + <filename>layer.conf</filename> file. + The configuration changes identify the kernel you will be using. + Recipe changes include removing, modifying, or adding new recipe files that + instruct the build process on what features to include in the image.</para></listitem> + <listitem><para><emphasis>Prepare for the build:</emphasis> + Before you actually initiate the build, you need to set up the build environment + by sourcing the environment initialization script. + After setting up the environment, you need to make some build configuration + changes to the <filename>local.conf</filename> and <filename>bblayers.conf</filename> + files.</para></listitem> + <listitem><para><emphasis>Build the image:</emphasis> + The OpenEmbedded build system uses BitBake to create the image. + You need to decide on the type of image you are going to build (e.g. minimal, base, + core, sato, and so forth) and then start the build using the <filename>bitbake</filename> + command.</para></listitem> + </orderedlist> + </para> + </section> + + <section id='tip-dirty-string'> + <title>"-dirty" String</title> + + <para> + If kernel images are being built with "-dirty" on the end of the version + string, this simply means that modifications in the source + directory have not been committed. + <literallayout class='monospaced'> + $ git status + </literallayout> + </para> + + <para> + You can use the above Git command to report modified, removed, or added files. + You should commit those changes to the tree regardless of whether they will be saved, + exported, or used. + Once you commit the changes you need to rebuild the kernel. + </para> + + <para> + To brute force pickup and commit all such pending changes, enter the following: + <literallayout class='monospaced'> + $ git add . + $ git commit -s -a -m "getting rid of -dirty" + </literallayout> + </para> + + <para> + Next, rebuild the kernel. + </para> + </section> + </section> +</chapter> +<!-- +vim: expandtab tw=80 ts=4 +--> |