diff options
Diffstat (limited to 'yocto-poky/documentation/ref-manual/faq.xml')
-rw-r--r-- | yocto-poky/documentation/ref-manual/faq.xml | 836 |
1 files changed, 0 insertions, 836 deletions
diff --git a/yocto-poky/documentation/ref-manual/faq.xml b/yocto-poky/documentation/ref-manual/faq.xml deleted file mode 100644 index d2e4e8eb1..000000000 --- a/yocto-poky/documentation/ref-manual/faq.xml +++ /dev/null @@ -1,836 +0,0 @@ -<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" -[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] > - -<chapter id='faq'> -<title>FAQ</title> -<qandaset> - <qandaentry> - <question> - <para> - How does Poky differ from <ulink url='&OE_HOME_URL;'>OpenEmbedded</ulink>? - </para> - </question> - <answer> - <para> - The term "<ulink url='&YOCTO_DOCS_DEV_URL;#poky'>Poky</ulink>" - refers to the specific reference build system that - the Yocto Project provides. - Poky is based on <ulink url='&YOCTO_DOCS_DEV_URL;#oe-core'>OE-Core</ulink> - and <ulink url='&YOCTO_DOCS_DEV_URL;#bitbake-term'>BitBake</ulink>. - Thus, the generic term used here for the build system is - the "OpenEmbedded build system." - Development in the Yocto Project using Poky is closely tied to OpenEmbedded, with - changes always being merged to OE-Core or BitBake first before being pulled back - into Poky. - This practice benefits both projects immediately. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para id='faq-not-meeting-requirements'> - My development system does not meet the - required Git, tar, and Python versions. - In particular, I do not have Python 2.7.3 or greater, or - I do have Python 3.x, which is specifically not supported by - the Yocto Project. - Can I still use the Yocto Project? - </para> - </question> - <answer> - <para> - You can get the required tools on your host development - system a couple different ways (i.e. building a tarball or - downloading a tarball). - See the - "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>" - section for steps on how to update your build tools. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How can you claim Poky / OpenEmbedded-Core is stable? - </para> - </question> - <answer> - <para> - There are three areas that help with stability; - <itemizedlist> - <listitem><para>The Yocto Project team keeps - <ulink url='&YOCTO_DOCS_DEV_URL;#oe-core'>OE-Core</ulink> small - and focused, containing around 830 recipes as opposed to the thousands - available in other OpenEmbedded community layers. - Keeping it small makes it easy to test and maintain.</para></listitem> - <listitem><para>The Yocto Project team runs manual and automated tests - using a small, fixed set of reference hardware as well as emulated - targets.</para></listitem> - <listitem><para>The Yocto Project uses an autobuilder, - which provides continuous build and integration tests.</para></listitem> - </itemizedlist> - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How do I get support for my board added to the Yocto Project? - </para> - </question> - <answer> - <para> - Support for an additional board is added by creating a - Board Support Package (BSP) layer for it. - For more information on how to create a BSP layer, see the - "<ulink url='&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers'>Understanding and Creating Layers</ulink>" - section in the Yocto Project Development Manual and the - <ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>. - </para> - <para> - Usually, if the board is not completely exotic, adding support in - the Yocto Project is fairly straightforward. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - Are there any products built using the OpenEmbedded build system? - </para> - </question> - <answer> - <para> - The software running on the <ulink url='http://vernier.com/labquest/'>Vernier LabQuest</ulink> - is built using the OpenEmbedded build system. - See the <ulink url='http://www.vernier.com/products/interfaces/labq/'>Vernier LabQuest</ulink> - website for more information. - There are a number of pre-production devices using the OpenEmbedded build system - and the Yocto Project team - announces them as soon as they are released. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - What does the OpenEmbedded build system produce as output? - </para> - </question> - <answer> - <para> - Because you can use the same set of recipes to create output of - various formats, the output of an OpenEmbedded build depends on - how you start it. - Usually, the output is a flashable image ready for the target - device. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How do I add my package to the Yocto Project? - </para> - </question> - <answer> - <para> - To add a package, you need to create a BitBake recipe. - For information on how to create a BitBake recipe, see the - "<ulink url='&YOCTO_DOCS_DEV_URL;#new-recipe-writing-a-new-recipe'>Writing a New Recipe</ulink>" - in the Yocto Project Development Manual. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - Do I have to reflash my entire board with a new Yocto Project image when recompiling - a package? - </para> - </question> - <answer> - <para> - The OpenEmbedded build system can build packages in various - formats such as IPK for OPKG, Debian package - (<filename>.deb</filename>), or RPM. - You can then upgrade the packages using the package tools on - the device, much like on a desktop distribution such as - Ubuntu or Fedora. - However, package management on the target is entirely optional. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - I see the error '<filename>chmod: XXXXX new permissions are r-xrwxrwx, not r-xr-xr-x</filename>'. - What is wrong? - </para> - </question> - <answer> - <para> - You are probably running the build on an NTFS filesystem. - Use <filename>ext2</filename>, <filename>ext3</filename>, or <filename>ext4</filename> instead. - </para> - </answer> - </qandaentry> - -<!-- <qandaentry> - <question> - <para> - How do I make the Yocto Project work in RHEL/CentOS? - </para> - </question> - <answer> - <para> - To get the Yocto Project working under RHEL/CentOS 5.1 you need to first - install some required packages. - The standard CentOS packages needed are: - <itemizedlist> - <listitem><para>"Development tools" (selected during installation)</para></listitem> - <listitem><para><filename>texi2html</filename></para></listitem> - <listitem><para><filename>compat-gcc-34</filename></para></listitem> - </itemizedlist> - On top of these, you need the following external packages: - <itemizedlist> - <listitem><para><filename>python-sqlite2</filename> from - <ulink url='http://dag.wieers.com/rpm/packages/python-sqlite2/'>DAG repository</ulink> - </para></listitem> - <listitem><para><filename>help2man</filename> from - <ulink url='http://centos.karan.org/el4/extras/stable/x86_64/RPMS/repodata/repoview/help2man-0-1.33.1-2.html'>Karan repository</ulink></para></listitem> - </itemizedlist> - </para> - - <para> - Once these packages are installed, the OpenEmbedded build system will be able - to build standard images. - However, there might be a problem with the QEMU emulator segfaulting. - You can either disable the generation of binary locales by setting - <filename><link linkend='var-ENABLE_BINARY_LOCALE_GENERATION'>ENABLE_BINARY_LOCALE_GENERATION</link> - </filename> to "0" or by removing the <filename>linux-2.6-execshield.patch</filename> - from the kernel and rebuilding it since that is the patch that causes the problems with QEMU. - </para> - - <note> - <para>For information on distributions that the Yocto Project - uses during validation, see the - <ulink url='&YOCTO_WIKI_URL;/wiki/Distribution_Support'>Distribution Support</ulink> - Wiki page.</para> - <para>For notes about using the Yocto Project on a RHEL 4-based - host, see the - <ulink url='&YOCTO_WIKI_URL;/wiki/BuildingOnRHEL4'>Building on RHEL4</ulink> - Wiki page.</para> - </note> - </answer> - </qandaentry> --> - - <qandaentry> - <question> - <para> - I see lots of 404 responses for files on - <filename>&YOCTO_HOME_URL;/sources/*</filename>. Is something wrong? - </para> - </question> - <answer> - <para> - Nothing is wrong. - The OpenEmbedded build system checks any configured source mirrors before downloading - from the upstream sources. - The build system does this searching for both source archives and - pre-checked out versions of SCM-managed software. - These checks help in large installations because it can reduce load on the SCM servers - themselves. - The address above is one of the default mirrors configured into the - build system. - Consequently, if an upstream source disappears, the team - can place sources there so builds continue to work. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - I have machine-specific data in a package for one machine only but the package is - being marked as machine-specific in all cases, how do I prevent this? - </para> - </question> - <answer> - <para> - Set <filename><link linkend='var-SRC_URI_OVERRIDES_PACKAGE_ARCH'>SRC_URI_OVERRIDES_PACKAGE_ARCH</link> - </filename> = "0" in the <filename>.bb</filename> file but make sure the package is - manually marked as - machine-specific for the case that needs it. - The code that handles - <filename>SRC_URI_OVERRIDES_PACKAGE_ARCH</filename> is in - the <filename>meta/classes/base.bbclass</filename> file. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para id='i-am-behind-a-firewall-and-need-to-use-a-proxy-server'> - I'm behind a firewall and need to use a proxy server. How do I do that? - </para> - </question> - <answer> - <para> - Most source fetching by the OpenEmbedded build system is done - by <filename>wget</filename> and you therefore need to specify - the proxy settings in a <filename>.wgetrc</filename> file, - which can be in your home directory if you are a single user - or can be in <filename>/usr/local/etc/wgetrc</filename> as - a global user file. - </para> - - <para> - Following is the applicable code for setting various proxy - types in the <filename>.wgetrc</filename> file. - By default, these settings are disabled with comments. - To use them, remove the comments: - <literallayout class='monospaced'> - # You can set the default proxies for Wget to use for http, https, and ftp. - # They will override the value in the environment. - #https_proxy = http://proxy.yoyodyne.com:18023/ - #http_proxy = http://proxy.yoyodyne.com:18023/ - #ftp_proxy = http://proxy.yoyodyne.com:18023/ - - # If you do not want to use proxy at all, set this to off. - #use_proxy = on - </literallayout> - The Yocto Project also includes a - <filename>meta-poky/conf/site.conf.sample</filename> file that - shows how to configure CVS and Git proxy servers if needed. - For more information on setting up various proxy types and - configuring proxy servers, see the - "<ulink url='&YOCTO_WIKI_URL;/wiki/Working_Behind_a_Network_Proxy'>Working Behind a Network Proxy</ulink>" - Wiki page. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - What’s the difference between <replaceable>target</replaceable> and <replaceable>target</replaceable><filename>-native</filename>? - </para> - </question> - <answer> - <para> - The <filename>*-native</filename> targets are designed to run on the system - being used for the build. - These are usually tools that are needed to assist the build in some way such as - <filename>quilt-native</filename>, which is used to apply patches. - The non-native version is the one that runs on the target device. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - I'm seeing random build failures. Help?! - </para> - </question> - <answer> - <para> - If the same build is failing in totally different and random - ways, the most likely explanation is: - <itemizedlist> - <listitem><para>The hardware you are running the build on - has some problem.</para></listitem> - <listitem><para>You are running the build under - virtualization, in which case the virtualization - probably has bugs.</para></listitem> - </itemizedlist> - The OpenEmbedded build system processes a massive amount of - data that causes lots of network, disk and CPU activity and - is sensitive to even single-bit failures in any of these areas. - True random failures have always been traced back to hardware - or virtualization issues. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - When I try to build a native recipe, the build fails with <filename>iconv.h</filename> problems. - </para> - </question> - <answer> - <para> - If you get an error message that indicates GNU - <filename>libiconv</filename> is not in use but - <filename>iconv.h</filename> has been included from - <filename>libiconv</filename>, you need to check to see if - you have a previously installed version of the header file - in <filename>/usr/local/include</filename>. - <literallayout class='monospaced'> - #error GNU libiconv not in use but included iconv.h is from libiconv - </literallayout> - If you find a previously installed file, you should either - uninstall it or temporarily rename it and try the build again. - </para> - - <para> - This issue is just a single manifestation of "system - leakage" issues caused when the OpenEmbedded build system - finds and uses previously installed files during a native - build. - This type of issue might not be limited to - <filename>iconv.h</filename>. - Be sure that leakage cannot occur from - <filename>/usr/local/include</filename> and - <filename>/opt</filename> locations. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - What do we need to ship for license compliance? - </para> - </question> - <answer> - <para> - This is a difficult question and you need to consult your lawyer - for the answer for your specific case. - It is worth bearing in mind that for GPL compliance, there needs - to be enough information shipped to allow someone else to - rebuild and produce the same end result you are shipping. - This means sharing the source code, any patches applied to it, - and also any configuration information about how that package - was configured and built. - </para> - - <para> - You can find more information on licensing in the - "<ulink url='&YOCTO_DOCS_DEV_URL;#licensing'>Licensing</ulink>" - and "<ulink url='&YOCTO_DOCS_DEV_URL;#maintaining-open-source-license-compliance-during-your-products-lifecycle'>Maintaining Open Source License Compliance During Your Product's Lifecycle</ulink>" - sections, both of which are in the Yocto Project Development - Manual. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How do I disable the cursor on my touchscreen device? - </para> - </question> - <answer> - <para> - You need to create a form factor file as described in the - "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-filelayout-misc-recipes'>Miscellaneous BSP-Specific Recipe Files</ulink>" - section in the Yocto Project Board Support Packages (BSP) - Developer's Guide. - Set the <filename>HAVE_TOUCHSCREEN</filename> variable equal to - one as follows: - <literallayout class='monospaced'> - HAVE_TOUCHSCREEN=1 - </literallayout> - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How do I make sure connected network interfaces are brought up by default? - </para> - </question> - <answer> - <para> - The default interfaces file provided by the netbase recipe does not - automatically bring up network interfaces. - Therefore, you will need to add a BSP-specific netbase that includes an interfaces - file. - See the "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-filelayout-misc-recipes'>Miscellaneous BSP-Specific Recipe Files</ulink>" - section in the Yocto Project Board Support Packages (BSP) - Developer's Guide for information on creating these types of - miscellaneous recipe files. - </para> - <para> - For example, add the following files to your layer: - <literallayout class='monospaced'> - meta-MACHINE/recipes-bsp/netbase/netbase/MACHINE/interfaces - meta-MACHINE/recipes-bsp/netbase/netbase_5.0.bbappend - </literallayout> - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How do I create images with more free space? - </para> - </question> - <answer> - <para> - By default, the OpenEmbedded build system creates images - that are 1.3 times the size of the populated root filesystem. - To affect the image size, you need to set various - configurations: - <itemizedlist> - <listitem><para><emphasis>Image Size:</emphasis> - The OpenEmbedded build system uses the - <link linkend='var-IMAGE_ROOTFS_SIZE'><filename>IMAGE_ROOTFS_SIZE</filename></link> - variable to define the size of the image in Kbytes. - The build system determines the size by taking into - account the initial root filesystem size before any - modifications such as requested size for the image and - any requested additional free disk space to be - added to the image.</para></listitem> - <listitem><para><emphasis>Overhead:</emphasis> - Use the - <link linkend='var-IMAGE_OVERHEAD_FACTOR'><filename>IMAGE_OVERHEAD_FACTOR</filename></link> - variable to define the multiplier that the build system - applies to the initial image size, which is 1.3 by - default.</para></listitem> - <listitem><para><emphasis>Additional Free Space:</emphasis> - Use the - <link linkend='var-IMAGE_ROOTFS_EXTRA_SPACE'><filename>IMAGE_ROOTFS_EXTRA_SPACE</filename></link> - variable to add additional free space to the image. - The build system adds this space to the image after - it determines its - <filename>IMAGE_ROOTFS_SIZE</filename>. - </para></listitem> - </itemizedlist> - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - Why don't you support directories with spaces in the pathnames? - </para> - </question> - <answer> - <para> - The Yocto Project team has tried to do this before but too - many of the tools the OpenEmbedded build system depends on, - such as <filename>autoconf</filename>, break when they find - spaces in pathnames. - Until that situation changes, the team will not support spaces - in pathnames. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - How do I use an external toolchain? - </para> - </question> - <answer> - <para> - The toolchain configuration is very flexible and customizable. - It is primarily controlled with the - <filename><link linkend='var-TCMODE'>TCMODE</link></filename> - variable. - This variable controls which <filename>tcmode-*.inc</filename> - file to include from the - <filename>meta/conf/distro/include</filename> directory within - the - <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>. - </para> - - <para> - The default value of <filename>TCMODE</filename> is "default", - which tells the OpenEmbedded build system to use its internally - built toolchain (i.e. <filename>tcmode-default.inc</filename>). - However, other patterns are accepted. - In particular, "external-*" refers to external toolchains. - One example is the Sourcery G++ Toolchain. - The support for this toolchain resides in the separate - <filename>meta-sourcery</filename> layer at - <ulink url='http://github.com/MentorEmbedded/meta-sourcery/'></ulink>. - </para> - - <para> - In addition to the toolchain configuration, you also need a - corresponding toolchain recipe file. - This recipe file needs to package up any pre-built objects in - the toolchain such as <filename>libgcc</filename>, - <filename>libstdcc++</filename>, any locales, and - <filename>libc</filename>. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para id='how-does-the-yocto-project-obtain-source-code-and-will-it-work-behind-my-firewall-or-proxy-server'> - How does the OpenEmbedded build system obtain source code and - will it work behind my firewall or proxy server? - </para> - </question> - <answer> - <para> - The way the build system obtains source code is highly - configurable. - You can setup the build system to get source code in most - environments if HTTP transport is available. - </para> - <para> - When the build system searches for source code, it first - tries the local download directory. - If that location fails, Poky tries - <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>, - the upstream source, and then - <link linkend='var-MIRRORS'><filename>MIRRORS</filename></link> - in that order. - </para> - <para> - Assuming your distribution is "poky", the OpenEmbedded build - system uses the Yocto Project source - <filename>PREMIRRORS</filename> by default for SCM-based - sources, upstreams for normal tarballs, and then falls back - to a number of other mirrors including the Yocto Project - source mirror if those fail. - </para> - <para> - As an example, you could add a specific server for the - build system to attempt before any others by adding something - like the following to the <filename>local.conf</filename> - configuration file: - <literallayout class='monospaced'> - PREMIRRORS_prepend = "\ - git://.*/.* http://www.yoctoproject.org/sources/ \n \ - ftp://.*/.* http://www.yoctoproject.org/sources/ \n \ - http://.*/.* http://www.yoctoproject.org/sources/ \n \ - https://.*/.* http://www.yoctoproject.org/sources/ \n" - </literallayout> - </para> - <para> - These changes cause the build system to intercept Git, FTP, - HTTP, and HTTPS requests and direct them to the - <filename>http://</filename> sources mirror. - You can use <filename>file://</filename> URLs to point to - local directories or network shares as well. - </para> - <para> - Aside from the previous technique, these options also exist: - <literallayout class='monospaced'> - BB_NO_NETWORK = "1" - </literallayout> - This statement tells BitBake to issue an error instead of - trying to access the Internet. - This technique is useful if you want to ensure code builds - only from local sources. - </para> - <para> - Here is another technique: - <literallayout class='monospaced'> - BB_FETCH_PREMIRRORONLY = "1" - </literallayout> - This statement limits the build system to pulling source - from the <filename>PREMIRRORS</filename> only. - Again, this technique is useful for reproducing builds. - </para> - <para> - Here is another technique: - <literallayout class='monospaced'> - BB_GENERATE_MIRROR_TARBALLS = "1" - </literallayout> - This statement tells the build system to generate mirror - tarballs. - This technique is useful if you want to create a mirror server. - If not, however, the technique can simply waste time during - the build. - </para> - <para> - Finally, consider an example where you are behind an - HTTP-only firewall. - You could make the following changes to the - <filename>local.conf</filename> configuration file as long as - the <filename>PREMIRRORS</filename> server is current: - <literallayout class='monospaced'> - PREMIRRORS_prepend = "\ - ftp://.*/.* http://www.yoctoproject.org/sources/ \n \ - http://.*/.* http://www.yoctoproject.org/sources/ \n \ - https://.*/.* http://www.yoctoproject.org/sources/ \n" - BB_FETCH_PREMIRRORONLY = "1" - </literallayout> - These changes would cause the build system to successfully - fetch source over HTTP and any network accesses to anything - other than the <filename>PREMIRRORS</filename> would fail. - </para> - <para> - The build system also honors the standard shell environment - variables <filename>http_proxy</filename>, - <filename>ftp_proxy</filename>, - <filename>https_proxy</filename>, and - <filename>all_proxy</filename> to redirect requests through - proxy servers. - </para> - <note> - You can find more information on the - "<ulink url='&YOCTO_WIKI_URL;/wiki/Working_Behind_a_Network_Proxy'>Working Behind a Network Proxy</ulink>" - Wiki page. - </note> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - Can I get rid of build output so I can start over? - </para> - </question> - <answer> - <para> - Yes - you can easily do this. - When you use BitBake to build an image, all the build output - goes into the directory created when you run the - build environment setup script (i.e. - <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link> - or - <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>). - By default, this <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink> - is named <filename>build</filename> but can be named - anything you want. - </para> - - <para> - Within the Build Directory, is the <filename>tmp</filename> - directory. - To remove all the build output yet preserve any source code or - downloaded files from previous builds, simply remove the - <filename>tmp</filename> directory. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - Why do <filename>${bindir}</filename> and <filename>${libdir}</filename> have strange values for <filename>-native</filename> recipes? - </para> - </question> - <answer> - <para> - Executables and libraries might need to be used from a - directory other than the directory into which they were - initially installed. - Complicating this situation is the fact that sometimes these - executables and libraries are compiled with the expectation - of being run from that initial installation target directory. - If this is the case, moving them causes problems. - </para> - - <para> - This scenario is a fundamental problem for package maintainers - of mainstream Linux distributions as well as for the - OpenEmbedded build system. - As such, a well-established solution exists. - Makefiles, Autotools configuration scripts, and other build - systems are expected to respect environment variables such as - <filename>bindir</filename>, <filename>libdir</filename>, - and <filename>sysconfdir</filename> that indicate where - executables, libraries, and data reside when a program is - actually run. - They are also expected to respect a - <filename>DESTDIR</filename> environment variable, which is - prepended to all the other variables when the build system - actually installs the files. - It is understood that the program does not actually run from - within <filename>DESTDIR</filename>. - </para> - - <para> - When the OpenEmbedded build system uses a recipe to build a - target-architecture program (i.e. one that is intended for - inclusion on the image being built), that program eventually - runs from the root file system of that image. - Thus, the build system provides a value of "/usr/bin" for - <filename>bindir</filename>, a value of "/usr/lib" for - <filename>libdir</filename>, and so forth. - </para> - - <para> - Meanwhile, <filename>DESTDIR</filename> is a path within the - <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>. - However, when the recipe builds a native program (i.e. one - that is intended to run on the build machine), that program - is never installed directly to the build machine's root - file system. - Consequently, the build system uses paths within the Build - Directory for <filename>DESTDIR</filename>, - <filename>bindir</filename> and related variables. - To better understand this, consider the following two paths - where the first is relatively normal and the second is not: - <note> - Due to these lengthy examples, the paths are artificially - broken across lines for readability. - </note> - <literallayout class='monospaced'> - /home/maxtothemax/poky-bootchart2/build/tmp/work/i586-poky-linux/zlib/ - 1.2.8-r0/sysroot-destdir/usr/bin - - /home/maxtothemax/poky-bootchart2/build/tmp/work/x86_64-linux/ - zlib-native/1.2.8-r0/sysroot-destdir/home/maxtothemax/poky-bootchart2/ - build/tmp/sysroots/x86_64-linux/usr/bin - </literallayout> - Even if the paths look unusual, they both are correct - - the first for a target and the second for a native recipe. - These paths are a consequence of the - <filename>DESTDIR</filename> mechanism and while they - appear strange, they are correct and in practice very effective. - </para> - </answer> - </qandaentry> - - <qandaentry> - <question> - <para> - The files provided by my <filename>*-native</filename> recipe do - not appear to be available to other recipes. - Files are missing from the native sysroot, my recipe is - installing to the wrong place, or I am getting permissions - errors during the do_install task in my recipe! What is wrong? - </para> - </question> - <answer> - <para> - This situation results when a build system does - not recognize the environment variables supplied to it by - <ulink url='&YOCTO_DOCS_DEV_URL;#bitbake-term'>BitBake</ulink>. - The incident that prompted this FAQ entry involved a Makefile - that used an environment variable named - <filename>BINDIR</filename> instead of the more standard - variable <filename>bindir</filename>. - The makefile's hardcoded default value of "/usr/bin" worked - most of the time, but not for the recipe's - <filename>-native</filename> variant. - For another example, permissions errors might be caused - by a Makefile that ignores <filename>DESTDIR</filename> or uses - a different name for that environment variable. - Check the the build system to see if these kinds of - issues exist. - </para> - </answer> - </qandaentry> - -</qandaset> -</chapter> -<!-- -vim: expandtab tw=80 ts=4 ---> |