diff options
Diffstat (limited to 'yocto-poky/documentation/ref-manual/introduction.xml')
-rw-r--r-- | yocto-poky/documentation/ref-manual/introduction.xml | 591 |
1 files changed, 591 insertions, 0 deletions
diff --git a/yocto-poky/documentation/ref-manual/introduction.xml b/yocto-poky/documentation/ref-manual/introduction.xml new file mode 100644 index 000000000..5250e26be --- /dev/null +++ b/yocto-poky/documentation/ref-manual/introduction.xml @@ -0,0 +1,591 @@ +<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" +[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] > + +<chapter id='ref-manual-intro'> +<title>Introduction</title> + +<section id='intro-welcome'> + <title>Introduction</title> + + <para> + This manual provides reference information for the current release of the Yocto Project. + The Yocto Project is an open-source collaboration project focused on embedded Linux + developers. + Amongst other things, the Yocto Project uses the OpenEmbedded build system, which + is based on the Poky project, to construct complete Linux images. + You can find complete introductory and getting started information on the Yocto Project + by reading the + <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink>. + For task-based information using the Yocto Project, see the + <ulink url='&YOCTO_DOCS_DEV_URL;'>Yocto Project Development Manual</ulink> + and the <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>. + For Board Support Package (BSP) structure information, see the + <ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>. + You can find information on tracing and profiling in the + <ulink url='&YOCTO_DOCS_PROF_URL;'>Yocto Project Profiling and Tracing Manual</ulink>. + For information on BitBake, which is the task execution tool the + OpenEmbedded build system is based on, see the + <ulink url='&YOCTO_DOCS_BB_URL;#bitbake-user-manual'>BitBake User Manual</ulink>. + Finally, you can also find lots of Yocto Project information on the + <ulink url="&YOCTO_HOME_URL;">Yocto Project website</ulink>. + </para> +</section> + +<section id='intro-manualoverview'> + <title>Documentation Overview</title> + <para> + This reference manual consists of the following: + <itemizedlist> + <listitem><para><emphasis> + <link linkend='usingpoky'>Using the Yocto Project</link>:</emphasis> + Provides an overview of the components that make up the Yocto Project + followed by information about debugging images created in the Yocto Project. + </para></listitem> + <listitem><para><emphasis> + <link linkend='closer-look'>A Closer Look at the Yocto Project Development Environment</link>:</emphasis> + Provides a more detailed look at the Yocto Project development + environment within the context of development. + </para></listitem> + <listitem><para><emphasis> + <link linkend='technical-details'>Technical Details</link>:</emphasis> + Describes fundamental Yocto Project components as well as an explanation + behind how the Yocto Project uses shared state (sstate) cache to speed build time. + </para></listitem> + <listitem><para><emphasis> + <link linkend='migration'>Migrating to a Newer Yocto Project Release</link>:</emphasis> + Describes release-specific information that helps you move from + one Yocto Project Release to another. + </para></listitem> + <listitem><para><emphasis> + <link linkend='ref-structure'>Directory Structure</link>:</emphasis> + Describes the + <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink> created + either by unpacking a released Yocto Project tarball on your host development system, + or by cloning the upstream + <ulink url='&YOCTO_DOCS_DEV_URL;#poky'>Poky</ulink> Git repository. + </para></listitem> + <listitem><para><emphasis> + <link linkend='ref-classes'>Classes</link>:</emphasis> + Describes the classes used in the Yocto Project.</para></listitem> + <listitem><para><emphasis> + <link linkend='ref-tasks'>Tasks</link>:</emphasis> + Describes the tasks defined by the OpenEmbedded build system. + </para></listitem> + <listitem><para><emphasis> + <link linkend='ref-qa-checks'>QA Error and Warning Messages</link>:</emphasis> + Lists and describes QA warning and error messages. + </para></listitem> + <listitem><para><emphasis> + <link linkend='ref-images'>Images</link>:</emphasis> + Describes the standard images that the Yocto Project supports. + </para></listitem> + <listitem><para><emphasis> + <link linkend='ref-features'>Features</link>:</emphasis> + Describes mechanisms for creating distribution, machine, and image + features during the build process using the OpenEmbedded build system.</para></listitem> + <listitem><para><emphasis> + <link linkend='ref-variables-glos'>Variables Glossary</link>:</emphasis> + Presents most variables used by the OpenEmbedded build system, which + uses BitBake. + Entries describe the function of the variable and how to apply them. + </para></listitem> + <listitem><para><emphasis> + <link linkend='ref-varlocality'>Variable Context</link>:</emphasis> + Provides variable locality or context.</para></listitem> + <listitem><para><emphasis> + <link linkend='faq'>FAQ</link>:</emphasis> + Provides answers for commonly asked questions in the Yocto Project + development environment.</para></listitem> + <listitem><para><emphasis> + <link linkend='resources'>Contributing to the Yocto Project</link>:</emphasis> + Provides guidance on how you can contribute back to the Yocto + Project.</para></listitem> + </itemizedlist> + </para> +</section> + + +<section id='intro-requirements'> +<title>System Requirements</title> + <para> + For general Yocto Project system requirements, see the + "<ulink url='&YOCTO_DOCS_QS_URL;#yp-resources'>Setting Up to Use the Yocto Project</ulink>" section + in the Yocto Project Quick Start. + The remainder of this section provides details on system requirements + not covered in the Yocto Project Quick Start. + </para> + + <section id='detailed-supported-distros'> + <title>Supported Linux Distributions</title> + + <para> + Currently, the Yocto Project is supported on the following + distributions: + <note> + <para> + Yocto Project releases are tested against the stable Linux + distributions in the following list. + The Yocto Project should work on other distributions but + validation is not performed against them. + </para> + + <para> + In particular, the Yocto Project does not support + and currently has no plans to support + rolling-releases or development distributions due to their + constantly changing nature. + We welcome patches and bug reports, but keep in mind that + our priority is on the supported platforms listed below. + </para> + + <para> + If you encounter problems, please go to + <ulink url='&YOCTO_BUGZILLA_URL;'>Yocto Project Bugzilla</ulink> + and submit a bug. + We are interested in hearing about your experience. + </para> + </note> + <itemizedlist> +<!-- + <listitem><para>Ubuntu 10.04</para></listitem> + <listitem><para>Ubuntu 11.10</para></listitem> + <listitem><para>Ubuntu 12.04 (LTS)</para></listitem> + <listitem><para>Ubuntu 13.10</para></listitem> --> + <listitem><para>Ubuntu 14.04 (LTS)</para></listitem> + <listitem><para>Ubuntu 14.10</para></listitem> +<!-- <listitem><para>Fedora 16 (Verne)</para></listitem> + <listitem><para>Fedora 17 (Spherical)</para></listitem> + <listitem><para>Fedora release 19 (Schrödinger's Cat)</para></listitem> + <listitem><para>Fedora release 20 (Heisenbug)</para></listitem> --> + <listitem><para>Fedora release 21</para></listitem> +<!-- <listitem><para>CentOS release 5.6 (Final)</para></listitem> + <listitem><para>CentOS release 5.7 (Final)</para></listitem> + <listitem><para>CentOS release 5.8 (Final)</para></listitem> + <listitem><para>CentOS release 6.3 (Final)</para></listitem> --> + <listitem><para>CentOS release 6.x</para></listitem> + <listitem><para>CentOS release 7.x</para></listitem> +<!-- <listitem><para>Debian GNU/Linux 6.0 (Squeeze)</para></listitem> --> + <listitem><para>Debian GNU/Linux 7.x (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 8.x (Jessie)</para></listitem> +<!-- <listitem><para>Debian GNU/Linux 7.1 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.2 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.3 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.4 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.5 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.6 (Wheezy)</para></listitem> --> +<!-- <listitem><para>openSUSE 11.4</para></listitem> + <listitem><para>openSUSE 12.1</para></listitem> + <listitem><para>openSUSE 12.2</para></listitem> + <listitem><para>openSUSE 12.3</para></listitem> + <listitem><para>openSUSE 13.1</para></listitem> --> + <listitem><para>openSUSE 13.2</para></listitem> + </itemizedlist> + </para> + + <note> + While the Yocto Project Team attempts to ensure all Yocto Project + releases are one hundred percent compatible with each officially + supported Linux distribution, instances might exist where you + encounter a problem while using the Yocto Project on a specific + distribution. + For example, the CentOS 6.4 distribution does not include the + Gtk+ 2.20.0 and PyGtk 2.21.0 (or higher) packages, which are + required to run + <ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'>Hob</ulink>. + </note> + </section> + + <section id='required-packages-for-the-host-development-system'> + <title>Required Packages for the Host Development System</title> + + <para> + The list of packages you need on the host development system can + be large when covering all build scenarios using the Yocto Project. + This section provides required packages according to + Linux distribution and function. + </para> + + <section id='ubuntu-packages'> + <title>Ubuntu and Debian</title> + + <para> + The following list shows the required packages by function + given a supported Ubuntu or Debian Linux distribution: + <note> + If your build system has the + <filename>oss4-dev</filename> package installed, you + might experience QEMU build failures due to the package + installing its own custom + <filename>/usr/include/linux/soundcard.h</filename> on + the Debian system. + If you run into this situation, either of the following + solutions exist: + <literallayout class='monospaced'> + $ sudo apt-get build-dep qemu + $ sudo apt-get remove oss4-dev + </literallayout> + </note> + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image on a headless + system: + <literallayout class='monospaced'> + $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo apt-get install libsdl1.2-dev xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo apt-get install make xsltproc docbook-utils fop dblatex xmlto + </literallayout></para></listitem> + <listitem><para><emphasis>ADT Installer Extras:</emphasis> + Packages needed if you are going to be using the + <ulink url='&YOCTO_DOCS_ADT_URL;#using-the-adt-installer'>Application Development Toolkit (ADT) Installer</ulink>: + <literallayout class='monospaced'> + $ sudo apt-get install autoconf automake libtool libglib2.0-dev + </literallayout></para></listitem> + </itemizedlist> + </para> + </section> + + <section id='fedora-packages'> + <title>Fedora Packages</title> + + <para> + The following list shows the required packages by function + given a supported Fedora Linux distribution: + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo yum install &FEDORA_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo yum install SDL-devel xterm perl-Thread-Queue + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo yum install make docbook-style-dsssl docbook-style-xsl \ + docbook-dtds docbook-utils fop libxslt dblatex xmlto xsltproc + </literallayout></para></listitem> + <listitem><para><emphasis>ADT Installer Extras:</emphasis> + Packages needed if you are going to be using the + <ulink url='&YOCTO_DOCS_ADT_URL;#using-the-adt-installer'>Application Development Toolkit (ADT) Installer</ulink>: + <literallayout class='monospaced'> + $ sudo yum install autoconf automake libtool glib2-devel + </literallayout></para></listitem> + </itemizedlist> + </para> + </section> + + <section id='opensuse-packages'> + <title>openSUSE Packages</title> + + <para> + The following list shows the required packages by function + given a supported openSUSE Linux distribution: + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo zypper install libSDL-devel xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo zypper install make fop xsltproc dblatex xmlto + </literallayout></para></listitem> + <listitem><para><emphasis>ADT Installer Extras:</emphasis> + Packages needed if you are going to be using the + <ulink url='&YOCTO_DOCS_ADT_URL;#using-the-adt-installer'>Application Development Toolkit (ADT) Installer</ulink>: + <literallayout class='monospaced'> + $ sudo zypper install autoconf automake libtool glib2-devel + </literallayout></para></listitem> + </itemizedlist> + </para> + </section> + + <section id='centos-packages'> + <title>CentOS Packages</title> + + <para> + The following list shows the required packages by function + given a supported CentOS Linux distribution: + <note> + For CentOS 6.x, some of the versions of the components + provided by the distribution are too old (e.g. Git, Python, + and tar). + It is recommended that you install the buildtools in order + to provide versions that will work with the OpenEmbedded + build system. + For information on how to install the buildtools tarball, + see the + "<link linkend='required-git-tar-and-python-versions'>Required Git, Tar, and Python Versions</link>" + section. + </note> + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo yum install &CENTOS_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo yum install SDL-devel xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo yum install make docbook-style-dsssl docbook-style-xsl \ + docbook-dtds docbook-utils fop libxslt dblatex xmlto xsltproc + </literallayout></para></listitem> + <listitem><para><emphasis>ADT Installer Extras:</emphasis> + Packages needed if you are going to be using the + <ulink url='&YOCTO_DOCS_ADT_URL;#using-the-adt-installer'>Application Development Toolkit (ADT) Installer</ulink>: + <literallayout class='monospaced'> + $ sudo yum install autoconf automake libtool glib2-devel + </literallayout></para></listitem> + </itemizedlist> + </para> + </section> + </section> + + <section id='required-git-tar-and-python-versions'> + <title>Required Git, tar, and Python Versions</title> + + <para> + In order to use the build system, your host development system + must meet the following version requirements for Git, tar, and + Python: + <itemizedlist> + <listitem><para>Git 1.7.8 or greater</para></listitem> + <listitem><para>tar 1.24 or greater</para></listitem> + <listitem><para>Python 2.7.3 or greater not including + Python 3.x, which is not supported.</para></listitem> + </itemizedlist> + </para> + + <para> + If your host development system does not meet all these requirements, + you can resolve this by installing a <filename>buildtools</filename> + tarball that contains these tools. + You can get the tarball one of two ways: download a pre-built + tarball or use BitBake to build the tarball. + </para> + + <section id='downloading-a-pre-built-buildtools-tarball'> + <title>Downloading a Pre-Built <filename>buildtools</filename> Tarball</title> + + <para> + Downloading and running a pre-built buildtools installer is + the easiest of the two methods by which you can get these tools: + <orderedlist> + <listitem><para> + Locate and download the <filename>*.sh</filename> at + <ulink url='&YOCTO_DL_URL;/releases/yocto/yocto-&DISTRO;/buildtools/'></ulink>. + </para></listitem> + <listitem><para> + Execute the installation script. + Here is an example: + <literallayout class='monospaced'> + $ sh poky-glibc-x86_64-buildtools-tarball-x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh + </literallayout> + During execution, a prompt appears that allows you to + choose the installation directory. + For example, you could choose the following: + <literallayout class='monospaced'> + /home/<replaceable>your-username</replaceable>/buildtools + </literallayout> + </para></listitem> + <listitem><para> + Source the tools environment setup script by using a + command like the following: + <literallayout class='monospaced'> + $ source /home/<replaceable>your_username</replaceable>/buildtools/environment-setup-i586-poky-linux + </literallayout> + Of course, you need to supply your installation directory and be + sure to use the right file (i.e. i585 or x86-64). + </para> + <para> + After you have sourced the setup script, + the tools are added to <filename>PATH</filename> + and any other environment variables required to run the + tools are initialized. + The results are working versions versions of Git, tar, + Python and <filename>chrpath</filename>. + </para></listitem> + </orderedlist> + </para> + </section> + + <section id='building-your-own-buildtools-tarball'> + <title>Building Your Own <filename>buildtools</filename> Tarball</title> + + <para> + Building and running your own buildtools installer applies + only when you have a build host that can already run BitBake. + In this case, you use that machine to build the + <filename>.sh</filename> file and then + take steps to transfer and run it on a + machine that does not meet the minimal Git, tar, and Python + requirements. + </para> + + <para> + Here are the steps to take to build and run your own + buildtools installer: + <orderedlist> + <listitem><para> + On the machine that is able to run BitBake, + be sure you have set up your build environment with + the setup script + (<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link> + or + <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>). + </para></listitem> + <listitem><para> + Run the BitBake command to build the tarball: + <literallayout class='monospaced'> + $ bitbake buildtools-tarball + </literallayout> + <note> + The + <link linkend='var-SDKMACHINE'><filename>SDKMACHINE</filename></link> + variable in your <filename>local.conf</filename> file + determines whether you build tools for a 32-bit + or 64-bit system. + </note> + Once the build completes, you can find the + <filename>.sh</filename> file that installs + the tools in the <filename>tmp/deploy/sdk</filename> + subdirectory of the + <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>. + The installer file has the string "buildtools" + in the name. + </para></listitem> + <listitem><para> + Transfer the <filename>.sh</filename> file from the + build host to the machine that does not meet the + Git, tar, or Python requirements. + </para></listitem> + <listitem><para> + On the machine that does not meet the requirements, + run the <filename>.sh</filename> file + to install the tools. + Here is an example: + <literallayout class='monospaced'> + $ sh poky-glibc-x86_64-buildtools-tarball-x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh + </literallayout> + During execution, a prompt appears that allows you to + choose the installation directory. + For example, you could choose the following: + <literallayout class='monospaced'> + /home/<replaceable>your_username</replaceable>/buildtools + </literallayout> + </para></listitem> + <listitem><para> + Source the tools environment setup script by using a + command like the following: + <literallayout class='monospaced'> + $ source /home/<replaceable>your_username</replaceable>/buildtools/environment-setup-i586-poky-linux + </literallayout> + Of course, you need to supply your installation directory and be + sure to use the right file (i.e. i585 or x86-64). + </para> + <para> + After you have sourced the setup script, + the tools are added to <filename>PATH</filename> + and any other environment variables required to run the + tools are initialized. + The results are working versions versions of Git, tar, + Python and <filename>chrpath</filename>. + </para></listitem> + </orderedlist> + </para> + </section> + </section> +</section> + +<section id='intro-getit'> + <title>Obtaining the Yocto Project</title> + <para> + The Yocto Project development team makes the Yocto Project available through a number + of methods: + <itemizedlist> + <listitem><para><emphasis>Source Repositories:</emphasis> + Working from a copy of the upstream + <filename>poky</filename> repository is the + preferred method for obtaining and using a Yocto Project + release. + You can view the Yocto Project Source Repositories at + <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>. + In particular, you can find the + <filename>poky</filename> repository at + <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi/poky/'></ulink>. + </para></listitem> + <listitem><para><emphasis>Releases:</emphasis> Stable, tested + releases are available as tarballs through + <ulink url='&YOCTO_DL_URL;/releases/yocto/'/>.</para></listitem> + <listitem><para><emphasis>Nightly Builds:</emphasis> These + tarball releases are available at + <ulink url='&YOCTO_AB_NIGHTLY_URL;'/>. + These builds include Yocto Project releases, meta-toolchain + tarball installation scripts, and experimental builds. + </para></listitem> + <listitem><para><emphasis>Yocto Project Website:</emphasis> You can + find tarball releases of the Yocto Project and supported BSPs + at the + <ulink url='&YOCTO_HOME_URL;'>Yocto Project website</ulink>. + Along with these downloads, you can find lots of other + information at this site. + </para></listitem> + </itemizedlist> + </para> +</section> + +<section id='intro-getit-dev'> + <title>Development Checkouts</title> + <para> + Development using the Yocto Project requires a local + <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>. + You can set up the Source Directory by cloning a copy of the upstream + <ulink url='&YOCTO_DOCS_DEV_URL;#poky'>poky</ulink> Git repository. + For information on how to do this, see the + "<ulink url='&YOCTO_DOCS_DEV_URL;#getting-setup'>Getting Set Up</ulink>" + section in the Yocto Project Development Manual. + </para> +</section> + +</chapter> +<!-- +vim: expandtab tw=80 ts=4 +--> |