1 files changed, 0 insertions, 199 deletions
diff --git a/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh b/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
deleted file mode 100644
index b56210915..000000000
--- a/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
+++ /dev/null
@@ -1,199 +0,0 @@
-#!/bin/sh -e
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# install.sh [device_name] [rootfs_name]
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-# We need 200 Mb for the boot partition
-boot_size=200
-
-# 50% for the second rootfs
-testfs_ratio=50
-
-found="no"
-
-echo "Searching for a hard drive..."
-for device in 'hda' 'hdb' 'sda' 'sdb' 'mmcblk0' 'mmcblk1'
-do
-    if [ -e /sys/block/${device}/removable ]; then
-        if [ "$(cat /sys/block/${device}/removable)" = "0" ]; then
-            found="yes"
-
-            while true; do
-                # Try sleeping here to avoid getting kernel messages
-                # obscuring/confusing user
-                sleep 5
-                echo "Found drive at /dev/${device}. Do you want to install this image there ? [y/n]"
-                read answer
-                if [ "$answer" = "y" ] ; then
-                    break
-                fi
-
-                if [ "$answer" = "n" ] ; then
-                    found=no
-                    break
-                fi
-
-                echo "Please answer y or n"
-            done
-        fi
-    fi
-
-    if [ "$found" = "yes" ]; then
-        break;
-    fi
-
-done
-
-if [ "$found" = "no" ]; then
-    exit 1
-fi
-
-echo "Installing image on /dev/${device}"
-
-#
-# The udev automounter can cause pain here, kill it
-#
-rm -f /etc/udev/rules.d/automount.rules
-rm -f /etc/udev/scripts/mount*
-
-#
-# Unmount anything the automounter had mounted
-#
-umount /dev/${device}* 2> /dev/null || /bin/true
-
-mkdir -p /tmp
-cat /proc/mounts > /etc/mtab
-
-disk_size=$(parted /dev/${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//")
-
-testfs_size=$((disk_size*testfs_ratio/100))
-rootfs_size=$((disk_size-boot_size-testfs_size))
-
-rootfs_start=$((boot_size))
-rootfs_end=$((rootfs_start+rootfs_size))
-testfs_start=$((rootfs_end))
-
-# MMC devices are special in a couple of ways
-# 1) they use a partition prefix character 'p'
-# 2) they are detected asynchronously (need rootwait)
-rootwait=""
-part_prefix=""
-if [ ! "${device#mmcblk}" = "${device}" ]; then
-    part_prefix="p"
-    rootwait="rootwait"
-fi
-bootfs=/dev/${device}${part_prefix}1
-rootfs=/dev/${device}${part_prefix}2
-testfs=/dev/${device}${part_prefix}3
-
-echo "*****************"
-echo "Boot partition size:   $boot_size MB ($bootfs)"
-echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
-echo "Testfs partition size:   $testfs_size MB ($testfs)"
-echo "*****************"
-echo "Deleting partition table on /dev/${device} ..."
-dd if=/dev/zero of=/dev/${device} bs=512 count=2
-
-echo "Creating new partition table on /dev/${device} ..."
-parted /dev/${device} mklabel gpt
-
-echo "Creating boot partition on $bootfs"
-parted /dev/${device} mkpart primary 0% $boot_size
-parted /dev/${device} set 1 boot on
-
-echo "Creating rootfs partition on $rootfs"
-parted /dev/${device} mkpart primary $rootfs_start $rootfs_end
-
-echo "Creating testfs partition on $testfs"
-parted /dev/${device} mkpart primary $testfs_start 100%
-
-parted /dev/${device} print
-
-echo "Formatting $bootfs to vfat..."
-mkfs.vfat -n "boot" $bootfs
-
-echo "Formatting $rootfs to ext3..."
-mkfs.ext3 -L "platform" $rootfs
-
-echo "Formatting $testfs to ext3..."
-mkfs.ext3 -L "testrootfs" $testfs
-
-mkdir /ssd
-mkdir /rootmnt
-mkdir /bootmnt
-
-mount $rootfs /ssd
-mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /rootmnt
-
-echo "Copying rootfs files..."
-cp -a /rootmnt/* /ssd
-
-touch /ssd/etc/masterimage
-
-if [ -d /ssd/etc/ ] ; then
-    # We dont want udev to mount our root device while we're booting...
-    if [ -d /ssd/etc/udev/ ] ; then
-        echo "/dev/${device}" >> /ssd/etc/udev/mount.blacklist
-    fi
-fi
-
-umount /ssd
-umount /rootmnt
-
-echo "Preparing boot partition..."
-mount $bootfs /ssd
-
-EFIDIR="/ssd/EFI/BOOT"
-mkdir -p $EFIDIR
-cp /run/media/$1/vmlinuz /ssd
-# Copy the efi loader
-cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR
-
-if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
-    GRUBCFG="$EFIDIR/grub.cfg"
-    cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG
-    # Update grub config for the installed image
-    # Delete the install entry
-    sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
-    # Delete the initrd lines
-    sed -i "/initrd /d" $GRUBCFG
-    # Delete any LABEL= strings
-    sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
-    # Delete any root= strings
-    sed -i "s/ root=[^ ]*/ /" $GRUBCFG
-    # Add the root= and other standard boot options
-    sed -i "s@linux /vmlinuz *@linux /vmlinuz root=$rootfs rw $rootwait quiet @" $GRUBCFG
-fi
-
-if [ -d /run/media/$1/loader ]; then
-    GUMMIBOOT_CFGS="/ssd/loader/entries/*.conf"
-    # copy config files for gummiboot
-    cp -dr /run/media/$1/loader /ssd
-    # delete the install entry
-    rm -f /ssd/loader/entries/install.conf
-    # delete the initrd lines
-    sed -i "/initrd /d" $GUMMIBOOT_CFGS
-    # delete any LABEL= strings
-    sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
-    # delete any root= strings
-    sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
-    # add the root= and other standard boot options
-    sed -i "s@options *@options root=$rootfs rw $rootwait quiet @" $GUMMIBOOT_CFGS
-    # Add the test label
-    echo -ne "title test\nlinux /test-kernel\noptions root=$testfs rw $rootwait quiet\n" > /ssd/loader/entries/test.conf
-fi
-
-umount /ssd
-sync
-
-echo "Remove your installation media, and press ENTER"
-
-read enter
-
-echo "Rebooting..."
-reboot -f