diff options
Diffstat (limited to 'yocto-poky/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb')
-rw-r--r-- | yocto-poky/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb | 155 |
1 files changed, 0 insertions, 155 deletions
diff --git a/yocto-poky/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb b/yocto-poky/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb deleted file mode 100644 index 86c614a63..000000000 --- a/yocto-poky/meta/recipes-devtools/bootchart2/bootchart2_0.14.8.bb +++ /dev/null @@ -1,155 +0,0 @@ -# Copyright (c) 2013 LG Electronics, Inc. -# Copyright (C) 2014 Intel Corp. - -# This recipe creates packages for the bootchart2 system-wide profiler daemon -# and related utilities. Depending on the images you're building, additional -# configuration may be needed in order to use it. -# -# Packages: -# * bootchart2 - The daemon itself. -# * pybootchartgui - Python program to visualize and display the data -# collected by bootchart2 or compatible daemons such as the original -# bootchart. -# * bootchartd-stop-initscript - A SysV init script to stop data collection -# when booting completes (see below for details.) -# -# While bootchart2 is designed to stop collecting data roughly when the boot -# process completes, it is not exactly a stopwatch. It has a list of programs -# which are supposed signify that the boot process has completed (for example, -# openbox or gnome-shell,) but it waits a full 20 seconds after such a program -# is launched before stopping itself, to collect additional data. -# -# If you are using a window manager or GUI which isn't included in bootchart2's -# default configuration file, you should write bbappend file to amend -# bootchartd.conf and add it to EXIT_PROC. An example of this is shown in this -# recipe, where the Matchbox window manager (used by Sato) is added. -# -# If you want data collection to end at a certain point exactly, you should -# arrange for the following command to be run: -# bootchartd stop -# You might set this command to be launched by the desktop environment shipped -# on the image you're building after the other startup programs are complete. -# This will not incur the 20 second wait period and will cause bootchart2 to -# behave a bit more like a stopwatch. An example of this is shown in this -# recipe, specifically the bootchartd-stop-initscript package, which stops data -# collection as the last action when switching to runlevels 2 through 5. You can -# add bootchartd-stop-initscript to IMAGE_INSTALL if you need to use it. -# -# Unless you're doing something special, if your image does not launch an X -# window manager, you will need to add bootchartd-stop-initscript to your image. -# -# Bootchart2 can be started in two ways. Data collection can be initiated by -# running the following command: -# bootchartd start -# However, for the most complete data, the bootchart2 developers recommend -# running it as PID 1. This can be done by adding the following to the kernel -# command line parameters in the bootloader setup: -# init=/sbin/bootchartd -# When invoked this way, bootchart2 will set itself up and then automatically -# run /sbin/init. For example, when booting the default qemux86 image, one might -# use a command like this: -# runqemu qemux86 bootparams="initcall_debug printk.time=y quiet \ -# init=/sbin/bootchartd" -# -# Neither method is actually implemented here, choose what works for you. -# -# If you are building your image with systemd instead of SysV init, bootchart2 -# includes systemd service files to begin collection automatically at boot and -# end collection automatically 20 seconds after the boot process has completed. -# However, be aware that systemd tends to start bootchart2 relatively late into -# the boot process, so it's highly recommended to use bootchart2 as PID 1. If -# you're using systemd and you wish to use another method to stop data -# collection at a time of your choosing, you may do so as long as you get to it -# before the 20 second timeout of the systemd service files. Also, you may write -# a bbappend to patch bootchart2-done.timer.in to increase or decrease the -# timeout. Decreasing it to 0 will make it behave like -# bootchartd-stop-initscript. -# -# By default, when data collection is stopped, a file named bootchart.tgz will -# be created in /var/log. If pybootchartgui is included in your image, -# bootchart.png will also be created at the same time. However, this results in -# a noticeable hitch or pause at boot time, which may not be what you want on an -# embedded device. So you may prefer to omit pybootchartgui from your image. In -# that case, copy bootchart.tgz over to your development system and generate -# bootchart.png there. To get pybootchartgui on your development system, you can -# either install it directly from some other source, or build bootchart2-native -# and find pybootchartgui in the native sysroot: -# bitbake bootchart2-native -# ./tmp/sysroots/x86_64-linux/usr/bin/pybootchartgui /path/to/bootchart.tgz -# Note that, whether installed on your build system or on your image, the -# pybootchartgui provided by this recipe does not support the -i option. You -# will need to install pybootchartgui by other means in order to run it in -# interactive mode. - -SUMMARY = "Booting sequence and CPU,I/O usage monitor" -DESCRIPTION = "Monitors where the system spends its time at start, creating a graph of all processes, disk utilization, and wait time." -AUTHOR = "Wonhong Kwon <wonhong.kwon@lge.com>" -HOMEPAGE = "https://github.com/mmeeks/bootchart" -LICENSE = "GPL-3.0" -LIC_FILES_CHKSUM = "file://COPYING;md5=44ac4678311254db62edf8fd39cb8124" - -UPSTREAM_CHECK_GITTAGREGEX = "(?P<pver>\d+\.\d+(\.\d+)*)" - -SRC_URI = "git://github.com/mmeeks/bootchart.git \ - file://bootchartd_stop.sh \ - " - -S = "${WORKDIR}/git" -SRCREV = "48e0071048564c6af75ab969e842d6dec808da09" - -inherit systemd -inherit update-rc.d -inherit pythonnative - -# The only reason to build bootchart2-native is for a native pybootchartgui. -BBCLASSEXTEND = "native" - -SYSTEMD_SERVICE_${PN} = "bootchart2.service bootchart2-done.service bootchart2-done.timer" - -UPDATERCPN = "bootchartd-stop-initscript" -INITSCRIPT_NAME = "bootchartd_stop.sh" -INITSCRIPT_PARAMS = "start 99 2 3 4 5 ." - -# We want native pybootchartgui to execute with the correct Python interpeter. -do_compile_append_class-native () { - echo "#! ${PYTHON}" | cat - ${S}/pybootchartgui.py > ${WORKDIR}/temp_pybootchartgui - mv ${WORKDIR}/temp_pybootchartgui ${S}/pybootchartgui.py - chmod +x ${S}/pybootchartgui -} - -do_compile_prepend () { - export PY_LIBDIR="${libdir}/${PYTHON_DIR}" - export BINDIR="${bindir}" - export LIBDIR="${base_libdir}" -} - -do_install () { - install -d ${D}${sysconfdir} # needed for -native - export PY_LIBDIR="${libdir}/${PYTHON_DIR}" - export BINDIR="${bindir}" - export DESTDIR="${D}" - export LIBDIR="${base_libdir}" - - oe_runmake install - install -d ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/bootchartd_stop.sh ${D}${sysconfdir}/init.d - - echo 'EXIT_PROC="$EXIT_PROC matchbox-window-manager"' >> ${D}${sysconfdir}/bootchartd.conf -} - -PACKAGES =+ "pybootchartgui" -FILES_pybootchartgui += "${libdir}/python*/site-packages/pybootchartgui ${bindir}/pybootchartgui" -RDEPENDS_pybootchartgui = "python-pycairo python-compression python-image python-textutils python-shell python-compression python-codecs" -RDEPENDS_${PN}_class-target += "${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'sysvinit-pidof', 'procps', d)}" -RDEPENDS_${PN}_class-target += "lsb" -DEPENDS_append_class-native = " python-pycairo-native" - -PACKAGES =+ "bootchartd-stop-initscript" -FILES_bootchartd-stop-initscript += "${sysconfdir}/init.d ${sysconfdir}/rc*.d" - -FILES_${PN} += "${base_libdir}/bootchart/bootchart-collector" -FILES_${PN} += "${base_libdir}/bootchart/tmpfs" -FILES_${PN} += "${libdir}" -FILES_${PN}-doc += "${datadir}/docs" - -RCONFLICTS_${PN} = "bootchart" |